I am trying to update the HTC software on my phone. I take to understand the flash will include a radio baseband upgrade which will improve LTE signal lock.
That will be nice, since Sprint has rolled out LTE service here in Baltimore.
Code:
Software version
1.13.651.1 710RD
PRI Version
2.28_003
PRL Version
25006
Android version
4.0.3
HTC Sense version
4.0
Baseband version:
1.02.12.0427
Build number
1.13.651.1_R2 CL60201 release-keys
Firmware update: "No firmware update available"
Rooted: YES
Bootloader unlocked: NO
Many bloatware apps Disabled (Google, HTC, Sprint)
*** TAMPERED ***
*** LOCKED ***
JEWEL PVT SHIP S-ON RL
HBOOT-1.12.0000
RADIO-1.02.12.0427
OpenDSP-v25.1.0.32.0405
When I hit up System Updates>HTC Software Update, it tells me
A system update is available.
System update 1.22.651.3 (41.7 MB)
I DL'd the package, and tried to install it. When the phone reboots, I get a Red Exclamation Mark. Forcing a reboot, and it hangs with a white HTC screen. Forcing a reboot again, I can get back to my home screen.
Some things have updated, or changed, because I previously disabled the default launcher Rosie.apk in favor of ADWLauncherEX, and now the default is back.
I tried Temp unrooting (via Voodoo) and repeating the process, no difference.
I'm guessing you took the ota without restoring the stock recovery first
om4 said:
I'm guessing you took the ota without restoring the stock recovery first
Click to expand...
Click to collapse
Thanks, but that is definitely not right. Sorry if I wasn't clear in in the OP.
I do not have an unlocked bootloader, so I never modified the stock recovery.
Just checking, phone states tampered, since you are locked you are limited to trying an ruu. It should get you going
Hmmm... actually, I just rebooted into the bootloader, then selected Recovery.
I got a few seconds of green triangle with down arrow, then it went to Red Exclamation Mark.
And then after about 2 min, it restarts on its own.
So maybe this problem isn't strictly about my HTC software upgrade?
Or maybe it started there and now persists? I believe I've booted into recovery successfully in the past...
I tried adb reboot recovery, and it gave the same results.
Hmmmm...
om4 said:
Just checking, since you are locked you are limited to trying an ruu. It should get you going
Click to expand...
Click to collapse
I appreciate the reminder that ruu is an option, but I didn't really learn or understand anything like that.
Since the phone actually functions fine, that seems like a rather drastic step.
Also, it blows away everything I have on the phone, which will be annoying to restore.
I'm having trouble understanding the problem. I was thinking the phone didn't boot android at all. If the phone boots fine then yeah that is a drastic step.
om4 said:
I'm having trouble understanding the problem. I was thinking the phone didn't boot android at all
Click to expand...
Click to collapse
When I tried to do HTC System Update, it rebooted and gave the Red Exclamation recovery, and just hung there.
That's not what is supposed to happen, is it?
It shouldn't hang it should show the phone with a progress meter, I wonder if the update was bad. I'm not too familiar since I don't ever accept ota updates
It looks like from your original post that you removed bloatware. You need to restore these apps to be able to install the OTA update. See this thread on more information and how to accomplish this. Let me know if you have further questions but that is why it is failing with the red exclamation point. If you press volume up and the power button there should be some explanation of what app it is failing on. Anyway, good luck. If it is a lot of bloatware you removed it could be tedious to restore all of them.
OK, I don't know what is going on here, but I guess I don't care. I was going to get to this eventually so I think the answer is going to be this:
Back up everything
S-OFF with LazyPanda (which will clear all data on my phone)
http://forum.xda-developers.com/showthread.php?t=1737123
Flash custom Recovery
TWPR
http://forum.xda-developers.com/showthread.php?t=1675738
or maybe CWM
http://forum.xda-developers.com/showthread.php?t=1675430
Re-root if necessary
http://forum.xda-developers.com/showthread.php?t=1671577
Flash new radio manually
http://forum.xda-developers.com/showthread.php?t=1704612
Wait patiently for CM10
I can always S-ON later if I need to
http://forum.xda-developers.com/showthread.php?p=28133124
credit:
compiled links from these two excellent threads
F.A.Q.s - Massive Question Round Up Thread
http://forum.xda-developers.com/showthread.php?t=1693205
HTC EVO4G LTE Tutorial/Vids ● ROMs ● How 2 Root ● Radios ● More
http://forum.xda-developers.com/showthread.php?t=1645890
I think that's your best option since you have 1.12. There are people that would kill for that hboot. Once you get soff just flash the firmware zip and upgrade everything but recovery, hboot and kernel.
Sent from my EVO using xda premium
ScottHW said:
OK, I don't know what is going on here, but I guess I don't care. I was going to get to this eventually so I think the answer is going to be this:
Back up everything
S-OFF with LazyPanda (which will clear all data on my phone)
http://forum.xda-developers.com/showthread.php?t=1737123
Flash custom Recovery
TWPR
http://forum.xda-developers.com/showthread.php?t=1675738
or maybe CWM
http://forum.xda-developers.com/showthread.php?t=1675430
Re-root if necessary
http://forum.xda-developers.com/showthread.php?t=1671577
Flash new radio manually
http://forum.xda-developers.com/showthread.php?t=1704612
Wait patiently for CM10
I can always S-ON later if I need to
http://forum.xda-developers.com/showthread.php?p=28133124
credit:
compiled links from these two excellent threads
F.A.Q.s - Massive Question Round Up Thread
http://forum.xda-developers.com/showthread.php?t=1693205
HTC EVO4G LTE Tutorial/Vids ● ROMs ● How 2 Root ● Radios ● More
http://forum.xda-developers.com/showthread.php?t=1645890
Click to expand...
Click to collapse
I'm pretty sure you need to be rooted to run lazy panda I think you stated your bootloader was locked?
bigdaddy619 said:
I'm pretty sure you need to be rooted to run lazy panda I think you stated your bootloader was locked?
Click to expand...
Click to collapse
Ummm... I am rooted, but do NOT have an Unlocked Bootloader.
I took to understand that LazyPanda would give me S-OFF, which would allow me to flash a custom recovery (TWRP), and thus manually flash radios, kernels, custom ROMs, etc.
I guess possibly there is a fine distinction between S-OFF and Unlocked Bootloader that I might be missing...
Related
So I have Scott's CleanROM GBE 1.7.5 on my phone. I was wandering through my phone's settings, and accidentally hit something in the update area. I do not know what I was thinking, but I know I expected it to ask me if I was sure I wanted to update. So far it has only done the first part where it prepares the phone for the update. I do not know when the other part is coming but I assume it is automatic. I was planning on updating to a rooted ICS once I felt comfortable with it (just seemed a little harder than my original flash of rooted GB). So if it would be easier to just update to ICS some way now, I would be very willing to do that. I am s-on, I believe I installed Amon Ra, but I am not sure how to check and not sure if I have an actual recovery rom or not.
I checked around and found similar problems, but nothing really like mine since my update has not gone all the way thru yet. If anyone could help, it would be greatly appreciated. THank you.
Easiest way is to relock your bootloader, run the newest ruu, unlock and flash recovery again. That way you will be set up to run any ics Rom without having to worry about flashing a patch
Sent from my ADR6425LVW using Tapatalk 2
pwned3 said:
Easiest way is to relock your bootloader, run the newest ruu, unlock and flash recovery again. That way you will be set up to run any ics Rom without having to worry about flashing a patch
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Ok just to make sure I know and don't mess anything else up. I relock (should be easy to.find a guide) . Then run the update on my phone? Then unlock thru HTC again, and flash the actual amon or CWM to my phone? And from there I will be able to flash any ICS Rom with more ease?
And thank you for the quick reply.
Edit: I searched the internet more for less-similar situations. I think all I have to do is re-lock. Download the newest RUU from Android police and put it in the root of the SD card as PH98IMG.zip (I'm assuming it should be the internal memory, but please correct me if I am wrong.) Hold volume down & power to boot into bootloader, then the phone takes it from there?
Also,nothing I have to do as far as unrooting?
malignancyy said:
Also,nothing I have to do as far as unrooting?
Click to expand...
Click to collapse
Nope just relock the bootloader
AshtonTS said:
Nope just relock the bootloader
Click to expand...
Click to collapse
Okay, thanks a lot. And I edited this into a prior post, but I just wanted to make sure:
I have to re-lock. Download the newest RUU from Android police and put it in the root of the SD card as PH98IMG.zip (I'm assuming it should be the internal memory, but please correct me if I am wrong.) Hold volume down & power to boot into bootloader, then the phone takes it from there?
malignancyy said:
Okay, thanks a lot. And I edited this into a prior post, but I just wanted to make sure:
I have to re-lock. Download the newest RUU from Android police and put it in the root of the SD card as PH98IMG.zip (I'm assuming it should be the internal memory, but please correct me if I am wrong.) Hold volume down & power to boot into bootloader, then the phone takes it from there?
Click to expand...
Click to collapse
Then you just have to press continue when it tells you to.
PS: Another way to get to the bootloader is to use adb (make sure USB debugging is enabled on your phone)
Command:
adb reboot bootloader
I find it easier than holding down buttons for a long time, but that's just my personal preference.
(Also, most custom ROMs can reboot to bootloader from within the ROM. I forget if CleanROM GBE includes the advanced power menu.)
pwned3 said:
Easiest way is to relock your bootloader, run the newest ruu, unlock and flash recovery again. That way you will be set up to run any ics Rom without having to worry about flashing a patch
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Good advise, and if he RUUs to ICS, then he should not even get asked to install the update because it will already be installed on his phone.
Also RUU twice. Just reboot into bootloader right away and install the RUU a second time. Then boot up normally and remove the zip file from the sdcard.
Thanks, you all helped a lot. I was able to get the stock rom, rooted, and running smoothly. But, once I tried to install custom roms I had problems. I decided to S-off to make it easier from here on out. After a few tries, it said I had successfully done the S-off. I tried to install Juopunutbear custom hboot, directly afterwards and it said it installed but I was stuck on the Juopunutbear screen. After this, I have not been able to get past hboot.I do not think the custom hboot actually installed. It is saying from the top:
***TAMPERED***
***LOCKED***
VIGOR PVT SHIP S-OFF RL
HBOOT-2.27.0000
RADIO-2.22.10.0801r/2.22.10.0803r
OpenDSP-v14.6.0.7708.00.0507
eMMC-boot
Aug 6 2012, 19:24:37
My external sd card needed formatting, so I just did that. And my plan is to RUU again (i guess twice), flash recovery (when clicked on currently, nothing happens), I guess root although I am not sure about this part, then try to install a custom rom.
Didn't want to make another thread just to check on this, but does this sound about right?
And as far as installing rom since I am now s-off, just go to recovery and flash it, nothing else at all to worry about?
malignancyy said:
Thanks, you all helped a lot. I was able to get the stock rom, rooted, and running smoothly. But, once I tried to install custom roms I had problems. I decided to S-off to make it easier from here on out. After a few tries, it said I had successfully done the S-off. I tried to install Juopunutbear custom hboot, directly afterwards and it said it installed but I was stuck on the Juopunutbear screen. After this, I have not been able to get past hboot.I do not think the custom hboot actually installed. It is saying from the top:
***TAMPERED***
***LOCKED***
VIGOR PVT SHIP S-OFF RL
HBOOT-2.27.0000
RADIO-2.22.10.0801r/2.22.10.0803r
OpenDSP-v14.6.0.7708.00.0507
eMMC-boot
Aug 6 2012, 19:24:37
My external sd card needed formatting, so I just did that. And my plan is to RUU again (i guess twice), flash recovery (when clicked on currently, nothing happens), I guess root although I am not sure about this part, then try to install a custom rom.
Didn't want to make another thread just to check on this, but does this sound about right?
And as far as installing rom since I am now s-off, just go to recovery and flash it, nothing else at all to worry about?
Click to expand...
Click to collapse
The jbear hboot might have failed because you are on the newest global update with 2.27 hboot, and I believe the controlbear tool still has the 2.25 hboot. (someone correct me if I'm wrong)
I think there is an unguarded 2.27 hboot somewhere, so you should flash that manually.
Sent from my NeoMax Rezound
Right now, like I said the hboot says at the top 2.27.0000
When I reboot from there, or boot it regularly it goes to a JuopunutBear, black and green writing screen.
I have tried to install this forum.xda-developers.com/showthread.php?t=1843030 ([HBOOT] HBoot 2.27 (from 4.03.605 OTA) Unlocked) from both, but cannot figure out how to do so.
edit: within JuopunutBear, wiping says "can't open" and applying update gives "failed to open loopdevice" and "failed to mount /sdcard" when I try to update.
Within the regular hboot, I get "no image" as it searches for files.
Well, I put the same file on a new sd card, and it worked on the first try, kinda.
Now it appears my phone is bricked. It will not boot at all. She barely lasted a few hours s-off before I messed it up. Any tips anyone out there can give to this sad fellow, or am I off to get a replacement?
A little more info on this. Windows tries installing QHUSB_DLOAD driver for it when plugged in, but unsuccessfully. The charging indicator does not come on either. Have tried to turn it on plugged in with battery out, and battery in both ways.
malignancyy said:
Well, I put the same file on a new sd card, and it worked on the first try, kinda.
Now it appears my phone is bricked. It will not boot at all. She barely lasted a few hours s-off before I messed it up. Any tips anyone out there can give to this sad fellow, or am I off to get a replacement?
Click to expand...
Click to collapse
Depending on what caused the brick, it may be recoverable.
Check out the unbricking thread in the dev section.
Sent from my NeoMax Rezound
Wanted to post this in the NeoMax thread, but I am currently not allowed to. I gave up on my last Rezound, and am getting a replacement here soon. I did a bunch of reading before and after I got my Rezound, and a bunch more the past few days as I wanted to get an ICS rom. Unfortunately, the one time I deferred from guides I followed (installing the JBear hboot), I killed my Rezound. I now want to stay S-on, at least until I gain some more familiarity and skill with this whole process.
What I plan on doing is once I get the Rezound, installing the OTA update, possibly having to wait for it to do so. I assume this would be the newest, .2, global update. I plan to unlock, flash recovery, then root. The rom I really want however is NeoMax. There are limited instructions on how I go about this. But from what I understand I change the filename to PH98IMG and flash it from hboot? The file name is originally, GlobalRuuPH98IMG.zip, but the thread title claims ICS De-Sensed 3.14.605.12, which I believe is two versions prior. So here I am lost. If it is in fact older, I have to flash the rom through recovery, then flash the kernel, correct? If so, do I just use the 3.14.605 that was in the NeoMax thread?
Sorry to bother you all with what i'm sure others have done many times. Like I said, I have read a lot on this, its just that I either did not understand in the least what the guides were saying, or it seemed like this situation was much different. And on a side note, if there is any other rom out there that someone would recommend that would make this easier (such as being on the latest kernel), I wouldn't be opposed to trying it. I just want one that is desensed, as it is one of my main reasons for wanting a custom rom.
malignancyy said:
Wanted to post this in the NeoMax thread, but I am currently not allowed to. I gave up on my last Rezound, and am getting a replacement here soon. I did a bunch of reading before and after I got my Rezound, and a bunch more the past few days as I wanted to get an ICS rom. Unfortunately, the one time I deferred from guides I followed (installing the JBear hboot), I killed my Rezound. I now want to stay S-on, at least until I gain some more familiarity and skill with this whole process.
What I plan on doing is once I get the Rezound, installing the OTA update, possibly having to wait for it to do so. I assume this would be the newest, .2, global update. I plan to unlock, flash recovery, then root. The rom I really want however is NeoMax. There are limited instructions on how I go about this. But from what I understand I change the filename to PH98IMG and flash it from hboot? The file name is originally, GlobalRuuPH98IMG.zip, but the thread title claims ICS De-Sensed 3.14.605.12, which I believe is two versions prior. So here I am lost. If it is in fact older, I have to flash the rom through recovery, then flash the kernel, correct? If so, do I just use the 3.14.605 that was in the NeoMax thread?
Sorry to bother you all with what i'm sure others have done many times. Like I said, I have read a lot on this, its just that I either did not understand in the least what the guides were saying, or it seemed like this situation was much different. And on a side note, if there is any other rom out there that someone would recommend that would make this easier (such as being on the latest kernel), I wouldn't be opposed to trying it. I just want one that is desensed, as it is one of my main reasons for wanting a custom rom.
Click to expand...
Click to collapse
Don't worry, you're not bothering anyone.
The people who claim to have bricked their phones when they have a boot loop and say nothing about their rom and firmware are bothering people.
Keep doing what you are currently doing and people will always be willing to help you.
Ok, so back to helping...
Of you're starting on GB, make sure you update to 3.14.605.12 before updating to the most recent one.
If you update via OTA then you don't need to worry.
Keep in mind that NeoMax is based off of the 3.14.605.12 build, so you'll have to mix n match the right way to get it to work on the latest firmware.
I believe it was you have to use the new kernel if you use the new radios and hboot.
So after installing NeoMax, flash the PH98IMG that contains the newer kernel, not the 3.14.605.12 version.
Or use fastboot to flash the kernel. (my preferred method while s-on)
Sent from my NeoMax Rezound
PS: A good way to get the required 10 posts to post in the dev section is post random stuff in the off topic thread.
wlmeng11 said:
Don't worry, you're not bothering anyone.
The people who claim to have bricked their phones when they have a boot loop and say nothing about their rom and firmware are bothering people.
Keep doing what you are currently doing and people will always be willing to help you.
Ok, so back to helping...
Of you're starting on GB, make sure you update to 3.14.605.12 before updating to the most recent one.
If you update via OTA then you don't need to worry.
Keep in mind that NeoMax is based off of the 3.14.605.12 build, so you'll have to mix n match the right way to get it to work on the latest firmware.
I believe it was you have to use the new kernel if you use the new radios and hboot.
So after installing NeoMax, flash the PH98IMG that contains the newer kernel, not the 3.14.605.12 version.
Or use fastboot to flash the kernel. (my preferred method while s-on)
Sent from my NeoMax Rezound
PS: A good way to get the required 10 posts to post in the dev section is post random stuff in the off topic thread.
Click to expand...
Click to collapse
As far as which kernel, this is what was said in the NeoMAX Q&A:
Q: "I flashed your rom and my phone gets really hot after a while. In fact, Ive noticed it on all the newer roms lately. What could be causing it and how can I attempt to fix it?"
A: "Make sure you have updated your radio to the latest available and then flash the 2nd to latest kernel. This combination has been known to have the best rom performance for all my roms and decreased heat"
SO this means I should use the 4.03.605.1? And the newest radio will automatically still be on there from the OTA update, or will I have to flash those as well? I have no experience in flashing radios so this is new ground to me.
malignancyy said:
As far as which kernel, this is what was said in the NeoMAX Q&A:
Q: "I flashed your rom and my phone gets really hot after a while. In fact, Ive noticed it on all the newer roms lately. What could be causing it and how can I attempt to fix it?"
A: "Make sure you have updated your radio to the latest available and then flash the 2nd to latest kernel. This combination has been known to have the best rom performance for all my roms and decreased heat"
SO this means I should use the 4.03.605.1? And the newest radio will automatically still be on there from the OTA update, or will I have to flash those as well? I have no experience in flashing radios so this is new ground to me.
Click to expand...
Click to collapse
That QA is outdated.
It was referring to using the 3.14.605.07 kernel as opposed to the then-most-recent 3.14.605.10
Back then those two builds were similar enough that they could mix n match without issues.
Between 3.14.605.12 and 4.03.605.1 is a lot of changes. (whole number change to represent it) Specifically, new hboot and radios. Therefore, it is incompatible with the older kernels.
When you're S-ON you can't touch the radios except through an official RUU.
Even with s-off I doubt you can flash radios from recovery (not sure on this one), and NeoMax doesn't have any radio files anyway. (nor does any rom I know for this phone)
If you haven't yet updated to 4.03.605.1 then I recommend that you stay on 3.14.605.12 until Neo updates the ROM.
If you already updated, it is still possible to run NeoMax. You just have to manually flash the new 4.03.605.1 kernel after installing the ROM.
Sent from my NeoMax Rezound
I successfully installed Fresh Evo LTE 5.3.1 on my phone.
One of the suggestions is to update the Radio but I'm having a tough time doing that.
Here are my specs:
HBOOT 1.15.0000
S-ON
FreshEVO 5.3.1 ROM
I went to the link from the FreshEVO LTE 5.3.1 page to update the radio and have tried the following to install the Radio:
Attempt 1
Downloaded the Full Firmware zip file
Rename it "PJ75IMG"
Place it in the root of my SD card
Reboot into Bootloader
The PJ75IMG.zip file is detect but I only get 'Parsing PJ75IMG.zip' and then the Fastboot, Recovery, etc. options are displayed.
Attempt 2
From the same page where I downloaded the Full Firmware zip file, I also tried:
Download the Boot.img Only (signed) file
Flash it through the command prompt while in Fastboot ("fastboot flash boot boot.img")
Go into Bootloader
The PJ75IMG.zip is detected but still get the "Parsing..." message and nothing else happens.
Attempt 3
I have also tried going into my TWRP recovery and installing the Full Firmware zip AND the Radio 1.12.11.0809 Only.zip file but the installation fails.
Any pointers or a link to a video or a post would be much appreciated.
Thanks and sorry if this is a duplicate post but I really couldn't find any post that showed step-by-step process.
revert to stock and accept the ota, you can then fastboot recovery again and reflash. hboot 1.15 can not directly flash any firmware
edit: you may have to relock your hboot but ive seen users state they didnt. if you decide to relock the phone you will have to unlock the bootloader again to enable fastboot
om4 said:
The easiest way to update your firmware is to revert to stock and accept the ota, you can then fastboot recovery again and reflash
Click to expand...
Click to collapse
I don't have my stock backup anymore.
I've heard stuff about using RUU or something like that. Any quick guide on how to revert back to stock?
DO NOT UNROOT TO ACCEPT THE OTA OR RUU
I'd highly suggest just staying with your current radios and waiting for S-OFF before trying to update the radios. You can still flash the new ROMS in the meantime
You cannot update radios or firmware with Hboot 1.15 or 1.19------->Thats why it is suggested and not required
Rxpert said:
DO NOT UNROOT TO ACCEPT THE OTA OR RUU
I'd highly suggest just staying with your current radios and waiting for S-OFF before trying to update the radios. You can still flash the new ROMS in the meantime
You cannot update radios or firmware with Hboot 1.15 or 1.19------->Thats why it is suggested and not required
Click to expand...
Click to collapse
Thanks for the warning.
Since I'm pretty new to all this, I'll play it safe and stick to what I have.
sorry guys internet crapped out and i got stuck trying to post lol. rxpert has a point but with so much negativity about s-off never coming I'm starting to consider taking the OTA.
also you should always have a back up, its your go to solution when nothing else seems to be working since its a back up of when everything was new and working be it stock or custom
The new radios aren't worth losing the possibility, no matter how small
Sent from my EVO using Tapatalk 2
True...
om4 said:
sorry guys internet crapped out and i got stuck trying to post lol. rxpert has a point but with so much negativity about s-off never coming I'm starting to consider taking the OTA.
also you should always have a back up, its your go to solution when nothing else seems to be working since its a back up of when everything was new and working be it stock or custom
Click to expand...
Click to collapse
Just so I am clear, I too am 1.5 so if have my orginal rom, (the one after I unlocked my bootloader) i can restore it and accept the OTA without having to relock my phone? (it wont brick):good: Or do i have some other steps to take, I read the don't panic instructions, but it only mentioned what the OTA does ( relocks with a new rom) but nothing about what happens if I don't relock before I accept the OTA, I know i seem a bit slow, 4g lte isn't as interesting as OG 4g without S-off.
RamesisX said:
Just so I am clear, I too am 1.5 so if have my orginal rom, (the one after I unlocked my bootloader) i can restore it and accept the OTA without having to relock my phone? (it wont brick):good: Or do i have some other steps to take, I read the don't panic instructions, but it only mentioned what the OTA does ( relocks with a new rom) but nothing about what happens if I don't relock before I accept the OTA, I know i seem a bit slow, 4g lte isn't as interesting as OG 4g without S-off.
Click to expand...
Click to collapse
I havent yet done it myself but users have said they didnt need to relock, how ever as captain said there is no real need to update right now. If you decide to go ahead it would be a good idea to relock ( fastboot oem lock ) just to make sure, you can unlock afterwards. I neglect to mention this in my guide because most phones now are on 1.19 anyway and those still on 1.15 are holding out for soff
You will want to have the stock recovery to take the ota. Most people do this by relocking and running the ruu
Once again, I'm providing the info but I don't recommend it
Sent from my EVO using Tapatalk 2
Rxpert said:
You will want to have the stock recovery to take the ota. Most people do this by relocking and running the ruu
Once again, I'm providing the info but I don't recommend it
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I am still researching how to relock without issues. I have my orginal rom but still leary about the entire relocking process. I was hoping i could restore to orginal sense rom, then take the OTA. otherwise I am looking for the simplest way to accompish the relocking task, but frankly nothing is easy when i comes to playing around with 4g lte, except it is rather difficult to brick. With my luck i might succeed in that LMAO
:good::laugh:
RamesisX said:
I am still researching how to relock without issues. I have my orginal rom but still leary about the entire relocking process. I was hoping i could restore to orginal sense rom, then take the OTA. otherwise I am looking for the simplest way to accompish the relocking task, but frankly nothing is easy when i comes to playing around with 4g lte, except it is rather difficult to brick. With my luck i might succeed in that LMAO
:good::laugh:
Click to expand...
Click to collapse
there is no simpler method for relocking hboot, simply fastboot oem lock
om4 said:
there is no simpler method for relocking hboot, simply fastboot oem lock
Click to expand...
Click to collapse
Used that and it worked great.
Evo 4G LTE
h-boot 1.19, s-on, HTCDev unlocked
Hi guys, I've searched the forums for days now and tried many recovery methods, all which end in failure.
Basically my Evo which is on cyanogenmod is stuck on the wrong kernel, and I now have zero reception.
I even tried going into sprint, but their tech told me the first step towards recovery is going to be installing the right kernel.before I can do anything or get service again. He even let me take a picture of the Kernel info on an EVO LTE in the store.
The method of HOW to install the right kernel is where I am completely at a loss and would appreciate help.
I believe I'm looking for Odin
Stock Kernel
Stock Rom
and the steps it takes to do it
I am rooted.
I have TWRP v.2.2.2.0
Here is what my Hboot looks like.
***TAMPERED ***
***UNLOCKED***
JEWEL PVT SHIP S-0N RL
HBOOT 1.12.0000
RADIO. 1.02.12.0427
OpenDSP-v25.1.0.32.0405
eMMC-boot apr 26 2012, 19:54:01
I have tried multiple RUU's which end in Failure and errors.
I've tried placing a stock recovery image and flashing it through Hboot.
UPDATE: someone told me I need to re-lock before I can flash a RUU.
so I re locked. and then ran an RUU and it finally completed successfully...
and now my phone has nothing but H boot.
no more TWRP
no more Rom
still have adb and electricity so if there is any way of saving my phone I'd appreciate any pointers.
UPDATE 2: after being stuck in fastboot only for the last 7 hours and trying all the recommended RUU's, I decided I'd try anything, so I re-did htc dev unlock.
I was then taken to my boot animation of cyanogen mod and nothing else.
I just rebooted into recovery and ::huzzah:: TWRP is still intact with 2 old backups of cyanogen mod.
I am going to be very careful of where I step next because all I've managed to do is dig myself deeper.
this is the one step forward in an otherwise downhill **** eating of grand magnitude.
I just read a google voicemail transcript for a video gig that I just lost because I never got the call.
I am thinking of installing the most stock rom I can, taking it into sprint, and claiming ignorance in hopes that they will just swap it out.
I'm now going to check if flashing the RUU_JEWEL_CL_JB_45_S_Sprint_WWE_3.15.651.16
got my reception back...
Here's to hoping!
Which ruu did you run? If an old ruu and you still have hboot 1.12, any time you flash a ROM the correct kernel will also be flashed in the process.
I've never used ruu before, but it seems weird to me that after RUU, there is no ROM on your phone.
Do you have an SD card and card reader and PC?
Also, your twrp version is very outdated.
Using fastboot, you should be able to fastboot flash recovery to update TWRP. If you're unsure how, om4 has a great guide in either the general or general sticky section.
Sent from my EVO using xda premium
t3chn0v1k1ng said:
Hi guys, I've searched the forums for days now and tried many recovery methods, all which end in failure.
Basically my Evo which is on cyanogenmod is stuck on the wrong kernel, and I now have zero reception.
I even tried going into sprint, but their tech told me the first step towards recovery is going to be installing the right kernel.before I can do anything or get service again. He even let me take a picture of the Kernel info on an EVO LTE in the store.
The method of HOW to install the right kernel is where I am completely at a loss and would appreciate help.
I believe I'm looking for Odin
Stock Kernel
Stock Rom
and the steps it takes to do it
I am rooted.
I have TWRP v.2.2.2.0
Here is what my Hboot looks like.
***TAMPERED ***
***UNLOCKED***
JEWEL PVT SHIP S-0N RL
HBOOT 1.12.0000
RADIO. 1.02.12.0427
OpenDSP-v25.1.0.32.0405
eMMC-boot apr 26 2012, 19:54:01
I have tried multiple RUU's which end in Failure and errors.
I've tried placing a stock recovery image and flashing it through Hboot.
UPDATE: someone told me I need to re-lock before I can flash a RUU.
so I re locked. and then ran an RUU and it finally completed successfully...
and now my phone has nothing but H boot.
no more TWRP
no more Rom
still have adb and electricity so if there is any way of saving my phone I'd appreciate any pointers.
Click to expand...
Click to collapse
Odin is the upgrade utility for Samsung, our equivalent is basically the HTC RUU packages. I would suggest re-running the ruu or running either 1.15 or 1.19 to restore the phone. If you want to continue using custom roms you should go to unlimited.io and follow the directions for soff
scottspa74 said:
Which ruu did you run? If an old ruu and you still have hboot 1.12, any time you flash a ROM the correct kernel will also be flashed in the process.
I've never used ruu before, but it seems weird to me that after RUU, there is no ROM on your phone.
Do you have an SD card and card reader and PC?
Also, your twrp version is very outdated.
Using fastboot, you should be able to fastboot flash recovery to update TWRP. If you're unsure how, om4 has a great guide in either the general or general sticky section.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
the RUU I flashed was "RUU_JEWEL_CL_JB_45_S_Sprint_WWE_3.15.651.16_Radio_1.12.11.1119_NV_2.87_003_25007_release_299302_signed.exe"
Also I just noticed I am upgraded to Hboot 2.09.0000
t3chn0v1k1ng said:
the RUU I flashed was "RUU_JEWEL_CL_JB_45_S_Sprint_WWE_3.15.651.16_Radio_1.12.11.1119_NV_2.87_003_25007_release_299302_signed.exe"
Also I just noticed I am upgraded to Hboot 2.09.0000
Click to expand...
Click to collapse
:what: Well... you can disregard that post about gaining s-off, that is a thing of the past now that you fully updated to the new baseband and hboot. If I might as (you don't have to answer as it doesn't really matter now) Why were you still s-on with hboot 1.12 in the first place??
mrrogers1 said:
:what: Well... you can disregard that post about gaining s-off, that is a thing of the past now that you fully updated to the new baseband and hboot. If I might as (you don't have to answer as it doesn't really matter now) Why were you still s-on with hboot 1.12 in the first place??
Click to expand...
Click to collapse
Honestly I have no idea.
I rooted my phone like the 2nd day I had it.
I also had on OG evo that I had rooted the entire time I owned it.
I never learned about s-off. I just wanted CM10, tethering, and adfree.
This is the reason for all of this to begin with:
on CM10, I had working 3G, but also 4G here and there.
my connection would drop out all the time to zero, or 1x.
Still had bars though, just no mobile data.
oh yea I have an air rave, does that make this story more fun?
anyway.
After getting a different answer, literally every time I went into sprint and asked about 4G.
It's on! it's coming next month! we have a repeater just in this area! it's coming on next month!
I decided it was my phones fault and that I need it back to factory.
I even have backups named "dec 2012 LTE works" and "DONT **** THIS UP"
And now I am here. twrp and fastboot are the only things I can access now.
I'm thinking of taking it into sprint with a stock image flashed
and letting it bootloop no matter what they try.
It'll still say "relocked" "tampered though"
I guess unrooting is my best next option?
I'm so clueless it's probably pretty funny to some of you.
the latest RUU I flashed is RUU_JEWEL_CL_JB_45_S_Sprint_WWE_3.15.651.16_Radio_1.12.11.1119_NV_2.87_003_25007_release_299302_signed (1).exe
does this mean my kernel and radio are updated now?
Yes should be. But now you may have more problems now with the new hboot then you had to begin with. Hboot 2.09 has more security features.
So I'm currently on Flyhalf's CM10.1 (S-ON), and I checked the recommended firmware/radios for the ROM and realized I'm outdated. It calls for Hboot 2.26 and radio 2.23.10.0123r, 2.23.10.0124r. but I'm on 2.25 and 1.22.10.0421r/1.22.10.0424r. I just updated to the latest version of the rom and I keep getting random bootlooping as well as the rom being way more unstable than the previous build I was on for about 4 months.
So, I'm trying to use Wildhorse's guide to updating firmware through RUU in hopes that it will solve my problems and it just plain isn't working. I've put the RUU in my external SD as PH98IMG, waited for my battery to charge to 90%, shut off the phone, pulled the battery, then gone into Hboot to flash it but I keep getting "No Image or Wrong Image" and it just goes back to the main Hboot screen every single time. Can anyone explain to me why this is happening even though I'm following everybody's directions exactly? I've been searching through the forums for about 2 hours now and I can't get an answer.
I'm still kind of new to HTC devices and how they work, so if anyone could help me figure this out I'd be very thankful.
BrahManty said:
So I'm currently on Flyhalf's CM10.1 (S-ON), and I checked the recommended firmware/radios for the ROM and realized I'm outdated. It calls for Hboot 2.26 and radio 2.23.10.0123r, 2.23.10.0124r. but I'm on 2.25 and 1.22.10.0421r/1.22.10.0424r. I just updated to the latest version of the rom and I keep getting random bootlooping as well as the rom being way more unstable than the previous build I was on for about 4 months.
So, I'm trying to use Wildhorse's guide to updating firmware through RUU in hopes that it will solve my problems and it just plain isn't working. I've put the RUU in my external SD as PH98IMG, waited for my battery to charge to 90%, shut off the phone, pulled the battery, then gone into Hboot to flash it but I keep getting "No Image or Wrong Image" and it just goes back to the main Hboot screen every single time. Can anyone explain to me why this is happening even though I'm following everybody's directions exactly? I've been searching through the forums for about 2 hours now and I can't get an answer.
I'm still kind of new to HTC devices and how they work, so if anyone could help me figure this out I'd be very thankful.
Click to expand...
Click to collapse
You are on a leaked firmware, the currently available RUUs are all older than that, and you can't go back when you are S-ON. You need to S-OFF then you can RUU back to 3.14.605.12 and then OTA back up to the current 4.5.605.14
acejavelin said:
You are on a leaked firmware, the currently available RUUs are all older than that, and you can't go back when you are S-ON. You need to S-OFF then you can RUU back to 3.14.605.12 and then OTA back up to the current 4.5.605.14
Click to expand...
Click to collapse
Okay, I was really hoping that wasn't the case. I hate to ask for more help, but I don't really understand how I'm supposed to get S-Off when I need to be on the stock RUU to do it, and I can't get on the stock RUU because I need to be S-Off to do so...
I hope I'm not stuck this way. Technically I'm on all the same software as I was yesterday, but now I'm getting random reboots all the time as well as bootloops that either go on for ten minutes or never end. I was on a build of CM10.1 from may with Amon Ra recovery, then tried to flash the newest TWRP that requires the new firmware (didn't realize I was on older firmware) and it bricked my phone. So I put on an older CWM recovery, tried to backup and it froze in the middle of every backup it tried to make. Put on an old TWRP, backups worked, so I flashed the newest version of CM10.1 (again not knowing I didn't have newest firmware) and that's when the bootlooping/rebooting started. I recovered to the old version of CM10.1 and the issue didn't go away, so now I'm just trying to figure out what I can do to get my phone in a usable state again.
BrahManty said:
Okay, I was really hoping that wasn't the case. I hate to ask for more help, but I don't really understand how I'm supposed to get S-Off when I need to be on the stock RUU to do it, and I can't get on the stock RUU because I need to be S-Off to do so...
I hope I'm not stuck this way. Technically I'm on all the same software as I was yesterday, but now I'm getting random reboots all the time as well as bootloops that either go on for ten minutes or never end. I was on a build of CM10.1 from may with Amon Ra recovery, then tried to flash the newest TWRP that requires the new firmware (didn't realize I was on older firmware) and it bricked my phone. So I put on an older CWM recovery, tried to backup and it froze in the middle of every backup it tried to make. Put on an old TWRP, backups worked, so I flashed the newest version of CM10.1 (again not knowing I didn't have newest firmware) and that's when the bootlooping/rebooting started. I recovered to the old version of CM10.1 and the issue didn't go away, so now I'm just trying to figure out what I can do to get my phone in a usable state again.
Click to expand...
Click to collapse
Hey, wait a sec... :laugh:
My bad, I just double checked, and with that Hboot/radio combination you are on stock ICS firmware already! Just RUU version 3.14.605.12, that should work without issues if done correctly and you should be back to pure ICS and can then allow the OTA to upgrade you in a few steps to 4.5.605.14
acejavelin said:
Hey, wait a sec... :laugh:
My bad, I just double checked, and with that Hboot/radio combination you are on stock ICS firmware already! Just RUU version 3.14.605.12, that should work without issues if done correctly and you should be back to pure ICS and can then allow the OTA to upgrade you in a few steps to 4.5.605.14
Click to expand...
Click to collapse
Oh, thank god. Hahah. I didn't remember ever flashing any leaked firmware before, so I was kind of confused there. I figured I may have done it somewhere in the unlocking/rooting process and just couldnt remember. Okay, thanks again for the help. RUU's have always confused me with the way they work. I should be stable in no time hopefully.
And now I'm having more issues... I can't use the Rom Updater because somethings wrong with my usb connection. I can plug it in and transfer files and such, but trying to use any ADB commands results in "Device not found" and the Rom Updater says it can't connect to my device either. My HTC Drivers are up to date, so I'm not sure why this is happening. Is there any way I can just get the PH98IMG.zip for 3.14.605.12 instead of having to use the RUU?
Not really sure what you are trying to run, I didn't think there was a 3.14.605.12 executable RUU, but use this page and instructions and grab the file: http://www.androidpolice.com/2012/0...cream-sandwich-ruu-for-final-ota-3-14-605-12/
Remember you will need to RELOCK the bootloader if I am not mistaken it is possible to hard brick if you don't!
Then copy to external SD card, name the file PH98IMG.zip (beware of the Windows "double zip" issue), verify MD5 on the SDcard, then reboot into hboot and go. Do it twice!!! Let it boot up and sit for about 10 minutes to calm down, then remove the PH98IMG.zip file from the SD card. Everything should be smooth sailing from there...
You should then be S-ON, completely stock. You will need to unlock again to do anything more
acejavelin said:
Not really sure what you are trying to run, I didn't think there was a 3.14.605.12 executable RUU, but use this page and instructions and grab the file: http://www.androidpolice.com/2012/0...cream-sandwich-ruu-for-final-ota-3-14-605-12/
Remember you will need to RELOCK the bootloader if I am not mistaken it is possible to hard brick if you don't!
Then copy to external SD card, name the file PH98IMG.zip (beware of the Windows "double zip" issue), verify MD5 on the SDcard, then reboot into hboot and go. Do it twice!!! Let it boot up and sit for about 10 minutes to calm down, then remove the PH98IMG.zip file from the SD card. Everything should be smooth sailing from there...
You should then be S-ON, completely stock. You will need to unlock again to do anything more
Click to expand...
Click to collapse
Strange, re-locking the bootloader was all I needed to get the RUU to update in my bootloader. No one else said to do that in any of the instructions, but I did it and immediately it started updating with the PH98IMG that I was originally trying to flash (from here: http://forum.xda-developers.com/showpost.php?p=38527788&postcount=745&nocache=1&z=1965375486761331).
I'm back to stock now, but firmware is 4.03.605.2, not 4.03.605.14. Is that going to be an issue or can I go right ahead with re-unlocking the bootloader and flashing recovery/roms?
BrahManty said:
Strange, re-locking the bootloader was all I needed to get the RUU to update in my bootloader. No one else said to do that in any of the instructions, but I did it and immediately it started updating with the PH98IMG that I was originally trying to flash (from here: http://forum.xda-developers.com/showpost.php?p=38527788&postcount=745&nocache=1&z=1965375486761331).
I'm back to stock now, but firmware is 4.03.605.2, not 4.03.605.14. Is that going to be an issue or can I go right ahead with re-unlocking the bootloader and flashing recovery/roms?
Click to expand...
Click to collapse
Well, I have some good news and bad news...
Bad news is you are now on a leaked firmware and will have to S-OFF to go up or down in versions unless a full RUU is released for the current OTA of 4.5.605.14...
Good news is you are the global leak, and you can use the JuopunutBear S-OFF exploit from http://unlimited.io/index.htm just as if you were on the original ICS release. Also, you can S-OFF and use most ROMs and recoveries as you are now on a global mode firmware.
acejavelin said:
Well, I have some good news and bad news...
Bad news is you are now on a leaked firmware and will have to S-OFF to go up or down in versions unless a full RUU is released for the current OTA of 4.5.605.14...
Good news is you are the global leak, and you can use the JuopunutBear S-OFF exploit from http://unlimited.io/index.htm just as if you were on the original ICS release. Also, you can S-OFF and use most ROMs and recoveries as you are now on a global mode firmware.
Click to expand...
Click to collapse
Lol, all right, I would have tried to get the right firmware on there but my phone got so buggy that it wouldn't even boot into the rom anymore. So I couldn't get it on the SD card and I had to make do with what I had on there. At this point, I'm just glad the phone is usable again and I might leave it stock for a while. Thank you so much for all your help, I couldn't have figured this out without you!
BrahManty said:
Lol, all right, I would have tried to get the right firmware on there but my phone got so buggy that it wouldn't even boot into the rom anymore. So I couldn't get it on the SD card and I had to make do with what I had on there. At this point, I'm just glad the phone is usable again and I might leave it stock for a while. Thank you so much for all your help, I couldn't have figured this out without you!
Click to expand...
Click to collapse
Cool, glad you got it working.
That firmware is actually pretty decent and rock solid stable, you shouldn't have any more software related issues... Plus you can root/ROM like normal from that version, the radios may be slightler lower than most recommended versions, but they should work fine. If you do decide to go the ROM route again, I would suggest going S-OFF before starting, it will just make it easier in the long run.
Hey, just wanted to ask some questions as a follow-up since this seems to be the most relevant (and active) thread to my issue:
Long story short, got a new (to me) Rezound. It was running CM10, from the forthnightly thread. New SIM card from Verizon and I was getting data, but the no mobile network found error. After reading the threads I could find on the error, went with the suggestion of a wipe and so I did. A few too many beers while reading thru the forums, and I did the wipe a bit too thoroughly. Now I have a no OS found, and instead of thinking I know what I'm doing I'd like to ask to make sure I understand this correctly.
Currently, the phone is S-OFF, with TWRP 2.5.0.0. It's saying I'm not rooted, but then again no OS to be rooted. The dump from my bootloader is as follows:
*** TAMPERED ***
*** LOCKED ***
VIGOR PVT SHIP S-OFF RL
HBOOT-2.28.0000
RADIO-2.23.10.0123r/2.23.10.0124r
OpenDSP-v14.6.0.7708.00.0507
eMMC-boot
Sep 20 2012, 17:40:22
Click to expand...
Click to collapse
After checking this thread and this one here it looks like the following applies:
* I can just run the regular RUU (executable) to load a stock image without having to revert back to S-ON first.
* I will have to re-unlock the bootloader thru htcdev after RUUing
* I'll need to reinstall TWRP
Is this right? Am I missing anything?
JoeKamel said:
Hey, just wanted to ask some questions as a follow-up since this seems to be the most relevant (and active) thread to my issue:
Long story short, got a new (to me) Rezound. It was running CM10, from the forthnightly thread. New SIM card from Verizon and I was getting data, but the no mobile network found error. After reading the threads I could find on the error, went with the suggestion of a wipe and so I did. A few too many beers while reading thru the forums, and I did the wipe a bit too thoroughly. Now I have a no OS found, and instead of thinking I know what I'm doing I'd like to ask to make sure I understand this correctly.
Currently, the phone is S-OFF, with TWRP 2.5.0.0. It's saying I'm not rooted, but then again no OS to be rooted. The dump from my bootloader is as follows:
After checking this thread and this one here it looks like the following applies:
* I can just run the regular RUU (executable) to load a stock image without having to revert back to S-ON first.
* I will have to re-unlock the bootloader thru htcdev after RUUing
* I'll need to reinstall TWRP
Is this right? Am I missing anything?
Click to expand...
Click to collapse
You should be able to just boot into twrp and flash a rom
Sent from my ADR6425LVW using xda premium
izzaeroth said:
You should be able to just boot into twrp and flash a rom
Click to expand...
Click to collapse
Okay, that's good to know. For now though, if I just wanted to get my phone working, make sure there's not a SIM issue and such I could go back to a stock image without worrying? I just would rather do a lot more reading and make sure I understand what I'm doing before I try to put a rom on and screw things up further.
JoeKamel said:
Okay, that's good to know. For now though, if I just wanted to get my phone working, make sure there's not a SIM issue and such I could go back to a stock image without worrying? I just would rather do a lot more reading and make sure I understand what I'm doing before I try to put a rom on and screw things up further.
Click to expand...
Click to collapse
No doubt its good to be cautious when you are s-off. If you are just wanting plain jane stock then you could just flash a ruu from boot loader.
Sent from my ADR6425LVW using xda premium
izzaeroth said:
No doubt its good to be cautious when you are s-off. If you are just wanting plain jane stock then you could just flash a ruu from boot loader.
Click to expand...
Click to collapse
Okay, so if I go with the image here: http://forum.xda-developers.com/showpost.php?p=38527788&postcount=745&nocache=1&z=1965375486761331
Would I still need to relock the bootloader since I'm S-OFF or can I just flash that from TWRP and go from there?
JoeKamel said:
Okay, so if I go with the image here: http://forum.xda-developers.com/showpost.php?p=38527788&postcount=745&nocache=1&z=1965375486761331
Would I still need to relock the bootloader since I'm S-OFF or can I just flash that from TWRP and go from there?
Click to expand...
Click to collapse
Honestly I don't remember if you would have to relock to flash that in boot loader sine you are s-off, but I do know it won't flash from recovery
Sent from my ADR6425LVW using xda premium
izzaeroth said:
Honestly I don't remember if you would have to relock to flash that in boot loader sine you are s-off, but I do know it won't flash from recovery
Click to expand...
Click to collapse
Recovery as in HBoot or TWRP? Because I still have TWRP. I can get the windows executable RUU for ICS if need be.
JoeKamel said:
Recovery as in HBoot or TWRP? Because I still have TWRP. I can get the windows executable RUU for ICS if need be.
Click to expand...
Click to collapse
Recovery = twrp
Sent from my ADR6425LVW using xda premium
izzaeroth said:
Honestly I don't remember if you would have to relock to flash that in boot loader sine you are s-off, but I do know it won't flash from recovery
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
S-off is S-off... installing a RUU wont change that, it may set you back to 'Locked", but you are S-off so it doesn't matter, you can stay locked&s-off and its no different than unlocked/S-off.
If you are going back to stock and are S-off I would use the Global Mode Leak (4.3.605.2) available on AndroidPolice and flash in Hboot... rename file to PH98IMG.zip and place in root of SD card (how it gets there is a irrelevant) then reboot into Hboot, confirm and wait.
Sent from my HTC Aria (Liberty) running CM 7.2 using xda app-developers app
So while in process of s-off once I got to the part when you "fastboot oem rebootRUU" that went through. But right after trying to flash a zip im stuck looking at the blk HTC screen. I was given a "<Failed <remote: 99 unknown fail>". Now its just stuck.
I've been trying to figure out what happened but just have no where else to turn. Please lend a hand.
I think I already know the answer to this question, but what version is your firmware? Just for your knowledge, there hasn't been an RUU since ICS, or maybe the first release of JB. So, odds are, you flashed the wrong RUU.
But good news, you *might* not be bricked. Have you tried rebooting? This really your only option, anyway. Try to get into the bootloader. Flash a new recovery if the RUU has already wiped it, and flash a compatible rom.
Please also list your bootloader info.
_______________________________________
Phone: HTC EVO 4G LTE
Sense 5, S-Off
Tablet: ASUS Nexus 7.2
Rooted, Custom Rom & Kernel
aarsyl said:
I think I already know the answer to this question, but what version is your firmware? Just for your knowledge, there hasn't been an RUU since ICS, or maybe the first release of JB. So, odds are, you flashed the wrong RUU.
But good news, you *might* not be bricked. Have you tried rebooting? This really your only option, anyway. Try to get into the bootloader. Flash a new recovery if the RUU has already wiped it, and flash a compatible rom.
Please also list your bootloader info.
_______________________________________
Phone: HTC EVO 4G LTE
Sense 5, S-Off
Tablet: ASUS Nexus 7.2
Rooted, Custom Rom & Kernel
Click to expand...
Click to collapse
It's not a full RUU in the normal sense. It's the one for Facepalm.
To the OP, did you gain SuperCID prior to running those commands? If not, then the process will fail. You should simply be able to hold the power button down & reboot your phone. Also, as stated above, list your device info so we can make sure you're using the right S-off exploit.
Sent from my HTC EVO 4G LTE
So I did get the phone into the bootloader. I was trying to do the rumrunner s-off but being I was so damn tired lastnight I ended up forgetting a step. I am currently unlocked and rooted. I also somehow deleted my backup like a idiot and wiped the os. So I'm stuck from this point where I need to go.
So where we stand as of now:
bootloader unlocked
rooted
twrp 2.6.3.0
firmware 3.17.651.4
hboot 2.09
radio 1.13.11.0830
z3r0t0l0rEnCe said:
So I did get the phone into the bootloader. I was trying to do the rumrunner s-off but being I was so damn tired lastnight I ended up forgetting a step. I am currently unlocked and rooted. I also somehow deleted my backup like a idiot and wiped the os. So I'm stuck from this point where I need to go.
So where we stand as of now:
bootloader unlocked
rooted
twrp 2.6.3.0
firmware 3.17.651.4
hboot 2.09
radio 1.13.11.0830
Click to expand...
Click to collapse
Happens to all of us. Don't worry about wiping the OS. Look for Captain Throwback's stock rooted rom, and flash a custom kernel along with it, like the Dirty MAC kernel or Arc reactor. Doesn't matter which one...rumrunner just needs a custom kernel.
Captain Throwback's stock 3.17 base
http://forum.xda-developers.com/showthread.php?t=2468418
Dirty MAC kernel
http://forum.xda-developers.com/showthread.php?t=2178307
Arc Reactor
http://forum.xda-developers.com/showthread.php?t=1873824
After you flash these, then reboot into Android, set your phone to stay awake during charge Settings-->Display and Buttons, and also set SuperSU to automatically grant root access (open the app, swipe right twice, and scroll down a little). This way, you don't have to touch your phone. If you touch it, the process will fail....even to unlock the phone to grant root access. And of course, turn on USB debugging in Developer Options.
After you do all of these, then run the exploit.
aarsyl said:
Happens to all of us. Don't worry about wiping the OS. Look for Captain Throwback's stock rooted rom, and flash a custom kernel along with it, like the Dirty MAC kernel or Arc reactor. Doesn't matter which one...rumrunner just needs a custom kernel.
Captain Throwback's stock 3.17 base
http://forum.xda-developers.com/showthread.php?t=2468418
Dirty MAC kernel
http://forum.xda-developers.com/showthread.php?t=2178307
Arc Reactor
http://forum.xda-developers.com/showthread.php?t=1873824
After you flash these, then reboot into Android, set your phone to stay awake during charge Settings-->Display and Buttons, and also set SuperSU to automatically grant root access (open the app, swipe right twice, and scroll down a little). This way, you don't have to touch your phone. If you touch it, the process will fail....even to unlock the phone to grant root access. And of course, turn on USB debugging in Developer Options.
After you do all of these, then run the exploit.
Click to expand...
Click to collapse
This is odd to me, because I ran rumrunner at least 3 times using just my stock ROM (no custom kernel or anything), and it worked fine every time. I guess the new version of rumrunner added some limitations to make it more generic.
whats bothering me is that even after i check the MD5, it keeps failing to install capt zip. think maybe i can just use adb to push the zip file? just not sure how to word the command right to get it to load
z3r0t0l0rEnCe said:
whats bothering me is that even after i check the MD5, it keeps failing to install capt zip. think maybe i can just use adb to push the zip file? just not sure how to word the command right to get it to load
Click to expand...
Click to collapse
No, don't. If it fails, don't force it. Reflash TWRP 2.6.3 (not the kit kat version), and try to flash again.
@Captain_Throwback: Yes, I didn't remember needing a custom kernel when I used Dirty Racun, but rumrunner needs it now. Keep in mind that rumrunner isn't for this device exclusively. Maybe that's the purpose of the custom kernel.
i'd wager you're trying to flash files that aren't recovery flashable, then lying to the people who are trying to help you.
i got it running again using capt stock rooted rom. attempting rumrunners s-off again now that i got this part working.
Are you using a custom kernel?
_______________________________________
Phone: HTC EVO 4G LTE
Sense 5, S-Off
Tablet: ASUS Nexus 7.2
Rooted, Custom Rom & Kernel
now s-off and updated rumrunners hboot. now onto flashing roms finally.
Thank you all that helped me with my stupidness and not reading directions.
Last post. I can't say it enough that you must read read read when it comes to directions. If I would of followed directions as directed I would of never ran into the issues I did. It was a learning experience.
One thing for sure that I took from this experience is adb and directions. I've learned a lot in the last 24hrs alone.
I'd like to thank Capain_throwback and everyone in the irc for the help and you all here that assisted me.
Sent from my EVO using XDA Premium 4 mobile app