I've tried a lot of the available ROMs (including the new JB ones), but this combination is just awesome:
Firmware MediaPad ICS 4.0.3 HWMOD C232B005
[KERNEL][AOSP][ICS 4.0.3][09/12/12] Mediapad EX (Don't flash modules)
New Qualcomm JellyBean Driver / Libraries
lagfree Governor
Overclock to 1,67 GHz
I'm pretty sure that the new Qualcomm Drivers tip the scales. Overall this combination gives you a fully working and outstanding smooth mediapad.
Have fun and press the thanks button if this helped you.
h25p said:
I've tried a lot of the available ROMs (including the new JB ones), but this combination is just awesome:
Firmware MediaPad ICS 4.0.3 HWMOD C232B005
[KERNEL][AOSP][ICS 4.0.3][09/12/12] Mediapad EX (Don't flash modules)
New Qualcomm JellyBean Driver / Libraries
lagfree Governor
Overclock to 1,67 GHz
I'm pretty sure that the new Qualcomm Drivers tip the scales. Overall this combination gives you a fully working and outstanding smooth mediapad.
Have fun and press the thanks button if this helped you.
Click to expand...
Click to collapse
Amazing testing, I am now on after_silence's CM10. Would the JB drivers with the same adb commands work with his CM10? Only thing not really working is the wifi MAC thing on that rom.
I'm pretty sure that the cm10 Rom already contains the new drivers. I believe I've read that flashing these files won't work with cm based Roms (maybe look at thread where the driver download is located).
Gesendet von meinem LT18i mit Tapatalk 2
Normally I have no problem with ADB, but for some reason I am unable to push the system files for the JB Adreno Drivers. I've attached a screenshot of my command window, but basically it's saying the file doesn't exist or I don't have permissions. I tried moving the file to a drive that wasn't hosting my Win8 OS, and ran the command with the new local file location but I got the same error.
I also tried to use Root Explorer and ES File Explorer to simply copy the files, but Root Explorer causes a hot reboot, and ES FIle Explorer freezes the tablet completely.
I've rooted a ton of devices in my day including that P.O.S. Notion Ink Adam, but this Huawei tablet is turning out to be a whole different beast in and of itself.
Any ideas on what to do now?
EDIT/UPDATE: took out the " / " after local system folder in adb command and all is golden.
I highly advice against flashing the Jellybean Adreno libraries on a ICS flavored ROM!
I've tried it and now the screen remains black. ADB works fine still though, so I can restore things to the way they were.
Still... stay away from mixing Jellybean flavored stuff into ICS!
MrColdbird said:
I highly advice against flashing the Jellybean Adreno libraries on a ICS flavored ROM!
I've tried it and now the screen remains black. ADB works fine still though, so I can restore things to the way they were.
Still... stay away from mixing Jellybean flavored stuff into ICS!
Click to expand...
Click to collapse
Do you have flashed exactly the files contained in the linked zip using adb push? Don't push the complete set from the qualcomm site.
MrColdbird said:
I highly advice against flashing the Jellybean Adreno libraries on a ICS flavored ROM!
I've tried it and now the screen remains black. ADB works fine still though, so I can restore things to the way they were.
Still... stay away from mixing Jellybean flavored stuff into ICS!
Click to expand...
Click to collapse
No problems here. I'm getting butter smooth interactions, and a whopping 3062 in Quadrant. Also the lag over HDMI has gone away for me. I can now play games on my television with my sixaxis!
isolated_epidemic said:
No problems here. I'm getting butter smooth interactions, and a whopping 3062 in Quadrant. Also the lag over HDMI has gone away for me. I can now play games on my television with my sixaxis!
Click to expand...
Click to collapse
Which ROM are you using?
I'm using CM10 ,I flashed whole of them then reboot,after that it couldn't display anythings,so I must restored system back.
chok_thewa said:
Which ROM are you using?
I'm using CM10 ,I flashed whole of them then reboot,after that it couldn't display anythings,so I must restored system back.
Click to expand...
Click to collapse
h25p did say that very likely CM10 would already have the JB fixes, so perhaps the adb pushed driver is borking the one in CM10? If you are successful again I will try.
h25p said:
Do you have flashed exactly the files contained in the linked zip using adb push? Don't push the complete set from the qualcomm site.
Click to expand...
Click to collapse
Can i just flash this zip file directly from twrp? Currently im on HWMOD b005 rom with latest Bart kernel (r08) now. Thanks
Sent from my HUAWEI MediaPad using Tapatalk 2
joy_van_hallen said:
Can i just flash this zip file directly from twrp? Currently im on HWMOD b005 rom with latest Bart kernel (r08) now. Thanks
Click to expand...
Click to collapse
It didn't work for me, but you can try.
athanaso77 said:
It didn't work for me, but you can try.
Click to expand...
Click to collapse
is it possible to just copy the system folder using root explorer and change the permission?
Sent from my HUAWEI MediaPad using Tapatalk 2
zelduy said:
is it possible to just copy the system folder using root explorer and change the permission?
Sent from my HUAWEI MediaPad using Tapatalk 2
Click to expand...
Click to collapse
When I tried to do that with Root Explorer, it froze my tablet completely. And ES File Explorer (with root activated) caused my tablet to hot reboot every time I tried. ADB is going to be your only route I believe.
isolated_epidemic said:
ADB is going to be your only route I believe.
Click to expand...
Click to collapse
That's correct.
Ok.. but I'm quiet new in this adb thingie.. do I need driver for this? cause when I type adb devices / adb remount it said no devices found..
and yes.. I'm already in debug mode...
thanks
zelduy said:
Ok.. but I'm quiet new in this adb thingie.. do I need driver for this? cause when I type adb devices / adb remount it said no devices found..
and yes.. I'm already in debug mode...
thanks
Click to expand...
Click to collapse
Install HiSuite for the proper ADB drivers. It's one of the programs on the "Disc" drive that mounts when you plug the tablet into the computer.
the combination is awesome
but after i use this combination, I have no front camera. The problem is that image need it for Skype video chat.
can somebody tell me what's wrong?
thank you
you need to push the EX's modules
Sent from my HUAWEI MediaPad using Tapatalk 2
danisukses said:
you need to push the EX's modules
Sent from my HUAWEI MediaPad using Tapatalk 2
Click to expand...
Click to collapse
so for bootR08 we need the modules?
---------- Post added at 06:10 PM ---------- Previous post was at 05:33 PM ----------
Just flashed. will test out the combi. thanks
Related
Hello,
This is the my port of the Wildfire 2.1 Eclair Rom for the Mini Pro.
I chose Eclair because the drivers will probably be easier to find like this, you can expect a 2.2 Sense rom to come once the 2.2 AOSP is done.
Project discontinued due to GSM incompatibilities.
[Download v0.2a Here]
[Download v0.2b Update]
The Work's
Apps2SD
ADB
Booting
Display
xRecovery
Touch
SD-Card
OpenGL
Ext4 for Apps2SD
OMX (proper video playback)
Sound
The Won't 's
Charging [It says it's charging but it's not!]
GSM/3G
WiFi
Keyboard layout
USB mounting
Vibration
Sensors
Bluetooth
LED Flash & Light
Camera
YouTube Video showing installation.
YouTube Video in high quality by maxaan
Developer Notes:
Developer Notes:
I ask developers for help to try out finding how to get the drivers for the non-working hardware parts to work. Simply said, you need to copy drivers from the SE 2.1 build to this build and report if it worked and which files were used.
Changelog:
Changelog:
Project on hold until progress on CM port and until I have more users supporting me, not in the form of donations but actual work.
v0.2b is confirmed to work. It fixes sound, video playback and the dialer lags less now, thanks nefan
v0.2a is up! Prepared the system for future drivers, little faster, ext4 support for apps2sd
v0.2 Alpha is up! Fixed a lot: SD, Touchscreen, xRecovery, OpenGL
v0.1 Technical Preview / Pre-Alpha released for developers.
Hey, where do i download the x10 mini drivers??
jmms94 said:
Hey, where do i download the x10 mini drivers??
Click to expand...
Click to collapse
I have provided an link in post 2. But this is really dev only, please don't try if you don't know what you're doing, since you WILL screw up your phone otherwise.
edit
good work
when you are done with the 2.2 aosp couldnt you just upload the ported sense.apk in that thread so you can install it via root explorer or xrecovery or something?
maxaan said:
when you are done with the 2.2 aosp couldnt you just upload the ported sense.apk in that thread so you can install it via root explorer or xrecovery or something?
Click to expand...
Click to collapse
Nope, sense is integrated deep into the system. It isn't just an apk, it's an entire framework and uses more than just one application (music player, contacts, image viewer, web browser, etc.)
Mikevhl said:
Nope, sense is integrated deep into the system. It isn't just an apk, it's an entire framework and uses more than just one application (music player, contacts, image viewer, web browser, etc.)
Click to expand...
Click to collapse
oowkay.. i understand
i think this is the drivers for the touch: i cant upload it right now but if u can find them by yourself in the stock that would be good
/sys/bus/serio/
/system/etc/ts_fw_update.sh
/system/etc/firmware/cy8_truetouch_jtouch.hex
/system/etc/firmware/cy8_truetouch_tpk.hex
i read on another thread that it was those.
maxaan said:
i think this is the drivers for the touch: i cant upload it right now but if u can find them by yourself in the stock that would be good
/sys/bus/serio/
/system/etc/ts_fw_update.sh
/system/etc/firmware/cy8_truetouch_jtouch.hex
/system/etc/firmware/cy8_truetouch_tpk.hex
i read on another thread that it was those.
Click to expand...
Click to collapse
Aaargh I can't pull sys/bus/serio
Thanks for the tip though!
Mikevhl said:
Aaargh I can't pull sys/bus/serio
Thanks for the tip though!
Click to expand...
Click to collapse
Im just glad to help
I will se if i can find the other drivers
Mikevhl said:
Aaargh I can't pull sys/bus/serio
Thanks for the tip though!
Click to expand...
Click to collapse
sys/bus/serio is a folder.
maxaan said:
sys/bus/serio is a folder.
Click to expand...
Click to collapse
This things is in the folder
sys/bus/serio/devices/serio0
sys/bus/serio/drivers/cy8ctma300_ser/bind
sys/bus/serio/drivers/cy8ctma300_ser/bind_mode
sys/bus/serio/drivers/cy8ctma300_ser/description
sys/bus/serio/drivers/cy8ctma300_ser/serio0
sys/bus/serio/drivers/cy8ctma300_ser/uevent
sys/bus/serio/drivers/cy8ctma300_ser/unbind
sys/bus/serio/drivers_autoprobe
sys/bus/serio/drivers_probe
sys/bus/serio/uevent
As i said before i will try to find drivers for more things later. Im at school right now so i look for that when i come home.
maxaan said:
sys/bus/serio is a folder.
Click to expand...
Click to collapse
Yes I understood that, but sys/bus/serio/devices/serio0 is as well, and MANY files refuse to be pulled, even when mounted rw and pulling through recovery (uses root permissions)
Mikevhl said:
Yes I understood that, but sys/bus/serio/devices/serio0 is as well, and MANY files refuse to be pulled, even when mounted rw and pulling through recovery (uses root permissions)
Click to expand...
Click to collapse
Try with only
system/etc/firmware/cy8_truetouch_jtouch.hex
system/etc/firmware/cy8_truetouch_tpk.hex
or whole firmware folder?
Mikevhl said:
Yes I understood that, but sys/bus/serio/devices/serio0 is as well, and MANY files refuse to be pulled, even when mounted rw and pulling through recovery (uses root permissions)
Click to expand...
Click to collapse
Try to "cat old-file new-file"
and then pull the new-file.
maxaan said:
Try with only
system/etc/firmware/cy8_truetouch_jtouch.hex
system/etc/firmware/cy8_truetouch_tpk.hex
or whole firmware folder?
Click to expand...
Click to collapse
not working
EGL folder didn't fix it either.
is /sys/ formatted too when formatting /system ?
If not serio won't fix it. I've included references in init.buzz.rc but still no good
/sys files are part of the kernel - you won't be able to pull or modify them.
Ah crap, sony decided to use another touchscreen in the Pro, that's why touch is working on the mini but not on the pro
Hi there,
As I am developing my first apps for Android, I've run into an issue that bothers me. When trying to logcat (via terminal or Eclipse), this is the output I get:
Unable to open log device '/dev/log/main': No such file or directory
Click to expand...
Click to collapse
I've googled, but found solution only for Huawei devices (getting into service menu and activating logging) but it doesn't work with my P500. Everything (deploying , debugging) works just fine. BTW I am using NightlyFourE V4.1 ROM (that's Cyanogenmod 2.3.7) and linux workstation. Any help appreciated!
Sent from my LG-P500 using Tapatalk
Look for a tweak the same as that on the /system/etc/init.d folder
rm -r dev/log/main
or something similar to that and delete it..
Sent from my LG-P500 using Tapatalk
Coffei said:
Hi there,
As I am developing my first apps for Android, I've run into an issue that bothers me. When trying to logcat (via terminal or Eclipse), this is the output I get:
I've googled, but found solution only for Huawei devices (getting into service menu and activating logging) but it doesn't work with my P500. Everything (deploying , debugging) works just fine. BTW I am using NightlyFourE V4.1 ROM (that's Cyanogenmod 2.3.7) and linux workstation. Any help appreciated!
Click to expand...
Click to collapse
next you should use stock roms for testing and developing applications not modded ones
dnle71 said:
Look for a tweak the same as that on the /system/etc/init.d folder
rm -r dev/log/main
or something similar to that and delete it..
Click to expand...
Click to collapse
Thanks a bunch man! Worked like a charm..
trettet said:
next you should use stock roms for testing and developing applications not modded ones
Click to expand...
Click to collapse
I guess I should, but as long as it's my daily-driver I think I will prefer custom ROMs (i'm definitely not full-time developer, just a fan)..
Yes, we just got our own forums and YES it seems a bit pointless to be offering this up right away.
However, I've been reading up on ROM kitchens, etc, and I am *very* eager and excited to start playing with the newest ICS build for the Mediapad.
If anyone starts working on any CWM-9 based ROM, I would more than gladly be an active tester. My tablet currently acts as a daily Pandora-listening device, so I am more than willing to test nightly/bi-nightly/4x per day builds, whatever you request.
My tablet is at your command. Heck, if you need to remote into my PC to access the tablet, I can set up a dedicated computer connected to the Springboard, just for you.
Otherwise, I am also very much willing to temporarily donate/lend my device to a credible dev who would like to work on this.
great idea to start a thread like this..
i'm also willing to do alpha/beta testing of some new custom ROMs for our lovely MediaPad
Adreno 2xx drivers for ICS now available!!!
https://developer.qualcomm.com/deve...phics-optimization-adreno/tools-and-resources
zombolo said:
Adreno 2xx drivers for ICS now available!!!
https://developer.qualcomm.com/deve...phics-optimization-adreno/tools-and-resources
Click to expand...
Click to collapse
I have installed them on my huawei phone,-not noticed much difference.
patch
manual install
maybe try it on the pad? remember to edit build prop and set composition type to gpu.
mangoman said:
I have installed them on my huawei phone,-not noticed much difference.
patch
manual install
maybe try it on the pad? remember to edit build prop and set composition type to gpu.
Click to expand...
Click to collapse
Wouldn't the ICS build we're running already have this driver?
I'm working on a CM9 port now but it'll be my first ROM ever so it's slow going haha. It will happen though.
i think they're already on the MediaPad, but we can try this...
anybody can post a short list of steps, how to install it on the MediaPad?
or is it just as simple as extracting the zip to /system folder and modifying the build.prop?
i've checked the files on mediapad already:
- /system/etc/firmware -> has the "leia" and "yamato" files, but doesn't have the "a255" and "a300" files...
- /system/lib -> this folder doesn't exist at all
hiko36 said:
I'm working on a CM9 port now but it'll be my first ROM ever so it's slow going haha. It will happen though.
Click to expand...
Click to collapse
that's excellent news hiko36
let us know if you need testing, or anything we can provide you with, to help you on this journey
Klacik said:
i think they're already on the MediaPad, but we can try this...
anybody can post a short list of steps, how to install it on the MediaPad?
or is it just as simple as extracting the zip to /system folder and modifying the build.prop?
i've checked the files on mediapad already:
- /system/etc/firmware -> has the "leia" and "yamato" files, but doesn't have the "a255" and "a300" files...
- /system/lib -> this folder doesn't exist at all
that's excellent news hiko36
let us know if you need testing, or anything we can provide you with, to help you on this journey
Click to expand...
Click to collapse
Yes, they are already there and they are more performance oriented than the genaral drivers (NenaMark2: 33.2 fps for the general driver vs. 37.9 for the one already there). Tried it by adb pushing the new driver files to the mediapad.
€: /system/lib did not exist on your device? What firmware do you use?
mblaster said:
Yes, they are already there and they are more performance oriented than the genaral drivers (NenaMark2: 33.2 fps for the general driver vs. 37.9 for the one already there). Tried it by adb pushing the new driver files to the mediapad.
€: /system/lib did not exist on your device? What firmware do you use?
Click to expand...
Click to collapse
thanks for the information.. i'm not going to try it then
i'm using the ics b010, but the /system/lib exists.. i must've been blind or something.. maybe i've looked ih /system/etc... sorry, my bad
WANTED: Users to port SGS roms to the 4.0. You will need to know how to complete a full restore if something goes wrong, but that's it. I cannot go through the forums searching for good SGS roms, as I have several threads to manage, and a rom to work on. The steps are easy for you though, and if you port a rom I will add it in the OP.
First of all, I want to say that I take NO credit on any of these roms. All I did was port them over and add speed tweaks, or added ones that users have ported. If the rom creators or mods have any issue whatsoever with this thread, I will happily take it down, even though I think it would be a large contribution to the 4.0 community. I will continue to update this forum with info as I go along.
I, after a fortunate afternoon of boredom, have managed to successfully begin porting I9000 roms to our devices! Fortunately, they are similar enough that it boots without any modifications. I will put up here any ports that I make, and any that the users create. Note that these WILL NOT BE UPDATED! These are one-time ports, to be used and improved upon by the community. Anything that is broken now will stay broken, unless a user decides to fix/update it, then I will include it in the OP.
What *should* work in all ported roms:
wifi
GPS
home buttons
everything else
What will probably *not* work on ported roms:
Bluetooth
Camera
backlight on buttons
Ported roms:
~GamerzRom odexed V11-~
Link to original thread: http://forum.xda-developers.com/showthread.php?t=1656081
Added:
V6 supercharger, and build.prop tweaks from it.
init.d tweaks from my rom
ext4 filesystem
Advanced mount options
Auto zipalign and Database optimize
Removed apps that do not work on our Player (such as the Dialer)
Download:http://www.mediafire.com/download.php?ctuu2w295w2xlk6
~Saurom~
Original thread:http://forum.xda-developers.com/showthread.php?t=1388342
Ported download link:http://www.mediafire.com/download.php?csua40hkg1r3m86
~JellyBeanRom~
Original thread: http://forum.xda-developers.com/showthread.php?t=1260709&highlight=gb
Ported download link:http://www.mediafire.com/download.php?mgec81f3ifck221
~Ario Rom (ported by ChaosChris)~
Ported thread link : http://forum.xda-developers.com/showthread.php?p=29950015#post29950015
Original thread: http://forum.xda-developers.com/showthread.php?t=1536558
To use these Roms:
You MUST use a Gplayer kernel! GT-I9000 kernels will not boot!
A full wipe may be necessary with some roms if you encounter issues.
Converting (for porters)
Steps:
1. Download wanted rom (must be GB)
2.Move the zip to the internal sdcard
3.Reboot into recovery
4.Flash zip, then boot into download mode
5.Flash a SGP kernel
6. apply my mod pack to the rom, by either copying/pasting the system directory over the SGS rom's system directory, or by pushing it via adb, (eg. adb push /path/to/modpack /system).
7. Profit!
NOTE: after applying this, porters may want to remove non-working packages such as the dialer and mms, as they may cause issues with the end result if they are kept in. Do not delete phone.apk though!! This is required for the camera and some other things, and breaks stuff on certain roms. You have been warned.
NOTE: If you use this modpack, please give me credit, and link back to this thread so that more people can use it. Also, you should probably link back to the ported rom's thread as well, to avoid "ripping off" those devs.
Modpack:
Changelog
V1-
Preliminary release
Fixes wifi and GPS
Includes v6 supercharger and init.d tweaks
V2-
fixed vold.fstab so sdcard is mounted properly.
Download:
ModpackV1:
http://www.mediafire.com/download.php?diaq6im4i18ktf7
NOTE:Note that this is preliminary. It fixes everything listed, and attempts to fix some broken things. Your mileage may vary. This is not a cwm flashable zip! you much extract and adb push this over the existing system directory. This is mainly intended for porters, so users apply at your own risk. This will work, but is a very early release.
Modpack V2 (thanks to ChaosChris):
https://docs.google.com/open?id=0B9OVlH2Pl76DZk5Pa3lJVXlrYzA
Looking good! Does the gamerz port have the 388mb of ram, I thought that was kernal related?
Sent using Tapatalk
iJimaniac said:
Looking good! Does the gamerz port have the 388mb of ram, I thought that was kernal related?
Sent using Tapatalk
Click to expand...
Click to collapse
Yeah, it says that because it includes semaphore's kernel, which raises the max rom to 380, which we could do on our kernel's, but apparently that breaks a lot of stuff if you go much further then 350 (according to klin).
is the wifi fixed in your port or do we have to do your fix after flashing?
Just a word of advice, make sure you get permission from the devs! Also surely this will work with ICS roms right? Just swap out the SGS kernel with the SGP CM7 kernel and it should work (I think)
Sent by my Robot Butler
Supermaster34 said:
Just a word of advice, make sure you get permission from the devs! Also surely this will work with ICS roms right? Just swap out the SGS kernel with the SGP CM7 kernel and it should work (I think)
Sent by my Robot Butler
Click to expand...
Click to collapse
check over in the operation: ics for the 4.0 thread I believe they are already attemping to use the cm7 kernel to boot a cm9.
daniel644 said:
is the wifi fixed in your port or do we have to do your fix after flashing?
Click to expand...
Click to collapse
Yeah, it is fixed before you flash. Once I manage to iron out a few more bugs, I will probably release a "conversion pack" that fixes all the issues. I already have one that fixes wifi and gps, but bluetooth and camera have me stumped, and I do not want to replace the entire hw/lib folder, because some of these roms have lib optimizations, but I may have to.
Sent from my GT-I9000 using xda app-developers app
Supermaster34 said:
Just a word of advice, make sure you get permission from the devs! Also surely this will work with ICS roms right? Just swap out the SGS kernel with the SGP CM7 kernel and it should work (I think)
Sent by my Robot Butler
Click to expand...
Click to collapse
Since I am merely redistributing their work, not incorporaring it into anything I have made, or taking any credit for it, I don't asking permission is necessary. I may be completely off base, but I think that as long as you give devs 100% credit, and link to their original work, it is okay. It may not be the best option, but neither is asking EVERY dev if I can port their rom, or ask permission for user-ported roms.
Youay have an idea there, althouh I think that zaclimon has tried it, and he said it wouldn't boot. I have 2 efs backups, so I guess I can try, although even if the kernel boots, I bet I will have to do a LOT more work before it is usable. I also believe that he said the issues may have been rom based, so here it goes, and wish me luck.
Sent from my GT-I9000 using xda app-developers app
hanthesolo said:
Since I am merely redistributing their work, not incorporaring it into anything I have made, or taking any credit for it, I don't asking permission is necessary. I may be completely off base, but I think that as long as you give devs 100% credit, and link to their original work, it is okay. It may not be the best option, but neither is asking EVERY dev if I can port their rom, or ask permission for user-ported roms.
Youay have an idea there, althouh I think that daniel has tried it, abd he said it wouldn't boot. I have 2 efs backups, so I guess I can try, although even if the kernel boots, I bet I will have to do a LOT more work before it is usable.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
I've already tried with a cm7 kernel and I got an error of looping (netd1.0 starting) that's why I'm trying to do something. Now I need to backport 3.0.8 usb gadget drivers.
zaclimon said:
I've already tried with a cm7 kernel and I got an error of looping (netd1.0 starting) that's why I'm trying to do something. Now I need to backport 3.0.8 usb gadget drivers.
Click to expand...
Click to collapse
Whoops, I meant you . I will try with a official cm9 build from the SGS forums, and see if that fares any better. Probably will not, but it doesn't hurt to try.
EDIT: well, nevermind about that. He seems to have pulled all of his download links, and I cannot get to the CM7 build. Oh well...
I am going to try anyway with the I9000 package since it seems to have EXT4 support, and I *think* that was what was bootlooping me earlier. This as all just my hopeful rationalization, of course . A lot farther out there, but maybe I can use a SGP5.0 kernel to get it booting. A LOT less likely, but hey, i'm experimenting .
EDIT: I cannot try ICS, since I need to reboot into recovery a second time, and I cannot do that, as I have the intl bootloader on my US device, and it would require it to be booting first.
hanthesolo said:
Whoops, I meant you . I will try with a official cm9 build from the SGS forums, and see if that fares any better. Probably will not, but it doesn't hurt to try.
EDIT: well, nevermind about that. He seems to have pulled all of his download links, and I cannot get to the CM7 build. Oh well...
I am going to try anyway with the I9000 package since it seems to have EXT4 support, and I *think* that was what was bootlooping me earlier. This as all just my hopeful rationalization, of course .
Click to expand...
Click to collapse
I think we should do like entrophy's because I get bored from mtd. Also just tried the gamerz rom port. As I see the camera works, don't know about bluetooth (it can turn on). Vibration works too. I was able to connect to wifi pretty fast and I have one word for this rom. FAST!!!!
Good job!!
zaclimon said:
I think we should do like entrophy's because I get bored from mtd. Also just tried the gamerz rom port. As I see the camera works, don't know about bluetooth (it can turn on). Vibration works too. I was able to connect to wifi pretty fast and I have one word for this rom. FAST!!!!
Good job!!
Click to expand...
Click to collapse
Well, thet camera shows a preview, but fails when a pic is taken, for some reason. Bluetooth does turn on, but is not seen by any other devices, and cannot scan for others either. I did do a little tweaking with Gamerz, so it will be even faster than it was already, which is pretty blazing! I have 2 more that I can put up (I have a preliminary package that I just adb push over the system files that works for now). I have also gotten the camera apk onto my rom, and it works really well! It doesn't take 5 MP pics, or record 720p video (which may be because I am using Terrasilent, which reduces the amount of Vram the system can have), but tap to autofocus and everything else works pretty well. I have a sneaking suspicion that the camera is soft limited, not hard-limited.
I also noted that the external sd card isn't working too (a problem with vold.fstab I'll correct it right now)
zaclimon said:
I also noted that the external sd card isn't working too (a problem with vold.fstab I'll correct it right now)
Click to expand...
Click to collapse
I don't use an externel sdcard, so thanks for pointing that out! I will include a fixed version in my mod pack.
hanthesolo said:
I don't use an externel sdcard, so thanks for pointing that out! I will include a fixed version in my mod pack.
Click to expand...
Click to collapse
Here's the vold.fstab if you need it
Okay, it seems that the zip hosed my partitions (converted them to yaffs2 and mtd), so I am going to perform a full restore, and just keep porting GB roms. As soon as you can get the usb gadget driver working, zaclimon, I guess I can keep working on it, but for now I will just keep to GB.
Two more roms up! I will probably not port any other unless I see an especially good one, but I will put up my mod pack tomorrow.
has anyone found out if the ported roms enable tv out or has someone found out if tv out support is in the i9000 kernal?
TV out has to have hardware, or your not going anywhere. I think the galaxy player lacks the hardware unfortunately. If it does have the hardware, it was very dumb of Samsung not to enable it.
Sent using Tapatalk
iJimaniac said:
TV out has to have hardware, or your not going anywhere. I think the galaxy player lacks the hardware unfortunately. If it does have the hardware, it was very dumb of Samsung not to enable it.
Sent using Tapatalk
Click to expand...
Click to collapse
what hardware does the galaxy s i9000 have that allows for tv out? I thought the galaxy s i9000 and the galaxy player 4.0 had the same gpu?
I would like to root my tablet. Been searchin for a few days on where i can download drivers and software for my tablet to no avail.
Is there anyway i can transfer all files/drivers/apps to pc? so if i root device i have my utilities on pc. Btw running on android 4.0.3
1) Download Huawei MediaPad ROOT ICS Android 4.0.x.rar here: http://turbobit.net/4ji952yn3m8n.html
2) Connect the tablet to your PC, install the driver.
3) In the settings of the tablet enable debugging by USB .
4) Unpack the archive.
5) Run the Install Root.cmd wait three reboots.
Welcome to the Root World!
Thank you.... :laugh:
Is there any way to unroot ?
Sent from my MediaPad 7 Lite using XDA Premium HD app
justynz said:
1) Download Huawei MediaPad ROOT ICS Android 4.0.x.rar here: http://turbobit.net/4ji952yn3m8n.html
2) Connect the tablet to your PC, install the driver.
3) In the settings of the tablet enable debugging by USB .
4) Unpack the archive.
5) Run the Install Root.cmd wait three reboots.
Welcome to the Root World!
Click to expand...
Click to collapse
Used this file and method and it didn't work. It kept saying that adb server is out of date and it could not access the file system (error: read-only file system) IT rebooted 3 times alright but no root for now :crying:
JBolho said:
Used this file and method and it didn't work. It kept saying that adb server is out of date and it could not access the file system (error: read-only file system) IT rebooted 3 times alright but no root for now :crying:
Click to expand...
Click to collapse
Me too...
I would like to install a custom rom, so i can be able to connect a modem 3G ... My media pad lite doesnt support 3G by dongle usb...
Sorry for the bad english... I am portuguese
try this
http://forum.xda-developers.com/showthread.php?t=1886460
I've rooted my mediapad aka springpad with it
maybe it'll work but you gotta try it yourself
btw pls install the HiSuite to make sure the drivers are fully installed on your PC
I updated adb server and it worked but now i have a BIG question:
Why does SetCPU, and other similar apps, report 1ghz as the CPU max speed??? This is supposed to be an A8 single core 1.2Ghz, and it's sold with these reported specs... Is mine faulty? Can anyone confirm?
JBolho said:
I updated adb server and it worked
Click to expand...
Click to collapse
I ' ll try ... then say how it went
Sent from my MediaPad 7 Lite using Tapatalk HD
---------- Post added at 10:39 PM ---------- Previous post was at 10:19 PM ----------
Jbolho, my cpu has 1 ghz too. When i bought it also said 1.2 , but has not... sorry for bad english
Sent from my MediaPad 7 Lite using Tapatalk HD
Don't forget to close the HiSuite program on the pc, or you'll have the same problem.
I'm still deciding if i'm going to keep it or return it to the store. It's well built, it's not as sluggish as some say, it's actually very smooth after freezing some bloatware but... The CPU specs are faked, the Ram specs are faked, it can be easily rooted but has very low support, no roms and no kernels from the Dev community, the GPU is fast but not the most compatible, all Angry Birds don't run except the one pre-installed, neither Fifa 12 or the Psx Emulator...
I like the device but i feel scammed.
Sent from my Jelly-Beaned X8 using XDA app
R: [Q] huawei mediapads7 lite how to root?
anybody knows if this will work for the Mediapad 10 FHD 10.101u model ad well?
Sent from my GT-I9300 using xda app-developers app
Sorry for my bad english.
I rooted my huawei, but it really has not rooted. After i root it, i installed a original firmware from huawei and the root was up.
I had to root it again.
JBolho said:
I updated adb server and it worked but now i have a BIG question:
Why does SetCPU, and other similar apps, report 1ghz as the CPU max speed??? This is supposed to be an A8 single core 1.2Ghz, and it's sold with these reported specs... Is mine faulty? Can anyone confirm?
Click to expand...
Click to collapse
core is at 1GHz, 1.2 as stated on box is mistake so your tablet is not faulty
hello would like to help me with my recovery for tablet s7 932u there anywhere ..