Brightness issue - Galaxy S III Q&A, Help & Troubleshooting

I have a problem with the brightness function on my GS3. I have installed Omega V26 (JB) and did a good wipe (format data / format system / factory reset / wiped caches and fixed permissions). But somehow the brightness function isn't working well.
As soon as i've locked my GS3 and turn it back on, the brightness is at it's lowest, turning it on manually than it's fine as long as I don't lock my phone. I tried everything (disabled power saving option, smart stay, disable auto brightness, adjusting the browser brightness, installed third pary app like auto lux etc. The funny thing is, i don't have these problems on ICS based roms. Any ideas?

My advice is to ask in the thread of the Rom you downloaded. Maybe someone in there can help

donsimmi said:
My advice is to ask in the thread of the Rom you downloaded. Maybe someone in there can help
Click to expand...
Click to collapse
Ok, will do. Thanks!

Related

[Q] Photon CM9 Beta - Capacitive buttons (Menu, Home, Back, Search) not lighting up?!

I'm running the CM9 beta 0.2.0 by jokersax11 ([Ics] cm9 beta with camera CDMA/GSM/UMTS/HSDPA/WCDMA/roaming 2/22/12) and my capacitive touch buttons at the bottom of the screen*(Menu, Home, Back and Search) are not lighting up at all! I can't figure it out at all and I really need these buttons to light up, due to my recent switch from the LG Optimus S, and before that I had an AT&T HTC Inspire 4g (which have the home and menu buttons reversed). I use my phone alot at night and I desperately need to get this fixed! Is there something in the CM9 settings I'm overlooking? Or is there an app or mod that I could use to get control of them and get them working again? PLEASE HELP! I WOULD REALLY APPRECIATE ANY ADVICE OR ANY INFO ON HOW TO GET THESE BUTTONS TO LIGHT UP AGAIN! This is really frustrating!
Click the link below for the answer ...
http://forum.xda-developers.com/showthread.php?t=1526546
EDIT - Well that was fun. If you haven't figured it out, the link above goes to the other thread you started, with the same title, and the same body, in the same forum .... You should not create duplicate threads. For future reference best practice is create 1 thread and wait a minimum of 24 hours between bumps.
With that out of the way my actual advice is as follows, i dont believe the capacitive buttons are an issue with jokers CM build although i dont personally use it. This would indicate the answer lies in a) something you did b) something you didnt do c) something you installed
1. You can eliminate a and b without losing any info by going into your custom recovery and wiping cache and dalvik cache then doing a dirty flash on the rom (dirty flash = don't wipe data/factory). In this case there would be no reason to reflash gapps.
2. If that doesn't work, do a full wipe (data factory/system/dalvik) and reflash the ROM, then gapps. Be slow to in stall your apps and test the capicitive buttons frequently to ensure you haven't done anything to break them
Set the phone's brightness to Automatic.. Fixed..
People are so over dramatic sometimes lol.
Sent from my MB855 using Tapatalk
Thanks, that pointed me in the right direction. My auto brightness isn't working. I'm gonna do a "dirty flash" and see if that helps. Oh and btw,the second post was an accident and you can't delete your own thread.So, sorry about that.
eszumlas1985 said:
Thanks, that pointed me in the right direction. My auto brightness isn't working. I'm gonna do a "dirty flash" and see if that helps. Oh and btw,the second post was an accident and you can't delete your own thread.So, sorry about that.
Click to expand...
Click to collapse
Please come back and update the thread on if it works or not. Others may experience the same issue in the future and this thread could assist them.
Cheers!
i just now notices mine dont light up but o well my thumb pretty much know ware to push
Well, it's fixed. Don't know what the heck was going on but reflashed my CM9 & Google apps and voila my automatic brightness switch in settings started working again. No more problems and capacitive buttons work fine. Strange but at least it's fixed
Sent from my MB855 using xda premium
And sorry to anyone that needed a fix to this. I was involved in the tornado that hit Branson, Missouri and was unable to keep phone charged due to the power outage that lasted over a week, and had bigger things to worry about at the time, like getting shelter and food. But everything is ok now and hope this thread helps anyone that has this problem. Check to see if your automtic brightness switch is working under settings (mine wasn't working) So if it isn't working just reboot into recovery, wipe dalvik cache & /cache, and reflash your rom and gapps, then check in your settings to see if your automatic brightness is now working. If so your problem should be fixed and your capcitive buttons should now light up. It worked for me, hopefully it will work for you.
Sent from my MB855 using xda premium
eszumlas1985 said:
Check to see if your automtic brightness switch is working under settings (mine wasn't working) So if it isn't working just reboot into recovery, wipe dalvik cache & /cache, and reflash your rom and gapps, then check in your settings to see if your automatic brightness is now working. If so your problem should be fixed and your capcitive buttons should now light up. It worked for me, hopefully it will work for you.
Click to expand...
Click to collapse
Thanks man i just had to set the screen brightness to automatic and reboot once. It worked like a charm

[H] Problems with brightness

Hi all! I'm having some brightness issues on my Razr i and any help would be great!
I'm on stock 4.1.2 and was using Power Toggles brightness slider to change the brightness, but suddenly, with no changes on the phone, the brigthness level would change only after turning screen off/on. But the problem is not related to the app I think, because even auto brightness isn't working properly... I mean, when it has to get brighter, it works, but when it has to dim, again only if I turn off/on the screen.
Does anyone know what could be causing it?
Thanks in advance!
Sorry for the bad english.
luizlee86 said:
Hi all! I'm having some brightness issues on my Razr i and any help would be great!
I'm on stock 4.1.2 and was using Power Toggles brightness slider to change the brightness, but suddenly, with no changes on the phone, the brigthness level would change only after turning screen off/on. But the problem is not related to the app I think, because even auto brightness isn't working properly... I mean, when it has to get brighter, it works, but when it has to dim, again only if I turn off/on the screen.
Does anyone know what could be causing it?
Thanks in advance!
Sorry for the bad english.
Click to expand...
Click to collapse
Although you don't think the app is causing the brightness problem's I would recommend uninstalling it for troubleshooting purposes and seeing if after you have uninstalled the app and rebooted the phone if after some time the problem persists. This way we can rule out if the app is or isn't causing the problem.
shimp208 said:
Although you don't think the app is causing the brightness problem's I would recommend uninstalling it for troubleshooting purposes and seeing if after you have uninstalled the app and rebooted the phone if after some time the problem persists. This way we can rule out if the app is or isn't causing the problem.
Click to expand...
Click to collapse
Thanks for the reply. I did uninstall it and the problem remains... I installed volume slider (which has a brightness slider too) and the same happens: non "real time" brightness changing and the auto brightness still doesn't work properly... =/
luizlee86 said:
Thanks for the reply. I did uninstall it and the problem remains... I installed volume slider (which has a brightness slider too) and the same happens: non "real time" brightness changing and the auto brightness still doesn't work properly... =/
Click to expand...
Click to collapse
That is odd, I would recommend booting into recovery and performing a factory reset and then see if that fixes your problem.
shimp208 said:
That is odd, I would recommend booting into recovery and performing a factory reset and then see if that fixes your problem.
Click to expand...
Click to collapse
This is what I was afraid of... =/
I will just wait a little longer to see if anybody faced this issue before. I'm pretty sure a factory reset will do (since it started to act like this all of a sudden) but I want to find the cause so it won't happen again or, if it happens, I won't need to do a factory reset...
It's weird... what could make this issue appear? =/
luizlee86 said:
This is what I was afraid of... =/
I will just wait a little longer to see if anybody faced this issue before. I'm pretty sure a factory reset will do (since it started to act like this all of a sudden) but I want to find the cause so it won't happen again or, if it happens, I won't need to do a factory reset...
It's weird... what could make this issue appear? =/
Click to expand...
Click to collapse
One possible way of figuring out what is causing this issue to happen is to generate a logcat when you are adjusting the brightness settings and see if the log reports any background processes that are causing errors with the brightness control.
shimp208 said:
One possible way of figuring out what is causing this issue to happen is to generate a logcat when you are adjusting the brightness settings and see if the log reports any background processes that are causing errors with the brightness control.
Click to expand...
Click to collapse
Thanks for helping me!
I never generated a logcat before. So I installed CatLog from Store and generated a logcat doing the following:
1) Set brightness to auto
2) Put the phone under a lamp
3) Turned of all the lights: the brightness didn't change
4) Turned off and on the screen: when the screen turned on, the brightness was already on a lower level
The logcat is pretty messed... it shouldn't be like that right? =/
Is this helpful?
luizlee86 said:
Thanks for helping me!
I never generated a logcat before. So I installed CatLog from Store and generated a logcat doing the following:
1) Set brightness to auto
2) Put the phone under a lamp
3) Turned of all the lights: the brightness didn't change
4) Turned off and on the screen: when the screen turned on, the brightness was already on a lower level
The logcat is pretty messed... it shouldn't be like that right? =/
Is this helpful?
Click to expand...
Click to collapse
From looking at the logcat there is a lot of errors and warning messages with loading certain library files and Android runtime services that relate to power and screen brightness sensing. Another peculiar thing I noticed was that NFC seemed to be generating a couple error messages as well. Overall you were definitely right about it not being a normal log in this situation, I also like your testing methodology :good:.
shimp208 said:
From looking at the logcat there is a lot of errors and warning messages with loading certain library files and Android runtime services that relate to power and screen brightness sensing. Another peculiar thing I noticed was that NFC seemed to be generating a couple error messages as well. Overall you were definitely right about it not being a normal log in this situation, I also like your testing methodology :good:.
Click to expand...
Click to collapse
NFC is disabled... =/
Well, so any suggestion? Or just a factory reset would do?
luizlee86 said:
NFC is disabled... =/
Well, so any suggestion? Or just a factory reset would do?
Click to expand...
Click to collapse
Unfortunately a factory reset would probably be the best thing to do.
shimp208 said:
Unfortunately a factory reset would probably be the best thing to do.
Click to expand...
Click to collapse
Just wiped data through CWM and the autobrightness still doesn't work properly...when it has to get brighter, it gets, but when it has to dim, it doesn't...
luizlee86 said:
Just wiped data through CWM and the autobrightness still doesn't work properly...when it has to get brighter, it gets, but when it has to dim, it doesn't...
Click to expand...
Click to collapse
You could also try re-flashing the stock ROM to see if that fixes it, another suggestion that could possibly work is running a fix permissions utlity.
Reflashed stock rom and reinstalled all my apps. Everything was fine. Went to bed and woke up, the same problem with power toggles reappeared...
EDIT: found what was causing it! It is the latest version of Floating Notifications (when show on lockscreen is enabled)!
Thanks a lot shimp!
luizlee86 said:
Reflashed stock rom and reinstalled all my apps. Everything was fine. Went to bed and woke up, the same problem with power toggles reappeared...
Click to expand...
Click to collapse
That's wicked bizarre that even after all those things the problem still persists. You could try bringing it in to Verizon to see if they can do anything otherwise a hardware issue may have arisen.
Sent from my SCH-I535 using xda premium

[Q] Brightness changes in specific apps

For some reason I see the brightness changes automatically in certain apps.
The auto brightness is off and set to full.
The brightness dims in the following screens:
1. Open original browser it dims , if entering web address it is back to full. Chrome does not encounter same problem
2. Original samsung mail app (not GMAIL) dims. If writing a new mail (reply/forward) it goes back up.
The brightness in the browser settings is set to full (not auto).
I tried to find an answer on the web but could not find. It drives me crazy!!!
Must say that I have the phone for 3 months and it started only a few days ago.
the only thing I can remember is that I was on WIFI and it started to update apps but how can I know what was changed and [email protected]#$ed my brightness control?
I assume that you're using a stock (or stock-based) ROM. Try to enter settings and deactivate the power saving mode if it's enabled. Then reboot - just to be sure - and look if the issue is gone.
Can't think of anything else at the moment...
Hope it helps
In stock browser disable auto brightness setting.
Sent from my GT-I9100 using xda premium
kubeb said:
The brightness in the browser settings is set to full (not auto).
Click to expand...
Click to collapse
PINki92 said:
In stock browser disable auto brightness setting.
Click to expand...
Click to collapse
Helpful answer buddy, nice job
experience7 said:
I assume that you're using a stock (or stock-based) ROM. Try to enter settings and deactivate the power saving mode if it's enabled. Then reboot - just to be sure - and look if the issue is gone.
Can't think of anything else at the moment...
Hope it helps
Click to expand...
Click to collapse
I can't believe I missed it. I've tried brightness in stock browser, tried battery saving from brightness menu.
I just didn't notice the toggle of battery saving in the main menu.
Thanks...
Hah, nice to hear that youe problem has been solved

[Q] Help Brightness Flicker & No Control

Hey,
Updated from 4.2 to 4.3 hoping it was a glitch with 4.2 but my screen brightness flickers up and down what appears to be about 5 levels consistently (very fast, resembles a flickering) whenever the display is on. The brightness control also doesn't work, it has no effect on the brightness levels, you can slide it from one side to the other with no actual change.
This has an ill affect of draining the battery about 1% a minute when the display is on.
Anyone have a similar problem or know how to fix this?
I have the auto brightness unchecked and when enabled there is no change either.
xclaw said:
Hey,
Updated from 4.2 to 4.3 hoping it was a glitch with 4.2 but my screen brightness flickers up and down what appears to be about 5 levels consistently (very fast, resembles a flickering) whenever the display is on. The brightness control also doesn't work, it has no effect on the brightness levels, you can slide it from one side to the other with no actual change.
This has an ill affect of draining the battery about 1% a minute when the display is on.
Anyone have a similar problem or know how to fix this?
I have the auto brightness unchecked and when enabled there is no change either.
Click to expand...
Click to collapse
When you flashed to 4.3 did you do a wipe? Have you tried a reset at any time? If you just updated without wipe it would have retained any previous settings or conflicts that may cause this.
Sent from my C6833 using XDA Premium 4 mobile app
I'll do a quick backup and then try a wipe to see if that clears it up. Thanks for the suggestion.
maybe you has to sent to service central but before just update again ,hope will fine
Did all the wipes and no go, called up Bell and have her going in for a RMA check. Can't wait to see what they say.
xclaw said:
Did all the wipes and no go, called up Bell and have her going in for a RMA check. Can't wait to see what they say.
Click to expand...
Click to collapse
Are you sure you flashed the device correctly and followed the procedures in LordManhattan's guide or [NUT]/blueether's posts?

CM12 is out

I downloaded CM12 this morning using the updater. Auto update worked but lots of upgrade issues. Must update Framework but then things got better. Chrome is broken so I'm using stock browser. Recovery is awful. Make a backup before doing it but it sure is a start!
Sent from my Xperia Z Ultra using XDA Free mobile app
mknewman said:
I downloaded CM12 this morning using the updater. Auto update worked but lots of upgrade issues. Must update Framework but then things got better. Chrome is broken so I'm using stock browser. Recovery is awful. Make a backup before doing it but it sure is a start!
Sent from my Xperia Z Ultra using XDA Free mobile app
Click to expand...
Click to collapse
how did you install gapps? the recovery wont let me install them
I was able to. I had to copy it to internal sdcard though.
If you have FC crashes try uninstalling and reinstalling the apps. That helped me with several like News and Weather and Newsstand and Drive.
Sent from my SGP311 using XDA Free mobile app
mknewman said:
I was able to. I had to copy it to internal sdcard though.
If you have FC crashes try uninstalling and reinstalling the apps. That helped me with several like News and Weather and Newsstand and Drive.
Sent from my SGP311 using XDA Free mobile app
Click to expand...
Click to collapse
thanks. i thoght i edit my post, i found another gapps zip and put it on the internal storage and it installed ok.
most stuff works. swiftkey do not..
* Audio trough Bluetooth = broken
Rolle90 said:
thanks. i thoght i edit my post, i found another gapps zip and put it on the internal storage and it installed ok.
most stuff works. swiftkey do not..
* Audio trough Bluetooth = broken
Click to expand...
Click to collapse
Pretty decent nightly, had issue with backlight setting that messed up screen brightness after screen lock. Had to reflash, there was no way back. I would suggest people avoid playing with backlight setting for the meantime.
Flashed nano GAPPS from here http://forum.xda-developers.com/par...apps-official-to-date-pa-google-apps-t2943900
Rolle90 said:
* Audio trough Bluetooth = broken
Click to expand...
Click to collapse
Confirmed.
How often do you guys think cm will puch updates for this rom?
Rolle90 said:
How often do you guys think cm will puch updates for this rom?
Click to expand...
Click to collapse
Daily?
Just toght that the cm11 build did not get daily updates...
My Bluetooth is working fine, both to my Pebble watch and car.
I'm not sure what's up with backlight on this build. You have two options that seem to be the same on the DISPLAY settings, one says "Adaptive Brightness, Optimize brightness level for available light" and the other says "Adaptive Backlight, Dynamically adjust the brightness of the display's backlight to maximize battery life while maintaining usability".
The first one seems to adjust properly, and the slider bar does seem to set the upper limit for this level.
The 2nd one is a bit more problematic, I'm not really sure it works or how it functions in conjunction with the other one.
Anyone figure this out yet?
BTW I tried the full version of Lux with both of them turned off and it didn't end up well, the screen became so dark I ended up having to reboot and remove it.
Marc
restarted my phone two times and got BT audo, spotify works fine, but if i start Valiant Hearts the audio get realy static and laggy
EDIT:
New build just Launched!
Could you post some Screenshots? I'd like to see how application box and the main screen look like
Thanks!
Anyone tried from clean flash?
Has anyone tried flashing the nightly after doing a complete wipe? Seems like many of the problems mentioned may be avoided by a clean install.
If someone has done a clean install, can you let us know if there are any bugs remaining?
Thanks
mknewman said:
My Bluetooth is working fine, both to my Pebble watch and car.
I'm not sure what's up with backlight on this build. You have two options that seem to be the same on the DISPLAY settings, one says "Adaptive Brightness, Optimize brightness level for available light" and the other says "Adaptive Backlight, Dynamically adjust the brightness of the display's backlight to maximize battery life while maintaining usability".
The first one seems to adjust properly, and the slider bar does seem to set the upper limit for this level.
The 2nd one is a bit more problematic, I'm not really sure it works or how it functions in conjunction with the other one.
Anyone figure this out yet?
BTW I tried the full version of Lux with both of them turned off and it didn't end up well, the screen became so dark I ended up having to reboot and remove it.
Marc
Click to expand...
Click to collapse
The second is how the display reacts to the brightness of the displayed image on screen
---------- Post added at 07:15 AM ---------- Previous post was at 07:12 AM ----------
lkirkw said:
Has anyone tried flashing the nightly after doing a complete wipe? Seems like many of the problems mentioned may be avoided by a clean install.
If someone has done a clean install, can you let us know if there are any bugs remaining?
Thanks
Click to expand...
Click to collapse
.
I did a clean install. Not many problems here, BT audio stop working from time to time, (reboot fix the problem for a while)
Hey, do any of you guys have a flashable CWM recovery? I'd like to try to use it instead of CM's recovery.
alphaandomega said:
Hey, do any of you guys have a flashable CWM recovery? I'd like to try to use it instead of CM's recovery.
Click to expand...
Click to collapse
I've tried all sorts to put a different recovery on. Have ended up with no usable recovery on the phone. Only option is to put up with CM for now.
lkirkw said:
Has anyone tried flashing the nightly after doing a complete wipe? Seems like many of the problems mentioned may be avoided by a clean install.
Click to expand...
Click to collapse
Mine was a clean install, Bluetooth is the only problem for me.
mknewman said:
My Bluetooth is working fine, both to my Pebble watch and car.
I'm not sure what's up with backlight on this build. You have two options that seem to be the same on the DISPLAY settings, one says "Adaptive Brightness, Optimize brightness level for available light" and the other says "Adaptive Backlight, Dynamically adjust the brightness of the display's backlight to maximize battery life while maintaining usability".
The first one seems to adjust properly, and the slider bar does seem to set the upper limit for this level.
The 2nd one is a bit more problematic, I'm not really sure it works or how it functions in conjunction with the other one.
Anyone figure this out yet?
BTW I tried the full version of Lux with both of them turned off and it didn't end up well, the screen became so dark I ended up having to reboot and remove it.
Marc
Click to expand...
Click to collapse
I didn't bother with Lux, just playing with those two settings made my screen super dark, had to reflash.
alphaandomega said:
Hey, do any of you guys have a flashable CWM recovery? I'd like to try to use it instead of CM's recovery.
Click to expand...
Click to collapse
My understanding of the Z Ultra is that the kernel and recovery are both on the boot partition and are not actually separate. If you install TWRP or Philz you will wipe the CM12 kernel out and you won't boot, just be able to get into recovery. Those recoveries are built for stock/stock based installs where you can replace the kernel.
We will just have to wait for a good CM12 Recovery or boot to CM11 and use its recovery to backup /data and then reinstall CM12 before you boot up. I think I've seen that refered to hot booting recovery.
Please feel free to correct me if you are a dev and know more about this than me.
Marc
zs29a said:
I didn't bother with Lux, just playing with those two settings made my screen super dark, had to reflash.
Click to expand...
Click to collapse
Had the same issue. Just leave the second one (adaptive backlight) enabled and the dark screen should stop. You can adjust the first one at will

Categories

Resources