Related
Hi everyone.
That's my problem.
Last month I bought on the net a used Galaxy s2.
It arrived with this configuration
android version 2.3.7
number build MIUI 1.12.02
Kernel 2.6.35.14-Siyah v.2.1.1
modem XXKI4.
I decided to restore factory settings but after that the phone doesn't boot and I can't get into recovery mode (but I have no problem with download mode).
I thought maybe I do something wrong to get into recovery mode but I press simultaneuosly vol up+home+power for more than 30 sec without results.
I tried to flash the same kernel with odin but nothing to do.
Any idea?
Thanks for your help.
Try re-flash a root kernel with Odin such as Chainfire's CF-root.
It will re-install the custom CWM Recovery, then you can re-flash the ROM.zip with CWM Recovery directly from the sdcard.
Just read the instructions and FAQ on each thread exactly. If your not sure which CF-root kernel, just try.
Else, you can return to stock by flashing a ROM from Intratech's thread with Odin.
You will then have to re-root (if that's what you want).
Why cf-root? Hes on miui, he should flash another version of siyah/fluxi/xcell69 kernel with pc odin to make it work. Download mode - odin 1.85 - PDA = kernel - flash.
Btw if he did factory reset on recovery mode, its not a big problem, but if he did via in phone menu under 'about phone', i dont think my method above will work. That factory reset wiped everything and he should flash back to stock with odin.
Rom : Official MIUI 2.1.6
Kernel : Xcell-69X
Modem : XXKP8
Sent from Galaxy SII
I said "such as...."
Other than that, your just repeating repeating what I already said. Cheers
Sent from my GT-I9100 using xda premium
Firstable I thank you for your answers.
I solved my problem flashing a more recent Siyah Kernel.
After that the phone boots and now I can get into recovery mode,too.
No worries.
Sent from my GT-I9100 using xda premium
Hope someone can help I have lost both my download and cwm recovery so can't flash rom.
Mistakenly I flashed NOTE rom!! Bricked device but finally got it to boot. Now I can't flash roms nor access recovery via app or holding down buttons, any suggestions?
riz157 said:
Hope someone can help I have lost both my download and cwm recovery so can't flash rom.
Mistakenly I flashed NOTE rom!! Bricked device but finally got it to boot. Now I can't flash roms nor access recovery via app or holding down buttons, any suggestions?
Click to expand...
Click to collapse
Turn off the device, remove the battery, wait about 90 seconds an insert a jig (if you have it). If you don`t have a jig do the above, insert the battery and go in download mode (volume down + power button + menu button) and flash a stock rom with Odin 1.85. Roms`s can be found on sammobile.com or in Intratech`s thread (original development).
Good luck
gee2012 said:
Turn off the device, remove the battery, wait about 90 seconds an insert a jig (if you have it). If you don`t have a jig do the above, insert the battery and go in download mode (volume up + power button + menu button) and flash a stock rom with Odin 1.85. Roms`s can be found on sammobile.com or in Intratech`s thread (original development).
Good luck
Click to expand...
Click to collapse
Vol up + home + power is recovery mode, actually.
Vol down + home + power is download mode.
ctomgee said:
Vol up + home + power is recovery mode, actually.
Vol down + home + power is download mode.
Click to expand...
Click to collapse
You`re right, it`s late
Thanks guy but not working I can't get into download or recovery mode.
Sent from my HTC One X using Tapatalk 2
riz157 said:
Thanks guy but not working I can't get into download or recovery mode.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
Try a jig.
ctomgee said:
Try a jig.
Click to expand...
Click to collapse
Ok thanks will give that a go.
Sent from my HTC One X using Tapatalk 2
In the end took my s2 to local phone guy who fixed it within the hour. Cost 15 but he got it sorted.
Sent from my HTC One X using Tapatalk 2
Flashing I9000's rom. I can't get into recovery and download mod.
Soft brick or hard brick ?
Arnadel said:
Flashing I9000's rom. I can't get into recovery and download mod.
Soft brick or hard brick ?
Click to expand...
Click to collapse
Um... what? You flashed an I9000 ROM to your I9100? Is that what you're saying?
Arnadel said:
Flashing I9000's rom. I can't get into recovery and download mod.
Soft brick or hard brick ?
Click to expand...
Click to collapse
Read properly and flash correct firmware next time for 9100. the stickies help too....
Follow this soft brick guide:
http://forum.xda-developers.com/sho...UIDE] Fix an unflashable or soft bricked GSII
Sent from my GT-I9100 using xda premium
Stuck Galaxy S2
Hi,
I'm desperate about my Galaxy S2. Can't start or reach CWM menu after a failed firmware upgrade.
Tried ClockworkMod-Recovery_4.0.1.4 and CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5. Odin did its job successfully but I can't get CWM (Vol.up + Home + Power)
Only the boot up image. I can go to download mode only with a jig that doesn't reset counter.
A few days ago I got access to the CWM menu.
What am I doing wrong?
I would appreciate any help.
Thank you
Carlos (Portugal)
my s2 i9100 cnt boot n cnt put in recovery mode.
gee2012 said:
You`re right, it`s late
Click to expand...
Click to collapse
hi.. plz help me to fix this??
Hi guys
I have just flashed Omega v8.1 to my phone and reflashed CWM touch, rebooted into recovery and now my phone won't boot. It turns on and just displays the "Samsung Galaxy S3" screen. I have tried flashing via the Galaxy s 3 toolkit but this requires USB debugging to be enabled. It looks as though it is not enabled as the toolkit does not recognise my phone.. The only thing I can do is boot it into download mode.
Any clues??
Thanks
If you can go on download mode, then flash stock firmware via odin.
Sent from my GT-I9300 using xda premium
Firstly your phone is fine, it can be easily fixed one way or another.
Can you still boot into recovery?
If not, reflash recovery using ODIN via Download mode
Once you have access to the recovery, try wiping the following:
Data/Factory reset
Cache
Dalvik Cache
Format /system (probably not required but just in case)
And then reflash the omega ROM, making sure it is not corrupt; maybe redownload/check MD5 sum to be sure.
If, for whatever reason you are still having problems with the phone not booting into Android, I would try flashing a different ROM for the time being.
Also, you posted this in the wrong section
Just flash the stock rom?
Yep bricked phone isn't really a problem, unless it's hardware related.
Sent from my GT-I9300 using xda premium
prank1 said:
Firstly your phone is fine, it can be easily fixed one way or another.
Can you still boot into recovery?
If not, reflash recovery using ODIN via Download mode
Once you have access to the recovery, try wiping the following:
Data/Factory reset
Cache
Dalvik Cache
Format /system (probably not required but just in case)
And then reflash the omega ROM, making sure it is not corrupt; maybe redownload/check MD5 sum to be sure.
Also, you posted this in the wrong section
Click to expand...
Click to collapse
This right method, some times data ****ed up, so must wipe cache
Sent from my GT-I9300 using Tapatalk 2
Ive tried flashing stock ROM via ODIN through the toolkit but this requires USB debugging mode. The issue is not with Omega as I was able to use my phone after flashing, I think the CWM flash didnt work properly.
How else can I flash via ODIN, the toolkit is the only way I know.
Thanks for the comments guys...
brianwilkie76 said:
Ive tried flashing stock ROM via ODIN through the toolkit but this requires USB debugging mode. The issue is not with Omega as I was able to use my phone after flashing, I think the CWM flash didnt work properly.
How else can I flash via ODIN, the toolkit is the only way I know.
Thanks for the comments guys...
Click to expand...
Click to collapse
No it needs download mode.
Gesendet von meinem GT-I9300 mit Tapatalk 2
reflash cwm and see
Sent from my GT-I9300 using xda premium
brianwilkie76 said:
Ive tried flashing stock ROM via ODIN through the toolkit but this requires USB debugging mode. The issue is not with Omega as I was able to use my phone after flashing, I think the CWM flash didnt work properly.
How else can I flash via ODIN, the toolkit is the only way I know.
Thanks for the comments guys...
Click to expand...
Click to collapse
I d say, simply get odin separately, then re-create the same settings as when the toolkit does it.
It really is very simple once you ve done it once or twice Don t panic and take the time to make sure the right boxes are checked and double-triple check then reboot in Download mode, plug it in then gogo !
Tectas said:
No it needs download mode.
Gesendet von meinem GT-I9300 mit Tapatalk 2
Click to expand...
Click to collapse
If I select flash via odin in the toolkit (option 8), it says make sure that USB debugging is enabled... If i try and continue it just waits for usb debugging and does not flash.
brianwilkie76 said:
Ive tried flashing stock ROM via ODIN through the toolkit but this requires USB debugging mode. The issue is not with Omega as I was able to use my phone after flashing, I think the CWM flash didnt work properly.
How else can I flash via ODIN, the toolkit is the only way I know.
Thanks for the comments guys...
Click to expand...
Click to collapse
y u r usb debugging is disable? u have to enable it before doing any thing
Sent from my GT-I9300 using xda premium
brianwilkie76 said:
Ive tried flashing stock ROM via ODIN through the toolkit but this requires USB debugging mode. The issue is not with Omega as I was able to use my phone after flashing, I think the CWM flash didnt work properly.
How else can I flash via ODIN, the toolkit is the only way I know.
Thanks for the comments guys...
Click to expand...
Click to collapse
You can use odin without the toolkit for the meantime, just run it and put your phone on downlod mode
Sent from my GT-I9300 using xda premium
hisee said:
y u r usb debugging is disable? u have to enable it before doing any thing
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
It's always disabled after ROM flash and I keep forgetting to re enable it..
brianwilkie76 said:
If I select flash via odin in the toolkit (option 8), it says make sure that USB debugging is enabled... If i try and continue it just waits for usb debugging and does not flash.
Click to expand...
Click to collapse
Ok, sry, then the toolkit reboots your device first to download mode via adb, take the already given advice to use Odin itself, just download it put the Rom tar (or tar.md5) into pda, make sure that only auto reboot and reset time is checked, reboot to download mode continue by pressing up, plugin the cable and press the start button at Odin.
Gesendet von meinem GT-I9300 mit Tapatalk 2
Forget running the toolkit, forget USB debugging mode. You do not need it for now.
And there is no need to download or setup ODIN or anything like that.
Just go to folder/directory where you installed the toolkit (usually C:\Samsung Galaxy S3 ToolKit) and look for the file called 'Odin3_v3.07' or 'Odin3_v3.04' or whatever version you find. Then run it; tada, ODIN is running now!
Now, put your phone in download mode. To do this, hold VOL DOWN and HOME and POWER buttons together and let go when you see the 'Samsung Galaxy S III' logo come up.
Then it will load up a screen that says press VOL UP to continue (and enter download mode). Press it.
Now it should say 'Downloading do not turn off target!'
Connect your USB Cable and proceed to flash a new CWM recovery using ODIN
Then once you have flashed a new recovery, boot into it (VOL UP & HOME & POWER buttons together).
Then follow my instructions from my previous post.
prank1 said:
Firstly your phone is fine, it can be easily fixed one way or another.
Can you still boot into recovery?
If not, reflash recovery using ODIN via Download mode
Once you have access to the recovery, try wiping the following:
Data/Factory reset
Cache
Dalvik Cache
Format /system (probably not required but just in case)
And then reflash the omega ROM, making sure it is not corrupt; maybe redownload/check MD5 sum to be sure.
If, for whatever reason you are still having problems with the phone not booting into Android, I would try flashing a different ROM for the time being.
Click to expand...
Click to collapse
If you want to flash a stock ROM instead of CWM + Custom ROM then you can do that via ODIN as well.
heyy i am suffering with same problem
Hi i have galaxy s3
I was using Omega Rom happily since last month. But today i installed extended power menu and brightness fix mods from omega app. Then when the phone restarted it is stuck in boot (Samsung)
I did everything what could i do:
Re-installed CF-Root many times
Re-installed kernal siyah again
But nothing is happening its still stucked on the boot screen & it vibrates 2 3 times but the screen remains still on samsung logo
Guys plz tell me what should i do.
themude said:
heyy i am suffering with same problem
Hi i have galaxy s3
I was using Omega Rom happily since last month. But today i installed extended power menu and brightness fix mods from omega app. Then when the phone restarted it is stuck in boot (Samsung)
I did everything what could i do:
Re-installed CF-Root many times
Re-installed kernal siyah again
But nothing is happening its still stucked on the boot screen & it vibrates 2 3 times but the screen remains still on samsung logo
Guys plz tell me what should i do.
Click to expand...
Click to collapse
Boot into custom recovery (VOL UP & HOME & POWER buttons together)
Then:
Data/Factory reset
Wipe Cache
Wipe Dalvik Cache
Reboot into Android and see if that has fixed it; if not, then go back to CWM recovery and do the following:
Data/Factory reset
Wipe Cache
Wipe Dalvik Cache
Format /system (probably not required but just in case)
And then flash Omega ROM again
how? CMW is not opening the phone is only able to open in download mode nothing else. Its a fault with OMEGA 8.1 mods or maybe siyah beta kernal
how to start in recovery mode? If i press the 3 buttons it takes me to download mode
themude said:
how? CMW is not opening the phone is only able to open in download mode nothing else. Its a fault with OMEGA 8.1 mods or maybe siyah beta kernal
how to start in recovery mode? If i press the 3 buttons it takes me to download mode
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=UxaVXJJdhhk
How to enter RECOVERY mode on the Samsung Galaxy S3
1) Make sure the phone is turned OFF (take out battery, wait 10 seconds, replace battery, make sure nothing appears on screen)
2) Press+Hold the VOL UP and HOME buttons, together
3) Now, whilst holding these two buttons together, press+hold the POWER button
4) Keep all of these buttons held down, don't let go even if you see the 'Samsung Galaxy S III' logo screen, ignore it and keep holding those three buttons down
5) Once you see the recovery screen, you can let go of the buttons and start using the recovery as you wish
How to enter DOWNLOAD mode on the Samsung Galaxy S3
Follow all the steps as above, except at step 2) press+hold VOL DOWN and HOME buttons together
I had neatrom lite, then downloaded ROM manager and installed clockwork mod recovery. Then, I pressed "Reboot into clockwork mod recovery" and now the phone gets stuck at a black screen after Samsung logo PLEASE PEOPLE HELP ME OUT ON THIS
flash a kernel (siyah or fluxi for example) with odin
I already flashed siyah, nothing happens
FromiOSToAndroid said:
I already flashed siyah, nothing happens
Click to expand...
Click to collapse
hi! this happened to me about 2 days ago, what i did was i downloaded CF-Root v5.6, flashed the kernel using odin. Then reboot the phone, enter the recovery mode (volume up + home + power), wipe the data and install your old ROM or new ROM.
here's the link for the CF-Root
http://forum.xda-developers.com/showthread.php?t=1103399
hope it helps...
Happened to me yesterday, wanted to update miui, so reboot into recovery and was just a black screen. Wouldn't turn on or go in recovery mode. All I did was flash a no wipe rom (litening) using odin, to get me back in recovery mode, then flashed the updated miui zip. Lost nothing.
Fixed it finally. Easy fix
Sent from my GT-I9100 using Tapatalk 2
FromiOSToAndroid said:
Fixed it finally. Easy fix
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
How did you fix it?
hi, I have SGS-II I 9100. I was using root box 4 rom on my SGS-II with default kernel. All of a sudden day before yesterday the baseband and IMEI just vanished. Flashing the OEM rom seemed as solution. So I flashed the Android 4.1.2 India rom. It did flashed it successfully. The phone restarts and shows android logo and does something. When it restarts again it goes directly into recovery. I have tried with different versions but its still the same. Tried to flash Siyah kernel and Install custom rom. It still does that goes directly into CWM recovery screen. Can anyone help with this issue. I am clueless on how to fix it. Forgot to mention it does not reboot automatically. When clicked on reboot it shuts down. I then need to pull out the battery and get it back into it and then start the phone.
dimitrix730 said:
hi, I have SGS-II I 9100. I was using root box 4 rom on my SGS-II with default kernel. All of a sudden day before yesterday the baseband and IMEI just vanished. Flashing the OEM rom seemed as solution. So I flashed the Android 4.1.2 India rom. It did flashed it successfully. The phone restarts and shows android logo and does something. When it restarts again it goes directly into recovery. I have tried with different versions but its still the same. Tried to flash Siyah kernel and Install custom rom. It still does that goes directly into CWM recovery screen. Can anyone help with this issue. I am clueless on how to fix it. Forgot to mention it does not reboot automatically. When clicked on reboot it shuts down. I then need to pull out the battery and get it back into it and then start the phone.
Click to expand...
Click to collapse
Flash stock firmware again via Odin when you phone booting after flashing press volume up+home +power button for 10sec it's give you stock recovery then select wipe data factory reset then reboot your Device it will successfully boot
Sent from my GT-I9100 using xda premium
gauravgymnast08 said:
Flash stock firmware again via Odin when you phone booting after flashing press volume up+home +power button for 10sec it's give you stock recovery then select wipe data factory reset then reboot your Device it will successfully boot
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I did it twice. flashing 4.1.2 roms from different regions.did try factory reset. that too doesnt work. Still stuck at recovery screen. it just wont step out of it.
You flashed stock with odin and it go's to cwm? What did you flash? Were did you get it from?
andrewwright said:
You flashed stock with odin and it go's to cwm? What did you flash? Were did you get it from?
Click to expand...
Click to collapse
Thank-you for your reply. I flashed Stock i9100 from Sam firmwares. Gave a try to India, UK and italy edition. It does not go to CWM but rather goes into android recovery wizard. The screen where you see red triangle with android died or something. Its been more than a day and still cant find how to fix it. After flashing the stock firmware when i reboot my phone I get to a screen with android and status bar right at the bottom of it. Probably installs boot loader or something it the second screen once you reboot your phone after flashing the stock firmware. The next time you reboot you should be getting to OS right? But it takes me to recovery instead? What does it expect me to do in the recovery screen? I really don't know. I can access only 2 modes Download and recovery.
Here's the thing..3e recovery is the samsung default recovery mode whereas CWM is a customized one.
You either flash it via Odin or you flash a custom kernel via odin to get it.
Anyway, as long as you are NOT on 4.0.4 you can factory reset and wipe cache via stock recovery (3e).
Again, what did you flash exactly?
Sent from...this is not even my S2
So its the first time im messing with that staff.i wanted to flash omega rom at my s3. i tried to install but nothing happened so i tried to wipe my cache settings. when i pressed that option my phone stucked. it shows me the galaxy screen, then boots and shows the android icon for a sec and then the same again forever. i put off the battery, powered on the phone and again that problem. Even when its closed and i want to charge it it wont show ths battery icon but will start that boot thing. any ideas?
Can you get in download mode? If so then flash stock Rom with Odin.....see the stickies at top of the s3 general forum for all basics
slaphead20 said:
Can you get in download mode? If so then flash stock Rom with Odin.....see the stickies at top of the s3 general forum for all basics
Click to expand...
Click to collapse
Did that, and as Odin programm said i had a succesful installation. Then my phone rebooted and started the same ... :/
Can you boot into recovery? If so, do a factory reset, that usually sorts looping after an Odin flash
slaphead20 said:
Can you boot into recovery? If so, do a factory reset, that usually sorts looping after an Odin flash
Click to expand...
Click to collapse
I cant. only download mode. and that happened to me when i tried to do a factory reset
Check the Rom you downloaded,redownload etc etc
slaphead20 said:
Check the Rom you downloaded,redownload etc etc
Click to expand...
Click to collapse
You mean the stock ROM?
The problem i face is that and i cant enter nowhere
Write at youtube: Samsung Galaxy S3 stuck on screen
From Κώστας Καράς. I uploaded it, that's the problem im getting. and cant enter recovery mode
You just said you can get in to download mode?
slaphead20 said:
You just said you can get in to download mode?
Click to expand...
Click to collapse
I CAN enter download mode. i CANT enter recovery mode.
I entered the download mode, and installed the stock rom via Odin, but nothing happened. I've still the same problem
xokeistas25 said:
.i wanted to flash omega rom at my s3. i tried to install but nothing happened
Click to expand...
Click to collapse
How do you mean nothing happened? What happens when you power on the phone after first time flashed the omega rom?
And what happens when you try to hold volume up+home button + power button?
Sent from my GT-I9300 using Tapatalk 2
xokeistas25 said:
I CAN enter download mode. i CANT enter recovery mode.
I entered the download mode, and installed the stock rom via Odin, but nothing happened. I've still the same problem
Click to expand...
Click to collapse
Like I said, check the Rom you downloaded to make sure it's ok, the right one for your region, and redownload just in case it's corrupt
Unuce said:
How do you mean nothing happened? What happens when you power on the phone after first time flashed the omega rom?
And what happens when you try to hold volume up+home button + power button?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
When i do that, it does NOTHING!
slaphead20 said:
Like I said, check the Rom you downloaded to make sure it's ok, the right one for your region, and redownload just in case it's corrupt
Click to expand...
Click to collapse
Just downloaded stock rom from another link, installed via Odin and when it rebooted, it started the same thing :/
xokeistas25 said:
When i do that, it does NOTHING!
Just downloaded stock rom from another link, installed via Odin and when it rebooted, it started the same thing :/
Click to expand...
Click to collapse
Now pull battery then insert and try and get in recovery, if you can, then factory reset
slaphead20 said:
Now pull battery then insert and try and get in recovery, if you can, then factory reset
Click to expand...
Click to collapse
As i told you before, i cant. As soon as i press the buttons, it will start that weird thing
Via Odin flash Philz recovery and boot into recovery format sd card system data cache via mounts and storage .
If you cannot then its a service centre repair job .
Are you sure its an I9300 phone check under the battery .
jje
Will you please link to the stock Rom you are trying to flash
xokeistas25 said:
When i do that, it does NOTHING!
Just downloaded stock rom from another link, installed via Odin and when it rebooted, it started the same thing :/
Click to expand...
Click to collapse
It can't do nothing..
When you press power button after flash omega rom, did it powered on?
Sent from my GT-I9300 using Xparent Blue Tapatalk 2
slaphead20 said:
Will you please link to the stock Rom you are trying to flash
Click to expand...
Click to collapse
I followed this guide http://forum.xda-developers.com/showthread.php?t=2187081
JJEgan said:
Via Odin flash Philz recovery and boot into recovery format sd card system data cache via mounts and storage .
If you cannot then its a service centre repair job .
Are you sure its an I9300 phone check under the battery .
jje
Click to expand...
Click to collapse
Flashed Philz recovery and now its just stuck in the Galaxy i9300 screen with a small red exclamation mark at the top, left corner of the screen, and it keeps rebooting. Still cant enter recovery mode, just download mode.
Unuce said:
It can't do nothing..
When you press power button after flash omega rom, did it powered on?
Sent from my GT-I9300 using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
No, i said what's happening after that.
EDIT: A friend of my told me that, i need the appropriate firmware from here: http://www.sammobile.com/firmwares/1/
but with my phone being off i dont know how to find pda, etc