This kernel is based on teamhacksung's kernel for Jellybean
Many Thanks to:
Teamhacksung
Zacharias.maladroit
Onecosmic
ytt3r
TK Glitch
Ezekeel
Eugene373
franciscofranco
Sunra
scheichuwe
perka
sztupy, for his great work, to get usb host mode driver
mialwe
stratosk
F4k for the idea to flash bigmem libs
...
sources:
https://github.com/DerTeufel
Click to expand...
Click to collapse
Working on this kernel is taking many hours almost every day. With a small donation, you show me, that my work is appreciated by you.
If you like this kernel, please donate to me
Download link and changelog can be found here:
http://www.hellybean.com/jelly.html
Click to expand...
Click to collapse
Kernels with VC in the name are coming with Voodoo Color
reserved
Updating now.....
All good for me so far my gfs not the same luck
Fascinating AOKP Jelly Bean Sept 19 Tab Devil 1.4.1...
Flashed this, cleared dalvik and cache, samsung logo appears, then dissapears, and my screen stays black, touch keys do light up on press, but go out afterwards, can't get into recovery to go back to 1.4.1 kernel.
I know this was just released so just giving my feedback, and any ideas on how to get to recovery without starting using odin would be great.
Disneycast25 said:
Flashed this, cleared dalvik and cache, samsung logo appears, then dissapears, and my screen stays black, touch keys do light up on press, but go out afterwards, can't get into recovery to go back to 1.4.1 kernel.
I know this was just released so just giving my feedback, and any ideas on how to get to recovery without starting using odin would be great.
Click to expand...
Click to collapse
I've only booted it once so far I'm in the same boat now
Fascinating AOKP Jelly Bean Sept 19 Tab Devil 1.4.1...
Kaptinkrunk said:
I've only booted it once so far I'm in the same boat now
Fascinating AOKP Jelly Bean Sept 19 Tab Devil 1.4.1...
Click to expand...
Click to collapse
I will be updating the aokp tree tonight this kernel will prolly be comparable with the next build.
Sent from my Nexus 7 using Tapatalk 2
OK the updated on works fine haven't tested it much I'm still on the first one
Fascinating AOKP Jelly Bean Sept 19 Tab Devil 1.4.1...
Black screen after samsung on start up.... had to odin
LasVegasRomeo said:
Black screen after samsung on start up.... had to odin
Click to expand...
Click to collapse
Same thing here on my gfs phone
Fascinating AOKP Jelly Bean Sept 19 Tab Devil 1.5.2...
LasVegasRomeo said:
Black screen after samsung on start up.... had to odin
Click to expand...
Click to collapse
guess I'm doing that as well. Oh wells.
Good for me on CM10!
Edit: my radio is acting really funny and the issue with my phone not ringing has returned (which took me flashing back to stock to fix) . Just weird. :-\
Sent from my SCH-I500 using xda app-developers app
I thought my phone booted it bit I guess not it says 1.4.1 in my sys info
i tried to install it and it broke it the same as everyone else
Fascinating AOKP Jelly Bean Sept 19 Tab Devil 1.5.2...
Anyone give this a whirl on PA 2.13? I'm so tempted but the thread tells me to wait.
Edit: never mind, looks like it's not compatible over here either.
Updated AOKP to work with this kernel. Look for Sept-20.
Stephen.k.spear said:
Updated AOKP to work with this kernel. Look for Sept-20.
Click to expand...
Click to collapse
im about to put it to the test now lol man whats the deal ive been running across this data parts not right?
I'm gonna wait until I see its 100%
Sent From a Paranoid Android pondering who is after them on a Devil'd train ride Locomotive 1.4.1 that is 100% supercharger all the way!
Even though it sucked to Odin. Pretty quick to get it back to where it was before lol.
Sent from my SCH-I500 using xda premium
Please only flash this to roms, with the latest hw composer changes
Gesendet von meinem GT-I9000 mit Tapatalk 2
DerTeufel1980 said:
Please only flash this to roms, with the latest hw composer changes
Gesendet von meinem GT-I9000 mit Tapatalk 2
Click to expand...
Click to collapse
Ah thanks lol and its working fine just 2 issues so far no deep sleepies lol and USB no Mount in tab mode but thats rom
Fascinating AOKP Jelly Bean Sept 20 Tab Devil 1.5.2...
Working wonderfully on sept. 19 CM10 nighty
Related
MODERATOR WARNING!!!
ALL USERS - IF YOU DON'T KNOW HOW TO REINSTALL RECOVERY DO NOT FLASH THIS UNTIL FIXED!
This release is a port based on Jelly Beans for EVO 3D CDMA which based on source built Galaxy Nexus 4.1.1 Jellybean using Preludedrew's Evervolv JB as the base ROM. This ROM is very Alpha.
--------------------------------------------------
What Works:
Text
Charging
Battery Indicator
Brightness
Auto Rotation
Bluetooth
Hardware Buttons
Vibration
-----------------------------
What Doesn't Work:
Phone
Data
Audio
Camera
WiFi
USB Mounting
You Tell Me
-----------------------
ROM: Main Link
Flash via CWM
------------------
If you want a Root: Link
Flash via CWM
-----------------------
GAPPS: Mirror 1 Mirror 1
Flash via CWM
at least this is a rom=]
Will try.
THX.
Please mirror first link, because the speed is about 30kB/s.
Ohh No... I was so excited to taste JellyBean :laugh: but...
This Rom Have More bugs Than Features...
So I will Wait for Somtime
Wow!! Hope you can work better!
Amazing rom,thx dude
ps,can I release your work to some Chinese forum like xda.cn?
Now when base is done Devs will find fixes fast. Hardest part is over.
kifgep said:
ps,can I release your work to some Chinese forum like xda.cn?
Click to expand...
Click to collapse
yes sure
damn, looks like I was beaten... just as soon as I begin compiling my Jelly Bean
At least starting
Sent from my HTC EVO 3D X515m using xda app-developers app
Ubuntuz said:
damn, looks like I was beaten... just as soon as I begin compiling my Jelly Bean
Click to expand...
Click to collapse
If I understand right your JB should have less bugs and more feautures.
this is really nice i'll test it and see
thanx
Guys - don't complain on "bugs more than features/working stuff". As release is far self explainatory - "PreAlfa". Hit thanks for that our GSM is not left behind and there are devs working on getting JB to us. Waited for ICS for ages, can wait for JB sometime
Ubuntuz said:
damn, looks like I was beaten... just as soon as I begin compiling my Jelly Bean
Click to expand...
Click to collapse
Was it a race?
RU giving up now?
Can We Make Call And Listen Music In This Rom...????
If Yes, Then I Will Give A Try.......
Anybody can make some screenshots about this ROM ? thx.
ipsuvedi said:
Can We Make Call And Listen Music In This Rom...????
If Yes, Then I Will Give A Try.......
Click to expand...
Click to collapse
Why! Wouldn't you read the op? ._.
It clearly stated that phone and audio does not work.
sent from my mwakious3D ROM loaded EVO 3D x515m
it did not boot up stuck on htc screen
a7ad67 said:
it did not boot up stuck on htc screen
Click to expand...
Click to collapse
Make full wipe and try again. And remember sometimes boot can take up to 10 minutes.
Ubuntuz said:
damn, looks like I was beaten... just as soon as I begin compiling my Jelly Bean
Click to expand...
Click to collapse
lol.. yes you was ... I am curious to have jellybean..even sources are released now ... Hopping something better will come up.
i have make full wipe and Left the phone for like 15 min no thing happened
i am s-on and i flashed the boot.img via fast boot but i think some thing wrong with the rom it self
Hey everyone!
I just wanted to make a sort of poll where S3 user tell witch rom are using.
the idea is to copypaste the folowing and complete with your data
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Country:
Carrier:
Rooted?: [YES/NO]
kind of rom: [Stock/Custom]
Base: [BLXX/CM]
Rom: [name and version] / [Link]
Obs: [What you think about the rom]
Old roms: [Roms flashed before the current one]
Country: Argentina
Carrier: Personal
Rooted?: YES
kind of rom: Custom
Base: BLH3
Rom: Omega v13.1 ICS / http://forum.xda-developers.com/showthread.php?t=1663656
Obs: Goes really smooth. bat life is similar to stock. MIUI like toggle customize. I liked it.
Old roms: Stock
sorry to bash this but i use the master bedroom......
lol
WanamLite LI8
BrokenPixel said:
sorry to bash this but i use the master bedroom......
lol
WanamLite LI8
Click to expand...
Click to collapse
try the kitchen sometime mate..it is better!!
Hypergalaxy the best by far
Sent from my GT-I9300 using xda app-developers app
sitting room at the moment, but flashing to the kitchen soon, and then I'm beta testing the bedroom later
danielrodriguez87 said:
Hey everyone!
I just wanted to make a sort of poll where S3 user tell witch rom are using.
the idea is to copypaste the folowing and complete with your data
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Country:
Carrier:
Rooted?: [YES/NO]
kind of rom: [Stock/Custom]
Base: [BLXX/CM]
Rom: [name and version] / [Link]
Obs: [What you think about the rom]
Old roms: [Roms flashed before the current one]
Click to expand...
Click to collapse
My Signature speaks for me, My Roooom is Awesome!!!
slaphead20 said:
sitting room at the moment, but flashing to the kitchen soon, and then I'm beta testing the bedroom later
Click to expand...
Click to collapse
bedroom is for noobs!!
Bed room also lol....Omega ICS rom seems most stable to me.
Just flashed CM10 in my bedroom
Wrong thread
zoot1 said:
bedroom is for noobs!!
Click to expand...
Click to collapse
Built it from source myself, mattress fully debugged, framework and headboard tweaked, no memory foam leaks
Flashed them all,, end up going back to fox hound V13 ics final,siyah kernel ' stock modem..... then listen to some T.i "go get it" in my bedroom while my girl makes me food in the kitchen
Sent from my GT-I9300 using Xparent SkyBlue Tapatalk 2
ruk212 said:
Flashed them all,, end up going back to fox hound V13 ics final, then listen to some T.i "go get it" in my bedroom while my girl makes me food in the kitchen
Sent from my GT-I9300 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
dual boot?
slaphead20 said:
dual boot?
Click to expand...
Click to collapse
No I don't do that dual boot stuff anymore ' fried to many laptops dualbooting ubuntu/win7 this is my second s3 experimental time for me is over ' I've been running Resurrection Remix ics latest version with experia launcher for past 5 days, thats my second in command rom if I need a change, the jelly bean version of RR is tight too but I was getting force closes in some GAMES so switched to ics version because I couldn't be bothered to fix the issue ' for me nothing beats it for stable,smooth,99%no lagg, and rom control ( IMO) battery is decent too and I'm a heavy user
Sent from my GT-I9300 using Xparent SkyBlue Tapatalk 2
slaphead20 said:
Built it from source myself, mattress fully debugged, framework and headboard tweaked, no memory foam leaks
Click to expand...
Click to collapse
Have the original Bedroom keys been released? NO..so my friend you will have problems flashing through custom made doors.. And no org.. err.. Eargasm for you...
Maybe you can try with the stock mattress in the balcony next time.. Always works for me!!
Sent from the iPoop killer ==>>>
zoot1 said:
Have the original Bedroom keys been released? NO..so my friend you will have problems flashing through custom made doors.. And no org.. err.. Eargasm for you...
Maybe you can try with the stock mattress in the balcony next time.. Always works for me!!
Sent from the iPoop killer ==>>>
Click to expand...
Click to collapse
You can't run stock mattress on balcony, balcony is Samsung, this has been posted several times already
slaphead20 said:
You can't run stock mattress on balcony, balcony is Samsung, this has been posted several times already
Click to expand...
Click to collapse
You can bypass the restriction by booting into the custom position mode.. Clear the view by removing all the shades.... And dont forget to elevate the mattresses under the advanced settings..once booted enter the bedroom using the window...
By the way..op i am sorry that i have hijacked your thread..
Sent from the iPoop killer ==>>>
zoot1 said:
You can bypass the restriction by booting into the custom position mode.. Clear the view by removing all the shades.... And dont forget to elevate the mattresses under the advanced settings..once booted enter the bedroom using the window...
By the way..op i am sorry that i have hijacked your thread..
Sent from the iPoop killer ==>>>
Click to expand...
Click to collapse
Sorted.. . nice one zoots, I forgot to elevate the bed....I'm a noob
You show me where big karnal is please with twix as well .
jje
Just wanted to let the Galaxy 5 community know that I am running Jelly Bean (Cyanogenmod 10) with pretty much no problems
If you want a link to the .zip just ask in the comments below
brianmillar9 said:
Just wanted to let the Galaxy 5 community know that I am running Jelly Bean (Cyanogenmod 10) with pretty much no problems
If you want a link to the .zip just ask in the comments below
Click to expand...
Click to collapse
Please tell us the link....
iddu.daragah said:
Please tell us the link....
Click to expand...
Click to collapse
Download Mad Manager from Play Store Then go to Download ROMs and there will be some Developers like CM10 psyke83 you can download it and flash it via CWM...
XdaNoob98 said:
Download Mad Manager from Play Store Then go to Download ROMs and there will be some Developers like CM10 psyke83 you can download it and flash it via CWM...
Click to expand...
Click to collapse
heres the link i got it from on pc:
http://goo.im/devs/psyke83/roms/galaxy5/cm-10-20121024-MADTEAM-galaxy5.zip
But that rom still is not worked, psyke83 is missing bugreports of cm9 first for continue with cm10 and cm10.1
I have this rom.. works great
But, I can't find the CyanogenMod Settings
The CM settings are removed since CM9. You can find them in the whole settings application
"the whole settings application" ? Can you be a little more accurate?
I can't find them in settings.. I can only find some appearance settings from cm, and the device settings
The CM10.1 settings are now divided and built in the settings hoping you can follow me
XdaNoob98 said:
The CM10.1 settings are now divided and built in the settings hoping you can follow me
Click to expand...
Click to collapse
i heard that psyke83 wont update CM9 and CM10 . he will continue with CM10.1 . i have use it . its better and very suitable
for everyday usage
i installed CM10.1 but it too lag,why?how you can do it smoothly?
There is no way you can run cm10 smoothly on our device. Just stick to the cm7. Its the best thing developers made for G5. If you use more apps i reccomend you Esrom5 Bluedroid. It s gingerbread with jelly bean look. Works pretty smooth for me. No lag at all.
Poslato sa tapatalka using Pangalaktički Grgolj Blaster
I have CM10 and CM10.1 running perfectly as fast as CM7, thanks to a paid app on Play Store called Project Butter. I added also a bunch of init.d script for performance. My Galaxy 5 never become laggy using this sort of tricks, believe me, and i have also 92 apps installed, and some heavy and RAM hungry... i use also Greenify
Inviato dal mio GT-I5500 con Tapatalk 2
Jellybean on this phone will be great!
xdabphili said:
Jellybean on this phone will be great!
Click to expand...
Click to collapse
Is great, but try with Gingernexus... is really better :3:good:
Can u give link for gingernexus??
Sent from my GT-I9103 using Tapatalk 2
venkatraman said:
Can u give link for gingernexus??
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
Sure. i'll send a inbox message
Hugs
And what all the people think about cm 10.1 is stable like cm 7?
[ROM][PORT] AOKP JB-MR1 Build 5 | Android 4.2.2 - Galaxy S2 AT&T i777 [2013/03/07]
AOKP JB-MR1 SGH-i777 Build 5 | Android 4.2.2 [2013.03.05] [UNOFFICIAL-PORT] - [UPDATED]
CODE NAME: aokp_i777-userdebug 4.2.2 JDQ39 eng.sethyx.20130305.211647 test-keys Port_by_Jerad_v1.0
This ROM was not created by me, all creadits goes to the developers who spent their time to develope this roms [Android Open Kang Project (AOKP)].
All I did was just porting the offical i9100 AOKP build to our i777 device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Special Thanks to the Developer "rafyvitto" for taking time to write a tutorial for porting same range roms,
and also thanks "asasione" for the extended guide
Original ROM
AOKP JB-MR1 Official Build 5 i9100 2013.03.05
Android 4.2.2 ChangelogThe Latest AOKP Changelogs can be found on the AOKP site
v1.0 Port Details
Code:
[B]Updates -[/B]
Latest AJK Kernel 1.25 Final ([URL="http://forum.xda-developers.com/showthread.php?t=2110542"]Find the latest here[/URL])
[B]Changes -[/B]
No Changes - Pure AOKP
[B]BUG Fixes -[/B]
No Fixes - Just Ported ROM
[B]Known Issues -[/B]
Status Bar Quick Settings Toggle window "Swipe to Flip" not works
NFC feature is missing
Click to expand...
Click to collapse
If coming from a different rom, follow all the steps. If only upgrading, skip wiping data unless told to do so:
Make a Nandroid
Wipe data/factory reset in recovery
Wipe cache/dalvik-cache
Flash ROM
Flash GAPPS
Reboot
Click to expand...
Click to collapse
Rom:
aokp_i777_jb-mr1_build-5_unofficial-port_by_jerad_v1.0.zip - [BUILD UPDATED]
4.2.2 Gapps:
gapps-jb-20130301-signed.zip - [NEW]
Unofficial AOKP Boot Animation by Me:
aokp_bootanimation_unofficial_by_jerad_v1.0.zip - [NEW]
Click to expand...
Click to collapse
THANKS AND CREDITS TO:
- AOKP team
- CyanogenMod team
- Teamhacksung crew
- AJK Kernel Development Team
Developers spend countless of hours doing this for next to nothing. Posts, views, and donations encourage them, and everyone else who helps out.
Donate to Roman
Donate to Whitehawkx
Donate to Zaphod-Beeble
Donate to ProTekk
Donate to Sethyx
Donate to AOKP (Couldnt find the link - please let me know if know)
Donate to CyanogenMod
Donate to Teamhacksung
Kernel began life as a fork of Dorimanx's fine I9100 kernel.
Kernel Credits:
Donate to Dorimanx (Dorimanx Kernel)
Donate to Voku1987 (Dorimanx Kernel)
Donate to Alucard_24 (Dorimanx Kernel)
Donate to Entropy512 (CyanogenMod and much more for our i777)
Donate to Gokhanmoral (Siyah Kernel)[/SIZE]
If you like the rom please send them a donation as they will cherished and loved.
And if you like to donate me, you can always use the donate icon on left side under my profile image. And I will be much appreciate. :victory:
Click to expand...
Click to collapse
Please feel free to contribute for improove this rom. as im a newbe and still learning.
And please be note, that this is my second ported rom. so there might be few minor bugs. but im trying to update this much as possible. And will update the post here if there is any.
Enjoy, Cheers! :highfive:
Re: [ROM][PORT] AOKP JB-MR1 Build 4 | Android 4.2.2 - Galaxy S2 AT&T i777 [2013/02/25
First ^_^ but why don't you use the aokp boot animation?
Sent from my SGH-I777 using xda premium
Boot Animation Change
kufusoto said:
First ^_^ but why don't you use the aokp boot animation?
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
well... I didn't like the AOKP pink boot animation much..... (Prefer something blue and black like on CM to match the UI)
but this build came with the Nexus 4 boot animation. (But I replaced it because I prefer the earlier nexus animation than it)
anyway i'll upload the next version with nexus 4 boot animation or new aokp blue & black animation (tried to get this work but couldn't finish it converting to S2 devices).
and thanks for downloading... and let me know if you have any more suggestions.... really appreciate...
Not bad for a first time port. Everthing loaded ok plus I dropped in AJK 1.19 kernel to sweeten it up a little. I have been waiting for something with the new mali drivers to use the latest AJK with. Also I really like the boot animation myself. I am not a big fan of pink unicorns but I do miss the features of AOKP. I will give you a good review over in the AJK thread. Good work on your first try. I need to sit down and start learning how to port myself one of these days.
Re: [ROM][PORT] AOKP JB-MR1 Build 4 | Android 4.2.2 - Galaxy S2 AT&T i777 [2013/02/25
Are there any bugs on this?
Thanks I'll give it a try later
Re: [ROM][PORT] AOKP JB-MR1 Build 4 | Android 4.2.2 - Galaxy S2 AT&T i777 [2013/02/25
CarlosAbia said:
Are there any bugs on this?
Thanks I'll give it a try later
Click to expand...
Click to collapse
I can not vouch for this rom using the stock kernel since I have not ran it, but I have yet to run into any issues using AJK 1.19.
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
Re: [ROM][PORT] AOKP JB-MR1 Build 4 | Android 4.2.2 - Galaxy S2 AT&T i777 [2013/02/25
jerad_rutnam said:
well... I didn't like the AOKP pink boot animation much..... (Prefer something blue and black like on CM to match the UI)
but this build came with the Nexus 4 boot animation. (But I replaced it because I prefer the earlier nexus animation than it)
anyway i'll upload the next version with nexus 4 boot animation or new aokp blue & black animation (tried to get this work but couldn't finish it converting to S2 devices).
and thanks for downloading... and let me know if you have any more suggestions.... really appreciate...
Click to expand...
Click to collapse
I got what your saying, I just like the boot animation to match the ROM I use
Sent from my SGH-I777 using xda premium
kufusoto said:
I got what your saying, I just like the boot animation to match the ROM I use
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
I'd prefer no boot animation at all over anything with pink unicorns :laugh:
Thanks for the ROM! I can't wait to put it on my i777 to try.
twcobra said:
I can not vouch for this rom using the stock kernel since I have not ran it, but I have yet to run into any issues using AJK 1.19.
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
Can you tell me if Wi-Fi hotspot / tethering works?
i for one am happy that i dont have to look at the pink unicorn. thanx for the rom. going to give it a try as soon as i get some charge on me battery.
Re: [ROM][PORT] AOKP JB-MR1 Build 4 | Android 4.2.2 - Galaxy S2 AT&T i777 [2013/02/25
adoute said:
Can you tell me if Wi-Fi hotspot / tethering works?
Click to expand...
Click to collapse
Just got time to try it. I had my desk top running off my SII first try.
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
twcobra said:
Just got time to try it. I had my desk top running off my SII first try.
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for taking the time to test it. (I hit the thanks button, too)
Re: [ROM][PORT] AOKP JB-MR1 Build 4 | Android 4.2.2 - Galaxy S2 AT&T i777 [2013/02/25
Thanks for the port my good sir. I'm very happy with it. "Best of luck on future projects." Ned Dorsey.....keep up the good work.
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
Thanks
twcobra said:
Not bad for a first time port. Everthing loaded ok plus I dropped in AJK 1.19 kernel to sweeten it up a little.
Click to expand...
Click to collapse
Thanks a lot for the update mate, good to hear that it works with new AJK kernel update. because I too tried with 1.10 (latest at that time) but didn't support 4.2.2 at that moment. I sure give it a try when I get a time.
phermey said:
i for one am happy that i dont have to look at the pink unicorn. thanx for the rom. going to give it a try as soon as i get some charge on me battery.
Click to expand...
Click to collapse
Sure, you are welcome mate..
AJ Newkirk said:
I'd prefer no boot animation at all over anything with pink unicorns :laugh: Thanks for the ROM! I can't wait to put it on my i777 to try.
Click to expand...
Click to collapse
ha ha... :laugh: anyway let see if I can get it work the new boot animation conversion, then I can update it on my next release. and you are welcome.
adoute said:
Thanks for taking the time to test it. (I hit the thanks button, too)
Click to expand...
Click to collapse
Thanks..
twcobra said:
Just got time to try it. I had my desk top running off my SII first try.
Click to expand...
Click to collapse
Thanks a lot for checking it for me mate. much appreciate your support.
hoopas said:
Thanks for the port my good sir. I'm very happy with it. "Best of luck on future projects." Ned Dorsey.....keep up the good work.
Click to expand...
Click to collapse
you are welcome and thanks for all the encourage...
if you are reading this... scroll up and thank the op for porting this over.
bug. when i first installed and got the choose launcher popup... i tried to back out and it rebooted. not really an issue for me. just letting you know. maybe they all do that and i am an idiot for hitting back.
messaging. >attach>record audio does not work. i went through and turned on noise suppression but that didnt work either.
messaging. is there any way to up the amount of text in each message. i get 2.25 lines of text before it splits off to another one.
Re: [ROM][PORT] AOKP JB-MR1 Build 4 | Android 4.2.2 - Galaxy S2 AT&T i777 [2013/02/25
AJ Newkirk said:
I'd prefer no boot animation at all over anything with pink unicorns :laugh:
Thanks for the ROM! I can't wait to put it on my i777 to try.
Click to expand...
Click to collapse
I think unicorns are the s*** aj lol
Sent from my SGH-I777 using xda premium
Thanks for porting this - finally flashed it this morning, along with AJ's AJK v1.21a AOSP kernel. Everything seems to be working fine, except for wifi tethering. I can't get any devices to connect to my I777 using any kind of security. Setting it up as an open access point works, but either of the other security types cause other devices to not connect.
Has anyone been able to get tethering to work with security and AJ's kernel?
adoute said:
Thanks for porting this - finally flashed it this morning, along with AJ's AJK v1.21a AOSP kernel. Everything seems to be working fine, except for wifi tethering. I can't get any devices to connect to my I777 using any kind of security. Setting it up as an open access point works, but either of the other security types cause other devices to not connect.
Has anyone been able to get tethering to work with security and AJ's kernel?
Click to expand...
Click to collapse
you need version B i guess (from AJK thread):
v1.21b
-AOSP version has WiFi tethering w/security fixed
taze said:
you need version B i guess (from AJK thread):
v1.21b
-AOSP version has WiFi tethering w/security fixed
Click to expand...
Click to collapse
I forgot to post an update here. AJ released the b version after I asked about the tethering issue in his kernel thread - he had the same problem. Anyway, the b version works great - tethering with security, no problem.
I've been running with AJK for 2 days and everything has been running really smooth and stable. thanks for porting this awesome rom!
I've installed 2 versions of Jellybean on my GT-P7510, on both installs the volume is extremely low, making the device unusable for audio.
It was working perfectly on stock ICS.
Also, any notifications are at full volume.
I've tried tweaking every volume control I can find to no avail.
The installs were AOKP & Carbon.
Any ideas, anyone?
miklsmith said:
I've installed 2 versions of Jellybean on my GT-P7510, on both installs the volume is extremely low, making the device unusable for audio.
It was working perfectly on stock ICS.
Also, any notifications are at full volume.
I've tried tweaking every volume control I can find to no avail.
The installs were AOKP & Carbon.
Any ideas, anyone?
Click to expand...
Click to collapse
Try voodoosound
Thanks!
DefQoN_BE said:
Try voodoosound
Click to expand...
Click to collapse
Normal service restored-Cheers!
DefQoN_BE said:
Try voodoosound
Click to expand...
Click to collapse
How can I install voodoosound? I have aokp on my p7510 with stock kernel.
Sent from my SGH-T989 using xda app-developers app
Chaaqoti said:
How can I install voodoosound? I have aokp on my p7510 with stock kernel.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Install a kernel that supports it. A1 etc
Sent from my GT-P7510
dave106 said:
Install a kernel that supports it. A1 etc
Sent from my GT-P7510
Click to expand...
Click to collapse
I tried installing A1 kernel (made a post about this earlier, with no helpful responses)
But whenever I install it on my P7510 running CM 10.1 nightlies, the screen orientation flips, so the screen is always upside down, no matter how I hold it. I made sure that I installed the CM version of the A1 kernel as well. I've had to restore my nandroid backup each time to get the screen orientation back to normal. Any Idea why?
dave106 said:
Install a kernel that supports it. A1 etc
Sent from my GT-P7510
Click to expand...
Click to collapse
Prashramani12 said:
I tried installing A1 kernel (made a post about this earlier, with no helpful responses)
But whenever I install it on my P7510 running CM 10.1 nightlies, the screen orientation flips, so the screen is always upside down, no matter how I hold it. I made sure that I installed the CM version of the A1 kernel as well. I've had to restore my nandroid backup each time to get the screen orientation back to normal. Any Idea why?
Click to expand...
Click to collapse
I flashed this kernel with unofficial aokp 4.2.2 and I couldn't turn wifi on/off. Reverted back to my backup. I don't think this is compatible with jb roms, or is it?
Sent from my SGH-T989 using xda app-developers app
Chaaqoti said:
I flashed this kernel with unofficial aokp 4.2.2 and I couldn't turn wifi on/off. Reverted back to my backup. I don't think this is compatible with jb roms, or is it?
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
well i'm pretty sure there's no version available for aokp, but I know from the kernel thread that it is available for cyanogenmod. Maybe not cyanogenmod 10.1 though, but I'm not 100 percent sure