Related
Hi, everyone
i try to make cwm touch + newest version running on stock with GingerDX
I need testers since i have no time to test it myself
in attachment there is the cwm-rec.tar
if you're on stock kernel could you please try it
just copy it into /system/bin and set permission to all allowed(read,write,execute)(dont need all, but so it's simplier)
Be sure to have a backup, which you can launch with FPX/X-recovery
after overwriting cwm it's possible its not working anymore
please report back
if it works, dont work, dont start recovery and hangs up on boot or it starts and no touch, and so on
------------------------------------------------EDIT-------------------------------------------------------------------------
thank you all for you're replies
there were some problems mounting partitions, but now everything should work in this recovery, except touch
i'm still workin on that
and about naa-kernel, recovery actually it is possible, maybe if i have free time I'll make some workaround for loading an other recovery, even if it is completly pointless
check attachments for the "working" recovery THE NEW ONE IS THE ZIPPED
Screensh0t???
daddy_rhon said:
Screensh0t???
Click to expand...
Click to collapse
OMG!!!
This is CWM boss....
Think before you ask!!!!
Can you use it on nAa kernel?
Sent from my E15i using XDA Premium!
soumyasree said:
OMG!!!
This is CWM boss....
Think before you ask!!!!
Click to expand...
Click to collapse
You can still take screenshot with ddms.bat
Think before you speak
------------------
Is this the same recovery as the recovery that comes with Alfs kernel?
if you can replace in the kernel ramdisk file the recovery then the answer is yes, any other situation the answer is no...
soumyasree said:
OMG!!!
This is CWM boss....
Think before you ask!!!!
Click to expand...
Click to collapse
heheheh...I just only want to see the feature or whats inside of it cOmpare to other cwm,because i dont have idea what is look of touchrecovery,for now sounds good because its touch recovery...
DanneB. said:
Can you use it on nAa kernel?
Sent from my E15i using XDA Premium!
Click to expand...
Click to collapse
read before you post
THIS IS FOR STOCK KERNEL
and i dont know if works yet, this is why i need testers?
djnilse said:
read before you post
THIS IS FOR STOCK KERNEL
and i dont know if works yet, this is why i need testers?
Click to expand...
Click to collapse
I was woundering if you are gonna make it to nAa kernel.
Please hit Thanks button to support me!
Sent from my E15i using XDA Premium!
@djnilse
I tried it and the recovery is working for me but no touch.
But good work. Keep it up.
DanneB. said:
I was woundering if you are gonna make it to nAa kernel.
Please hit Thanks button to support me!
Sent from my E15i using XDA Premium!
Click to expand...
Click to collapse
very simple explanation...
nAa kernel (or any other custom kernel for that matter) already has CWM builtin
stock kernel does not.
now why in the world would anyone wanna make a CWM for a kernel that already has it?? if there really was... how does one invoke it?
also, u can forget about nAa making a kernel with touch CWM... go read his explanation why if u wanna know
Chris95X8 said:
You can still take screenshot with ddms.bat
Think before you speak
------------------
Is this the same recovery as the recovery that comes with Alfs kernel?
Click to expand...
Click to collapse
yes exactly
and anyone should know what cwmr looks like
atis112 said:
@djnilse
I tried it and the recovery is working for me but no touch.
But good work. Keep it up.
Click to expand...
Click to collapse
Confirmed... jumps into recovery but no response to touch.
*shakes fist at Stock Kernel*
Can someone tell me how to install this pls? D:
I installed xRecovery a long time ago... can I have both?
ty
Hi, i've tried to install this with Flashtool or manually put the files on system/bin and it didn't work. Someone please could post a more detailed tutorial or a update.zip? Thanks.
I try it : thanks djnilse
Lisa cihazımdan Tapatalk 2 ile gönderildi
Coffinator said:
Hi, i've tried to install this with Flashtool or manually put the files on system/bin and it didn't work. Someone please could post a more detailed tutorial or a update.zip? Thanks.
Click to expand...
Click to collapse
A more detailed tutorial is not needed.. You really just need to read what is written on the post first and be able to follow the instructions..
You haven't done this most simple of thngs..
Remember this is not a finished product and you may experience issues.. Report your issues as the OP has requested instead of asking for an update!
CtrlAltDelIrl said:
A more detailed tutorial is not needed.. You really just need to read what is written on the post first and be able to follow the instructions..
You haven't done this most simple of thngs..
Remember this is not a finished product and you may experience issues.. Report your issues as the OP has requested instead of asking for an update!
Click to expand...
Click to collapse
You really didn't understand the part where i ask for a possible update.ZIP, didn't you?
Coffinator said:
You really didn't understand the part where i ask for a possible update.ZIP, didn't you?
Click to expand...
Click to collapse
What makes you think I didn't understand? I understood totally..
This is a dev thread.. We should try to reply to the devs requests.. Not make more..
You messed up totally because you didn't read the OPs post and follow his instructions..
You'd probably try something foolish like use flashtool to install the update.zip anyway..
Kids these days!
CtrlAltDelIrl said:
What makes you think I didn't understand? I understood totally..
This is a dev thread.. We should try to reply to the devs requests.. Not make more..
You messed up totally because you didn't read the OPs post and follow his instructions..
You'd probably try something foolish like use flashtool to install the update.zip anyway..
Kids these days!
Click to expand...
Click to collapse
This is a forum and i have the right to post. If you don't like, IGNORE IT, don't try to be a yes-man to the developers, they don't need it.
Hi all, I was looking for a original firmware 1.6 donut (have my reason, so if someone need it, is here), but no luck, so I had to create one for myself, or something like that. Well you can download and flash it with FlashTool, put it in the folder firmware and flash. And sorry for my english
Sorry for not posting pics, happens is just had flashed to fix the build.prop and had the 3g, but it really works:angel:
Mediafire
yolchy said:
Hi all, I was looking for a original firmware 1.6 donut (have my reason, so if someone need it, is here), but no luck, so I had to create one for myself, or something like that. Well you can download and flash it with FlashTool, put it in the folder firmware and flash. And sorry for my english
Sorry for not posting pics, happens is just had flashed to fix the build.prop and had the 3g, but it really works:angel:
Mediafire
Click to expand...
Click to collapse
Will Try bro Thanks but use which kanel bro ?
kbit013 said:
Will Try bro Thanks but use which kanel bro ?
Click to expand...
Click to collapse
Lol, this is the original firmware the phone came with... original SE kernel is included.
SmG67 said:
Lol, this is the original firmware the phone came with... original SE kernel is included.
Click to expand...
Click to collapse
oh , thx bro sorry am noob.
kbit013 said:
oh , thx bro sorry am noob.
Click to expand...
Click to collapse
:good:That's right my friend SmG67, dont worry kbit013, the kernel include in the. ftf file, just flash like a kernel and wala , if u can upload some pic to see if it works:fingers-crossed:
This is for u20i right?? I'm currently looking u20a's firmware
yolchy said:
:good:That's right my friend SmG67, dont worry kbit013, the kernel include in the. ftf file, just flash like a kernel and wala , if u can upload some pic to see if it works:fingers-crossed:
Click to expand...
Click to collapse
For me it doesn't work. Led just blinks green every 7 seconds and that's it.
Sent from my LT26i
---------- Post added at 07:21 AM ---------- Previous post was at 07:19 AM ----------
art111 said:
This is for u20i right?? I'm currently looking u20a's firmware
Click to expand...
Click to collapse
Yes it is for u20i.
Sent from my LT26i
yolchy said:
Hi all, I was looking for a original firmware 1.6 donut (have my reason, so if someone need it, is here), but no luck, so I had to create one for myself, or something like that. Well you can download and flash it with FlashTool, put it in the folder firmware and flash. And sorry for my english
Sorry for not posting pics, happens is just had flashed to fix the build.prop and had the 3g, but it really works:angel:
Mediafire
Click to expand...
Click to collapse
May I ask you how did you do it?
"Life is like a box of chocolates, you never know what you'll get" - Forrest Gump
HooLIMAN87 said:
For me it doesn't work. Led just blinks green every 7 seconds and that's it.
Click to expand...
Click to collapse
Ok bro, worked perfectly for me, i will make a video tutorial flashing and u can see, but not now becouse im busy, but i will try today.
yolchy said:
Ok bro, worked perfectly for me, i will make a video tutorial flashing and u can see, but not now becouse im busy, but i will try today.
Click to expand...
Click to collapse
I know how to flash firmware, just saying that it's not working (and i was really curios to see what is look of first android os).
Sent from MiniCM7-nightly-11-01-2012 by nAa
HooLIMAN87 said:
I know how to flash firmware, just saying that it's not working (and i was really curios to see what is look of first android os).
Sent from MiniCM7-nightly-11-01-2012 by nAa
Click to expand...
Click to collapse
oo ok:good:, you have not lost anything, sry 4 my english
Hello XDA..!!
As we know it is currently becoming a Huge problem of not Working Touch screens by installing roms of other Devices ..!!
I heard that problem of my friend Echo juned .. know coming to you with 100% fixed this problem
Instructions..!! To fix ..!!
Download THIS firmware..!! (It is modified Active firmware .42 GB)
Flash it using "flashtool"
boot u r device (first boot can take 10 mins)
and u will see u r touch screen working know..!!..!!
After that install Your device FTF ..
Working on all devices ..!!
Hope this will help...!!..!!
Fix no 2
thanks to eh.zamani
by this tutorial:
1:flash your device gb .62 firmware
2:flash rage kernel
3:flash that wrong rom again
4:if wrong rom was ics,rom will not boot then remove the battery to turn phone off then flash .62 firmware again if it was gb,do the same work
5:wait until stock rom boots the touch will be fixed
Credit's..!!
xshanep19 (this is all his efforts) SPECIAL THANKS TO HIM
regards ..!!
officiallysonyrebel
downloading will test it on xperia mini sti5i which i killed touchscreen by other rom
dragonmasterx said:
downloading will test it on xperia mini sti5i which i killed touchscreen by other rom
Click to expand...
Click to collapse
ok.. plz report ..!!
not working on xperia mini tested it now
touchscreen works but not correctly i will try to flash an ics original kernel and the ics original ftf
MAN YOU STOLE THIS FIX!
Please ask xshanep19 and if you get the permissions to open the thread, give credits to him!
Here's his original post:
xshanep19 said:
I had same problem, i accidently installed something on my xperia mini which was for mini pro which caused touch screen to stop working, i flashed different stock firmware and so on, still the touch screen wouldnt work
i flashed Xperia Active (ST17i) firmware 4.0.2.A.0.42_CE.ftf onto my xperia mini (st15i) in flashtool, then flashed stock mini firmware 4.0.2.A.0.62 afterwards
my touchscreen is working again
im not sure if this will work for anyone else, just thought id share what i did...
Click to expand...
Click to collapse
So please ask him, this is the way we're doing it on xda!
mihahn said:
MAN YOU STOLE THIS FIX!
Please ask xshanep19 and if you get the permissions to open the thread, give credits to him!
Here's his original post:
So please ask him, this is the way we're doing it on xda!
Click to expand...
Click to collapse
Deleted
officiallysonyrebel said:
srry didn't know about that cause was working on it .. since 1 month and got this fix ... and it not exactly same because i have changed some files
in active ftf..!! and i make fixes of my own and if i share fixes by other's I always write share there..!!
Click to expand...
Click to collapse
You can't change files in ftf, because ftf is sony signed so this is impossible! So I think you took it from the post I mentioned before!
Delete...
Till-Kruspe said:
Delete...
Click to expand...
Click to collapse
Reported it, too. Let's see how the mod decides!
officiallysonyrebel as stated this has been shared previously however not in it's own thread so in the spirit of sharing it's fine to post it up however you must give credits to where you found it. It also seems that your guide is not complete as you can't stop at just flashing the active FTF which is a stock Sony file not modified so please don't tell people it is. For it to fully work you need to then flash the stock firmware for the device over the top as per xshanep19's instructions.
To clear everything up please complete your instructions and also link to xshanep19's post to say the instructions are also there but you're just making them available for everyone who might not see that post.
Thanks
AvRS
AvRS said:
officiallysonyrebel as stated this has been shared previously however not in it's own thread so in the spirit of sharing it's fine to post it up however you must give credits to where you found it. It also seems that your guide is not complete as you can't stop at just flashing the active FTF which is a stock Sony file not modified so please don't tell people it is. For it to fully work you need to then flash the stock firmware for the device over the top as per xshanep19's instructions.
To clear everything up please complete your instructions and also link to xshanep19's post to say the instructions are also there but you're just making them available for everyone who might not see that post.
Thanks
AvRS
Click to expand...
Click to collapse
thanx mod doing it asap .. because when i was editing it my internet connection (doesn't know What happen..!!)
mihahn said:
MAN YOU STOLE THIS FIX!
Please ask xshanep19 and if you get the permissions to open the thread, give credits to him!
Here's his original post:
So please ask him, this is the way we're doing it on xda!
Click to expand...
Click to collapse
srry bro It was not me with this account .. was in tution at that time and my younger just messed up everything sorry again..!! hope u understand..!!:angel:
Btw I don't think that the phone will boot up completely with the active ftf. I think you have to flash the ftf for your device first, before you will get it booting, or am I wrong?
mihahn said:
Btw I don't think that the phone will boot up completely with the active ftf. I think you have to flash the ftf for your device first, before you will get it booting, or am I wrong?
Click to expand...
Click to collapse
nope i think as from one person .. used this and he said that phone is booting and touch screen is working .. but not correctly u just have to flash Your specific device FTF ..!! and touch screen working after that..!!
officiallysonyrebel said:
nope i think as from one person .. used this and he said that phone is booting and touch screen is working .. but not correctly u just have to flash Your specific device FTF ..!! and touch screen working after that..!!
Click to expand...
Click to collapse
Okay this could work, just thought because of different libs...
But I won't test it and tinker with my touchscreen
mihahn said:
Okay this could work, just thought because of different libs...
But I won't test it and tinker with my touchscreen
Click to expand...
Click to collapse
Please confirm if anyone Succeded
Sent from my S7 using xda premium
---------- Post added at 09:37 PM ---------- Previous post was at 09:27 PM ----------
Is it work for unlock BL Or just for lockBL, Thanks
Sent from my S7 using xda premium
sjeik1985 said:
Please confirm if anyone Succeded
Click to expand...
Click to collapse
I know it doesn't work for me. I already replied in the other thread as well
stuck at flashtool
I followed the steps as mentioned by you and while flashing you given rom i get this error....
ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_STATIC="IMAGE_ADDRESS_RANGE";ERR_DYNAMIC="SIN-block eraseblock mismatch";
and it aborts flashing......may i know where i am going wrong. I am desperate to get my phone working.:crying:
Arbelzapf said:
I know it doesn't work for me. I already replied in the other thread as well
Click to expand...
Click to collapse
What's ur device? It's lockBL or unlockBL
Sent from my S7 using xda premium
Xperia mini pro with locked bl:fingers-crossed:
by the way i have unlocked the bl and proceeded but no results yet
Well, I bought a Xperia S, I read the tutorials in the forum, but still some questions...
What is the 1st thing that I need to do?(I really don't understand the correct order to do the the things).
Is there anything special to install the Rom or it is just copy do SD and install?
Thanks for the help, and sorry for the english
I hope I am posting on the correct area
X.DragonSlayer.X said:
Well, I bought a Xperia S, I read the tutorials in the forum, but still some questions...
What is the 1st thing that I need to do?(I really don't understand the correct order to do the the things).
Is there anything special to install the Rom or it is just copy do SD and install?
Thanks for the help, and sorry for the english
I hope I am posting on the correct area
Click to expand...
Click to collapse
1) Not the correct forum
Go to Xpeia S forum
2)Yes just copy to sd card and flash via CWM
3)more instructions will be given by the rom thread it self like ( wipe caches and all)
jatinrungta said:
1) Not the correct forum
Go to Xpeia S forum
2)Yes just copy to sd card and flash via CWM
3)more instructions will be given by the rom thread it self like ( wipe caches and all)
Click to expand...
Click to collapse
Thanks for it,I specially wanna install the Cyanogen 10 but I not finding the thread of it.
Only now I saw that have an specific area for S, facepalm for me.
Waiting for a mod move to the correct session.
X.DragonSlayer.X said:
Thanks for it,I specially wanna install the Cyanogen 10 but I not finding the thread of it.
Only now I saw that have an specific area for S, facepalm for me.
Waiting for a mod move to the correct session.
Click to expand...
Click to collapse
You need to flash cm10 provided kernel to install cm10..
Sent from my ST18i
skb6T9 said:
You need to flash cm10 provided kernel to install cm10..
Sent from my ST18i
Click to expand...
Click to collapse
I need to use flashtool to install the kernel?
Where can i find download links for the ROM and the kernel, and the tools.
I I saw a lot on the site, but i don't know, which of they are for Xperia S.
I am completely newbie on this, so be patient with me =D
X.DragonSlayer.X said:
I need to use flashtool to install the kernel?
Where can i find download links for the ROM and the kernel, and the tools.
I I saw a lot on the site, but i don't know, which of they are for Xperia S.
I am completely newbie on this, so be patient with me =D
Click to expand...
Click to collapse
Yes u need flashtool.
http://get.cm
All cyanogenmod official builds are here. U have to know your devices' nickname. As Xperia ray is called urushi.
Press thnx if I helped.
Sent from my ST18i
X.DragonSlayer.X said:
I need to use flashtool to install the kernel?
Where can i find download links for the ROM and the kernel, and the tools.
I I saw a lot on the site, but i don't know, which of they are for Xperia S.
I am completely newbie on this, so be patient with me =D
Click to expand...
Click to collapse
You need unlocked bootloader for CM!!
skb6T9 said:
Yes u need flashtool.
All cyanogenmod official builds are here. U have to know your devices' nickname. As Xperia ray is called urushi.
Press thnx if I helped.
Sent from my ST18i
Click to expand...
Click to collapse
Thank you all, I am really learning how to go on with the rom install, if possible can you say what is Xperia S nickname?, all my tries on the google was fail....
I will download boot looader and flash tool, but i still wanna know the correct sequence to do the proceeds.
X.DragonSlayer.X said:
Thank you all, I am really learning how to go on with the rom install, if possible can you say what is Xperia S nickname?, all my tries on the google was fail....
I will download boot looader and flash tool, but i still wanna know the correct sequence to do the proceeds.
Click to expand...
Click to collapse
http://www.gsmarena.com/sony_xperia_s-4369.php
Your devices nickname is nozomi...
Press thnx if I helped..
Sent from my ST18i
X.DragonSlayer.X said:
but i still wanna know the correct sequence to do the proceeds.
Click to expand...
Click to collapse
Buddy:
- root and unlock your bootloader
- download CM10 for nozomi
- open the zip file and take the boot.img from the zip (this is the kernel with CWM)
- put the rom in your internal memory
- then do this:
if you use windows xp or vista/7 you have in accesorries CMD program. Run it and type:
cd \
cd flashtool
cd x10flasher_lib
NOW connect phone when you hold Vol UP and type:
fastboot flash boot boot.img
- restart the phone and when you see the logo start clicking vol + to enter CWM
- wipe data, wipe cashe, wipe dalvic cashe
- install zip
- wipe again and reboot
- enjoy
Well, i think i am getting it, but just one more question..
What's the difference between nightly and stable?
X.DragonSlayer.X said:
Well, i think i am getting it, but just one more question..
What's the difference between nightly and stable?
Click to expand...
Click to collapse
The nightly builds have many bugs & they are not so stable...
But the stable builds don't have that much bugs... It is always preferred for everyday use..
Press thnx if I helped.
Sent from my ST18i
skb6T9 said:
The nightly builds have many bugs & they are not so stable...
But the stable builds don't have that much bugs... It is always preferred for everyday use..
Press thnx if I helped.
Sent from my ST18i
Click to expand...
Click to collapse
Thanks, I think i will go with stable:laugh:
Just checking...
1-Unlock de bootloader
2-Root the cellphone
3-Install the ROM?
X.DragonSlayer.X said:
Thanks, I think i will go with stable:laugh:
Just checking...
1-Unlock de bootloader
2-Root the cellphone
3-Install the ROM?
Click to expand...
Click to collapse
1. Unlock bootloader
2. Root phone
3. Flash kernel
4. Install rom & gapps with CWM.
5. Reboot
Press thnx if I helped.
Sent from my ST18i
skb6T9 said:
1. Unlock bootloader
2. Root phone
3. Flash kernel
4. Install rom & gapps with CWM.
5. Reboot
Press thnx if I helped.
Sent from my ST18i
Click to expand...
Click to collapse
What is CWM?
The Kernel comes with the ROM?
X.DragonSlayer.X said:
What is CWM?
The Kernel comes with the ROM?
Click to expand...
Click to collapse
Cwm is the short form of ClockWorkMod.
It's a recovery software for android phones.(as u can see BIOS in pc. Not exactly but that's the them.)
It comes with custom kernels. For devices with locked bootloader u hav to install it separately.
Press thnx if I helped.
Sent from my ST18i
So, if my device is already unlocked i don't need to install separately?
X.DragonSlayer.X said:
So, if my device is already unlocked i don't need to install separately?
Click to expand...
Click to collapse
No that's not ri8.
If your device is unlocked and your device has a custom kernel then u dont need to install it separately.
Press thnx if I helped.
Sent from my ST18i
well i wanna know if our device support those mobile odin? i don't have pc right now. so, if i my star support those mobile odin i can flash recovery key combo fix directly from my device. so that i will be able to tweak my star without worrying of messing it.. well im so excited to use mobile odin if supported... anyone who had test please tell me
kima09 said:
well i wanna know if our device support those mobile odin? i don't have pc right now. so, if i my star support those mobile odin i can flash recovery key combo fix directly from my device. so that i will be able to tweak my star without worrying of messing it.. well im so excited to use mobile odin if supported... anyone who had test please tell me
Click to expand...
Click to collapse
maybe... but i don;t know about it..
but if you only want to flash already recovery key combo fix and have cwm installed and is rooted.. i may provide you with cwm flashable fix..
psych.half said:
maybe... but i don;t know about it..
but if you only want to flash already recovery key combo fix and have cwm installed and is rooted.. i may provide you with cwm flashable fix..
Click to expand...
Click to collapse
Its made by chainfire so it will most probably work
psych.half said:
maybe... but i don;t know about it..
but if you only want to flash already recovery key combo fix and have cwm installed and is rooted.. i may provide you with cwm flashable fix..
Click to expand...
Click to collapse
yeah my phone is already rooted and have cwm install. if you could provide me flashable zip, it would be sooo great....
yea thank you in advance
T3snake said:
Its made by chainfire so it will most probably work
Click to expand...
Click to collapse
i think it will just say "Device not supported" or something like that.. :|
kima09 said:
yeah my phone is already rooted and have cwm install. if you could provide me flashable zip, it would be sooo great....
yea thank you in advance
Click to expand...
Click to collapse
i will upload to the same fix thread in general section.. will ya test it.?. O__O
Buddy, Mobile Odin is not supported for our s5282, but u can test it by downloading apk from google.com , if it works then post here
psych.half said:
i think it will just say "Device not supported" or something like that.. :|
i will upload to the same fix thread in general section.. will ya test it.?. O__O
Click to expand...
Click to collapse
yeah sure... i had tested the first fix post but not working. i think that odin flashable file will be better than the first one. which need to flash as bootloader...
ill test your file if you upload
kima09 said:
yeah sure... i had tested the first fix post but not working. i think that odin flashable file will be better than the first one. which need to flash as bootloader...
ill test your file if you upload
Click to expand...
Click to collapse
you mean in the orginal dev thread? that is same as stock.. infact it doesn't even have init.d support.. >_>
okay.. uploading it right now.. do test and report.. check my thread in the General section
psych.half said:
you mean in the orginal dev thread? that is same as stock.. infact it doesn't even have init.d support.. >_>
okay.. uploading it right now.. do test and report.. check my thread in the General section
Click to expand...
Click to collapse
yeah, just test it. it works perfectly..oh, i can't say how thankful i am to you.....