[Q] Omega v26.1 - no data connection - Galaxy S III Q&A, Help & Troubleshooting

I'm a noob here, but have been running Omega v11 ICS for a while no problems.
Upgraded to v26.1 Jellybean today with a full wipe. All good except i've just noticed that I now have no data connection when not connected to wifi.
I have mobile data selected in settings, and data is turned on in the 15 toggle buttons.
I have done a search on the Omega thread but cant find anything, and can't post on there being a noob.
Am I missing something obvious?
Thanks

Try reflash. Or just flash other modem
Sent from my GT-I9300 using xda app-developers app

Do you have a modem / your older working modem .
Correct CSC or did you check correct Mobile network settings .
IMEI number same as under the battery .
jje

Arsaw said:
Try reflash. Or just flash other modem
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I have reflashed, but no change.
I have also tried modem BWLH1 but no success.
Works fine for voice but not data.
Might have to go back to ICS

I have restored back to my previous ICS backup of Omega v11 and all is fine.
It's a shame as Jellybean looked good and seemed faster and smoother
I may try upgrading again a few versions down the line.

Hi mate, I have the same issue on all JB Leaks - not really sure what causes it so I'm back on ICS too.

Related

[Q] 3g wont switch to HSPA after sleep on ICS

Dear All,
I've went ahead and flashed Sensation Rom a while back with full wipe etc.
Ive noticed that on my network (Cytamobile Cyprus) everytime my phone went to sleep after woken it will never switch from 3g to H, giving horrible speeds as a result -200 300kbps. However if data network was turned off and back on - H would work and i would get full speed. Ive tried a variety of ICS roms (even the official carrier update) and modems, even tried flashing a GB modem that I was using on my GB rom - no results.
Please Help.
Currently had to restore back to GB where my connection works fine.
If anyone has any advice on the matter I would really appreciate. I really like ICS
Best Regards
N!K!
Doesn't anybody have the same problem?
Backup, FULL wipe and give wanamlite ICS ROM a try.
If you still have connectivity issues, then flash various modems from the modem thread to gain best reception/stability/speed etc.
Sent from my GT-I9100 using xda premium
UpInTheAir said:
Backup, FULL wipe and give wanamlite ICS ROM a try.
If you still have connectivity issues, then flash various modems from the modem thread to gain best reception/stability/speed etc.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Will try and report back.
N!K! said:
Will try and report back.
Click to expand...
Click to collapse
I've had the same issue running Resurection remix 1.8.
Fixed it with a full wipe and RR 1.9.1.
dwightvanbentem said:
I've had the same issue running Resurection remix 1.8.
Fixed it with a full wipe and RR 1.9.1.
Click to expand...
Click to collapse
Thank you all. RR 1.9.1 fixed my problem. On the other hand too many SODs guess will have to reflash something else.

[Q] Cannot Connect Wifi Although The Signal is Good

I've installed Jelly Bean custom ROM for Samsung Galaxy S3; then when I tried to connect to the wifi, my phone shows that the signal is very strong. After a minute of connecting, it shows a message "Network disabled, poor connection". The wifi setting was saved, but still can't connect to the internet. Then I flash it back to its original ICS ROM, and it easily connect to the wifi.
There is 2 different JB Custom ROM that I tried, and both of them are having the same issue. What should I do?
I've search this problem and found some answers, but those answers are not working for me.. Please help..
Wait for Samsung to release JB instead of using Beta test roms .
jje
JJEgan said:
Wait for Samsung to release JB instead of using Beta test roms .
jje
Click to expand...
Click to collapse
Exactly
Press thanks if i helped!
Try changing your modem, had the same problem when installed RR JB rom, reinstalled it and changed modem and worked perfect.
Sent from my GT-I9300 using xda app-developers app
andresantos said:
Try changing your modem, had the same problem when installed RR JB rom, reinstalled it and changed modem and worked perfect.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Even though modem has nothing to do with the WiFi signal .
jje
JJEgan said:
Even though modem has nothing to do with the WiFi signal .
jje
Click to expand...
Click to collapse
OK well worked for me when flashed ROM again and changed modem. I guess I changed something else at the same time then.
Sent from my GT-I9300 using xda app-developers app
stefannosusanto said:
I've installed Jelly Bean custom ROM for Samsung Galaxy S3; then when I tried to connect to the wifi, my phone shows that the signal is very strong. After a minute of connecting, it shows a message "Network disabled, poor connection". The wifi setting was saved, but still can't connect to the internet. Then I flash it back to its original ICS ROM, and it easily connect to the wifi.
There is 2 different JB Custom ROM that I tried, and both of them are having the same issue. What should I do?
I've search this problem and found some answers, but those answers are not working for me.. Please help..
Click to expand...
Click to collapse
Which roms have you tried? I have the same problem but it's only on the latest leak (DLH6). Wi-Fi on roms based on DLH4 works fine for me.
Sent from my GT-I9300 using xda premium
metalk9 said:
Which roms have you tried? I have the same problem but it's only on the latest leak (DLH6). Wi-Fi on roms based on DLH4 works fine for me.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I've faced the same issue with DLH 6 BUT not DLH4.
---------- Post added at 10:46 PM ---------- Previous post was at 10:45 PM ----------
andresantos said:
Try changing your modem, had the same problem when installed RR JB rom, reinstalled it and changed modem and worked perfect.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Which modem did you switch too? Worth a try.
Its because of WIFI encryption, remove the password and try.
It's a bug in the leaked builds, they're BETA so you can't blame anyone but yourself.
it seems some people also had success after changing from wpa2 key to wpa key on there router.
I've the same problem.
I used to use Resurrection Remix JB 3.0.6.1 and everything worked fine. Then I flashed another CriskeloRom v13 (both are JB), and WIFI worked fine as well.
The problem was: when I flashed back to RR Rom, I couldn't connect any of the WIFI access points (actually, I tried 2) though the signal is very strong. I tried different settings and I also reset the APs and it didn't work at all. I also tried different modems and it didn't work either. Then I tried to re-flash both ROMs and found something may help:
1. flash RR: pass (before this the ROM was an unknown 4.0.3 version came together with the new phone)
2. flash CrisKelo: pass
3. flash RR: fail
4. flash RR with different modems: fail
5. flash RR ICS: fail
6. flash RR: fail
7. flash CrisKelo: pass
8. flash RR: fail
Anyone can give me some hint? What I need is the RR JB ROM with WIFI connections!
Sorry I can't paste external links because of the privilege, and both ROMs can be found at galaxys3.roms-db.com.
Best regards,
Same problem here. Running CheckROM v5.5. Have tried 2 different kernels (Perseus and Siyah). Hopefully the XXDLIH release will fix it....

[Q] How to get mobile network state working in new Jelly Bean I9300XXDLIB firmware?

Hi Everyone,
Today i installed and tried two roms today and both are giving me the same problem i cannot get my mobile data connection working?
I installed both the roms below full wipes etc but cannot get my mobile data connection to work, when i look under status and mobile network state it always says it is disconnected. WiFi works fine but mobile data cannot seem to connect? Has anyone else experienced this and how did you fix it?
[ROM][XXDLIB][25Sep] Omega v27 ●►Omega Files Kitchen◄●Jelly Bean+ICS●►7 Themes◄●
[ROM] Android Revolution HD 11.0.0 | High Quality & Performance | AROMA | Jelly Bean
Regards
Rockyuk
Could be the modem.
Sent from my GT-I9300 using xda app-developers app
I'm having the same problem after installing Checkrom V5.5 JB. No data connection whatsoever. I've had to go back to ICS for now.
Has anyone found a solution???
Nas Eiesefpi said:
Could be the modem.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Well it has been working with every other rom previous to these only when i have updated to these ones has the modem stopped working.
Rockyuk
SOLUTION FOUND:
You need to change your APN settings. I installed Checkrom V5.5 and it came with Virgin APN settings by default. I entered by Tmobile details and it's working perfectly. (was nothing to do with modem settings).
Hope that helps
I think it might be a modem firmware issue does anyone know what modems works well with UK T-mobile and i will flash my phone and see if that makes a difference?
Rockyuk
samosa11 said:
SOLUTION FOUND:
You need to change your APN settings. I installed Checkrom V5.5 and it came with Virgin APN settings by default. I entered by Tmobile details and it's working perfectly. (was nothing to do with modem settings).
Hope that helps
Click to expand...
Click to collapse
Hi samosa11,
Yep that worked for me also thank you.
Rockyuk

[Q] Network Problem with Paranoid Android 2.5. Please help..

Hi all,
I installed PA v2.5. Everything worked well except my phone network signal. It is not detecting any signal. Did every thing i could do. wiped system/factory reset, wiped cache partition and dalvik cache. Fixed permissions. Formatted system. tried installing rom a number of times. Changed kernels from stock kernel to siyah 4.1.3 and 5.0. But none of the method worked. Please suggest the way i can get my phone signals as without network signal, it doesn't remain a phone.
Have you tried flashing another modem? You can download a modem here.
Why don't you try to install an other kernel? Different from siyah and stock... As kernels define how hardware work...
singhsidhartha said:
Hi all,
I installed PA v2.5. Everything worked well except my phone network signal. It is not detecting any signal. Did every thing i could do. wiped system/factory reset, wiped cache partition and dalvik cache. Fixed permissions. Formatted system. tried installing rom a number of times. Changed kernels from stock kernel to siyah 4.1.3 and 5.0. But none of the method worked. Please suggest the way i can get my phone signals as without network signal, it doesn't remain a phone.
Click to expand...
Click to collapse
You installed siyah 4.1.3 with PA 2.5? They're not compatible and the phone shouldn't even have booted.
Anyways, if you're not able to get a signal, your modem has probably changed. You can check if the modem currently on your phone (settings>about phone) is the same as the one you originally had. ( I assume you've noted down your original modem details somewhere. And flash that modem from the link mentioned above. It should work
Sent from my GT-I9100 using xda app-developers app
so please suggest some other kernel.
riro1612 said:
Why don't you try to install an other kernel? Different from siyah and stock... As kernels define how hardware work...
Click to expand...
Click to collapse
so please suggest some other kernel that works fine with pa 2.5. Should i use dorimax like??
so please suggest some other kernel.
HAXTREME said:
You installed siyah 4.1.3 with PA 2.5? They're not compatible and the phone shouldn't even have booted.
Anyways, if you're not able to get a signal, your modem has probably changed. You can check if the modem currently on your phone (settings>about phone) is the same as the one you originally had. ( I assume you've noted down your original modem details somewhere. And flash that modem from the link mentioned above. It should work
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
so please suggest some other kernel that works fine with pa2.5. I had installed i9100DDLPA base version originally. and now i have flashed it. still not getting signal. sometimes it appears but disappear next moment. it happens frequently. Now i have switched to stock ics 4.0.3. but i want this rom. i flashed resurrection remix and found same problem. but flashing stock modem fixed it. But its not working with pa.
Use siyah 5.0 or dorimanx 7.4 (or higher if there's a later release.) I think the siyah dev gokhanmoral has blocked siyah 5.0 downloads for some reason, so use dorimanx 7.x for now.
Flash the PA ROM, it'll automatically install the default kernel its using. You can install dorimanx after that. And then if necessary, the modem that works for you. Also you can use the getRIL app to match your radio and baseband. May help.
Sent from my GT-I9100 using xda app-developers app
Ok. Check if it works.
Sent from my GT-I9100 using xda app-developers app
singhsidhartha said:
Ok. Check if it works.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Hi, i love PA too but we have the same issue. Not exactly the same though. I get signal when i boot my phone, i get an H signal (the highest i could get before the issue) but after flashing PA, it drops to E only after about 2minutes. Pls pls reply back if you found a solution. I have tried different modems and kernels already, verified that Siyah 5 is not compatible, tried DorimanX, same thing. Tried 2 different version of PA, no luck. Not to mention that i also tried another sim.
GetRil did it..
Hurraaayyy....
getRil app solved the problem.:laugh: It gave me the option of flashing modems which were matching my phones modem hardware. Thanks to all guys who helped me. Thanks a lot. Anyone having the same problem as of mine or any network related problem please give a try to getRIL app. May be it could work for you too.
LInk: http://forum.xda-developers.com/showthread.php?t=1187681

[Q] Data connection problem on all custom roms

I have a S3(i9300) and its been just few days i have been using it. Since the Touch Wiz environment was boring i decided to flash custom roms. I started with ParanoidAndroid, the rom was snappy and smooth like butter but then as i left my house and had to switch on my data package it showed data package indication on status bar but never actually worked. Then i decided to try Cyanogenmod 10.1, still no luck.
Everything works well, even the wifi works great but the data package made me shift back to stock rom. No matter what custom rom it is the data package never works. I really want to stay on cm10.1. I wish i can get some help from here.
P.S. - I tried flashing newer modem bt it still didn't work. HELP ME!
Sammy based on ROM works or not?
Do you have any applications that possible act like firewall to block connection? Because I have been kinda situation once which made me crazy...
Sent from my GT-I9300 using xda premium
qtwrk said:
Sammy based on ROM works or not?
Do you have any applications that possible act like firewall to block connection? Because I have been kinda situation once which made me crazy...
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
The ROM works great. I haven't installed any other apps except what all comes with the cm10.1 ROM.
Check your APN settings
GR0S said:
Check your APN settings
Click to expand...
Click to collapse
What should i check in the APN settings? I have my service provider's wap and mms
I reconfigured my APN settings but still it's not working. HELP me guys :"(
Standard reply .
IMEI correct
Modem correct for network .
CSC likewise .
Sim Card change .
Try the relevant rom Q&A threads
As its not ALL: custom roms try Samsung based custom rom .
jje

Categories

Resources