[KERNEL][23/07] █░ SGSII | 2.6.35.7-MirageS2 [v5]- STOP BATT DRAIN | OC 1600mhz ░█
Firstly, I'm not responsable if you brick your phone doing overclock or a bad use of this kernel. So, be careful.
This kernel is built from a custom modified source by me (I've added and modified some things to an updated SGS2 source), I've tried to modify it to get the lowest battery drain, so this kernel should stay in a step between performance and battery, if you like some more performance you can download SetCPU, or other custom app to modify freqs and default governor.
What's included:
-For XXKG1/G2/G3 (should work with olders too)
-Modified Freq range 11 steps (200-400-500-600-800-900-1000-1200-1400-1504-1600 Mhz)
-CPU UV sysinterface (thanks to ninphetamine)
-Modified cpufreq.c to force processor to go step-by-step in freqs.
-Default Freq: 500-1200 Mhz ondemand (the best to get low batt drain, should drain lower in sleep)
-Lowest maximum freq blocked to 400mhz (so if you put 200-200, it will run 200-400, locked due to better performance)
-Available governors: interactive-smartass-conservative-userspace-powersave-ondemand-performance (custom modded smartass, ondemand and interactive governors)
-CFS Scheduler.
-SLQB Allocator.
-CFQ Block IO Scheduler (Available: no-op, deadline, cfq)
-Modified Initramfs from saturn_de (thanks to him and Chainfire) - I've added some values to this init.rc to get lower battery drain and some performance. (some different from saturn)
-CWM 4.0.0.2 Recovery
-Disabled Profiling support and debugs, added ThumbEE, Improved Control Group Support.
-Added some CFQ IO tweaks
-Changed dalvikvm heapsize to 60m (this should improve performance on tasking)
-Touchscreen fix added (thanks to vicenzo91)
*[email protected]
*[email protected]
*int:fast is not included due to performance problems.
*not compatible with tegrak OC (tested with SetCPU)
test with performance 1504mhz, vfs_cache_pressure=100 and dalvik 64m (default vfs=70, you can modify it downloading Sysctl Config from Market)
v5:
*set samsung-update1 as base (fix reboots)
*added slqb patch
*removed bfq
Download:
SERVERS:
[USA]SGSII-2.6.35.7-MirageS2-v5
[DEUTSCHLAND]SGSII-2.6.35.7-MirageS2-v5
[Mirror]http://sgsii.z4mb0.net/Kernels/SGSII-2.6.35.7-MirageS2-v5.tar Mirror by El TeKi thanks
reserved.....
Wow nice to see you here. Will try it out immediately
Sent from my GT-I9100 using XDA Premium App
looks really really really promising... trying it now
how come i only get scores around 3200 with every rom and kernel? and everyone else has so high
going to try this one soon
yeaaa baby !!
Good to see you here Neo. Been a Aurax/Reflex fan on the Desire...
This is good news!
Regards
Awesome, will try this when i get home
Sent from my GT-I9100 using XDA Premium App
Just flashed. Oc to 1.5ghz. First quadrant 4566
will give feedback on batt consumption soon
Hope to see soon a rom made by you..... On my old desire i had your auraxtsense!!! U are great
Very nice neo. I'm a fan of your desire rom.. now u make a kernel for sgs2. No doubt, i will try it in the future. I hope u release your own version rom for sgs2.
+1
Sent from my GT-I9100 using XDA App
+2
Sent from my GT-I9100 using XDA App
trunks986 said:
Hope to see soon a rom made by you..... On my old desire i had your auraxtsense!!! U are great
Click to expand...
Click to collapse
Soon mate, soon. Thanks
Holy shiznit,who would've thought we'd be seeing you here Neo?I gotta thank you for the first rom that made me actually love my Desire.Not the only one,but it was the first whatsoever.
I'd like to tell you a thing or two(or three ) though.
1)You should add support for SetCPU's voltage control.I know there are other apps that do the same thing,but the number of people using SetCPU is massive.And on the Galaxy S 2,undervolting is very important,especially to avoid issues with overheating.
2)Could you pleaaaase lower the max clock by only 4MHz?My phone is unstable at 1504MHz with 1350mV,while it's rock stable at 1500Mhz with 1325mV.And I'm serious,4MHz only and it makes a huge difference,while performance-wise it's the same.
3)You could also overclock the GPU.200MHz with 750mV min and 400MHz with 1100mV max seems stable for everyone.You can gain quite a lot of performance,while it doesn't heat or consume more.You can also test if what I say is true yourself.
Else that those three...Well,welcome to our world pal!The world of power!
I don't know what you did to get 5000 in productivity on smartbench11 cos I can't hit more than 4300 even with the vfs setting changed...and yes I am overclocked to 1.5ghz and locked there.
Hi can make a kernel with default clock with 1,5ghz please ?
Yanardag said:
Hi can make a kernel with default clock with 1,5ghz please ?
Click to expand...
Click to collapse
Just download SetCPU and set the min and max to full.
Mirror http://www.megaupload.com/?d=4LLP5HPF
Another mirror http://www.multiupload.com/L215724GBY
Just flashed your kernel. Thanks
Is auto brightness broken ? The brightness goes to 100% on autobrightness eventhough it is night and there is no light
Tried wiping dalvik cache but did not help
EDIT: Covering the light sensors with a black blanket did not change anything. So there seems to be a problem with auto brightness. I am on stock KG1 leaked rom
What exactly is the I/O scheduler and what does each setting do?
I'm running aerovan ics kernel for miui if that helps.
guyz i want to know the default governor and scheduler for xperia p jelly bean,...is it interactive/cfq, or ondemand/cfq?
i think its ondemand because it was a default in my setcpu sitting
I believe ondemand is the usual stock governor.
whats the best CPU I/O Scheduler settings and whats the best Governor setting. Sent from my I605 GNOTE Paradigm version 3.1-ish 4.2.2> Kernel 3.0.76 soapkernel_06-SOA dirty
Hey!
First time using agni kernel on Nougat NOS rom, can someone please tell me best settings for balance performance? Like no lag, smooth but good battery backup?
Never used this kernel, only radon and still lag sometimes with balanced settings.
Thanks! Appreciate all info!
According to Agni dev, kernel will improve with time, I am also using Nitrogen with Agni, and I also experienced lags on first day. Wait for a full day of use, and don't turn your device off. It should improve.
icnn said:
Hey!
First time using agni kernel on Nougat NOS rom, can someone please tell me best settings for balance performance? Like no lag, smooth but good battery backup?
Never used this kernel, only radon and still lag sometimes with balanced settings.
Thanks! Appreciate all info!
Click to expand...
Click to collapse
Use this settings:
In Agni control all cpu Freq. To lowest ( MINIMUM and MAXIMUM both do it low Freq)
Big governer interactive glassfish, small governer interactive glassfish.
Hotplug - intelliplug
GPU Freq. To lowest in Agni control.
Lz4 zram off for 3gb ram and If 2gb ram variant then Lz4 zram 256 set.
Adreno idler on
In spectrum app, set profile to battery.
Last one can be ignored outdoor since it dims brightness.
Then save your current setting. and Reboot.
If it lags for you in beginning don't worry.
It will adapt your usage and it will be smooth the more you use.
Try this :-
Governor big cluster- Interactive glassfish
Governor small cluster- Interactive glassfish
CPU Max freq big cluster - 1612
CPU Max freq little cluster- 1382
CPU Min freq big cluster- default
CPU Min freq little cluster- default.
CPU hotplugging - Intelliplug
GPU Max freq- 550
GPU Min freq- 133
Adreno Idler - On
Z4 RAM - 500 mb
Rest all default.