Related
So I don't know why, but the RUU exe files just don't work for me. I've done everything but start fresh on my PC, but it's exam week in a computer modeling class and I just can't do that right now!
I've had nothing but problems since I attempted one of the 2-step processes out there for updating to the radios/kernels, so I really want to get through an RUU so I know I'm clean at my lowest levels.
I have found the PH98...zip files for the shipped version of the ROM, but thoes don't work due to my version of HBOOT (not mainver.. that never got updated).
Does anyone out there have one for the newest RUU? At this point, I think flashing that from HBOOT is the only option I have.
I have no idea how to extract it myself, so I can do that too if someone can tell me how!
Thanks for any help.
a-jive said:
So I don't know why, but the RUU exe files just don't work for me. I've done everything but start fresh on my PC, but it's exam week in a computer modeling class and I just can't do that right now!
I've had nothing but problems since I attempted one of the 2-step processes out there for updating to the radios/kernels, so I really want to get through an RUU so I know I'm clean at my lowest levels.
I have found the PH98...zip files for the shipped version of the ROM, but thoes don't work due to my version of HBOOT (not mainver.. that never got updated).
Does anyone out there have one for the newest RUU? At this point, I think flashing that from HBOOT is the only option I have.
I have no idea how to extract it myself, so I can do that too if someone can tell me how!
Thanks for any help.
Click to expand...
Click to collapse
u can just pull the "rom.zip" from the RUU and rename to PH98IMG.zip and ur good to go.
dl this for a how-to on how to do this..
http://forum.xda-developers.com/attachment.php?attachmentid=486701&d=1294753279
You did relock your bootloader before running the RUU right?
andybones said:
u can just pull the "rom.zip" from the RUU and rename to PH98IMG.zip and ur good to go.
dl this for a how-to on how to do this..
http://forum.xda-developers.com/attachment.php?attachmentid=486701&d=1294753279
Click to expand...
Click to collapse
Awesome, thanks!
OLDsJUNKIE said:
You did relock your bootloader before running the RUU right?
Click to expand...
Click to collapse
Oh yeah. Really, tried everything. It sees the phone, reads the current build, goes through the next screen or two, and then once it says "Rebooting to Bootloader" it either sits there for a couple minutes till it times out and errors or errors immediately. I cannot find any other posts of people having problems, so I'm really at a loss. Makes me worried about having more troubles once the official ICS build comes out... but I probably have a lot of time till then.
Thanks guys!
Tried this as well, and my phone is not seeing the file
Make sure you are naming the file correctly "PH98IMG. zip" the instructions provided give a different file name than want the Rezound uses.
a-jive said:
Make sure you are naming the file correctly "PH98IMG. zip" the instructions provided give a different file name than want the Rezound uses.
Click to expand...
Click to collapse
I updated to the latest ota that verizon sent out. I didnt flash a rom, only perm rooted/unlocked...I relocked my phone tried the ruu exe many times didnt work..I done a backup of my nandroid but it took me back to the earlier firmware but still have the updated radio..So, I will relock it and place this on my sd card and try again..I was getting error 140 on the ruu exe
Here is the no-brainer fix for those that end up having Mainver issues, or maybe want to come back from an ICS ROM to GB and RUU and the normal methods don't work...
Go to www.scottsroms.com and hit the download section, look for Rezound and Stock Roms. Grab his boot image for the latest OTA.
Then download his "Cleanflash" utility and copy the boot.img file to that directory on your PC.
Run it and select option "2".
That restores the stock boot image and mainver right there. If you made a Nandroid of your system from before you went to ICS, boot into recovery and restore it. His tool will also install Amon Ra or CWM recovery, just like the boot image, download the one you want and copy that recovery.img to the cleanflash folder and run the tool.
I went from a completely hosed ICS install which would not allow RUU or Hbooting the PH98IMG.zip file... nothing worked, was contemplating replacing the phone, when I tried Scott's tool to push the stock boot image to the phone and then restored my Nandroid.
Worked 100% in under 5 minutes, the Nandroid Restore taking most of that time.
Hope this helps!
I'm stuck at the bootloading screen on my Rezound, and I'm lost as to what to do. I was attempting to load the new RUU on my device but obviously, something went wrong. I believe I renamed the wrong file to PH98IMG.zip and screwed something up. I have tried to push the correct RUU file through ADB, but I can't get my device to show up. Is there a way to access my sd card so I can put the correct RUU file on my device?
Micro sd > sd adapter > USB card reader.
Or put your sd card into another phone and download the correct ph98img.zip file
Thanks. I was wondering if there was a way to access the sd card from the bootloader menu, but I guess I'll have to go out and buy a sd card reader tomorrow. Now I just hope I didn't permanently mess anything up by flashing a ROM file as PH98IMG.zip.
If you can get to bootloader it is recoverable
Ok, try this, while connected to a pc. Pull out sd card & battery while in hboot. Go to fastboot and make sure you got fasboot usb showing. Unlock bootloader(unless your on eng hboot or patched jb's hboot), download AmonRA 3.15 renamed to recovery.img, then do "fastboot boot recovery.img", but before pushing enter. Replace battery and sd card.
That will get you to where you can access the external SD card with its USB mounting.
or
You have not run a RUU. There is no RUU for ICS yet. A RUU is a Rom Update UTILITY (meaning, it is in the form of an EXE file run from a PC with the phone connected; and it does quite a bit more than a simply PKxxxx.zip flashover file).
Oddly, if you actually had a RUU, it would probably solve your problem.
jdmba said:
You have not run a RUU. There is no RUU for ICS yet. A RUU is a Rom Update UTILITY (meaning, it is in the form of an EXE file run from a PC with the phone connected; and it does quite a bit more than a simply PKxxxx.zip flashover file).
Oddly, if you actually had a RUU, it would probably solve your problem.
Click to expand...
Click to collapse
It's amazing how many people do not know the difference between ruu and bootloader images.....
Sent from my ADR6425LVW using Tapatalk 2
Yup
cdexsw said:
It's amazing how many people do not know the difference between ruu and bootloader images.....
Click to expand...
Click to collapse
Dealing with one right now!
http://forum.xda-developers.com/showpost.php?p=25638449&postcount=5
jdmba said:
Dealing with one right now!
http://forum.xda-developers.com/showpost.php?p=25638449&postcount=5
Click to expand...
Click to collapse
Nice try.
PH98IMG.zip is contained within the RUU.exe....when extracted it is named Rom.zip. this file contains everything found in the PH98IMG.zip we flash in the bootloader.We just rename it it to the ph98img.zip
however, it is still an image file. It needs to be flashed, either the Utility, fastboot, or bootloader.
Without the image the Rom Updater Utility would be useless.
What ever name you want to call a ph98img...is still an image file.
But the post was good reading but still does not mean you proved a point or proved me wrong. or that it is not an image file.
Note: this post is not trying to say anyone is wrong.....
Sent from my ADR6425LVW using Tapatalk 2
cdexsw said:
Nice try.
PH98IMG.zip is contained within the RUU.exe....when extracted it is named Rom.zip. this file contains everything found in the PH98IMG.zip we flash in the bootloader.We just rename it it to the ph98img.zip
Click to expand...
Click to collapse
I was on your side!!!
Anyway, there are 3, and only 3, RUU's for the Rezound:
http://www.filefactory.com/f/c2e320ee1d5c7886
Can't seem to get anyone to understand that; but like I said, its a losing battle.
If there WERE actually a RUU, I would gladly run it, because then that would properly replace all part of my GB install with ICS. Flashing this PHxxxx.zip image, will not do so (hence the need for the "old firmware fix").
jdmba said:
I was on your side!!!
Click to expand...
Click to collapse
oops, my bad...lol. sorry. Thanks
Sent from my ADR6425LVW using Tapatalk 2
jdmba said:
If there WERE actually a RUU, I would gladly run it, because then that would properly replace all part of my GB install with ICS. Flashing this PHxxxx.zip image, will not do so (hence the need for the "old firmware fix").
Click to expand...
Click to collapse
What parts are you saying do not get replaced? I flashed the new leak yesterday specifically to upgrade from the gb firmware and it works fine without a patch. I'm running Nils ICS Business 3.4.
Just wondering.
NilsP said:
If you can get to bootloader it is recoverable
Click to expand...
Click to collapse
i am stuck in the bootloader and cant get out. adb wont see it but i can see it in device manager. i f-ed my phone up so i relocked and ran the latest GB ruu and it failed and now i am stuck in the bootloader. it does say fastboot usb. any help would be great
Figure I'd try posting here, rather than start up a new thread. I tried looking for my specific problem but couldn't find it. Anyway, new to HTC and Rezound, coming from a rooted Droid X, so I'm familiar with flashing roms. My Rezound is completely stock.
I downloaded the most current ICS leak, RUU_Vigor_3.14.605.10. I put it on the root of my sd card, renamed it, and held power and down button. The phone loads the PH98IMG.zip for a few minutes, then proceeds to checking the PH98IMG.zip for a few minutes. After this is all done, I'm on the bootloader screen. Where to go from here? I thought the phone should have automatically rebooted? I clicked fastboot, then restart, which just brings me back to GB. I'm obviously missing an easy step here. Do I go into recovery, or somewhere else?
Thanks in advance guys. I hate being the new guy, late to the party.
Seemed to have figured it out. Had to re-download the leak on a different computer, and now my phone is updating itself. Weird. Finally get my hands on ICS.
jdmba said:
I was on your side!!!
Anyway, there are 3, and only 3, RUU's for the Rezound:
http://www.filefactory.com/f/c2e320ee1d5c7886
Can't seem to get anyone to understand that; but like I said, its a losing battle.
If there WERE actually a RUU, I would gladly run it, because then that would properly replace all part of my GB install with ICS. Flashing this PHxxxx.zip image, will not do so (hence the need for the "old firmware fix").
Click to expand...
Click to collapse
I've flashed a couple PH98IMG.zips and they were for different things on my phone. one was a splashscreen and the other was an update (ICS Update to be exact). now isn't that supposed to be an RUUs job? to update the phone? there are a couple ways to update the phone, one being a new leaked stock rom through recovery, and another through hboot with a PH98IMG file.
I can't seem to get back to stock for some reason, I've googled, searched the forums used the search function in the forums followed all those steps with bootloader unlocked and relocked and still Can't get to stock. My phone details are
HTC Amaze 4g (TELUS)
Android version: 4.0.3
Recovery: 4EXT
I'm not sure what other information is needed, I tried this thread here tried both files, the first one i tried restoring from recovery, says the MD5 sums don't match so I didn't want to take the chance. The second file the .exe attempted that failed right away and after removing battery phone went back to the same way it was. tried renaming the first file to PH85IMG and relocked bootloader, the flash succeeded it seemed, but once phone loaded nothing was changed..which I found very weird. It formatted I wiped caches, fixed permissions and get back to home screen after it was all done, and my apps were all still installed and settings were exactly the same and everything. (I had the feeling I'm already on stock and that's why its not working), the whole reason I was trying to get to stock is because in order to s-off juopunutbear's tutorial, where it didn't work the troubleshooting said problem is im not stock, or! i have certain programs installed. But I just reformatted and just installed the basics, so I have nothing that would interfere as far as I know.
So How Do I Get Back To Stock?
loki9 said:
I can't seem to get back to stock for some reason, I've googled, searched the forums used the search function in the forums followed all those steps with bootloader unlocked and relocked and still Can't get to stock. My phone details are
HTC Amaze 4g (TELUS)
Android version: 4.0.3
Recovery: 4EXT
I'm not sure what other information is needed, I tried this thread here tried both files, the first one i tried restoring from recovery, says the MD5 sums don't match so I didn't want to take the chance. The second file the .exe attempted that failed right away and after removing battery phone went back to the same way it was. tried renaming the first file to PH85IMG and relocked bootloader, the flash succeeded it seemed, but once phone loaded nothing was changed..which I found very weird. It formatted I wiped caches, fixed permissions and get back to home screen after it was all done, and my apps were all still installed and settings were exactly the same and everything. (I had the feeling I'm already on stock and that's why its not working), the whole reason I was trying to get to stock is because in order to s-off juopunutbear's tutorial, where it didn't work the troubleshooting said problem is im not stock, or! i have certain programs installed. But I just reformatted and just installed the basics, so I have nothing that would interfere as far as I know.
So How Do I Get Back To Stock?
Click to expand...
Click to collapse
You just need a Telus ICS stock RUU, not gb RUU. Rename the zip rom to ph85img, not the exe file, put to your sd, relock and boot the bootloader. It will scan and ask you to update, just say yes.
you're done.
rouiz said:
You just need a Telus ICS stock RUU, not gb RUU. Rename the zip rom to ph85img, not the exe file, put to your sd, relock and boot the bootloader. It will scan and ask you to update, just say yes.
you're done.
Click to expand...
Click to collapse
I've already done that exactly how you just said it, and it worked like it went through the whole process BUT once my phone loaded up nothng changed or was different and juopunutbear didn't work still. the TELUS files in the thread i linked, the ICS one...is that not the stock ICS RUU?
loki9 said:
I've already done that exactly how you just said it, and it worked like it went through the whole process BUT once my phone loaded up nothng changed or was different and juopunutbear didn't work still. the TELUS files in the thread i linked, the ICS one...is that not the stock ICS RUU?
Click to expand...
Click to collapse
Well, I'm not with telus, but to me those look like on the air ICS and stock GB, which explain your prob :
•OTA_RUBY_ICS_35_S_TELUS_WWE_2.14.661.2-1.41.661.3_release_258801lhwl8053lp8g5hcp.zip
•RUU_Ruby_TELUS_WWE_1.41.661.3_Radio_1.08.550L.19DC _30.66.550L.08D_release_222694_signed.exe
rouiz said:
Well, I'm not with telus, but to me those look like on the air ICS and stock GB, which explain your prob :
•OTA_RUBY_ICS_35_S_TELUS_WWE_2.14.661.2-1.41.661.3_release_258801lhwl8053lp8g5hcp.zip
•RUU_Ruby_TELUS_WWE_1.41.661.3_Radio_1.08.550L.19DC _30.66.550L.08D_release_222694_signed.exe
Click to expand...
Click to collapse
Great! lol thats what I thought OTA didn't think it was RUU but thats the link i was given on another site saying it would work. Any idea where theres a stock RUU? There is the .exe but i cant change that to a zip so no clue what to do
loki9 said:
Great! lol thats what I thought OTA didn't think it was RUU but thats the link i was given on another site saying it would work. Any idea where theres a stock RUU? There is the .exe but i cant change that to a zip so no clue what to do
Click to expand...
Click to collapse
I haven't checked for the Telus one. I've the Videotron ICS RUU, but it's won't help unless you're cid free. For the .exe, you have to get the rom, not rename the .exe to .zip. Just search in your temp (%temp%), when you activate the RUU you'll see some new folders. Look for it, rename and you're done.
Maybe someone else could post a direct link.
Maybe you can directly try with the OTA to get back. boot into stock recovery, if you have the red triangle error, hold volume up and press the power button, should give you a menu, then install update from external, select the OTA RUU and install.
Try that, maybe it will solve your prob.
rouiz said:
I haven't checked for the Telus one. I've the Videotron ICS RUU, but it's won't help unless you're cid free. For the .exe, you have to get the rom, not rename the .exe to .zip. Just search in your temp (%temp%), when you activate the RUU you'll see some new folders. Look for it, rename and you're done.
Maybe someone else could post a direct link.
Maybe you can directly try with the OTA to get back. boot into stock recovery, if you have the red triangle error, hold volume up and press the power button, should give you a menu, then install update from external, select the OTA RUU and install.
Try that, maybe it will solve your prob.
Click to expand...
Click to collapse
Hmm I found the rom.zip but I can't do anything with it, just says its invalid.
where do you get the invalid message? I've extracted the rom.zip after starting the exe file, and renamed it and it worked no problem before. If I get a hold of my backup phone I'll see if I can load up a stock rom and do a backup, zip it and put it on dropbox for you. That won't be til tomorrow though, and at least that way you'll have the stock rom, one way or another
andy55 said:
where do you get the invalid message? I've extracted the rom.zip after starting the exe file, and renamed it and it worked no problem before. If I get a hold of my backup phone I'll see if I can load up a stock rom and do a backup, zip it and put it on dropbox for you. That won't be til tomorrow though, and at least that way you'll have the stock rom, one way or another
Click to expand...
Click to collapse
When I try to open it, I tried just renaming copying it to SD, it ran...but then said failed..older hboot....I believe. How would I be able to tell if I was on a stock ruu...I have a feeling I'm already stock...and that's why nothing is working...and my juopunutbear problem lies elsewhere.
did you try to flash with a stock recovery? You need a stock recovery to get the ruu to install. Did you change your hboot?
andy55 said:
did you try to flash with a stock recovery? You need a stock recovery to get the ruu to install. Did you change your hboot?
Click to expand...
Click to collapse
It's possible but im not sure what should it say?
loki9 said:
It's possible but im not sure what should it say?
Click to expand...
Click to collapse
ya im pretty much stuck cant get back to stock because my bootloader version is newer
So while trying to update to ICS my fingers were working faster than my brain (yes, it happens) and I selected a menu option while using Clockwork and, while I'm not sure, I think the option said something like, "format .. OS...something..." before I could fully read it (and stop my finger from pressing the power button), I pressed the power button.
The phone rebooted, got to the white HTC screen and stopped - stuck on the white HTC screen. I pulled the battery.
I Held down power and up-volume and got to the bootloader menu, selected recovery and Clockwork came up.
Couldn't "Recover" because it couldn't mount the SD card.
Couldn't mount the external SD card either.
Ok - tried a factory reset - Rebooted - up came the white HTC screen where it stays until I pull the battery.
I'm new at this (probably didn't need to say that, but...).
How Do I get past this point?
Is this phone agonner?
How do I load (anything) to the phone at this point?
Thanks in advance! I appreciate it.
MilesTHD said:
So while trying to update to ICS my fingers were working faster than my brain (yes, it happens) and I selected a menu option while using Clockwork and, while I'm not sure, I think the option said something like, "format .. OS...something..." before I could fully read it (and stop my finger from pressing the power button), I pressed the power button.
The phone rebooted, got to the white HTC screen and stopped - stuck on the white HTC screen. I pulled the batter.
I Held down power and up-volume and got to the bootloader menu, selected recovery and Clockwork came up.
Couldn't "Recover" because it couldn't mound the SD card.
Couldn't mound the external SD card either.
Ok - tried a factory reset - Rebooted - up came the white HTC screen where it stays until I pull the battery.
I'm new at this (probably didn't need to say that, but...).
How Do I get past this point?
Is this phone agonner?
How do I load (anything) to the phone at this point?
Thanks in advance! I appreciate it.
Click to expand...
Click to collapse
Try using adb commands from your computer to push a recovery to your phone and go from there
Sent from my ADR6425LVW using xda app-developers app
If it powers on, you're not bricked.
Are s-on or s-off?
Make sure you have a card reader for the following.
The best thing for you to do would probably to flash an RUU.
First, download the latest RUU.
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
If you are s-on with unlocked boot loader, relock it:
Make sure there is no PH98IMG.ZIP on your sdcard. Delete if there is one.
Power off phone completely with battery pull.
Plug in phone to computer with USB.
Go to the bootloader menu with vol down + power.
Select fastboot.
On your computer, run the following fastboot command (do whatever you needed to do to use fastboot):
fastboot oem lock
After that is done, time to install the RUU.
Find the RUU you downloaded and put it on your sdcard, then rename to PH98IMG.ZIP
Put sdcard back, then power on to bootloader.
It should now scan for the PH98IMG and then ask you to install it.
Follow all the instructions to install it.
After you finish this, you will be back to the stock ROM with a locked boot loader.
If either s-off or s-on locked bootloader
Sent from my HTC Rezound using Tapatalk 2
Rezound still major messed up
THANK YOU for your help, I really appreciate your response. I followed your instructions and once the PH98IMG.zip file was on the SD card I loaded bootloader and it did scan for the file, but said "no file or wrong file!" Well, the file is there so I know its not "no" file. I've tried a couple of different PH98IMG files that I found on XDA but I guess the specific file wasn't the problem.
After it gives the error message it simple goes back to the bootloader and waits.
Unlocking the bootloader and then following your instructions did result in the file being seen and, what appeared to be, the installation process beginning - however when the phone reboots for the first time it just goes quiet and never comes back up. I waited for at least 20 minutes before I decided it wasn't just a long boot process.
I"m pretty sure there is NOTHING on this phone. I've verified there's nothing on the SD card besides the PH98IMG.zip file. Assuming I've completely wiped out the OS (and it is not on the phone) is the method you've outlined the right starting point?
Thanks again, and Merry Christmas
Miles
wlmeng11 said:
If it powers on, you're not bricked.
Are s-on or s-off?
Make sure you have a card reader for the following.
The best thing for you to do would probably to flash an RUU.
First, download the latest RUU.
If you are s-on with unlocked boot loader, relock it:
Make sure there is no PH98IMG.ZIP on your sdcard. Delete if there is one.
Power off phone completely with battery pull.
Plug in phone to computer with USB.
Go to the bootloader menu with vol down + power.
Select fastboot.
On your computer, run the following fastboot command (do whatever you needed to do to use fastboot):
fastboot oem lock
After that is done, time to install the RUU.
Find the RUU you downloaded and put it on your sdcard, then rename to PH98IMG.ZIP
Put sdcard back, then power on to bootloader.
It should now scan for the PH98IMG and then ask you to install it.
Follow all the instructions to install it.
After you finish this, you will be back to the stock ROM with a locked boot loader.
If either s-off or s-on locked bootloader
Sent from my HTC Rezound using Tapatalk 2
Click to expand...
Click to collapse
MilesTHD said:
THANK YOU for your help, I really appreciate your response. I followed your instructions and once the PH98IMG.zip file was on the SD card I loaded bootloader and it did scan for the file, but said "no file or wrong file!" Well, the file is there so I know its not "no" file. I've tried a couple of different PH98IMG files that I found on XDA but I guess the specific file wasn't the problem.
After it gives the error message it simple goes back to the bootloader and waits.
Unlocking the bootloader and then following your instructions did result in the file being seen and, what appeared to be, the installation process beginning - however when the phone reboots for the first time it just goes quiet and never comes back up. I waited for at least 20 minutes before I decided it wasn't just a long boot process.
I"m pretty sure there is NOTHING on this phone. I've verified there's nothing on the SD card besides the PH98IMG.zip file. Assuming I've completely wiped out the OS (and it is not on the phone) is the method you've outlined the right starting point?
Thanks again, and Merry Christmas
Miles
Click to expand...
Click to collapse
If you are S-on and have an unlocked bootloader, you will need to relock it before attempting to flash an ruu. Once re-locked, ensure that the PH98IMG is not a zip file within a zip file which is how they are usually uploaded. Attempt to unzip the files until it will not unzip anymore. That file that won't unzip needs to be the one you rename as PH98IMG and placed on the root of your SD card. Reboot to bootloader and allow it to scan. It will ask you if you wish to proceed and you will allow it. After some time it will reboot back to bootloader to flash radios and the rest of firmware. After that process and a 2nd reboot you should he back to stock, locked, and unrooted.
Sent from my Rezound using xda premium
Also, it could be possible that your phone can't recognize the sd card so it needs to be formatted.
Sent from my HTC Rezound using Tapatalk 2
zip file contents?
Maybe I should ask what the contents of the .zip file should be? I did check the zip to make sure it wasn't a double-zip. There were two versions of the PH98IMG file i tried. One had the file (imagemate-3.60.exe) the other had the file(s) (boot.img and android-info.txt).
I did "relock" the bootloader prior to trying and it would not recognize the file. When it was unlocked it would see it, start the install process, then go quiet. So that at least tells us that the file is there and likely workable.
I can't seem to get past the "No image or wrong image" message. I've tried on 3 different cards (the original and two fresh cards) and I've checked to ensure the zip is not a zip within a zip.
IAmTheOneTheyCallNeo said:
If you are S-on and have an unlocked bootloader, you will need to relock it before attempting to flash an ruu. Once re-locked, ensure that the PH98IMG is not a zip file within a zip file which is how they are usually uploaded. Attempt to unzip the files until it will not unzip anymore. That file that won't unzip needs to be the one you rename as PH98IMG and placed on the root of your SD card. Reboot to bootloader and allow it to scan. It will ask you if you wish to proceed and you will allow it. After some time it will reboot back to bootloader to flash radios and the rest of firmware. After that process and a 2nd reboot you should he back to stock, locked, and unrooted.
Sent from my Rezound using xda premium
Click to expand...
Click to collapse
MilesTHD said:
Maybe I should ask what the contents of the .zip file should be? I did check the zip to make sure it wasn't a double-zip. There were two versions of the PH98IMG file i tried. One had the file (imagemate-3.60.exe) the other had the file(s) (boot.img and android-info.txt).
I did "relock" the bootloader prior to trying and it would not recognize the file. When it was unlocked it would see it, start the install process, then go quiet. So that at least tells us that the file is there and likely workable.
I can't seem to get past the "No image or wrong image" message. I've tried on 3 different cards (the original and two fresh cards) and I've checked to ensure the zip is not a zip within a zip.
Click to expand...
Click to collapse
You should download that file from Android Police. It should have a 'bunch' of files in it. I"m not familiar with imagemate-3.60.exe but boot.img is just the kernel. Rename the file that you download to PH98img, (as previously stated) put it on a good SD card and boot into bootloader. It should go.
How about telling us if you are s-on or s-off. I don't see where you've answered that question. Also, if it doesn't work, tell us what your bootloader screen says. That will give us some info to help you.
Merry Christmas....I've got to go to bed before Santa shows up. :laugh::laugh:
EDIT: I just downloaded the Android Police file and as I said, it has a lot of files in it. I'm not sure what you were playing with but i likely the cause of you problem. Get the right file, name it ph98img.zip, put on root of SD, boot into bootloader (you're locked, right) and let it do its thing. good luck.
MilesTHD said:
Maybe I should ask what the contents of the .zip file should be? I did check the zip to make sure it wasn't a double-zip. There were two versions of the PH98IMG file i tried. One had the file (imagemate-3.60.exe) the other had the file(s) (boot.img and android-info.txt).
I did "relock" the bootloader prior to trying and it would not recognize the file. When it was unlocked it would see it, start the install process, then go quiet. So that at least tells us that the file is there and likely workable.
I can't seem to get past the "No image or wrong image" message. I've tried on 3 different cards (the original and two fresh cards) and I've checked to ensure the zip is not a zip within a zip.
Click to expand...
Click to collapse
One thing you need to know is that a PH98IMG file can be many things. It is only the name of a file that your phone looks for to use when booted into hboot. So it can be a kernel, an entire RUU (OS), a custom recovery or ROM... basically anything. It just means that item was packed into a PH98IMG file in order to run automatically off your SD card when the phone boots.
So you need to know what the PH98IMG file is that you are using or you might flash something you don't want that can possibly cause your phone to not work properly. In your examples above one is a kernel (boot.img) and I have no idea what imagemate-3.60.exe is. It sounds like you have not had the correct file.
Here is the global RUU you should run to get you back to stock with all the latest radios and firmware:
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
You need to be locked to run it so if you are S-ON, which it sounds like you are (don't remember if you mentioned that before), you need to use fastboot from your pc to do that, just like you did when you unlocked it with this command:
fastboot oem lock
***If you are S-OFF you should be locked again from that process already. But if you are S-OFF then confirm with someone to be sure it's safe to run the RUU, there's something about not relocking if you are on a certain hboot or you can brick it or something...***
Then put the RUU on your SD card and reboot the phone. Let it run through the RUU a few times because apparently it needs to do it a few times to get all the system files. Afterwards, if you want to root again and flash a custom ROM you will need to unlock again and flash a custom recovery and reroot.
It Works!
Not that I'm going to give you all the credit, because everyone kinda chipped in - however you DID provide the ONLY correct link to exactly what I needed! LORDY there are a lot of bad links being passed around. THANK YOU Ms. Feralicious, I totally appreciate your help.
... Everyone else as well - very generous with your knowledge and time and I will always love you.
Merry Christmas! Have a safe new year as well!
Miles
feralicious said:
One thing you need to know is that a PH98IMG file can be many things. It is only the name of a file that your phone looks for to use when booted into hboot. So it can be a kernel, an entire RUU (OS), a custom recovery or ROM... basically anything. It just means that item was packed into a PH98IMG file in order to run automatically off your SD card when the phone boots.
So you need to know what the PH98IMG file is that you are using or you might flash something you don't want that can possibly cause your phone to not work properly. In your examples above one is a kernel (boot.img) and I have no idea what imagemate-3.60.exe is. It sounds like you have not had the correct file.
Here is the global RUU you should run to get you back to stock with all the latest radios and firmware:
You need to be locked to run it so if you are S-ON, which it sounds like you are (don't remember if you mentioned that before), you need to use fastboot from your pc to do that, just like you did when you unlocked it with this command:
fastboot oem lock
***If you are S-OFF you should be locked again from that process already. But if you are S-OFF then confirm with someone to be sure it's safe to run the RUU, there's something about not relocking if you are on a certain hboot or you can brick it or something...***
Then put the RUU on your SD card and reboot the phone. Let it run through the RUU a few times because apparently it needs to do it a few times to get all the system files. Afterwards, if you want to root again and flash a custom ROM you will need to unlock again and flash a custom recovery and reroot.
Click to expand...
Click to collapse
Followed these directions & update fails...Please help.
Have PH98IMG.zip on sd card.
Gets this far...
*** LOCKED ***
VIGOR PVT SHIP S-ON RL
HBOOT-2.11.0000
eMMC-boot
HBOOT
Parsing...[SD ZIP]
[1]...
...[18]
...start update?
<VOL UP>
Next to "[1] BOOTLOADER" "- Fail-PU"
And below [18]..., "Partition update fail!"
"Update Fail!"
"Press <POWER> to reboot."
It's an HTC Rezound I'm trying to get back to stock, Verizon.
Any ideas?
It's locked which means it's never been unlocked and it's s-on. A simple factory reset within the rom itself will suffice
Sent from my Rezound using xda premium
rut-row...running rezound reset from rom repeatedly ravaging me :-O
IAmTheOneTheyCallNeo said:
It's locked which means it's never been unlocked and it's s-on. A simple factory reset within the rom itself will suffice
Sent from my Rezound using xda premium
Click to expand...
Click to collapse
When running rom, ...
"RUU_VIGOR_ICS_35_S_VERIZON_WWE_3.14.605.12_Radio_RS_1.22.10.0424r_3622A_MR3_9
K_release_270509_signed.exe" ...
ends in usb error 170...
Anyone having any pointers for me will be worshiped indefinately!
Thank-You and I'm-not-worthy, in advance,
Tom
screen shots
TommyJames said:
When running rom, ...
"RUU_VIGOR_ICS_35_S_VERIZON_WWE_3.14.605.12_Radio_RS_1.22.10.0424r_3622A_MR3_9
K_release_270509_signed.exe" ...
ends in usb error 170...
Anyone having any pointers for me will be worshiped indefinately!
Thank-You and I'm-not-worthy, in advance,
Tom
Click to expand...
Click to collapse
attached error window pic.
TommyJames said:
attached error window pic.
Click to expand...
Click to collapse
Try putting the PH98IMG.ZIP on your sdcard manually.
Sent from my HTC Rezound using Tapatalk 2
TommyJames said:
When running rom, ...
"RUU_VIGOR_ICS_35_S_VERIZON_WWE_3.14.605.12_Radio_RS_1.22.10.0424r_3622A_MR3_9
K_release_270509_signed.exe" ...
ends in usb error 170...
Anyone having any pointers for me will be worshiped indefinately!
Thank-You and I'm-not-worthy, in advance,
Tom
Click to expand...
Click to collapse
Not sure what you're trying to do there, run an RUU?
Did you try a factory reset from the settings of the phone as Neo suggested?
Settings > Storage > Factory data reset
But back up anything you want to save such as pics, settings, etc... it will wipe everything.
same thing happens...
TommyJames said:
Have PH98IMG.zip on sd card.
Gets this far...
*** LOCKED ***
VIGOR PVT SHIP S-ON RL
HBOOT-2.11.0000
eMMC-boot
HBOOT
Parsing...[SD ZIP]
[1]...
...[18]
...start update?
<VOL UP>
Next to "[1] BOOTLOADER" "- Fail-PU"
And below [18]..., "Partition update fail!"
"Update Fail!"
"Press <POWER> to reboot."
It's an HTC Rezound I'm trying to get back to stock, Verizon.
Any ideas?
Click to expand...
Click to collapse
same thing happens...
TommyJames said:
same thing happens...
Click to expand...
Click to collapse
You still needing help?
Where did you get the PH...img file you are using? Are you sure it's an RUU?
Did you ever try resetting to factory settings within the phone? You don't need to RUU for that, check a few posts up on where to find the setting.
[Q] Getting "Error [140]: Bootloader Version Error" when I try to downgrade my HBoot
Okiedoke. So, I've got a little experience with the Evo 3D, but my last one was shoddily done and I don't think I ever even attained S-OFF on it, so when I had to get mine replaced by Sprint, I figured I'd follow a guide and do this thing right.
I first followed the HTC method of unlocking my bootloader and rooting the device, and then installed TWRM. I was using my phone for about a week before I just today decided I had enough time to look at these instructions and follow them. I successfully used this PG86IMG file (from this thread) to brick my device, followed the instructions from the original thread up to 27, and then realized I might have a problem on my hands. I can't boot my phone into the OS anymore (I get a sudden slowdown and then freeze of the boot animation before it restarts itself), but I can still get into the bootloader and Fastboot. So, I figured, why not just run the 1.13 RUU EXE in Fastboot? So I tried, but every time I try to run an RUU EXE (I've tried several, both 1.13 and 2.17 versions), after the RUU pushes the file to the phone and checks signatures I get error 140. I saw that Unknownforce said here that these instructions are "extremely dated" and to use the new ones in his newer thread, but I'm not sure where to pick up.
In short, I would love it if someone could recognize what the next step I need to take is. Ask me for any further information I haven't provided, I'll be more than glad to help you guys help me!
I'm having a similar issue, the only difference between our issues being that I get Error 131: CUSTOMER ID ERROR. Still working on how to fix it.
Macadamia Daze said:
I'm having a similar issue, the only difference between our issues being that I get Error 131: CUSTOMER ID ERROR. Still working on how to fix it.
Click to expand...
Click to collapse
Well this probably won't help with my issue, but this guy seems to have found a solution for yours.
Macadamia Daze said:
I'm having a similar issue, the only difference between our issues being that I get Error 131: CUSTOMER ID ERROR. Still working on how to fix it.
Click to expand...
Click to collapse
Put the PG86IMG(.zip) on the sdcard and boot to bootloader and update that way. The ruu exe checks the Cid, the bootloader flash doesn't.
Sent from my SPH-L720 using xda app-developers app
Unknownforce said:
Put the PG86IMG(.zip) on the sdcard and boot to bootloader and update that way. The ruu exe checks the Cid, the bootloader flash doesn't.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
I tried this two different ways:
Got a 1.13 PG86IMG ZIP from Shipped ROMs, renamed to PG86IMG and put on my SD card, but my phone didn't want anything to do with it (it would load and check it, but then kick me back out to the main bootloader screen). Then I downloaded a 1.13 RUU EXE and extracted the "rom" file from it, renamed and slapped on card. Phone loads and checks correctly, but then returns the "Main version is older!" error.
DavisJ3608 said:
I tried this two different ways:
Got a 1.13 PG86IMG ZIP from Shipped ROMs, renamed to PG86IMG and put on my SD card, but my phone didn't want anything to do with it (it would load and check it, but then kick me back out to the main bootloader screen). Then I downloaded a 1.13 RUU EXE and extracted the "rom" file from it, renamed and slapped on card. Phone loads and checks correctly, but then returns the "Main version is older!" error.
Click to expand...
Click to collapse
Then your misc version didn't downgrade as it should have. Go to the main thread and flash the firmware zip file that's listed there, it will put you up to 1.58 hboot, then start that process from scratch.
Unknownforce said:
Then your misc version didn't downgrade as it should have. Go to the main thread and flash the firmware zip file that's listed there, it will put you up to 1.58 hboot, then start that process from scratch.
Click to expand...
Click to collapse
Okiedoke. Just to verify (sorry for being thick), when you say "Main Thread" you're talking about this one, right? I ask because the only firmware I see there is for Virgin, and I'd rather keep Sprint firmware on my phone (unless it really, truly doesn't change anything but the name).
Also, your method requires launching a Linux distro, yes? Is it OK if it's off a live USB, like the Ubuntu installer OS? For some reason I can't get my machine to cooperate when I try to install a permanent Linux OS (something to do with UEFI settings, I think).
DavisJ3608 said:
Okiedoke. Just to verify (sorry for being thick), when you say "Main Thread" you're talking about this one, right? I ask because the only firmware I see there is for Virgin, and I'd rather keep Sprint firmware on my phone (unless it really, truly doesn't change anything but the name).
Also, your method requires launching a Linux distro, yes? Is it OK if it's off a live USB, like the Ubuntu installer OS? For some reason I can't get my machine to cooperate when I try to install a permanent Linux OS (something to do with UEFI settings, I think).
Click to expand...
Click to collapse
That thread yes, but I mean the PG86IMG file from the downgrade section there, use that to update the hboot and firmware, then start that section from scratch.
And yes any linux will work USB or not.
Unknownforce said:
That thread yes, but I mean the PG86IMG file from the downgrade section there, use that to update the hboot and firmware, then start that section from scratch.
And yes any linux will work USB or not.
Click to expand...
Click to collapse
I actually ended up pulling an old laptop out from storage and putting Ubuntu on that so I can have an actual workstation. I ran the PG86IMG you mentioned, which got my phone back up and running with HBOOT 1.58. Then I followed all of your instructions to the letter, down to where you say to run the 1.13 RUU EXE. I tried running that on Ubuntu using WINE, but I kept getting an error. Then I tried running it on Windows 8, but I can't seem to get the EXE to detect my phone is connected. Then I even tried running the RUU in a WinXP virtual machine, but I can't seem to get that to work either. I then tried simply using the 1.13 ZIP as PG86IMG, but I'm getting the same error where after it loads and scans the file, it kicks me out to the main bootloader screen with no warnings or error messages.
At this point, what would be the better option? Should I attempt Revolutionary and get S-Off, then redo the instructions? Or should I do something else? Do I even need to install the 1.13 RUU? I assume I do, because my phone is unusable if I don't...
DavisJ3608 said:
I actually ended up pulling an old laptop out from storage and putting Ubuntu on that so I can have an actual workstation. I ran the PG86IMG you mentioned, which got my phone back up and running with HBOOT 1.58. Then I followed all of your instructions to the letter, down to where you say to run the 1.13 RUU EXE. I tried running that on Ubuntu using WINE, but I kept getting an error. Then I tried running it on Windows 8, but I can't seem to get the EXE to detect my phone is connected. Then I even tried running the RUU in a WinXP virtual machine, but I can't seem to get that to work either. I then tried simply using the 1.13 ZIP as PG86IMG, but I'm getting the same error where after it loads and scans the file, it kicks me out to the main bootloader screen with no warnings or error messages.
At this point, what would be the better option? Should I attempt Revolutionary and get S-Off, then redo the instructions? Or should I do something else? Do I even need to install the 1.13 RUU? I assume I do, because my phone is unusable if I don't...
Click to expand...
Click to collapse
If the bootloader is not saying anything about the zip file it's not a valid signed zip. Find another copy of it or extract it from the ruu exe. Run the exe and open up the temp folder and search for rom.zip then rename to PG86IMG(.zip) and put on sdcard. Then try again. You need special drivers for windows 8, which is why that didn't work, the other two are emulated versions of Windows, and don't have the proprietary drivers to work properly either. So unless you have access to another windows pc that isn't 8, your only option is to get the sdcard the correct file.
Sent from my SPH-L720 using xda app-developers app
DavisJ3608 said:
Well this probably won't help with my issue, but this guy seems to have found a solution for yours.
Click to expand...
Click to collapse
No dice. I can't change my CID without getting an error, presumably because I can't HTCDev unlock (when I get to the final step, I get success on fastboot but never the prompt on the phone).
Unknownforce said:
Put the PG86IMG(.zip) on the sdcard and boot to bootloader and update that way. The ruu exe checks the Cid, the bootloader flash doesn't.
Click to expand...
Click to collapse
Hboot just checked my CID and kicked me out.
Macadamia Daze said:
No dice. I can't change my CID without getting an error, presumably because I can't HTCDev unlock (when I get to the final step, I get success on fastboot but never the prompt on the phone).
Hboot just checked my CID and kicked me out.
Click to expand...
Click to collapse
Uhhh... Pretty sure that is to super cid a gsm phone
I don't think it's meant for CDMA!!
Unknownforce said:
If the bootloader is not saying anything about the zip file it's not a valid signed zip. Find another copy of it or extract it from the ruu exe. Run the exe and open up the temp folder and search for rom.zip then rename to PG86IMG(.zip) and put on sdcard. Then try again. You need special drivers for windows 8, which is why that didn't work, the other two are emulated versions of Windows, and don't have the proprietary drivers to work properly either. So unless you have access to another windows pc that isn't 8, your only option is to get the sdcard the correct file.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Oh my god, I feel like a dumbass for not pulling the rom from the EXE before saying anything o.o
Anywho, I pushed the 1.13 PG86IMG correctly, then ran Revolutionary on Ubuntu, and now my phone's S-Off and 1.40! Thanks so much! Hand to god, when I get paid I'm sending you beer money.
DavisJ3608 said:
Oh my god, I feel like a dumbass for not pulling the rom from the EXE before saying anything o.o
Anywho, I pushed the 1.13 PG86IMG correctly, then ran Revolutionary on Ubuntu, and now my phone's S-Off and 1.40! Thanks so much! Hand to god, when I get paid I'm sending you beer money.
Click to expand...
Click to collapse
Haha, glad it worked :highfive: