Can't enable HSPA - Galaxy S III Q&A, Help & Troubleshooting

Hi, today I followed a guide that was supposed to disable fast dormancy but instead it disabled HSPA+ completely. The method was the on where you dialed *#192328640# and then after a few options you Released R99 which turns HSPA off. The problem is I can't seem to figure out how to turn it back on! I've tried every option in the menu but still no luck,
Any help?
Thanks

rj.camargo said:
Hi, today I followed a guide that was supposed to disable fast dormancy but instead it disabled HSPA+ completely. The method was the on where you dialed *#192328640# and then after a few options you Released R99 which turns HSPA off. The problem is I can't seem to figure out how to turn it back on! I've tried every option in the menu but still no luck,
Any help?
Thanks
Click to expand...
Click to collapse
First enter service menu via secret code
*#197328640#
In the menu, choose the following items sequentially:
1 (debug screen)
8 (phone control)
3 (nas control)
5 (rcc HSPA control)
And then you will find the well known menu to change the HSDPA settings, as on Galaxy S and SII.
you can follow this thread: http://forum.xda-developers.com/showthread.php?t=1693529
i hope thjs helps

saywhatt said:
First enter service menu via secret code
*#197328640#
In the menu, choose the following items sequentially:
1 (debug screen)
8 (phone control)
3 (nas control)
5 (rcc HSPA control)
And then you will find the well known menu to change the HSDPA settings, as on Galaxy S and SII.
Click to expand...
Click to collapse
I've tried this but the options to change revision won't do anything (I tried release 5 and release 6)

try wiping cache via recovery..
if not, flash another modem.. if it still persists, call your network service
Sent from my GT-I9300 using xda premium

saywhatt said:
try wiping cache via recovery..
if not, flash another modem.. if it still persists, call your network service
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Do you know where can i find other modems?

rj.camargo said:
Do you know where can i find other modems?
Click to expand...
Click to collapse
There is a threat in general which lists all available modems: search for 'modern i9300'
Sent from my GT-I9300 using xda app-developers app

that menu works weirdly,
1 - deactivate the data connection
2 - when you are in the option rcc HSPA control release 6 , press the both options like a crazy... lol, then keep pressed the first option and then the second one (it's obvious... I am not sure how that menu works xD)
3 - In the normal configuration menu, in the menu where you can change between GSM,WCDMA, select GSM, then WCDMA and at least GSM/WCDMA (automatic mode) <- the default option.
4 - reboot
That is how I get back H+
I am pretty sure this is not related to the modem version or the fast dormancy thing...
Regards
srryforthebadenglishxD

Use this app, network, check if you can change to wcdma
http://db.tt/sFcTG7TF
Sent from my GT-I9300 using xda app-developers app

SLver said:
that menu works weirdly,
1 - deactivate the data connection
2 - when you are in the option rcc HSPA control release 6 , press the both options like a crazy... lol, then keep pressed the first option and then the second one (it's obvious... I am not sure how that menu works xD)
3 - In the normal configuration menu, in the menu where you can change between GSM,WCDMA, select GSM, then WCDMA and at least GSM/WCDMA (automatic mode) <- the default option.
4 - reboot
That is how I get back H+
I am pretty sure this is not related to the modem version or the fast dormancy thing...
Regards
srryforthebadenglishxD
Click to expand...
Click to collapse
I tried this but it didn't work, can you be more specific in the instructions? Lol what do you mean like crazy! how many times or for how long. Thanks

kofiaa said:
Use this app, network, check if you can change to wcdma
http://db.tt/sFcTG7TF
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Tried this, it shows only H sometimes (no H+) but when I start using the phone it switches to 3G =(

Ur H+ thing depends on your network/signal. Call ur network provider
Sent from my GT-I9300 using xda premium

saywhatt said:
Ur H+ thing depends on your network/signal. Call ur network provider
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I know, I had H+ two days ago but when I tried the procedure stated in the OP it was gone! I can't seem to make it appear again, only 3g.

Well.. i suggest (if the H+ is really important to you) to flash back to a stock firmware and do a factory reset
I hope this helps
Sent from my GT-I9300 using xda premium

saywhatt said:
Well.. i suggest (if the H+ is really important to you) to flash back to a stock firmware and do a factory reset
I hope this helps
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I already did that but still no luck. It's driving me crazy!!!
Any other ideas?

Related

J16 - manually use 2G gone?

Hi all, I updated my phone via kies mini to j16, now I cannot find the 2G option. I need this because I cannot make or receive calls while I'm in my basement unless I'm on 2G. Anyone having trouble finding it? Have they completely removed this?
Sent from my SGH-T959 using XDA App
I believe it's just be reworded. The option you're looking for is "GSM only" under Settings > Wireless and Network > Mobile Networks > Network Mode
Give it a try.
Xplicitelem3nt said:
Hi all, I updated my phone via kies mini to j16, now I cannot find the 2G option. I need this because I cannot make or receive calls while I'm in my basement unless I'm on 2G. Anyone having trouble finding it? Have they completely removed this?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
It's J EYE 6, not J ONE 6. Anyway...
Not removed, improved IMO but not terribly user friendly I suppose.
Under "Mobile Network Settings", tap "Network Mode".
AUTO = 2G/3G
GSM Only = 2G only
WCDMA Only = 3G only
Hope it helps...
EDIT: Oops, it looks like I missed being post #2 by ~ 2 Minutes.
Ahh thanks
Sent from my SGH-T959 using XDA App

How do I select 3g only?

Hey folksI need help. Is there a way to select just the 3g bands?
Here's where I'm stuck:
Dail *#*#4636#*#*
Click phone information
Go down to preferred network type
Select 'WCDMA only '
Now what?
Sent from my MB860 using XDA App
If you did that, you are done!
Just press the home screen and you should be set for 3g only. This screen do not have any save option. As soon you get out of the screen your settings will be saved.
If you are with AT&T, you are still on 2G anyway!
i just add the INFO code as a contact on the phone, that way i can switch between preferred 3g (gsm auto prl), forced 3g (wcdma only) and forced 2g (gsm only) at will. by dialing INFO and just touch the resolved contact.
Whats the benefit?
It's not working for me. I'll keep trying though! Thanks
Francis can you post a step by step guide on how to do this?
Sent from my MB860 using XDA App
WiredPirate said:
Whats the benefit?
Click to expand...
Click to collapse
Where I live has spotty coverage. Doing anything on EDGE is so painfully slow, I open have to flip airplane mode on then off so I can at least browse XDA properly
Sent from my MB860 using XDA App

Only 3g mode in ics?

Is there is any way to activate only 3g mode in ics... I am using icysnap..!
Sent from my LG-P500 using xda premium
Yeah.. But we have that only in cm7 not in cm9 for your kind info.. I am asking about cm9....mr. Awesome.. Lolzzz
Sent from my LG-P500 using xda premium
Cool down guys! I am meditating . LOL
use the toggle on status bar to switch to only 3g mod in cm9
or dial in phone *#*#4636#*#* go to phone info and switch to whatever network type you want or like fd said go to settings > more > mobile network > network mode and choose wcdma only
Christian Nothing said:
or dial in phone *#*#4636#*#* go to phone info and switch to whatever network type you want or like fd said go to settings > more > mobile network > network mode and choose wcdma only
Click to expand...
Click to collapse
there is no network mode in ics
fd is wrong
androidisfuture said:
there is no network mode in ics
fd is wrong
Click to expand...
Click to collapse
+1
@OP: I think you can just leave "Use only 2G networks unchecked" and you should be good to go. But I might be wrong
I have it on p-one that is miui on cm9.
3g preferred, 2g only, 3g only.
I remember also cm9 has it but maybe I'm wrong.
Usually I switch between 2g and 3gpreferred, never used 3g only.
if your rom doesn't have network mode you can use that code or the toggle from statusbar any method have the same result
Christian Nothing said:
or dial in phone *#*#4636#*#* go to phone info and switch to whatever network type you want or like fd said go to settings > more > mobile network > network mode and choose wcdma only
Click to expand...
Click to collapse
@OP Christian Nothing is right. Try that!!
FD1999 said:
WTF?!? It is there! Settings>More>Network>Network mode
Even on my fu*king slow Neo V running ICS...
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
There isn't even a "Network" option under "more". The closest thing to "network" that is there is "mobile networks" and even under that there is no "network mode" option.
sweetnsour said:
There isn't even a "Network" option under "more". The closest thing to "network" that is there is "mobile networks" and even under that there is no "network mode" option.
Click to expand...
Click to collapse
totally agree with sweet sour
the only thing is can be done is *#*#4636#*#*
+1 to sweetnsour..... Only that no help us...
Sent from my LG-P500 using xda premium
How come u all ignor my post. Wtf!
Go to settings-system-notification drawer-widget buttons- tick network mod and scroll down to adjust network mod settings. If i made a mistake in it then do use yr precious common sense to figure it out
kssood said:
How come u all ignor my post. Wtf!
Go to settings-system-notification drawer-widget buttons- tick network mod and scroll down to adjust network mod settings. If i made a mistake in it then do use yr precious common sense to figure it out
Click to expand...
Click to collapse
calm down man
cool

[Q] moto g not forcing to use ONLY WCDMA

hello. i have a moto g 16gb version. actually i want to use only 3g at my location. but my phone is set to preferred 3g mode which means that it uses 3g only when 3g signals are good. so there is no option of using only wcdma or 3g. also tried the phone testing app but no gain. plz solve this.
Settings>more>mobile networks>network mode and change it
(it's in ics menu, don't know about kitkat)
Sent from my A11 using Tapatalk
amit694 said:
hello. i have a moto g 16gb version. actually i want to use only 3g at my location. but my phone is set to preferred 3g mode which means that it uses 3g only when 3g signals are good. so there is no option of using only wcdma or 3g. also tried the phone testing app but no gain. plz solve this.
Click to expand...
Click to collapse
Try this.
In the dialer, press *#*#4636#*#*,
choose phone information,
change WCDMA only.
Turn the radio off and on again.
This may help.
Good luck.
Sithu Htun said:
Try this.
In the dialer, press *#*#4636#*#*,
choose phone information,
change WCDMA only.
Turn the radio off and on again.
This may help.
Good luck.
Click to expand...
Click to collapse
i have done this metod. when i choose any option there it automatically changes to gsm only mode.
So check that did you tick "Use only 2G to save battery" option in mobile network setting.
Sent from my G610-U00 using xda app-developers app
Sithu Htun said:
So check that did you tick "Use only 2G to save battery" option in mobile network setting.
Sent from my G610-U00 using xda app-developers app
Click to expand...
Click to collapse
actually this option is not there in my phones setting. and i have said that my phone sometimes go to 3g mode when i move to better 3g network coverage.
arnabbiswasalsodeep said:
Settings>more>mobile networks>network mode and change it
(it's in ics menu, don't know about kitkat)
Sent from my A11 using Tapatalk
Click to expand...
Click to collapse
i have changed the mode to 3g . but no help.

Cm 13 Always Switching to Automatically choose available network

Hello i recently switched to Cm13 shapshot version and when i manually select the Network i wanna be registered to it always switches back to the 'Automatically choose available network' which slows down my network speed... Anyone know what could be wrong????
Sent from my KIW-L24 using XDA-Developers mobile app
Can you make your question a little bit simpler?! I couldn't dully understand it
CronaMell said:
Can you make your question a little bit simpler?! I couldn't dully understand it
Click to expand...
Click to collapse
Lol ok...I am using the KIw-L24 and cyanogen 13 Os...But in the option where i choose what network to register to they are two options...either the network chooses automatically or i choose manually...and i preferably use the setting where i use manually but it still reverts back to being chosen automatically by the network... Mostly the network chooses 2G speeds for me when I'd rather a minimum of 3G...Do you get me now????
Sent from my KIW-L24 using XDA-Developers mobile app
Milupi said:
Lol ok...I am using the KIw-L24 and cyanogen 13 Os...But in the option where i choose what network to register to they are two options...either the network chooses automatically or i choose manually...and i preferably use the setting where i use manually but it still reverts back to being chosen automatically by the network... Mostly the network chooses 2G speeds for me when I'd rather a minimum of 3G...Do you get me now????
Click to expand...
Click to collapse
Yes, just go to settings--->cellular networks---> preferred network type, then select 3G.
I hope this helps you
CronaMell said:
Yes, just go to settings--->cellular networks---> preferred network type, then select 3G.
I hope this helps you
Click to expand...
Click to collapse
Yeah tried that already but still ironically it sometimes drops to 2G
Sent from my KIW-L24 using XDA-Developers mobile app
Milupi said:
Yeah tried that already but still ironically it sometimes drops to 2G
Click to expand...
Click to collapse
I don't what to say know but, maybe another CM13 build have this issue fixed.
I hope you find a solution.
Ok think i found a way...
Thanks anyway
Sent from my KIW-L24 using XDA-Developers mobile app
My pleasure to help you

Categories

Resources