I have a problem with restoring my apps from a CWM backup from SD-Ext on my HTC Sensation. I've used ROM Toolbox Pro to restore the apps from my CWM Backup, but the ones on the SD-Ext won't be restored. It says it's successful, but none of the apps are there. It's about 70 apps. I've also tried to restore them with Titanium Backup, but then, the whole app freezes. I've also tried to restore it via a recovery. I'm currently using 4ext 1.0.0.5 recovery, but CWM wouldnæt either restore them. Any suggestions to how I can restore them?
Sounds like it is corrupted to me, in which case it won't work.
Related
I get tired installing everything with titanium backup. If I use a nandroid backup can I go from ROM's such as comm romm 1.3, to Evil fascination without use of titanium backup?
Would I just go into recovery and go to advanced restore and restore just the data? Would this screw up the whole ROM or would I get my system settings and apps back?
Another quick question, and off topic:
I have update.zip on my sd card from flashing CWM many moons ago. I'm on version 3 of CWM, do I still need update.zip on my phone?
You can get rid of the update.zip if you're using CWM 3.x (or even most 2.5.x). If you aren't applying update.zip to get into CWM, then the update.zip is useless.
As for restoring data from an nandroid backup, you could possibly do that, but you'd have to restore only data, and even then you may run into problems. It's likely safest to use Titanium Backup, and only backup non-system apps/data. I just did a restore today via Titanium Backup, and it only took like 5 minutes, and I didn't see any hassle with it. Did you purchase Titanium Backup, or are you using the free version? Using the paid version may make restoring a little more painless for you.
imnuts said:
You can get rid of the update.zip if you're using CWM 3.x (or even most 2.5.x). If you aren't applying update.zip to get into CWM, then the update.zip is useless.
As for restoring data from an nandroid backup, you could possibly do that, but you'd have to restore only data, and even then you may run into problems. It's likely safest to use Titanium Backup, and only backup non-system apps/data. I just did a restore today via Titanium Backup, and it only took like 5 minutes, and I didn't see any hassle with it. Did you purchase Titanium Backup, or are you using the free version? Using the paid version may make restoring a little more painless for you.
Click to expand...
Click to collapse
Thanks. Appreciate your advice.
I'm curious about this. Maybe someone can enlighten me.
Lets say that I'm on stock 2.2, rooted. I do a nandroid backup. Then I allow the upgrade for 2.2.2. Of course I lose root.
Will a nandroid restore, restore root, or will I have to root again?
A full nandroid restore will restore everything - the system and data - and you will be right back where you were, on 2.2 and rooted.
maltloaf said:
A full nandroid restore will restore everything - the system and data - and you will be right back where you were, on 2.2 and rooted.
Click to expand...
Click to collapse
Ahh, okay.
So to confirm that I understand you correctly...
...the 2.2.2 update won't hold after the nandroid restore? I'll be back to 2.2, as it was before the (2.2.2) update?
If you just wanna backup and restore your apps, use Titanium Backup (it's free on the Market).
Nandroid backs up your entire phone. When you restore a nandroid backup your phone will be exactly like it was when you made the backup. Restoring a nandroid backup is used to recover from a crash or to revert to a previous ROM.
After a ROM change I will set up my accounts, root if needed and do any other basic setup stuff and then, before installing any apps, do a nandroid backup. I can then go back to a "fresh install" if I want to. I also do a nandroid each weekly to capture the state of my phone.
Backing up apps and restoring them across different ROMs may or may not work for you. When I have tried this with Titanium Backup I had many force closes and ended up reinstalling everything from the market. Others have had success. I have read the MyBackup pro does better, but most suggest that you just backup and restore data not the app itself.
I have not tried backing up my apps to Google, which you can do in later versions of Android. Go to Privacy in the setting menu and then to Backup and restore. There are boxes for data backup and automatic restore you can check. maybe someone who has used this can comment on how well it works.
If your nandroid backups hang up at "backing up firstboot" get the latest version of StreakMod Recovery.
marvin02 said:
Backing up apps and restoring them across different ROMs may or may not work for you. When I have tried this with Titanium Backup I had many force closes and ended up reinstalling everything from the market. Others have had success. I have read the MyBackup pro does better, but most suggest that you just backup and restore data not the app itself.
Click to expand...
Click to collapse
After installing a fresh ROM and rooting my device, the first thing I do is install Busybox. Then, with Titanium Backup I do Restore Apps Only, then reboot my device. I never get any FC's with this restore process.
Thanks!
Thank you everyone. I appreciate the info.
I've used Titanium BU, and have busybox installed too.
It was just a matter of if after an update (OTA), and restore with Nandroid, would root still be in place.
I totally understand what you guys are saying now.
I've also been using MyBackup to see how it compares to Titanium. So far so good.
~X
I prefer mybackup root to titanium. It's far more user friendly and more automated (in the free version). As for nandroids, I always take a backup before doing any system changes (hacks or rom updates) so I can roll back to a known good system if needs be.
BTW - it is a good idea to copy your ROM backups to another device, just in case your SD card dies. I copy mine to one of my desktop computers and to a USB drive. I usually back up my entire SD card, except my music folders, every couple of weeks.
Where does Nandroid put the backups so I can rename them and save off phone?
mine (from Streakmod recovery) are in /sdcard/rom_backup
StreakMod recovery puts the backups on the SD Card in a folder named rom_backup.
Each backup is in a sub-folder of it's own and uses a date-time format for the folder name. I rename the folders with a meaningful name by just pre-pending to the name. So my last backup is named BB351-2011-06-18-02.41.04. The following files are created:
.android_secure.img
boot.img
cache.img
data.img
firstboot.img
recovery.img
system.img
nandroid.md5
the md5 file is a text file that contains the md5 sums for the other files. This file is used to verify the other files when they are restored.
Hello all.
I had Litening ROM 4.2 installed on my SGS2, then I wanted to try Cyanogen Mod, and first made backup with CWM. Now when I try to restore backup, it restores it, but when I boot phone, everything is messed up, apps that I installed dont work, etc... It even shows me that first-time screen, to set up connections, time etc. Can anyone give me some hints what am I doing wrong please ? Thanks.
I even tried to install Litening ROM from scratch, deleted cache & davlik cache, and installed it with Odin, but when I try to install any application, after install it works fine for couple seconds then it shows me error and that "force close" dialog... And it happens with every app I try to install.
I have also tried to install Frankesteins Stock ROM that I found here, then install Litening ROM, but got same errors again...
Same problem here. After a restore, I get the first time screen. No apps, no data, default settings. Please help!
This just happened to me as well.....
Version of can? There's deffo something odd with some of the cwm versions going about. Also I notice that v5 doesn't like yo restore v4 backups. And vice versa
Sent from my GT-I9100 using Tapatalk
Backup created with ver 4.x.
Both ver 5.x & 4.x failed to restore system data. Tried installing ROM and wiping everything, reflashing CWM, but still the same problem.....
CWM4 and CWM5 use different formats for the backups. That's why backups of those are not interchangable, you have to restore with the CWM you made the backup with.
Also, don't change the dir names of the backups, I did it once and the backup woudln't restore anymore, changed name back to original one and it worked again.
The OP also sounds like only the /system partition was restored for some reason.
Try a clean format of /system, /data and /cache before the restore.
Were apps installed to sdcard?
Just to be sure, you can try advanced restore, and restore *.img one by one.
Just posting to point out that it seems to have affected me too. I made a backup, but restoring just restores the ROM without my data.
HellcatDroid said:
Also, don't change the dir names of the backups, I did it once and the backup woudln't restore anymore, changed name back to original one and it worked again.
Click to expand...
Click to collapse
thanx man thats my problem
CWM is great for restoring the actual rom. But I have found with a large app load (I have 3-400 at any given point) it struggles.
Reconfiguring is common place, personally I use CWM for roms and titanium for apps these days.
You can coax CWM by restoring bits at a time rebooting then doing the next piece.
Sent from my GT-I9100 using XDA App
Hello!
I have CWM Touch Recovery v6.0.3.1. A couple of hours ago, I made a NANDroid backup before flashin a new ROM. When I attempted to use NANDroid backup manager to restore my apps and data, the app said I had no apps in the backup. Upon reviewing the files CWM created, I discovered that it created several data.ext4.tar files. Is there a way to combine these so I can use the Nandroid backup manager to restore my apps. I've managed to restore call logs, text messages and wifi data but my apps are important too
Thanks in advance for the help ^-^
EDIT: I do realise I could probably use CWM for restoring but I want to restore specific apps and not the data. (I.e the recently updated hotmail app)
Plus, restoring with CWM flashes data that is incompatible with the new ROM.
full back up or partial back up
SeraphSephiroth said:
Hello!
I have CWM Touch Recovery v6.0.3.1. A couple of hours ago, I made a NANDroid backup before flashin a new ROM. When I attempted to use NANDroid backup manager to restore my apps and data, the app said I had no apps in the backup. Upon reviewing the files CWM created, I discovered that it created several data.ext4.tar files. Is there a way to combine these so I can use the Nandroid backup manager to restore my apps. I've managed to restore call logs, text messages and wifi data but my apps are important too
Thanks in advance for the help ^-^
EDIT: I do realise I could probably use CWM for restoring but I want to restore specific apps and not the data. (I.e the recently updated hotmail app)
Plus, restoring with CWM flashes data that is incompatible with the new ROM.
Click to expand...
Click to collapse
As far as i know Nandroid backup is used to restore previously backed up ROM+installed applications+app data . If you jus want to back up some application, just use something like "Titanium Backup", it workes great.
:good: If it helped you, Just hit the THANKS :highfive:
Titanium, Backup (TiBu) has an option for extract from nandroid backup in its menu. why dont you try that if u have TiBu installed ..
Thank you but I solved my problen a while ago.
Sent from my SHV-E210S using Tapatalk 2
SeraphSephiroth said:
Hello!
I have CWM Touch Recovery v6.0.3.1. A couple of hours ago, I made a NANDroid backup before flashin a new ROM. When I attempted to use NANDroid backup manager to restore my apps and data, the app said I had no apps in the backup. Upon reviewing the files CWM created, I discovered that it created several data.ext4.tar files. Is there a way to combine these so I can use the Nandroid backup manager to restore my apps. I've managed to restore call logs, text messages and wifi data but my apps are important too
Thanks in advance for the help ^-^
EDIT: I do realise I could probably use CWM for restoring but I want to restore specific apps and not the data. (I.e the recently updated hotmail app)
Plus, restoring with CWM flashes data that is incompatible with the new ROM.
Click to expand...
Click to collapse
A nandroid backup is used to backup the system,boot,recovery... In case your phone is bricked but if yout want to backup apps just use an application like titanium backup
Dear fellows,
I hope this is a right place to ask my question here. If not please please tell me and head me over to an other thread where this has been discussed.
I've rooted the S4 mini successfully (thanks to arco68). Right after the rooting process and installing ARCO's CWM I backed up the stock 4.4.2 rom in any case. I did a factory reset and flashed CM 11 also successfully and everything was good. After a week I wanted to go back to stock. So I restored the backup I made previously. Everything went out good, but now the whole system is inconsistent and instable. I have problems with the WiFi, SD card problems and so on.
What am I did wrong? Any advise is very welcome
I will flash stock via Odin tomorrow and root it again. But I want to avoid this process in future
Thanks
Been having some issues with my SGS3 and charging, using JellyBam (v7, fairly old, so thought I would start fresh on latest version).
Using CWM5, I did a backup. Factory reset + wipe cache + wipe dalvik cache, then flashed the new ROM. Figured out what I needed to for the charging issues, but forgot I didn't to a titanium backup with all my apps, and more importantly the app data.
I can confirm looking in the CWM data.ext4.tar that the data I want is in there.
So I backed up my new flash setup, restored the previous backup, thinking I would do a titanium backup and get everything setup in my newly flashed ROM. After restore (I did another factory reset + cache + dalvik wipe first), it presents me with the google login wizard, and it seems to have remembered some of my apps but not others. So the restore seems to not have worked.
If I try reinstalling the app it gives me the 'Unknown error code during application install: "-24"' error
Any ideas how I can get the restore to work correctly?
OR some way from the fresh install (providing that restore works too) to grab the app data from my data.ext4.tar and move it into my working install? I tried just copying the file into /data/data but that didnt seem to do the trick
Old CWM
Flash the firmware you made a cwm backup of restore via CWM .
Flash Philz recovery and make a new backup .
Now get 'error while restoring /data'. Seems to be an issue on CWM5 for >2GB backups.
Going to try flashing Philz recovery and try again
Nope no joy. Is there any way I can extract data from a nandroid backup?
As I'm only really fussed about a handful of apps so could do it manually
5 355586
poppahorse said:
Nope no joy. Is there any way I can extract data from a nandroid backup?
As I'm only really fussed about a handful of apps so could do it manually
Click to expand...
Click to collapse
maybe there is the way, but is better if you make a update of your CWM,... 6.0.3 or 0.4 touch... by the way I always use two mores apps for backing up data from my SIII ... one for sms, contacts ecc.. to extSDcard "Super backup pro" and the other app for backup data apps "Ultimate backup pro"