So, I have scoured the forums and have not yet found a solution to my current problem.
I was able to originally root my phone using the moto-fastboot method that has been posted on these threads several times to root my phone. Upon rooting I installed some standard applications to remove bloatware and toy with some of the hardware settings. I worked great. I got a little bit too confident and decided to put a custom rom on it without properly backing up(I thought I did).
So I got stuck into bootloop. Upon searching your extremely handy and helpful forums I found a way to install a new sbf and unbrick my phone using RSD lite. The operating system in now working, but it will not make or receive phone calls or data.
Possibly pertinent information:
System version: 45.0.43.MB867.ACG-nTelos.en.US (this is probably way off)
Model: Milestone X2
Android: 2.3.6
Baseband: N_03..13.56P
Kernel Version: 2.6.32.9-00011-gbc368b9 [email protected] #2
Build Number: 45.0.43
ERI: Version 5
PRL: Version 21100
My Phone number: 000-000-5761 (obviously not correct)
MIN: 0000005761
MEID: A000002C5D4811
Network: nTelos (I have no idea where that network even is)
Signal Strength: -101dBm 0 asu
Mobile network type: CDMA -1xRTT
Service State: In Service
Mobile Network State: Disconnected
I tried again to root my phone to try to put a custom rom on it, but when I try the moto-fastboot method upon entering the command thru abd shell /preinstall/su I get the error "Permission Denied". I have tried the superoneclick method, Pete's method, z4 root, and droid 3 easy root. I am at quite a loss here on what to do next.
Does anyone know of a way I could maybe use the default android recovery to install the proper rom for my phone and where to get the proper rom?
Alternatively, does anyone know where I can get the proper sbf file for the CSpire Motorolla Milestone X2?
I have been searching for a few days, so please don't get mad if I have overlooked a thread. I was very hesitant about posting this thread because I am not a very active member of your forums and I wanted to make sure I searched a lot before asking the same question over again.
I am not saying the problem I am having is completely unique, but I have not seen anyone with my problem. Since my phone is currently useless as a phone I am willing to try a lot more methods.
Update: I have successfully rooted my phone again using this method:
http://forum.xda-developers.com/show....php?t=1823112
Given that I now have root access are there any new options to get my phone to work?
How to change you system number
I have some more updates on my current status. I have received a warranty phone. I will not mail it for a few more days, so if anyone can inform me on how to pull some import files from it for their personal use I will . It is rooted now using the method mentioned above. Upon activating the phone with a rep from the company I got some more possibly useful information. I hope this helps others.
I haven't seen this anywhere, but if you need to change you system phone number do the following:
1. dial ##626 press call
2. enter 000000 for the SPC password
3. MIN is the number for your local network
4. IMSI will fill automatically
5. MDN is your personal phone number
6. CDMA system ID I have not information on this
nateman7097 said:
I have some more updates on my current status. I have received a warranty phone. I will not mail it for a few more days, so if anyone can inform me on how to pull some import files from it for their personal use I will . It is rooted now using the method mentioned above. Upon activating the phone with a rep from the company I got some more possibly useful information. I hope this helps others.
I haven't seen this anywhere, but if you need to change you system phone number do the following:
1. dial ##626 press call
2. enter 000000 for the SPC password
3. MIN is the number for your local network
4. IMSI will fill automatically
5. MDN is your personal phone number
6. CDMA system ID I have not information on this
Click to expand...
Click to collapse
Yoo I have the SAME EXACT ISSUE. How did you get your fixed??? I have tried everything and this seems impossible
Related
Good for everyone!!
Sorry for my google's traductor english
I mention my case to see if with the help of all I can restore the phone.
After spending hours tinkering with the phone, turn it into a paperweight and reliving me realize I can not find a way to make the phone work properly.
The phone lights up, root access and the latest Cyanogen rom installed with the corresponding recovery.
The problem is that once you put on the sim that puts you never recognized. It asks me the pin and when I try to enter the dialpad to put a sequence to know, for example, if you have a lock on (step I made when the phone had the movistar rom) or simply to know the imei, it is trying to call and not open the menus.
I do not know if discovered and can serve as something that if I go into Settings - About Phone ANRO I have the version 2.3.5, 2.6.35.7 Kernel Version-perf-CL591990root @ dell126 # 1 and build number GINGERBREAD.XWKS3 . What baffles me and maybe come around the problem is that in the field puts Base Band Version Unknown. The same if I go into state gives me no information network, imei, network status, etc..
I tried also to urge a new modem, but not for that.
Has anyone had or has the same problem?
I appreciate your help in trying to help solve the problem.
If you need any additional information, be alert to tell you.
Greetings!
Hi!, I'm new here i'd like to say thank you in advance.
Here is the story. My Uncle just brought me a Samung Stratosphere G4 Verizon(I'm out of the States). It came with a T-mobile miniSim, but it has network lock.
First it had the lastest update FF1,
When followed some tutorials, here and at XDA, and manage to flash it: this is the current Info:
Hardware Version: I405.05
Model: SCH-I405
Firmware: 2.3.5
Base band: I405.05.V.FF1
SCH-I405.FF1
Kernel: 2.6.35.7.EI2
Compilation: SCH-I405.EI2
IMEI: 99XXXXXXXXXXXX (So its working)
The phone is rooted, when i got to the efs folder y didnt find any nv_data.bin, so i found an application nv_datarepair so now it appears, and with some tools it said it unlocked.
But it still doesn't reconize any Sim. but before i do anything with him (flash or sim unlock) if in the dialer i type: *#06# it doesnt show anything, not even if i press the call button(it show network not available) and no code work there. since I got the phone and even now.
Do you have any idea?, I'm about to flash it again to an FF1 version I found here, but even I get to do it right I need to get the simunlock.
I hope I explained myself enought.
Again, thank you in advance. take care.
Edit: I just installed FF1, but it says it need activation, and I can't... I used TESTMODE, to bypass but ask on every reboot, I noticed that even if I buy an unlock code i won't be able to use it since no hash number can be used...
Edit 2: I managed to bypass activation with Titanium and/or editing build.prop, but now i know that I need to change something to make the phone global capable.
Is there any way to flash baseband to get the phone global?
Hey I've been working for the past 36 hours to recover from what I'm guessing to be an ERI deletion. After rooting and flashing a CM10.1 rom, I lost 4g and got stuck in roaming, and have been reflashing with this and re-rooting with this over and over. I have tried other n7105 compatible ROMs, but no matter what I do I get stuck without CDMA (I can get data and I receive texts but I cannot call out or send texts). I am currently back to stock with root access. My texts will not send and when I try to place a call it says "Mobile network not available" however I am able to receive texts. I was hoping to get lucky with the reset code used for this same problem on GS3's, but it doesn't seem to do anything for our phones. Does anyone know of a similar code for our phones?
Under the Settings> About phone> Status> these are the network related things I see:
Network: Verizon Wireless (correct)
Mobile network type: LTE:14 (?)
Service state: Out of service
Roaming: Not roaming
Mobile network state: Disconnected
My phone number is correct
ERI version: Not available
IMEI matches the one on the back of the phone
IMEISV: 00
All of this is when my phone is in global network mode. When I switch it to CDMA/LTE it loses the network and eventually prompts me over and over to switch to global until I concede.
Is it as simple as calling customer service and asking for them to put it back in service? Or did I delete something in the flashing process?
What does your phone say for ERI?
Mine does not have a listing for ERI Version under status.
ERI version 5
turn on debugging, make sure you are rooted.
run these commands in cmd prompt or a linux terminal with phone plugged in:
adb shell
su
am broadcast -a android.provider.Telephony.SECRET_CODE -d android_secret_code://HIDDENMENUENABLE
You should see a hidden menu appear on your phone, click to enable the hidden menu options, then run:
am broadcast -a android.provider.Telephony.SECRET_CODE -d android_secret_code://IOTHIDDENMENU
another menu will appear, select the last option (rtn), then select reset. if it asks for a passcode its 000000
And I'm just curious where you got a cm10.1 rom for our phones?
I flashed the rooted stock rom and now my phoen does not pick up signal
HELLO I NEED HELP
I have the verizon note 2 and i flashed the factory stock rooted rom root66_VZW_stock_system.tar.md5
and now my imei is unknown every time i try to flash the original factory stock rom with odin, it always fail at installing modem. But when i flash the same rooted stock rom that got me in the trouble in the first place, it always installs but then that rom dont pick up any signal. I dont care about my data at this point , I just want my phone to work again
please help
mjatta1983 said:
HELLO I NEED HELP
exact same problem but i was trying to recover from bricked state x'(
I have the verizon note 2 and i flashed the factory stock rooted rom root66_VZW_stock_system.tar.md5
and now my imei is unknown every time i try to flash the original factory stock rom with odin, it always fail at installing modem. But when i flash the same rooted stock rom that got me in the trouble in the first place, it always installs but then that rom dont pick up any signal. I dont care about my data at this point , I just want my phone to work again
please help
Click to expand...
Click to collapse
I have the exact same problem and i cannot find any rom md5 tar file that will work on it in odin, this kinda sucks anyone that could help me that would be awsome. PLEASE!
Hi XDA ,
Am new in the Forum & First of all thanks to all of you for helping the forum and people. I'm having difficulties and I cant seem to find the way to fix this(its been 2 weeks)
My problem is the following: I have a Samsung Galaxy Note 3 details:
software version: N900PVPUBMI3
hardware version N900P.00
Status: network: Digital roaming
mobile network type CDMA-AxRTT
Android 4.4.2
KERNEL:[email protected]#1
A friend bought me this phone and called my carrier METROPCS and made them set up the phone so I could use it. they asked him for imei and sim number. He was able to use the phone and 4GLTE(he was doing this to verify it was unlocked) later on he gave me the phone and I had to do the same procedure he did but first I did a factory data reset.
After it I wasn't able to set it up again.
I've noticed that APN SETTINGS has disappeared from the menu, cant search for networks, when I load IMEI it no longer shows the imei but it shows MEID B0000000 and besides all of this I have a message that says SIM CARD INVALID.(but the sim card works perfectly on my other phone)
I will all my life appreciate if you help me with this matter please!
PS. phone is rooted as far as I know(root check on Google play store said it was)
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
XDAGeorge305 said:
Hi XDA ,
Am new in the Forum & First of all thanks to all of you for helping the forum and people. I'm having difficulties and I cant seem to find the way to fix this(its been 2 weeks)
My problem is the following: I have a Samsung Galaxy Note 3 details:
software version: N900PVPUBMI3
hardware version N900P.00
Status: network: Digital roaming
mobile network type CDMA-AxRTT
Android 4.4.2
KERNEL:[email protected]#1
A friend bought me this phone and called my carrier METROPCS and made them set up the phone so I could use it. they asked him for imei and sim number. He was able to use the phone and 4GLTE(he was doing this to verify it was unlocked) later on he gave me the phone and I had to do the same procedure he did but first I did a factory data reset.
After it I wasn't able to set it up again.
I've noticed that APN SETTINGS has disappeared from the menu, cant search for networks, when I load IMEI it no longer shows the imei but it shows MEID B0000000 and besides all of this I have a message that says SIM CARD INVALID.(but the sim card works perfectly on my other phone)
I will all my life appreciate if you help me with this matter please!
PS. phone is rooted as far as I know(root check on Google play store said it was)
Click to expand...
Click to collapse
You might try installing this app it find/gives all the hidden info on your device http://forum.xda-developers.com/not.../app-one-click-hotspot-enabler-menus-t2816159 it will give you APN's MEID AND IMEI . All you have to do is download to your PC, it my download as a zip file. Just use 7zip and rename it to an apk, then copy and paste it to your internal sd card via your charging cable. Then click on apk and install. Enjoy !!!
BTW your MEID is on a label under the battery !!!
jimzweb1 said:
You might try installing this app it find/gives all the hidden info on your device http://forum.xda-developers.com/not.../app-one-click-hotspot-enabler-menus-t2816159 it will give you APN's MEID AND IMEI . All you have to do is download to your PC, it my download as a zip file. Just use 7zip and rename it to an apk, then copy and paste it to your internal sd card via your charging cable. Then click on apk and install. Enjoy !!!
BTW your MEID is on a label under the battery !!!
Click to expand...
Click to collapse
Hi Jim/XDA
I'm still not able to connect to the network. Regarding the IMEI on the back part i know its there however what im saying is that im not able to see my imei through command when i dial *#06#
i as well had this errors today when i woke up:
: LTE:ESM-x EMM-14(ive seen this error when this issue started but it dissapeared and it came back know)
data roaming: you have lost data connectivity because you left your home network with data roaming turned off.
On mobile networks i remember i use to be able to select many(GSM,CDMA,etc) now in network mode i only see 2 options LTE/CDMA,CDMA. Currently LTE/CDMA is selected and if you just look at the network mode option without actually opening it it shows CDMA/LTE/EVDO.
Also when i opened the SCRTN it shows on black screen.
I tried to do some minor changes on Galaxy tools like the SIM UICC UNLOCK all mps,sales,default code on XAS. Factory & keystring ON. MSL/SPC show 222222.
After i did SIM UICC UNLOCK and restarted phone know took away all errors but i see the signal bars faded out and with a little red x on top of it. I've read the manual but im still wondering if there might still be things to set on a particular way that are not specified on it Can you please help me set this up properly?
XDAGeorge305 said:
Hi Jim/XDA
I'm still not able to connect to the network. Regarding the IMEI on the back part i know its there however what im saying is that im not able to see my imei through command when i dial *#06#
i as well had this errors today when i woke up:
: LTE:ESM-x EMM-14(ive seen this error when this issue started but it dissapeared and it came back know)
data roaming: you have lost data connectivity because you left your home network with data roaming turned off.
On mobile networks i remember i use to be able to select many(GSM,CDMA,etc) now in network mode i only see 2 options LTE/CDMA,CDMA. Currently LTE/CDMA is selected and if you just look at the network mode option without actually opening it it shows CDMA/LTE/EVDO.
Also when i opened the SCRTN it shows on black screen.
I tried to do some minor changes on Galaxy tools like the SIM UICC UNLOCK all mps,sales,default code on XAS. Factory & keystring ON. MSL/SPC show 222222.
After i did SIM UICC UNLOCK and restarted phone know took away all errors but i see the signal bars faded out and with a little red x on top of it. I've read the manual but im still wondering if there might still be things to set on a particular way that are not specified on it Can you please help me set this up properly?
Click to expand...
Click to collapse
Is this a Sprint variant? If so, you shouldn't have factory reset the phone. It looked like the phone was previously flashed to MetroPCS and by resetting the phone, it removed all the carrier data.
You will have to reflash the phone to get it working again.
nature954 said:
Is this a Sprint variant? If so, you shouldn't have factory reset the phone. It looked like the phone was previously flashed to MetroPCS and by resetting the phone, it removed all the carrier data.
You will have to reflash the phone to get it working again.
Click to expand...
Click to collapse
Is there a tutorial i could follow here ?
I greatly appreciate your help,
Regards
George
Hey guys, for those who need to edit an APN (Access Point Names), there is a little secret.
Go Settings, and scroll down the list. You will find a search box. Type there Access Piont Names and here it is.
The steps above are neccesary, since APN setting is hidden.
Hi all,
Alright so this is going to be a long post. So I recently flashed my phone to the U1 firmware, I currently have an unrooted Verizon Unlocked Samsung S9+. I wanted to switch phone carriers over to Visible (subsidiary of Verizon), here are the order of events that occurred:
1. Visible's website says that my device in not compatible using their IMEI checker, there is a solution that was found on reddit about flashing the device on the U1 firmware.
2. I flashed the device on the U1 firmware using Odin and the Visible SIM card worked as expected. No issues with the flash
3. Data/Texts etc.. are all working as expected. Except for Voicemail.
When I try to check my Voicemail, it is acting as if it's still on the Verizon Voicemail system. It says "Welcome to the message management system, please enter your mailbox number". No one can leave me a VM either because of this. I tried several different combinations of numbers, including my full 10 digit cell number and last 4, to which it says "XXX is not a valid mailbox number", which would be because my number is no longer active on Verizon, so it's unable to access it. Which makes sense. The Visible Customer Care team tried the following:
1. Provisioning my VM multiple times
2. Take out SIM card, turn phone off for 1 min, insert SIM card again, and toggle airplane mode for 30 seconds
3. Reset network settings
After numerous days of troubleshooting with them, eventually they said it was because my device isn't compatible, ok, I can't argue with that. I have not seen anyone else experiencing this issue that had flashed their phone to U1 firmware.
After trying all of this with them, I eventually factory reset my device, hoping that might do something. That still did not work.
My questions is, is there something I missed with flashing the U1 firmware? Why is it still using Verizon's VM system even though I flashed it to U1? Is there any way to fix this? Any help is greatly appreciated, and please don't hesitate if you need any other information.
bornxawkward said:
Hi all,
Alright so this is going to be a long post. So I recently flashed my phone to the U1 firmware, I currently have an unrooted Verizon Unlocked Samsung S9+. I wanted to switch phone carriers over to Visible (subsidiary of Verizon), here are the order of events that occurred:
1. Visible's website says that my device in not compatible using their IMEI checker, there is a solution that was found on reddit about flashing the device on the U1 firmware.
2. I flashed the device on the U1 firmware using Odin and the Visible SIM card worked as expected. No issues with the flash
3. Data/Texts etc.. are all working as expected. Except for Voicemail.
When I try to check my Voicemail, it is acting as if it's still on the Verizon Voicemail system. It says "Welcome to the message management system, please enter your mailbox number". No one can leave me a VM either because of this. I tried several different combinations of numbers, including my full 10 digit cell number and last 4, to which it says "XXX is not a valid mailbox number", which would be because my number is no longer active on Verizon, so it's unable to access it. Which makes sense. The Visible Customer Care team tried the following:
1. Provisioning my VM multiple times
2. Take out SIM card, turn phone off for 1 min, insert SIM card again, and toggle airplane mode for 30 seconds
3. Reset network settings
After numerous days of troubleshooting with them, eventually they said it was because my device isn't compatible, ok, I can't argue with that. I have not seen anyone else experiencing this issue that had flashed their phone to U1 firmware.
After trying all of this with them, I eventually factory reset my device, hoping that might do something. That still did not work.
My questions is, is there something I missed with flashing the U1 firmware? Why is it still using Verizon's VM system even though I flashed it to U1? Is there any way to fix this? Any help is greatly appreciated, and please don't hesitate if you need any other information.
Click to expand...
Click to collapse
Please check your voice mail settings in your phone app. See my screenshots.
There you should select the correct service provider and the Visible mailbox number.