I want to know that can i flash GT-I9100 ICS firmware on GT-I9100P downloaded from sam firmware???
faiqmasood said:
I want to know that can i flash GT-I9100 ICS firmware on GT-I9100P downloaded from sam firmware???
Click to expand...
Click to collapse
Yes, You can!
Sent from my GT-I9100 using Tapatalk 2
Jokesy said:
Yes, You can!
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
but sir when i try to do that odin stucks on hidden.img and flash fails
What are you trying to flash? As far as I know you can't flash hidden.img with odin. You could use heimdal. And the difference between gt-i9100 and gt-i9100p is that the p version has a nfc chip.
Sent from my GT-I9100 using xda app-developers app
You can but if you're Stuck... Thats cos of faulty Cable...
I think you'll lost your NFC Features if you flash i9100 FW
Peace
Hit Thanks & It will Disappear
Sent from S II Running Fully Modified Official ICS 4.0.4
Next Device: Upcoming Nexus
Omaxe said:
You can but if you're Stuck... Thats cos of faulty Cable...
I think you'll lost your NFC Features if you flash i9100 FW
I recently flashed GT i9100 gingerbread on gti9100p that works fine but when i try ics it is stuck on hidden.img and then phone says
software upgrade problem?? can u plz help i think this is not a cable problem
Click to expand...
Click to collapse
I flashed GT-i9100P with Gt-I9100 GB 2.3.5 can i now update it via kies :good:
faiqmasood said:
I flashed GT-i9100P with Gt-I9100 GB 2.3.5 can i now update it via kies :good:
Click to expand...
Click to collapse
Yeah. You can also upgrade via Odin (much faster)
Happy Independence Day!
Jokesy said:
Yeah. You can also upgrade via Odin (much faster)
Happy Independence Day!
Click to expand...
Click to collapse
sir now i have checked that i have eMMc brick bug can i flash ics 4.0.3
faiqmasood said:
sir now i have checked that i have eMMc brick bug can i flash ics 4.0.3
Click to expand...
Click to collapse
the 'eMMc brick bug' exsists only with stock android v4.0.4 firmwares that to with their kernels ma8. Your safe with v4.0.3 though, hence u can flash v4.0.3 without any issue of 'eMMc brick bug' for sure
sun90 said:
the 'emmc brick bug' exsists only with stock android v4.0.4 firmwares that to with their kernels ma8. Your safe with v4.0.3 though, hence u can flash v4.0.3 without any issue of 'emmc brick bug' for sure
Click to expand...
Click to collapse
it means that its also safe to flash 4.0.4 xxlph without any damage?
Sun90 said:
the 'eMMc brick bug' exsists only with stock android v4.0.4 firmwares that to with their kernels ma8. Your safe with v4.0.3 though, hence u can flash v4.0.3 without any issue of 'eMMc brick bug' for sure
Click to expand...
Click to collapse
It means that i can also flash 4.0.4 XXLPH
Now i tried to flash ics 4.0.3 but it stuck on factory fs.img and i then tried to flash gingerbread 2.3.5 and now phone is working again
but why i cant update to ics???
Related
Since it have official update ics, but i think my phone had root so i cant install it. Anyone pls provide a solution.. Many thanks
Version : 2.3.6
Base Version : I9100GDKJ2
Kernel Version 2.6.35.7-g7b57e17-dirty-Lucifr_1.60uv-200Mhz
Flash your stock 2.3.6 xwlc2 stock rom simply via odin. Or if u want a faster method, just go to privacy and hit factory reset. It will be as good as new. Backup your data before doing it though as you will loose data.
Thank if i helped mate. Hf
Sent from my GT-I9100G using XDA
-.- juz flash the official stock rom via odin dude
Sent from my GT-I9100G using xda premium
Do i need pit file to flash i9100g stock rom?
tom cats jr said:
Do i need pit file to flash i9100g stock rom?
Click to expand...
Click to collapse
1. No
2. Just flash the official update via Odin. Download the firmware on sammobile: www.sammobile.com/firmware/
Swyped from my Galaxy SII
hi everyone
Apologize for my Weak english syntax
Whether there is a stable ROM for Galaxy S2 GTI9100 XXLQ5 4.0.4 ??
Take 9100XLWPT. Unbranded
Sent from my GT-I9100 using xda app-developers app
Dimple101 said:
Take 9100XLWPT. Unbranded
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
the 9100XLWPT rom compatible with rom XXLQ5?
All 4.0.4 ROMs for i9100 are leaked and their kernels contain eMMC_CAP_ERASE hardbrick bug.
przemcio510 said:
All 4.0.4 ROMs for i9100 are leaked and their kernels contain eMMC_CAP_ERASE hardbrick bug.
Click to expand...
Click to collapse
for this reason i must be change my android version from 4.0.4 to 4.0.3 then install 4.0.3 stable rom ?
Hello Guys!...
I have a samsung galaxy s2 gt-i9100
here my specs
Android: 4.0.3
Basedband version: I9100XXPLS
I would like to know how to upgrade to android 4.0.4
thanks for your help!...
Download ROM from sammobile.com and flash with Odin.
Stileth said:
Download ROM from sammobile.com and flash with Odin.
Click to expand...
Click to collapse
+1
Sent from my GT-I9100 using xda premium
Stileth said:
Download ROM from sammobile.com and flash with Odin.
Click to expand...
Click to collapse
Hello...
i can use any version?
because i can't find my version in sammobile.com i think thats the problem
Erickun said:
Hello...
i can use any version?
because i can't find my version in sammobile.com i think thats the problem
Click to expand...
Click to collapse
Basically yes, any version. I would pick either XWLPT or XXLQB. Just be careful with 4.0.4 ROM if you have insane chip as you can brick your phone when performing certain operations. Its advised to flash another secure kernel.
Stileth said:
Basically yes, any version. I would pick either XWLPT or XXLQB. Just be careful with 4.0.4 ROM if you have insane chip as you can brick your phone when performing certain operations. Its advised to flash another secure kernel.
Click to expand...
Click to collapse
Thanks for your help!... I going to try... :good:
hi everybody can any one please tell me that why does kies say that your device does not support firmware upgration by kies I am on stock ics rom and I upgraded from gingerbread to ics by kies so whats the problem now?
Sent from my GT-I9100G using xda premium
You might try to uninstall KIES, reboot PC, and the reinstall KIES again.
Sometimes it behaves weird because it's crappy stuff IMHO :cyclops:
I have already done that but it still says the same thing
Sent from my GT-I9100G using xda premium
noraizrox said:
hi everybody can any one please tell me that why does kies say that your device does not support firmware upgration by kies I am on stock ics rom and I upgraded from gingerbread to ics by kies so whats the problem now?
Sent from my GT-I9100G using xda premium
Click to expand...
Click to collapse
Because kies is a piece of Sh*t, maybe
Jokesy said:
Because kies is a piece of Sh*t, maybe
Click to expand...
Click to collapse
If you are on custom rom then kies might say that..happened to me once when i was on custom..i switched back to stock and it detected the phone perfectly..
noraizrox said:
hi everybody can any one please tell me that why does kies say that your device does not support firmware upgration by kies I am on stock ics rom and I upgraded from gingerbread to ics by kies so whats the problem now?
Sent from my GT-I9100G using xda premium
Click to expand...
Click to collapse
Ok.
Dial *#1234#, and post everything you see here. I suspect your CSC is unknown
Swyped from my Galaxy SII
Jokesy said:
Ok.
Dial *#1234#, and post everything you see here. I suspect your CSC is unknown
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Sent from my GT-I9100G using xda premium
havs2006 said:
If you are on custom rom then kies might say that..happened to me once when i was on custom..i switched back to stock and it detected the phone perfectly..
Click to expand...
Click to collapse
It detects the phone perfectly and even lets me backup but software upgration is not supported by kies
Sent from my GT-I9100G using xda premium
CSC must be seen by Kies. Check what version it see in () at the and of the line with current firmware version information.
If it is (XXX) than it is unknown. U must know that current firmware must match to any stock firmware 'composition' (correct PDA, CSC and PHONE). You also must have stock kernel installed.
i9.0.1.3k galaxy imperator
SirKunon said:
CSC must be seen by Kies. Check what version it see in () at the and of the line with current firmware version information.
If it is (XXX) than it is unknown. U must know that current firmware must match to any stock firmware 'composition' (correct PDA, CSC and PHONE). You also must have stock kernel installed.
i9.0.1.3k galaxy imperator
Click to expand...
Click to collapse
I am on stock ics rom and rooted
Sent from my GT-I9100G using xda premium
i am beginer on samsung galaxy s2 (4.0.4) and i want to root it, can you please help me.
you will find a screenshot for my version android
majodo said:
i am beginer on samsung galaxy s2 (4.0.4) and i want to root it, can you please help me.
you will find a screenshot for my version android
Click to expand...
Click to collapse
There's lots of guides on rooting you should always search first.
One thing: downgrade to 4.0.3 before doing anything.
Sent from my potato running a potato.
preseodymium said:
There's lots of guides on rooting you should always search first.
One thing: downgrade to 4.0.3 before doing anything.
Sent from my potato running a potato.
Click to expand...
Click to collapse
Thank your for your reply.
yes i found a lot off guides for different version for android that's why i am confused.
1. can you please suggest me a detailled one for my version:
GT-I9100
4.0.4
I9100XXlQ6
3.0.15-1060868
[email protected]#3
IMM76D.JPLPJ
2. how can i downgrade to 4.0.3
Download 4.0.3 from sammobile and flash through Odin. Then flash Siyah or Dorimanx kernel.
Sent from my potato running a potato.
You should spend a bit of time researching before you attempt anything.If you dont then youll be back on here whingeing about bootloop or Odin doesnt work....or bricked.
What is the point of telling you to flash a rooted kernel via Odin if youve not read the tutorials.
Or root,then flash a safe kernel using stock recovery>cwm.
And at the moment you are on firmware that could lead to a bricked phone if you do the wrong thing.
Sent from my GT-N7000 using xda premium
preseodymium said:
There's lots of guides on rooting you should always search first.
One thing: downgrade to 4.0.3 before doing anything.
Sent from my potato running a potato.
Click to expand...
Click to collapse
preseodymium said:
Download 4.0.3 from sammobile and flash through Odin. Then flash Siyah or Dorimanx kernel.
Sent from my potato running a potato.
Click to expand...
Click to collapse
I did not find 4.0.3 for GT I9100 , any help
http://www.sammobile.com/firmware/?page=3&model=GT-I9100&pcode=XSA&os=1&type=1#firmware
Is it that hard? I just took another region for demonstration purposes only.
P.S theunderling I like your reaction lol
Sent from my potato running a potato.
Is it that hard? I just took another region for demonstration purposes only.
P.S theunderling I like your reaction lol
Sent from my potato running a potato.[/QUOTE]
thx a lot, i was serching with my contry name, that's why i did not find it.
can i choose any 4.0.3 randomly ?
Yes.
Sent from my potato running a potato.
preseodymium said:
http://www.sammobile.com/firmware/?page=3&model=GT-I9100&pcode=XSA&os=1&type=1#firmware
Is it that hard? I just took another region for demonstration purposes only.
P.S theunderling I like your reaction lol
Sent from my potato running a potato.
Click to expand...
Click to collapse
Lol.
It looks like his firmware is for Arabic....
Sent from my GT-N7000 using xda premium
theunderling said:
Lol.
It looks like his firmware is for Arabic....
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Hi, it's me again
now that i have I9100XWLPY_I9100NEELP6_NEE.zip how can i downgread from 4.0.4 to 4.0.3, i suppose that i must use odin ??
majodo said:
Hi, it's me again
now that i have I9100XWLPY_I9100NEELP6_NEE.zip how can i downgread from 4.0.4 to 4.0.3, i suppose that i must use odin ??
Click to expand...
Click to collapse
Please search the forums there are many guides on how to do this.
Sent from my potato running a potato.
Just out of curiosity, why should he downgrade to 4.0.3?
Just asking because I rooted my 4.0.4 with Siyah and it's working fine.
dayus9 said:
Just out of curiosity, why should he downgrade to 4.0.3?
Just asking because I rooted my 4.0.4 with Siyah and it's working fine.
Click to expand...
Click to collapse
In case you missed it the 1st time
(see below)
theunderling said:
And at the moment you are on firmware that could lead to a bricked phone if you do the wrong thing.
Click to expand...
Click to collapse
Sent from my GT-I9100 using xda premium
preseodymium said:
Please search the forums there are many guides on how to do this.
Sent from my potato running a potato.
Click to expand...
Click to collapse
OK , thx i will search
majodo said:
OK , thx i will search
Click to expand...
Click to collapse
Hi,
please your help : since i downgrade to 4.0.3 my sgs2 is too slow and show me a message "le precessus androis.process.core s'est arreté"
i had install an official rom 4.0.3 whith odin as you tell me
majodo said:
Hi,
please your help : since i downgrade to 4.0.3 my sgs2 is too slow and show me a message "le precessus androis.process.core s'est arreté"
i had install an official rom 4.0.3 whith odin as you tell me
Click to expand...
Click to collapse
Just factory reset the phone and it would be fine ... if it still gives u problem..just flash the firmware again ... u can either use CF root by chainfire or philz kernel ..make sure to use same kernel file as u have on ur device and ur phone will be rooted ... if u need more help , just reply to the thread
Sent from my GT-I9100 using Tapatalk 2
iNCEPTiON2010 said:
Just factory reset the phone and it would be fine ... if it still gives u problem..just flash the firmware again ... u can either use CF root by chainfire or philz kernel ..make sure to use same kernel file as u have on ur device and ur phone will be rooted ... if u need more help , just reply to the thread
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Thx a lot iNCEPTiON2010, it's resolved my phone is Ok after the factory reset
now i am on 4.0.3. can i use SiyahKernel S2-v5.0.1 to root my phone now ?