Eee Pad Transformer Prime TF201 Firmware: V10.1.2.15 Only for WW SKU is posted on the ASUS site for those that couldn't do the OTA
re1ic said:
Eee Pad Transformer Prime TF201 Firmware: V10.1.2.15 Only for WW SKU is posted on the ASUS site for those that couldn't do the OTA
Click to expand...
Click to collapse
got it but how do you install onto prime, tried using the installer but no luck, any guide on this?
sharps said:
got it but how do you install onto prime, tried using the installer but no luck, any guide on this?
Click to expand...
Click to collapse
Should be able to extract the file and copy to Micro SD card. Put in the Micro SD Slot and it should show a prompt that says update is available.
Just went to http://support.asus.com/download.aspx?SLanguage=en&m=Eee+Pad+Transformer+Prime+TF201 nothing there, where did you find it?
cenonmin said:
Should be able to extract the file and copy to Micro SD card. Put in the Micro SD Slot and it should show a prompt that says update is available.
Just went to http://support.asus.com/download.aspx?SLanguage=en&m=Eee+Pad+Transformer+Prime+TF201 nothing there, where did you find it?
Click to expand...
Click to collapse
I just clicked on the link you posted and it's there. You can always get it from here :laugh: http://forum.xda-developers.com/showthread.php?t=1429873
They have all 3 (WW, US & TW) on there FTP site. As soon as US & TW sync up, I will put them up.
Thanks, it wasn't showing on the FTP site before. Had been checking it all morning. Downloading the US version now.
Wheres muh kernel source~!
ive put file on microsd card still no joy? what am i doing wrong? help, unzipped ...i can see the 2 files blob and meta.
sharps said:
ive put file on microsd card still no joy? what am i doing wrong? help, unzipped ...i can see the 2 files blob and meta.
Click to expand...
Click to collapse
unzip and put the new zip file on sdcard. That is when you unzip it there is a new zip file unpacked. just use that on sdcard
msfguard said:
Wheres muh kernel source~!
Click to expand...
Click to collapse
They just upped it
Is everyone getting extremely slow speeds on the download?
re1ic said:
Eee Pad Transformer Prime TF201 Firmware: V10.1.2.15 Only for WW SKU is posted on the ASUS site for those that couldn't do the OTA
Click to expand...
Click to collapse
Thanks. I download and upgraded. Everything work fine. :good:
ok feeling a noob...i d/l the update from asus, im ww, rooted. there was a asus installer exe that did installed and didnt do much!
the i got the WW_epad_10_4_2_15_UpdateLauncher and unzipped, i ve trided it on microsd on pad and also sd card on keyboard with pad and also put in root of asus, nothing opening, last night it did show update through "check for updates" on tablet but got the red dead droind triangle halfway through.
doulble help! thanks for the replys so far....
my current firmware version is IML74K.WW_epad-9.4.2.28-20120525
hardware and firmware wise I'm stock... haven't messed with any root or unlock or anything.
and I just downloaded
WW_epad_10_4_2_15_UpdateLauncher.zip from Asus site
have I downloaded the right file?
where exactly do I put this update file to upgrade my tablet to JB?
thanks.
prmd142 said:
my current firmware version is IML74K.WW_epad-9.4.2.28-20120525
hardware and firmware wise I'm stock... haven't messed with any root or unlock or anything.
and I just downloaded
WW_epad_10_4_2_15_UpdateLauncher.zip from Asus site
have I downloaded the right file?
where exactly do I put this update file to upgrade my tablet to JB?
thanks.
Click to expand...
Click to collapse
external sd card.
put it into root of external SD card and just restart?
prmd142 said:
put it into root of external SD card and just restart?
Click to expand...
Click to collapse
yep, a notificiation should pop up and you must click it.
Make sure you get the full download, I've been downloading it for awhile now. Says I've got like 5 hours left, and yeah it's slow as hell. It's no longer showing up on the FTP site either. This is the second time I've tried to download it so if your DL doesn't match 312MB or whatever it is you didn't get the whole thing. All you should have to do is extract the zip to the root of your micro SD card. I don't think it will work while plugged into your keyboard but I could be wrong. It should automatically see that there is an update for your device and install.
*Edit 2nd Download failed and now unable to access it again since it's not listed anymore. Back to waiting. But the WW version is still on the site, if you don't see it just refresh and it will pop up.
cky2000 said:
I just clicked on the link you posted and it's there. You can always get it from here :laugh: http://forum.xda-developers.com/showthread.php?t=1429873
They have all 3 (WW, US & TW) on there FTP site. As soon as US & TW sync up, I will put them up.
Click to expand...
Click to collapse
I clicked there again and now it's there weird :silly:
So I have a FAQ too ::
What will happened if one uses unlocked, rooted custom ROM (ODJDub v1.0.1 Final) in TF-201 and try to flash this zip over TWRP/CWM
Sent from my Transformer Prime TF201 using Tapatalk 2
re1ic said:
Make sure you get the full download, I've been downloading it for awhile now. Says I've got like 5 hours left, and yeah it's slow as hell. It's no longer showing up on the FTP site either. This is the second time I've tried to download it so if your DL doesn't match 312MB or whatever it is you didn't get the whole thing. All you should have to do is extract the zip to the root of your micro SD card. I don't think it will work while plugged into your keyboard but I could be wrong. It should automatically see that there is an update for your device and install.
Click to expand...
Click to collapse
There all there now WW, US, TW & 10.4.2.15 kernel source.
Related
It's my first time to write this thread.
Could you do me a small favor?
I'am living in Japan and using tf201(JP).
13th March. My Eee Pad Prime is updated to v.9.4.2.17(ICS) from Honeycomb.
After updating, my application was out of order. because of hdmi output and camera module.
I tried to get back to Honeycomb,
but It's failed and my tf201 was bricked.
I got a A/S and repair it. - (it backs ICS version.)
and now I am waiting for new update almostly 2month.
I knew new update has been released. but I couldn't get it.
I can see the new firmware file at ASUS support site.
I don't know how to update it.- I mailed asus support center but I didn't get answer(three weeks ago).
Setting - About tablet - System Firmware Update - Check Update
doesn't work. (There is no update available for your device currently.)
Could you please teach me how to update my tf201 to v.9.4.2.22(JP)?
I looked for method but I couldn't find it.
Just download the update from Asus home page and put it in your internal storage than reboot and you will see a message software update avaliable just clic
Thank you very much!!
rogeriok said:
Just download the update from Asus home page and put it in your internal storage than reboot and you will see a message software update avaliable just clic
Click to expand...
Click to collapse
I tried to update couple of times.
But I didn't try to put update file 'folder' state.
I just did put a file zip and unzip one time-It's also zip file.
I unzipped two times and I could see folder file and I put it in internal storage.
Jaesung Moon said:
I tried to update couple of times.
But I didn't try to put update file 'folder' state.
I just did put a file zip and unzip one time-It's also zip file.
I unzipped two times and I could see folder file and I put it in internal storage.
Click to expand...
Click to collapse
I think your prime's serial must be unknow right?so you won't receive ota updates,you must do it this way everytime,tto me is the same
This is how to update without external SDcard.
Does your existing JP firmware have a choice for English language?
Hope you get it working!
I am rooted on .21.
I backed up via RootKeeper and went ahead to install the update. On installation after rebooting, an android logo came up with a red triangle with an exclamation point in the middle.
My prime rebooted and I got a notification saying update failed and my firmware was restored back to .21 with my root intact.
Now when I check for an update, my Prime says no update was found. I have tried rebooting several times too.
Any ideas?
EDIT:
I am going to try the manual update on this manual:
http://dlcdnet.asus.com/pub/ASUS/EeePAD/TF201/e7203_TF201_Update_SOP.pdf
Remember to unzip and add the zip that you unzipped to the Micro SD.
I got impatient and did Method 2 on this tutorial: http://forum.xda-developers.com/showthread.php?t=1622628
And since I lost root because I was reckless: http://forum.xda-developers.com/showthread.php?t=1706588
I hope this thread helped everyone. I can now say it is solved!
someone can give me a turtial to install the 28 update manually?
gtrs36 said:
someone can give me a turtial to install the 28 update manually?
Click to expand...
Click to collapse
http://usa.asus.com/Eee/Eee_Pad/Eee_Pad_Transformer_Prime_TF201/#download
Download the correct SKU
Copy the file over to the root directory I believe....
But this will erase all your data I think. Which is why I do not want to do that.
Possible Solution!
Okay. So, I was having the same issue. I redownloaded the US version and put on root of my microsd card with same result. Now I was getting frustrated. Just for sh1tz and giggles, I put a copy of the firmware in the root of my sdcard (i left the original in the root of my microsd card also). I then took the microsd card out and put back in. This time i got the triangle notification in the lower right corner notifying me of the update as usual. I pressed on the triangle and it showed TWO files! I picked the latest one by time and date because that is the one I put in the SDCARD root location and....wait for it.....VOILA....it worked. Don't ask me why!
cyiam40 said:
Okay. So, I was having the same issue. I redownloaded the US version and put on root of my microsd card with same result. Now I was getting frustrated. Just for sh1tz and giggles, I put a copy of the firmware in the root of my sdcard (i left the original in the root of my microsd card also). I then took the microsd card out and put back in. This time i got the triangle notification in the lower right corner notifying me of the update as usual. I pressed on the triangle and it showed TWO files! I picked the latest one by time and date because that is the one I put in the SDCARD root location and....wait for it.....VOILA....it worked. Don't ask me why!
Click to expand...
Click to collapse
Would this not allow you to root?
cyiam40 said:
Okay. So, I was having the same issue. I redownloaded the US version and put on root of my microsd card with same result. Now I was getting frustrated. Just for sh1tz and giggles, I put a copy of the firmware in the root of my sdcard (i left the original in the root of my microsd card also). I then took the microsd card out and put back in. This time i got the triangle notification in the lower right corner notifying me of the update as usual. I pressed on the triangle and it showed TWO files! I picked the latest one by time and date because that is the one I put in the SDCARD root location and....wait for it.....VOILA....it worked. Don't ask me why!
Click to expand...
Click to collapse
I downloaded the US firmware, put it on my micro SD root, my /sdcard folder, my / folder, and still nothing. Even after rebooting. What could be the problem?
Plus checking for update yields nothing.
See root posts, SparkyM3 has fixed that. Rooted just fine.
xTRICKYxx said:
I downloaded the US firmware, put it on my micro SD root, my /sdcard folder, my / folder, and still nothing. Even after rebooting. What could be the problem?
Plus checking for update yields nothing.
Click to expand...
Click to collapse
I am in the same boat at the moment, factory data reset didn't help either so don't bother.
So how the hell do we update to .28?!?!
Is there anything we can do to redownload the update and try reinstalling?
xTRICKYxx said:
So how the hell do we update to .28?!?!
Is there anything we can do to redownload the update and try reinstalling?
Click to expand...
Click to collapse
I just gonna leave my tablet for a day and see if its cause the server is caching that we did a update. I guess if worse comes to worse we could do a downgrade, but too much of a hassle for me at the moment.
HiddenSanctum said:
I just gonna leave my tablet for a day and see if its cause the server is caching that we did a update. I guess if worse comes to worse we could do a downgrade, but too much of a hassle for me at the moment.
Click to expand...
Click to collapse
That's what I've been thinking too. I may do a hard reset, root, use rootkeeper, and then go to .28....
Lots of time and energy and I'd rather not do that!
xTRICKYxx said:
That's what I've been thinking too. I may do a hard reset, root, use rootkeeper, and then go to .28....
Lots of time and energy and I'd rather not do that!
Click to expand...
Click to collapse
I already did a hard reset, no luck
You have to unzip the download which should contain another zip, that zip goes onto your internal or micro SD card.
Problem Solved
I found the problem. You need to unzip the manual update file first and you'll get another zip file. Put that into your microSD card and then you should see the new firmware detected icon.
Problem has to do with the fact that we edited something in the system files I believe.
Once you update it to .28 You'll need this to root again
More information on the issue: http://forum.xda-developers.com/showthread.php?t=1707362&page=1
Hope this helps!
From failed .28 update to SUCCESS! (But now must reroot)
Downloaded the update manually from support.asus.com (enter tf201 and find ur appropriate version... For me US), and download it to your removable/external microsd card. Extract it to the root directory of the card, and rename it to EP201_SDUPDATE.zip (***if u don't see the .zip extension, don't add it - this means the file manager you're using doesn't display extensions, and if you add ".zip" the filename will end up as EP201_SDUPDATE.ZIP.ZIP which won't work)
Once you have the file extracted, renamed, and in the right place, hold down "volume down" + power, and dont let go until it reboots AND you see text at the top of the black screen... Then press "volume up" within 5 seconds to install the update. You should see the "Andy with blue nuclear fission ball" animation as the update runs.
Now go find the .28 root method, reroot, and party on.
Btw, I found this in the "bricked after update to .28" thread, but it works for failed updates as well. Hope this helps.
YOU NEED TO UNZIP THE INITIAL .ZIP YOU DOWNLOAD. THE FILE YOU NEED WILL NOT HAVE UPDATELAUNCHER IN THE NAME! Inside of that is the .zip you want. You can unzip that or not. I can confirm it works both ways.
Put the .zip within a .zip on the root of /Removable/microsd/ or /sdcard/ . Safely remove you sd, then reinsert if you choose to use your removable card. I did not have to reboot.
Sent from my Transformer Prime TF201 using Tapatalk
I'm glad people found out our mistakes! I went a little different route and did this:http://forum.xda-developers.com/showthread.php?t=1622628
I did Method 2 since I did a hard reset desperately. I will now re-root using this:
http://forum.xda-developers.com/showthread.php?t=1706588
xTRICKYxx said:
I am rooted on .21.
I backed up via RootKeeper and went ahead to install the update. On installation after rebooting, an android logo came up with a red triangle with an exclamation point in the middle.
My prime rebooted and I got a notification saying update failed and my firmware was restored back to .21 with my root intact.
Now when I check for an update, my Prime says no update was found. I have tried rebooting several times too.
Any ideas?
EDIT:
I am going to try the manual update on this manual:
http://dlcdnet.asus.com/pub/ASUS/EeePAD/TF201/e7203_TF201_Update_SOP.pdf
Remember to unzip and add the zip that you unzipped to the Micro SD.
I got impatient and did Method 2 on this tutorial: http://forum.xda-developers.com/showthread.php?t=1622628
And since I lost root because I was reckless: http://forum.xda-developers.com/showthread.php?t=1706588
I hope this thread helped everyone. I can now say it is solved!
Click to expand...
Click to collapse
OK some guys just like to complain. Just read the forums and nd have some patience.
There a lot of smart people here, they will figure out your problem.
I did the manual d/l and then rooted with sparky method, worked like a charm! Thanks for the support fellow XDA'ers!
Can someone please post a copy of the ORIGINAL build.prop from the .21 firmware please. thanks
Sent from my Transformer Prime TF201 using xda premium
I am in the process of upgrading to the 4.03.605.1 rom posted here: http://forum.xda-developers.com/showthread.php?t=1830859, but I am having issues with the firmware upgrade package. My computer says the zip is corrupted, and the phone will not read it. Has anyone else had issues, or have a resolution? I checked the md5sums and they match.
Thanks
mustangz5 said:
I am in the process of upgrading to the 4.03.605.1 rom posted here: http://forum.xda-developers.com/showthread.php?t=1830859, but I am having issues with the firmware upgrade package. My computer says the zip is corrupted, and the phone will not read it. Has anyone else had issues, or have a resolution? I checked the md5sums and they match.
Thanks
Click to expand...
Click to collapse
is it a zip inside of a zip? zipception?
synisterwolf said:
is it a zip inside of a zip? zipception?
Click to expand...
Click to collapse
I tried to check that, but I can't even open the initial zip. Windows throws an error of "error [file]; start of central directory not found; Zip file corrupt. Possible cause: file transfer error."
mustangz5 said:
I tried to check that, but I can't even open the initial zip. Windows throws an error of "error [file]; start of central directory not found; Zip file corrupt. Possible cause: file transfer error."
Click to expand...
Click to collapse
Sounds like a bad download. I got that too from android police. Might try it again.
Sent from my iPhone...
synisterwolf said:
Sounds like a bad download. I got that too from android police. Might try it again.
Sent from my iPhone...
Click to expand...
Click to collapse
Yea I tried to download it a few different times, and tried from other websites too (which just link back to the same files). Had to put a recovery back on my phone so I could use it again after hours of trying to find the solution.
Anyone else have any ideas?
mustangz5 said:
Yea I tried to download it a few different times, and tried from other websites too (which just link back to the same files). Had to put a recovery back on my phone so I could use it again after hours of trying to find the solution.
Anyone else have any ideas?
Click to expand...
Click to collapse
you can get the global ruu right here.....http://bit.ly/RaKEAr
Thank you! Does this file contain both the firmware and the OS update? I was able to download the OS update just fine on the other page, just not the firmware.
Appreciate the help!
Actually - that zip file contains the same error as the other link. Anyone know of a different location of a non-corrupted file?
mustangz5 said:
Actually - that zip file contains the same error as the other link. Anyone know of a different location of a non-corrupted file?
Click to expand...
Click to collapse
Try the update to the global RUU. Found one on AndroidPolice but can't post link here yet. Just google androidpolice global ruu
Android zip files need 7zip if you want to look inside it.
Also check that you aren't renaming it as ph98img.zip.zjp because windows hides the file type by default.
So this was a two part issue! #1) post above was right about winzip not being able to handle the file.
Second issue was that I did not have the bootloader re-locked, which is required for this kind of update. I came from the tbolt which didnt require locking & unlocking.
delete
Greetings All,
I am attempting to update my TF201 to Jelly Bean but am not having any luck. The OTA update failed initially, and now when I search for updates, the tablet says there are none. I then decided to get the update file manually, but I can't get my tablet to discover that the update is present and ready to be installed. Can't figure out what I am doing wrong. Everything I have read thus far says to download the update, extract the zip file (resulting in another zip file with a slightly different name - I am on the WW version of the tablet BTW) to the root of the tablets internal storage, and reboot the device. Once it boots up again, it should detect the update and prompt me to install it.
Regardless of whether I put it on the internal storage, or on the external SD card, I cannot get this thing to detect the update and prompt me to install. I have also attempted extracting the second zip file so I end up with a META-INF folder and the blob. Putting this in the root of the internal storage and the root of the SD card didn't work either.
The device is currently rooted, and has been reset to factory several times during this process.
Any suggestions? Have I missed something totally obvious here?
Thanks!
Edit: Currently running ICS, on the stock 9.4.2.28 build from Asus.
Can't post links right now but trekest has a method that worked for me
Sent from my Zio using xda app-developers app
McJesus15 said:
Can't post links right now but trekest has a method that worked for me
Sent from my Zio using xda app-developers app
Click to expand...
Click to collapse
This one?
http://forum.xda-developers.com/showpost.php?p=32099246&postcount=154
Followed it to the letter. Rebooted the tablet once I had done everything specified via shell and the tablet simply rebooted. Still on ICS. Tried to replace the build.prop as mentioned at the bottom (after backing up my existing one of course), and it still simply rebooted.
Update: After a few more reboots, the tablet detected the update file. Unfortunately, the dlpkgfile I got was the US version (I need the WW version). An alternate download link from the one listed in the link above also gave me the US version (even though the poster said it was WW). Once I find the WW version, I should be able to get this update wrapped up.
I had the same problem.
In my case the solution was to copy the extracted ZIP file to the root folder, rename it to 'dlpkgfile' then reboot.
When it restarted, I then had the prompt that a system update was available but on checking the root folder, the 'dlpkgfile' file had been deleted so I repeated the process above, then clicked the update notification & away it went & did the update normally.
Hope that helps.
magrath1 said:
I had the same problem.
In my case the solution was to copy the extracted ZIP file to the root folder, rename it to 'dlpkgfile' then reboot.
When it restarted, I then had the prompt that a system update was available but on checking the root folder, the 'dlpkgfile' file had been deleted so I repeated the process above, then clicked the update notification & away it went & did the update normally.
Hope that helps.
Click to expand...
Click to collapse
Seems to have worked. Thanks!
I backed up my root from ICS, but when I started VooDoo again, my root backup was gone. Is there a working root tool available yet? Or is JB rooting still being worked on? I've been poking around the forum but have only turned up rooting tools that work for ICS thus far.
dochouse said:
Seems to have worked. Thanks!
I backed up my root from ICS, but when I started VooDoo again, my root backup was gone. Is there a working root tool available yet? Or is JB rooting still being worked on? I've been poking around the forum but have only turned up rooting tools that work for ICS thus far.
Click to expand...
Click to collapse
Yeah. Same here.
Apparently it can be done by rolling back to an old ICS version, updating to .28, backing up root with RootKeeper, re-flashing JB & restoring root. Seems like a lot of trouble though.
Think I'll just wait until someone meare learned than I comes up with a working exploit...I'm sure it won't be too long.
magrath1 said:
I had the same problem.
In my case the solution was to copy the extracted ZIP file to the root folder, rename it to 'dlpkgfile' then reboot.
When it restarted, I then had the prompt that a system update was available but on checking the root folder, the 'dlpkgfile' file had been deleted so I repeated the process above, then clicked the update notification & away it went & did the update normally.
Hope that helps.
Click to expand...
Click to collapse
I just tried doing this several times and on my tablet the update starts but then at about one third in it stops and fails. I have repeated the process 5 times using all the suggestions and even re downloading the file and same thing, I am just going to wait but so far no OTA available yet when I do the firmware update check it just tells me no update available for my device .
Finally tried using Baxbuda's manual method by downloading the firmware from Asus then renaming the file EP201_SDUPDATE.zip and copying the file to my MicroSD card and started the update using the power + vol. down, then releasing the power button and pressing the vol. up and it completed the upadate and I now have JB and so far it is fast and smooth with no issues to report
Jesse6749 said:
I just tried doing this several times and on my tablet the update starts but then at about one third in it stops and fails. I have repeated the process 5 times using all the suggestions and even re downloading the file and same thing, I am just going to wait but so far no OTA available yet when I do the firmware update check it just tells me no update available for my device .
Finally tried using Baxbuda's manual method by downloading the firmware from Asus then renaming the file EP201_SDUPDATE.zip and copying the file to my MicroSD card and started the update using the power + vol. down, then releasing the power button and pressing the vol. up and it completed the upadate and I now have JB and so far it is fast and smooth with no issues to report
Click to expand...
Click to collapse
Tried both of the reported method and I had no luck at all. With the Power+vol down. then releasing power and then pressing vol.up... when is this done?
The following worked for me.
-------------------------------------------------------
To update to new firmware versions for the tablet.
Download the appropriate update from ASUS support website for the TF201 Transformer Prime Tablet
Extract the zip file within the downloaded zip file from ASUS support.
Get an SD card of some sort.
Create the Folder \ASUS
Create the folder \ASUS\Update within the ASUS folder
Copy and Paste the US-epad-user-x.x.x.x.zip file into the \ASUS\Update folder.
Plug the SD card into the Tablet. It will show a triangle with ! in the system area.
Tap on it to start the update process.
anyone managed to root a tf201 with the latest asus jellbean rom on? seems a real pain to have to flash down to the factory rom, unlock, root then install a custom rom.
when i say "real pain" i mean, it's a heap more hassle than trying out a few custom roms on my i9300!
I haven't seen anyone post this yet but I have an unlocked photon and I downloaded the 2.3.5 update to see the files and where they are placed. I found files placed in /cache
Blur_Version.45.3.6.MB855.Sprint.en.US.crc inside is the number 2792078675
and
Blur_Version.45.3.6.MB855.Sprint.en.US.zip
and
downloadfile.apk
weird thing is that "downloadfile.apk" shows up at 0.0kb and after moving it to sd card it is still 0.0kb. It's completely empty!?
The two Blur files show 0.0kb and they were last updated dec 31 1969 at 7pm. then when you move to sd card the .crc file is 1kb and the .zip file is 127,594kb.
I'll get a change to upload it maybe tomorrow if anyone wants to look at it.
after moving the files to sd card the update reminder stopped popping up and showed an error or something about not being able to update blah blah. I'll try to find out exactly and repost. I was thinking maybe we can trick the phone into thinking something we made is an official update. I'm sure its checked at some level though. I'll dig deeper and any insight regarding this would be appreciated.
If you be so kind, I would love a copy of the update.
Sent from my Slim Photon using xda app-developers app
tdhite said:
If you be so kind, I would love a copy of the update.
Sent from my Slim Photon using xda app-developers app
Click to expand...
Click to collapse
I'll try to upload it tonight. I tried editing the update and placing it back in the /cache where I found it and it recognized it and asked me to install it but it tried and rebooted and I got an error. It said it could not install. So I guess there is some md5 or some other check done before the install.
Do not flash this if you are unlocked, it will relock and possibly soft-brick your phone, if relocked you will not be able to unlock again. This is not new, we have had this file for a while.
Lightsword1942 said:
Do not flash this if you are unlocked, it will relock and possibly soft-brick your phone, if relocked you will not be able to unlock again. This is not new, we have had this file for a while.
Click to expand...
Click to collapse
Yeah -- I got screwed by the OTA update, but I *don't* have the update file. Where does it actually exist other than this OP's offer to upload it? I'll just get it from there. I've searched to no avail for 2.3.5 sbf, photon OTA, and other similar searches -- none come up with the actual download. I must be missing the right search?
Thanks for any info.
Update (again): A valid link can be found here: http://forum.xda-developers.com/showthread.php?p=29216728#post29216728 so have at 'er folks.