Related
Ok... So a couple of days ago, I was having bootloop issues on Ineffabilis 1.3 using the Anthrax kernel. After doing a battery pull, I booted into the bootloader and then to recovery and found that my roommate, while playing with my phone, had flashed the ClockworkMod Recovery, I suppose through the Rom Manager app.
I figured it would be ok to do a full wipe and re-flash the rom since flashing the stock kernel didn't stop the bootlooping and I would just flash AmonRa back when I was done to do a backup.
Well, after doing a factory reset from CWM and getting errors thereafter trying to flash the superwipe and Ineffabilis, I rebooted the phone and skipped through the setup to get to the restart menu to get into the bootloader again to flash AmonRa. I was able to flash it, but now every time I try to get into the recovery whether from the restart menu, ADB, or through the fastboot menu, it automatically restarts the phone as soon as the recovery is loaded and goes back to the OS.
Has anyone experienced this and is there any way to fix it to get back into it?
Sounds like you have a ph image on your sd card. Just delete it and you should be fine
sent from ics land
I've long since removed all PH files from my phone, internal and external sdcard included, and even if there were that's never stopped my from booting directly into recovery from the restart menu or through ADB.
I've even gone as far as removing the external sdcard with the same result. It just boots into recovery and as soon as it loads for that split second, it automatically reboots to the HTC screen and back to Android.
I still have root and my phone isn't bricked. I just can't flash any roms or kernels in the future when we get our official ics update. WTB my EVO 3D's hboot 1.4 back...
Sent from my ADR6425LVW using XDA
ojdidit84 said:
I've long since removed all PH files from my phone, internal and external sdcard included, and even if there were that's never stopped my from booting directly into recovery from the restart menu or through ADB.
I've even gone as far as removing the external sdcard with the same result. It just boots into recovery and as soon as it loads for that split second, it automatically reboots to the HTC screen and back to Android.
I still have root and my phone isn't bricked. I just can't flash any roms or kernels in the future when we get our official ics update. WTB my EVO 3D's hboot 1.4 back...
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
what happens when you try to go to recovery...
i would just reflash a recoveyr in fastboot. cant hurt.
What it does is as soon as it boots to recovery, I see it load the recovery and then as soon as it loads, it's as if the phone automatically selects the reboot option and goes back through the normal boot no matter which method I use to boot into recovery.
I've done the fastboot method which flashed successfully, tried to re-flash clockwork using rom manager, scott's tool, adb & fastboot, also used scott's flash tool which was also successful and it just seems as if recovery mode is borked somehow and using these methods to go back to AmonRa produce the same result. I'm usually good at figuring these things out myself since I've been rooting and flashing since my first Sprint HTC Hero, EVO 4G, 3D, Epic 4G/Touch and I've never had anything like this happen before. Completely stumped .
Have done a search and haven't found anyone with the same issue so I have nothing prior to go off of. The phone works fine for now so I'm in no hurry since I still have root and thankfully Titanium Backup for my apps. Not sure what to try next at this point.
ojdidit84 said:
What it does is as soon as it boots to recovery, I see it load the recovery and then as soon as it loads, it's as if the phone automatically selects the reboot option and goes back through the normal boot no matter which method I use to boot into recovery.
I've done the fastboot method which flashed successfully, tried to re-flash clockwork, also used scott's flash tool which was also successful and it just seems as if recovery mode is borked somehow. I'm usually good at figuring these things out myself since I've been rooting and flashing since my first Sprint HTC Hero, EVO 4G, 3D, Epic 4G/Touch and I've never had anything like this happen before. Completely stumped .
Have done a search and haven't found anyone with the same issue so I have nothing prior to go off of. The phone works fine for now so I'm in no hurry since I still have root and thankfully Titanium Backup for my apps. Not sure what to try next at this point.
Click to expand...
Click to collapse
From hboot, choose factory reset and see if it boots you into recovery. I had a similar issue after running the new RUU, once I chose that it booted into custom recovery and i was able to reboot and then afterwards had no trouble accessing recovery.
mjh68 said:
From hboot, choose factory reset and see if it boots you into recovery. I had a similar issue after running the new RUU, once I chose that it booted into custom recovery and i was able to reboot and then afterwards had no trouble accessing recovery.
Click to expand...
Click to collapse
Ok. I'll give that a whirl in the morning and see if it solves the problem.
Bump... I'm stuck with this issue...
Hi,
Spent the last two days trying everything I could think of to get a custom recovery loaded on my rezound with no luck. Have searched everywhere and short of trying to hex edit some code nothing has worked.
I was on a custom ICS rom and applied the 4.03.605.2 RUU (hboot 2.27). Was S-ON with unlocked bootloader. I locked the bootloader, installed RUU successfully, unlocked the bootloader with my token. I tried flashing amon-ra, CWM, TWRP many versions of each by fastboot and hboot (PH98IMG). The custom recovery is successfully written in each case, but i can't successfully boot into the recovery partition either from fastboot or hboot menu option. I can write the recovery.img file from the RUU zip, and all is good. Ultimately, I am just trying to install a custom ROM/root my device.
I tried the above advice about performing a factory reset. No Dice. So for now, I am stuck in Verizon bloatware land, and very unhappy about it.
Suggestions welcome. Thanks everyone.
phaedrus43 said:
Hi,
Spent the last two days trying everything I could think of to get a custom recovery loaded on my rezound with no luck. Have searched everywhere and short of trying to hex edit some code nothing has worked.
I was on a custom ICS rom and applied the 4.03.605.2 RUU (hboot 2.27). Was S-ON with unlocked bootloader. I locked the bootloader, installed RUU successfully, unlocked the bootloader with my token. I tried flashing amon-ra, CWM, TWRP many versions of each by fastboot and hboot (PH98IMG). The custom recovery is successfully written in each case, but i can't successfully boot into the recovery partition either from fastboot or hboot menu option. I can write the recovery.img file from the RUU zip, and all is good. Ultimately, I am just trying to install a custom ROM/root my device.
I tried the above advice about performing a factory reset. No Dice. So for now, I am stuck in Verizon bloatware land, and very unhappy about it.
Suggestions welcome. Thanks everyone.
Click to expand...
Click to collapse
Hook up to PC. the phone can actually adb when turned off. or make sure ROM is booted with ADB turned on. It should connect to adb. Does it? Then your command would be "adb reboot recovery" after you have flashed a custom recovery. So what does it do when you try to enter recovery?
Thanks. Did try that, but not with phone off. I'll try both for good measure and let you know. Thank you fly...
Sent from my ADR6425LVW using xda app-developers app
Flyhalf205 said:
Hook up to PC. the phone can actually adb when turned off. or make sure ROM is booted with ADB turned on. It should connect to adb. Does it? Then your command would be "adb reboot recovery" after you have flashed a custom recovery. So what does it do when you try to enter recovery?
Click to expand...
Click to collapse
Hi Fly,
I was unable to get adb to see the phone when it was off with either a custom recovery or the stock recovery. When I rebooted to recovery from adb with a custom recovery installed, it attempts to boot to the recovery partition but fails and boots back to the OS (this is true when using adb, fastboot, and hboot to boot to recovery). When i reinstalled the stock recovery, it successfully boots to recovery using all methods.
i have tried other custom recovery versions, TWRP (preferred), AMON-RA, CWM Recovery...
annoyed.
Thanks Fly. Any other ideas?
phaedrus43 said:
Hi Fly,
I was unable to get adb to see the phone when it was off with either a custom recovery or the stock recovery. When I rebooted to recovery from adb with a custom recovery installed, it attempts to boot to the recovery partition but fails and boots back to the OS (this is true when using adb, fastboot, and hboot to boot to recovery). When i reinstalled the stock recovery, it successfully boots to recovery using all methods.
i have tried other custom recovery versions, TWRP (preferred), AMON-RA, CWM Recovery...
annoyed.
Thanks Fly. Any other ideas?
Click to expand...
Click to collapse
I'm out of ideas. Since your s-on you can't go down to the OTA RUU and try there. Maybe someone else can spread some light.
Well one more idea. Boot your phone into Fastboot. Plug into computer and download a custom recovery to your computer. The command to use is "fastboot boot recovery.img"
If that does work then download http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.1.3-arm-signed.zip and flash it inside of recovery. That will give you root inside your stock rom at least.
Flyhalf205 said:
I'm out of ideas. Since your s-on you can't go down to the OTA RUU and try there. Maybe someone else can spread some light.
Well one more idea. Boot your phone into Fastboot. Plug into computer and download a custom recovery to your computer. The command to use is "fastboot boot recovery.img"
If that does work then download http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.1.3-arm-signed.zip and flash it inside of recovery. That will give you root inside your stock rom at least.
Click to expand...
Click to collapse
Hi Fly,
Nothing doing. Can't flash the attached in stock recovery, can't boot into any recoveries with stock flashed or with custom recovery flashed. Seems there must be some new security built into the new RUU? I did note one thing. When I first flash the RUU the hboot banner says relocked (as i have to relock to install an RUU). However, as soon as I flash anything to the recovery partition it adds a new white on black banner that says tampered. Now, i have seen that before when I s-off'd my rezound previously (returned to verizon for audio problems). I never did s-off this particular phone. I don't recall my first phone flagging a new recovery or this phone flagging a new recovery on the old firmware (i could be wrong though as i don't spend a lot of time in hboot).
Still hoping to put a custom recovery on this. Any other way to load a custom rom? i really want to run Neo's AOKP, as I had that on here before I RUU'd. In fact, i got into this position because I was going to s-off the phone, but I had a custom rom. I started looking for RUU's to restore to stock because controlbear wouldn't work with custom rom. Instead of installing an early ICS again, i opted to install the latest RUU.
I searched the forums high and low and wasn't really able to find anyone with this problem. I wonder if there is something wrong with the RUU? I checked the MD5sum and it matched. When flashing recovery i checked the mainver too, so it isn't that... I'm stumped.
This phone wasn't real popular and is gettting old now (man, the lifecycle on phones suck, I had my N1 through many roms and AOSP releases! These new phones are gone in 6 months, a year tops). I doubt anyone is going to trouble themselves to crack a new HBOOT on this phone (this is 2.27).
Only other things i can think (and I haven't tried yet) is trying zergRushing it for temp root to at least remove/freeze the bloat like I did with this phone when I first got it. Or if I can just get a rom installed without a custom recovery I don't flash as often as I used to and figure an upgrade isn't long off. Or if i could downgrade the hboot or install jb hboot...
Would love it if someone had something new to try.
Thanks so much again Fly and happy holidays.
Success! (but how?)
Ok Fly,
I don't get it... not at all. I tried, just for the hell of it, a little more tonight and my phone was happy to flashboot boot TWRP 2.2.2.1 SPECIFICALLY. I was unable to get other versions working or other custom recoveries. I have no IDEA why. I can only think that the recovery partition is too small for some recovery.imgs? but 2.2.2.1 is actually bigger than 2.3.3.0 that you compiled for the rezound. Anyway, i have ROOT! now, my first step before I dork with anything is to S-Off this bad boy so i can move around a little more. I will probably still leave the locked bootloader after that, just to keep me from n00bing up. Haven't tried flashing the twrp recovery yet, don't want to goof up my S-off chances or not give you a chance to ask a question.
If you want some forensics to help others out, please let me know. I am gonna leave this phone alone for a day in case you have questions. There HAS to be some lesson in here. Totally random to me. (last thought) i was running 2.2.2.1 before I ran the RUU... wonder if that has something to do with it?
Thanks again Fly.
phaedrus43 said:
Ok Fly,
I don't get it... not at all. I tried, just for the hell of it, a little more tonight and my phone was happy to flashboot boot TWRP 2.2.2.1 SPECIFICALLY. I was unable to get other versions working or other custom recoveries. I have no IDEA why. I can only think that the recovery partition is too small for some recovery.imgs? but 2.2.2.1 is actually bigger than 2.3.3.0 that you compiled for the rezound. Anyway, i have ROOT! now, my first step before I dork with anything is to S-Off this bad boy so i can move around a little more. I will probably still leave the locked bootloader after that, just to keep me from n00bing up. Haven't tried flashing the twrp recovery yet, don't want to goof up my S-off chances or not give you a chance to ask a question.
If you want some forensics to help others out, please let me know. I am gonna leave this phone alone for a day in case you have questions. There HAS to be some lesson in here. Totally random to me. (last thought) i was running 2.2.2.1 before I ran the RUU... wonder if that has something to do with it?
Thanks again Fly.
Click to expand...
Click to collapse
Anytime :fingers-crossed:
Crazy how things work like this. But the recovery partition shouldn't be to small to flash a custom recovery. Good luck. Just sounds like one of those rare things that happens.
Backstory: I tried flashing android revolution for the amaze once, and it didn't work (error 1) left it alone for a bit after recovering it, went back to bulletproof and flashed faux .009 kernel, then decided to try again...
Well I'll try to make this brief, sorry if I'm posting in the wrong subforum but here goes, I tried going from bulletproof 2.5.0 to Android Revolution HD and didn't flash the superwipe .zip (lazy me). The install failed with the same error 1, only this time I can't boot back into recovery. Booting to bootloader works but when I tried going into recovery I see it pop up for maybe a fraction of a second before the phone reboots.
I've tried reflashing clockwork mod but no dice
any sort of tips you folks can give me to steer me in the right direction?
Pulsewave said:
Backstory: I tried flashing android revolution for the amaze once, and it didn't work (error 1) left it alone for a bit after recovering it, went back to bulletproof and flashed faux .009 kernel, then decided to try again...
Well I'll try to make this brief, sorry if I'm posting in the wrong subforum but here goes, I tried going from bulletproof 2.5.0 to Android Revolution HD and didn't flash the superwipe .zip (lazy me). The install failed with the same error 1, only this time I can't boot back into recovery. Booting to bootloader works but when I tried going into recovery I see it pop up for maybe a fraction of a second before the phone reboots.
I've tried reflashing clockwork mod but no dice
any sort of tips you folks can give me to steer me in the right direction?
Click to expand...
Click to collapse
Not sure about the Amaze tbh, but if I had a failed flash on either of my HTC phones, I just re RUU'd.
D'oh! I forgot about that! Had to do that for my buddy's thunderbolt a few times. Lemme give that a shot and I'll report back
Edit: Worked
Edit:double post
im also having this problem, my phone keeps freezing at the startup screen when the htc logo pops up. i dont know much about this kind of stuff so i would really appreciated if anyone could guide me to what to do
the way that my phone froze like that was that i tried to flash a kernel for the Energy rom, i did installed the rom itself
http://forum.xda-developers.com/showthread.php?t=1362759 this is the rom that i wanted to use
and i flashed the kernel that was provided in the 4th post, i downloaded that file, extracted and ran the .bat file and thats how it happened
i would appreciate if anyone could help me with this
Bricked Htc Amaze 4g
I have a bricked HTC Amaze 4g. I had beastmod v2.20 on when i decided i wanted quick sense. After i finished it just froze on the htc startup logo. I played with it and got it into a bootloop. When i try to flash a ruu the blue bar loads up and comes back to the bootloader screen. I can get into recovery but it wont let me flash anything.Thanks to whoever replies I really appreciate it.
lmfaoomg said:
im also having this problem, my phone keeps freezing at the startup screen when the htc logo pops up. i dont know much about this kind of stuff so i would really appreciated if anyone could guide me to what to do
the way that my phone froze like that was that i tried to flash a kernel for the Energy rom, i did installed the rom itself
http://forum.xda-developers.com/showthread.php?t=1362759 this is the rom that i wanted to use
and i flashed the kernel that was provided in the 4th post, i downloaded that file, extracted and ran the .bat file and thats how it happened
i would appreciate if anyone could help me with this
Click to expand...
Click to collapse
You need to superwipe the phone and flash the ROM. After the ROM flashes, you have to flash the kernel twice.
samiaziz said:
I have a bricked HTC Amaze 4g. I had beastmod v2.20 on when i decided i wanted quick sense. After i finished it just froze on the htc startup logo. I played with it and got it into a bootloop. When i try to flash a ruu the blue bar loads up and comes back to the bootloader screen. I really appreciate it.
Click to expand...
Click to collapse
Same with you. You need to superwipe the phone and flash the ROM. After the ROM flashes, you have to flash the kernel twice.
Superwiping the phone removes all the data from the old ROM so you can install a fresh clean ROM.
If you want to install the RUU, you have to relock the bootloader first and then you can reflash the original RUU
Edit: i was misinformed
Sent from my NRGized Amaze...
via xda premium
aj_2423 said:
I dont believe u have to relock
Sent from my NRGized Amaze...
via xda premium
Click to expand...
Click to collapse
To flash an official RUU, you must relock it. I've done so plenty of times lol
Sent From My HTC Amaze 4G via Someone's Room
If the phone wont go into recovery, you have to use ADB and wipe the cache partition for it to go into recovery again. This is apparently a bug with some of recoveries posted by other devs in the development forum. You need to use fastboot.exe to wipe the cache via adb
And if... If the superwipe doesn't work due to recovery version you have try to boot in to your Bootloader run one of hasoon's tool and choose different recovery.. it did happen to me the bootloop before due to the fact the old roms like mike's rom. he doesn't update his script to support the newer recoveries and it doesn't support X's recovery, it will give you an error installation.. just try different recoveries and for sure your problem will be solved..
just make sure boot in your bootloader/H-boot then run hasoon's tool and have enough battery just to make sure...
hasoon2000 said:
To flash an official RUU, you must relock it. I've done so plenty of times lol
Sent From My HTC Amaze 4G via Someone's Room
Click to expand...
Click to collapse
Thanks for the good info Sir but i my HTC Amaze is bootloader locked and S-ON but i cannot find a RUU for T-mobile to unbrick it. Will a Ruu such as this one work?
RUU_Ruby_Videotron_CA_1.46.1530.1_R2_Radio_1.09.550L.17DC_30.68.550L.09_release_227343_signed.exe
My HTC Amaze scans all the versions of the PH85IMG i place on the sd card but goes back to the menu when its down
any advice that could help i will appreciate!
There's a thread in the dev section that has about a dozen RUUs. I don't see how one can miss it.
Thanks for your reply but i was a little unsure and did not want to make my phone any worst than it already is.
Can you explain 1 thing thing for me please - RUU always you to flash the phone via the computer? where as PH85img.zip allows you to flash the phone via sdcard? I hope i am correct here.
but i want to know how can i flash the phone when its connected via HBoot usb cause my pc recognizes it as "Android Composite ADB Interface"
Currently this is what is on my lcd
LOCKED
RUBY PVT SHIP S-ON RL
HBOOT-1.93.0002
EMMC BOOT
MAR 15 2012
i have tried several PH85img.zip files but the phone just scans them and goes back to the menu.
Some help will be appreciated extremely.
---------- Post added at 03:40 PM ---------- Previous post was at 03:33 PM ----------
I forgot to mention it connects to the pc but when i run command adb devices this is what i get
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\rquinlan.GOSL_DOM>adb devices
List of devices attached
C:\Documents and Settings\rquinlan.GOSL_DOM>
The latest ruu would be your best option, do not put the .zip part of the name since its already there, also a ruu may be an exe or zip file, since it is a complete stock file to restore the device, what would your carrier be to be exact? Just not up to reading through everything in this thread to see if you mentioned that piece of info, if its tmobile then the very first file in the stock ruu/ota thread would be the file you need.
Sent from my iPad using Tapatalk HD
thanks for your advice i managed to reboot the phone into recovery but heres whats strange to me the phone is in recovery with HTC on the screen thats it, the pc has recognized it as "MY HTC" in the device manager however, when i run the command adb devices this is what i get "SH218vp00163 offline". i ran the RUU file but i get error 170 usb connection.
so i am a bit lost as device manager can see the phone but the RUU file cannot and i am plugging the phone into the rear of the pc.
any ideas
Linkzz said:
thanks for your advice i managed to reboot the phone into recovery but heres whats strange to me the phone is in recovery with HTC on the screen thats it, the pc has recognized it as "MY HTC" in the device manager however, when i run the command adb devices this is what i get "SH218vp00163 offline". i ran the RUU file but i get error 170 usb connection.
so i am a bit lost as device manager can see the phone but the RUU file cannot and i am plugging the phone into the rear of the pc.
any ideas
Click to expand...
Click to collapse
Why are you using recovery exactly?
RUU's are to be flash via hboot, which is the very first screen you see when you go into the device's bootloader, in the case of exe files, you'll need to flash it via fastboot mode, which happens to be, correct me if I'm wrong, the very first or second option on the hboot menu.
yes you are correct cause i just tried it with an RUU from another carrier. i found out that the phone had 2.14.531 software installed. but the RUU i was using was 1.46 and so i got a signature error 132. now i need to find a way to remove the 2.14.531 software and replace it with a lower version. can you help me here
Linkzz said:
yes you are correct cause i just tried it with an RUU from another carrier. i found out that the phone had 2.14.531 software installed. but the RUU i was using was 1.46 and so i got a signature error 132. now i need to find a way to remove the 2.14.531 software and replace it with a lower version. can you help me here
Click to expand...
Click to collapse
What carrier are you on?
t-mobile
this is the RUU i tried and made a connection but the PH85img.zip are not working no matter how i try
RUU_Ruby_Videotron_CA_1.46.1530.1_R2_Radio_1.09.55 0L.17DC_30.68.550L.09_release_227343_signed.exe
Hi,
I have a Sprint CDMA HTC EVO 3D. I tried root and get S-OFF for it. Unfortunately I failed and now the phone fail to boot.
Below is what I did from which you might be able to diagnose it and give me suggestions.
(1) The original status of mu phone is:
Stock rom, I never root it before.
HBOOT-1.58.0000
Android Version: 4.03
HTC Sense version: 3.6
Software version: 2.95.651.6.710RD
(2) My root procedures:
I followed this post: http://forum.xda-developers.com/showthread.php?t=1813818
I successfully unlocked phone with HTCDev, successfully Flashed 4EXT recovery, and successfully installed Superuser-3.1.3-arm-signed.zip. I also booted into sytem, everything worked well.
However I failed in next step of JuopunutBear's Wire Trick (S-OFF). When I ran ControlBear.exe, it finally hanged there.
Current status of my phone:
Unfortunately I did not make a backup to my original ROM, so there is no way to revert back by restoring backup.
Now the phone is in unlocked status, I was able to boot to HBOOT and also enter 4Ext recovery, however I am not able to boot into Android. If I try to boot into Android, it always hang at black screen.
I am able to boot to fastboot (USB) mode, I tried to flash some stock ROM (listed at http://forum.xda-developers.com/showpost.php?p=24268786&postcount=209), but I failed. For example, I ran a RUU of 2.89.exe, it detected my phone version is 2.95, and further update RUU failed.
Looks like my partition is ruined, but I might be wrong.
ANyone can help me to restore my phone to working status? At least I need the phone to be able to boo to Android.
Here are also some tries that I ever did:
(1) I ever put the PG86IMG.zip file (downloaded from http://forum.xda-developers.com/showpost.php?p=21593454&postcount=564) to my sdcard, still failed.
(2) I ever formatted all partition from 4EXT recovery
lsdyna said:
Here are also some tries that I ever did:
(1) I ever put the PG86IMG.zip file (downloaded from http://forum.xda-developers.com/showpost.php?p=21593454&postcount=564) to my sdcard, still failed.
(2) I ever formatted all partition from 4EXT recovery
Click to expand...
Click to collapse
EDIT:
Okay. I've got some questions.
1. You're stuck on some black screen as you said. It boots past the white HTC splash and then it's stuck on that black screen, right. Do you mean the juopunutbear "arrow screen" - juopunutbears boot.img?
2. I think if you had flashed the original boot img everything would have been fine.
3. The easiest way is to flash to stock, so lets try to figure out why it doesn't flash.
MrJyrks said:
Okay. So from what I understood, you are stuck on the black juopunutbear screen, right?
Click to expand...
Click to collapse
Yes, after I was stuck with black juopunutbear screen, I took battery out, reboot again, never was able to root to Android. I am only able to boot to HBoot.
lsdyna said:
Yes, after I was stuck with black juopunutbear screen, I took battery out, reboot again, never was able to root to Android. I am only able to boot to HBoot.
Click to expand...
Click to collapse
And you can boot to recovery, right?
EDIT:
One more thing. Which ruu were you trying to run
Edit2:
What's your CID? Use "fastboot getvar cid" or "fastboot oem readcid" (without quotes).
Edit3:
BTW, this was on the wire trick page... http://unlimited.io/jbtroubleshooting.htm - TROUBLESHOOTING There was everything you needed to know when you failed at something. Remember that page. You may need it the next time you try to do the wiretrick.
Q: Were you using a linux distro for the wire trick and did you use the appropriate files for wire trick since GB and ICS have separate tools?
If you want I may assist you in gaining s-off if we get this thing functional again.
Yes, I am able to boot to recovery.
I tried ROM's here
http://forum.xda-developers.com/showpost.php?p=24268786&postcount=209
and
http://forum.xda-developers.com/showthread.php?p=22519105#post22519105
I tried 2.17, 2.89, unfortunately none of them worked
My CID is SPCS_001
MrJyrks said:
And you can boot to recovery, right?
EDIT: One more thing. Which ruu were you trying to run
Edit2: What's your CID? Use "fastboot getvar cid" or "fastboot oem readcid" (without quotes).
Click to expand...
Click to collapse
lsdyna said:
Yes, I am able to boot to recovery.
I tried ROM's here
http://forum.xda-developers.com/showpost.php?p=24268786&postcount=209
and
http://forum.xda-developers.com/showthread.php?p=22519105#post22519105
I tried 2.17, 2.89, unfortunately none of them worked
My CID is SPCS_001
Click to expand...
Click to collapse
Aw man, I'm completely sorry I didn't see this: Software version: 2.95.651.6.710RD
That means, no RUU for you cause htc/sprint wasn't kind enough to provide the ruu. Also FYI you can't flash a ruu lower than your current one.
So your best bet is to flash the most stock 2.95 cdma rom you could find and right after, flash the stock cdma evo 3d kernel through fastboot or 4ext (I think 4ext smartflash does the same thing). Try to find something that's COMPLETELY STOCK - with no mods whatsoever or if you couldn't find any, try something that's almost* stock. That should get you booting and you can try s off again.
Edit: This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Now I only want to revert my phone to stock, not considering root at present time.
I searched 2.95 ROM, unfortunately the highest version that I can find is 2.89. Does this mean I have no way to revert my phone to live? Thanks a lot.
MrJyrks said:
Aw man, I'm completely sorry I didn't see this: Software version: 2.95.651.6.710RD
That means, no RUU for you cause htc/sprint wasn't kind enough to provide the ruu. Also FYI you can't flash a ruu lower than your current one.
So your best bet is to flash the most stock 2.95 cdma rom you could find and right after, flash the stock cdma evo 3d kernel through fastboot or 4ext (I think 4ext smartflash does the same thing). Try to find something that's COMPLETELY STOCK - with no mods whatsoever or if you couldn't find any, try something that's almost* stock. That should get you booting and you can try s off again.
Click to expand...
Click to collapse
I ever run a RUU 1.13...exe for mmy phone, it said my device is having 1.000, and it tried to update to 1.13. However, the update procedure always failed at some point, some at beginning, some failed at 'wring signature'...
MrJyrks said:
Aw man, I'm completely sorry I didn't see this: Software version: 2.95.651.6.710RD
That means, no RUU for you cause htc/sprint wasn't kind enough to provide the ruu. Also FYI you can't flash a ruu lower than your current one.
So your best bet is to flash the most stock 2.95 cdma rom you could find and right after, flash the stock cdma evo 3d kernel through fastboot or 4ext (I think 4ext smartflash does the same thing). Try to find something that's COMPLETELY STOCK - with no mods whatsoever or if you couldn't find any, try something that's almost* stock. That should get you booting and you can try s off again.
Click to expand...
Click to collapse
lsdyna said:
I ever run a RUU 1.13...exe for mmy phone, it said my device is having 1.000, and it tried to update to 1.13. However, the update procedure always failed at some point, some at beginning, some failed at 'wring signature'...
Click to expand...
Click to collapse
This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Flash like a normal rom and don't forget to flash the boot img because that's what's really causing you problems right now. I'd choose the deodexed one from there.
My HBoot screen shows below:
SHOOTER XC SHIP S-ON RL
HBOOT-1.58.000
RADIO-1.09.00.0108
OpenADSP-v02.6.0.2226.00.0217
DO you think I still have chance to save my device? Thanks a lot.
lsdyna said:
I ever run a RUU 1.13...exe for mmy phone, it said my device is having 1.000, and it tried to update to 1.13. However, the update procedure always failed at some point, some at beginning, some failed at 'wring signature'...
Click to expand...
Click to collapse
lsdyna said:
My HBoot screen shows below:
SHOOTER XC SHIP S-ON RL
HBOOT-1.58.000
RADIO-1.09.00.0108
OpenADSP-v02.6.0.2226.00.0217
DO you think I still have chance to save my device? Thanks a lot.
Click to expand...
Click to collapse
If you have access to the recovery, most likely, yes.
Hello MrJyrks,
Thank you so much for the link! I am eager to try that. Before I do that I think I shall ask two questions to avoid further mess up the device:
Question #1: To install the deodexed rom, which is the correct way:
(1) Rename the ZIP file to PG86IMG.ZIP, put to root of sdcard, then boot, letting the Bootloader to do the update.
(2) In 4EXT recovery, enable smartflash, enable script asserts, then install the zip from the root of sdcard.
Question #2: You said I shall flash boot image, can you tell me how to do this? I mean, where shall I get the boot image file? Flash it with 4EXT? SHall I do it before or after install ROM zip file?
Thank you very much for your helps!!!
MrJyrks said:
This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Flash like a normal rom and don't forget to flash the boot img because that's what's really causing you problems right now. I'd choose the deodexed one from there.
Click to expand...
Click to collapse
I tried install the stock ROM from your link (using 4EXT with smartflash enabled and script asserts enabled.) . Amazing that installation completed successfully (indeed this is the first ROM zip that I was able to install successfully since I mess up the device). When I exit After that, it did some further update which I guess is the boot.img that you mentioned.
4EXT it said 'a pending update for your boot partition is detected' and I think it was doing the boot image flash that you mentioned, right?
Unfortunately when I boo the device, I still got black screen.
Now I am unlocked and also rooted (since I successfully installed superuser in 4EXT). DO you think I shall lock the devioce before installing the stock ROM? If so, one possible issue is that if I relock the device, I found 4EXT is not available. In that case, how shall I install the ROM zip file?
Thanks.
MrJyrks said:
This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Flash like a normal rom and don't forget to flash the boot img because that's what's really causing you problems right now. I'd choose the deodexed one from there.
Click to expand...
Click to collapse
Further update:
I flashed boot image by: fastboot flash boot boot.img which is included in the stock ROM zip file.
The flash went successfully. However, I am still not able to boot to Android. WHat I have is the device hang there, alternatively displaying logo with white background, and black screen.
MrJyrks said:
This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Flash like a normal rom and don't forget to flash the boot img because that's what's really causing you problems right now. I'd choose the deodexed one from there.
Click to expand...
Click to collapse
I wiped cache and Dalvic, then re-flash the ROM, now I am able to boot as normal.
MrJyrks, you are my life save!!!
Your helps are sincerely appreciated !
lsdyna said:
I wiped cache and Dalvic, then re-flash the ROM, now I am able to boot as normal.
MrJyrks, you are my life save!!!
Your helps are sincerely appreciated !
Click to expand...
Click to collapse
You're welcome! I'm glad I could help!
---------- Post added at 12:02 PM ---------- Previous post was at 11:16 AM ----------
Oh, and if, in the future, you do try the wire trick and get stuck at some point you can revert the changes with ControlBear -r or ControlBear -f from command line. And you may also PM me if you need any help. Cheers!
MrJyrks, thank you so much!!!
MrJyrks said:
You're welcome! I'm glad I could help!
---------- Post added at 12:02 PM ---------- Previous post was at 11:16 AM ----------
Oh, and if, in the future, you do try the wire trick and get stuck at some point you can revert the changes with ControlBear -r or ControlBear -f from command line. And you may also PM me if you need any help. Cheers!
Click to expand...
Click to collapse
Similar problem, can't return to stock
I have a problem similar to lsdyna's, and am hoping that even though this post is old, MrJyrks or someone might be able to help me.
I am unsuccessfully trying to return my phone to stock. First a bit of history.
I had 2.95.651.6.710RD s-on hboot 1.58 Android Version: 4.03 HTC Sense version: 3.6 on my phone, and wanted root. I didn't need s-off, just wanted to root so could do some tweaking (stop some apps from autostarting, stop some form getting network access, etc.) so loaded 4EXT Recovery Touch, and got root (fastboot oem get_identifier_token method), got superuser in there, and happily began tweaking. Famous last words... I didn't make a backup right away (learned my lesson!) and suddenly found a 'overtweaked' sluggish phone on my hands.
Thought best thing would be to lose the root & return to stock & start over, carefully, making backups.
So I used Fastboot (fastboot oem lock) to lock it (worked) and proceeded to try to load RUU_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1.09.00.0706__NV_NV_SPCS_1.43_release_271101_signed.exe into it [via my computer], but didn't realize until reading MrJyrks post that a lower RUU couldn't be used.
I now am relocked (phone does boot up, but can tell the system tweaks are still slogging it), lost the recovery, and wondering what to do... do I try putting recovery back in & using the Negalite 2.95 stock deodex ROM MrJyrks mentioned? If so, how do I use that zip file method verses the exe one I tried thru my computer?
Thanks for the help
You had issues with the RUU because your main version is higher than that contained in the RUU.
Unlock, flash recovery again. Boot into recovery and flash this zip: https://copy.com/wlVvwssXXNN00Pe
That will lower your main version. Relock the bootloader, put the phone into fastboot USB mode, then run the RUU while in fastboot USB mode.
Should be back to stock after that.
I had already had my phone's bootloader unlocked and rooted and had a GPe ROM installed and worked perfectly. THEN I saw that you could literally make it a Google Play edition phone complete with OTA and worked on trying to achieve that. Getting my phone S-Off wasn't working because I believe of my HBOOT version (1.55) so I was told to download this stock ROM that would downgrade me to reach a version that I could then run revone to achieve S-OFF.
POST: http://forum.xda-developers.com/showpost.php?p=45487258&postcount=55
I ran a backup through TWRP first and then flahsed this ROM, which has kept my HTC One at the HTC One splash screen. I connected it to my computer/ADB and got it into the bootloader to go into custome recovery BUT the recovery takes me to a black screen with a phone and red triangle, so it's like my recovery isn't there anymore. Fine.
I download the latest TWRP for my phone(triple checked) and ran the fastboot flash recovery command through ADB but it says
"(bootloader) signature checking...FAILED (remote: signature verify fail)"
is there some sort of way to disable the signature check using ADB or am I actually going about this the wrong way?
I'll admit, I don't do this stuff oftem, so ask as many questions as needed as I probably left out details you may need
I may be wrong but you may have to re-lock the bootloader and run the ruu back to stock.
nandroid backup restore won't change the hboot so I don't think you'll have any luck there.
I'm running ARHD 40 just till we can find a way to run s-off on our AT&T devices.
noobsquared said:
I may be wrong but you may have to re-lock the bootloader and run the ruu back to stock.
nandroid backup restore won't change the hboot so I don't think you'll have any luck there.
I'm running ARHD 40 just till we can find a way to run s-off on our AT&T devices.
Click to expand...
Click to collapse
Not to sound n00b-ish, but what would be the best way of doing this?
EDIT: Actually it is relocked already! Duh! On the bootloader screen it says "TAMPERED" and then "RELOCKED" below that
That's alright, we were all noobs at some point in time.
Sounds like you re-locked the bootloader without stock recovery.
Here is the link:
http://forum.xda-developers.com/showthread.php?t=2158151
Download the cingular:
RUU_M7_UL_JB43_SENSE50_MR_Cingular_US_3.17.502.3_Radio_4A.19.3263.13_10.38j.1157.04_release_334235_signed_2.exe 1134.6MB 2013-10-07 16:47:53
Run the RUU from a windows based computer that has HTC drivers and it should restore it back to stock.
noobsquared said:
That's alright, we were all noobs at some point in time.
Sounds like you re-locked the bootloader without stock recovery.
Here is the link:
http://forum.xda-developers.com/showthread.php?t=2158151
Download the cingular:
RUU_M7_UL_JB43_SENSE50_MR_Cingular_US_3.17.502.3_Radio_4A.19.3263.13_10.38j.1157.04_release_334235_signed_2.exe 1134.6MB 2013-10-07 16:47:53
Run the RUU from a windows based computer that has HTC drivers and it should restore it back to stock.
Click to expand...
Click to collapse
I actually had that downloaded but I was just concerned if that was the right move since it wipes the phone.
noobsquared said:
That's alright, we were all noobs at some point in time.
Sounds like you re-locked the bootloader without stock recovery.
Here is the link:
http://forum.xda-developers.com/showthread.php?t=2158151
Download the cingular:
RUU_M7_UL_JB43_SENSE50_MR_Cingular_US_3.17.502.3_Radio_4A.19.3263.13_10.38j.1157.04_release_334235_signed_2.exe 1134.6MB 2013-10-07 16:47:53
Run the RUU from a windows based computer that has HTC drivers and it should restore it back to stock.
Click to expand...
Click to collapse
I hate to say this actually, but I can't find that .exe in the link. I don't know exactly what I'm looking for in it.
h_smith said:
I hate to say this actually, but I can't find that .exe in the link. I don't know exactly what I'm looking for in it.
Click to expand...
Click to collapse
Here you go:
http://www.androidruu.com/getdownlo...13_10.38j.1157.04_release_334235_signed_2.exe
You can always unlock the bootloader again, install twrp and try to boot and see if that works.
Install the nandroid backup matching your system and you can then get to your data.
noobsquared said:
You can always unlock the bootloader again, install twrp and try to boot and see if that works.
Install the nandroid backup matching your system and you can then get to your data.
Click to expand...
Click to collapse
But how would I do that if I can't even boot up the phone past the splash screen? I did all of the unlocking and TRWP installing via the phone
Downloading and installing the file right now. It's going slow as hell but I'll run when I get the chance
THANK YOU FOR STICKING WITH ME!
h_smith said:
But how would I do that if I can't even boot up the phone past the splash screen? I did all of the unlocking and TRWP installing via the phone
Downloading and installing the file right now. It's going slow as hell but I'll run when I get the chance
THANK YOU FOR STICKING WITH ME!
Click to expand...
Click to collapse
Sure thing man. It's stuck at that screen because when your phone is unlocked, it allows custom recovery but when it's locked, it won't boot unless it finds the stock recovery. I am not 100% sure but I've had that issue as well. I had to run the RUU to get back to stock since you can't lock the bootloader with custom recovery and expect it to boot. It may vary from device to device but I've always had to RUU back to stock or fastboot flash stock recovery to get past that screen before you lock the bootloader. You can try again, there is stock recovery posted by someone in forums. Download that, try to go in fastboot mode and try fastboot flash recovery recovery_name.img. I think once you've locked the bootloader it may not work but worth a shot.
noobsquared said:
Sure thing man. It's stuck at that screen because when your phone is unlocked, it allows custom recovery but when it's locked, it won't boot unless it finds the stock recovery. I am not 100% sure but I've had that issue as well. I had to run the RUU to get back to stock since you can't lock the bootloader with custom recovery and expect it to boot. It may vary from device to device but I've always had to RUU back to stock or fastboot flash stock recovery to get past that screen before you lock the bootloader. You can try again, there is stock recovery posted by someone in forums. Download that, try to go in fastboot mode and try fastboot flash recovery recovery_name.img. I think once you've locked the bootloader it may not work but worth a shot.
Click to expand...
Click to collapse
Thank you. I'm downloading the .exe and will post the results. But it looks like that might take a few hours :/
hey is there another link? that one is so slow and keeps timing out :/
You can either use download manager or chrome browser is pretty good at managing that.
Try this: http://d-h.st/VWf
---------- Post added at 06:31 PM ---------- Previous post was at 06:30 PM ----------
I just did a google search for the term RUU_M7_UL_JB43_SENSE50_MR_Cingular_US_3.17.502.3_R and gave you the second result I got. Just search for the name of the file and you will find plenty of links.
Hope that helps.
This sounds like the exact same problem I had. The RUU and directions solved that one for me too...
Link to RUU: http://www.htc.com/us/support/news.aspx?p_id=628&p_name=htc-one-att
Other thread: http://forum.xda-developers.com/showthread.php?t=2492266
THANK YOU NOOB!!
I managed to get it fixed. Turns out HTC hosted that exact file so I downloaded it and it fixed my phone. Good times..
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
mhnx said:
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
Click to expand...
Click to collapse
Hi there, I didn't know with having the bootloader unlocked that it would cause any issues, but there you go!
Yeah, if there's a guide to flashing the 4EXT Recovery and a custom rom that would be great!
I have a fair idea of how to do it, but don't want to try anything without having someone of greater knowledge point me in the right direction
Thanks!
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
skylirizm said:
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
Click to expand...
Click to collapse
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
mhnx said:
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
Click to expand...
Click to collapse
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
skylirizm said:
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
Click to expand...
Click to collapse
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
mhnx said:
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
Click to expand...
Click to collapse
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
skylirizm said:
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
Click to expand...
Click to collapse
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
mhnx said:
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
Click to expand...
Click to collapse
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
skylirizm said:
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
Click to expand...
Click to collapse
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
mhnx said:
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
Click to expand...
Click to collapse
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
skylirizm said:
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
Click to expand...
Click to collapse
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
Oh that would be extremely helpful, I can use Linux, but prefer my Windows PC as it has all the files and it's just easier.
Thanks so much!
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
skylirizm said:
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
Click to expand...
Click to collapse
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
skylirizm said:
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
Click to expand...
Click to collapse
Try doing:
fastboot erase recovery
fastboot flash recovery "recovery".img
fastboot format system
fastboot format boot
And if it still doesn't let me send you a boot.img in some minutes to try flashing it.
EDIT: And something last, you can still do the controlbear trick while not in OS, its easy if you wanna try let me know.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
i have same problem plz give me GB rom link and flash method
---------- Post added at 07:56 AM ---------- Previous post was at 07:42 AM ----------
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
plz help my htc evo 3d is bootloop no go to any recovery mode i flash all recovery
BOOTLOADER-UNLOCK
HBOOT-1.53.0007
RADIO-11.25.3504.06.M
i flash many ruu.exe but this
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Radio_11.77.3504.00U_11.25.3
flash seccussfully without any error but no booting only htc logo plz help