The whole time that i have had the rezound i have had problems with the cpu settings sticking, and i read somewhere that using a script to set it works best. would this work? http://forum.xda-developers.com/showthread.php?t=1584508. and also since I have not really had luck with them sticking i would like to know what you guys think is the best governor, i was probably going to use smartassv2, wheatley, or pegesusq, but im not sure if they are the best for performance and all the explanations of them dont really tell if they perform in real life. Im looking for mostly performance, but i dont want something that will destroy my battery
edit: that link doesnt work, the download is missing, so what is a different way?
Why would you want a CPU governer if it wasn't to help with your battery life?
GrayTheWolf said:
Why would you want a CPU governer if it wasn't to help with your battery life?
Click to expand...
Click to collapse
to overclock it to get better performance
xxtsxx said:
to overclock it to get better performance
Click to expand...
Click to collapse
You need an overclocked kernel to do that.
GrayTheWolf said:
You need an overclocked kernel to do that.
Click to expand...
Click to collapse
well yeah i have that, im running cubed ics kernel 2.3.5, and i just want a better way to make my overclock stick and which governor will give the best performance without completely using up the battery, kind of a happy medium but leaning a little more towards performance. I guess I didnt explain that good enough
xxtsxx said:
well yeah i have that, im running cubed ics kernel 2.3.5, and i just want a better way to make my overclock stick and which governor will give the best performance without completely using up the battery, kind of a happy medium but leaning a little more towards performance. I guess I didnt explain that good enough
Click to expand...
Click to collapse
These are a bit dated and from another phone, but can provide a bit of insight into kernel governors and their behavior. Keep in mind a few technical points are different for our phone (different min/max clock speeds) but much is the same in general.
tl;dr Smartassv2 should meet your needs as a top performer while still gaining some battery savings. Try with noop or sio I/O scheduler. A modest undervolt, but avoid pushing it.
Kernel Features and Benchmarks
Battery Saving Governor Benchmarks
Battery Drain Benchmarks
PhantasmRezound said:
These are a bit dated and from another phone, but can provide a bit of insight into kernel governors and their behavior. Keep in mind a few technical points are different for our phone (different min/max clock speeds) but much is the same in general.
tl;dr Smartassv2 should meet your needs as a top performer while still gaining some battery savings. Try with noop or sio I/O scheduler. A modest undervolt, but avoid pushing it.
Kernel Features and Benchmarks
Battery Saving Governor Benchmarks
Battery Drain Benchmarks
Click to expand...
Click to collapse
hey thanks for all that info
I have no problems keeping my Governor (Wheatly) set with System Tuner using the set CPU preference to remember after boot complete.
Related
Hi,
Since we can add the smartass module developped for the X8, I wonder what are the pros/cons of smartass vs. ondemand, as regards energy consumption and performance.
If there's already information about that, feel free to point me to the source. But don't hesitate to give me your opinnion based on your experience.
SebbyNC
sebbync said:
Hi,
Since we can add the smartass module developped for the X8, I wonder what are the pros/cons of smartass vs. ondemand, as regards energy consumption and performance.
If there's already information about that, feel free to point me to the source. But don't hesitate to give me your opinnion based on your experience.
SebbyNC
Click to expand...
Click to collapse
Rudimentary comparisons:
Generally:
Performance: Smartass < Ondemand
Battery life: Smartass > Ondemand
Cheers
SpyderX
Remember to set correct settings for smartass.
Thanks SpyderX, in your comparison is there any way to have an idea about how much one is better than the other (5% or 25% advantage or disadvantage....) ?
sebbync said:
Thanks SpyderX, in your comparison is there any way to have an idea about how much one is better than the other (5% or 25% advantage or disadvantage....) ?
Click to expand...
Click to collapse
No. But battery life can last a whole day more using smartass and moderate use. As for performance smartass governor will cause minor lag on opening apps etc.
Hi, i have just flashed the new HyperDroid v5.2.21 (Full wipe) and i wanted to know if i can overclock my SGS2 from 1.2ghz to 1.5ghz, if so how do i go about it?
Do i need to change the current kernel (XWL1)?
P.S ive heard its stable, but does it drain the battery?
Thanks XDA Community
Hello there. Yep you can overclock but you need a kernel that supports it. [url="http://gokhanmoral.com]SiyahKernel[/url] is a good choice. With that, use the Voltage Control app from the market.
However I know nothing about battery draining or stability... dualcore 1.2GHz mobile processor is more than enough for me, and the phone can get pretty hot under maximum load, same with the MALI GPU which can be overclocked to 400MHz (but since it has 4 cores and the phone has no active heatsinks it could get risky...)
AJ.Rockwell said:
Hello there. Yep you can overclock but you need a kernel that supports it. [url="http://gokhanmoral.com]SiyahKernel[/url] is a good choice. With that, use the Voltage Control app from the market.
However I know nothing about battery draining or stability... dualcore 1.2GHz mobile processor is more than enough for me, and the phone can get pretty hot under maximum load, same with the MALI GPU which can be overclocked to 400MHz (but since it has 4 cores and the phone has no active heatsinks it could get risky...)
Click to expand...
Click to collapse
I think AndroidMeda kernel already supports OverClocking...using this ROM for a quite long time...
Harvinder09 said:
Hi, i have just flashed the new HyperDroid v5.2.21 (Full wipe) and i wanted to know if i can overclock my SGS2 from 1.2ghz to 1.5ghz, if so how do i go about it?
Do i need to change the current kernel (XWL1)?
P.S ive heard its stable, but does it drain the battery?
Thanks XDA Community
Click to expand...
Click to collapse
Yes you can overclock and you can stick with the kernel that comes with Hyperdroid. I am currently Overclocking 1.6ghz max and 200 min. Not touching voltages though. Use No-Frills app to set it up. My advice though to you no point in overclocking as 1.2ghz is good enough as it is..And the kernel you are on is good enough...It is stable depending what voltage frequencies you use..I say leave it as they are. And like i said download No-Frills from the market..Set your clock speeds and that should be it..Choose a governor and off you go
Neo3000 said:
Yes you can overclock and you can stick with the kernel that comes with Hyperdroid. I am currently Overclocking 1.6ghz max and 200 min. Not touching voltages though. Use No-Frills app to set it up. My advice though to you no point in overclocking as 1.2ghz is good enough as it is..And the kernel you are on is good enough...It is stable depending what voltage frequencies you use..I say leave it as they are. And like i said download No-Frills from the market..Set your clock speeds and that should be it..Choose a governor and off you go
Click to expand...
Click to collapse
No-Frills ? AndroidMeda Developers recommend Voltage Control (and I personally like it much more than No-Frills, too) with their kernel.
+ Here is a small guide : http://forum.xda-developers.com/showthread.php?t=1036020 how to test your OC Settings, I use it when I am testing new voltages.
Thanks for the replies i will try out the no-frills app and see what happens. What would you say is the best governor to use? and wouldnt you recommend going over 200min?
DomButcher said:
No-Frills ? AndroidMeda Developers recommend Voltage Control (and I personally like it much more than No-Frills, too) with their kernel.
+ Here is small guide : http://forum.xda-developers.com/showthread.php?t=1036020 how to test your OC Settings, I use it when I am testing new voltages.
Click to expand...
Click to collapse
Pongster uses No-Frills. The rest of the team uses Voltage Control. And to avoid any freezes or random reboots leave the voltage settings as they are till you get to grips with the overclocking. Hence why i suggested No-Frills as currently Voltage Control for me kept on reverting back to stock frequencies..And yes there is a way round it but it is to much of an effort
Harvinder09 said:
Thanks for the replies i will try out the no-frills app and see what happens. What would you say is the best governor to use? and wouldnt you recommend going over 200min?
Click to expand...
Click to collapse
I am currently using ondemand and Sio as scheduler. You can not go wrong with that. Like i said..choose a governor choose a scheduler and let them do the work...I also do recommend Voltage control but No-frills is simple and does the job for you. And no i would recommend either go to 100min or stick with 200...I am currently on 1.6max and 200 min
Harvinder09 said:
Thanks for the replies i will try out the no-frills app and see what happens. What would you say is the best governor to use? and wouldnt you recommend going over 200min?
Click to expand...
Click to collapse
I personally use Sleepy governor and noop scheduler, but everyone uses different governors and schedulers...
I think 200 min is OK...100 MHz is too low and 500 is too high...
Neo3000 said:
Pongster uses No-Frills. The rest of the team uses Voltage Control. And to avoid any freezes or random reboots leave the voltage settings as they are till you get to grips with the overclocking. Hence why i suggested No-Frills as currently Voltage Control for me kept on reverting back to stock frequencies..And yes there is a way round it but it is to much of an effort
Click to expand...
Click to collapse
I have -75mV (previously had -50mV) and I haven't ever had any freeze or random reboot...
DomButcher said:
I personally use Sleepy governor and noop scheduler, but everyone uses different governors and schedulers...
I think 200 min is OK...100 MHz is too low and 500 is too high...
I have -75mV (previously had -50mV) and I haven't ever had any freeze or random reboot...
Click to expand...
Click to collapse
Dude..he is just learning...let him take baby steps first before he jumps right up and wants to walk.... Let him follow what i suggested and then he can come back and ask for more help once he tries his new settings out...I remember you use to ask a lot of questions before..And i said the same thing..baby steps first before you start walking
Neo3000 said:
Dude..he is just learning...let him take baby steps first before he jumps right up and wants to walk.... Let him follow what i suggested and then he can come back and ask for more help once he tries his new settings out...I remember you use to ask a lot of questions before..And i said the same thing..baby steps first before you start walking
Click to expand...
Click to collapse
Oh...he has just 6 posts...I didn't notice it...sorry. Then I will suggest No-Frills, too.
DomButcher said:
Oh...he has just 6 posts...I didn't notice it...sorry. Then I will suggest No-Frills, too.
Click to expand...
Click to collapse
Good..Now thanks wont hurt
Thanks for the support guys, and yeah i am new to this whole android/rooting scene so no-frills looks like a nice simple and easy option for now until i get to grips with things. i will try out the differen governors and schedulers and see whats best for me.
P.S Neo is yours running stable at the maximum 1.6ghz?
Harvinder09 said:
Thanks for the support guys, and yeah i am new to this whole android/rooting scene so no-frills looks like a nice simple and easy option for now until i get to grips with things. i will try out the differen governors and schedulers and see whats best for me.
P.S Neo is yours running stable at the maximum 1.6ghz?
Click to expand...
Click to collapse
Yes my friend pretty stable. Listen go here http://forum.xda-developers.com/showthread.php?t=1369817 and read regarding governors and schedulers..Pretty straight forward and good explanations...And i am running the latest hyperdroid version but i am using Siyah kernel with thunderbolt tweaks...For you i would use the kernel that comes with the rom and use the default governor that comes with the rom...When i was on previous kernel version i always use to use Kenobi...Not sure if they have it there or if Pongs removed it but either that or solo...
Neo3000 said:
Yes my friend pretty stable. Listen go here http://forum.xda-developers.com/showthread.php?t=1369817 and read regarding governors and schedulers..Pretty straight forward and good explanations...And i am running the latest hyperdroid version but i am using Siyah kernel with thunderbolt tweaks...For you i would use the kernel that comes with the rom and use the default governor that comes with the rom...When i was on previous kernel version i always use to use Kenobi...Not sure if they have it there or if Pongs removed it but either that or solo...
Click to expand...
Click to collapse
Kenobi was removed and solo was renamed to sleepy.
which governer is best with overclocking 1.6ghz
mzeshanhakeem said:
which governer is best with overclocking 1.6ghz
Click to expand...
Click to collapse
i am using ondemand
Neo3000 said:
i am using ondemand
Click to expand...
Click to collapse
Neo when i overclock to 1.6ghz with 200min using the lulzactive governer and SIO scheduler my phone freezes i have to reboot it?
whats the best setup to run 1.6ghz so its stable for everyday use?
P.S anyone know if it drains the battery by overclocking?
Harvinder09 said:
Neo when i overclock to 1.6ghz with 200min using the lulzactive governer and SIO scheduler my phone freezes i have to reboot it?
whats the best setup to run 1.6ghz so its stable for everyday use?
P.S anyone know if it drains the battery by overclocking?
Click to expand...
Click to collapse
change to ondemand governor when overclocking
Neo3000 said:
change to ondemand governor when overclocking
Click to expand...
Click to collapse
And what scheduler?
Thanks
Harvinder09 said:
And what scheduler?
Thanks
Click to expand...
Click to collapse
stick with SIO
alright. ive been playing around and cant find some good governors for what i want.
for hardcore gaming, what governor have you found that works the best
for best batter saving, but still be able to watch videos, surf web, email and just general navigating without it being too slow.
which governors do you guys use for both of those? thanks
Quadrider10 said:
alright. ive been playing around and cant find some good governors for what i want.
for hardcore gaming, what governor have you found that works the best
for best batter saving, but still be able to watch videos, surf web, email and just general navigating without it being too slow.
which governors do you guys use for both of those? thanks
Click to expand...
Click to collapse
anyone?
Use the smartassV2 governor. It regulates the CPU frequency according to load (sorta like ondemand except it works better).
darkghost568 said:
Use the smartassV2 governor. It regulates the CPU frequency according to load (sorta like ondemand except it works better).
Click to expand...
Click to collapse
i tried and i liked it, but it like locked my cpu at 1.24ghz (thats the max i have it set to) and even if i changed it, it would lock to the max frequency????
Quadrider10 said:
i tried and i liked it, but it like locked my cpu at 1.24ghz (thats the max i have it set to) and even if i changed it, it would lock to the max frequency????
Click to expand...
Click to collapse
I'll have v1 of Funky kernel out soon if you want to try out wheatley.
I've been a fan of smartassV2 since the first time I used it on the Thunderbolt. It is as close to an ideal governor as I've ever used. SmartassV2, with a complete sysfs implementation, can be tweaked very nicely. It is a governor that you can really tune so that most of the time it's not running balls out, but it's not loafing along either, which is how a governor SHOULD function. (I like to see a nice bell curve peaking at an ideal frequency, and spiked way out at the bottom frequencies when I look at a bar chart of my time-in-state's.) From what I can tell, few if any devs tune their governors to their kernels. I'm thinking that's how we ended up with a dozen or so governors that are rather similar, yet rarely ideal.
Snuzzo said:
I'll have v1 of Funky kernel out soon if you want to try out wheatley.
Click to expand...
Click to collapse
Wheatley is epic.
Sent from my Rezound using Tapatalk 2
loonatik78 said:
I've been a fan of smartassV2 since the first time I used it on the Thunderbolt. It is as close to an ideal governor as I've ever used. SmartassV2, with a complete sysfs implementation, can be tweaked very nicely. It is a governor that you can really tune so that most of the time it's not running balls out, but it's not loafing along either, which is how a governor SHOULD function. (I like to see a nice bell curve peaking at an ideal frequency, and spiked way out at the bottom frequencies when I look at a bar chart of my time-in-state's.) From what I can tell, few if any devs tune their governors to their kernels. I'm thinking that's how we ended up with a dozen or so governors that are rather similar, yet rarely ideal.
Click to expand...
Click to collapse
Alright now my problem is that I set my CPU to 192mhz lowest and 1.24 max. And that's for normal use. I'm running smart ass2 Nd it's not licking my CPU at max anymore, but it keeps.moving the max to 1.51ghz.
any ideas on how to fix tht?
Quadrider10 said:
any ideas on how to fix tht?
Click to expand...
Click to collapse
No frills CPU in play store
Sent from my ADR6425LVW using Tapatalk 2
Quadrider10 said:
Alright now my problem is that I set my CPU to 192mhz lowest and 1.24 max. And that's for normal use. I'm running smart ass2 Nd it's not licking my CPU at max anymore, but it keeps.moving the max to 1.51ghz.
Click to expand...
Click to collapse
Quadrider10 said:
any ideas on how to fix tht?
Click to expand...
Click to collapse
Yeah. Don't use DSB's kernel. I spent DAYS trying to figure out what his kernel is trying to do as far as governors. I'm not going to talk smack about the guy's work, but I will tell you what I know.
I doesn't appear any of the governors have been tweaked for his kernel. It looks like code was just tossed in there and left however someone else wrote it. For instance, smartassV2 has a sleep_wakup_freq of .998GHz, which is much slower than it should be. It SHOULD be near or equal to scaling_max_freq. Likewise, the max_cpu_load (which determines when the cpu should scale up) is 70, a fairly aggressive number, while the awake_ideal_freq and sleep_ideal_freq are pointlessly high. If I had to guess, these look like parameters for a Snapdragon S1 SoC, not the dual core S3 the Rezound has. No matter what governor you choose, it's only active on "cpu0". "cpu1" runs ondemand no matter what. The reason you have trouble making settings for the governor stick is because the sysfs location disappears and reappears for no obvious reason. It appears when things pop in and out (presumably when cpu1 goes on and off line), things are reset.
Cold hard reality is this: You're NEVER going to optimize any kernel out there to it's fullest potential. Either the options aren't there to tweak, or they behave in inexplicable ways. I can't tell you why DSB's kernel (not to single out a dev or his work, but I'm certain that's the kernel you're talking about) does what it does, but it's so far divorced from optimized on such basic levels you're better off not wasting your time.
As an aside:
After getting a rough feel for what some of these kernels are doing, I'm not at all surprised some kernels have had significant heat and battery drain issues. There are things that simply do not work right or work consistently. The devs shouldn't be blamed for this. These are probably the issues they're trying to work around that they inherited from the sources they're starting from and what makes tweaking them so difficult.
I acutely got everything to work. I'm just trying to overclock the GPU.
Hello all
I have a bit of a small problem. I like to run my phone using the Performance Governor but after a while it goes to 1Ghz on all 4 cores despite me running it at 1.8Ghz. Setting it back seems to correct the issue but in time it goes down again.
I believe it is getting a bit warm and thus it hits a limit and the system auto slows to 1Ghz.
Can anyone confirm this behaviour? It never happened to me before but I have had a few kernel updates and updates to the Omega ROM that could be the cause but I am not sure. Is there a setting where I can tell my phone what temps to throttle at?
Also, I assume all this is down to the Kernel and not the ROMs?
Would like some imput regards where to start my search to return my phone to its previous state as a pocket heater.
Many Thanks
Syl
. I like to run my phone using the Performance Governor
Click to expand...
Click to collapse
Don't use it. Pegasusq is the only one really working for multi-core CPU's with hotplugging and so on.
but after a while it goes to 1Ghz on all 4 cores despite me running it at 1.8Ghz.
Click to expand...
Click to collapse
1.8Ghz is not healthy for the CPU in the long run and will cause overheating which is exactly what you are currently seeing.
Especially since you keep the phone on 100% CPU power all the time (performance governor) which should drain battery like hell as a side effect.
Also, I assume all this is down to the Kernel and not the ROMs?
Click to expand...
Click to collapse
This is down to your settings. Neither rom nor kernel.
- Don't overclock (much)
-Use a good kernel such as Siyah
-Undervolt if the phone remains stable
-Use pegasusq Governor
-Enjoy
d4fseeker said:
Don't use it. Pegasusq is the only one really working for multi-core CPU's with hotplugging and so on.
1.8Ghz is not healthy for the CPU in the long run and will cause overheating which is exactly what you are currently seeing.
Especially since you keep the phone on 100% CPU power all the time (performance governor) which should drain battery like hell as a side effect.
This is down to your settings. Neither rom nor kernel.
- Don't overclock (much)
-Use a good kernel such as Siyah
-Undervolt if the phone remains stable
-Use pegasusq Governor
-Enjoy
Click to expand...
Click to collapse
Hi buddy and thanks for your response.
I am not sure about what you said regarding it working correctly, it gets the best results for any benchmark compared to others so I would be interested in more detail about the specifics of how its not working correctly as I have never been told that. It would be appreciated.
I dont mind the battery drain although I do heed your warning about about longevity of the CPU.
I have been using Siyah Kernel for some time now and I find undervolting a little unstable, for now I am forced to use pegasusq.
Can you or anyone else answer the original question as I still wish to pursue this to a resolve other than not using it.
Many thanks for your time and efforts non the less!
Syl
SyLvEsTeR20007 said:
Hi buddy and thanks for your response.
I am not sure about what you said regarding it working correctly, it gets the best results for any benchmark compared to others so I would be interested in more detail about the specifics of how its not working correctly as I have never been told that. It would be appreciated.
I dont mind the battery drain although I do heed your warning about about longevity of the CPU.
I have been using Siyah Kernel for some time now and I find undervolting a little unstable, for now I am forced to use pegasusq.
Can you or anyone else answer the original question as I still wish to pursue this to a resolve other than not using it.
Many thanks for your time and efforts non the less!
Syl
Click to expand...
Click to collapse
it´s samsung´s based roms related: when the battery temp hits 41C the cpu will throttle. Nothing related with de cpu temp (can be at 80C before throttles).
try CM10.1 and you´ll see what im talking about.
We need a solution for this throttling with samsung based roms
Hi all, I'm happy with LOS performance during light and medium tasks, but my device stutters more than I'd like during heavy tasks (e.g. maps, waze, etc) and app switching. Since battery life has been great, I'm willing to sacrifice some SOT for a more buttery UX. If that's even possible...
I started by changing performance profile from balanced mode to performance mode... and I can honestly say I don't notice a difference.
Now I'm just starting to experiment with changing the CPU and GPU governors using Kernel Adiutor. I've changed both little/big CPUs and GPU from interactive to performance. I'm not sure how to measure the results, but my feeling is that all around performance has increased, but the device still struggles with heavy tasks and app switching.
Anyone else have success tweaking? Please share your methods
JT-on said:
Anyone else have success tweaking? Please share your methods
Click to expand...
Click to collapse
Hi,
Use may be a custom kernel to tweak more.
And here a thread to know about tweaks:
https://forum.xda-developers.com/general/general/ref-to-date-guide-cpu-governors-o-t3048957
The best perf i got is with CPU gov bluactiv and io schedulers tripndroid.
But i did not tweaks all possible values.
I guess a lag will always be present as we have 2gb RAM phone
Disable fsync, set governor to darkness and scheduler to maple.
JT-on said:
Hi all, I'm happy with LOS performance during light and medium tasks, but my device stutters more than I'd like during heavy tasks (e.g. maps, waze, etc) and app switching. Since battery life has been great, I'm willing to sacrifice some SOT for a more buttery UX. If that's even possible...
I started by changing performance profile from balanced mode to performance mode... and I can honestly say I don't notice a difference.
Now I'm just starting to experiment with changing the CPU and GPU governors using Kernel Adiutor. I've changed both little/big CPUs and GPU from interactive to performance. I'm not sure how to measure the results, but my feeling is that all around performance has increased, but the device still struggles with heavy tasks and app switching.
Anyone else have success tweaking? Please share your methods
Click to expand...
Click to collapse
you can use custom kernel and increase performance
i set my governers to lionfish and disable fsync and i/o sceduler to maple its works great
chrisleLP said:
Disable fsync, set governor to darkness and scheduler to maple.
Click to expand...
Click to collapse
alimir98 said:
you can use custom kernel and increase performance
i set my governers to lionfish and disable fsync and i/o sceduler to maple its works great
Click to expand...
Click to collapse
Thanks both for the replies. What kernel do you use? And is there a trade-off when disabling fsync?
JT-on said:
Thanks both for the replies. What kernel do you use? And is there a trade-off when disabling fsync?
Click to expand...
Click to collapse
You can search for it for more info. But TL;DR, fsync prevents data loss when a sudden power outage happens. For example, you are saving something then you accidentally restart your phone for some reason, there is a chance, repeat, a chance of data loss. A whole year of having it disabled, I haven't had any loss.
chrisleLP said:
You can search for it for more info. But TL;DR, fsync prevents data loss when a sudden power outage happens. For example, you are saving something then you accidentally restart your phone for some reason, there is a chance, repeat, a chance of data loss. A whole year of having it disabled, I haven't had any loss.
Click to expand...
Click to collapse
Was working in parallel thanks for the TL;DR. For anyone following this thread, here's more info fsync https://forum.xda-developers.com/showthread.php?t=2244162.
JT-on said:
Was working in parallel thanks for the TL;DR. For anyone following this thread, here's more info fsync https://forum.xda-developers.com/showthread.php?t=2244162.
Click to expand...
Click to collapse
You are very much welcome.
JT-on said:
Thanks both for the replies. What kernel do you use? And is there a trade-off when disabling fsync?
Click to expand...
Click to collapse
using HD kernel with spectrum..its pretty good,,
new Astral kernel is looking good..its in beta stage but working perfectly fine
JT-on said:
Hi all, I'm happy with LOS performance during light and medium tasks, but my device stutters more than I'd like during heavy tasks (e.g. maps, waze, etc) and app switching. Since battery life has been great, I'm willing to sacrifice some SOT for a more buttery UX. If that's even possible...
I started by changing performance profile from balanced mode to performance mode... and I can honestly say I don't notice a difference.
Now I'm just starting to experiment with changing the CPU and GPU governors using Kernel Adiutor. I've changed both little/big CPUs and GPU from interactive to performance. I'm not sure how to measure the results, but my feeling is that all around performance has increased, but the device still struggles with heavy tasks and app switching.
Anyone else have success tweaking? Please share your methods
Click to expand...
Click to collapse
changing data and cache partition to f2fs make it really smooth.
and with HD kernel it makes it even smoother.
Again for anyone following, here's a link to popular HD kernel for Honor 5x, https://forum.xda-developers.com/honor-5x/development/kernel-hotdog-2-0-1-t3544887
While gaming, set the governor to performance for maximum smoothness.