[Q] Who can pass me 2.3.4 ROMs - Galaxy S II Q&A, Help & Troubleshooting

Hi everyone, I really need a 2.3.4 ROM, doesnt matter if stock or modded.
If you are willing to help me, because links are broken

www.sammobile.com should have plenty on there.

I got mine from here http://www.droidevelopers.com/forumdisplay.php?364-GT-I9100-Galaxy-S-II-GT-I9100G-T-P.

Thank you Sir, You saved my life, sammobile is almost broken, download links are down too!, thanks btw droiddevelopers ftw!

Related

Ginger bread 2.3.4

Hi Guys
I would like to go back to gingerbread 2.3.4 from ICS 4.0.3.
have youse got any idea on where i can get this done? i asked one phone repair shop and he said he can do it for £15 which is a bit too much for me.
also my phone isn't rooted.
if youse need any more info plz let me know thanks.
use odin and downlode gb stock frm samfirmware.com and flash ....there r lots of thread for begginers on this...
you can also find stock roms from my link on signature and Odin flash guide in the same thread

Looking for stock rom ZSKI3

I'm looking to download stock rom XXKI3. I need to return my I900 to the store and want to restore the firmware I had when I bought the phone. I am currently using MIUI v4 and don't want any hassle from the staff.
I am living in China and have only had the phone for 2 days. I noticed that the screen has screen burn/ ghosting, It's not very obvious, but after loading a pure blue image I can make out some of the display, and it looks like either a Chinese/ Korean keypad. I would assume then that the phone I got has been used before me, either by someone, or on display, which I am obviously not happy about.
I don't want to give them any reason to not give me a replacement phone.
All the links online I can find are dead, if anyone has it or knows where I can get it, I would much appreciate the help.
I have the files for Odin. Let me upload them and I'll post you a link!
SGS2
booshman said:
I'm looking to download stock rom XXKI3. I need to return my I900 to the store and want to restore the firmware I had when I bought the phone. I am currently using MIUI v4 and don't want any hassle from the staff.
I am living in China and have only had the phone for 2 days. I noticed that the screen has screen burn/ ghosting, It's not very obvious, but after loading a pure blue image I can make out some of the display, and it looks like either a Chinese/ Korean keypad. I would assume then that the phone I got has been used before me, either by someone, or on display, which I am obviously not happy about.
I don't want to give them any reason to not give me a replacement phone.
All the links online I can find are dead, if anyone has it or knows where I can get it, I would much appreciate the help.
Click to expand...
Click to collapse
Try www.sammobile.com
Sent from my GT-P7510 using xda premium
Here's the download link:
http://androidfirmwares.net/PhoneFirmware/Download/20
Extract and flash in Odin.
Sent from my GT-I9100 using Tapatalk 2
booshman said:
I'm looking to download stock rom XXKI3. I need to return my I900 to the store and want to restore the firmware I had when I bought the phone. I am currently using MIUI v4 and don't want any hassle from the staff.
.
Click to expand...
Click to collapse
This one? http://www.sammobile.com/firmware/?page=8&view=447
Thanks for all the replies! Oh man do I feel dumb, I posted the wrong code, it's actually ZSKI3 I need.
XXKI3 doesn't have the Chinese language, which they will no doubt try to switch the phone to when I take it in.
I can't find ZSKI3 on sammobile or anywhere on google. The link on the firmwares page on this site is dead too.
Any ideas?
Found it!
http(colon)//pan(dot)baidu(dot)com/netdisk/singlepublic?fid=634651_3400984520
booshman said:
Found it!
http(colon)//pan(dot)baidu(dot)com/netdisk/singlepublic?fid=634651_3400984520
Click to expand...
Click to collapse
many thanks! i need that rom too
i upgraded my phone to 4.0.3 accidentially (kies prompted me to upgrade when i connect my phone to the PC, and i clicked the button to confirm the action wrongly)
since then, my phone sucks, hangs and crashed with some apps, even after i reset to the factory setting (cleared all the data!!!!)
now, my phone is likely to hang up, while i installed apk files (but it is ok to install app directly from google play) (the apk files are ok in the previous ver of andriod and should be the same as the one if i download them from google play directly)
so i decided to revert back to 2.3.5..................and would not upgrade the firmware again..................
Trying to flash to stock HK firmware since encountering a boot loop
I wasn't sure if I was in the right thread so I originally posted on here:
[Q] How to flash the original ROM?(HK official ROM)
http://forum.xda-developers.com/showthread.php?p=31073452#post31073452
Hope everyone doesn't mind me posting some questions on this thread too.
I am trying to figure out which official stock firmware for Hong Kong I should use (ZSKF1, ZSKF4, ZSKG2, ZSKI3) since I can no longer access settings on my phone due to the boot loop error. I am basically guessing since I cannot remember the exact kernel version or any other info. I am trying my best to make more educated guesses. I know I got my phone from Hong Kong in Nov 2011.
First I am trying to follow the instructions on this thread for the boot loop error. It requires me to find the stock rom I want to flash to. So I am working on finding the correct stock rom.
[READ THIS] Got a Boot Loop? Don't post a New Thread!
http://forum.xda-developers.com/showthread.php?t=1108499
I was getting lost in the list of them on here. But I narrowed it the the 4 I picked out with code ZS for China, Hong Kong.
[ROM+Guide] Official i9100 Firmwares LPE/Q/7/2/F/S/4/7/G/9/W/D/F Download
http://forum.xda-developers.com/showthread.php?t=1075278
For booshman:
The file you gave on this thread, it is for ZSKI3 but how do I know if it is right for my case? Will it restore to GT-i9100 Android 2.3.5 Gingerbread for Hong Kong stock rom? I had no custom roms and was running from the stock all the way through and I still encountered the boot loop error.
I already tried going on samfirmware but they only had Android ver 4 for Hong Kong. I want to restore my phone to exactly what I had before which is Gingerbread and start anew from there.
If anyone can give me some insights, that will be greatly appreciated!
Thank you all!!
I figured it all out! I got out of boot loop! No need for response. Sorry for spamming everyone...
Just wanted to say:
This page helped me to do it. I gave appropriate thanks!
[GUIDE] Fix an unflashable or soft bricked GSII (I9100G/M/P/T VERSION INCLUDED!)
http://forum.xda-developers.com/showthread.php?t=1457458&page=1

[Q] Atrix 4G Stock Kernel

Hi all,
I've been trying to find the stock kernels for International Unified Atrix 4G, but all I find is a broken link. Does anyone could help me on get this? All links I find over the internet point to these links (extracted from XDA post http://forum.xda-developers.com/showthread.php?t=1156040), but they don't work:
http://www.multiupload.nl/VQCGG43Z3X
http://www.multiupload.nl/7REA93ZBSX
Anyways, I want to put my phone back to stock, since I've installed any ROM that massed up my RAM, it only shows 372MB instead of 800~.
Looking at a lot of links at internet, I finally found out that I can restore a stock ROM with all included (even kernel). For me, the links below helped a lot:
plusgsm.com.br/threads/rom-atrix-rom-2-3-6-retail-e-todas-as-operadoras-do-brasil.108348/
androidurbano.com/2012/02/26/tutorial-retornando-seu-atrix-para-o-android-original/
Hope it can be helpful to someone else too

Wrong rom on my gt-i9300

Hi! it is my firts post here, im desperate for help!!
I got a s3 i9300, i want to flash my device to get a unbranded version, the problem was that i install a sch-535 rom, the phone barely works, i cant use data, i barely have signal, but when i reallyze my error i try to flash an i9300 rom but i cant, it stops in the middle and dont let me do it, so i know im stupid, but i really need to fix this, anyone can help me please? thank you guys!
poyotpm said:
Hi! it is my firts post here, im desperate for help!!
I got a s3 i9300, i want to flash my device to get a unbranded version, the problem was that i install a sch-535 rom, the phone barely works, i cant use data, i barely have signal, but when i reallyze my error i try to flash an i9300 rom but i cant, it stops in the middle and dont let me do it, so i know im stupid, but i really need to fix this, anyone can help me please? thank you guys!
Click to expand...
Click to collapse
hi dude,
I will not do a tutorial or how to, or explain, but there is excellent and complete informations and threads from others members in XDA or youtube or other forums
for stock fw search it from sammobile (stock rom - to your country / language) - needs register
http://www.sammobile.com/firmwares/
Samsung Galaxy S III/GT-I9300 - Wiki - look this ... many and good links - how to install , root, recover , etc ...
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_III/GT-I9300
or here in xda - I do recommend a custom rom rooted ... try It ... you will want more and more power ... LOL ...
[10/04] INDEX of ROMs [Android Development Forum] - read in changelogs if the rom support multi csc ... nice fun
http://forum.xda-developers.com/showthread.php?t=2220154
* link updated and correct
best regards
if you can go into download mode, just flash a stock rom via odin. good luck
-------------------------------------
please let me know if i'm wrong and CLICK thanks if i help
SRIRAM
sent from my GT-I9300 running CM10.1 RC4.4 by Temasek
post an Odin screenshot if it doesn't go through
Hi guys!, first of all thank you for your support, here are the updates, i try flashing it via odin and a error was show and it was imposible to flash it that way, because i was desperate and impatient for having it back, i talk to a "expert" friend of mine, he told me that the problem was that the bootloader was locked by verizon, thats why i cant flash it, so he rooted the phone, and download e-z unlocker app or something like that, he install the app and then proceed to unlock the bootloader, everything went well, the turn off the phone for putting it on download mode but the phone wont turn on, it doesnt even charge it was dead, hard bricked :crying: ,so i reallyze that all my impatience went wrong and now i have a 900 dlls brick (im from mexico thats whhy is so expensive, a couple months ago) and well the only brigth side is that im going to try guarantee and say that the phone just experience a sudden death case and hopefully the belive me i´ll keep you guys updated! thanks for the support!
first of all, I asked for an Odin screenshot.
second of all, how can the bootloader be locked by Verizon if it's not a Verizon phone? i9300 is an international unlocked phone. If you messed with the bootloader, then I don't think there's anything you can do

question...

hello everyone
sorry if i post to the wrong place. can some help me where can i find custom rom's for china mobile? i got an I-MOBILE I-STYLE Q2 DUO. i have just 1 custom rom for my phone and i would like to try other rom's as well. I got now an 4.2.2 MAUI 11 AMD W12.22 SP V5 P4
KERNEL 3.4.0 BUILD JB2 Q2DUO V1.1 021
THANKS
Its definately the wrong place my friend
And I am hearing your phone's name for the first time ..
I will report this to a mod so that he shifts it to a appropriate place so that may getter better help
Btw two things
Since its a china phone so dunt expect many custom roms
Make sure u know how to flash stock rom incase...
Re: just a question...
doctor_droid said:
Its definately the wrong place my friend
And I am hearing your phone's name for the first time ..
I will report this to a mod so that he shifts it to a appropriate place so that may getter better help
Btw two things
Since its a china phone so dunt expect many custom roms
Make sure u know how to flash stock rom incase...
Click to expand...
Click to collapse
i had few months ago an HTC wildfire s and i got some experience how to use CWM. i already flashed my phone with CWM and installed the modded 4.2.2 Jelly Bean and im really satisfied with it. I will really appreciate it if somebody can provide me a link or something where can i find more info about my china mobile..
Regards
Steven
steven81ir said:
i had few months ago an HTC wildfire s and i got some experience how to use CWM. i already flashed my phone with CWM and installed the modded 4.2.2 Jelly Bean and im really satisfied with it. I will really appreciate it if somebody can provide me a link or something where can i find more info about my china mobile..
Regards
Steven
Click to expand...
Click to collapse
Here u go
http://droidfriend.com/forums/index.php?board=119.0
thanks
doctor_droid said:
Here u go
http://droidfriend.com/forums/index.php?board=119.0[/QUO
thanks. i tried to access the same site but for a reason 2 days long wasnt available. thanks again
regards
Steven
Click to expand...
Click to collapse
Hello again. I need a little help again..
I got a Samsung Galaxy Note 3 (MT6572). My friend would like to buy from me for his daughter. But he need Slovakian language in the phone. Because this phone is from Thailand does not have too many European languages. Can somebody help me where can i find European ROM for this device?
Thanks

Categories

Resources