Related
Hi,
need help with my unlocked NEO (not NEO V) with the Testpoint-Method
I currently have installed 4.1.B.0.431 (Kernel 2.6.32.9-perf) and don't know the next steps. I want to install
ROM:
JJHybrid_ROM_3.1_Stable_CompleteAOSP_NEO.zip
Kernel
suave-kernel-v5-exp-neo.img
but I dont find a solution to root my phone and install CWM. Or is this the wrong way?
I've now read so many different instructions that I am very confused and not know what are the next steps.
Jhybrid rom neednot to be flash just downlaod copy to your sd card install from CWM recovery
I have the same problem. I don't know how to root and install cwm on this firmware ;/
DaJackel said:
Hi,
need help with my unlocked NEO (not NEO V) with the Testpoint-Method
I currently have installed 4.1.B.0.431 (Kernel 2.6.32.9-perf) and don't know the next steps. I want to install
ROM:
JJHybrid_ROM_3.1_Stable_CompleteAOSP_NEO.zip
Kernel
suave-kernel-v5-exp-neo.img
but I dont find a solution to root my phone and install CWM. Or is this the wrong way?
I've now read so many different instructions that I am very confused and not know what are the next steps.
Click to expand...
Click to collapse
suave kernel have cwm included.For root,flash via cwm Superuser-3.0.7-efghi-signed.zip from here: http://forum.xda-developers.com/showthread.php?t=1678690 First flash the kernel,because you need cwm for flashing Superuser.
georgeiulian89 said:
suave kernel have cwm included.For root,flash via cwm Superuser-3.0.7-efghi-signed.zip from here: http://forum.xda-developers.com/showthread.php?t=1678690 First flash the kernel,because you need cwm for flashing Superuser.
Click to expand...
Click to collapse
Ahh, CWM is included.
Okay, then I think the next steps are:
- Start Neo in Fastmode (right butten pressed than poweron, the LED should light blue)
- rename suave-kernel-v5-exp-neo.img to boot.img
- Open Commandline on PC and run "fastmode boot boot.img"
- reboot phone to CWM and install Superuser-3.0.7-efghi-signed.zip from SDCard
- reboot phone check root
- reboot phone to CWM, wipe and install JJHybrid_ROM_3.1_Stable_CompleteAOSP_NEO.zip
- reboot and all done.
Is this right? Or can I install the Kernel with fastmode and then reboot to CWM to install directly the new ROM without Superuser-3.0.7-efghi-signed.zip.
First flash the rom,then flash Superuser.Btw,i'm not using command prompts,i'm using flashtool,it's much easy to work with,and don't neet to rename the kernel.You can get it from here: http://forum.xda-developers.com/showthread.php?t=1351317
I will try flashtool. I downloaded already, but dont used it so far. I will post my result when I flashed the kernel and the ROM.
i think i need to unlock my bootloader and root to install jellybean rom on xperia u,i know how to unlock my bootloader.i would like to install DevSwift1 rom on my xperia u,instruction said that ,"first flash experimental kernel http://forum.xda-developers.com/show....php?t=2326515
1)by flashing the experimental kernel ,will it root and install CWM recovery on my phone ?
2) every Jb install tutorial showing after flashing the experimental kernel ,extract the JB rom `zip and flash the kernel.ftf file by fastboot mode,but their is no kernel in the rom,but their is boot file...?(not boot.image file their is only a boot file and few other files)
3)does this mean i have to first flash the experimental kernel and i have to flash the kernel.ftf or the boot.image in the rom ?
4)i am very confuse could some one answer this questions and give me a step by step guide please don`t say just flash ,tell me like eg:-fastboot mode >select kernel to flash
SORRY FOR MY ENGLISH ,IF YOU CAN`T UNDERSTAND PLEASE ASK ME .........
If u have unlocked boot loader
Flash boot.img in the zip
Enter recovery
And follow ROM instruction
Thats it....
bharathbondfire said:
If u have unlocked boot loader
Flash boot.img in the zip
Enter recovery
And follow ROM instruction
Thats it....
Click to expand...
Click to collapse
but their is no "boot.image" in the zip,just "boot " file ....!!'! ,by the way can you answer my above questions!? It will ne very helpful to me,thank you...!!!!
xperia anfer said:
but their is no "boot.image" in the zip,just "boot " file ....!!'! ,by the way can you answer my above questions!? It will ne very helpful to me,thank you...!!!!
Click to expand...
Click to collapse
Do you have rooted phone and unlocked bootloader?
If yes then you flash experimental kernel and follow instructions.
asd987 said:
Do you have rooted phone and unlocked bootloader?
If yes then you flash experimental kernel and follow instructions.
Click to expand...
Click to collapse
i thought i know how to unlock my bootloader but i think it didn`t work,i unlock my bootloader via flashtool and it complete without a error but i don`t think it works ,because sony pc companion still recognize my phone.........!!!!! please help i cant understand the other bootloader unlocking methode thats why use the flashtool...........!!!! but i flash the experimental kernel and i able to go in to the CWM Recovery ......!!! somebody pleas help me
did i correctly unlock my bootloader or i still have a lock bootloader ?
their is many people here but no one to help me,i know this is not a very complicated thing to the XDA members but it is complicated to me ,don`t ignore me
I find this http://forum.xda-developers.com/showpost.php?p=22341848&postcount=4 for check if your bootloader is unlocked.
asd987 said:
I find this http://forum.xda-developers.com/showpost.php?p=22341848&postcount=4 for check if your bootloader is unlocked.
Click to expand...
Click to collapse
it showing "Bootloader Unlocked - Yes " acording to that thread(http://forum.xda-developers.com/showpost.php?) my bootloader is unlocked ,but my phone still recognize by the pc companion,i think if the bootloader is unlocked pc companion will no longer recognize my device.... but any way thank you for replying
I connect my phone to pc companion and it is recognize. I have installed CM11 on my phone, so I think your bootloader is unlocked.
So then you flash experimental kernel and then wipe cache/data/dalvik cache and flash zip.
Press thanks if I helped you
asd987 said:
I connect my phone to pc companion and it is recognize. I have installed CM11 on my phone, so I think your bootloader is unlocked.
So then you flash experimental kernel and then wipe cache/data/dalvik cache and flash zip.
Press thanks if I helped you
Click to expand...
Click to collapse
hmm ,can you help me to install jb rom on xperia U,
after flash experimental kernel, do i need to unzip the rom (DevSwift1 `s Jellybean rom) file and flash the kernel.elf or the boot.image ?
xperia anfer said:
hmm ,can you help me to install jb rom on xperia U,
after flash experimental kernel, do i need to unzip the rom (DevSwift1 `s Jellybean rom) file and flash the kernel.elf or the boot.image ?
Click to expand...
Click to collapse
No, go to cwm recovery and do full wipe (cache, data, dalvik-cache) and then choose install zip from sdcard and install rom zip (don't unzip before).
asd987 said:
No, go to cwm and and do full wipe (cache, data, dalvik-cache) and then choose install zip from sdcard and install rom zip (don't unzip before).
Click to expand...
Click to collapse
thanks ,I ask that question because of this http://www.youtube.com/watch?v=38Uw...dTRFN0sPvYjlmf-6yQ8KDv&feature=c4-overview-vl ,if you have time please watch this .......!!!!
are this steps correct ?
1)unlock the bootloader
2) flash experimental kernel(unzip the kernel file and flash the boot.image via fastboot)- """will flash experimental kernel,root and install CWM recover ?
3)full wipe (cache, data, dalvik-cache)
4) flash rom via CWM
5)reboot to system
xperia anfer said:
thanks ,I ask that question because of this http://www.youtube.com/watch?v=38Uw...dTRFN0sPvYjlmf-6yQ8KDv&feature=c4-overview-vl ,if you have time please watch this .......!!!!
are this steps correct ?
1)unlock the bootloader
2) flash experimental kernel(unzip the kernel file and flash the boot.image via fastboot)- """will flash experimental kernel,root and install CWM recover ?
3)full wipe (cache, data, dalvik-cache)
4) flash rom via CWM
5)reboot to system
Click to expand...
Click to collapse
between 1 and 2 steps you must root your phone. To do this follow this: http://forum.xda-developers.com/xperia-u/u-development/ics-noob-proof-root-via-flashtool-t1933985
2) you don't need unzip the kernel.elf, just move rom zip to the phone. In this video that you add he use kernel.elf, but you can use experimental kernel (has many features like overclocking so you can use this kernel) and flash like he done for kernel.elf
Then just follow instructions on your video
asd987 said:
between 1 and 2 steps you must root your phone. To do this follow this: http://forum.xda-developers.com/xperia-u/u-development/ics-noob-proof-root-via-flashtool-t1933985
2) you don't need unzip the kernel.elf, just move rom zip to the phone. In this video that you add he use kernel.elf, but you can use experimental kernel (has many features like overclocking so you can use this kernel) and flash like he done for kernel.elf
Then just follow instructions on your video
Click to expand...
Click to collapse
no i said "flash experimental kernel(unzip the kernel file and flash the boot.image via fastboot)" only for the flashing experimental kernel,i agree with you i should not unzip the rom file.....!!!
that video he unzip the rom file and flash a file and then he install the rom via CWM recovery,1st part of that video(i gave you the, link for the 2nd part) he flash experimental kernel,thats why ask you do that questions
i give you the both link and then you understand what i am saying and what i am confuse about ,please watch and reply soon....!!!
1st part - http://www.youtube.com/watch?v=V232...dTRFN0sPvYjlmf-6yQ8KDv&feature=c4-overview-vl
2nd part - http://www.youtube.com/watch?v=38Uw...dTRFN0sPvYjlmf-6yQ8KDv&feature=c4-overview-vl
xperia anfer said:
no i said "flash experimental kernel(unzip the kernel file and flash the boot.image via fastboot)" only for the flashing experimental kernel,i agree with you i should not unzip the rom file.....!!!
that video he unzip the rom file and flash a file and then he install the rom via CWM recovery,1st part of that video(i gave you the, link for the 2nd part) he flash experimental kernel,thats why ask you do that questions
i give you the both link and then you understand what i am saying and what i am confuse about ,please watch and reply soon....!!!
1st part - http://www.youtube.com/watch?v=V232...dTRFN0sPvYjlmf-6yQ8KDv&feature=c4-overview-vl
2nd part - http://www.youtube.com/watch?v=38Uw...dTRFN0sPvYjlmf-6yQ8KDv&feature=c4-overview-vl
Click to expand...
Click to collapse
when you rooted phone (follow my link) flash this kernel http://forum.xda-developers.com/xperia-u/u-development/kernel-experimental-v11c-t2326515 with flashtool. you don't need flash kernel.elf, because you flash experimental kernel.
then just go to cwm and follow instructions
asd987 said:
when you rooted phone (follow my link) flash this kernel http://forum.xda-developers.com/xperia-u/u-development/kernel-experimental-v11c-t2326515 with flashtool. you don't need flash kernel.elf, because you flash experimental kernel.
then just go to cwm and follow instructions
Click to expand...
Click to collapse
Thanks for your help.. you help me a lot ,just one last question are you saying that ,
" flashing experimental kernel will not root my phone ?
i am on 6.1.1.b.1.54 firmware so this version can not flash via flashtool but i found another way......thanks for your time ,i think you understand my reason for the confuse after watching the those videos....
i am not saying that you don`t know about this, but ,,.I am creating a new thread about " my bootloader unlocked or locked ? "because i have a small doubt about that" ( from my knowledge after bootloader unlocked, pc companion will not recognize my phone,that`s why we can not get sony officail updates via pc companion "after" unlocking the bootloader)
once againg thanks please answer my last question ?
xperia anfer said:
Thanks for your help.. you help me a lot ,just one last question are you saying that ,
" flashing experimental kernel will not root my phone ?
i am on 6.1.1.b.1.54 firmware so this version can not flash via flashtool but i found another way......thanks for your time ,i think you understand my reason for the confuse after watching the those videos....
i am not saying that you don`t know about this, but ,,.I am creating a new thread about " my bootloader unlocked or locked ? "because i have a small doubt about that" ( from my knowledge after bootloader unlocked, pc companion will not recognize my phone,that`s why we can not get sony officail updates via pc companion "after" unlocking the bootloader)
once againg thanks please answer my last question ?
Click to expand...
Click to collapse
Answer on your question :No it will not
if you have doubt if you have unlocked bootloader try again. i think this will help you: http://forum.xda-developers.com/xperia-u/issues/guide-beginners-how-to-unlock-t1971363
I didn't know that you have b.1.54 firmware
To root you must first flash B.1.10 kernel here: http://www.4shared.com/file/LcgUNFYl/Xperia_U_ICS_404_kernel_nu.html
Than root wtih these http://forum.xda-developers.com/xperia-u/u-development/ics-noob-proof-root-via-flashtool-t1933985
Than flash b.1.54 kernel here: http://www.4shared.com/file/ob4lM4PB/xperia_u_611B154_World_kernel.html
to istall jeally bean only flash experimental kernel:http://forum.xda-developers.com/xperia-u/u-development/kernel-experimental-v11c-t2326515 and copy rom zip to phone. you don't neeed to have rooted phone.
Then go to cwm and follow instruction to flash rom
I hope i help you and sorry for my bad english
asd987 said:
Answer on your question :No it will not
if you have doubt if you have unlocked bootloader try again. i think this will help you: http://forum.xda-developers.com/xperia-u/issues/guide-beginners-how-to-unlock-t1971363
I didn't know that you have b.1.54 firmware
To root you must first flash B.1.10 kernel here: http://www.4shared.com/file/LcgUNFYl/Xperia_U_ICS_404_kernel_nu.html
Than root wtih these http://forum.xda-developers.com/xperia-u/u-development/ics-noob-proof-root-via-flashtool-t1933985
Than flash b.1.54 kernel here: http://www.4shared.com/file/ob4lM4PB/xperia_u_611B154_World_kernel.html
to istall jeally bean only flash experimental kernel:http://forum.xda-developers.com/xperia-u/u-development/kernel-experimental-v11c-t2326515 and copy rom zip to phone. you don't neeed to have rooted phone.
Then go to cwm and follow instruction to flash rom
I hope i help you and sorry for my bad english
Click to expand...
Click to collapse
("if you have doubt if you have unlocked bootloader try again. i think this will help you: http://forum.xda-developers.com/xperia-u/issues/guide-beginners-how-to-unlock-t1971363")
i follow this steps i want to find it works or not ???
So I updated to a new ROM and I have damaged my recover or I need to update recovery somehow.
The ROM launches and I have ADB support but not google play services or root working
I can access my bootloader (blue LED)but I don't know how to fastboot a new recovery from there
When I go to access recovery (pink LED) the recovery never loads. It used to be a CWM/TWRP dual boot, neither are working.
So I am guessing I need to flash a boot.img from the bootloader using fastboot? I can't find any boot.imgs anymore. Just all this one click **** that doesn't work at all for some reason.
Advice?
On which ROM are you?
Is it AOSP, CM or Stock based?
Is your bootloader unlocked?
If you are on windows, try using nuts dual recovery installer (if you are on stock based rom). But before u use it, u should install ADB system-wide or try to put it into a folder directly on C:/
If you are on e. g. CM12.1 you need to "fastboot flash recovery recovery.img" (you find them in the General Section)
http://forum.xda-developers.com/xperia-z2/general/twrp-recovery-collection-t2999078
Mikey94 said:
On which ROM are you?
Is it AOSP, CM or Stock based?
Is your bootloader unlocked?
If you are on windows, try using nuts dual recovery installer (if you are on stock based rom). But before u use it, u should install ADB system-wide or try to put it into a folder directly on C:/
If you are on e. g. CM12.1 you need to "fastboot flash recovery recovery.img" (you find them in the General Section)
http://forum.xda-developers.com/xperia-z2/general/twrp-recovery-collection-t2999078
Click to expand...
Click to collapse
Ok, so lots of info here you might want. =)
Yes Bootloader unlocked. I WAS on paranoid ROM kitkat. It pushed a LP OTA update, which silly me, I installed. So right now the phone is on an AOSP based LP ROM, coming from a KK ROM. There was a dual recovery approperiate for that PA KK ROM installed before.
Anyway, I downloaded a recovery from the link you posted and I am currently installing a backup from before I did all these silly and naive things. =p
My next project... How do I go back to stock so I can try a none AOSP ROM? (o:'
two ways :
- you can download a stock rom ftf file from the official thread here, then use flashtools to flash that file (a more complicated version would be to create your own ftf file using xpirifirm and flashtools), OR
- You can download a pre-rooted zip (also available on the forums here) and install that through your current recovery.
Either way make sure you do a full wipe, stock and AOSP don't like each other much from my experience.
http://forum.xda-developers.com/xperia-z2/general/ftf-cutomized-23-1-0-726-cda-1281-9809-t3082166
1. Go here and download the 23.1.A.1.28 FTF and prerooted zip. (It's the latest stock firmware version) and copy the zip file on your phone.
2. Go to recovery
3. Do a factory reset (wipe)
4. Flash the prerooted zip
5. Shut down your phone (NO REBOOT!)
6. Go to Flashtool -> Flashmode and load the FTF file
7. remove everything in "wipe"
8. on "exclude" tick the following: PARTITION, TA and SYSTEM
9. Click on flash and connect your phone via flashmode and let it flash.
10. Disconnect your phone and start
11. You are done. let the phone boot and settle and reboot one time. Now you are on stock with recovery and root.
Here you go with Hybrid Recovery v3.x , which supports all available ROMs/ OSs for our beloved OnePlus2.
#One Recovery for All
1. Oxygen OS
2. Hydrogen OS
3. CM 13
4. Paranoid ROM
5. Ressurection Remix
6. Vanilla Unicorn
7. Dirty Unicorn
Download: Hybrid Recovery v3.2
Download: Hybrid Recovery v3.3
Download: Hybrid Recovery v3.4
Changelog : Hybrid Recovery v3.4
Code:
1. Added Option to Rename a backup package.
2. Added missing Timezone tab.
3. Combined modemst1 & modemst2 as "EFS" partition.
4. UI Enhancements.
Changelog : Hybrid Recovery v3.3
Code:
1. Install Section Optimized
2. Added New Partitions
a.Modemst1
b.Modemst2
c.OEM
d.Misc
e.Persist
f.Firmware
3. Fixed missing Strings & Optimized UI
Changelog : Hybrid Recovery v3.2
Code:
1. Hybrid UI, Simple and Beautiful.
2. Optimized Animation and Speed
3. Added SysLog and SysInfo in Advance Section.
4. Added Missing EFS and Recovery Partitions
5. OTG Support
6. Added ViewLog Option in Install Section
7. OnePlus Logo is now the back button (on demand)
Thanks! Been waiting for this. Downloading now.
Update:
My phone is encrypted and on OOS 3.0. Was able to use fastboot method to flash the new recovery. Unfortunately still can't get TWRP to decrypt the phone. Anyone have luck?
Update 2:
Tried TWRP 3.0.2 Hybrid v2 and decrypt still not working. Thanks for the attempted fix WhyOrean!
Just a FYI, flashing your recovery form TWRP prevented me from getting back into recovery. Had to load the previous twrp (3.0.2) via fastboot.
Could you please share the steps to Install it?
Do they depend on our current TWRP?
Best Regards
marpe said:
Could you please share the steps to Install it?
Do they depend on our current TWRP?
Best Regards
Click to expand...
Click to collapse
+1
marpe said:
Could you please share the steps to Install it?
Do they depend on our current TWRP?
Best Regards
Click to expand...
Click to collapse
https://twrp.me/devices/oneplustwo.html
The easiest way is to flash it within TWRP if you have TWRP 2.8.4 or higher already installed. Otherwise use Fastboot Install Method. Check the link above.
madferretx said:
https://twrp.me/devices/oneplustwo.html
The easiest way is to flash it within TWRP if you have TWRP 2.8.4 or higher already installed. Otherwise use Fastboot Install Method. Check the link above.
Click to expand...
Click to collapse
Yes but if do i flash via twrp..?
isoladisegnata said:
Yes but if do i flash via twrp..?
Click to expand...
Click to collapse
If you have TWRP already just select install images, flash this file and reboot.
this hybrid firmware not work for me while using CM13.
I flashed the official TWRP 3.0.2.0 via fastboot then its okay now.
Some users have reported many problems flashing this TWRP, so, please add the steps depending your current TWRP.
Can we flash it directly if we are using the modified H20 and OOS3 TWRP?Is it necessary to flash "Revert2Lollipop" before flashing this?
Thank you
I'm on OS3.0 and flash this recovery img file directly from my previous TWRP, and it worked as expected.
From OOS3.0 beta and TWRP 3.0.1-0 modified I've flash'd this hybrid recovery and no problem at all.
It works fine.
Thanks for the job.
WhyOrean said:
Download required Firmware Zip and Run Update script.
Click to expand...
Click to collapse
@WhyOrean - It might be worth including the backup partitions in the Update.bat too so users running Oxygen OS can flash OTA updates (these are checked before being patched).
Code:
fastboot flash abootbak emmc_appsboot.mbn
fastboot flash hypbak hyp.mbn
fastboot flash pmicbak pmic.mbn
fastboot flash rpmbak rpm.mbn
fastboot flash sbl1bak sbl1.mbn
fastboot flash tzbak tz.mbn
Finally thanks for this
Verstuurd van mijn ONE A2003 met xda Forums PRO
So..if i am on h2os or oos3 and want to flash a cm13 ROM i flash old modem so oos2/cm13/ first...if i am on cm13 and i want to flash oos3 or h2os mm i have to flash new modem firmware ..right?
isoladisegnata said:
So..if i am on h2os or oos3 and want to flash a cm13 ROM i flash old modem so oos2/cm13/ first...if i am on cm13 and i want to flash oos3 or h2os mm i have to flash new modem firmware ..right?
Click to expand...
Click to collapse
Yep, but fastboot flash rather than recovery flash.
If you're on OOS3 or H2MM and want to move to CM13, fastboot flash the contents of the Oxy2_CM13_Firmware.zip first.
If you're on CM13 and want to move to OOS3 or H2MM, fastboot flash the contents of the OOS3_H2MM_Firmware.zip first.
Spannaa said:
@WhyOrean - It might be worth including the backup partitions in the Update.bat too so users running Oxygen OS can flash OTA updates (these are checked before being patched).
Click to expand...
Click to collapse
Sure I will add up that too, soon.
madferretx said:
Thanks! Been waiting for this. Downloading now.
Update:
My phone is encrypted and on OOS 3.0. Was able to use fastboot method to flash the new recovery. Unfortunately still can't get TWRP to decrypt the phone. Anyone have luck?
Click to expand...
Click to collapse
Sad to here that it didnt help, but remember patching encrypt fix from TWRP 3.0.2.
Yeah I never checked it on Encrypyed OP2, I dont Encrypt my phone nor I can encrypt it now to check.
Anyhow thanks for reporting, I will unto that in next build soon.
lockmunk said:
this hybrid firmware not work for me while using CM13.
I flashed the official TWRP 3.0.2.0 via fastboot then its okay now.
Click to expand...
Click to collapse
Thanks for reporting, I will look unto it.
But its working fine with my OPT Mokee OS(CM13 based)
marpe said:
Could you please share the steps to Install it?
Do they depend on our current TWRP?
Best Regards
Click to expand...
Click to collapse
1) Install it via your Current TWRP
Got to Install Section
Select Flash Image
Select TWRP Hybrid n Flash
2) Install via fastboot
Put your phone in fastboot
And flash via following command:
fastboot flash recovery twrp.img
fastboot boot twrp.img
help me!!
I recently failed
Me too trying but got error even i think i brick my camera :'(
youvedone said:
I recently failed
Click to expand...
Click to collapse
I deleted all stuff.. and started again with marsh..
More Infos please?
Is your bootloader already unlocked?
What is with your camera?
How did you tried?
Which error did you get?
1. Make your boot image compatible with nougat rootkernel tool (and flash it)
2. Flash twrp 3.0.2.0 to recovery partition
3. boot into twrp and flash systemless supersu zip or flash magisk with superuser
4. profit
[email protected] said:
1. Make your boot image compatible with nougat rootkernel tool (and flash it)
2. Flash twrp 3.0.2.0 to recovery partition
3. boot into twrp and flash systemless supersu zip or flash magisk with superuser
4. profit
Click to expand...
Click to collapse
"1. Make your boot image compatible with nougat rootkernel tool (and flash it)"
How do you do that? (step by step)
NakiKiwiNZ said:
"1. Make your boot image compatible with nougat rootkernel tool (and flash it)"
How do you do that? (step by step)
Click to expand...
Click to collapse
Use latest TWRP for this (3.1.0.0). You can find the download in Sony Cross Device General section.
1 Install it to recovery partition (fastboot flash recovery twrp3100forz5c.img)
2 Boot into twrp (hold power and volume - till the phone vibrates)
3 Backup boot partition with twrp
4 Get boot.emmc.win from twrp backup folder
5 use this file in rootkerneltool
6 follow rootkerneltool guide
[email protected] said:
Use latest TWRP for this (3.1.0.0). You can find the download in Sony Cross Device General section.
1 Install it to recovery partition (fastboot flash recovery twrp3100forz5c.img)
2 Boot into twrp (hold power and volume - till the phone vibrates)
3 Backup boot partition with twrp
4 Get boot.emmc.win from twrp backup folder
5 use this file in rootkerneltool
6 follow rootkerneltool guide
Click to expand...
Click to collapse
is there a noob guide somewhere how to actually do each step ?
Montago said:
is there a noob guide somewhere how to actually do each step ?
Click to expand...
Click to collapse
If you wanted to use 32.3.A.0.372 with this method - https://forum.xda-developers.com/z5-compact/general/recovery-nougat-7-0-android-bootable-t3609358 - you can still use the same recovery image to flash to the recovery partition - just use the kernel for 32.3.A.0.372 - the bootloader kernel is the same for 32.3.A as it is for 32.4.A