Hy guys i have a big problem and i need advice. i was using some rom ics with 3.6 sense and today it start boot loop then i decided to test this
Team Venom presents: Viper3D 1.0.0 Nightly welcome to the future. installation went great but the problem started there. it can not find any network. i tried full wipe of everything but its the same. it does not let me update radio anymore. everything else works. IT revolutionary shooter_u Xa shio s-off RL, hboot- 1.49.1107, radio - 11.25.3504.06_M, cid is HTC__001
and i am using gsm version
Your cid is HTC_001 right? Well that means your unbranded right? Well that could be the problem. If your not branded with a carrier your not going to get a mobile signal. There's nothing wrong with your phone bro. Since your radios are up-to-date of course it won't let you upgrade. Suggestion: brand your phone to get a mobile network. Hope that helps you.
Jsparta26 said:
Your cid is HTC_001 right? Well that means your unbranded right? Well that could be the problem. If your not branded with a carrier your not going to get a mobile signal. There's nothing wrong with your phone bro. Since your radios are up-to-date of course it won't let you upgrade. Suggestion: brand your phone to get a mobile network. Hope that helps you.
Click to expand...
Click to collapse
i will try. how to do that?
That depends on what mobile carriers are in your region. Whichever one you chose, you will have to find the right stock ruu with the carrier you want service from. For instance, If you want Vodafone service you would get a shooterru ics Vodafone (with matching radios) ruu file and flash it through your bootloader. Now please make sure you find the correct one or else you will brick your phone. Now, to verify you are on Vodafone check your cid which should say voda_001 or something like that. Note this was hypothetical scenerio and used as an example. But you get my point. After you find your appropriate ruu and flash it. Call the mobile carrier and ask to activate an account with them to get your phone activated. Just remember that I nor nobody else is responsible if you turn your phone into a expensive paperweight.
Jsparta26 said:
That depends on what mobile carriers are in your region. Whichever one you chose, you will have to find the right stock ruu with the carrier you want service from. For instance, If you want Vodafone service you would get a shooterru ics Vodafone (with matching radios) ruu file and flash it through your bootloader. Now please make sure you find the correct one or else you will brick your phone. Now, to verify you are on Vodafone check your cid which should say voda_001 or something like that. Note this was hypothetical scenerio and used as an example. But you get my point. After you find your appropriate ruu and flash it. Call the mobile carrier and ask to activate an account with them to get your phone activated. Just remember that I nor nobody else is responsible if you turn your phone into a expensive paperweight.
Click to expand...
Click to collapse
i understand but the problem is to find correct cid of this network and the orginal is probably changed. It Vipnet Croatia part of A1. Do you have a suggestion where to look?
Ok after much research, I have reached a deadend. So, let me ask you this, is your cid still HTC_001? Does Vodafone own vipnet? If so, maybe flash a Vodafone cid might work for you? I'll try to keep looking, in the meantime is there anybody you know that has vipnet on their evo 3d that can tell you what their cid is?
last i checked (a couple years ago) vipnet was owned by vodaphone.
he's s-off and should have absolutely no problem downgrading his radio, so this is rather puzzling
also I don't think CID should have any effect on his signal
my best guess would be that since viper3D is sense 4.0 based it doesn't play nice with some aspects of the phone, try flashing another rom/kernel maybe, bottom line if i'm wrong you rule those two out,
hope this helps
Ok just checking because he was asking to write a vipnet cid to his phone and after looking through google I came into that conclusion that he could probably brand his phone with Vodafone. I'm pretty sure there was nothing wrong with his phone just needed a mobile carrier to have an active data signal. Thanks for helping me help him.
Have you tried using a custom apn? In other words: setting up the apn yourself? Had the same problem, i live in holland thoufh
sent from my almighty forbidden viper evo3d
Just to clear things up, when you say no mobile network, you mean no internet, or can you not call or text either?
dessolator666 said:
Just to clear things up, when you say no mobile network, you mean no internet, or can you not call or text either?
Click to expand...
Click to collapse
no phone,sms, internet, nothing involving sim card. i tried other roms and its the same. i will try to downgrade my radio and see how that goes. tnx for you help guys
agaspar5 said:
no phone,sms, internet, nothing involving sim card. i tried other roms and its the same. i will try to downgrade my radio and see how that goes. tnx for you help guys
Click to expand...
Click to collapse
when i try to install new radio in bootloader it say model id wrong. i tried downgrade radio and it said it went fine...
Seriously, we are trying to help you. Your radios have nothing to do with your problem. You have to have an active service on your phone for all these features to work. Based on what you have told us it has to be a no service issue. You have to brand your phone with a mobile provider and contact them to set up an account. You do this by flashing a firmware to get your radios intune with your carrier of choice. I did look all over the place and cannot find a vipnet firmware anywhere. My suggestion is to flash to Vodafone for your region. Cid does not have anything to do with getting service since you are unbranded. When you brand your phone the firmware will convert your phones cid to match with the correct cid to have network service. I hope this helps you. I really hate to see you screw up your phone from not listening to our advice.
Jsparta26 said:
Seriously, we are trying to help you. Your radios have nothing to do with your problem. You have to have an active service on your phone for all these features to work. Based on what you have told us it has to be a no service issue. You have to brand your phone with a mobile provider and contact them to set up an account. You do this by flashing a firmware to get your radios intune with your carrier of choice. I did look all over the place and cannot find a vipnet firmware anywhere. My suggestion is to flash to Vodafone for your region. Cid does not have anything to do with getting service since you are unbranded. When you brand your phone the firmware will convert your phones cid to match with the correct cid to have network service. I hope this helps you. I really hate to see you screw up your phone from not listening to our advice.
Click to expand...
Click to collapse
i am tring to find vodafone rom to brand my phone. tnx for advice
Related
I need to ship my HTC Fuze back to ATT for warranty service. I have a new ROM and Radio on the phone and I need to restore everything to the way I purchased it. I've found the ATT OEM radio through searching, but I can't find the rom. I'm not even sure where to look after the search didn't bring anything up.
Any advice?
t3m17 said:
I need to ship my HTC Fuze back to ATT for warranty service. I have a new ROM and Radio on the phone and I need to restore everything to the way I purchased it. I've found the ATT OEM radio through searching, but I can't find the rom. I'm not even sure where to look after the search didn't bring anything up.
Any advice?
Click to expand...
Click to collapse
Come on man...
http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs
i did the same thing today.. the rom was on the raphael wiki..
dude you need to search more!
t3m17 said:
I need to ship my HTC Fuze back to ATT for warranty service. I have a new ROM and Radio on the phone and I need to restore everything to the way I purchased it. I've found the ATT OEM radio through searching, but I can't find the rom. I'm not even sure where to look after the search didn't bring anything up.
Any advice?
Click to expand...
Click to collapse
Well, since you've already been mildly flamed and Slawcop has provided you with a link to the files that you need, I think your next question may be which of the AT&T Roms and radios do you need to install...? The answer there would be "Any of the AT&T roms and radios, or combination of them..." As long as the rom is an AT&T rom you shouldn't have any issues... Personally, I would go with the latest one...
Good Luck...
Hi Guys, I know this isn't the right location for this thread, haven't got high enough post count.
I have a Voda Au branded sgs2 with kernal version DUKF2. Tried to unlock with Odia's method, Chainfire app, even spent a few (wasted) bucks on the 123unlock app.
And as expected Voda is dragging their feet to supply a sim unlock code.
Also, my nv_data.bin looks different from some of the others posted in Odia's thread...yes i rooted the phone and got it from /efs/nv_data.bin, copied to sdcrad ..etc.
Is it possible sammy have caught on and changed something?
Any help appreciated. Cheers.
Weird that voda simlocked, my Optus one arrived completely open. I'm sure you've confirmed it's locked before spending any time on this but what does the following code give you for the 4 lock values?:
*#7465625#
Help!
Hey I also have a vodafone sg2... can you help me root it? I understand the procoss but unsure on the firmware to use... any help? Mine is KF2 however its a model I9100T... does it matter can someone give me some help?
I think that Voda are just mean pricks. The Network lock is on and the other 3 (sub, SP, CP) are off.
Unrealtb, I used the latest CF_Root - V4.0 firmware, rooted it, the restored the original DUKF2.
sg2 rooting
sorry to hassle, can you give me the link to the firmware u flashed and where the original one is to reflash (to get the Yellow ! off).
thanks!!!
is this the CF_Root
http://forum.xda-developers.com/attachment.php?attachmentid=630777&d=1308560511
Is this the Original to reflash
http://www.multiupload.com/HIKNP08JZA
no probs.
http://forum.xda-developers.com/showthread.php?t=1113928
Cool,
thanks for that,
Is
CF-Root-SGS2_XX_OXA_KF2-v4.0-CWM4.zip (5.97 MB, 1455 views)
From....
( http://forum.xda-developers.com/showthread.php?t=1103399 )
the one we use for our phones?
also, do you know the password for this file?
Cheers mate!
that's the one i used.
The password for the stock kernal is [email protected]
Cool just rooted my phone!! thanks mate, much appreciated
No worries.
I think I've worked out my problem...
New Hardware Version - MP 1.300
New Radio Version - SP6260_U1_01.1121_DB110525
New Unlock Method
Now just need to wait for a solution.
I just rooted mine now and lashed Villain Rom. Running the SGS2simunlock app now see what it returns. Will let you know results, mine is also from Voda
Hrm... I wonder if it's not working because you possibly have the GT-I9100T and most of the unlocking work was done on the I9100? I remember reading Intra was quite shocked at how much larger the stock firmware for voda was: http://forum.xda-developers.com/showpost.php?p=14838150&postcount=6. Still not entirely sure of what the difference is.
So it seems no unlock code found! i believe Voda's was bigger because they had like 7-8 extra apps installed, plus Voda's came with Navigon preinstalled
I believe Odia is working on a solution.
http://forum.xda-developers.com/showthread.php?t=1133069
We should have a better idea once Telstra release theirs.
Weird thing though, *#2222# shows HW version 1.2, but looking at the .bin file it shows 1.3
Hey sorry for the newb question, what are you trying to are you trying to use the phone ok n other networks? unlock?
Have you tried http://vodafone.com.au/unlock
Thought it's free to unlock vodafone?
No I do not have this handset but thinking about it and going to vodafone, but if it's locked and there's no solution yet, I'll just wait awhile
If people want this done faster, I am currently assisting Odia in getting the new hax.
Please read this post and send me your files.
http://forum.xda-developers.com/showthread.php?t=1133069
I have exactly the same issue, with Voda AU and the S2 SIM Unlock does not work for me as well....the voda unlock site is not working either.... the cutomer care told me to wati for 4 business day....
Now, I have to wait for new apps to unlock it, or 4 business day
mrxd said:
Weird that voda simlocked, my Optus one arrived completely open. I'm sure you've confirmed it's locked before spending any time on this but what does the following code give you for the 4 lock values?:
*#7465625#
Click to expand...
Click to collapse
Mine is
Network lock [ON]
Network Subset lock [OFF]
SP lock [OFF]
CP lock (OFF]
I carrier unlocked my phone ATT Titan on Friday. I tested by installed a T-mobile SIM and i was receiving network signal on the T-mobile network. However, I'm not receiving the 8107 update. Is this not the same as having a debranded phone? I debranded my Samsung Focus and the update followed soon after. Can someone please shed some light on this for me? Thanks
its not the same as having a debranded phone ! .
the process of unlocking you mentioned just allows you to use other sim cards on an at&t device . but your device is still an at&t device .
the only true way of unbranding your phone now is to flash an unbranded rom . which i think its still not possible as of now .
xtrememanix said:
its not the same as having a debranded phone ! .
the process of unlocking you mentioned just allows you to use other sim cards on an at&t device . but your device is still an at&t device .
the only true way of unbranding your phone now is to flash an unbranded rom . which i think its still not possible as of now .
Click to expand...
Click to collapse
DOH!!!!!!! That would explain why my Focus got the update. I flashed it witha custom ROM and then it got the update. So there aren't any custom HTC Titan ROMs?
I have a unlocked titan but i have not got the update yet. Anything i can do to get it?
Sent from my TITAN X310e using Board Express
Have you tried forcing the update through Zune? Search for an update then see if it finds one, If not search again and you will need to unplug your Modem/Lan cable as it searches again, Its a trial and error thing and getting the timing right is the difficult part, I managed to force the 8107 using this method, There should be some threads lurking around somewhere on XDA, Best of luck.
Also remember it is the network carriers who dish out the updates, Maybe if you put an ATT sim back in it may update easier then you can go back to T-mobile etc.
Do you need interop unlock for reg access?
Sent from my HTC TITAN using XDA Windows Phone 7 App
No custom ROMs yet, Don't know about REG access but imagine you would need a dev unlocked device.
AndyFZ1S said:
Have you tried forcing the update through Zune? Search for an update then see if it finds one, If not search again and you will need to unplug your Modem/Lan cable as it searches again, Its a trial and error thing and getting the timing right is the difficult part, I managed to force the 8107 using this method, There should be some threads lurking around somewhere on XDA, Best of luck.
Also remember it is the network carriers who dish out the updates, Maybe if you put an ATT sim back in it may update easier then you can go back to T-mobile etc.
Click to expand...
Click to collapse
Got it now! But i have an unlocked Titan.
Got what and how. My phone is dev unlocked
Sent from my HTC TITAN using XDA Windows Phone 7 App
wheelerk said:
Got what and how. My phone is dev unlocked
Sent from my HTC TITAN using XDA Windows Phone 7 App
Click to expand...
Click to collapse
The 8107 update. I got it when i searched again. I didn´t have to do anything.
Use the cab sender. That's what i did and install the languages.
Don't even have to be unlocked to use it.
I know this question has been posted but I can't find the answer.
I live in Canada and am on the Bell network.
My phone died a horrible death, and I want to buy a HTC Titan on eBay.
All I can find that are unlocked are AT&T X310a. What I want to know is will they work for me on the Bell network
If not what should I be looking for.
Thanks MrRusty
MrRusty said:
I know this question has been posted but I can't find the answer.
I live in Canada and am on the Bell network.
My phone died a horrible death, and I want to buy a HTC Titan on eBay.
All I can find that are unlocked are AT&T X310a. What I want to know is will they work for me on the Bell network
If not what should I be looking for.
Thanks MrRusty
Click to expand...
Click to collapse
Will it work? Yes
Will you get 3G (HSPA+)? Depends is Bell 3G on the same frequency (850 & 1900)?
I purchased an unlocked AT&T Titan and put it on the Telus network and it works great. Telus and Bell are 3G HSPA+ 850 1900.
Thanks very much for the responses!
The AT&T you bought was the model number X310a or X310e and does it have a AT&T stamped on it.
And did you just stick your sim card in it and away you went.
And thanks ahead of time for any help.
You may not be able to use MMS though as it will probably only have settings for at&t in the database, Even connection set-up may not work properly, I could not use an at&t branded Titan 2 for MMS in the UK, Everything else worked fine, The best option is to get an EU Titan X310e which wont have any branding etc.
I have at&t x310a.
It works on Bell network just fine.
Has anyone used x310e from Europe?
Will it work the same?
AndyFZ1S said:
You may not be able to use MMS though as it will probably only have settings for at&t in the database, Even connection set-up may not work properly, I could not use an at&t branded Titan 2 for MMS in the UK, Everything else worked fine, The best option is to get an EU Titan X310e which wont have any branding etc.
Click to expand...
Click to collapse
Off-topic:
MMS won't work even with the EU Titan on many networks.
In UK O2, Giffgaff and T-mob have frequent issues.
Three, Vodafone, Orange seems to be ok with MMS.
Probably same with US networks? Some will work and some wont.
Custom Rom
zup2sky said:
I have at&t x310a.
It works on Bell network just fine.
Has anyone used x310e from Europe?
Will it work the same?
Click to expand...
Click to collapse
Thanks for the great posts, really helps and good to know as mine is on it's way
Did you install a custom rom on yours, or running the AT&T stock.
Were you able to uninstall the AT&T apps?
I know this sounds stupid ... can you remove the AT&T logo on the front top of the screen.
Just asking :laugh:
AT&T Logo is beneath the glass- so unless you replace the lcd itself it won't be possible to remove the logo.
As for custom roms, I haven't unlocked the phone. I've ordered the Y-cable and patiently waiting for it to arrive...
I've read on xda that all you need to do to unlock and install a custom rom on the AT&T x310e or x310a is to install HSPL then you can just install the custom rom.
Have anybody done on and the steps involved.
AT&T Custom Rom Install
let me try and get this straight in my mind
I just picked up a new AT&T Titan (P139100) and I live in Canada and on the Bell network.
The phone is unlocked x310a or x310e
Can I just hold down the volume + and power button to start boot mode plug into my laptop and then just install Dynamics 7 v1.21 or can I just get away with installing HSPL then rom
Relocking
MrRusty said:
I've read on xda that all you need to do to unlock and install a custom rom on the AT&T x310e or x310a is to install HSPL then you can just install the custom rom.
Have anybody done on and the steps involved.
Click to expand...
Click to collapse
And one other thing I have a unlock code to unlock the phone so it will work on the Bell network, but each time I shut the phone off I haveto enter the unlock again to use it. Anybody have a fix or work around for this:crying:
MrRusty said:
let me try and get this straight in my mind
I just picked up a new AT&T Titan (P139100) and I live in Canada and on the Bell network.
The phone is unlocked x310a or x310e
Can I just hold down the volume + and power button to start boot mode plug into my laptop and then just install Dynamics 7 v1.21 or can I just get away with installing HSPL then rom
Click to expand...
Click to collapse
Not quite. Before embarking with installation of custom rom it pays for you to have good read on the titan development section and understand how this work or not work especially with ATT branded titan. Basically you will need to use a gold card method to flash dft spl 2.5 before you can install dft hspl both are pre requisite so you can install custom rom.
Goodluck.
Sent from my TITAN X310e using XDA Windows Phone 7 App
MrRusty said:
And one other thing I have a unlock code to unlock the phone so it will work on the Bell network, but each time I shut the phone off I haveto enter the unlock again to use it. Anybody have a fix or work around for this:crying:
Click to expand...
Click to collapse
To get rid of this annoying unlocked code business, you need to flash a stock Cingular rom 1.10, then force update to 8107 or Tango using cab sender, and problem solved
Sent from my TITAN X310e using XDA Windows Phone 7 App
habnzrot said:
To get rid of this annoying unlocked code business, you need to flash a stock Cingular rom 1.10, then force update to 8107 or Tango using cab sender, and problem solved
Sent from my TITAN X310e using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Hu!:laugh:
Ok then... it's a AT&T phone but I use a Cingular rom. Do I have to flash using a Gold card and y cable and with SPL then HSPL then update with the rom or can I just Flash it with the Cingular Rom. And if it's that easy is there a link to the Cingular Rom 1.10
And better still is there a wiki on how to do it with software links.
Thanks
Cingular rom is the stock rom for ATT branded phone and you only need to use RUU to flash this rom. Downloand ROM and RUU from this thread: http://forum.xda-developers.com/showthread.php?t=1334468
habnzrot said:
Cingular rom is the stock rom for ATT branded phone and you only need to use RUU to flash this rom. Download ROM and RUU from this thread: http://forum.xda-developers.com/showthread.php?t=1334468
Click to expand...
Click to collapse
Thanks for the Idea and link but the link doesn't work for the Cingular rom and I can't find another file hosting page to d/l from.
And another question (soooo many questions! ) any one know how to view your cell phone files in windows explorer on your pc
I tried the registry edit thing but that didn't work.
OK I have finally found the Cingular Eternity rom and ruu.
Can you point me towards a link to the cab sender or the instructions on how to do it.
MrRusty said:
OK I have finally found the Cingular Eternity rom and ruu.
Can you point me towards a link to the cab sender or the instructions on how to do it.
Click to expand...
Click to collapse
Check this thread, everything you need is there- http://forum.xda-developers.com/showthread.php?t=1736982&highlight=tachi91
habnzrot said:
Check this thread, everything you need is there- http://forum.xda-developers.com/showthread.php?t=1736982&highlight=tachi91
Click to expand...
Click to collapse
OK so I found the Cingular ROM and install it, the re-locking problem has gone away.
I updated to Tango (8773) and all runs great!... but
After I installed 7720, HTC Connection Setup app wasn't there and after upgrading to 8773 it still isn't there.
The problem I have is I can't send a picture with a text message. I can send a text message fine, surf the internet with WiFi on and off.
I have 4G everything works great, I just can't send a pic attached to my text message and I can't receive a picture either if some one sends a text with a pic attached. I have gone into the APN settings and entered all there is to enter from the Bell site but still nothing.
When I got the phone it came loaded with AT&T 7720 and had the connection setup app installed and it entered the info fine and I had text and picture attached and it worked great. I could send text messages with pics attached all day long and it worked fine.
What I want to know is is there a way to get into the MMSC or what ever they call it to tell the phone it can use this feature. As I said before it worked fine when the connection setup app was there. But it's unavailable now from the HTC market site
Greetings,
Ive lurked on xda for years without ever posting. All problems are solvable with a little research and the help of our mutual friend google
Im on my 4th HTC device, now a OneX+ that was brought into Dubai from Taiwan. Having successfully rooted and rommed all my phones and tablets, I kinda jumped the gun and started mucking around with my phone a bit early, using the rootboot early on.
I attained SU properly, but I had the same problems as others that in HBOOT, the radio was "unknown". Unfortunately I didnt write down the original radio settings, so im not entirely sure what my device is.
Now with the latest CWM, I have a working radio, CWM and AndroRevolution 3.0 working brilliantly. Radio is being reported again as the EU version of .16
However what I wanted to know are the following questions:
1) Just a bit of confirmation; the boot.img dictates the radio, correct?
2) If yes, then is it possible to flash a different radio than the original? If no, then does this mean since my radio is confirmed and everything is working, my current radio _IS_ the correct one?
3) My region and provider has LTE support and my provider says I only need to enable it on my phone. However using the dialcode to access test settings and change through the modes, it keeps switching from any LTE reception back to something with WCDMA. I cannot even switch to GSM/WCDMA/LTE auto. It switches back within 2 seconds.
So what Im trying to ascertain here is, do I possibly have the wrong radio, and if I do is there a way to figure out what it should have been?
The other piece of the puzzle is that despite the unit is from Taiwain, the original language when i switched it on was German, which would suggest it is in fact a EU unit.....
Ive searched through many tools, apps, threads, specs, with no luck in answering the question.... Any help is greatly appreciated.
Paz
1. Boot.img is the kernel and has nothing to do with the radio
2. You can only flash different radio versions by either flashing an RUU or by S-OFF. Radio is a security protected partition. FLASHING A RADIO WILL NOT ENABLE 4G ON A NON 4G DEVICE!! The HOX+ Inrernational version is 3G only. So in answer to your question. Yes you can flash a new radio, but no you will never have 4G on an international hox+
AndroHero said:
1. Boot.img is the kernel and has nothing to do with the radio
2. You can only flash different radio versions by either flashing an RUU or by S-OFF. Radio is a security protected partition. FLASHING A RADIO WILL NOT ENABLE 4G ON A NON 4G DEVICE!! The HOX+ Inrernational version is 3G only. So in answer to your question. Yes you can flash a new radio, but no you will never have 4G on an international hox+
Click to expand...
Click to collapse
I do have S-OFF though, so is there a way to confirm if its the international version? The model is PM35110. Any reference online is always in Asian language, so hard to tell. I suppose international version really means all countries.
Bugger.... I bought this specifically for LTE support... :crying:
Paz75 said:
I do have S-OFF though, so is there a way to confirm if its the international version? The model is PM35110. Any reference online is always in Asian language, so hard to tell. I suppose international version really means all countries.
Bugger.... I bought this specifically for LTE support... :crying:
Click to expand...
Click to collapse
How did you get S-OFF? Do you mean an unlocked bootloader? because that's a different thing. Nand protection security flag, remains intact when unlocking bootloader. so write protected partitions like radio remain unaffected. Either way it's not a software issue. Its a hardware issue. The LTE device have different radio hardware not just software, So your device is either LTE ready or not.
AndroHero said:
How did you get S-OFF? Do you mean an unlocked bootloader? because that's a different thing. Nand protection security flag, remains intact when unlocking bootloader. so write protected partitions like radio remain unaffected. Either way it's not a software issue. Its a hardware issue. The LTE device have different radio hardware not just software, So your device is either LTE ready or not.
Click to expand...
Click to collapse
Er yes, you are not confused, i am. HBOOT is showing S-ON, so I must have been high on caffeine when I was sure I saw S-OFF at one point. However like I mentioned I was playing with the rootboot boot.imgs early on and I was pretty sure I saw S-OFF then. But incidentally that was also when the radio was "unknown" at that time.
Oh well, Im stateside for Xmas and will give my dad the international version and buy myself a new one.
Thanks for your help
p.
Paz75 said:
I do have S-OFF though, so is there a way to confirm if its the international version? The model is PM35110. Any reference online is always in Asian language, so hard to tell. I suppose international version really means all countries.
Bugger.... I bought this specifically for LTE support... :crying:
Click to expand...
Click to collapse
You're doing it so, so wrong.
A quick search of the model number reveals that it's the Endeavour C2. If you have an LTE version it would be Evitareul.
1) Wrong. Radios are flashed separately and are not packed into the boot.img.
2) It is possible but unless you are S-OFF you cannot flash one very easily.
3) The reason why is because your device does not support LTE.
Hunt3r.j2 said:
You're doing it so, so wrong.
A quick search of the model number reveals that it's the Endeavour C2. If you have an LTE version it would be Evitareul.
1) Wrong. Radios are flashed separately and are not packed into the boot.img.
2) It is possible but unless you are S-OFF you cannot flash one very easily.
3) The reason why is because your device does not support LTE.
Click to expand...
Click to collapse
Yes thanks
Radios are not .img files to be flashed, they're in /system/etc