Hi All,
First of all I would like to thank everyone at XDA who has invested their lives to make our phones look and work better day by day...
I am very confused right now and have been searching the whole internet for three weeks now but didn't got any solution as yet.
I have got a Motorola Atrix 4G from Korea that has the following information:
Model : MB860
S/W Version : 4.5.2A- SKT-167
Android Version : 2.3.5
Kernel Version : 2.6.32.9- 00004-gfbc 746e
My problem is that the stock rom currently installed is flooded with Korean language. I want to put a pure english stock rom into my Atrix that has all the stock options enabled. Which rom is suitable for this purpose and also as Korean SKT version doesn't have SBF files over the internet, therefore how can I restore to stock if things went into the wrong direction. BTW I have already rooted my phone.
While searching, found some files at "main.develoid.com:81/%40%20MOTOROLA/Atrix/" that I am not sure helpful for any thing or not.
Thanks in advance for all your help and support.
Ignore this and search for "how to know if my atrix is bell or ATT", then flash the proper sbf
ticiano_arraes said:
Ignore this and search for "how to know if my atrix is bell or ATT", then flash the proper sbf
Click to expand...
Click to collapse
Thanks for ur reply but I am already aware of this fact that my Atrix is not from any of these two i.e. ATT or Bell. My phone is from Korea and is from SK Telecom South Korea. It is a MB860 with SKT software version.
The SKT is the version of the rom. There are only 2 atrix models: ATT and Bell. It doesnt matter where are you from, my Atrix is Bell and we dont even have it in Brazil...
D-r-e-a-m-e-r said:
Hi All,
First of all I would like to thank everyone at XDA who has invested their lives to make our phones look and work better day by day...
I am very confused right now and have been searching the whole internet for three weeks now but didn't got any solution as yet.
I have got a Motorola Atrix 4G from Korea that has the following information:
Model : MB860
S/W Version : 4.5.2A- SKT-167
Android Version : 2.3.5
Kernel Version : 2.6.32.9- 00004-gfbc 746e
My problem is that the stock rom currently installed is flooded with Korean language. I want to put a pure english stock rom into my Atrix that has all the stock options enabled. Which rom is suitable for this purpose and also as Korean SKT version doesn't have SBF files over the internet, therefore how can I restore to stock if things went into the wrong direction. BTW I have already rooted my phone.
While searching, found some files at "main.develoid.com:81/%40%20MOTOROLA/Atrix/" that I am not sure helpful for any thing or not.
Thanks in advance for all your help and support.
Click to expand...
Click to collapse
unlock the bootloader, install CWM, upload the files to dropbox/mediafire, install any CM7 based roms
ticiano_arraes said:
The SKT is the version of the rom. There are only 2 atrix models: ATT and Bell. It doesnt matter where are you from, my Atrix is Bell and we dont even have it in Brazil...
Click to expand...
Click to collapse
I have googled but haven't been able to find anything useful regarding ATT and Bell. Have found a new info as the FCC ID for ATT and Korean Atrix are different
ATT Atrix 4G FCC ID: IHDP56LS1
My Korean Atrix 4G FCC ID: IHDP56LS2
I am not sure as if this has something to do but I considered it worth sharing...
See this: http://forum.xda-developers.com/showthread.php?t=1136261
I guess the proper sbf for your phone is where says
Orange/Bell/Telestra/Latin America/International users ONLY - Download IHOP
Click to expand...
Click to collapse
D-r-e-a-m-e-r said:
Hi All,
First of all I would like to thank everyone at XDA who has invested their lives to make our phones look and work better day by day...
I am very confused right now and have been searching the whole internet for three weeks now but didn't got any solution as yet.
I have got a Motorola Atrix 4G from Korea that has the following information:
Model : MB860
S/W Version : 4.5.2A- SKT-167
Android Version : 2.3.5
Kernel Version : 2.6.32.9- 00004-gfbc 746e
My problem is that the stock rom currently installed is flooded with Korean language. I want to put a pure english stock rom into my Atrix that has all the stock options enabled. Which rom is suitable for this purpose and also as Korean SKT version doesn't have SBF files over the internet, therefore how can I restore to stock if things went into the wrong direction. BTW I have already rooted my phone.
While searching, found some files at "main.develoid.com:81/%40%20MOTOROLA/Atrix/" that I am not sure helpful for any thing or not.
Thanks in advance for all your help and support.
Click to expand...
Click to collapse
Please remember that questions go in the Q&A section.
Contrary to what was posted earlier, there are three Atrix models (MB860, MB861, and ME860). But you seem to know which one you have already. Also, never flash an SBF unless you have no other choice.
Did you try going to Settings, Language & keyboard, Select locale and see if you can choose English? Might not work because I think that is the Korean GB235 software.
Is the device rooted with an unlocked bootloader? If so, you should be able to flash a AT&T stock fruit cake.
upndwn4par said:
Please remember that questions go in the Q&A section.
Contrary to what was posted earlier, there are three Atrix models (MB860, MB861, and ME860). But you seem to know which one you have already. Also, never flash an SBF unless you have no other choice.
Did you try going to Settings, Language & keyboard, Select locale and see if you can choose English? Might not work because I think that is the Korean GB235 software.
Is the device rooted with an unlocked bootloader? If so, you should be able to flash a AT&T stock fruit cake.
Click to expand...
Click to collapse
Thanks for your reply. My apologies for posting into the wrong section.
Right now my phone is rooted but not unlocked yet. I wanted to be safe before I can actually modify it. Least I could have a restore point to return. Thats why asking the experts for an advice.
My only issue is not the language but most of english characters are shown wrong whenever I receive a SMS. Can only have caller ID for SMS (contact numbers with +) or for the call (removing the + sign from all contact numbers). Can only send SMS with 80 characters otherwise it is converted into a MMS.
Instead of solving all these issues one by one, I believe installing a stock english rom would solve my problem. The only problem is that I am not sure which ROM can I use and what can I do if I end up into a soft brick phone.
Thanks again for taking the time to look into my problem.
D-r-e-a-m-e-r said:
Thanks for your reply. My apologies for posting into the wrong section.
Right now my phone is rooted but not unlocked yet. I wanted to be safe before I can actually modify it. Least I could have a restore point to return. Thats why asking the experts for an advice.
My only issue is not the language but most of english characters are shown wrong whenever I receive a SMS. Can only have caller ID for SMS (contact numbers with +) or for the call (removing the + sign from all contact numbers). Can only send SMS with 80 characters otherwise it is converted into a MMS.
Instead of solving all these issues one by one, I believe installing a stock english rom would solve my problem. The only problem is that I am not sure which ROM can I use and what can I do if I end up into a soft brick phone.
Thanks again for taking the time to look into my problem.
Click to expand...
Click to collapse
Text information will probably never display properly with the Korean OS. Probably a combination of language and carrier differences.
Flashing an English ROM will solve your problems. Be sure to follow instructions for unlocking the bootloader for the Korean Atrix in the dev section. You can install any custom ROM. You can also install a stock ROM, but may have to make changes to locale and APN settings - no biggie.
upndwn4par said:
You can also install a stock ROM, but may have to make changes to locale and APN settings - no biggie.
Click to expand...
Click to collapse
This is where I get lost ((((((((((
I have apmel experience of flashing my old HD2. I even did it with my eyes closed. Thanks to XDA for the load of development and user training.
Atrix is a little complex (or maybe I am more cautioned). Which stock english rom will work for me? I have also read within the forum that Korean Atrix can take Telstra Stock ROM but still I am not sure about it.
D-r-e-a-m-e-r said:
This is where I get lost ((((((((((
I have apmel experience of flashing my old HD2. I even did it with my eyes closed. Thanks to XDA for the load of development and user training.
Atrix is a little complex (or maybe I am more cautioned). Which stock english rom will work for me? I have also read within the forum that Korean Atrix can take Telstra Stock ROM but still I am not sure about it.
Click to expand...
Click to collapse
Just to be clear, when I say stock ROM I mean a fruit cake. Some associate stock with sbf. As I said before, never flash an sbf (OK, only once when unlocking your bootloader). I recommend flashing this fruit cake to get you started. If you are not on AT&T, look here for changing your APN. But the very next step you take will be to unlock your bootloader. Worry about the rest later.
Thx for everything
I will unlock the bootloader tomorrow.
For the ROM, are u advising me to flash stock ATT fruitcake. Would ATT software be compatible with my phone's hardware?
Plz accept my apologies for bring unnecessarily demanding but I am very cautioned about flashing my Atrix mainly as it lacks support from Motorola.
Thanks again...
Sent from my MB860 using xda app-developers app
Can I use the fruit cakes given within this link:
"forum.xda-developers.com/showthread.php?t=1163009"
Also right now I am on GB 2.3.5 and if I go for ATT GB 2.3.6 fruit cake, can I downgrade to 2.3.5 with my stock backup? What I have understood during all my search is that Atrix could get hard bricked if downgraded. Please advice.
D-r-e-a-m-e-r said:
Can I use the fruit cakes given within this link:
"forum.xda-developers.com/showthread.php?t=1163009"
Also right now I am on GB 2.3.5 and if I go for ATT GB 2.3.6 fruit cake, can I downgrade to 2.3.5 with my stock backup? What I have understood during all my search is that Atrix could get hard bricked if downgraded. Please advice.
Click to expand...
Click to collapse
make sure you make a CWM backup of your rom first and put it in dropbox/mediafire
D-r-e-a-m-e-r said:
Thx for everything
I will unlock the bootloader tomorrow.
For the ROM, are u advising me to flash stock ATT fruitcake. Would ATT software be compatible with my phone's hardware?
Plz accept my apologies for bring unnecessarily demanding but I am very cautioned about flashing my Atrix mainly as it lacks support from Motorola.
Thanks again...
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
D-r-e-a-m-e-r said:
Can I use the fruit cakes given within this link:
"forum.xda-developers.com/showthread.php?t=1163009"
Also right now I am on GB 2.3.5 and if I go for ATT GB 2.3.6 fruit cake, can I downgrade to 2.3.5 with my stock backup? What I have understood during all my search is that Atrix could get hard bricked if downgraded. Please advice.
Click to expand...
Click to collapse
Yes, AT&T fruit cakes will be compatible You can flash any fruit cake you want, you will just need to makes the changes I posted earlier.
The one thing I forgot to mention before: depending on your country and carrier, you may need to flash a different radio. Those are available at the Atrix Reboot Project.
Once your bootloader is unlocked you can flash or restore anything want. Your phone will be free!
arqda said:
make sure you make a CWM backup of your rom first and put it in dropbox/mediafire
Click to expand...
Click to collapse
Yep this is the only workaround I have to go stock if something went off the plan
Thanks for the tip though.
upndwn4par said:
Yes, AT&T fruit cakes will be compatible You can flash any fruit cake you want, you will just need to makes the changes I posted earlier.
The one thing I forgot to mention before: depending on your country and carrier, you may need to flash a different radio. Those are available at the Atrix Reboot Project.
Once your bootloader is unlocked you can flash or restore anything want. Your phone will be free!
Click to expand...
Click to collapse
Many thanks
I will start off with flashing process tomorrow and will post the results accordingly.
Finally I did it
I have unlocked the bootloader and complete backup of my phone with CWM and ROM Factory.
CWM has given me a folder full of 6 files and ROM Factory has given me a .zip file and a folder workdir.
I believe now I am on the safe side to flash custom ROMs.
People like me can head to this post that I have followed to do things forum.xda-developers.com/showthread.php?t=1302423
Many thanks upndwn4par for the sincere help.
Moreover I would also like to thank all the developers working hard to make our phones what they are really today... Really appreciated :good:
Please advise if my backup is accurate. Also direct me to the place where can I drop these files to help other users with a similar phone.
D-r-e-a-m-e-r said:
I have unlocked the bootloader and complete backup of my phone with CWM and ROM Factory.
CWM has given me a folder full of 6 files and ROM Factory has given me a .zip file and a folder workdir.
I believe now I am on the safe side to flash custom ROMs.
People like me can head to this post that I have followed to do things forum.xda-developers.com/showthread.php?t=1302423
Many thanks upndwn4par for the sincere help.
Moreover I would also like to thank all the developers working hard to make our phones what they are really today... Really appreciated :good:
Please advise if my backup is accurate. Also direct me to the place where can I drop these files to help other users with a similar phone.
Click to expand...
Click to collapse
Backup strategy is correct. The fruit cake won't work as is. Upload workdir or the zip to the Atrix Reboot Project and I'll fix it and put it back.
Edit: You can also post a dropbox link. Whatever works.
Edit 2:
Forgot to say congrats on unlocking your bootloader!
Also, could you post a link here?
http://forum.xda-developers.com/showthread.php?p=32514993#post32514993
Thanks!
Related
Hey,
I'm from Brazil and I just got an Atrix from a local operator.
The version is that one from the title.
I was just wondering if i can flash any other sbf (so I can eventually flash a gingerblur or something like that).
Thanks!
Second it, since I would probably be getting the same version (I'm from Argentina), Were you able to get root access?
i'll try it right now..
i just got the phone yesterday!!!
I'll post the results...
Can't root with superoneclick
it do not accept the OLYFR_U4_1.26 spf...
i think, by now, i'm stuck!!
Try the GladRoot script... not super 1 click... by all accounts the Atrix dev teams think that's a bad solution. That's a different fw version than the bell or at&t, so it still may not work.
Bump, did it work?
you can't flash a sbf from another carrier. if you did, you just lost your phone for being impatient and not reading the forums.
If these versions are so different and carried by others might the bootloaders be unlocked or are these operators from south america subsidiaries of att?
Sent from my MB860 using XDA Premium App
Strange...that version string is similar to the Canadian Bell Atrix (OLYLA_U4_0.37.4).
another no go... this time with GladRoot v4
psneuter failed
anyone, any sugestions?
franciscojavierleon said:
you can't flash a sbf from another carrier. if you did, you just lost your phone for being impatient and not reading the forums.
Click to expand...
Click to collapse
I know it would problably not work... I read about it...
but that's ok.. the phone just wont accept it, but it does before changing anything... so everything still works just as I bought it!
I can return it to the store if something goes whrong within 7 days... so that's why i'm not worried if something gets broken!
Chances are this version has all the current root methods patched, and will not be able to be rooted. I'd need a device to play around with to know for sure.
Perhaps the rest of the international versions are the same? what about the korean, or the Uk version?
YaPeL said:
Perhaps the rest of the international versions are the same? what about the korean, or the Uk version?
Click to expand...
Click to collapse
It's very likely this is the case as well. Again, without a device in front of me to test with it's hard to say. If someone wants to post a dump of the device I can look at that as well.
Ririal said:
It's very likely this is the case as well. Again, without a device in front of me to test with it's hard to say. If someone wants to post a dump of the device I can look at that as well.
Click to expand...
Click to collapse
If you can teach me how to dump, i`ll do it today!
And thanks for the reply! it`s always nice to have a quick reply from the developer himself!!!!
No one can make a quick tutorial on dumping?
Can be on windows, linux or osx.
Sent from my MB860 using XDA App
A quick search in google:
http://android.modaco.com/content/htc-desire-desire-modaco-com/308704/how-to-dump-the-rom-image/
I don't know if links to other sites are allowed, if not, then edit this post please.
Ririal said:
It's very likely this is the case as well. Again, without a device in front of me to test with it's hard to say. If someone wants to post a dump of the device I can look at that as well.
Click to expand...
Click to collapse
Hi,
I've created a dump using the information provided at the modaco link above. As I never did it before, I don't know if it's correct. I used the following command "busybox tar cvf dump.tar /system". Here is the link:
http://www.filesonic.com/file/820080431/OLYLA_U4_0.50.0.tar.7z
When I tried to flash SBF 1.5.2 I got the following message (at phone): "sec_exception: febe, 35, 35" (or something like that). I'll be happy to provide more information if needed.
Cheers,
Thiago Souza
Root for this SBF
Follow the guide in my signature. This should work for all future SBFs
BTW, I would update to the Telstra one which is leaps ahead of the SBF you guys have gotten.
Whats the diference between ours and the telestra?
Many improvments?
Under the telestra one can we flash custom sbfs?
Tks
Sent from my MB860 using XDA App
Hello guys,i am a complete novice to dell and have a dell streak 5 that is running android version
2.2.2
base band version GAUSB1A135100-EU.
kernel version
2.6.32.9-dj_steve-BFS-CFQ-KGSL2D-Vol-OC
oem version
190
build number
StreakDroid 1.9.0 from a DJ steve (on device when i purchased) and has basically ground to a Holt
I do not have much of an idea but i know that it needs updating.having read the forums about the updates my head is all over the place.
i ask please for a link to the correct firmware i need to flash.. and what i need to flash with the easiest way
Hope you can help me and point me in the right direction..I have took the time to read the forums but i still have no idea what i need for this device
as i have just received it.
Many many thanks in advance
Rather open-ended question because the correct firmware is going to vary depending on what you want to do. For instance, do you wish to revert to a stock ROM? Do you want to be as up to date as possible? Are certain features important to you?
I personally don't recommend going back to stock, but to go forward and get a custom gingerbread ROM. Check the development forum for four good ones: Longhorn 2.9.1, DSC 1.2, Cyanogenmod 7, and MIUI.
Strephon Alkhalikoi said:
Rather open-ended question because the correct firmware is going to vary depending on what you want to do. For instance, do you wish to revert to a stock ROM? Do you want to be as up to date as possible? Are certain features important to you?
I personally don't recommend going back to stock, but to go forward and get a custom gingerbread ROM. Check the development forum for four good ones: Longhorn 2.9.1, DSC 1.2, Cyanogenmod 7, and MIUI.
Click to expand...
Click to collapse
Hi and thanks for taking time to reply,I am going to go back to stock to keep it as simple as possible to move device on,if its running stock there can be no hassles for new owner,i have the dell stock gingerbread update.
I will do a factory reset prior to flash and then put update on root of sd then boot to recovery and install IS THAT CORRECT?
many thanks
sas007 said:
Hi and thanks for taking time to reply,I am going to go back to stock to keep it as simple as possible to move device on,if its running stock there can be no hassles for new owner,i have the dell stock gingerbread update.
I will do a factory reset prior to flash and then put update on root of sd then boot to recovery and install IS THAT CORRECT?
many thanks
Click to expand...
Click to collapse
no need to revert to stock then... streakdroid 1.9 is the best for 2.2.2... so whats the point on going back to stock...? all stock are not optimized at all and have many hidden and useless application in it...
last time i tried using the deodexed stock but still it is not enough and does drain the battery too... custom rom is way better...
but if you insist on going stock.. i am not stopping you.. do what ever you want.. also updating to stock gingerbread such as olleh 407 has its own problem too...
deysmacro said:
no need to revert to stock then... streakdroid 1.9 is the best for 2.2.2... so whats the point on going back to stock...? all stock are not optimized at all and have many hidden and useless application in it...
last time i tried using the deodexed stock but still it is not enough and does drain the battery too... custom rom is way better...
but if you insist on going stock.. i am not stopping you.. do what ever you want.. also updating to stock gingerbread such as olleh 407 has its own problem too...
Click to expand...
Click to collapse
Thanks for your help...if possible could you point me to the correct1.9 as i have no clue as so many roms and how do i apply it..I have read the threads and i am dizzy and to what i have to do as i have never been near a dell streak,never even knew they existed
so i will take that advice as i know your right i just thought stock would be easy to apply less hassle as i just want to get device up and running and stable.
again thank you for your help
sas007 said:
Thanks for your help...if possible could you point me to the correct1.9 as i have no clue as so many roms and how do i apply it..I have read the threads and i am dizzy and to what i have to do as i have never been near a dell streak,never even knew they existed
so i will take that advice as i know your right i just thought stock would be easy to apply less hassle as i just want to get device up and running and stable.
again thank you for your help
Click to expand...
Click to collapse
if your streak is currently working right now... dont try to do something.. ask someone who really knows instead... i mean physically...
here is the list of all available custom roms...
http://forum.xda-developers.com/wiki/Dell_Streak/ROMs
and stock roms...
http://forum.xda-developers.com/wiki/index.php?title=Dell_Streak#Official
be sure to use search next time... because everything that you wanted to know is already been answered numerous times ...
get to know this forum.. browse through it... read everything.... dont skip... no shortcut...
deysmacro said:
if your streak is currently working right now... dont try to do something.. ask someone who really knows instead... i mean physically...
here is the list of all available custom roms...
http://forum.xda-developers.com/wiki/Dell_Streak/ROMs
and stock roms...
http://forum.xda-developers.com/wiki/index.php?title=Dell_Streak#Official
be sure to use search next time... because everything that you wanted to know is already been answered numerous times ...
get to know this forum.. browse through it... read everything.... dont skip... no shortcut...
Click to expand...
Click to collapse
First thanks for you help and taking time to reply'second I have searched and read and as I said it is totally confusing for me as new to dell'some folks need to read why Xda started and about the journey'why do some folks get upset when others ask for help,not everyone is at the same level of android knowledge as others and therfore need a little help,I have helped many users on xda and never even thought are you stupid or what,can you not read...I have given it gladly as I was there once...
Help should be given willingly and without knowledge bias or you should not bother being on the site'just because you know more about a certain piece of kit does not give anyone the right to be all high and mighty...you know this thread inside out I do not so I asked for help.
Some folks need to take a look back at when thier journey into android started...did you ask for help??.have you never asked for help??
Again thanks
Sent from my ONDA MID using xda premium
sas007 said:
First thanks for you help and taking time to reply'second I have searched and read and as I said it is totally confusing for me as new to dell'some folks need to read why Xda started and about the journey'why do some folks get upset when others ask for help,not everyone is at the same level of android knowledge as others and therfore need a little help,I have helped many users on xda and never even thought are you stupid or what,can you not read...I have given it gladly as I was there once...
Help should be given willingly and without knowledge bias or you should not bother being on the site'just because you know more about a certain piece of kit does not give anyone the right to be all high and mighty...you know this thread inside out I do not so I asked for help.
Some folks need to take a look back at when thier journey into android started...did you ask for help??.have you never asked for help??
Again thanks
Sent from my ONDA MID using xda premium
Click to expand...
Click to collapse
to be honest... i dont know this thread inside out... i also use search you know... i dont bother asking for help.. because all the information is here... doing homework and it will get through one way or another...
sas007 said:
Hi and thanks for taking time to reply,I am going to go back to stock to keep it as simple as possible to move device on,if its running stock there can be no hassles for new owner,i have the dell stock gingerbread update.
I will do a factory reset prior to flash and then put update on root of sd then boot to recovery and install IS THAT CORRECT?
many thanks
Click to expand...
Click to collapse
I see from other posts that you are going to put 407 on the device and with this post why you're going that route is clear. Factory reset isn't required prior to flashing because flashing the ROM itself will wipe everything. What is required is that the stock recovery image for 407 be placed on the device before attempting to flash the ROM. Otherwise it won't work. I'm not going to go into detail on how to change the recovery image because there are sticky posts galore that have all the relevant info. A good thread to look at is in Streak 5 Android Development, titled "Everything you always wanted to know about the Streak but were too busy bricking it".
Strephon Alkhalikoi said:
I see from other posts that you are going to put 407 on the device and with this post why you're going that route is clear. Factory reset isn't required prior to flashing because flashing the ROM itself will wipe everything. What is required is that the stock recovery image for 407 be placed on the device before attempting to flash the ROM. Otherwise it won't work. I'm not going to go into detail on how to change the recovery image because there are sticky posts galore that have all the relevant info. A good thread to look at is in Streak 5 Android Development, titled "Everything you always wanted to know about the Streak but were too busy bricking it".
Click to expand...
Click to collapse
Hi mate thank you for your kind help,yes I have the stock recovery to flash first.the download contained both recovery and rom image.
I think I am about there with what to do...flash recovery with flashboot then boot to that recovery and install firmware from sd card having changed to update 'what I am still a little perplexed about is the region I think the firmware is 00,what do I need for U.K.
Thankyou again
Sent from my ONDA MID using xda premium
deysmacro said:
to be honest... i dont know this thread inside out... i also use search you know... i dont bother asking for help.. because all the information is here... doing homework and it will get through one way or another...
Click to expand...
Click to collapse
I get all that but I needed to ask...and folks should not be made to feel bad just because they have asked for help... I had no idea as to what to search for as I have never even seen a dell before,I assumed it would be as other androids get a stock rom and just flash but was hit with so many differant roms...ones for each region etc.l could not find a post that said LATEST STOCK ROM FOR U.K DELL STREAK 5 or anything like it,and it was a hell of a lot more complicated than I imagined so I was stuck and asked for help.Thankfully with the snippets of help I have been given I am more knowledgable now and even capable of flashing the device properly I hope...and if for some reason someone else needs to know the same I will pass on what I have learnt from you guys gladly to help a android user
Once again thank you for your help and infomation
Sent from my ONDA MID using xda premium
I just got an unlocked UK Dell streak and it was running the 351 firmware so I'm guessing that's the standard one
Sent from my GT-I9100 using xda app-developers app
Hayth said:
I just got an unlocked UK Dell streak and it was running the 351 firmware so I'm guessing that's the standard one
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
They are a lot of official roms, take a look here. Custom roms can be found here.
Hayth said:
I just got an unlocked UK Dell streak and it was running the 351 firmware so I'm guessing that's the standard one
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
That's what I needed to know "351 firmware"cheers guys...
Thanks for replying...
Sent from my ONDA MID using xda premium
sas007 said:
what I am still a little perplexed about is the region I think the firmware is 00, what do I need for U.K.
Click to expand...
Click to collapse
The country you are in and the carrier you are using do not matter when it comes to flashing a Streak ROM. All that matters is whether the region of the recovery matches the region of the ROM you are installing. Thus, for 407, you would need a region 14 recovery as 407 is a region 14 ROM. Unlocked Streaks purchased direct from Dell had their own region, 00. To flash one of those ROMs, e.g. 360, you would need a region 00 recovery.
I hope that clears things up.
I bought my streak from india and it has has rom 357
I want to ask tha can I install any rom on it or first I have to match region code or any thing else....please help
Sent from my Dell Streak using xda premium
all information gathered together
sas007 said:
Hello guys,i am a complete novice to dell and have a dell streak 5 that is running android version
2.2.2
base band version GAUSB1A135100-EU.
kernel version
2.6.32.9-dj_steve-BFS-CFQ-KGSL2D-Vol-OC
oem version
190
build number
StreakDroid 1.9.0 from a DJ steve (on device when i purchased) and has basically ground to a Holt
I do not have much of an idea but i know that it needs updating.having read the forums about the updates my head is all over the place.
i ask please for a link to the correct firmware i need to flash.. and what i need to flash with the easiest way
Hope you can help me and point me in the right direction..I have took the time to read the forums but i still have no idea what i need for this device
as i have just received it.
Many many thanks in advance
Click to expand...
Click to collapse
follow the link to the article that should help you : http://forum.xda-developers.com/showthread.php?t=1836662
Edit:
How to root:
I followed the directions in this thread.
http://teamuscellular.com/Forum/topi...2Bstock++tar
Except for the stock kernel I used the FF24 one. I uploaded to here:
https://www.dropbox.com/sh/usnhbh2n9ksj08s/VMAJKof_-C
This will get you root, but stay mostly stock.
Well I have a Generic Samsung Galaxy S2
Model: SCH-R760
Android version: 2.3.6
Baseband: S:R760.01 K.FF24
Kernel: 2.6.35.7-SCH-R760.XARFF24-CL1125314 [email protected] #2
Build: GINGERBREAD.XARFF24
I am looking for how to obtain root only. I believe this can only happen by flashing another Kernel, in which case I would like to know how to back up my current Kernel.
Any help with this would be great. I know source is available from Samsung, but I have not learned how to build from source yet.
Thanks,
Ralph McDade
BUMP Me too, exact model. Am wanting to root. Any one with any info on how?
to root it looks like you are going to have to flash another kernel. If you have US cellular there are backups and rooted kernels. If you are on another carrier, you can flash the us cellular kernel and then reprogram the phone for your carrier. The problem with this is depending on what kernel you are on, you may not be able to go back to stock.
I am working on contacting Samsung to see if I can get the stock software that is currently in my phone. I will keep you posted.
No, It's not a US Cellular phone
I understand that, mine isn't either. But it looks like we can use the kernel from the US cellular that has been rooted. Or wait till a one-click root comes out for 2.3.6. Which maybe never due to work being done for newer android phones. Sorry, who is your carrier. If we can find the stock Kernel we could modify it. Problem is Samsung has not release it, only the source.
Mine is [email protected] #2
My carrier is a local company called Pioneer Cellular. All of my stats (kernel, build etc) match yours exactly
---------- Post added at 07:31 PM ---------- Previous post was at 07:25 PM ----------
Is there a way to pull the kernel from the phone using odin?
I will let you know what I figure out. I am going to get in touch with my provider and see if they can provide the software. I doubt it though.
I have tried all of the one click solution none have worked.
stock kernel
mcdader said:
I will let you know what I figure out. I am going to get in touch with my provider and see if they can provide the software. I doubt it though.
I have tried all of the one click solution none have worked.
Click to expand...
Click to collapse
I may be able to get the latest stock kernel ACG uses. Let me see what I can find.
Any word yet on a way to root this puppy? I got one from MobileNation, a small regional carrier in western tennessee/western ky, and would like to root and try to get an ICS rom working on it.
dante2512 said:
Any word yet on a way to root this puppy? I got one from MobileNation, a small regional carrier in western tennessee/western ky, and would like to root and try to get an ICS rom working on it.
Click to expand...
Click to collapse
Yes, we have successfully rooted. Follow the instructions in the following post. If you are on FF24 instead of FF18 then download the stock FF24 from page 2 in the same thread (post # 25 by mcdader) instead of in step 3.
http://teamuscellular.com/Forum/top...-galaxy-s-ii-ff18/page__hl__+root++stock++tar
---------- Post added at 11:06 AM ---------- Previous post was at 10:20 AM ----------
Or follow the instructions in THIS post. They are the same as the ones above but with an FF24 link added to step 3.
Hey guys, I have got a generic CDMA sch-r760 and am looking to flash a custom kernel with cwm included. Any ideas where I can find one? Haven't had much luck okn finding mods for this. Can't get cwm to flash through ROM manager due to the model. I managed to root but am now looking for ROMs and kernels. Any help would be greatly appriciated.
Same Here
I have been unable to find one myself after searching thru gobs of forums.. Though i think i have found the stock "Generic" tar for the R760 (FF24) complete rom that is.....
coltlacey1 said:
Hey guys, I have got a generic CDMA sch-r760 and am looking to flash a custom kernel with cwm included. Any ideas where I can find one? Haven't had much luck okn finding mods for this. Can't get cwm to flash through ROM manager due to the model. I managed to root but am now looking for ROMs and kernels. Any help would be greatly appriciated.
Click to expand...
Click to collapse
i have root .. but i was wondering, have you found any roms and kernals ?? Alltel SCH-R760 .. ?? And how do i restore phone to original factory kernal, settings, ect .. ? i'm a big time NOB .. i don't know what i'm doing .. uhg .. HELP
Teamuscellular is theteamuscellular is the best forum for this phone.
mcdader said:
Teamuscellular is theteamuscellular is the best forum for this phone.
Click to expand...
Click to collapse
okay, thanks.. i'll check out Teamuscellular ..
unonice said:
okay, thanks.. i'll check out Teamuscellular ..
Click to expand...
Click to collapse
Yea there really isnt much on this phone. I havent had any luck. I have given up on it. Glad its not my phone! I just went and got an s3 yesterday
Idk know if its good or bad news, but to those on alltel. AT&T is currently in the process of acquiring ALL of alltel's asset's ,soo the life of our S2's is short...
Sent from my A100 using xda app-developers app
sch-r760 rooted, use on other cdma services?
So i have my us cellular galaxy s2 phone rooted with some app exnos abuse or something like that. What i am wondering is if there is some way to get this phone to work with other cdma services such as verizon, verizon prepaid, straight talk, or even U-Prepaid( i guess this is us cellular, but they wont let you use a us cellular contract phone... Say what!?) Just so we are all on the same page, i am very much a noob when it comes it flashes and kernals. I used to toy around with flashing basic verison phones so that they would run java apps, but thats about it(lg phones turned into super nintendo).
I have searched around, but the only thread i found asking this same thing had no solution and a bunch of ppl complaining how it was on the wrong forum. So i thought i could post here? I hope nobody minds overly much.
Anyway, if this is possible i would love to hear from someone maybe get me pointed in the right direction.
I aslo read that verizon will not add meid numbers to their database. Do you think it would be possible to take the ein and meid of a verizon basic phone and put them on my device? Would i be able to get 3g if i did ths or do you think they would view ot as a basic phone on verizon's zide?
For the MEID swap NO. It's basically your phones fingerprint, assigned to that device built in to the hardware . Although you could clone another phone if its the same,but that is a felony. So I wouldn't try it. But flashing to another carrier, would require the stock files for that particular device. I.e if ur going from say Alltel phone to USSC you could flash USSC stock file to your phone. But it would basically have to be the same model GS2>GS2 and hardware.etc
Sent from my A100 using xda app-developers app
really?
chicinwang said:
For the MEID swap NO. It's basically your phones fingerprint, assigned to that device built in to the hardware . Although you could clone another phone if its the same,but that is a felony. So I wouldn't try it. But flashing to another carrier, would require the stock files for that particular device. I.e if ur going from say Alltel phone to USSC you could flash USSC stock file to your phone. But it would basically have to be the same model GS2>GS2 and hardware.etc
Sent from my A100 using xda app-developers app
Click to expand...
Click to collapse
What so to clone the meid of one device i own to another device i own is a felony? I bet that freakin FCC is behind this!
That aside, i've seen people talking about scripts that allow a user to install a newer android version from a similar device on another network, then the script edits the back to be able to use uscc, is there any way i can manually edit these settings so that i can connect to another network? I'm sure i can convince someone at straight talk to add my meid to their cdma service if their towers see my device. What with that new thing they offer send u a sim card for any gsm phone. Can anyone point me in the right dicection on switching carriers this way?
Uhg sometimes text entry gets so glitchy on this thing, makes it hard to go back and chamge aomething when my curser is out of place five characters, this is my excuse for any the spwllig issues.
Hey guys, there are lots of threads out there which have motorola atrix bootloader unlock guides, but it is starting to get very confusing bc some instructions don't apply to some phones: I am a noob so can someone plz explain to me how to unlock my atrix bootloader and what are the prerequistes.... my atrix is on firmware version 4.5.141, system version is 4.5.141.MB860.ATT.enUS and it is on android 2.3.6
Thanks in advance, i would greatly appricate it if you could also post file download links.
Thanks again
Check out the unlock thread in general. Will work for att with your version.
pre4speed said:
Check out the unlock thread in general. Will work for att with your version.
Click to expand...
Click to collapse
link to the direction i should use plz thx
hotshot545 said:
Hey guys, there are lots of threads out there which have motorola atrix bootloader unlock guides, but it is starting to get very confusing bc some instructions don't apply to some phones: I am a noob so can someone plz explain to me how to unlock my atrix bootloader and what are the prerequistes.... my atrix is on firmware version 4.5.141, system version is 4.5.141.MB860.ATT.enUS and it is on android 2.3.6
Thanks in advance, i would greatly appricate it if you could also post file download links.
Thanks again
Click to expand...
Click to collapse
I want to do the same but I dont want to brick my Phone can you tell me when you finished whats your result and the guide that you use please i hace the same versión.
Enviado desde mi MB860 usando Tapatalk 2
Hey...m new to dis forum...can u please clarify me a doubt..? My doubt is..i have an atrix 4g at&t nd m using it india...i bought it in secnd hand and is sim unlocked...if I factory reset my atrix...will my fone get locked again??? Please reply...! :
Sent from my MB860 using xda premium
Kaaru said:
Hey...m new to dis forum...can u please clarify me a doubt..? My doubt is..i have an atrix 4g at&t nd m using it india...i bought it in secnd hand and is sim unlocked...if I factory reset my atrix...will my fone get locked again??? Please reply...! :
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=32277161#post32277161
Next time try searching first.
Also this is off-topic here, your question has absolutely nothing to do with bootloader unlock.
Anyways...thnx for d link!!
Sent from my MB860 using xda premium
I have been holding off because i have not been able to find anyone whose specfically tried this on this software version, if anyone has i would appriciate if you could give me some info how you did it and what files you used thx
Confirmed: Unlock Atrix 4G running 2.3.6
hotshot545 said:
I have been holding off because i have not been able to find anyone whose specfically tried this on this software version, if anyone has i would appriciate if you could give me some info how you did it and what files you used thx
Click to expand...
Click to collapse
I just performed this on my Atrix 4G that was running 2.3.6 Stock exactly 7 days ago. It was the first time I had ever done anything to my phone since the last AT&T update. I had root before the update, but it was taken away when I applied the update. Since Motorola doesn't want to do a major update for my phone (Boo to them!), I decided to try flashing CM7 Olympus, and now I wish I had done it sooner!
I didn't check the links above, but I followed these instructions to the letter: http://forum.xda-developers.com/showthread.php?t=1302423
The process made me nervous, but it worked perfectly!
EDIT: Those are the closest instructions I could find to the original ones I had. I found the ones I actually used on Atrix Forums' website. The article is called "[TUT]Unlocking Bootloader and Installing Custom ROMs" (I'm too new to link to an external site due to forum regulations.)
Unlocked same version from ATT
I had to flash 4.1.83 sbf. The regular unlock process. But be careful as it could brick your phone. I experimented and luck was on my side.
Thanks,
Jinesh
twomoses said:
I just performed this on my Atrix 4G that was running 2.3.6 Stock exactly 7 days ago. It was the first time I had ever done anything to my phone since the last AT&T update. I had root before the update, but it was taken away when I applied the update. Since Motorola doesn't want to do a major update for my phone (Boo to them!), I decided to try flashing CM7 Olympus, and now I wish I had done it sooner!
I didn't check the links above, but I followed these instructions to the letter: http://forum.xda-developers.com/showthread.php?t=1302423
The process made me nervous, but it worked perfectly!
EDIT: Those are the closest instructions I could find to the original ones I had. I found the ones I actually used on Atrix Forums' website. The article is called "[TUT]Unlocking Bootloader and Installing Custom ROMs" (I'm too new to link to an external site due to forum regulations.)
Click to expand...
Click to collapse
http://www.atrixforums.com/forum/mo...ocking-bootloader-installing-custom-roms.html
is that the link
hotshot545 said:
http://www.atrixforums.com/forum/mo...ocking-bootloader-installing-custom-roms.html
is that the link
Click to expand...
Click to collapse
That is the one!
twomoses said:
That is the one!
Click to expand...
Click to collapse
Followed those instructions as well. I feel like I am very close to having my phone back to where it needs to be for me to consider the mission a success I am only experiencing an issue adding Google accounts and getting into the android Market. I did a titanium backup restore and got all of my apps back and restored system settings, but Gmail crashes every time I try to open it and the Market opens a white window then goes away without any warning or error info.
I haven't flashed a custom rom so I am still in the stock Gingerbread ROM.
Trying to add a Google account gives me the message "Can't Establish a reliable connection..." If I followed this guide, am I fine to do a hard reset, as that is the only solution I have found online to the Can't Establish connection error?
Original Post Deleted: Oops moment
If your intentions were to flash a custom rom, I would perform a nandroid backup and then flash away following the instructions you've been using.
If you unlocked the bootloader, your phone was probably returned to stock just like performing a hard reset. Google Play (or Market) usually needs a very good connection to run its first update, so if you're not on wifi, connect to that first. If you still have that problem, try clearing the data for that app (from the home screen > Menu > Manage Applications > "Market" > Clear Data)
If you were trying to flash a fruitcake (to return it to stock after flashing a custom ROM), still try clearing the app data and, if that doesn't work, try flashing the fruitcake again.
Hi all
I apologize for my bad English. I own a Sprint Photon, of course, and I live outside the U.S.. I bought the Photon from ebay and who sold it has installed Electrify rom that you see in the screen attached. I would like to try other roms, but I'm totally noob with Android, it's my first Android, so I want to know how not to brick my phone. When the Photon starts, there is written at the top, unlocked.
There is the CWM backup and a recovery 1FF-sunfire-user-2.3.5-4.5.1A_SUN_USC_19.0-19-release-keys-signed-USC-US.zip
Can anyone help me or give me a link?
Thanks in advance
Darkane
PS: I have also installed a version of Ubuntu webtop, I would like to remove it since I do not use
darkane said:
Hi all
I apologize for my bad English. I own a Sprint Photon, of course, and I live outside the U.S.. I bought the Photon from ebay and who sold it has installed Electrify rom that you see in the screen attached. I would like to try other roms, but I'm totally noob with Android, it's my first Android, so I want to know how not to brick my phone. When the Photon starts, there is written at the top, unlocked.
There is the CWM backup and a recovery 1FF-sunfire-user-2.3.5-4.5.1A_SUN_USC_19.0-19-release-keys-signed-USC-US.zip
Can anyone help me or give me a link?
Thanks in advance
Darkane
PS: I have also installed a version of Ubuntu webtop, I would like to remove it since I do not use
Click to expand...
Click to collapse
None can help me? :crying:
With your phone unlocked, you should have no trouble installing the roms posted in the development sub forum. Essentially all you should have to do is place the zip of the rom in a folder on your site card and flash through CWM. However each rom has specific instructions, so read and reread carefully.
Each person has their own tase for roms and no one is going to tell you that there is one best rom, I'm using CM7 right now, after having CM10 installed for a while.
Sent from my MB855 using xda app-developers app
That actually looks like stock Android for the electrify. Are you sure you are running a custom rom? Are you sure you got a photon? Some people list items wrongly in ebay so you should check those two things before going flashing anything
Sent from my MB855 using xda app-developers app
That screenshot reeks of a US Cellular SBF that has been floating around but if it says unlocked you might be okay.
Install the CWM, do a nandroid then grab a known-working non-stock ROM from the dev forum. See what happens. As long as it stays unlocked you can fix it.