Hi All ,
this is my first time to flash a custom ROM .
yesterday i flashed a JeallyBam ( JellyBam.AOKP.20121005-DAILY-i9100G ) .
i have an international samsung i9100 .
as you have now figured , i have flashed the wrong rom for my mobile ( the rom is for i9100g , while my mobile is i9100 ) .
after flashing , and the mobile reboots , i canot pass the Samsung Galaxy S II (with yellow triangle) screen and for some reason i can not load into recovery anymore! loading to download mode works fine.
after researching , i know that the yellow triangle icon is for the ClockWorkMod .
so , i thought if i change that kernel , it may be fine .
i have then installed Siyah kernel v4.1.5 , but i can not also go to recovery mode .
when installing stock samsung rom ( 4.0.3 or even 4.0.4 ) the operation hang on writing FACTORYFS.img file , and it eventually fails with red icon in ODIN 1.85 .
last trial is to install stock kernel for 4.0.4 ( http://hotfile.com/dl/165094518/319d54b/KERNEL_XWLPT.tar.html )
found from this post :
http://forum.xda-developers.com/showthread.php?t=1544487
and i then tried to install the I9100XWLPX officail stock samsung rom , but with the same results .
all i can do with my mobile now is to go to download mode , and sometime i can go to recovery mode .
the issue is now i can not write any ROM into the phone , even the stock one .
please help me into restoring my phone to a working state .
So if you can go to recovery do full wipe. Or try to format everything but you lost data. And then install stock Rom
Send form Galaxy S2. Using XDA Premium
You need to flash stock firmware with .pit file.
Follow the guide here: forum.xda-developers.com/showthread.php?t=1457458
does not work also
Jokesy said:
You need to flash stock firmware with .pit file.
Follow the guide here: forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
i downloaded the rom , and here is what i have done :
the zip contains the following :
GT-I9100-MULTI-CSC-OXALPH.tar.md5 ==> used in CSC button
I9100_CODE_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 ==> used in PDA button
MODEM_I9100XXLPH_REV_02_CL1104396.tar.md5 ==> used in phone button
I9100_APBOOT_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 ==> not used ( don't know what is this )
as i see also , there is no .pit file in the rom .
the issue is the same here , flash hangs on writing factoryfs.img
please advise
damanhoury said:
i downloaded the rom , and here is what i have done :
the zip contains the following :
GT-I9100-MULTI-CSC-OXALPH.tar.md5 ==> used in CSC button
I9100_CODE_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 ==> used in PDA button
MODEM_I9100XXLPH_REV_02_CL1104396.tar.md5 ==> used in phone button
I9100_APBOOT_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 ==> not used ( don't know what is this )
as i see also , there is no .pit file in the rom .
the issue is the same here , flash hangs on writing factoryfs.img
please advise
Click to expand...
Click to collapse
get this pit file here
it works now
Jokesy said:
get this pit file here
Click to expand...
Click to collapse
it seems the issue was with the USB port in the PC .
i now have flashed a stock 4.0.4 into the mobile successfully .
thanks you so much for your support so far .
but the goal which have bring me here is not achieved yet , install jellybam on my S2 .
do you know where to download this ROM in Odin format , instead of this hassle of installing the ROM using Clockworkmod ??
damanhoury said:
it seems the issue was with the USB port in the PC .
i now have flashed a stock 4.0.4 into the mobile successfully .
thanks you so much for your support so far .
but the goal which have bring me here is not achieved yet , install jellybam on my S2 .
do you know where to download this ROM in Odin format , instead of this hassle of installing the ROM using Clockworkmod ??
Click to expand...
Click to collapse
You are definitely going to use CWM recovery.
Stop blaming CWM recovery!.CWM recovery was not the reason why you flashed GT I9100G ROM. blame yourself for that and you should count yourself lucky for still having a usable device.
First flash a custom kernel, Siyah or Speedmod via odin.
Now its working
thanks for your recommendation of installin siyah kernel .
Now i'm running SGS2-Intact-AOSP successfully on my Sii .
but the big issue for me now , is Facebook sync , it is not available
damanhoury said:
thanks for your recommendation of installin siyah kernel .
Now i'm running SGS2-Intact-AOSP successfully on my Sii .
but the big issue for me now , is Facebook sync , it is not available
Click to expand...
Click to collapse
use some third party apps from store which can do the same for u
kernel patch
i have heard that there is some JB roms are patched with the Facebook sync enabled .
so , may i ask if any one know where to get this kernel patch for SGS2-Intact-AOSP ?
damanhoury said:
i have heard that there is some JB roms are patched with the Facebook sync enabled .
so , may i ask if any one know where to get this kernel patch for SGS2-Intact-AOSP ?
Click to expand...
Click to collapse
I don't think so.
I think The Facebook patched only existed on some ICS AOKP ROMs. The patch is also not kernel related.
On JB ROMs, you have to rely on third-party Facebook apps for sync.
Related
):
i have a galagsy s2 i9000
a long time ago i rooted it
and today i have installed the Resurrection Remix ICS PRO Edition v1.0
rom
i wanted to install some zips..but the recovery mode changed and i couldnt do
it...
soo i tried to root the phone agin..with this guide
http://forum.xda-developers.com/show....php?t=1056334
after the odin finished the phone got stuck in the screen whith the i9000
title and the warning triangle...
im lost... pleaese please please...
if someone can help me i will rilly appreciate it ):
Can you get into download mode ?
yes i can...
thanks for helping ...
Go into download mode and use one click odin to flash stock rom..don't worry u will be fine as long as u able to go into download mode...
Sent from ........ using xda premium
how do i flash stock rom with odin ?
sorry .. but just dont wrily know...
Have a look at this thread to find a rom which matches your country/carrier. There is a guide to using Odin in that thread as well. If the download links don't work, write down the name of the stock rom you want to use & search for it on Samfirmware.com & download it there.
it says near my packege
"This is still BETA firmware so don't moan if everything doesn't work. It comes with old bootloader and is non-wipe"
is it still ok to go with it ??
Which package ?
XXLPJ
and agin thanks for helpin...
That's Ok I recommend you go back to stock Gingerbread, and then have another go at ICS. XXLPJ is stock ICS, you can use it, but as the warning says, it is a beta.
I'd use a GB stock rom for your country/carrier if were in your situation.
i dont understand
what is stock Gingerbread ??
an what is GB stock ??
my carrier is orange, israel ....
which package in the guide should i use ??
GB & GingerBread are one in the same.
Choose Israel Orange stock from from this thread http://forum.xda-developers.com/showpost.php?p=14505996&postcount=3
Use ODIN to flash
READ this http://forum.xda-developers.com/showpost.php?p=13712988&postcount=1 post for flashing with ODIN it should give you the information YOU need.
ttttttttttthhhhhhhhaaaaaannnnkkk yyoouu alll !!!!!
please if you can just show me a good rootin guide
other then :
http://forum.xda-developers.com/showthread.php?t=1056334
ill be thakfull
thank yoouuu i got my phone back
o and i wanted to ask do i have to root each time i change a rom ?
do i have to root when i change karnel ?
and is changin karnel is with odin ?
realy thanks for evrything
Glad you got it sorted
When flashing other roms or kernels, follow the instructions for flashing that rom or kernel to the letter & you shouldn't have problems.
Most custom kernels (all ?) are rooted, so you don't have to root again after installing them. And most custom kernels are flashable via CWM, tho many do have Odin flashable versions. My advice would be to stick to CWM flashable versions as this is the simplest way to flash a rom or kernel.
thanks agin...
thats what is used before
http://forum.xda-developers.com/showthread.php?t=1436854
and my cwm just disapred how do i know
if its an odin flashable virsion or a cwm virsion ?
Hello guys ,, I have downloaded VK ICS ROM V5.1.3 and i have put it in the internal memory of my device. I am now on the previous version of the same rom V5.1.2 , when i want to flash the new rom in the recovery mod,, it takes only few seconds no more than five seconds and says the installation was successful but actually when i reboot the phone, it stops on the first Logo which appears in the beginning of the Restart process. Although i do all the wipes before i start to flash the rom, i am unable to flash it
Plz help me
Guys I need help please
Flash thru odin instead, that might work
St0rmzx said:
Flash thru odin instead, that might work
Click to expand...
Click to collapse
the file is not appropriate except for rocoverymod so how can i flash it throw Odin !!!!!!
Flash to stock then flash to the new version, make sure the file isn't corrupted.
St0rmzx said:
Flash to stock then flash to the new version, make sure the file isn't corrupted.
Click to expand...
Click to collapse
I did that but still doesn't work
Guys !!!!!!! heeeeeeeeeeeeelp
Hi,
Did you tried another rom?
Flash a new kernel, (siyah) then re-download the rom and flash again
ruicc said:
Hi,
Did you tried another rom?
Flash a new kernel, (siyah) then re-download the rom and flash again
Click to expand...
Click to collapse
yes bro different roms are normally installed and i even changed my kernel to siyah but still the problem occurs !! the previous version which is 5.1.2 gets flashed normally,
Note:
I flashed to an official 4.0.3 rom and then rooted my device to flash this rom but doesn't work and i have this problem only with this version of VK roms other roms are okay ,,, even the Rom file (zip) is okay not corrupted !!
Hi everyone. I have rooted my phone with Exynosabuse and flashed CWM Recovery with ROM manager premium, then I unrooted my phone and uninstalled rom manager, but still stuck with CWM Recovery. My question is how to return to stock recovery? ( thanks in advance for any help ) also can I update my s3 via KIES while having this CWM recovery? ( notice that my phone now is unrooted )
flash stock ROM using odin
one more question
XeactorZ said:
flash stock ROM using odin
Click to expand...
Click to collapse
Thanks
But one more request, can u get me a link for leaked official 4.1.2 jelly bean rom for s3? I will be very thankful if u fetched my one.
Btw my baseband (I9300XXDLID ) if u need it.
u take recovery.img from stock rom..flash it using mobile odin...
Mostafa Wael said:
Hi everyone. I have rooted my phone with Exynosabuse and flashed CWM Recovery with ROM manager premium, then I unrooted my phone and uninstalled rom manager, but still stuck with CWM Recovery. My question is how to return to stock recovery? ( thanks in advance for any help ) also can I update my s3 via KIES while having this CWM recovery? ( notice that my phone now is unrooted )
Click to expand...
Click to collapse
Read the returning to a warranty state post .
Basics as posted multiple times are .
Run Triangle Away .
Flash stock rom
Factory reset .
jje
Wrong section, post in QA
Mostafa Wael said:
Thanks
But one more request, can u get me a link for leaked official 4.1.2 jelly bean rom for s3? I will be very thankful if u fetched my one.
Btw my baseband (I9300XXDLID ) if u need it.
Click to expand...
Click to collapse
leaked official 4.1.2 ????
just go sammobile website search and download for your country if you want
else flash any country version also okay
Just use kies, it's safer and easier...
About how much percent ODIN can fail in flashing rom to s3? Still didnt receive updates on KIES so i want to flash it via ODIN. Also how many time ddoes it take for ODIN to complete flashing??
Get the galaxy s3 toolkit. It includes odin and a copy of the stock recovery you can flash.
Flashing the recover with odin takes under a minute. Flashing a complete rom with odin takes about 5 minutes maximum.
Sent from my GT-I9300 using xda app-developers app
Mostafa Wael said:
About how much percent ODIN can fail in flashing rom to s3? Still didnt receive updates on KIES so i want to flash it via ODIN. Also how many time ddoes it take for ODIN to complete flashing??
Click to expand...
Click to collapse
0% fail if you follow the instruction
just need samsung kies (you need the usb driver, not kies because install samsung kies will automatically install the driver also)
and odin and the ROM (in .tar or .tarmd5, depends, confirm is end with .tar and put in pda
and take less than 10 minutes
flashed my s3 via mobile ODIN pro and it worked like a charm.....
Finally flashed my phone, but with mobile ODIN pro. My question is how to get the 4.2 camera on jelly bean 4.1.2 XXELKC. ? Thanx for all your help guys. ..
Flash a custom rom with the mod .
See Android Development Omega rom for one .
Or find the files and push them yourself to the custom rom .
Have a look in Themes and apps and see if its also posted as a standalone mod .
jje
Mostafa Wael said:
Hi everyone. I have rooted my phone with Exynosabuse and flashed CWM Recovery with ROM manager premium, then I unrooted my phone and uninstalled rom manager, but still stuck with CWM Recovery. My question is how to return to stock recovery? ( thanks in advance for any help ) also can I update my s3 via KIES while having this CWM recovery? ( notice that my phone now is unrooted )
Click to expand...
Click to collapse
personnaly i do it with mobile odin a choose the firm i want and remove all letting just recovery
ultimarom flashing. .
Noob question:
it's said that ultimarom can be flashed using clockworkmod recovery 6.0.1.2 or 6.0.1.9. I have 6.0.2.7. Can I Flash ultimarom using this version ? Thanks for all xda-developers members helping me
Mostafa Wael said:
Noob question:
it's said that ultimarom can be flashed using clockworkmod recovery 6.0.1.2 or 6.0.1.9. I have 6.0.2.7. Can I Flash ultimarom using this version ? Thanks for all xda-developers members helping me
Click to expand...
Click to collapse
It depends upon the instructions for that rom you need to read them .
But CWM recovery flash is the norm for most custom roms .
jje
Stock Recovery
If you just want the Stock Recovery for example for OTA, just flash the stockrecovery.tar via ODIN. Even I don't like using ODIN too much, but it's a million times better than Kies and easy to use. I personally recommend using ODIN on the PC if possible and avoid Mobile Odin. Mobile Odin is only if you don't have a PC or really need to do something on the go. It's a great app but don't use it all the time. And I'm not sure about this but I think by just flashing the Recovery you won't loose root nor Data, so you save a lot of time!
Only crappy thing with Odin is that it needs TAR and I don't know how to make those excpet with Toolbox. Does anybody know an easy way to make a flashable tar on windows without toolbox or cygwin (linux).
[
Only crappy thing with Odin is that it needs TAR and I don't know how to make those excpet with Toolbox. Does anybody know an easy way to make a flashable tar on windows without toolbox or cygwin (linux).[/QUOTE]
Probable found in the development and hacking section of xda developers forum .
jje
mega bass beat option
I've read about the "flashing mega bass beat option to s3" and it says
-- install zip from sdcard
-- chose zip from sdcard
-- wait for installation to complete
-- wipe cache partition
-- wipe dalvik cache
-- wipe fix permissions
The question is: what will happen if I didn't wipe the dalvik cache?
Do I really need to wipe it?
Glebun said:
Wrong section, post in QA
Click to expand...
Click to collapse
Then what is this? Is it some another forum?
Welcome . New thread with tutorial how to come back from JB to GB .
First you need Odin to flash your phone . If you're here you propably have got one . I recomend 3.04 or higher or 1.86 version .
1.Connect your phone to PC with Odin Flash Mode (home+ volume down + power during start )
2.In the Odin select PIT , CSC , PDA Files from pack :
http://disk.yandex.com/public/?hash=CXISs198rZIJtpzWXood+waVEXcxGbW4T1iWMkicox0=
http://d-h.st/AZN
It's only one rom with all working files i found in the internet .
It's Rom for Russia (SEB) and will change your region code .
3. Flash
4.Welcome on GB again . For sure to the time of full release of JB .
PIT File only :
https://www.box.com/s/1e4su0r4h3n0xl5ae8r7
(You can try to flash one file rom . It's can work . Maybe . But more safe metod is using full SEB Rom )
FIRST YOU NEED TO FLASH USING SEB ROM IN POST , THEN ANY GB YOU WANT !
Q and A
1.Did I can flash any GB ROM using one file rom and the added PIT File ?
A:No , you can't . First you need reflash your phone using russian 3 file rom , after this you can do everything you want .
2. It's working ?
If you know what is Odin , how to flash and doing everything like in this how to , for sure this is working .
It contains CSPA, EFS, UMS.
What for ?
Is full GB firmware applicable?
Dr01nE said:
Is full GB firmware applicable?
Click to expand...
Click to collapse
It's for sure working . Because this rescue , me after JB flash . If you will install first this Russia ROM then you can flash Rom for your localization without problems
Using the above linked PIT together with a firmware for Europe (so starting with XX...; exactly the XXLL2) didn't bring me back to GB. Flashing worked fine, but afterwards the device had a bootloop (stopped at Samsung's logo) and booting into <3e> (Samsung's recovery OS) wasn't possible.
So I'll try with the "russian" firmware now.
how is this different form previous stock versions?
Hi friends,
Is there something you changed in the PIT files for this?
What will happen if I have JB and I take a stock UK LL2 f/w from samfirmware and flash it?
thanks in advance...
jeev_one said:
Hi friends,
Is there something you changed in the PIT files for this?
What will happen if I have JB and I take a stock UK LL2 f/w from samfirmware and flash it?
thanks in advance...
Click to expand...
Click to collapse
Your phone will stuck on Ace 2 Screen .
First you need to flash using Russian Rom then you will be able to flash using UK Rom with change the regio code .
No , PIT File is original without any mods .
mann you r the best!! big thanks! +1
michal_ag said:
Your phone will stuck on Ace 2 Screen .
First you need to flash using Russian Rom then you will be able to flash using UK Rom with change the regio code .
No , PIT File is original without any mods .
Click to expand...
Click to collapse
thanks....also I've just downloaded PIT creator from
http://forum.xda-developers.com/showthread.php?t=1916936
Do you think it will help?
How do i create a UK ROM PIT for myself and avoid "falling into it" ?
regards,
jeev
@jeev_one
If I'm not mistaken,the pit file is the same for the entire Europe.
The problem is UK rom which does not contains all files needed.
Only Russia ROM contains all files needed to downgrade to GB.
jeev_one said:
thanks....also I've just downloaded PIT creator from
http://forum.xda-developers.com/showthread.php?t=1916936
Do you think it will help?
How do i create a UK ROM PIT for myself and avoid "falling into it" ?
regards,
jeev
Click to expand...
Click to collapse
The Problem isn't PIT File . It's universial for GB Roms . Problem is that you need to use 2 file ROM . Only one I found in the internet is this from Russia . Faster way is to install SEK Rom from first post . Then Reflash UK Rom and change Regional Code using *#272*IMEI# .
michal_ag said:
Welcome . New thread with tutorial how to come back from JB to GB .
First you need Odin to flash your phone . If you're here you propably have got one . I recomend 3.04 or higher or 1.86 version .
1.Connect your phone to PC with Odin Flash Mode (home+ volume down + power during start )
2.In the Odin select PIT , CSC , PDA Files from pack :
http://disk.yandex.com/public/?hash=CXISs198rZIJtpzWXood%2BwaVEXcxGbW4T1iWMkicox0%3D
http://d-h.st/AZN
It's only one rom with all working files i wound in the internet .
It's Rom for Russia (SEB) and will change your region code .
3. Flash
4.Welcome on GB again . For sure to the time of full release of JB .
PIT File only :
https://www.box.com/s/1e4su0r4h3n0xl5ae8r7
(You can try to flash one file rom . It's can work . Maybe . But more safe metod is using full SEB Rom )
FIRST YOU NEED TO FLASH USING SEB ROM IN POST , THEN ANY GB YOU WANT !
Click to expand...
Click to collapse
Thanks man, you're great
I'm back to GB now!
Cant download from your yandex link. Server cuts me off.
Dr01nE said:
Cant download from your yandex link. Server cuts me off.
Click to expand...
Click to collapse
Try the alternate link (dev-host link). See the first post.
I downloaded from the 2nd (dev-host) link through orbit (download manager)
If i flashed this firmware .. Can i flash another GB firmware ? E.g : Indonesia firmware ?
Maybe u can beat me in English , but im not sure that u can beat me in mandarin
Rikxzdjz said:
If i flashed this firmware .. Can i flash another GB firmware ? E.g : Indonesia firmware ?
Maybe u can beat me in English , but im not sure that u can beat me in mandarin
Click to expand...
Click to collapse
I flashed this GB rom and then after that I flashed Polish GB rom. My phone is from Poland.
Sent from my GT-I8160 using xda app-developers app
omer7 said:
Try the alternate link (dev-host link). See the first post.
I downloaded from the 2nd (dev-host) link through orbit (download manager)
Click to expand...
Click to collapse
I don't see dev-host link anywhere in this thread
Sent from my GT-I8160 using xda app-developers app
michal_ag said:
http://d-h.st/AZN
Click to expand...
Click to collapse
Here it is...
Sent from my GT-I8160 using xda app-developers app
It worked like a charm. Thank you so much. JB was draining my battery too fast.
michal_ag said:
Welcome . New thread with tutorial how to come back from JB to GB .
First you need Odin to flash your phone . If you're here you propably have got one . I recomend 3.04 or higher or 1.86 version .
1.Connect your phone to PC with Odin Flash Mode (home+ volume down + power during start )
2.In the Odin select PIT , CSC , PDA Files from pack :
http://disk.yandex.com/public/?hash=CXISs198rZIJtpzWXood+waVEXcxGbW4T1iWMkicox0=
http://d-h.st/AZN
It's only one rom with all working files i found in the internet .
It's Rom for Russia (SEB) and will change your region code .
3. Flash
4.Welcome on GB again . For sure to the time of full release of JB .
PIT File only :
https://www.box.com/s/1e4su0r4h3n0xl5ae8r7
(You can try to flash one file rom . It's can work . Maybe . But more safe metod is using full SEB Rom )
FIRST YOU NEED TO FLASH USING SEB ROM IN POST , THEN ANY GB YOU WANT !
Q and A
1.Did I can flash any GB ROM using one file rom and the added PIT File ?
A:No , you can't . First you need reflash your phone using russian 3 file rom , after this you can do everything you want .
2. It's working ?
If you know what is Odin , how to flash and doing everything like in this how to , for sure this is working .
Click to expand...
Click to collapse
Thank you for this, will try as soon as download completes, JB is awesome but still unstable.
Edit: worked great, flashed Russian ROM first, then Polish LL8.
Notes:
- for other noobs like me, the CODE goes to PDA in ODIN
- as mentioned above, after you flash the second ROM, set the regional code by using *#272*IMEI# (generic EU is XEO I believe, it's what I had before I went to JB).
Hello,
1- sorry for my English
2- I have got galaxy GT - I9300 , I was able to connect to ( Samsung Kies ) and ( Odin3 )
3- I un-rooted the phone and upgraded it to Jellybean 4.2.2
4- Now I can't connect to both of ( Samsung Kies ) or ( Odin3 )
5- I installed different drives and they all failed
6- I still can see my phone connected to PC as portable media player ? it appears in the device manager ( GT - I9300 )
7- I need to know how to come back to the original firmware ( step by step )
8- am I supposed to uninstall kies and driver before starting ?
9- Finally , Does ( Samsung_Galaxy_S3_ToolKit_v7.0 ) concerned with original firmware or custom roms ?
thanks
Mishoo66 said:
Hello,
1- sorry for my English
2- I have got galaxy GT - I9300 , I was able to connect to ( Samsung Kies ) and ( Odin3 )
3- I un-rooted the phone and upgraded it to Jellybean 4.2.2
Their is no upgrade to 4.2.2
What how did you upgrade Kies OTA what firmware .
Post in black difficult to read this colour .
Do you have I9300 ??
jje
Click to expand...
Click to collapse
JJEgan said:
Mishoo66 said:
Hello,
1- sorry for my English
2- I have got galaxy GT - I9300 , I was able to connect to ( Samsung Kies ) and ( Odin3 )
3- I un-rooted the phone and upgraded it to Jellybean 4.2.2
Their is no upgrade to 4.2.2
What how did you upgrade Kies OTA what firmware .
Post in black difficult to read this colour .
Do you have I9300 ??
jje
Click to expand...
Click to collapse
I have samsung galaxy s3 I9300 , with firmware 4.2.2 ( Jelly Bam 7.5.0 )
I want to go back to the original firmware
thanks
Click to expand...
Click to collapse
Mishoo66 said:
JJEgan said:
I have samsung galaxy s3 I9300 , with firmware 4.2.2 ( Jelly Bam 7.5.0 )
I want to go back to the original firmware
thanks
Click to expand...
Click to collapse
So your original post is wrong .
I un-rooted the phone and upgraded it to Jellybean 4.2.2
Not an update a custom rom .
Millions of posts on here how to go back TUTS stickys how to films books even a play .
Did you bother looking reading the faqs and guides ???
http://forum.xda-developers.com/showthread.php?t=1978840
jje
Click to expand...
Click to collapse
JJEgan said:
Mishoo66 said:
So your original post is wrong .
I un-rooted the phone and upgraded it to Jellybean 4.2.2
Not an update a custom rom .
Millions of posts on here how to go back TUTS stickys how to films books even a play .
Did you bother looking reading the faqs and guides ???
http://forum.xda-developers.com/showthread.php?t=1978840
jje
Click to expand...
Click to collapse
no
my original post is right
my phone firmware was 4.1.2 ( original ) and rooted
and i did un-roote and changed to jellybam 7.5.0
now i need to go back to the original
and i asked about Samsung_Galaxy_S3_ToolKit_v7.0 >> does it help in my situation
Click to expand...
Click to collapse
Find your stock Rom and flash with Odin
slaphead20 said:
Find your stock Rom and flash with Odin
Click to expand...
Click to collapse
please
understand my problem
i told you before that the mobile can't connect to either kies or odin ?
Mishoo66 said:
please
understand my problem
i told you before that the mobile can't connect to either kies or odin ?
Click to expand...
Click to collapse
There is no other way than odin or mobil odin , if you are on a custom rom it maybe rooted already so try installing mobile odin and flash with it.
Link for mobile odin : http://forum.xda-developers.com/showthread.php?t=1347899
EDIT : I forgot to add try uninstalling Kies and samsung USB drivers then install this drivers.rar it should work .
Fygaroo said:
There is no other way than odin or mobil odin , if you are on a custom rom it maybe rooted already so try installing mobile odin and flash with it.
Link for mobile odin : http://forum.xda-developers.com/showthread.php?t=1347899
Click to expand...
Click to collapse
how to know if it is rooted or not ?
if it is un rooted i cold not flash jellybam 7.5.0
EDIT : I forgot to add try uninstalling Kies and samsung USB drivers then install this drivers.rar it should work .[/QUOTE]
i'll try your driver
thanks
Fygaroo said:
There is no other way than odin or mobil odin , if you are on a custom rom it maybe rooted already so try installing mobile odin and flash with it.
Link for mobile odin : http://forum.xda-developers.com/showthread.php?t=1347899
EDIT : I forgot to add try uninstalling Kies and samsung USB drivers then install this drivers.rar it should work .
Click to expand...
Click to collapse
Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you
finally it works with your magic driver ODIN CONNECT !!!!!
One more question
i noticed that custom roms consume battary much more than original firmware !!
Am i wrong ?!!
Mishoo66 said:
One more question
i noticed that custom roms consume battary much more than original firmware !!
Am i wrong ?!!
Click to expand...
Click to collapse
I usually find stock roms use more battery as custom roms sometimes have a lot of bloatware removed which would run in the background and consume ram, cpu time and could wake the device from deep sleep.
Ps: Fygaroo post that helped you would look even better by pressing thanks on it.
Sent from my GT-I9300 using xda premium