10.1n dead after charging - Galaxy Tab 10.1 Q&A, Help & Troubleshooting

Hi Users
i am from germany (sorry for my english).
i have a problem, the tab normaly works until 12-10-04 in the evening, later i connect to ac adapter, next morning the screen was black, noting works.
I flashed cm9 (http://forum.xda-developers.com/show....php?t=1670964) last week, all functions are normal for the last week.
Now the tab ist dead.
I tested the following
- hold power button for 2 minutes, noting on display
- connect to ac adapter, noting on display, no icon for loading the battery
- hold power button an vol down key, noting on display
But the led flash light on the back side makes a short flash every 15-20 sec
Help needed
Thanks for answers

I've been following the forums and I've never seen such an issue.
Try putting the tab in nvflash mode. Then try booting.
There is a thread in the general section.
Sent from my GT-S5360 using Tapatalk 2

kishorsidu said:
Try putting the tab in nvflash mode. Then try booting.
Click to expand...
Click to collapse
there ist no way to boot anything, power button ist not working

WolffRainer said:
there ist no way to boot anything, power button ist not working
Click to expand...
Click to collapse
Try recharging your unit. It might take a couple of tries. If that does not work, it could be your battery, mainboard or power button.

Problem solved
I disassemled the Cover (youtube vidoe will help) discennect and connect the battery, Tab will start and work normaly. Next Step, new ROM
Thanks a lot
Rainer

Related

[Q] Is there any real fix for sleep of death?

Dear all,
I have my new tab (64Gb/3G/wifi) for one week and I cannot power on since few days.
I'm sure that the battery is full because it was in charge all the night.
I tried many things (holding power button during 5, 10, 30, 120 seconds, holding power and volume left button) but each attempt failed.
I just know that when I connect it to the laptop, Windows sounds as it is recognizing an USB device but 2 seconds later sounds as the device was removed....
Is there any way to fix the problem? Have I to send the tab to the samsung support?
Thanks for your help... :-(
pierricktpt said:
Dear all,
I have my new tab (64Gb/3G/wifi) for one week and I cannot power on since few days.
I'm sure that the battery is full because it was in charge all the night.
I tried many things (holding power button during 5, 10, 30, 120 seconds, holding power and volume left button) but each attempt failed.
I just know that when I connect it to the laptop, Windows sounds as it is recognizing an USB device but 2 seconds later sounds as the device was removed....
Is there any way to fix the problem? Have I to send the tab to the samsung support?
Thanks for your help... :-(
Click to expand...
Click to collapse
Mine does it occasionally. I hold the power button down for a long time and let go - repeating as necessary until it revives itself.
BarryH_GEG said:
Mine does it occasionally. I hold the power button down for a long time and let go - repeating as necessary until it revives itself.
Click to expand...
Click to collapse
Mine doesn't revive with that....
That's why I need to know if there is a real fix for this issue...
Try holding power and volume down button at the same time dor aprox. 15 seconds. Then you should see the "download" logo. Then press volume down to switch to CVM - acknowledge with volume up. Then in CVM just choose reboot.
Hope it helps you
Stenager129 said:
Try holding power and volume down button at the same time dor aprox. 15 seconds. Then you should see the "download" logo. Then press volume down to switch to CVM - acknowledge with volume up. Then in CVM just choose reboot.
Hope it helps you
Click to expand...
Click to collapse
Already tried without any reaction of the tab...
pierricktpt said:
Already tried without any reaction of the tab...
Click to expand...
Click to collapse
I'm leaning toward faulty.
This one looks to have worked for mine - Tab locked up and died on Sunday, and *fingers crossed* looks to have just come back to life (within the last 10 mins so am not 100% sure).
Leave the battery to discharge completely. Then charge it up. That's it.
With the lack of screen output, the only way i could see to tell if the battery is dead is to plug it into a PC via the USB cable. If you get ADX mode then it's not discharged. Leave it a bit and try again. When you plug it in, if it doesn't show ADX mode make sure you press and hold the power button for a few seconds to make sure it isn't just turned off.
**Edit**
Looking good so far. Am leaving it to charge for a bit before i turn it on but i can at least now press the power button briefly to get the battery indicator
**Edit 2**
Having left it to charge for a couple of hours i then took the plunge. Booted up no problem so it looks like this has worked for me.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
?
I have this same issue. Mine was fine went to bed woke up and it was dead no life at all. I have done all button combos different cords and factory chargers nothing. I even swapped the battery for a new factory samsung battery inside nothing. i dont get anything when I plug it into my computers though no found sound or anything. I left the battery unhooked for an hour before connecting it to the board inside also. I now have the power button taped pressed for last 2 hours hopeing that will drain the battery like other have done and then I will try to hook it back up to a charger. Any other ideas why it was fine then next day dead?
Yes exist a fix back to 4.0.4 stock recovery and all bugs gone for me that works
Στάλθηκε από το GT-P7510 μου χρησιμοποιώντας Tapatalk

Any advice would be apreciated

Need some advice please
Any Flyer member who can advice me please?
Buyed a WIFI Flyer 16Gb Gingerbread stock no rooted turned on and suddenly turned off and got stuck in black screen (with some light in the back) vol down + power, nothing.
battery has 100% charge, but red led turned on and off ocasionally.
Any advice how to revive it would be greatly apreciated!
Thanks in advance,
Soft reset - Hold down power button only. Keep holding until tablet resets. You should know when this happens. You can't bring it up in bootloader/recovery (down vol. + power), until it's first actually turned off.
Does your PC recognize a device being plugged in when you connect
Sent from my HTC Flyer P510e using xda premium
.
Thanks for your replies:
It didnt work pressing only vol dow for a while, or presing only power button, it never rests.
Just behind power button a green mini led is turned on now all the time, probs started when removed back to insert sd card.
Tooked off to make some tests but now still nothing...
If connecting to PC nothing happens...not detected...no asking for install drivers
Any other advice?
Thanks in advance!
orb3000 said:
Thanks for your replies:
It didnt work pressing only vol dow for a while, or presing only power button, it never rests... probs started when removed back to insert sd card.
If connecting to PC nothing happens...not detected...no asking for install drivers
Any other advice?
Thanks in advance!
Click to expand...
Click to collapse
Take off back cover... Remove SD card... Try to reset again, power btn only, hold down 20 to 30 secs., don't use volume btn.
Nothing happens
i would suggest trying to globatron's attention. if anyone on this board would know what to do it would likely be him
orb3000 said:
Nothing happens
Click to expand...
Click to collapse
I would agree with mcord11758... Still...
orb3000 said:
battery has 100% charge, but red led turned on and off occasionally.
Click to expand...
Click to collapse
A red led isn't going to show with a 100% power condition. Later you wrote...
orb3000 said:
It didn't work pressing only vol down for a while, or pressing only power button, it never rests. Just behind power button a green mini led is turned on now all the time...
Click to expand...
Click to collapse
(doesn't make sense to me) A green led can't show unless the tablet is plugged into a power source and the battery actually is 100%...
If yours is a stock unit with a stock rom (and isn't defective), I would suspect a low battery condition that can't reset/reboot for lack of power...
Suggest you plug it into the wall and try the reset procedure again, and if still a failure, (maybe you can get some help from globatron or) call HTC.
...and then again, as I've read in other threads (that you've also seen), maybe all that's needed is a battery disconnect & reconnect. - Hope you get those pics, and if so... make it a last course of action, as you'll have no warranty if you do it.
Thanks.
Update:
I left computer connected to Flyer all night, and the day after it was turned off, then unplugged from PC and plugged it again, PC recognized the tablet and after that I ran the stock RUU, now it´s stuck on the process as it has been more than 20 minutes and progress bar in computer is at 100% with the following legend:
sending..........
updating the Rom image on your android phone
It is stuck there, how much should I wait? or if you recommend to do something else?
Thanks in advance for all your help.
UPDATE: RUU failed, says I have the wrong image, finished, exited and rebooted normally!
Now working, but I´m afraid to open the cover to insert my sd as the last time it was when it was turned off
Orb,
That sounds like it when into DL mode. On the flyer once you get out of DL mode it's normally fine after that. It seems to be random, mine did it once or twice, leedroid has seen it as have a few others.
After it boots again it goes back to normal.
Hi mate,
Thanks for your reply.
Very strange behavior. After all above mentioned I was able to use is perfect, even updated to OTA Honeycomb all went ok, installed some apps, etc.
Then decided it was time to test again to remove the cover and install my sd card, just in the minute I touched the back , not even finished of removing, and Flyer went screen off, now again I can´t turn it on. Could be a short circuit or something?
I will leave it connected to wall charger for the night and hopefully tomorrw will be able to turn it on again....
I swear never again to remove the back cover
PS: I checked battery level before all this and it was in 77%, now red led on power button is on...
globatron said:
Orb,
That sounds like it when into DL mode. On the flyer once you get out of DL mode it's normally fine after that. It seems to be random, mine did it once or twice, leedroid has seen it as have a few others.
After it boots again it goes back to normal.
Click to expand...
Click to collapse
orb3000 said:
Hi mate,
Thanks for your reply.
Very strange behavior. After all above mentioned I was able to use is perfect, even updated to OTA Honeycomb all went ok, installed some apps, etc.
Then decided it was time to test again to remove the cover and install my sd card, just in the minute I touched the back , not even finished of removing, and Flyer went screen off, now again I can´t turn it on. Could be a short circuit or something?
I will leave it connected to wall charger for the night and hopefully tomorrw will be able to turn it on again....
I swear never again to remove the back cover
PS: I checked battery level before all this and it was in 77%, now red led on power button is on...
Click to expand...
Click to collapse
That's weird, if it's not too much could you try and get a logcat (adb logcat) when its screen goes off while opening the cover. That should help us establish whether this is a HW problem(unique perhaps bad mainboard) or software problem (me,globatron,Lee, etc. experienced)
I can also confirm that it happened to me too couple of months back, but after soft reset it rebooted fine, but the backcover issue is new.
Sent from my HTC Flyer P510e using XDA Premium HD app
hello
Im orbs friend, my htc flyer still having the prob, everytime i touch the cover or pusih it by accident it goes back.
What I do is leaving it charging for awhile and press power button and vol down at the same time for around 30 sec for a couple of times and then it re start. Im guessing its not a software problem i dont find an explanation i even updated it to 2.3.4.

sony xperia tablet 2 maybe bricked

hi,
i'm new in the forum.
i have an issue:
my tablet doesn't turn on.
i've try to turn it on with the recovery mod (power button and volume up) but nothing...
i put it on charge for something like 4 hours but nothing, no led blinking, no vibration.
what can i try now ? (after pray i mean)
thank you guys
onetwoitsthewu said:
hi,
i'm new in the forum.
i have an issue:
my tablet doesn't turn on.
i've try to turn it on with the recovery mod (power button and volume up) but nothing...
i put it on charge for something like 4 hours but nothing, no led blinking, no vibration.
what can i try now ? (after pray i mean)
thank you guys
Click to expand...
Click to collapse
I had a similar issue 2 times with months in between , no response from power+vol up , no lights when charging , no response from pressing on the red button behind the flaps, last time it happened after a reboot from an update and still having plenty of battery left.
I tried putting it on the charger for a whole day with no result , put it back in the box to return it , decided to let it rest a few days first , since someone had the same issue and it magically came back to life when he got back from a vacation.
So i try to turn it on 2 days later and it worked again magically indeed, functions totally restored till this day.
Hope this helps a bit
icyrev said:
I had a similar issue 2 times with months in between , no response from power+vol up , no lights when charging , no response from pressing on the red button behind the flaps, last time it happened after a reboot from an update and still having plenty of battery left.
I tried putting it on the charger for a whole day with no result , put it back in the box to return it , decided to let it rest a few days first , oksince someone had the same issue and it magically came back to life when he got back from a vacation.
So i try to turn it on 2 days later and it worked again magically indeed, functions totally restored till this day.
Hope this helps a bit
Click to expand...
Click to collapse
I'm seriously thinking to assistance...
Thank you.
Byt
onetwoitsthewu said:
I'm seriously thinking to assistance...
Thank you.
Byt
Click to expand...
Click to collapse
If it's like the Z1 Tablet you could try a complete power down by pressing the volume up/down, and power button for several seconds, then try to do a recovery via the Sony PC companion (so long as you can get into flash mode), if it works you'll loose all data, but it's worth it IMO
icyrev said:
I had a similar issue 2 times with months in between , no response from power+vol up , no lights when charging , no response from pressing on the red button behind the flaps, last time it happened after a reboot from an update and still having plenty of battery left.
I tried putting it on the charger for a whole day with no result , put it back in the box to return it , decided to let it rest a few days first , since someone had the same issue and it magically came back to life when he got back from a vacation.
So i try to turn it on 2 days later and it worked again magically indeed, functions totally restored till this day.
Hope this helps a bit
Click to expand...
Click to collapse
I've got something like this going on too. Plugging it into a blackberry playbook charger seemed to give it a charge when the OEM charger wouldn't work. It came back to life. I've also noticed that the tablet won't sleep properly while charging. I plug it in, hit the power button to sleep, and it wakes it self as though I plugged a charger in. And so I cycles dimming the screen to sleep and then seconds later like u tap the power button to get the screen to wake. Something s definitely wrong.
onetwoitsthewu said:
hi,
i'm new in the forum.
i have an issue:
my tablet doesn't turn on.
i've try to turn it on with the recovery mod (power button and volume up) but nothing...
i put it on charge for something like 4 hours but nothing, no led blinking, no vibration.
what can i try now ? (after pray i mean)
thank you guys
Click to expand...
Click to collapse
I'd the same on my SGP511 yesterday when rooting failed. Just charge for an hour using Sony charger, then press POWER + VOLUME for more than 60 seconds. It vibrates three times and resume from death. Cheers!
It seems like some of these boards may be failing. I think this issue is related to the screen not powering off while charging issue. Users are reporting that Sony is repairing the devices by replacing their main boards. I wonder if there is a known issue with z2 tabs that Sony is aware of.
My z2 tab has both of these problems. I flashed a factory ftf to it and it still had the problem. This is what led me to believe that it was hardware related as it didn't used to do it running cm11 or stock firmware.
I had this happen to me once or twice, though in my case I could recover via power + up/down (can't remember lol) .
In the end my tablet developed other symptoms (namely inability to magnetic charge, and screen stays always on when charged) so i sent it off for repair and they replaced the motherboard.
Hasn't happened since, though I only have had it back for a few weeks. Touch wood.
wintermute000 said:
I had this happen to me once or twice, though in my case I could recover via power + up/down (can't remember lol) .
In the end my tablet developed other symptoms (namely inability to magnetic charge, and screen stays always on when charged) so i sent it off for repair and they replaced the motherboard.
Hasn't happened since, though I only have had it back for a few weeks. Touch wood.
Click to expand...
Click to collapse
Does replacing the motherboard mean fully stock and locked boot loader with present DRM keys?
Fatal1ty_93_RUS said:
Does replacing the motherboard mean fully stock and locked boot loader with present DRM keys?
Click to expand...
Click to collapse
Yep as in these tablets the flash/CPU/RAM etc. is baked into the mobo so its more or less getting a new tablet internally.
to my shame I updated it without remembering you can only root the older firmware which it did come with ROFL.... oh well the only thing I use root for is adblock
I've just posted my version of events regarding this:
http://forum.xda-developers.com/xpe.../strange-experiance-xperia-z2-tablet-t3044275
wintermute000 said:
Yep as in these tablets the flash/CPU/RAM etc. is baked into the mobo so its more or less getting a new tablet internally.
to my shame I updated it without remembering you can only root the older firmware which it did come with ROFL.... oh well the only thing I use root for is adblock
Click to expand...
Click to collapse
Can't you just use flashtools to downgrade your tablet back to the rootable 4.4.2 firmware?
I managed to downgrade my xperia z2 4g tablet with flashtools application.
Only hiccup was that i accidentally put my tablet in bootloop while i tried to downgrade it, after that i just rooted and installed dual recovery. With that dual recovery i could flash pre rooted 4.4.4 and so i still have my drm keys and ps4 remote play app.

Phone won't Power up need help

Bought Elephone P9000 for her indoors, when she switched the phone on initially there was a test screen which baffled her so she switched the phone of and left it for me. Now the phone will show that it is charging and the battery image will show on the screen. However the phone will not power on. I have tried the power button and starting via the Hard Reset buttons and nothing is appearing on the screen. Any suggestions as to how to rectify this problem?
Hi.
Is it possible to boot recovery? Hold vol+ and power.
Greetings
Vsrookie
Sent from my P9000 using XDA-Developers mobile app
no it wont do that
BigBadBaz86 said:
no it wont do that
Click to expand...
Click to collapse
Try flashing a stock ROM using SP Dlash Tools.
Stupid question, but have you disconnected from power before trying to turn on? It seems to show battery every time I try to turn on with power connected but turns on fine with a 3 second hold of the power button once charger is disconnected.
My phone won't power up, too. It is just showing the elephone logo. Is this the case for you, too?
I.have the same issue. Vol and.Power.buttons do not.do thing. if the charger is plugged in, a green egg timer appears.for a few.seconds, but the phone does not power up/ switch on.
Any ideas anyone?
soloution
Thanks guys!!! :good:http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042 following the thread on here a going through in instructions step by step was a great help and help me sort out tis problem for anyone still having issues. phone works great now she loves it
Does anyone knows if the connector on power button is cut off (the flex cable for power and volumes buttons), the phone will not charge anymore?
The phone stop charging or power on, I opened the back cover carrefully and observe that this flex cable is broken.
Got my new Elephone S7 today. Had some charge in the battery from factory but that went fast and now dead.
Will not charge. Have tried all the obvious fixes ( cleaned port, diff charger, diff outlet).
Cant reboot cause it is dead. Any help please!!!
1725Libertyroad said:
Got my new Elephone S7 today. Had some charge in the battery from factory but that went fast and now dead.
Will not charge. Have tried all the obvious fixes ( cleaned port, diff charger, diff outlet).
Cant reboot cause it is dead. Any help please!!!
Click to expand...
Click to collapse
this forum is for elephone p9000 not s7.. post questions in elephone forum website or the right xda device thread(if theres one..)
Connect it with a PC through a branded USB Cable and then press power or POwer+Vol button it will show you some messages on screen.
My Elephone S7 shows boot Mode and the cursor keep on scrolling from Top to Bottom.
I think you may have some problem like the same.

Moto E: nothing shown on screen, white LED is blinking long short

I reflashed to stock rom. After that (succesful boot), it suggest to update to a newer Firmware. I agreed. Then it doesn't awake anymore.
Even long press to power there is no sign of life.
If I plug the power, the white LED goes on for a certain time. I guess it is until it is fully charged.
After this it starts blinking: long, short, long, short .. a few times, than it stops
After pressing the keys, blinking starts again - with no stop until unplugging USB.
Is there any hope to recover it. This time I have not much hope ....
In my moto E, when I connect to charger, the white light blinks for 1 sec, then goes off. No long press, anything is working
starbright_ said:
I reflashed to stock rom. After that (succesful boot), it suggest to update to a newer Firmware. I agreed. Then it doesn't awake anymore.
Even long press to power there is no sign of life.
If I plug the power, the white LED goes on for a certain time. I guess it is until it is fully charged.
After this it starts blinking: long, short, long, short .. a few times, than it stops
After pressing the keys, blinking starts again - with no stop until unplugging USB.
Is there any hope to recover it. This time I have not much hope ....
Click to expand...
Click to collapse
1. Press and hold power button and connect the charger
If white screen appears then go for next step
2. Unplug the charger once and again connect your charger without pressing any button
3. Let your mobile get charged
4. Then flash stock/custom ROM (search in XDA thread)
NOTE : Don't use stock charger(default charger comes with your mobile kit)
USE DIFFERENT CHARGER
Hope it helps you:good:
Rajendran Rasa said:
1. Press and hold power button and connect the charger
If white screen appears then go for next step
2. Unplug the charger once and again connect your charger without pressing any button
3. Let your mobile get charged
4. Then flash stock/custom ROM (search in XDA thread)
NOTE : Don't use stock charger(default charger comes with your mobile kit)
USE DIFFERENT CHARGER
Hope it helps you:good:
Click to expand...
Click to collapse
Used a Samsung Charger, pressed power and plugged in. Nothing happened first. After a while (i guess I released the button) the white LED starts blinking again. And it still blinks.
I haven't seen anything on screen since this update happened ...
Seems to be really screwed.
starbright_ said:
Used a Samsung Charger, pressed power and plugged in. Nothing happened first. After a while (i guess I released the button) the white LED starts blinking again. And it still blinks.
I haven't seen anything on screen since this update happened ...
Seems to be really screwed.
Click to expand...
Click to collapse
Can you go to fastboot mode??
Rajendran Rasa said:
Can you go to fastboot mode??
Click to expand...
Click to collapse
No, Power + Volume down (also tried Volume up) - nothing helped.
The only sign of life is the white LED that seems to indicate charging (if it is on/not blinking).
The second is this strange blinking, I can start with Power + Volume down (but only if USB cable is plugged).
But a "adb usb" reports "no device/emulators found"
starbright_ said:
No, Power + Volume down (also tried Volume up) - nothing helped.
Click to expand...
Click to collapse
Then try this
Connect charger and hold power + volume down
The whit led flashing happens when the battery is deep discharged....Put it on charge for at least 20 minutes ...Then try turning it on ,or going into fastboot mode by disconnecting the charger first
Akshay_92 said:
The whit led flashing happens when the battery is deep discharged....Put it on charge for at least 20 minutes ...Then try turning it on ,or going into fastboot mode by disconnecting the charger first
Click to expand...
Click to collapse
From my experience the White LED goes on (not flashing) if it charges.
It goes off after fully charged. I keep it on charger for many hours.
The LED flashing only happens If I try to go into fastboot while USB is plugged.
starbright_ said:
From my experience the White LED goes on (not flashing) if it charges.
It goes off after fully charged. I keep it on charger for many hours.
The LED flashing only happens If I try to go into fastboot while USB is plugged.
Click to expand...
Click to collapse
You should try to go into fastboot when the phone is fully charged ,rather than when it is being charged ,I have seen it that behaves weirdly when trying to enter into fastboot with the charger being plugged in .
Sent from my Moto G (4) using Tapatalk
Mh, from what I see - if there is no USB plugged, it happens nothing at all. I can preess Power or Power+Volume up/down as long as I like ...
starbright_ said:
Mh, from what I see - if there is no USB plugged, it happens nothing at all. I can preess Power or Power+Volume up/down as long as I like ...
Click to expand...
Click to collapse
A question, which stock ROM version did u flash 4.4.4 or 4.4.2 ?
I was on Lineage, flashed back to stock. Probably to 4.4.2. Than it wants to update to newer stock release, guess 4.4.4 but not sure. Do you think this matters?
starbright_ said:
I was on Lineage, flashed back to stock. Probably to 4.4.2. Than it wants to update to newer stock release, guess 4.4.4 but not sure. Do you think this matters?
Click to expand...
Click to collapse
Yes it matters.
https://forum.xda-developers.com/moto-e/general/warning-downgrading-information-moto-e-t3062859
_sushan_ said:
Yes it matters.
https://forum.xda-developers.com/moto-e/general/warning-downgrading-information-moto-e-t3062859
Click to expand...
Click to collapse
There is nothing mentioned about a solution. I do have a brick :crying:
starbright_ said:
There is nothing mentioned about a solution. I do have a brick :crying:
Click to expand...
Click to collapse
See other threads, u did a mistake by flashing 4.4.2 . You should have flashed 4.4.4 instead. Accepting the OTA, you have hard-bricked your device. It can't be restored as of now. Buy a new device
starbright_ said:
I was on Lineage, flashed back to stock. Probably to 4.4.2. Than it wants to update to newer stock release, guess 4.4.4 but not sure. Do you think this matters?
Click to expand...
Click to collapse
Do you have the v4.4.2 ROM as I just want to check if otg is working or not. As only words are flying around I just need to confirm it.
Ankit_29 said:
Do you have the v4.4.2 ROM as I just want to check if otg is working or not. As only words are flying around I just need to confirm it.
Click to expand...
Click to collapse
As mine one is a brick I deleted all the tested roms and stuff. Sorry.
But as far as I remember OTG doesn't work on Moto E.
starbright_ said:
As mine one is a brick I deleted all the tested roms and stuff. Sorry.
But as far as I remember OTG doesn't work on Moto E.
Click to expand...
Click to collapse
Will verify, no OTG support on stock.
xt830c variant but i doubt that will make any difference lol.
Your device is hard bricked now same as mine. I did the same thing 1 year ago.
I haven't found any solutions yet.
https://forum.xda-developers.com/moto-e/help/solution-hard-bricked-moto-e-t3586395
Let's wait if these guys find some solution.
Btw if anyone have a working Moto E please update the image file on drive and share the link over there.
That will a great help.
Thanks!!

Categories

Resources