I have had a Bad ESN Fascinate for a while that I was playing around with, trying to get it to work on Sprint... No go. Anyway, it was rooted with a stock GB ROM and I decided I wanted to try out some of the ICS or Jellybean offerings that XDA has in its forums.
To be honest, I am no noob, but I didn't do enough research to begin with. First I installed GeeWiz 2.9 Kernel, System, and 2.8 Recovery. I didn't like the 2.8 Recovery, so I tried to flash something else, but nothing would replace it. Then I tried to install Baked CM10 from the GeeWiz recovery, and it went downhill from there.
Long story short, I have ODIN'd back to stock EH03 and tried to update to a couple of CM10 ROMs using the guides I have found here and on a few other forums. I have a working install of Hacksungs CM9 build 5 as of right now, but I can't get any further.
After using ODIN to get to Stock EH03, I ODIN the CWM4 for CM7. 3-fingering brings me to CWM4 where I begin the install of CM9. When it examines the partition BML/MTD it reboots the recovery (took me a while to figure that out) in to CWM 5.5.0.4 where it finishes the CM9 install. When I soft reboot into recovery, I get CWM 5.5.0.4. According to the guides, this is where I would flash CM10. It runs the update, but when I go to reboot the system, it reboots into a recovery of CWM 6.0.1.4. Also, if I reboot the system from CWM5 without installing anything, it boots back into CM9 just fine.
I am pretty sure I installed CWM 6.0.1.4 sometime in the past, but to be honest I have no recollection of when.
My question is multi-part: How do I get rid of CWM6; why is it still there after all the repartitioning with ODIN (with and without PIT file), MTD partition formatting, etc; why can't I get CM10 to install?
While this is a fairly wordy post, I have to say, I do have a working Fascinate with CM9 that I am enjoying playing with. I just thought if nothing else, people might get a laugh out of my struggles with this phone, that is basically a web browser and toy.
FWIW I have seriously ODIN'd back to stock about 5 or 6 times today alone.
Thanks for any help or suggestions in advance.
Unlike Gingerbread and earlier, with ICS and JB kernels they include whatever version of recovery the developer wants to include.
Is there a reason you don't want the latest CWM?
Sent from my SCH-I500 using xda app-developers app
Its been awhile for me since I had to go back to stock, but unless something has changed the three finger reboot into cwm caused some problems when flashing. Try rebooting to recovery through power menu.
Some ROMs are requiring to be installed a second time to "stick" due to partition layout changes.
Sent from my SCH-I500 using xda app-developers app
Thanks for the info on the ICS and JB attached recoveries. I was unaware of that. Maybe that's where the CWM6 came from.
And it isn't that I don't want to most current, it just didn't seem to want to play nice with the ICS and JB Roms I was trying to installed.
Now my problem is that the phone won't boot when powered down from ICS. Glad this isn't my main phone.
Sent from my EVO using xda app-developers app
That's what I had read everywhere... NEVER 3-Finger into Recovery from ICS or JB. I still managed to do it a few l times when I wasn't thinking.
It definitely screws up the install. I can attest to that.
I just don't get why there are all three CWM versions present during the install, and if I am installing CWM4 fixed for CM7, and one of the other two is included with the ICS Rom, where did the 3rd one come from? Just a big, confusing mess
Sent from my EVO using xda app-developers app
From my limited knowledge,,,
I know the fixed cwm is what you need to get out of a 3 finger boot loop,,, I've had to do that...
Cwm 6 is what runs and works with cm10/jb roms,,,
Causes no errors that I'm aware of...
No more 3 finger,, always use power button/reboot
Once you have started an install of say cm10 ... Let it run its course , so to speak,,, if it comes up with cwm5 or cwm6 then that is the one the developer designed it to work with,,,
Let it come all the way up,, and then reboot through the power button method always,,,, you'll get used to that quick enough , as i remember the old gb froyo stuff didn't offer this method
I keep a copy of the fixed cwm just in case i happen to accidentally 3 finger ever again...
Sent from my swagger
spikeekips said:
That's what I had read everywhere... NEVER 3-Finger into Recovery from ICS or JB. I still managed to do it a few l times when I wasn't thinking.
It definitely screws up the install. I can attest to that.
I just don't get why there are all three CWM versions present during the install, and if I am installing CWM4 fixed for CM7, and one of the other two is included with the ICS Rom, where did the 3rd one come from? Just a big, confusing mess
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Not sure if you are still looking for advice but here is a little guide that has not failed me at all. If you follow this then you should come to the latest JB rom that you want.
Click here
Related
getting to be far too familiar a scenario lately....
lately EVERY time i reboot my phone (running ics build 2, 3 and 4, stock kernel) it gets stuck on samsung logo.. somehow my phone will only boot into the frigging cm7 recovery which as im sure youre all aware is rather useless to fix any problems im having in ics and leaves me unable to flash, backup, or restore anything. it's quite frustrating and i have no idea how to fix it but by going back to bml, re-partitioning, then odin ei20 modem, cm7 fixed recovery, then flash back to ics but doin this every reboot it getting very tedious..
ive read about recovery loops, but the fix doesnt work for me as i cant mount the ICS /system partition in cm7 recovery...and ive been all over trying a zillion things to get it to work and havent pulled dmesg or logcat but if someone thinks it would be useful ..i wish i knew why EVERYTHING is great, then BANG, reboot and it's FML city.
i should add this phone is a replacement via insurance and that the entire time ive had it, i've been having this problem to varying degrees of intensity,.sometimes if i rebooted enough the ics boot animation would finally come up and freeze part way through, and in the first week with this phone is seemed fine. the first few times i rebooted and battery pulled until it started but this is the fourth time in two weeks ive found myself going back to repartition from odin and then back to ics.. the phone is only mine for a month,.
if nobody has any ideas ill be getting it replaced tomorrow in store. i have the no fee insurance replacement plan, but i would prefer not to have to use another as it's not under warranty and this would be my second replacement and this mes has to last me until the gnex hits uscc in hopefully april if it ever does because i'd rather switch to vzw than take any of usccs other offerings currently.. if they dont get the gnex it'll be time for me to move on...
anyway please advise.. thanks
http://exzacklyright.blogspot.com/2012/01/how-to-flash-ics-on-verizon-samsung.html
exzacklyright said:
http://exzacklyright.blogspot.com/2012/01/how-to-flash-ics-on-verizon-samsung.html
Click to expand...
Click to collapse
Thanks for the response. Sounds like a good guide for newbs but in my case information is redundant. I have no problems with the install, unless recovery switches to cm7 recovery during reboot and cannot manage to boot/flash/nandroid until I Odin stock ei20 with repartition and wipe out every bit of data I had. The posts about howto fix CWM bootloop for cm9 do not seem to work for me, as the post says.. Please reread the OP, ya got me excited thinking there was a solution ;-/ thanks anyway, maybe it will help another user.
wizayne said:
Thanks for the response. Sounds like a good guide for newbs but in my case information is redundant. I have no problems with the install, unless recovery switches to cm7 recovery during reboot and cannot manage to boot/flash/nandroid until I Odin stock ei20 with repartitions and wipe out every bit of data in had. The posts about howto fix cwm bootloop for cm9 do not seem to work for me, as the post says.. Please reread the OPEN, ya got me excited thinking there was a solution ;-/ thanks anyway, maybe it will help another user.
Click to expand...
Click to collapse
have you tried flashing glitch kernel to the phone. imo it sounds like a kernel issue and not so much a phone issue.
mkuehl06 said:
have you tried flashing glitch kernel to the phone. imo it sounds like a kernel issue and not so much a phone issue.
Click to expand...
Click to collapse
The problem started after using ics from alphalulz v1 on around build 3 team hacksung IMMEDIATELY AFTER flashing glitch kernel v14 build 4...I have since kept away from glitch on ics, and the problem remains.
Lately it hasn't been as bad though and it seems by hitting random buttons during boot that it will eventually start but reading tells me glitch v14 build 5 is still recovery bootloop ridden and I haven't seen a word about it in the OP for ANY ics components be it team hacksung roms or glitch kernel, and an issue like this which from reading is seemingly widespread *should* be mentioned.
Any suggestions?
In your op you said e120, what phone are you using. E120 isn't a fascinate build.
Sent from my SCH-I500 using XDA App
Ei20 is the latest and greatest version of gb/radio from uscc for the mesmerize, not that it'll change the outcome afaik to go to anything else... unfortunately ;-/
But it is a full flash package if ya open the tar up complete with movinand, sbl, radio, rfs, etc.. I think it is a 10 or 11 file package and I've used it a hundred times with making the switch from mtd to bml
wizayne said:
Ei20 is the latest and greatest version of gb/radio from uscc for the mesmerize, not that it'll change the outcome afaik to go to anything else... unfortunately ;-/
But it is a full flash package if ya open the tar up complete with movinand, sbl, radio, rfs, etc.. I think it is a 10 or 11 file package and I've used it a hundred times with making the switch from mtd to bml
Click to expand...
Click to collapse
That makes more sense to me now I know what phone your on. Try rootzwiki they have a mesmorize section, they can help ya out more than I can. I have fassy so idk much about mes
Sent from my SCH-I500 using XDA App
I have lurked for a while looking for a thread that closely matches the path I have taken. I arrived here partly by the sequence of threads and instructions I read and what has worked for me so far. I am somewhat versed in installing different ROMs as I did so on my Incredible.
I would like to get to ICS. It just looks cool. I bricked once last night trying. I used Odin to get back to stock GB. Then got to where I am.
Details:
1. Use Odin to get to stock GB. (EH03 and Atlas _v2.2 pit) Reboot to stock GB.
2. Use Odin to push CWM4 fixed for CM7
3. Three finger to CWM4 and load salsaCM7_fascinate_02132012.zip
4. Install Gapps zip from CWM4
5. Use phone
Currently when I boot recovery from the three finger method I get CWM4 but it will not mount /data, /system, /cache, etc. If the device is booted and I reboot to recovery with the power button I get CWM5 and all files mount correctly.
Can I just load an ICS ROM from CWM5?
Do I need to start with build 2 or can I use 6.1 from here?
Or do I need to go back to stock EH03, load a plain CM7 and move forward that way?
I think I may have found an answer in Droidstyle's guide in section 4. I would have to go back to stock though to get CWM4 to work, then install THS build 1.
Do I have to do this or can I reboot into CWM5 recovery from the SalsaMOD CM7 and install an ICS ROM? Would I have to use an earlier build like 1 or 2 or can I go straight to 6?
You can go straight to ICS from CM7, and you can certainly try jumping straight to the latest build, but I always have had to install build 1 or 2 first and then the later build. When I went from CM7 to ICS, I was on a different CM7 rom, but you should be able to go to ICS without having to go all the way back to stock.
Another thing to keep in mind is NEVER to 3-finger into recovery once you've flashed an ICS rom, you'll end up bootlooped. I'd get into the habit of always rebooting recovery from the power menu.
Chuckles at the fact someone flashed salsa...
Ooh and Goodluck flashing
Sent from my SCH-I500 using xda premium
k_nivesout said:
You can go straight to ICS from CM7, and you can certainly try jumping straight to the latest build, but I always have had to install build 1 or 2 first and then the later build. When I went from CM7 to ICS, I was on a different CM7 rom, but you should be able to go to ICS without having to go all the way back to stock.
Another thing to keep in mind is NEVER to 3-finger into recovery once you've flashed an ICS rom, you'll end up bootlooped. I'd get into the habit of always rebooting recovery from the power menu.
Click to expand...
Click to collapse
Many thanks. I have both builds on my SD card at the moment. I did make the mistake of booting recovery from the three finger method. That's why I had to Odin all the way back to stock. I won't be doing that again.
neh4pres said:
Chuckles at the fact someone flashed salsa...
Ooh and Goodluck flashing
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
Yeah yeah yeah... I saw that coming after reading several threads today.
It is actually working okay for me. I just like the look of the ICS ROMs. I think I am going to go with THS build 6.1 w/ Icy Glitch kernel like DroidStyle mentioned in another thread.
Also, I am going to try the 4G world and pick up a Charge this afternoon. Any thoughts on that device?
Oldtymehockey said:
Many thanks. I have both builds on my SD card at the moment. I did make the mistake of booting recovery from the three finger method. That's why I had to Odin all the way back to stock. I won't be doing that again.
Yeah yeah yeah... I saw that coming after reading several threads today.
It is actually working okay for me. I just like the look of the ICS ROMs. I think I am going to go with THS build 6.1 w/ Icy Glitch kernel like DroidStyle mentioned in another thread.
Also, I am going to try the 4G world and pick up a Charge this afternoon. Any thoughts on that device?
Click to expand...
Click to collapse
THS 6.1 and glitch v14 has been a great combo for me, I've never really had a more stable setup, even with overclocking. My uptime was around 120 hours before I finally got a freeze and a reboot but that probably wouldn't have even happened if I left the kernel settings default.
I can certainly see where 4g speeds would come in handy and look forward to upgrading to a 4g device when we get it in my area. I've gotta say though, the charge doesn't seem to be too popular among the modding community, I know there are a few roms around for it, but to my knowledge, they don't have working ICS. I was pretty happy with CM7/MIUI for a while and held off on switching full-time to ICS, but I can't really see myself going back now. Amazing performance and 4.0 is just a great upgrade for android in general, in addition to looking "cool". I've gotta think that going to a phone that's not as well supported rom/kernel wise, and without functional ICS would feel like sort of a downgrade, even with the charge's beautiful screen and LTE radio, but that's just me. Unless it's a screamin deal, I'd just hold out for a nexus.
Good move using Droidstyles guide ! FWIW....I have better luck with the THS 6.0 build.
Sent from my SCH-I500 using XDA App
The Fascinate is running ICS nicely thanks to DroidStyle. I did get the Charge. I did get it a hundo less than the going rate in my area. I need to go to 4G because I have been 'throttled' on 3G. It is a suxdonut but I am a data user so VZW punishes me.
I do need to get this Charge off stock but in the meantime at least I can bring up a web page in less than five minutes. My speeds were below 300k on 3G when I was 'throttled'.
I think my next step will be to learn some basic dev skills for these devices. I mean, if I can teach myself old school VBA I think I can fumble through some development. If I come up with something good, I will certainly share.
Just curious, how did you know that you were being throttled?
I got rid of CWM Recovery the other day...Got into a Soft Brick using it...Not sure how it happened ...But got out of it none the least using the 1a Method from here...Loaded up TWRP...I would just like to know if I can flash any Rom using it ...It recomends 4 compatible ones...So Im just wondering if I can flash CM 9 or Virtuous...Or am I lookin at a Brick again if I do so...
Im currently runnin Gummy's which I really like but Im a Flashaholic...at least with my S2...And I know Ill do the same with the Prime...So just checkin ...
BTW never had a problem with CWM on my S2...And I flashed a Ton of Roms...Specifically ICS...
ronny71 said:
I got rid of CWM Recovery the other day...Got into a Soft Brick using it...Not sure how it happened ...But got out of it none the least using the 1a Method from here...Loaded up TWRP...I would just like to know if I can flash any Rom using it ...It recomends 4 compatible ones...So Im just wondering if I can flash CM 9 or Virtuous...Or am I lookin at a Brick again if I do so...
Im currently runnin Gummy's which I really like but Im a Flashaholic...at least with my S2...And I know Ill do the same with the Prime...So just checkin ...
BTW never had a problem with CWM on my S2...And I flashed a Ton of Roms...Specifically ICS...
Click to expand...
Click to collapse
There's a custom CWM recovery a guy posted that's supposed to have that issue fixed. I haven't tested it to a different problem with writing to my partition that's just due to an issue my prime had from the previous owner borking something. Recoveries are different on every device. I used CWM exclusively on my Thunderbolt, then I got the rezound and CWM wasn't worth having when it first came out officially, I only run Amon RA on there.
I also had the 1a "brick" which really wasn't anything more than a recovery loop. I've been using TWRP and I'm a flashaholic, and with Gummy, EOS, a CM9 build and AOKP plus a bunch of misc zip files I haven't had any problems with it. If you want me to test something let me know, I'm not at all scared to wipe a device as setup doesn't take me long at all
CharliesTheMan said:
There's a custom CWM recovery a guy posted that's supposed to have that issue fixed. I haven't tested it to a different problem with writing to my partition that's just due to an issue my prime had from the previous owner borking something. Recoveries are different on every device. I used CWM exclusively on my Thunderbolt, then I got the rezound and CWM wasn't worth having when it first came out officially, I only run Amon RA on there.
I also had the 1a "brick" which really wasn't anything more than a recovery loop. I've been using TWRP and I'm a flashaholic, and with Gummy, EOS, a CM9 build and AOKP plus a bunch of misc zip files I haven't had any problems with it. If you want me to test something let me know, I'm not at all scared to wipe a device as setup doesn't take me long at all
Click to expand...
Click to collapse
With the Galaxy s2 that I have I run CWM all the time...On Gingerbread Builds ...never a problem...On strictly ICS builds...never a problem...The problem came from flipping back and forth from GB to ICS...I had 3 soft bricks but got out thru Odin...Now with the newer versions of ICS builds you have to flash a different kernel or Odin it inorder to use CWM...thats to play it safe because there are enuff Hard Bricks that shows a problem...(Sumthin to do with The Framework in the newre ICS Roms)...So Im just careful when I flash...Don't need a Hard Brick...Im gonna stay away from CWM over here...especially the Touch Versions which gave us the first initial problems when flashin with CWM on the XDA Galaxy Forum here...
So Ill be usin TWRP and if its safe to flash the Roms you mention I should be okay...But like you state...every device is different...Ill just try to be careful and keep readin on here and see where the Bricks are cummin from when they occur...Thanx alot for the response...I appreciate it...
hi,
I am sorry if this is a dumb question. But i have failed several attempts while shifting to ICS (RC 5 by team-nyx). Every time when i install ROM & kernel via CWM and boot the device (vibrant t959) it freezes on the screen with VIBRANT and SAMSUNG displaying WHITE on BLACK back ground.
i have gone back to JFD and tried several times BUT same result.
I was on froyo 2.2 (build UVKB5) updated via kies and did it but no luck. I followed wiki.cyanogenmod.com/wiki/Samsung_Vibrant:_Full_Update_Guide and did starting from No. 03 --
downloaded Cmenard's Kernel with the ClockworkMod Recovery 2.5
Heimdall Suite 1.3.2 for windows
AND upto No. 9 under Windows ONLY: section
the CWM installs as it says (A blue transfer bar will appear on the phone showing the kernel being transferred. The device will reboot automatically. )
after that i cleared factory, cache and dalvik cache.
then I select install Zip from SD card and chose the ROM (which is from team-nyx.com/index.php/releases).
after 3% it says rebooting and vibrant shuts down and reboots.. when after I clicked the combo (vol+vol-power) to enter the CWM its not there.. so I reinstall using [heimdall flash --kernel zImage] command in PC's cmd. then after i redid the same to select from SD and then ROM installed ok.
then I selected the kerenel which was taken by same source and installation went normal..
after I select reboot from CWM it reboots and hangs on vibrant screen.
I cannot figure OUT WHAT IM doing WRONG..
Please HELP ME..!!!
thank you for your time
I am moving to 2.2 via kies after going back to stock JFD. then i will root my vibrant. after that i will install ROM manager from market. THEN i will try to FLASH to ICS RC 5 + kernel from nyx TEAM.
I dont know what is wrong.. please HELP
From what you told us it sounds right. Have you tried a different ICS rom? Give ICS slim a try. When you Odin back did you checked re-partition?
Sent from my SGH-T959 using Tapatalk 2
You should try flashing the Gingerbread bootloaders using Odin after you flash back to stock. Those bootloaders can run a Froyo ROM as well as ICS so it wouldn't hurt to do either way. After you flash the bootloader then try flashing the ROM.
And try a different ROM like iwillkillyou suggested. Slim is good, but ICZen is very solid if you're tipping your toes into ICS.
iwillkillyou said:
From what you told us it sounds right. Have you tried a different ICS rom? Give ICS slim a try. When you Odin back did you checked re-partition?
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
hi,
thank you for the reply. No i havent tried a different ROM. yes I checked repartiton when ODin Y this is happening.. I have Flashed this ROM once.. but then when someone calls me they cudnt hear me clearly.. when i initiate the call its ok.. so I moved back to JFD..:/
kaiser_bun said:
You should try flashing the Gingerbread bootloaders using Odin after you flash back to stock. Those bootloaders can run a Froyo ROM as well as ICS so it wouldn't hurt to do either way. After you flash the bootloader then try flashing the ROM.
And try a different ROM like iwillkillyou suggested. Slim is good, but ICZen is very solid if you're tipping your toes into ICS.
Click to expand...
Click to collapse
thank you for the reply.. I jz finished Updating to 2.2 via kies..ok I will flash Gingerbread bootloaders using Odin. I will try I think it wont be necessary to ROOT the vibrant..to Flash Bootloaders.. I am going to Flash the ICS ROM via ROM manager (after rooting via SuperOneclick root2.3.3)..
haarsh said:
thank you for the reply.. I jz finished Updating to 2.2 via kies..ok I will flash Gingerbread bootloaders using Odin. I will try I think it wont be necessary to ROOT the vibrant..to Flash Bootloaders.. I am going to Flash the ICS ROM via ROM manager (after rooting via SuperOneclick root2.3.3)..
Click to expand...
Click to collapse
Just so that you know, everytime you are using Kies, you are running the risk of hardbricking your device. It is notorius for that and in fact someone last week got HBricked with it.
I don't use ROM Manager and probably won't as long as I have a Vibrant. All you need to do is go back to JFD and pull the CWR from my signature and put it on your internal_sd and label it as Update.zip. Then boot into recovery and hit Reinstall PAckages (might have to do this twice) and your stock recovery (blue) will go to CWR (green) and you can flash away.
Also for more detailed instructions, se my ICS install giude also in my signature.
Woodrube said:
Just so that you know, everytime you are using Kies, you are running the risk of hardbricking your device. It is notorius for that and in fact someone last week got HBricked with it.
I don't use ROM Manager and probably won't as long as I have a Vibrant. All you need to do is go back to JFD and pull the CWR from my signature and put it on your internal_sd and label it as Update.zip. Then boot into recovery and hit Reinstall PAckages (might have to do this twice) and your stock recovery (blue) will go to CWR (green) and you can flash away.
Also for more detailed instructions, se my ICS install giude also in my signature.
Click to expand...
Click to collapse
Thank you for the links.. I downloaded and place CWR inside SD. Without kies can we install official releases via Odin.. is there any way.. im sorry if that is a stupid question
No stupid questions. That is why we are here. I am pretty sure there is a flashable 2.2 stock floating aroung here. I personally don't have it though. Custom 2.2's are at this point tweaked so completely out, that they will blow the doors off any 2.2 stock ROM out there. I usggest Moped_Ryder's ROMs and Fishman's Bionix-redux ROMs. Quality, fast and stable. Not ICS, but everything works and no fear of the dreaded Encryption Bug.
PM incoming btw.
Woodrube said:
No stupid questions. That is why we are here. I am pretty sure there is a flashable 2.2 stock floating aroung here. I personally don't have it though. Custom 2.2's are at this point tweaked so completely out, that they will blow the doors off any 2.2 stock ROM out there. I usggest Moped_Ryder's ROMs and Fishman's Bionix-redux ROMs. Quality, fast and stable. Not ICS, but everything works and no fear of the dreaded Encryption Bug.
PM incoming btw.
Click to expand...
Click to collapse
thank you. btw can we Flash to 2.2 via CWM .. directly selecting the ROM from SD .. without Odin
If you can find it, you should be able to. Just put on your card and flash away, taking care to wipe accordingly.
A note on flow though:
2.1, 2.2 -can go into and out of any 2.2 there is laterally.
2.3-4.0 -will need to Odin to stock before going back to a 2.2 ROM. Can move laterally from 4.0 to 4.0 though.
(i.e DO NOT try to restore a 2.2 nandroid or flash a 2.2 ROM when you are on an ICS variant. the /system is completely changed and reformatted. You need to Odin to get it back.)
Moped Ryder uploaded a semi tweaked version of the stock 2.2 build. It's a zip that you can just flash using CWR:
http://forum.xda-developers.com/showthread.php?t=1674519
It comes rooted with busybox and some other goodies, but it's the stock kernel and whatnot. I'd highly recommend Fishman's Bionix-V Mod or Moped Ryder's Slim_Ryder ROMs if you're going to be on Froyo though. They're both great, but I went with Fishman's latest Bionix Mod since I couldn't get bluetooth to work on Moped Ryder's ROM. Which is really unfortunate because I loved Moped Ryder's otherwise.
And you don't have to Odin back to stock if you're just bouncing around Froyo or Eclair builds; only if you're coming from Gingerbread or ICS (2.3 or 4.0).
Keep us updated. I'm curious to see what worked. It's probably the gingerbread loaders. But, who knows.
Sent from my SGH-T959 using Tapatalk 2
Is your Samsung Vibrant (T959) Rooted.?
iwillkillyou said:
Keep us updated. I'm curious to see what worked. It's probably the gingerbread loaders. But, who knows.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
hi.. I tried again with flashing semaphore kernel through Odin installed CWM version higher than 2.5 to install ICS RC5 by nyx --sorry i need that soo badly so didnt checked anything else ..
@that time I was on vibrant 2.2 UVKB5 (stock)
NOT rooted
I didnt had so called
bootloaders
Click to expand...
Click to collapse
(i dunno what it means though--have to search )
BUT it didnt worked for me instead freezes at Vibrant start-up screen. So i Couldnt switch back to CWM. I Odin back to JFD with repartition clicked and my vibrant was locked (network lock). Finally, I got it cleared by application named Galaxy_S Unlock by Helroz from the market.
Now I am at the very beginning again. I am now on 2.1 JFD. I dont know WHY this happening to me .. :crying:
gonna try again with GB bootloaders.. BUT Im sick of failing and going back to 2.1 (my friends who are having captivate had no problem)
Speedy5150 said:
Is your Samsung Vibrant (T959) Rooted.?
Click to expand...
Click to collapse
At the time i was trying it was NOT rooted.. But now i have it rooted because i needed to unlock the network . which happened me for the very first time after flashing back to JFD using Odin..
Thank you guys for the links and thoughts on 2.2 ROMs.. I am not that expert . Thats why i was updating to 2.2 via KIES -- which is not a good idea as it seems with the ability 2 brick the device. I am going to get Bionix-V FishmanMod V4 FULL and install as http://forum.xda-developers.com/showthread.php?t=1441976 says..
It says Boot into clockwork recovery and i think i found something to do that in this thread http://forum.xda-developers.com/showthread.php?t=734164
I have to get ROM manager from market and go through it..
BUT Im damn upset with the RC5 ICS update by nyx being unable to installed into my device.. I will try with GB bootloaders flashed ..
If you are going to go with Fish's ROM, then all you need to do is Odin back to JFD and pull the CWR from my signature and put it on your internal_sd and label it as Update.zip. Then boot into recovery and hit Reinstall Packages (might have to do this twice) and your stock recovery (blue) will go to CWR (green) and you can flash away.
Fish also has a Odin package that you can flash his ROM through Odin and not have to deal with CWR.
ROM Manager is no longer supporting 2.1, so if you do go back to JFD, then it will be hard to get RM. It is out there somewhere but really all you need is the Update.zip from above to do it. I suggest that you stay on Fish's ROM for awhile and read about ICS installs and all the little things that are involved. If you do flash Fish's ROM, you don't need to mess with the bootloaders.
Btw, aside from Kies, messing with Bootloaders is one of the sure fire ways to hardbrick your device. It only takes seconds to flash them, but do it wrong and, well you know.
Good luck and ask if you have any.
Woodrube said:
If you are going to go with Fish's ROM, then all you need to do is Odin back to JFD and pull the CWR from my signature and put it on your internal_sd and label it as Update.zip. Then boot into recovery and hit Reinstall Packages (might have to do this twice) and your stock recovery (blue) will go to CWR (green) and you can flash away.
Fish also has a Odin package that you can flash his ROM through Odin and not have to deal with CWR.
ROM Manager is no longer supporting 2.1, so if you do go back to JFD, then it will be hard to get RM. It is out there somewhere but really all you need is the Update.zip from above to do it. I suggest that you stay on Fish's ROM for awhile and read about ICS installs and all the little things that are involved. If you do flash Fish's ROM, you don't need to mess with the bootloaders.
Btw, aside from Kies, messing with Bootloaders is one of the sure fire ways to hardbrick your device. It only takes seconds to flash them, but do it wrong and, well you know.
Good luck and ask if you have any.
Click to expand...
Click to collapse
thanks alot for the info brother.. some guys told me STUPID.. but YOU guys are awesome.. I am a newbie to this flashing and stuff.. but learned a lot from XDA . Thanks again for the reply. now I have stock 2.1 with ROOT . (rooted cuz i had to unlock the vibrant). I will flash to Fish's 2.2 ROM soon. BTW may i ask you after moving to Fish's ROM and later if i need to move to ICS still can I do it without messing with Bootloaders..
Thank you
That is what we are here for in the Q&A/General sections.
Regaring your question about Gingerbread bootloaders being needed:::Yes and No.
Gingerbread bootloaders were required in the infancy of ICS ROMs bc they prevented what is called "Rainbows" in your clockwork where you couldn't see anything. The options were there but you just couldn't see them. Then as ICS evolved, the need for GB bl's lessened and now you don't need them at all.
But...There's always a but...Gingerbread bl's are recommended by most of the devs for ICS builds because they seem to work better with the custom recoveries that come with some of the kernels. There is more to it but in short, GB bl's are not required but recommended.
If you go to my ICS install guide, in the middle pages and more again at the end, Yosup (highly respected user) and I have a detailed conversation about bootloaders and their installation. Once he got over the fear and did it, he was hooked and flashing ICS ROMs weekly if not more. It is a very informative section of that thread.
Hello, at the start i wanted to install some new ICS rom for my Vibrant..i try to root it with one click and i couldn't do that coz i had froyo(2.2update)..so i read some forums and found solution in odin...i used that to turn back to stock eclair where i rooted the phone ...but the problem is that now i can't install any application on the device(i need ROM manager)..i get to android market and ,click on application but nothing is happening, no download at all...than i try to use android injection with apks that i found on the net , but nothing, i always get INSTALL_FAILED_OLDER_SDK...so now i am stuck i have: fimware version-2.1 update 1,baseband T959UVJFD, kernel 2.6.29 can you tall me should i do?? thx
Read the guide in my signature on how to install ICS ROMs. It has an update.zip that you can use for CWR.
ROM manager no longer supports 2.1 (Eclair), so that is why you can't see it in the market.
Download the clockwork mod recovery file (update.zip) and save it to the internal storage on the phone. Then reboot into recovery and install packages. Might have to do it twice. Then you'll be in CWM recovery. Install from from there.
Sent from my SGH-T959 using XDA
The AIO Vibrant toolbox might be something you need to look at. you can find it here http://forum.xda-developers.com/showthread.php?t=954509
guide
i followed your guide...flashed CM7, than i try to flash Euphoria RM2.1(ICS) and flashing is starting all ok , than after 30 secs i see message 'Random offset 0x302' and it's not going forward with flashing,i pulled out battery and try 2 more times,and there is always the same problem, i'm on CM7 now(and i don't have google play what should i do? can you recoommand me some good and stable gingerbread ROM for Vibrant(if i goona be unable to install ICS Rom) thx
Woodrube said:
Read the guide in my signature on how to install ICS ROMs. It has an update.zip that you can use for CWR.
ROM manager no longer supports 2.1 (Eclair), so that is why you can't see it in the market.
Click to expand...
Click to collapse
FWIW, and this is not a knock on Team Passion (they do excellent work but few updates), but Euphoria is somewhat outdated. There are plenty of ICS ROMs out there that are more up-to-date and when ICS went from 4.0.3 to 4.0.4 there were significant code changes that were done. I suggest ICZen, or Slim or CM9.
But if you want to stay on Euphoria (AOKP based), this is from my guide:
If you get the RANDOM OFFSET error.
Don't freak out. This is an ICS security feature (as posted in Passion's FAQ post). All you have to do is pull your battery and boot back into recovery and reflash ICS over itself (just like you did with the initial CM7 bootloop) and it should push through. You may need to do this multiple times. I have read of people having to do it up to 5x. YMMV though.
Click to expand...
Click to collapse
Edit:
***----> I am having all kinds of trouble with my browser today at work, so if I don't respond right quick, that is why. But I'll get back to you or some others out there can help.
stack
man, now i am completly stack, i try to flash slim ics, found the file for vibrant, but it culdn't flash , in the middle it just stoped..and phone is just rebooting it self when i enter cw mod i can't install any other ROM from internal sd, it says no files found ffs now i can't even use phone, i need help emergently
Woodrube said:
FWIW, and this is not a knock on Team Passion (they do excellent work but few updates), but Euphoria is somewhat outdated. There are plenty of ICS ROMs out there that are more up-to-date and when ICS went from 4.0.3 to 4.0.4 there were significant code changes that were done. I suggest ICZen, or Slim or CM9.
But if you want to stay on Euphoria (AOKP based), this is from my guide:
Edit:
***----> I am having all kinds of trouble with my browser today at work, so if I don't respond right quick, that is why. But I'll get back to you or some others out there can help.
Click to expand...
Click to collapse
I suggest you Odin immediately. I fear that the next screen you will see is the Encryption Unsuccessful screen. Make sure you hit repartition in Odin though since you reformatted your system from RFS/Ext4 to MTD when you went to CM7.
odin
ok i get into odin , marked repartiton but is sais fail ??? what should i do now?
Woodrube said:
I suggest you Odin immediately. I fear that the next screen you will see is the Encryption Unsuccessful screen. Make sure you hit repartition in Odin though since you reformatted your system from RFS/Ext4 to MTD when you went to CM7.
Click to expand...
Click to collapse
If you do get past all of these, but this is unlikely for a normal flash, get either Iczen or chimera.
Sent from my SGH-T959 using xda app-developers app