Installed the OTA stock ROM ICS 4.0.4 but unfortunately the optional SD card reader for the port won't be recognized anymore. Is there any possibility to reactivate separately or is this going alongside with each stock upgrade ?
Same issue here...
tom_54497morbach said:
Installed the OTA stock ROM ICS 4.0.4 but unfortunately the optional SD card reader for the port won't be recognized anymore. Is there any possibility to reactivate separately or is this going alongside with each stock upgrade ?
Click to expand...
Click to collapse
This is only supposed to work on touchwiz roms, not stock ones.:crying:
jackgar said:
This is only supposed to work on touchwiz roms, not stock ones.:crying:
Click to expand...
Click to collapse
And in wich rom on 4.0 has usb support? I use 3.2 from Isi and usb reader works fine. I want to move to 4.0 but i need usb support. CAN ANYONE HELP ME?????
ics 7500 port
afreitas2 said:
And in wich rom on 4.0 has usb support? I use 3.2 from Isi and usb reader works fine. I want to move to 4.0 but i need usb support. CAN ANYONE HELP ME?????
Click to expand...
Click to collapse
Someone already asked rs125 for the possibility of porting touchwized ics from 7500 like the one you and I have right now. I went back to isi's 3.2 when I saw asphalt 7 was totally unplayable with stock 4.0.4 nor any cm9/10. With Isi's 3.2 works near perfect, altough it drains battery faster than 4.0.4.
Same problem...
Not solution at this time ?
tom_54497morbach said:
Installed the OTA stock ROM ICS 4.0.4 but unfortunately the optional SD card reader for the port won't be recognized anymore. Is there any possibility to reactivate separately or is this going alongside with each stock upgrade ?
Click to expand...
Click to collapse
It's working just fine. You just need an app to mount the SD card. I use the one from Chainfire called StickMount, it mounts it in a folder in /sdcard partition. It also has an option to auto-mount every time you plug in the device, it runs a notification while the device is connected and when you click the notification it unmounts the device.
Sent from my GT-I9000 using Tapatalk 2
Al3cks said:
It's working just fine. You just need an app to mount the SD card. I use the one from Chainfire called StickMount, it mounts it in a folder in /sdcard partition. It also has an option to auto-mount every time you plug in the device, it runs a notification while the device is connected and when you click the notification it unmounts the device.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
:good: Al3cks
You're really the king of this tablet.
Tanks Al3cks
Le Dam said:
:good: Al3cks
You're really the king of this tablet.
Tanks Al3cks
Click to expand...
Click to collapse
No problem .
I came across the same problem, found the solution, and I figured I could help
Related
So I purchase the app yesterday and so far is working great is a good concept for those that like ASOP roms but dont want to give up the 3D feature...
How does it work?
gflam said:
If i told you that i'd have to kill you...
Nah it basically just makes imgs on your sdcard and creates file systems on it then the rom is extracted to the imgs and the boot.img of the rom is edited to tell what to mount. That's the basic idea but it's obviously a lot more complicated then that.
Click to expand...
Click to collapse
My two questions are:
Who is using it?
What roms are you running?
My personal setup:
Phone Rom: Miui 2.1.6
Slot 1: Olympus Deodex
Slot 2: Supra Rom 2.2
Slot 3:
Slot 4:
Now Thanks to this great app I need a bigger sdcard. 16gb not enough anymore..
https://market.android.com/details?id=com.drx2.bootmanager&hl=en
Current Version..
What's in this version:
V3.2
Changed 4 sd slots to infinite slots!
Galaxy Nexus Support
License Check extended to a week
ROMs do not need market installed for boot manager to run (requires updating boot manager in all slots)
Hide su toasts (superuser elite only)
Fix for force close when setting screen shot in MIUI rom's
Thunderbolt defaulted to force large boot.img
Fixed unsupported device using a key
Sms and Call Log synced between ROMs (you choose what ones too also requries updating boot manager in all slots)
I'm using it ha my evo 3d has this setup
Phone ROM: MIUI
Slot 1: Cyanogenmod
Slot 2: Infected Eternity ROM (Daily driver)
Thanks for the download glad you're enjoying the app
One of the few apps I've purchased. Working great.
Phone:ICS alpha 7 (kush's)
Slot 1: fresh
Slot 2: miui
Slot 3: Warm three point two
Sent from my PG86100 using XDA App
Phone Rom: Clean Rom 3.0 with ICS Spark theme
Slot 1: ICS Port by Joelz
I put this app up there with other must haves like Rom Manager, Root Explorer, and wireless Tether.
PhoneRom: FreEVO
Slot1: ICS port from Joel Z
Slot2: SenselessROM
Slot3: MIUI
Slot4: ICS port from kushdeck
Well very glad you guys all like the app we've worked hard on it been working on another app for the past two months hoping to have it out next week
If you like boot manager please rate and comment in the market it would be much appreciated
Just wondering if I can use this app after rooting with the HTC method for 1.5? Sure hope so, it sounds pretty sweet!
Sent from my PG86100 using xda premium
Will boot manager work well with a class 4 sd card?
ssjgoku24 said:
One of the few apps I've purchased. Working great.
Phone:ICS alpha 7 (kush's)
Slot 1: fresh
Slot 2: miui
Slot 3: Warm three point two
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
How did you get
Warm two pint two wirking i traid but i get a error creating the boot image??
gflam said:
Well very glad you guys all like the app we've worked hard on it been working on another app for the past two months hoping to have it out next week
If you like boot manager please rate and comment in the market it would be much appreciated
Click to expand...
Click to collapse
honestly you guys are doing a great job but I got a question why when i try to change the rom display picture it force close also i try installing warm two pint tree and get a error with the boot image
bagelicious said:
Just wondering if I can use this app after rooting with the HTC method for 1.5? Sure hope so, it sounds pretty sweet!
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
I think you need S-off someone correct me if im wrong!!!
Sent from my HTC EVO 3D using Tapatalk
DarkManX4lf said:
Will boot manager work well with a class 4 sd card?
Click to expand...
Click to collapse
I'm using the stock class 4 card & it works well
Phone ROM: ViperROM
Slot 1: Deck's ICS
Slot 2: freEVO
Shooter McGavin
1107963 said:
How did you get
honestly you guys are doing a great job but I got a question why when i try to change the rom display picture it force close also i try installing warm two pint tree and get a error with the boot image
Click to expand...
Click to collapse
Gonna say you're using miui when you go to switch the image we've already found that miui gallery handles things different/weirdly it's been fixed for a while now and is in the next update we've just been wrapped up in this other app we're working on. We plan to release next week and then we'll be working on a tool box for Sourcery ROM which is coming soon to the gnex and i originally did with eagle1967 on the droid1. Anyway hopefully we'll have the fix out for miui gallery very soon just been really busy for now just boot to another rom that isn't miui and change the image there.
Also let me know if it's not miui gallery although i'd be surprised if it wasn't
=========================
As for the class 4 card i only run sd roms lately and i'm using a class 2 card and heck if i can run one of these roms on a class 2 card and not complain about speed you should be golden on a class 4 the only thing that matters is finding your sd booster speed once found you should be able to run smoothly on any card
Ok so bootmanager and the roms have been working well on my 32gb class 4 card, but I ran into an issue. I have
Phone Rom: CleanRom 3.0 Preview 1
Rom 1: MIUI (latest version since this post)
Rom 2: decks ICS 1-6-07
When I boot into Decks ICS, I cannot boot back into another rom with BootManager it just keeps saying "Unfortunately, Boot Manager has stopped".....How do I boot back into the phone rom ?
DarkManX4lf said:
Ok so bootmanager and the roms have been working well on my 32gb class 4 card, but I ran into an issue. I have
Phone Rom: CleanRom 3.0 Preview 1
Rom 1: MIUI (latest version since this post)
Rom 2: decks ICS 1-6-07
When I boot into Decks ICS, I cannot boot back into another rom with RomManager it just keeps saying "Unfortunately, Boot Manager has stopped".....How do I boot back into the phone rom ?
Click to expand...
Click to collapse
Use boot manager to boot between Roms not rommanager
Sent from my PG86100 using XDA App
flintman said:
Use boot manager to boot between Roms not rommanager
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Sorry thats what I meant to say, I am using BootManager to boot between roms. I am currently in Decks ICS rom and trying to boot into the phone rom with BootManager and it give me the error....i'll fix my original post.
DarkManX4lf said:
Sorry thats what I meant to say, I am using BootManager to boot between roms. I am currently in Decks ICS rom and trying to boot into the phone rom with BootManager and it give me the error....i'll fix my original post.
Click to expand...
Click to collapse
the developer show a way to go back using recovery
Sent from my HTC EVO 3D using Tapatalk
DarkManX4lf said:
Sorry thats what I meant to say, I am using BootManager to boot between roms. I am currently in Decks ICS rom and trying to boot into the phone rom with BootManager and it give me the error....i'll fix my original post.
Click to expand...
Click to collapse
Use to happen to me, not anymore though. When it did, I would just reinstall it, problem solved.
My setup:
PhoneRom: CleanROM DE 2.0
Slot 1: Cyanogen 7.1
Slot 2:Evervolv ICS p6
Slot 3:Mikrunny 1.02 (Has not booted, something wrong with sense 3.5?)
Slot 4: CleanROM De 1.3, from awhile ago, haven't chosen what to replace it with
1107963 said:
the developer show a way to go back using recovery
Sent from my HTC EVO 3D using Tapatalk
Click to expand...
Click to collapse
Where did you see this?
DarkManX4lf said:
Where did you see this?
Click to expand...
Click to collapse
in the market video like at the end of the video he show you how to go back to the phone rom if boot manager doesnt do it for you...
Sent from my HTC EVO 3D using Tapatalk
DarkManX4lf said:
Where did you see this?
Click to expand...
Click to collapse
Just go into recovery, install zip, go to boot manager folder, choose phone ROM, then flash the .zip inside it
Shooter McGavin
piscesjoey said:
Just go into recovery, install zip, go to boot manager folder, choose phone ROM, then flash the .zip inside it
Shooter McGavin
Click to expand...
Click to collapse
Yes exactly please read the manual or at least watch the tutorial video it'll save everyone time ha but anyway yea uninstall and reinstall the app in that slot that should fix that
Hi everyone !
i have using a Samsung Galaxy S3 for one month now... and Cyanogenmod 9 for 2 weeks already.
I know about it since i have already been using Cyanogenmod for a year and a hlf on my previous phone.
My problem is very simple :
when i connect my phone to the computer, i have a screen asking me to choose a conexion type :
- MTP
- PTP
- UMS
the problem is that the last one (USB Mass Storage) is greyed out and i cannot choose it !!??
i have been searching xda forums without success about it...
My microSD is formatted in FAT32 (exFAT does not work with cyanogen)
My question now :
can anybody tell me if it works for him ? (galaxy s3 + CM9RC2 or nightly + FAT32 microSD + windows + UMS)
thanks a lot !
and thanks for the amazing work done by cyanogen team...
no answer ??
come on guys !
- samsung Galaxy s3 => best phone ever
- cyanogenmod => best rom
so i am shure we are a lot using this config !
still : have a nice day !
singer36 said:
Hi everyone !
i have using a Samsung Galaxy S3 for one month now... and Cyanogenmod 9 for 2 weeks already.
I know about it since i have already been using Cyanogenmod for a year and a hlf on my previous phone.
My problem is very simple :
when i connect my phone to the computer, i have a screen asking me to choose a conexion type :
- MTP
- PTP
- UMS
the problem is that the last one (USB Mass Storage) is greyed out and i cannot choose it !!??
i have been searching xda forums without success about it...
My microSD is formatted in FAT32 (exFAT does not work with cyanogen)
My question now :
can anybody tell me if it works for him ? (galaxy s3 + CM9RC2 or nightly + FAT32 microSD + windows + UMS)
thanks a lot !
and thanks for the amazing work done by cyanogen team...
Click to expand...
Click to collapse
i think samsung may have done the most stupid mistake and remove kernel support, its not on stock firmware either
Try the SGS3 Easy UMS. Search XDA.
thanks for your answers, but :
- easy UMS is meant for stock roms and derivates... which is not the case regarding CM.
so if anybody using SGS3 + CM9 could check on his phone, please confirm me !
here is what it should look like :
http :// img.tapatalk.com/bef6d0b6-a992-883a.jpg
but for me, third option is greyed... so i cannot select it...
thks
jgalvez21 said:
i think samsung may have done the most stupid mistake and remove kernel support, its not on stock firmware either
Click to expand...
Click to collapse
No USB Mass-Storage is part of ICS, not Samsung phones.
It doesn't work for me either, maybe it's not supported yet?
I am running CM9 too and UMS works every now and then. ES File explorer seems to continuously scan the extsd though so sometimes it takes a couple of tries until it's mounted
joshnichols189 said:
No USB Mass-Storage is part of ICS, not Samsung phones.
Click to expand...
Click to collapse
+1
Sent from my GT-I9300 using xda premium
well... in fact, according to what i've read, ICS does include UMS... but only for external SD cards...
Anyway, the fact that the option is visible in the usb share screen in cyanogen makes me think that it is/will be a part of CM.
therefore the question is :
- do my phone has a problem ?
- or is it a future option that CM team is currently developping ? (and yet not finished ?)
But Samusung definitely did not want us to get it...
PS : i just installed the latest nightly build of CM9 (android 4.0.4) on a galaxy S2 and i get UMS ! (through an 'android 2.3 style' usb share screen)
singer36 said:
But Samusung definitely did not want us to get it...
Click to expand...
Click to collapse
Samsung isn't trying to keep you from using UMS.
Sent from my GT-I9300 using Tapatalk 2
It doesn't work for me either, maybe it's not supported yet?
Click to expand...
Click to collapse
At least in CM10 Preview the kernel modules are present but it does not react to the commands.
It works just fine on my Galaxy SII (i777) running cm9. And it mounts both the internal and external SD cards in mass storage mode. However, I have a galaxy tab 10.1 that the option is also grayed out on. I am guessing each device has different drivers associated with UMS which may be why it isn't working on all devices yet. But, it definitely is not a problem in CM9... More the device it sits on.
Hi all I'm encountering an issue with cyanogen mod 9 4.0.3. When i try to transfer music from my computer to my external sd it tells me i cannot transfer the file. Just wondering if anyone has encountered this issue?
Thanks
time to updated your rom
cm9 is updated to 4.0.4 for months
bluefa1con said:
time to updated your rom
cm9 is updated to 4.0.4 for months
Click to expand...
Click to collapse
Don't see why i should have to update....
Mr.seddon said:
Don't see why i should have to update....
Click to expand...
Click to collapse
a lot of stuff is fixed
sensor and auto brightness is fixed
and a lot of new features added
bluefa1con said:
a lot of stuff is fixed
sensor and auto brightness is fixed
and a lot of new features added
Click to expand...
Click to collapse
4.0.3 didn't even have video camera...
That's not the point im trying to find out why i cant transfer files at all i get an error that says disconnected or failed
Mr.seddon said:
That's not the point im trying to find out why i cant transfer files at all i get an error that says disconnected or failed
Click to expand...
Click to collapse
An update will fix that problem.
Sent from my GT-I9100 using xda app-developers app
It has the emmc mount bug, it basically changes the internal and external sd around, I had it and it drove me nuts and i nearly bricked my phone sorting it out. Had to wipe and format everything and flash a stock based ROM. Now on Wanamalite(?) and very good it is too!
Sent from my GT-I9100 using xda premium
This is a compilation between me, houstonn and SnowLeopardJB. (Be sure to thank them!) It is stock jellybean 4.1.2 with a little modification. You do NOT need to do any special modifications/conversions to install this. Just flash in CLOCKWORKMOD only (twrp will not work). It will automatically change your language to english but the keyboard will still contain some korean characters. To change that go to settings>>language and input>>languages>>unselect korean (make sure ONLY english is selected and you will have all english)
Features:
- rooted
- busybox
- most stock bloat included
- LTE works
- access to all internal sdcard (16GB)
- access to external sdcard works now
- Google Now
- 3.4 kernel
- astro file manager as a system app
- 4.2 keyboard
Click to expand...
Click to collapse
Issues:
- rear camera not working THIS HAS BEEN FIXED HERE (thanks jefffeely)
- let me know of anything else
Click to expand...
Click to collapse
Instructions:
- download from here -------> Korean-JB-sk8tonn-v2.zip
- boot into clockworkmod
- wipe data/factory reset
- install zip
-reboot
-enjoy
Click to expand...
Click to collapse
TODO:
- add ex-dialer (depends on feedback)
Click to expand...
Click to collapse
Thanks:
SnowLeopardJB
houstonn
shelnutt2
everyone in #lg-optimus-g
Click to expand...
Click to collapse
Re: [4.1.2][JB][STOCK] Stock Jelly Bean Korean Port (01/26/13)
Hello and thanks to all the fellas that put this together. May i ask that you include all the lg launcher and peripherals,widgets etc..in a seperate zip,where we could push or flash?
Sent from my LG-F180K using xda premium
You might wish to add sd card to the not working list. I flashed it on formatted cache/dalvik/data/system. Everything works just fine and dandy but no SD card kills it for me :-/
DeathmonkeyGTX said:
You might wish to add sd card to the not working list. I flashed it on formatted cache/dalvik/data/system. Everything works just fine and dandy but no SD card kills it for me :-/
Click to expand...
Click to collapse
sk8: Don't forget to mention Shellnut2.. he was the one to unlock and modify the boot for me to get it all start for me to pass it along to you guys
we cant do anything about the external sd till source hits.. it's compiled in the kernel. since sk8 went live. I might as well link the Canadian one. gotta upload it tho heh..
houstonn said:
we cant do anything about the external sd till source hits.. it's compiled in the kernel. since sk8 went live. I might as well link the Canadian one. gotta upload it tho heh..
Click to expand...
Click to collapse
yah i figured i might as well. since its working pretty well. maybe someone on here can get camera working??
DeathmonkeyGTX said:
You might wish to add sd card to the not working list. I flashed it on formatted cache/dalvik/data/system. Everything works just fine and dandy but no SD card kills it for me :-/
Click to expand...
Click to collapse
internal sdcard works fine. just no external sdcard. unfortunately since korean model doesnt include an external sdcard the kernel was compiled without this feature.
I know, I call internal sd "internal nand" and external sd card "sd card". I just thought perhaps it should be in the OP. Thank you guys very much for getting this thing together.
DeathmonkeyGTX said:
I know, I call internal sd "internal nand" and external sd card "sd card". I just thought perhaps it should be in the OP. Thank you guys very much for getting this thing together.
Click to expand...
Click to collapse
thank you for pointing that out. just added it to the OP. i keep forgetting that we have an external sdcard. haha i only use my ext sd for backups in CWM.
it should be pointed out that recovery will always be able to see your external sdcard no matter what rom you have installed. so keep my cwm installed and you can always backup to ext sd
ph0dacbeit said:
Hello and thanks to all the fellas that put this together. May i ask that you include all the lg launcher and peripherals,widgets etc..in a seperate zip,where we could push or flash?
Sent from my LG-F180K using xda premium
Click to expand...
Click to collapse
yah that could be done pretty easily. ill see what i can come up with on monday. i might just make a completely bloated version and a de-bloated version
Re: [4.1.2][JB][STOCK] Stock Jelly Bean Korean Port (01/26/13)
Wowowow this is really exciting! Its pretty late (or early) to do a flash, but I'd be happy to do so in the morning and let you guys know of any problems. Again, great work!
Sent from my LG-E970 using xda app-developers app
sk8erwitskil said:
thank you for pointing that out. just added it to the OP. i keep forgetting that we have an external sdcard. haha i only use my ext sd for backups in CWM.
it should be pointed out that recovery will always be able to see your external sdcard no matter what rom you have installed. so keep my cwm installed and you can always backup to ext sd
Click to expand...
Click to collapse
Yeah I can't use a ROM that doesn't support external SD, so I'm stuck on stock remixes until jb source drops .
I have a lot of street and topo maps in addition to a bunch of mp3's and portable mass storage (exFAT ftw) that necessitate a 64GB SD card. I just wish phone manufacturers would load devices up with hundreds of GB worth of flash because NAND flash memory has gotten so freaking cheap that it would add next to nothing to the Bill o' Materials.
Re: [4.1.2][JB][STOCK] Stock Jelly Bean Korean Port (01/26/13)
sk8erwitskil said:
This is a compilation between me, houstonn and SnowLeopardJB. (Be sure to thank them!) It is stock jellybean 4.1.2 with a little modification. You do NOT need to do any special modifications/conversions to install this. Just flash in CLOCKWORKMOD only (twrp will not work). It will automatically change your language to english but the keyboard will still contain some korean characters. To change that go to settings>>language and input>>languages>>unselect korean (make sure ONLY english is selected and you will have all english)
Click to expand...
Click to collapse
Guys. Thanks for this port. Thanks also for all of the patience too. There have been many impatient folks in this forum and you guys have stuck it out to give the OG more life. I'm so glad I got this phone and I'm really glad for all of the devs.
Thanks sk8, houstonn, snowleopard, and shelnut. And anyone else involved
Sent from my Xoom using xda app-developers app
Re: [4.1.2][JB][STOCK] Stock Jelly Bean Korean Port (01/26/13)
Great work. I'll give this ROM a run.
Sent from my LG-E970 using xda premium
Re: [4.1.2][JB][STOCK] Stock Jelly Bean Korean Port (01/26/13)
Thanks for all your hard work guys!
Does the Canadian one differ in anyway from the Korean one? Camera? External SD?
____
Sent by telepathy
---------- Post added at 09:05 AM ---------- Previous post was at 09:02 AM ----------
Also, am I reading this right? This was done without source? I was under the impression that we weren't gonna get jelly bean until source dropped.
____
Sent by telepathy
Oh wow wrong thread lol. Please ignore this post!
the more testers the more we can get results faster...pls remember make a backup cause if you don't like it you can always restore in minutes...
Re: [4.1.2][JB][STOCK] Stock Jelly Bean Korean Port (01/26/13)
Can we use stock LG launcher? I like LG home
Sent from my LG-E970 using Tapatalk 2
Re: [4.1.2][JB][STOCK] Stock Jelly Bean Korean Port (01/26/13)
Read the thread. Stock boat is coming. Seriously though, read.
Re: [4.1.2][JB][STOCK] Stock Jelly Bean Korean Port (01/26/13)
Do have to go to Nexus first or can I just flash from what I have?
Sent from my LG-E970 using xda premium
Read the first post. It explicitly states that you don't have to convert jack didily squat.
This ROM has been tested and retested... IF you cannot follow instructions provided DO NOT FLASH,IF your wanting tweaks etc DO NOT FLASH OR ASK FOR THEM THERE ARE OTHER ROMS WITH YOUR WANTS AND DESIRES,Cannot dirty flash this,full wipe MANDITORY,DO NOT USE THIS WITHOUT PERMISSION, IF your wanting to use another kernel (99% stock is included) etc,DONT ASK HERE IF ISSUES ARISE (ASK THE KERNEL DEV) Folks who use this want a clean stable ROM..IF you are a flashaholic,I'd suggest copying pics,music etc to computer format your data partition then flash.
All things YOU CHOOSE to do to your phone are your responsibility,Not mine
GSM Versions ONLY
Now onto directions...Recovery used to flash this is included (use this only) stock recovery is included...Pull twrp recovery out of zip...Copy zip to internal storage...Flash recovery,factory reset wipe (from recovery) ,Install ROM...I suggest disabling animations in developer options to get the full effect of rom speed...Enjoy...
Whats included:
Speed Tweaks
Battery Tweaks
SD Card Tweaks
Screen Touch Tweaks(more sensative)
Dalvik Tweaks
Network Tweaks (Qualcomm)
Stock recovery
Twrp recovery
Weather images updated Thanks Basil3
Little louder sound Thanks ZeroInfinity
Read write module Thanks Flar
Rooted
Deodex'd
Stock file manager
Stock task manager
Quick office
Extreme Power Saving
Thanks to rayheath,pradeepvizz for testing for the euro device
3.15.1540.1 T6 - 8-29-2014
Download:
http://goo.gl/sgJMub
3.23.1540.1 T6 -11-12-2014
http://goo.gl/PVVtSQ
Blinkfeed Update 11-11-2014
http://goo.gl/Uuxw8q
Blinkfeed Update 12-10-2014
http://goo.gl/kG0LCt
Modified 3.23.1540.1 Hboot (Thanks santod040)
http://goo.gl/mNzMky cidnum: BS_US001,cidnum: BS_US002,cidnum: CWS__001
Twrp Backup 3.15.1540.1
Download:
http://goo.gl/vVaM9a
3.23.1540.1 Firmware zip
http://goo.gl/Cpqj7S
3.15.1540.1 OTA
http://goo.gl/91n0Fe
3.23.1540.1 OTA
http://goo.gl/VP6ISM
Mods by deagleone
http://goo.gl/AbvuHu
Donations:
Thank you...
bruce7373
swapgut
orvon.freeman
co.ag.2005
cortez.i
ozziedog
effezie
Changlog:
08-29-2014: Dalvik/Qualcomm/Kernel tweakage = Speed
9-23-2014: New Base 3.23.1540.1
11-10-2014: Updated apps/Camera Enhancements/other Miscellaneous
11-11-2014: Updated HTC apps/Camera Enhancements/other Miscellaneous Tweaks
Reserved
For me if needed.
So will 4g lte work on this build for us gsm users??
jwhood said:
So will 4g lte work on this build for us gsm users??
Click to expand...
Click to collapse
Hey bro, I can´t answer for the US Version, but it should... It works for me bro (International).
This is for international/developer build devices, cannot say it will work for cdma unlocked devices. I know itll work for international and Im on at&t with it and have lte working just fine
jwhood said:
So will 4g lte work on this build for us gsm users??
Click to expand...
Click to collapse
jwhood said:
So will 4g lte work on this build for us gsm users??
Click to expand...
Click to collapse
Wonders_Never_Cease said:
This is for international/developer build devices, cannot say it will work for cdma unlocked devices
Click to expand...
Click to collapse
Bro, I would suggest giving it a try, but back up first.
what about battery performers ?
best than this !
http://forum.xda-developers.com/showthread.php?t=2776665
halibil said:
what about battery performers ?
best than this !
http://forum.xda-developers.com/showthread.php?t=2776665
Click to expand...
Click to collapse
I can assure that will be better than the other, the other one is pure stock and this is atleast the logging and debug stuff removed, so you know.
Sent from my HTC One max using XDA Premium 4 mobile app
Hi,
I flashed this on my T6UL using CWM 6.0.4.8 (I know, I totally ignored your instructions :fingers-crossed and it works just fine. If I notice anything unusual I'll give feedback.
Thank you for the ROM & good job!
halibil said:
what about battery performers ?
best than this !
http://forum.xda-developers.com/showthread.php?t=2776665
Click to expand...
Click to collapse
Brother, yes... Battery is amazing and speed is awesome
Please what are differences between this ROM and this one : http://forum.xda-developers.com/showthread.php?t=2776665
ChahidHamza said:
Please what are differences between this ROM and this one : http://forum.xda-developers.com/showthread.php?t=2776665
Click to expand...
Click to collapse
It's basically the same ROM, just faster, more stable... Give it a try, I think you'll love it.
perfect Rom , super fast
thanks for everyone :victory:
Thanks, Glad your enjoying it...
First bump I ran into (but I am not sure if it is from the ROM or the device) - When I connect an OTG USB stick, the phone says it's in host mode and cannot charge, but I cannot see the USB OTG storage.
Tried formatting FAT32 and NTFS, tried stock file manager, ES File Manager and OTG Disk Explorer. I ran a diagnose with USB Host Diagnostics and this is the report.
The device I am using is an ADATA UD320 OTG
Just checked it, with app, rom is capable of it...and its a stock kernel not custom so dont think thats the issue. And based on the report...it would appear you need to enable 3rd party apps maybe? It also says device supports it...soo not sure there...no clue what that report is actually saying,very basic
TechGR said:
First bump I ran into (but I am not sure if it is from the ROM or the device) - When I connect an OTG USB stick, the phone says it's in host mode and cannot charge, but I cannot see the USB OTG storage.
Tried formatting FAT32 and NTFS, tried stock file manager, ES File Manager and OTG Disk Explorer. I ran a diagnose with USB Host Diagnostics and this is the report.
The device I am using is an ADATA UD320 OTG
Click to expand...
Click to collapse
TechGR said:
First bump I ran into (but I am not sure if it is from the ROM or the device) - When I connect an OTG USB stick, the phone says it's in host mode and cannot charge, but I cannot see the USB OTG storage.
Tried formatting FAT32 and NTFS, tried stock file manager, ES File Manager and OTG Disk Explorer. I ran a diagnose with USB Host Diagnostics and this is the report.
The device I am using is an ADATA UD320 OTG
Click to expand...
Click to collapse
Wonders_Never_Cease said:
Just checked it, with app, rom is capable of it...and its a stock kernel not custom so dont think thats the issue. And based on the report...it would appear you need to enable 3rd party apps maybe? It also says device supports it...soo not sure there...no clue what that report is actually saying,very basic
Click to expand...
Click to collapse
I use OTG USB with this ROM without any issues
both of stock manager & ES manager can manage it without any problem
Please I have a recent HBOOT I think 2.xx.xx And I want to switch s-off my device, can you please explain how to do that. Thank you !