Related
Hello,
Does any of these apps seem to work for you guys?
It seems that the tablet's touchscreen isn't working well enough to capture every line.
When taking notes in every notetaking app or drawing lines in every drawing app causes dotted lines or become 'stairs' when drawing from left bottom corner to right top corner..
I am running vegacomb 3.2 (upd2) and tried every calibration tool i could find.
So, is it hardware related or is it only on vegacomb?
thnks, Kars!
Yeah, I find the Vega's touchscreen pretty weak.
I tried to play Fruit Ninja THD and it's almost unplayable.
I have exactly the same problem with you. (using Vegacomb 3.2 update 3)
And I even have some "touch death area", witch means the touch screen in that area are less responsive ,in the right side of the screen.
I've tried many screen recalibration apks but in vain.
I'm wandering if this problem can be fix in the future....
Have you used the build in calibration tool?
The screens are not super.. but they should perform better then what your describing. I reinstalled my tablet 2 days ago but I had Scetchbook on here when I was running VegaComb (android 3.0.1) and it worked fine.
*re installing it now on VegaCream RC2* it works fine here, no line interruptions, smooth lines exactly where I put them. I do remember that some of those rom versions had issues with not-too-great-touch-reponce. So its not the best solution, but a different rom maybe?
Hi Friends,
I got a problem. In the CyanogenMod I have an Offset on the bottom of the screen (2mm) when I hold the softbuttons in my right hand. This problem occured in the official builds of CM and in the FXP - buils, including the latest, too. This bug is really annoying (especially while writing).
Do you have any idea?
Hi, i have this problem too in FXP054, exactly on left side of screen. I noticed another 2 problems:
1) Czech keyboard is QWERTZ not QWERTY!
2) CArrier network data should be turned off after firts installation, it has eaten me half of my credit!
I'm much new, so posted here.
Do you have the problem also when you got the screen in horizontal mode? It's very complicated to hit the buttton for changing the layout to numbers or to make a dot.
Have you tried other builds?
Which model do you own?
I own ST15i, Cyanogenmod 7.2.0 RCO FXP054. But the offset was in nightly 20 too.
The problem is only in horizontal mode i think (only in 90°). Hitting space when writing is my nightmare!
Did you report the bug via bugtracker?
Sent from my ST15 using XDA App
Can anybody help us?
Ok, I found out something:
The bug isn't present in any other orientation than the horizontal mode (softbuttons pointing to the right)
In Multitouch, when I keep another point pressed, also not present.
I already tryed screen recalibration and everything. Please anybody help me.
Update:
The bug is sadly still present in FXP103 CM7.2 - I tried everything that I could imagine.
CM9 is still very unstable, but from what I tested, the bug didn't occure there.
Please, expirienced members: help me!!
To the people of Turl's and Jokersax' CM9.
I have a touchscreen re-calibration app, I just tested it out and it seems to be working perfect. Don't hold me to it, but i think this is a pretty good temporary fix.
I'd love feedback, i didn't code this but after a few searches i was able to realize this is a universal fix for touchscreens that have been acting up.
Special thanks to gojimi. At least i hope.
Can you link the source please.
Cheers!
Just a question, do we actually need touch calibration after flashing cm9? Cause AFAIK, when I tried the jokersax rom, the only problem I had was app incompatibility and APN errors...
helmy96 said:
Just a question, do we actually need touch calibration after flashing cm9? Cause AFAIK, when I tried the jokersax rom, the only problem I had was app incompatibility and APN errors...
Click to expand...
Click to collapse
Sometimes, it will act up.
Ouh. Ok, didn't think it would happen... hope u don't think n
that I a newb thru this question, I'm well informed, just not very active due to sch...
helmy96 said:
Ouh. Ok, didn't think it would happen... hope u don't think n
that I a newb thru this question, I'm well informed, just not very active due to sch...
Click to expand...
Click to collapse
I know what you mean, sometimes homework takes away most of my time too. But just use CM9 as your daily driver, and you'll be well informed on any issues that will occur.
This actually screwed up my touchscreen..anyway to uninstall?
Hi,
I have a software issue with my touchscreen :
1/ Got stock ROM, then CM7, then CM7-Neutrino-2.2 => screen was OK
2/ Installed CM9-Turl-v8 => an unresponsive horizontal line appeared, around 100px high
3/ Tried to come back to CM7, CM7-Neutrino, CM9-Joker-0.4 => bug still there
4/ Tried this calibration app, but couldn't click the button because it was under the unresponsive line, so turned the phone into landscape or upside-down to execute => bug still there
5/ Flashed PDS fix => bug still there, fear of a hardware issue
6/ Installed CM9-Joker-0.5 with awesome Installer => touch screen goes totally crazy (phantom-touches), BUT the line is finally responsive !! So, le wild idea appears
7/ Retried this calibration app, this time in the right way => SCREEN FINALLY OK !!!...
8/ ... For about 2 hours... Now my phone combines 2 issues : a new horizontal line is unresponsive (thinner than the old one), and crazy phantom-touches happen really often...
I was desperate, but now I know my problem is software, I see hope ! Am I the only one to have this problem ?
Thank you in advance
David Guillot said:
Hi,
I have a software issue with my touchscreen :
1/ Got stock ROM, then CM7, then CM7-Neutrino-2.2 => screen was OK
2/ Installed CM9-Turl-v8 => an unresponsive horizontal line appeared, around 100px high
3/ Tried to come back to CM7, CM7-Neutrino, CM9-Joker-0.4 => bug still there
4/ Tried this calibration app, but couldn't click the button because it was under the unresponsive line, so turned the phone into landscape or upside-down to execute => bug still there
5/ Flashed PDS fix => bug still there, fear of a hardware issue
6/ Installed CM9-Joker-0.5 with awesome Installer => touch screen goes totally crazy (phantom-touches), BUT the line is finally responsive !! So, le wild idea appears
7/ Retried this calibration app, this time in the right way => SCREEN FINALLY OK !!!...
8/ ... For about 2 hours... Now my phone combines 2 issues : a new horizontal line is unresponsive (thinner than the old one), and crazy phantom-touches happen really often...
I was desperate, but now I know my problem is software, I see hope ! Am I the only one to have this problem ?
Thank you in advance
Click to expand...
Click to collapse
You are not the one who have this problem I had nottachtrix at first and touchscreen was working well when I instal MIUI 2.4.27 from there started my problem now my buttons sometime stop working when I bloc and then unblock phone buttons start working sometime it need restart phone I didn't try this ap yet but I think it's software because when buttons stop working my touchscreen is working full only buttons are not responsive is there some fix pleas PM me
After using nottachtrix arora installer to calibrate my touch would have random deadzones and w,e,s,z didnt work. Tried recalibrating with installer to only make it randomly worse or slightly better. This did the trick thoough. Thanks very much!!
help me
i was used gingermod rom and change to aokp milestone 6 suddenly yesterday seen that there are area in screen didnt work i have tryied to back to gingermod still not work try this software but also didnt work what i have to do please help me
hi help me
hi help me
i have one tablet eken w70 wiht the touch invsted help me
this touchRecelibrete not succes
help me
[email protected]
Can you please give us the correct way for Re calibration
Sent from my MB860 using xda app-developers app
i'll try it, my screen not responding now
Hello guys, it seems I am having issues with the multi touch function of the screen, when I play games and use the joystick it works fine until I press another button.Then it reverses back to the neutral position....
So basically.. it doesn't accept to inputs at the same time.
The same thing happens while texting, If I hold down the CAPS button while typing it will not capitalize what I type(as it should), I have to hit the caps after every letter.
This happens with both energy and xborders roms, and their respective kernels, when I reflash the kernel, it seems to fix the problem temporarily but then it breaks again...
I am at a loss??? what do u guys think?
166 views and no reply :-(
kamehame-BUMP
Fixed it... apparently Go Launcher breaks my multi touch screen feature... wierd.. after all this troubleshooting all I had to do was unistall that
siigh..
maybe this will help someone else
Actually Go Locker or any lockscreen replacement causes problems with multi-touch feedback . Did you have that installed ?
Sent from my HTC Amaze 4G using xda premium
yea thats what I meant to say... Go locker was causing the problem... I switched to magic locker and it seemed ok for a while but then it started doing the same thing...
I wish there was a way to replace the sense ring without multi touch issues
Hell yea . I downloaded like 40 go locker themes . Come to find out all my games were broken . It took me soo long to figure out the problem . Oh well . Still waiting on ICS.
Sent from my HTC Amaze 4G using xda premium
I can confirm this issue too.
I had widgetlocker installed forever. I had thought the phone was just a bit unresponsive until I loaded up zenonia 4 and the controls didn't work at all.
I found this thread and uninstalled widgetlocker. This fixed the issue right up. Still a bummer though.
Bear with me here, this issue is kind of hard to describe. When I am playing a game that requires touch inputs from both hands, I often get bugs. It's most obvious in games that have controller-style overlays. As is normal, I am using my left thumb to tell a character to move right or left, and then I press the button on the right to jump. However, when I release my jump, I stop running. The screen no longer recognizes that my left thumb has been pressed down the whole time and should still be moving in the direction I am pressing. This happens in Bean's Quest, Chono'n'Cash, Delver, Gunman Clive, and any other game of this nature I have tried on my device.
I played some of these games just fine on my old Evo. Is anyone experiencing this issue? I experienced it on stock as well as several custom roms I have tried.
Turn off "Htc gestures" you'll find it in settings, display & gestures!
When the display senses three finger inputs it renders it touch inputs useless...run a multi-touch test app and you'll see.
gutrrob said:
Turn off "Htc gestures" you'll find it in settings, display & gestures!
When the display senses three finger inputs it renders it touch inputs useless...run a multi-touch test app and you'll see.
Click to expand...
Click to collapse
Doesn't seem to have fixed my issue, I am still having problems with some two finger games. I will be using two fingers just fine, when I remove one finger from the display the first finger is no longer recognized even though it is still touching. I have to remove the first finger and press it again every time.
Do U have any type of lock screen installed. If so uninstall. Use only stock.
Swyped from my eVo
ryanalan82 said:
Do U have any type of lock screen installed. If so uninstall. Use only stock.
Swyped from my eVo
Click to expand...
Click to collapse
Appears that widgetlocker is the culprit! Is this issue documented or known, exactly? What causes it? Thanks so much for the help. I will surely miss widgetlocker.
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A
I encountered this recently
It seemed to get "stuck" after using multi touch gestures in-game. Tapping the game with two fingers often "unstuck" it, but overall it was extremely frustrating.
This was on an APK not designed for the phone, though
Sorry to bring back up an old thread (is 6 days even considered old?) anyway you HAVE to disable the HTC 3 touch setting gesture because it will ignore anything more than 2 (3 will only register if you swipe up or down, but sense itself registers it, nothing else).
Just made the video below as proof (forgive my foreign accent xD):
Our screen supports (at least) 10 different points (was going to try 11 but I could not get my nose on the screen with my fingers and my girlfriend is asleep).
EDIT: Two things, one: I had widgetlocker installed while I did the above video, it caused no problems. Two: the maximum number of inputs our phones can handle is 10, incase anyone was curious.
EDIT 2: While I don't have the issue with widgetlocker it seems that it is a known problem, but you don't have to disable the lock screen altogether. Go into widgetlocker settings> advanced> retain system key guard. Source: http://forum.xda-developers.com/showthread.php?t=1652038
Racer Of All said:
Sorry to bring back up an old thread (is 6 days even considered old?) anyway you HAVE to disable the HTC 3 touch setting gesture because it will ignore anything more than 2 (3 will only register if you swipe up or down, but sense itself registers it, nothing else).
Just made the video below as proof (forgive my foreign accent xD):
Our screen supports (at least) 10 different points (was going to try 11 but I could not get my nose on the screen with my fingers and my girlfriend is asleep).
EDIT: Two things, one: I had widgetlocker installed while I did the above video, it caused no problems. Two: the maximum number of inputs our phones can handle is 10, incase anyone was curious.
EDIT 2: While I don't have the issue with widgetlocker it seems that it is a known problem, but you don't have to disable the lock screen altogether. Go into widgetlocker settings> advanced> retain system key guard. Source: http://forum.xda-developers.com/showthread.php?t=1652038
Click to expand...
Click to collapse
Installed widget locker again. tried this, multi touch failed. Uninstalled, and back to 10.
Swyped from my eVo
ryanalan82 said:
Installed widget locker again. tried this, multi touch failed. Uninstalled, and back to 10.
Swyped from my eVo
Click to expand...
Click to collapse
Did you try my edit 2? The Retain System keyguard? I can assure you that I have Widgetlocker installed and I have the 10 inputs (that video was recorded with widgetlocker running).
[SOLVED!] - HTC Evo 4G LTE touch screen trouble - WidgetLocker is the problem
Retaining system keyguard in WidgetLocker worked for me! Thank you for this Racer for All. (Actually I found your YouTube video, and a link to this thread)
I was wondering why all the games I played all of a sudden stopped functioning properly (in terms of touch controls... Example: MineCraft PE, moving forward and trying to look left or right - suddenly character would stop moving.)
Sorry to dig up an old thread, but I want people to know if they have WidgetLocker (and don't want to uninstall it) just go to Settings - Advanced - Retain system keyguard - zmag