Related
Tried to flash Cm9 and now can not turn on or go into recovery or go into download. Looks like I totally bricked I777. Any suggestions or help.
Please.
More information please
Sent from my SGH-I777 using Tapatalk 2
Tried flash CM9 then Gapps then ucld4 modem .After that phone get stuck on update modem. After that I could turn it off and now can not do anything. I have Samsung Galaxy S2 from ATT. Thank you
Pookh007 said:
Tried flash CM9 then Gapps then ucld4 modem .After that phone get stuck on update modem. After that I could turn it off and now can not do anything. I have Samsung Galaxy S2 from ATT. Thank you
Click to expand...
Click to collapse
Did you reboot in between flashing stuff?
Sent from my SGH-I777 using Tapatalk 2
No
Pookh007 said:
No
Click to expand...
Click to collapse
Well there you go, it's well known that you have to reboot in between flashing stuff
Sent from my SGH-I777 using Tapatalk 2
what can i do right now?
Pookh007 said:
what can i do right now?
Click to expand...
Click to collapse
If it won't go into download or recovery try getting a jig otherwise I have no clue
Sent from my SGH-I777 using Tapatalk 2
Thank you for your help. Already ordered jig . Let you know when I try
Why aren't u posting this in the cm thread ?
Sent from my SGH-I777 using Tapatalk 2
Hey, instead of creating another thread, I'll just post in here.
My SGH-i777 was working fine, I downloaded the latest Update CM9 Nightlies 2012-06-09 directly from CM's download site. I was previously running CM9 Nightlies 2012-06-03.
I put the Update in the root of the internal SD memory. I started up ROManager, and selected the "Flash ROM Update" option. The Phone shut off, as normal, so it can go into Recovery Mode and Flash the Update automatically.
The phone never got into the Recovery Menu! I waited for about 5 mins, but nothing was booting up on the screen.
So I removed the battery and inserted it back in to turn it back on. It shows the Galaxy SII Splash Screen and then the screen turns off, and it just keeps flickering on and off. You cant see the flickering unless your in a dark room, in the daylight you won't notice it, because the backlight turns on for a split second and its really faint.
So I ruled out that its not that the battery has died, because before I started up ROManager the battery was full.
Anyways, can you guys help me? Thanks in advance!
leo9891 said:
Hey, instead of creating another thread, I'll just post in here.
My SGH-i777 was working fine, I downloaded the latest Update CM9 Nightlies 2012-06-09 directly from CM's download site. I was previously running CM9 Nightlies 2012-06-03.
I put the Update in the root of the internal SD memory. I started up ROManager, and selected the "Flash ROM Update" option. The Phone shut off, as normal, so it can go into Recovery Mode and Flash the Update automatically.
The phone never got into the Recovery Menu! I waited for about 5 mins, but nothing was booting up on the screen.
So I removed the battery and inserted it back in to turn it back on. It shows the Galaxy SII Splash Screen and then the screen turns off, and it just keeps flickering on and off. You cant see the flickering unless your in a dark room, in the daylight you won't notice it, because the backlight turns on for a split second and its really faint.
So I ruled out that its not that the battery has died, because before I started up ROManager the battery was full.
Anyways, can you guys help me? Thanks in advance!
Click to expand...
Click to collapse
You obviously read nothing before trying to flash otherwise you would have known not to use rom manager unless you're on CM9 already
Edit : okay you were already on CM9 but you still should stay away from rom manager, it's not known for being reliable
Sent from my SGH-I777 using Tapatalk 2
What kernel were u using prior to trying to update and did u flash the correct version of Rom manager? I know last time ilooked there were multiple options for the i777.
Sent from my SGH-I777 using Tapatalk 2
Nick281051 said:
You obviously read nothing before trying to flash otherwise you would have known not to use rom manager unless you're on CM9 already
Edit : okay you were already on CM9 but you still should stay away from rom manager, it's not known for being reliable
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
If it's not reliable, why does CM9 come with it installed on its ROMs?
And I've used it a few times before and never had a problem with it. Also like I said, if it's so unreliable, I'm sure the devs over at CM would have taken it out of their ROMs...
Phalanx7621 said:
What kernel were u using prior to trying to update and did u flash the correct version of Rom manager? I know last time ilooked there were multiple options for the i777.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
I was using the Siyah Kernel made for the SGH-i777. And the latest version of Rom Manager.
Edit: The thing im confused about is I didn't flash anything yet and it just stopped working. I would understand that if I flashed something and in the middle of flashing it stopped working then that's completely different.
leo9891 said:
If it's not reliable, why does CM9 come with it installed on its ROMs?
And I've used it a few times before and never had a problem with it. Also like I said, if it's so unreliable, I'm sure the devs over at CM would have taken it out of their ROMs...
I was using the Siyah Kernel made for the SGH-i777. And the latest version of Rom Manager.
Edit: The thing im confused about is I didn't flash anything yet and it just stopped working. I would understand that if I flashed something and in the middle of flashing it stopped working then that's completely different.
Click to expand...
Click to collapse
There you go, you have to use CM9 kernel you can't use siyah as I remember it
Sent from my SGH-I777 using Tapatalk 2
I've always had problems trying to flash from ROM Manager. Always boot into CWM manually when flashing. If you can't get it into download mode and see it in Odin, you may be screwed. There's a another way to get into download mode...something like removing the battery, connect to PC via USB cable, then hold volume buttons down while inserting the battery...or something. I searched and couldn't find it again.
Sent from my SGH-I777 using XDA
Big is right . Best to boot into cwm manually, I've had problems with using Rom manager to do it as well, the few times I've used it. Also, Im 99% sure Rom manager comes built into cm itself, as a system app for all cm releases. So i don't think they stick it in there for just our device or anything. But i could be wrong.
Sent from my SGH-I777 using Tapatalk 2
Nick281051 said:
There you go, you have to use CM9 kernel you can't use siyah as I remember it
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
I've updated from Update-CM9-Nightlies-2012-06-03 to Update-CM9-Nightlies-2012-06-05 before and went smooth. Anyways, I guess ROM Manager might be unstable. That sucks for me!
big_boludo said:
I've always had problems trying to flash from ROM Manager. Always boot into CWM manually when flashing. If you can't get it into download mode and see it in Odin, you may be screwed. There's a another way to get into download mode...something like removing the battery, connect to PC via USB cable, then hold volume buttons down while inserting the battery...or something. I searched and couldn't find it again.
Sent from my SGH-I777 using XDA
Click to expand...
Click to collapse
Phalanx7621 said:
Big is right . Best to boot into cwm manually, I've had problems with using Rom manager to do it as well, the few times I've used it. Also, Im 99% sure Rom manager comes built into cm itself, as a system app for all cm releases. So i don't think they stick it in there for just our device or anything. But i could be wrong.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
I can't get into Download Mode or Recovery Mode. Like I said I didn't even get a chance to try and Flash anything, I was about to backup my current ROM and while RM was booting into Recovery Mode, its like it just froze on a black screen.
IDK if its a Hardware Problem or my Mother Board got fried somehow cause the screen turns on and shows "Samsung Galaxy SII" and then it just turns off. And in the daylight it looks like the phone is off, but if your in a dark room, you can see the screen's backlight flickering on and off.
Do you guys think that USB Jig will work?
Thanks guys for you help!
EDIT: BTW, I'm now stuck using a crappy WP7! It was my step-sons, LOL. It is like a watered down smart phone... I don't even think it deserves the title "Smart Phone".
Pull the battery and leave it out. Then go into download mode the usual way by holding the two volume buttons and plugging in the USB cable. The phone wil go into download mode with power supplied by the cable. If this fails, then there is definitely some serious problem, and hardware can not be ruled out as a possible cause.
creepyncrawly said:
Pull the battery and leave it out. Then go into download mode the usual way by holding the two volume buttons and plugging in the USB cable. The phone wil go into download mode with power supplied by the cable. If this fails, then there is definitely some serious problem, and hardware can not be ruled out as a possible cause.
Click to expand...
Click to collapse
Thanks!!!!! Your a life saver! I plugged it into the phone charger and held the Vol. Down Button and it was able to boot into Download Mode and the screen did not shut off like it has been on every boot up I've tried!
Right bow I'm charging it so I can plug it into my laptop and restore my phone later tonight after work.
This is my first Android and even though it kinda crapped out on me, I still love it better than the iPhone.
Thanks again!
Hi Guys,
Last night for some reason my GT-19100T running CM9.1.0 wouldn't lock by pressing the power button, the button itself seems to be working. I can press the button down but nothing happens. I left it for the night and came into work this morning, I thought it might be a bug with the rom, i managed to boot into recovery via the "Rom Manager" app and was going to flash to CM10. My problem is now that i am in recovery, I can't select anything as the power button is not working. I can scroll through the recovery menu with the volume buttons but cant select anything, and now soon as the phone turns on after removing the battery, it goes straight to recovery mode and i cant get around it.
I have tried leaving the battery out for about 3 hours and same thing. I can boot into download mode, But at the moment that doesn't help me.
Any suggestions on what i can do? I'm not worried about warranty so i may pull the phone apart and clean it tonight. Thanks in advance.
Update:
After much playing around with the button i can get it work, it is very temperamental and requires to be pushed in the right way. Was able to flash with Touch recovery and am now updating to CM10 nightlies. Thanks all for your help on my first post.
SirBigBird said:
Hi Guys,
Last night for some reason my GT-19100T running CM9.1.0 wouldn't lock by pressing the power button, the button itself seems to be working. I can press the button down but nothing happens. I left it for the night and came into work this morning, I thought it might be a bug with the rom, i managed to boot into recovery via the "Rom Manager" app and was going to flash to CM10. My problem is now that i am in recovery, I can't select anything as the power button is not working. I can scroll through the recovery menu with the volume buttons but cant select anything, and now soon as the phone turns on after removing the battery, it goes straight to recovery mode and i cant get around it.
I have tried leaving the battery out for about 3 hours and same thing. I can boot into download mode, But at the moment that doesn't help me.
Any suggestions on what i can do? I'm not worried about warranty so i may pull the phone apart and clean it tonight. Thanks in advance.
Click to expand...
Click to collapse
Hi!
First, have you tried flashing a stock firmware? If that does not help, you can try cleaning your hardware.. it may be dusty or something.. be careful! I hope you get this sorted out.
Also, i hope my suggestion will help you out, cheers!!
Sent from my GT-I9100 using xda premium
First, have you tried flashing a stock firmware?
I am currently flashing back to xxlpq via odin and see if that changes anything. Will post back with results.
Thanks.
SirBigBird said:
First, have you tried flashing a stock firmware?
I am currently flashing back to xxlpq via odin and see if that changes anything. Will post back with results.
Thanks.
Click to expand...
Click to collapse
Okay, will wait for your feedback
Sent from my GT-I9100 using xda premium
Okay, Flashed back to stock ICS rom, Got a little bit further but still no go. It gets the "S" loading screen and stays there, Still cant do factory reset via Android Recovery as it also needs the power button to select. Someone suggested installing CWM touch recovery but i cant find a .tar version of "recovery-clockwork-touch-5.8.1.5-galaxys2" downloaded from CWM website. Any suggestions on how i can install this without using recovery? Thanks.
SirBigBird said:
Okay, Flashed back to stock ICS rom, Got a little bit further but still no go. It gets the "S" loading screen and stays there, Still cant do factory reset via Android Recovery as it also needs the power button to select. Someone suggested installing CWM touch recovery but i cant find a .tar version of "recovery-clockwork-touch-5.8.1.5-galaxys2" downloaded from CWM website. Any suggestions on how i can install this without using recovery? Thanks.
Click to expand...
Click to collapse
I guess you have to flash them with odin..
1. Flash a stock firmware to get you out of bootloop
2. Flash the latest siyah kernel cause it's a touch recovery via odin as well
Do you want me to post the links or will you find it yourself?
I hope this helps, cheers!
Sent from my GT-I9100 using xda premium
Ok, so I was about to install custom ROM to a unrooted SGS2 phone, I didn't have a computer so I decided to root my phone installing cwm.zip through stock recovery and then installing su and busybox via cwm. then I backed everything up, downloaded a custom ROM with a custom kernel and cwm touch recovery with it. I went to stock recovery again and installed cwm.zip to get to cwm recovery and first made a nandroid backup and then installed the custom ROM. It turned off while it was on aroma installer and now it doesn't go on. Is it bricked? is there anything I can do?
Sent from my GT-I9300 using xda app-developers app
is it because I was trying to install a custom ROM through temporary Cwm? any help is appreciated. My girlfriends phone )
Sent from my GT-I9300 using xda app-developers app
If you can get to download mode or recovery then try flashing the from again
Preferably use Odin by getting to download mode
Sent from my GT-I9100 using xda app-developers app
jokerrrrrrr said:
If you can get to download mode or recovery then try flashing the from again
Preferably use Odin by getting to download mode
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I can't get anywhere.. and I assume I can't do anything even if I get it plugged on a computer? if it doesn't go to Odin or stock recovery or no where at all what are my chances? bricked I guess. BTW will anyone at Samsung know that I tried flashing my phone if I take it to be fixed? I mean if it doesn't go on, don't they have to replace everything and they would never even know that i tried to flash it?
Sent from my GT-I9300 using xda app-developers app
You soft-bricked it maybe...
Did you try booting up your phone pressing the POWER + HOME + VOL UP keys? If it boots into recovery, then just do a nandroid restore...
If you're just concerned with bringing the phone back to life... Boot up your phone pressing POWER + HOME + VOL DOWN keys. It will show you a green n' black menu, then press VOL UP. It will then show an Android robot with "downloading" written below. Now just connect it to your PC (I hope you already installed drivers for S2) and start ODIN. (Make sure KIES is off)
Use a .tar.md5 or .tar(or any other format) file(or files depending on your firmware) and put it in the respective box. Leave the tickboxes as they are and DO NOT use a .pit file AND DON'T TICK repartition.
Click start flash and your phone should boot up on the stock ROM again!
Just trying to help you!
Do you camera is hot ? If yes "I THINK IT"S MAYBE HARDBRICK ?"
Can you buy the Usb jig or do it ?
Paulius7 said:
Do you camera is hot ? If yes "I THINK IT"S MAYBE HARDBRICK ?"
Can you buy the Usb jig or do it ?
Click to expand...
Click to collapse
I'm guessing also its hardbrick, don't know what is USB jig? if it is hardbrick, is there anything at all I can do? it doesn't go to Odin or recovery or nowhere, i can't get the screen on at all.
Sent from my GT-I9300 using xda app-developers app
With USB jig Your phone go to Download mode without VOLUME+POWER AND MENU BUTTONS
P.S. Hardbrick is Motherboard damage.(Or maybe you install rom it's not for you galaxy ?)
P.S.S. I haved a CPU damaged so it's not working(I can't boot up it like you) i go to gurante i they fix that.
P.S.S.S. http://forum.xda-developers.com/showthread.php?t=1891197
Paulius7 said:
With USB jig Your phone go to Download mode without VOLUME+POWER AND MENU BUTTONS
P.S. Hardbrick is Motherboard damage.(Or maybe you install rom it's not for you galaxy ?)
P.S.S. I haved a CPU damaged so it's not working(I can't boot up it like you) i go to gurante i they fix that.
P.S.S.S. http://forum.xda-developers.com/showthread.php?t=1891197
Click to expand...
Click to collapse
where can I get a USB jig? I don't know if my motherboard is broken, it doesn't turn on at all, screen stays off what ever I press. and even if a put the charger in. in the evening I will have a computer and I can connect it to my PC but I assume that there is nothing I can do anyways because I can't just turn the phone on. I was trying to install a custom ROM with a temporary CWM recovery. didn't have cwm yet installed but I assumed it will be installed at the same time I install the rom because it included it. so if I have hard bricked my phone and I take it to be repaired, will they see I have tried to flash the phone? will it be fixed with guarantee?
Sent from my GT-I9300 using xda app-developers app
But you Flash rom REALLY FOR YOUR PHONE ? And i think next time you need to root the phone and Then install.I say maybe it's CPU is broken so you can go in gurantee and ask them for Repair. I don't know if you hard brick if they Fix but i think They did.
I say look into this thread http://forum.xda-developers.com/showthread.php?t=1891197 You can see countury and city so borrow form you contury and if can City
Paulius7 said:
But you Flash rom REALLY FOR YOUR PHONE ? And i think next time you need to root the phone and Then install.I say maybe it's CPU is broken so you can go in gurantee and ask them for Repair. I don't know if you hard brick if they Fix but i think They did.
I say look into this thread http://forum.xda-developers.com/showthread.php?t=1891197 You can see countury and city so borrow form you contury and if can City
Click to expand...
Click to collapse
Yes I'm sure I was installing a right ROM meant for my phone. The resurrection remix 3.0.9 for I9100. this is what I did exactly.
1. went to stock recovery
2. installed CWM.zip from external SD card.
3. Got into temporary CWM recovery and then made a nandroid backup with success.
4. tried to wipe data but got stuck and rebooted my phone. It was now stuck in the galaxy logo.
5. I went to stock recovery again to install CWM.zip and this time I straight installed the resurrection remix and I got into Aroma installer and everything went fine until on 50% the phone turned off and now doesn't go on.
P.S. I was still on Stock ROM and kernel and recovery when trying to do this. Was using a temporary CWM recovery to install a custom ROM and kernel. I had root access already.
P.S2 I put the charger in and it doesn't even show the battery icon, nothing. and yes the camera is getting hot. Is it a hard brick / dead brick or what ever you call it? if I take it to guarantee, will they fix it or will they be able to see that I damaged my phone myself? thanks
P.S3 can the USB jig work on this problem also?
Sent from my GT-I9300 using xda app-developers app
If it soft bricked i think JTAG will help you
But if not try this:
Try to change battery MAYBE THAT HELP i don't now i gueses(Sorry bad english) i don't know really
Try this:
Step one would be the Jig
Step two would be a paid for JTAG repair
Step three would be a paid for service centre repair
And try to get out battery for about 1 hour
http://forum.xda-developers.com/showthread.php?t=1661909
I will do this when I get home from work, thanks a lot for all the advice.
If anyone has other suggestions, please help. thanks.
Sent from my GT-I9300 using xda app-developers app
andresantos said:
Yes I'm sure I was installing a right ROM meant for my phone. The resurrection remix 3.0.9 for I9100. this is what I did exactly.
1. went to stock recovery
2. installed CWM.zip from external SD card.
3. Got into temporary CWM recovery and then made a nandroid backup with success.
4. tried to wipe data but got stuck and rebooted my phone. It was now stuck in the galaxy logo.
5. I went to stock recovery again to install CWM.zip and this time I straight installed the resurrection remix and I got into Aroma installer and everything went fine until on 50% the phone turned off and now doesn't go on.
P.S. I was still on Stock ROM and kernel and recovery when trying to do this. Was using a temporary CWM recovery to install a custom ROM and kernel. I had root access already.
P.S2 I put the charger in and it doesn't even show the battery icon, nothing. and yes the camera is getting hot. Is it a hard brick / dead brick or what ever you call it? if I take it to guarantee, will they fix it or will they be able to see that I damaged my phone myself? thanks
P.S3 can the USB jig work on this problem also?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
You said The resurrection remix 3.0.9 for I9100 I9100 ist the Samsung Galaxy S2!! Not S3
kaboma said:
You said The resurrection remix 3.0.9 for I9100 I9100 ist the Samsung Galaxy S2!! Not S3
Click to expand...
Click to collapse
I know, I'm trying to flash my girlfriends galaxy s2
Sent from my GT-I9300 using xda app-developers app
andresantos said:
I know, I'm trying to flash my girlfriends galaxy s2
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Ohh, ok I see :laugh::laugh:
@kaboma
Next time Read carrefully and you see it
@andresantos
How the going with the phone ?
Was it on a 4.0.4 ROM? Did you check if it has a bad chip? ie. is susceptible to the emmc bug before flashing?
That could possibly be the cause, although I cant be sure now unless you have her stock rom/kernel details. And if it is, I'm sorry but AFAIK theres no solution to that yet.
Do try getting hold of a USB jig and trying your luck with that first, though.
Hope it works out :fingers-crossed:
Did you try to wipe ANYTHING on stock 4.0.4 kernel ? if you did, then you've been afected by the emmc brickbug and there's no other way to fix it other than replacing the entire motherboard.
Did you try to put your device in download mode (pressing the power button, home button and volume down key) ? If you can get into it, flash a stock rom and problem solved.
Can you enter recovery mode ?
Next time you try to get cwm, just flash siyah and you'll get the whole package (permanent cwm + root + plenty of features) and only after that try to wipe and install custom roms
@Poroto
HE SAID HE CAN"T GO ANYWHERE.
So it's can be Hardbrick or like (Ram's or CPU or Video card is broken) MAYBE
Because i had i problem with CPU it's can't go anywhere it was problem with CPU
Rooted my phone earlier today for the first time downloaded rommanager (lol saw the sticky thread) tried to download cyanogenmod 9.1 on my phone kind of rushed through all i did was clear dalvik cache because it was checked off my phone just displays 'samsung galaxy sII gt-i9100' with the indication I have rooted yellow triangle with a exclamation point. It doesnt go any further the phone flashes every now and then. I'm a total noob should of read carefully and really ****ed up please help.
Reboot to recovery and flash cm9 again. It takes two flashes. One to setup the file system and one to flash the rom. Use the 3 button combo or adb to get to recovery. If you need adb it is in my signature.
Sent from my SGH-I777 using xda premium
Red_81 said:
Reboot to recovery and flash cm9 again. It takes two flashes. One to setup the file system and one to flash the rom. Use the 3 button combo or adb to get to recovery. If you need adb it is in my signature.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Hey Red having trouble getting it into recovery mode i used ADB I can get it into download mode just idk how to get it into recovery scared to mess my phone up even more
Did I read this right---u SAW THE THREAD about not using rom manager and used it anyway? Just making sure because obviously I must be mistaken.
Sent from team Pirate headquarters using Beanacle ROM. As soon as he builds it.
Phalanx7621 said:
Did I read this right---u SAW THE THREAD about not using rom manager and used it anyway? Just making sure because obviously I must be mistaken.
Sent from team Pirate headquarters using Beanacle ROM. As soon as he builds it.
Click to expand...
Click to collapse
Nah I used it first then joined to fix my phone and read the thread
Adb wait-for-device reboot recovery
Sent from my SGH-I777 using xda premium
Ran the program Having trouble getting it to recognize my device
Sorry I forgot you were going to CM. Go download the android sdk and then install the USB driver from inside there. CM variants use the nexus drivers versus the Samsung i777 drivers.
Sent from my SGH-I777 using xda premium
aeonicflux said:
Nah I used it first then joined to fix my phone and read the thread
Click to expand...
Click to collapse
Aaah OK.
Sent from team Pirate headquarters using Beanacle ROM. As soon as he builds it.
Red_81 said:
Sorry I forgot you were going to CM. Go download the android sdk and then install the USB driver from inside there. CM variants use the nexus drivers versus the Samsung i777 drivers.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Hey Red I downloaded Android SDK then installed the Google USB driver. Then I ran recovery mode in the ADB folder to no avail it still says 'waiting for your device to be connected.'
Can I flash a rom in download mode. So confused. I can get the download mode screen if I use the 3 button technique. I don't know how to bring it into recovery.
aeonicflux said:
Hey Red I downloaded Android SDK then installed the Google USB driver. Then I ran recovery mode in the ADB folder to no avail it still says 'waiting for your device to be connected.'
Can I flash a rom in download mode. So confused. I can get the download mode screen if I use the 3 button technique. I don't know how to bring it into recovery.
Click to expand...
Click to collapse
Use the three button combo but without a usb plugged in
122ninjas said:
Use the three button combo but without a usb plugged in
Click to expand...
Click to collapse
All I get is the 'Samsung Galaxy S2 I-9100' screen it doesn't go any further. Dum question I guess but how do you get it into recovery mode hold the 3 buttons yeah but till when the screen (SGS2 screen) comes up then take your finger off the power and keep it on the volume up/down.
aeonicflux said:
All I get is the 'Samsung Galaxy S2 I-9100' screen it doesn't go any further. Dum question I guess but how do you get it into recovery mode hold the 3 buttons yeah but till when the screen (SGS2 screen) comes up then take your finger off the power and keep it on the volume up/down.
Click to expand...
Click to collapse
Just keep holding it until it boots into CWM
122ninjas said:
Just keep holding it until it boots into CWM
Click to expand...
Click to collapse
Having alot of trouble ugh.. Is there any guides that show how to get into recovery mode or use ADB is there anything else out there so lost
aeonicflux said:
Having alot of trouble ugh.. Is there any guides that show how to get into recovery mode or use ADB is there anything else out there so lost
Click to expand...
Click to collapse
Guy already told you how
Sent from Team Pirate's Transmitter Thingy
The last option would be to flash back to stock since you can get into download mode. Then flash a kernel with cwm baked in. Then you can try flashing cm9 again after you read through their installation instructions.
Sent from my SGH-I777 using xda premium
As the title says, is there a way to turn off the phone that is stuck in bootloop? Only thing I can think of would be to let the battery drain but I just wanted to know if there were other options that I didn't know of. I need to do this so I can safely attempt to get into fastboot without potentially bricking the phone.
Hold volume up and power to get to recovery. You should be able to do this while it bootloops
Sent from my LG-H901 using Tapatalk
garymachete said:
Hold volume up and power to get to recovery. You should be able to do this while it bootloops
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
I forgot to mention that I'm in stock rom. Doing that just gives me the stock recovery.
I got my phone working again. Can a mod close this thread please? Much appreciated.