My Galaxy s2's home button is not working proprly.
It had this issue when i upgraded to ICS4, but when i upgrade it to 4.0.4 it didnt appear,,
but today suddenly the same issue appeared again
i have to touch the home button so hard to make it work
any solution?
andromeda88 said:
My Galaxy s2's home button is not working proprly.
It had this issue when i upgraded to ICS4, but when i upgrade it to 4.0.4 it didnt appear,,
but today suddenly the same issue appeared again
i have to touch the home button so hard to make it work
any solution?
Click to expand...
Click to collapse
Same issue here after flashing to newest CM 10.1 nightly for GS2
you guys sure this is software related? you didn't press it too hard trying to get to recovery, did ya?
andromeda88 said:
My Galaxy s2's home button is not working proprly.
It had this issue when i upgraded to ICS4, but when i upgrade it to 4.0.4 it didnt appear,,
but today suddenly the same issue appeared again
i have to touch the home button so hard to make it work
any solution?
Click to expand...
Click to collapse
Sounds more like a hardware issue than software.
Related
I have purchased second hand galaxy S2 I9100.
I am experience LCD problem from the start. First w botton on horizontal arrangment not working.
I tried *#0*# test code for LCD and found one column from top to bottom not working.
Now LCD is behaving strange after i remove the screen protector. It goes to automatic selection in the middle of screen after some time of use e.g it automatically got selecting every thing which is on middle left of screen
I talked to some of my friends and they think it is a software issue.
I have tried flashing it with different ROMs using ODIN but no improvement results
It also go to downloading mode by only selecting volume down during power on.
Please help as I am not getting anything for solution
If that's happening with every rom you've tried (I presume you've gone back to stock firmware to test as well ?), then that's a hardware problem.
Home key Download mode
Yes I have also tried stock firmware of my model.
I have one more question. My Samsung galaxy S2 goes to download mode by pressing power and volume down button only e.g without pressing home key button. My home key button function properly at the android home.
I that also some issue with the hardware?
Try flashing the XWKL1 fw.. It pretty much fixed mine
Sent from my GT-I9100 using xda premium
MistahBungle said:
If that's happening with every rom you've tried (I presume you've gone back to stock firmware to test as well ?), then that's a hardware problem.
Click to expand...
Click to collapse
Yes I have also tried stock firmware of my model.
I have one more question. My Samsung galaxy S2 goes to download mode by pressing power and volume down button only e.g without pressing home key button. My home key button function properly at the android home.
I that also some issue with the hardware?
If its still under warranty get the screen replaced. I did.
I.lost a whole collumn and wasn't too stressed about it but before long another collumn went. I expect more would have followed so better to get it replaced at their cost not ours.
----------------------
GTI9100
Hydra H2O 1.2.1
fluxi xx.01_rc5
Hi there guys.
Anyone here is having problems whit the Menu and Home buttons on the Mini Pro?.
First the menu button stop working and he fix itself after a week, but now, several months laters, i have a problem whit the home button, when i press it ,seems that is OK (i hear the click) but dont work anymore, after a few days the menu button also stop working(again). So anyone here is having the same problems?
Thanks
Sorry for my English.
probably hardware problem
Does your phone come into contact with water? For example, in the rain?
Mrozik1990 said:
Does your phone come into contact with water? For example, in the rain?
Click to expand...
Click to collapse
Hi mate, only one time (with the rain), but the problem start many monts laters.
Rust. The contacts rust but not immediately.
OK. So I flashed to the JB rome from Cyno. 10 ROM. Security screen and power button working. Flashed back to Stock ROM and security and power button not working again. Flashed BLACKSTAR X ROM and security and power button still not working. Flashed back to JB and everything working again.. Anyone have any idea what would cause this?
So I haven't got any responses to this issue so I will ask another question. Is there any way to reset the security settings on the phone? Is there an apk file that can be flashed or some other way to reset them to default?
I have searched the forums and have even called Samsung. My power button and lock screen have both quit working correctly. The power button used to give me an option to either power off, reboot, airplane mode etc. but now after holding it down it just shuts the phone down without presenting me with the menu. My lock screen also does not work anymore.. I cannot lock my phone. Any help would be appreciated.. I have also done Google searches with not luck.. I have found this problem with other devices other than the note. I have also factory reset from within the system and at the recovery mode. When this happen I was on stock rooted ROM.
Me to Donald. I still have not figured it out. I went back to stock through Kies and the problem is still there. The only way I can get my lock screen and power button to work correctly is to flash a custom ROM. I cannot believe we are the only 2 having this problem. LOL
I am having the same exact problem and I cannot figure it out
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
DonaldJP said:
I am having the same exact problem and I cannot figure it out
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
I had the exact issue and followed this link to resolve it http://forum.xda-developers.com/showthread.php?t=1870561
Good luck!
aus
Hey everyone. ..
I have updated my galaxy s3 to the latest version 4.1.2
Everything runs smoothly but I am facing a problem with the keyboard in landscape mode, when I hold a button to display the numbers, the popup that appears is missing the numbers and only shows empty squares...
This problem is not present in portrait mode.
I did a full reset and I have tried clearing the data for the Samsung keyboard but that didn't fix it.
Thanks in advance.
manchaester said:
Hey everyone. ..
I have updated my galaxy s3 to the latest version 4.1.2
Everything runs smoothly but I am facing a problem with the keyboard in landscape mode, when I hold a button to display the numbers, the popup that appears is missing the numbers and only shows empty squares...
This problem is not present in portrait mode.
I did a full reset and I have tried clearing the data for the Samsung keyboard but that didn't fix it.
Thanks in advance.
Click to expand...
Click to collapse
didn't come across such a query till now! a screenshot would be helpful.
Weirdest issue I've ever come across.
Phone is less than 2 weeks old and was working fine. No hard drops, no water damage. I was running CM 10.1 (3.1.10 Blade Kernal) without issues until today. All of the sudden the capacitive buttons stopped responding. The backlight still comes on.
I flash a recovery to Paranoid Android which I tried out before, still doesn't work. Pie controls work, but on screen navigation buttons don't respond.
In TeamWin Recovery the on screen navigation buttons also don't respond, which is super annoying since I can only do one task, and then have to hard reset my phone.
I did a factory reset and they still don't work. Any idea what's going on here?
chrriiiss said:
Weirdest issue I've ever come across.
Phone is less than 2 weeks old and was working fine. No hard drops, no water damage. I was running CM 10.1 (3.1.10 Blade Kernal) without issues until today. All of the sudden the capacitive buttons stopped responding. The backlight still comes on.
I flash a recovery to Paranoid Android which I tried out before, still doesn't work. Pie controls work, but on screen navigation buttons don't respond.
In TeamWin Recovery the on screen navigation buttons also don't respond, which is super annoying since I can only do one task, and then have to hard reset my phone.
I did a factory reset and they still don't work. Any idea what's going on here?
Click to expand...
Click to collapse
As per more experienced developers and contributors - parandroid is a mess (I am not sure whatever that means , since I have so far only tried CM 10.1 & Slimbean... )
Addicted2xda said:
As per more experienced developers and contributors - parandroid is a mess (I am not sure whatever that means , since I have so far only tried CM 10.1 & Slimbean... )
Click to expand...
Click to collapse
Well I first experienced the issue running CM 10.1.
Since then I've relocked it and loaded the stock RUU where things got REALLY weird. The navigation keys still didn't work and soon nothing was really responsive. I can't even get past the unlock screen. The ring bounces when I touch it but it won't drag and unlock. So it's still detecting something, but it's not really responding at all. I can't even turn the thing off now as holding the power button down restarts the phone. what is this i don't even....
bump!
I need help with this and after extensive searching, I haven't found anyone else with this sort of problem.
I'm trying to install a ROM via TWRP but my capacitive and on screen navigation buttons don't do anything, so I'm stuck without a ROM at the moment.