>Sorry Friends
>
>I am an amateur user.
>After the flash automatically by the program go lg the phone movistar operator.
>Now out of the SIM card unlocking mode.
>Next issue
>Back to the language without of Persian keyboard! If it had that before!
>This the phone is by my loan.
>Please help.
>
>I found out what my ROM to the installation KDZ files doing.
>But I can not find my ROM.
I thank you from the tips previously
The first problem was partly resolved
Now my SIM card works without any problems after hard reset
But when the operator name comes to turn.
But. Persian keyboard do not
58 person read my problme!!? but. .. any answer!!!
help me plz
Sent from my GT-I9000 using Tapatalk
Hello, I changed my rom several times with Odin, and now I can't get 3G signal, just "G", not even an Edge "E".. I tried a lot of roms after that, roms from sammobile for my mobile operator, any tips to solve that?
Thanks!
#Edit
For some reason, after I installed a deodex room (gt-s5830c_zta_vjlb3-deodex_rb) my 3G started to work again.. but if I just change the PDA, it stop.. Wasn't supposed to PHONE be the file which make the 3G work or not? This VJLB3 is an old version of my operator, when I got the newest version the 3G did not work.. fml
Isnaiter said:
Hello, I changed my rom several times with Odin, and now I can't get 3G signal, just "G", not even an Edge "E".. I tried a lot of roms after that, roms from sammobile for my mobile operator, any tips to solve that?
Thanks!
#Edit
For some reason, after I installed a deodex room (gt-s5830c_zta_vjlb3-deodex_rb) my 3G started to work again.. but if I just change the PDA, it stop.. Wasn't supposed to PHONE be the file which make the 3G work or not? This VJLB3 is an old version of my operator, when I got the newest version the 3G did not work.. fml
Click to expand...
Click to collapse
Are you absolutely positive that your 3g was not related to service operator when you were on the stock firmware in question ? Have you tried your SIM card on other phones to confirm the functionality of 3g network ?
Did you check you APN settings :
Dial "*#*#4636#*#*" > Phone Information >Set preferred network type > WCDMA preferred Does it set correctly ?IF not then choose wcdma; press turn off radio then press turn on radio; press home button(not back button). You will get 3g. If not then reboot.
Have you lost your IMEI ? what you see when you dial "*#06#" was it gone on your last non - deodex fw ? what is your phone variation ?
what was your last CSC/PDA/MODEM part , which does support your base band/3g and other things , before you lost it ?
Your country / Region and carrier you are staying too please ,, we might need to flash the only Modem part over Odin to resolve this issue according to instruction i will provide . However you need to be more specific by providing more details such as name of possible custom Roms you did flash. stock CSC/PDA/MODEM details you did try and other minor details will become valuable in this troubleshooting .
ehsanotaku said:
Are you absolutely positive that your 3g was not related to service operator when you were on the stock firmware in question ? Have you tried your SIM card on other phones to confirm the functionality of 3g network ?
Did you check you APN settings :
Dial "*#*#4636#*#*" > Phone Information >Set preferred network type > WCDMA preferred Does it set correctly ?IF not then choose wcdma; press turn off radio then press turn on radio; press home button(not back button). You will get 3g. If not then reboot.
Have you lost your IMEI ? what you see when you dial "*#06#" was it gone on your last non - deodex fw ? what is your phone variation ?
what was your last CSC/PDA/MODEM part , which does support your base band/3g and other things , before you lost it ?
Your country / Region and carrier you are staying too please ,, we might need to flash the only Modem part over Odin to resolve this issue according to instruction i will provide . However you need to be more specific by providing more details such as name of possible custom Roms you did flash. stock CSC/PDA/MODEM details you did try and other minor details will become valuable in this troubleshooting .
Click to expand...
Click to collapse
Hello, thanks for the answer, the same SIM card worked on with 3g with the deodex rom, and wasn't working before it. I got no 3g with one rom, changed it to deodex and got 3g, changed again and lost, all of this in a few minutes, so wasn't problem with the operator or SIM. I didn't check the APN, I just downloaded an app from my country to try to set it. I don't know if I did lost my IMEI, I have it wrote in the back of phone, but didn't check if is the same after all that changes (and if is possible to change it), I changed the rom a LOT of times, first times with CWM and after with Odin, with the I variation, C and M (trying to go back to original stock). I think the original firmware was an old version of M variation (S5830MUWHKL4 maybe), my country is Brazil and the operator of the SIM card is Claro, the last stock from sammobile I tried was the last one from Claro, tried with and without CSC after splitfus2 it.
Isnaiter said:
Hello, thanks for the answer, the same SIM card worked on with 3g with the deodex rom, and wasn't working before it. I got no 3g with one rom, changed it to deodex and got 3g, changed again and lost, all of this in a few minutes, so wasn't problem with the operator or SIM. I didn't check the APN, I just downloaded an app from my country to try to set it. I don't know if I did lost my IMEI, I have it wrote in the back of phone, but didn't check if is the same after all that changes (and if is possible to change it), I changed the rom a LOT of times, first times with CWM and after with Odin, with the I variation, C and M (trying to go back to original stock). I think the original firmware was an old version of M variation (S5830MUWHKL4 maybe), my country is Brazil and the operator of the SIM card is Claro, the last stock from sammobile I tried was the last one from Claro, tried with and without CSC after splitfus2 it.
Click to expand...
Click to collapse
I really don't understand how Deodex Rom has anything to do with your 3g/IMEI/APN settings. Because Deodexing is basically repackaging of your APKs in a certain way, such that they are reassembled into classes.dex files.
By doing that, all pieces of an application package are put together back in one place, thus eliminating the worry of a modified APK conflicting with some separate odexed parts.
custom ROMs or APKs are always deodexed to ensure integrity.
Ok so you are from Brazil (Claro) and on C variation of the device, thus splitfus2 and wipe package troubleshooting is not supported for C variation . (Splitfus2 only generates the normal extraction of CSC/MODEM/PDA parts from your single xxx.tar.md5 file, noting more in this case ). Use this pre- configured app for normal parts generation instead with ease .
This is the list of the correct xxx.tar.md5 for your device and you have tried the last update for your carrier from this page ( PDA : S5830CVJMA1/CSC: S5830CZTAMA1 )according to you , right ? and you lost your 3g support ?
I got couple of suggestion for your 3g :
1- Use 2012 tested Brazilian Multi Package Firmware from this page ( PDA: VJLF3/CSC: ZTOLF1/VJLF2) .
2. Check you got the correct Odin and drivers installed on your system ( Odin3.v3.07.Cooperve.exe ; Drivers post ) .
3- Get into Download mode ( pressing Vol(+) + Vol(-) + Power Keys) :
- -press volume up
-Open Odin3.v3.07.Cooperve.exe
-Connect your phone to PC via USB cable.
-Make sure that your phone is detected in "ID:COM" area.
- Put your CSC/MODEM/PDA parts into their respective places . Do not use pit file and Do not tick re-partition though . Factory reset and reboot selected by default >> push the START !
- DO NOT disconnected nor disturb the flashing Nand process , until the process being terminated.
Get into e3 stock recovery and wipe your /data .
Now in your brand new FW :
Dial "*#*#4636#*#*" > Phone Information >Set preferred network type > WCDMA preferred /only and confirmed my instruction in first post has met with your APN settings.
Dial *#06# as instructed in first post ( IMEI box with your 15 diigit number must appear )
CSC is your consumer software customization and it is specified to geographical region and carriers. CSC contains the contains the software packages specific to that region, carrier branding and also APN settings for data connection .
WE can easily change the settings inside our Multi - package we flashed for carrier compatibility etc etc :
Code:
Just type *#272*Device IMEI# at Phone dial pad. For IMEI type *#06#.
Select the CSC that you want.
Click Install.
Phone will be rebooted by itself.
Note –Changing this will factory reset your phone. Do backup before perform this task.
Note – CSC can sometime be corrupt. It may lead to infinite loop. Reason unknown.
report your progress please for future reference ,, Thank you for reading this mate ,,,,,,,,,,,
ehsanotaku said:
I really don't understand how Deodex Rom has anything to do with your 3g/IMEI/APN settings. Because Deodexing is basically repackaging of your APKs in a certain way, such that they are reassembled into classes.dex files.
By doing that, all pieces of an application package are put together back in one place, thus eliminating the worry of a modified APK conflicting with some separate odexed parts.
custom ROMs or APKs are always deodexed to ensure integrity.
Ok so you are from Brazil (Claro) and on C variation of the device, thus splitfus2 and wipe package troubleshooting is not supported for C variation . (Splitfus2 only generates the normal extraction of CSC/MODEM/PDA parts from your single xxx.tar.md5 file, noting more in this case ). Use this pre- configured app for normal parts generation instead with ease .
This is the list of the correct xxx.tar.md5 for your device and you have tried the last update for your carrier from this page ( PDA : S5830CVJMA1/CSC: S5830CZTAMA1 )according to you , right ? and you lost your 3g support ?
I got couple of suggestion for your 3g :
1- Use 2012 tested Brazilian Multi Package Firmware from this page ( PDA: VJLF3/CSC: ZTOLF1/VJLF2) .
2. Check you got the correct Odin and drivers installed on your system ( Odin3.v3.07.Cooperve.exe ; Drivers post ) .
3- Get into Download mode ( pressing Vol(+) + Vol(-) + Power Keys) :
- -press volume up
-Open Odin3.v3.07.Cooperve.exe
-Connect your phone to PC via USB cable.
-Make sure that your phone is detected in "ID:COM" area.
- Put your CSC/MODEM/PDA parts into their respective places . Do not use pit file and Do not tick re-partition though . Factory reset and reboot selected by default >> push the START !
- DO NOT disconnected nor disturb the flashing Nand process , until the process being terminated.
Get into e3 stock recovery and wipe your /data .
Now in your brand new FW :
Dial "*#*#4636#*#*" > Phone Information >Set preferred network type > WCDMA preferred /only and confirmed my instruction in first post has met with your APN settings.
Dial *#06# as instructed in first post ( IMEI box with your 15 diigit number must appear )
CSC is your consumer software customization and it is specified to geographical region and carriers. CSC contains the contains the software packages specific to that region, carrier branding and also APN settings for data connection .
WE can easily change the settings inside our Multi - package we flashed for carrier compatibility etc etc :
Code:
Just type *#272*Device IMEI# at Phone dial pad. For IMEI type *#06#.
Select the CSC that you want.
Click Install.
Phone will be rebooted by itself.
Note –Changing this will factory reset your phone. Do backup before perform this task.
Note – CSC can sometime be corrupt. It may lead to infinite loop. Reason unknown.
report your progress please for future reference ,, Thank you for reading this mate ,,,,,,,,,,,
Click to expand...
Click to collapse
Me too, I don't know why the heck just the deodex rom got 3g signal, I flashed the same PDA version, but no deodex, and there was no 3g..
Originally my Ace is an M variation, I bought it unlocked on the internet and came a 5830M, probably with S5830MUWHKL4 rom.
Yes, I got that rom from that page and used the splitfus2 on it. I'm waiting my dad get back from work (I'm trying to do the best fix on the phone so he can use it without problems) to start trying again to put the last rom with your instructions. Also, do I really need to flash CSC? This part comes with a lot of trash apps that is impossible to remove by normal ways, and I don't want to root the phone and use 3rd party programs do remove that things.
Thanks!
#Edit
Also, the PDA from deodex rom has 431mb and the PDA of nondeodex has 185mb (same version of rom), is it normal?
Isnaiter said:
Also, do I really need to flash CSC? This part comes with a lot of trash apps that is impossible to remove by normal ways, and I don't want to root the phone and use 3rd party programs do remove that things.
#Edit
Also, the PDA from deodex rom has 431mb and the PDA of nondeodex has 185mb (same version of rom), is it normal?
Click to expand...
Click to collapse
Yes you need your CSC as i have explained it in details ,,,and you have too get root privileges for any removal of your system apk's ( If you are under some sort of warranty , you can use UN-root script or galaxy toolbox to reset the counter to zero for avoiding detection i guess,after you have done playing around with phone ,, rooting and using either manual or script method is recommended for bloatware removals on Odex roms , third party apps like disable service and TB is also advised ). Or Deodexed your Rom and remove bloatwares , but you will loose ~70 MB of your precious internal storage ( link2sd or Universal Cronmod could fix the storage problems ) and PDA size you did mention is quite natural .
Still waiting for your final report mate ,,,,,,,
Hello everyone,
Iam Claudio, iam new in this forum, and i need a looooot of help from the Android master.
In first place, I must apologize for my english, is bad, i know, but i try to explain the best i can.
Ok, here is the thing: I have my S5830, and i have problem with that, because the phone show me always "only emergency calls", and i cant make calls or send sms, etc. I inspect my SIM card, and in any other phone work very well, so the problem is in my device; so, reading a lot of information, i undertood that the CSC in my phone is incorrect. Well, maybe that is the problem, because recently back i flash the phone and "unbricked", following the next instrcutions:
http://forum.xda-developers.com/showthread.php?p=30731157#post30731157
So, the phone was unbkicked bery well, but i use the "Open Australia" firmware that quoted there. Everything looked good until the phone show me "only emergency calls". Ok, so only that i need is change the firmware for my FW country, and here is an another problem: i dont know if is the "i" version or another version, ¿why? because actually i have the "i" firmware version on my device, but iam from Chile, and the only firmwares for my country (according SamMobile) are "C" and "L" versions. I downloaded both versions, and i try to install that, but Odin(4.1X) doesn't recognize the phone, only is recognized when i use modified Odin for "i" devices. so ¿any suggestion for that? What I can do to fix this?
Now, i have other problem: When i try to install CWM Recovery 5.0.X.X, i can access to the recovery, but when i reboot the device, it come back to factory recovery, so ¿why the CWM Recovery is temporaly?
Finally, i trying to expand my "phone memory" using my card, for LINK2SD application, but i can't, because the device can not be mounted. I used EXT2, EXT3, EXT4 (always 512MB) primary partition and FAT32 primary partition, but doens't work; What I can do to fix this?
I hope you can help me . I dont know what else to do to resolve this. Stay tuned to your comments. Of course, thank you very much .
Regards
[email protected] , Just reported your post to be removed to help section for proper troubleshooting process ( General section is dedicated to walk through/Tutorials/Mods/etc etc ) .
Topic will be transferred there in 2 days by mods , so don't be surprised mate .
Before I start troubleshooting , remove your battery and see your model number registered there .
Study this topic i assisted while ago for more information regarding 3g and similar situation , before i continue with rest of your concerns ,, lets focus on fixing your call for now mate .
For permanent CWM recovery console , you need to flash custom kernel comes with CWM embedded ( do not do such thing for your stock , just flash temp CWM every time from your stock e3 for technical reasons for now ).
I will address all of your concerns eventually,,,,,,,
Now, No 3G in the phone
ehsanotaku said:
[email protected] , Just reported your post to be removed to help section for proper troubleshooting process ( General section is dedicated to walk through/Tutorials/Mods/etc etc ) .
Topic will be transferred there in 2 days by mods , so don't be surprised mate .
Before I start troubleshooting , remove your battery and see your model number registered there .
Study this topic i assisted while ago for more information regarding 3g and similar situation , before i continue with rest of your concerns ,, lets focus on fixing your call for now mate .
For permanent CWM recovery console , you need to flash custom kernel comes with CWM embedded ( do not do such thing for your stock , just flash temp CWM every time from your stock e3 for technical reasons for now ).
I will address all of your concerns eventually,,,,,,,
Click to expand...
Click to collapse
Thanks @ehsanotaku for your help and thnaks for answer so fast!
Ok, i followed your instructions, and now i can see my net!!!!!! yuuupiiiii!!! But, Not everything is so perfect, because i dont have 3G network. I removed the battery and i see the model number registered there, and that is "M" model, but i have installed the "i" version on the device, so, maybe, that could be the problem (i saw in SamMobile, and M version is just for Chile).
I dont know if i change the FW version, could be lost the IMEI, Baseband, or another kind of data, so, in first place, i need to backup the nandroid, efs and all the important data, but i don't know how to do that in this cellphone.
Could you guide me a little more, and help me on this , please?
I will be attentive to your comments. Of course, thank you very much .
Regards
@skullsleep; before we proceed with more instructions , tell me which part did you act on it and what do you mean you can see your net ? what do you see when you dial "*#06#" without quote into your dialer ( 15 digits IMEI number box is appeared or it was wiped out ) ?
what is your SIM card carrier/operator of M model from Chile ?
i variation from Open Australia Un- bricked your device , but your CSC ( your APN settings of your carrier ) and Modem ( base band ) was altered . Therefore you lost the ability of making contact/call / SMS/3g through your operator so far .