Pls help me to relock my bootloader on my x10, ive tried to unlock in some thread but I did a mistake, my signal bar is missing that openline for sim lost, technician repaired my phone to go back in open line sim, and flash it to stock 2.1-update1 x10a, build nr 2.1.1.A.0.6, baseband v 2.1.55, and kernel version 2.6.29 [email protected] #1 and now i cant flash to other firmware and it is to badly for not costumizable and rooting
my previous firmware is 2.3.9 feralab final..
i am newbie for an android phone and lack of knowledge..
im sorry for my english
FredCord said:
Pls help me to relock my bootloader on my x10, ive tried to unlock in some thread but I did a mistake, my signal bar is missing that openline for sim lost, technician repaired my phone to go back in open line sim, and flash it to stock 2.1-update1 x10a, build nr 2.1.1.A.0.6, baseband v 2.1.55, and kernel version 2.6.29 [email protected] #1 and now i cant flash to other firmware and it is to badly for not costumizable and rooting
my previous firmware is 2.3.9 feralab final..
i am newbie for an android phone and lack of knowledge..
im sorry for my english
Click to expand...
Click to collapse
This did not happen using my tutorial did it? anyway you could go and root and install custom roms when your done:
http://forum.xda-developers.com/showthread.php?t=1821750
i also encoutered that... before you proceed on any process make sure you disable your AV because some av detected the extracted file of flashtool as a virus and deleted some part of it and after flashing you will xperience some bug
bk1on1 said:
i also encoutered that... before you proceed on any process make sure you disable your AV because some av detected the extracted file of flashtool as a virus and deleted some part of it and after flashing you will xperience some bug
Click to expand...
Click to collapse
Mam/sir thank you for your help! Ive got a clue for me for your response I'd tried to install drivers in my flash tool 0.6.7.0 and i got it! now, can I have to make my phon into ICS? I am not sure if I got unlocked my bootloader sucsecful after my phone got a soft brick before
Related
i was trying to installe android 2.3.5 but i found its post the i cant unless i have
Only 2.1.1.A.0.6 or 2.1.1.C.0.0 SE firmware is that the orignal Rom the device came with ?
If you go into 'settings' then 'about phone' you will see the phones baseband version. If it ends in 15 it is most likely one of the two firmwares you mention. If you try to install a rom dependant on these firmwares and you don't have it you will temporarily brick your phone. (Requiring the use of the Sony Ericcson Update Service to hopefully restore the phone to working order).
It is possible your phone has the firmware already installed but you need to check! Some network providers have been very slow at releasing them. If you manage to find the firmware on the web (make sure it is the correct language and layout for your locale - AND the correct phone) then you need to use a flashing utility to install it, I use 'flashtool' as it can root the phone and install xrecovery, but you must be sure you read the documentation and follow the proceedure.
Once you have xrecovery and the phone is rooted the magic can begin..
Be careful. Its very easy to render your phone bricked (as in the phone is as useful as a brick!). No one here can take responsibility for the advice given or your actions.
Sent from my U20i using Tapatalk
my phone android version 2.2.1
baseband version M76XX-TSNCJOLYM-53404015
KERNAL VERSION 2.6.29 [email protected]#1
MOD VERSION FROYO MINICM/CMV6 HYBRID BY SLADE87 AND OWAIN 94
BUILD NUMBER V5.01 FINAL RELEASE
SO CAN I INSTALL SONYBREAD WHICH requires 2.1.1.A.0.6 or 2.1.1.C.0.0 SE firmware
so do i have it????
Not anymore, but if you do Factory reset, yes you have
no it will not cuz the factory ROM is not exsist
In my understanding the firmware doesn't change when you install a custom rom and (to me) they are two different entities. So yes, in my view you should be able to flash sonybread but I haven't used it myself but I have other gingerbread ports without a problem
Once your on the correct baseband you can change between roms without having to flash via the pc/flashtool.
If you get into bootloops then you can try restoring an xrecovery/cwm recovery or failing that reflashing with seus/flashtool.
Sent from my U20i using Tapatalk
I'm trying to up my firmware to GingerDX (follow guide of stelios97), but he wrote
You must have se new firmware 2.1.1.A.0.6 or 2.1.1.C.0.0 to flash this ROM!
Click to expand...
Click to collapse
I dont know how to know exactly which my firmware is. In "about phone" only write "Firmware version 2.1-update 1"
I searched in 4rum and read that if my baseband version ends in 15, my firmware is one of these two firmwares. But my baseband version ends in 06, does it mean my firmware is not 2.1.1.A.0.6 or 2.1.1.C.0.0? So how can I know exactly what is it?
These my phone's info:
Model number: E10i
Firmware version: 2.1-update 1
Baseband version: M76XX-TSNCJOLYM-53404006
Kernel version: 2.6.29 [email protected]#1
Build number: 2.0.A.0.504
Click to expand...
Click to collapse
One more question:
How can I know my Kernel is nAa 08 Kernel or what Kernel (I dont know what 2.6.29 [email protected]#1 means)? In stelios97's guide wrote that I have to flash nAa 08 Kernel.
yuduy said:
I'm trying to up my firmware to GingerDX (follow guide of stelios97), but he wrote
I dont know how to know exactly which my firmware is. In "about phone" only write "Firmware version 2.1-update 1"
I searched in 4rum and read that if my baseband version ends in 15, my firmware is one of these two firmwares. But my baseband version ends in 06, does it mean my firmware is not 2.1.1.A.0.6 or 2.1.1.C.0.0? So how can I know exactly what is it?
These my phone's info:
One more question:
How can I know my Kernel is nAa 08 Kernel or what Kernel (I dont know what 2.6.29 [email protected]#1 means)? In stelios97's guide wrote that I have to flash nAa 08 Kernel.
Click to expand...
Click to collapse
the firmware is your build number, so you need to update it to proceed. The baseband is correct (ends in 06). If you are in stock rom, your kernel is stock too (to flash a new kernel there are other steps to do before). I hope this get useful for you, and as an advice, read a lot about android!
blackkzero said:
the firmware is your build number, so you need to update it to proceed. The baseband is correct (ends in 06). If you are in stock rom, your kernel is stock too (to flash a new kernel there are other steps to do before). I hope this get useful for you, and as an advice, read a lot about android!
Click to expand...
Click to collapse
Thx for replying
But my build number is 2.0.A.0.504, so my current firmware is 2.0 or 2.1?
And now If I want to update to 2.1.1.A.0.6 by SE update service, I have to relock Bootloader right? (I just Root, xRecovery and unlock Bootloader yesterday). But I read in [Guide] Bootloader and kernel guide | X8 | W8 | X10 mini | X10 mini pro of SpyderX that
If you relock your bootloader while using a custom kernel your phone will be bricked!
Click to expand...
Click to collapse
So what I have to do to relock Bootloader safely? Flash another Kernel (like nAa 08 Kernel) before relock Bootloader?
yuduy said:
Thx for replying
But my build number is 2.0.A.0.504, so my current firmware is 2.0 or 2.1?
And now If I want to update to 2.1.1.A.0.6 by SE update service, I have to relock Bootloader right? (I just Root, xRecovery and unlock Bootloader yesterday). But I read in [Guide] Bootloader and kernel guide | X8 | W8 | X10 mini | X10 mini pro of SpyderX that
So what I have to do to relock Bootloader safely? Flash another Kernel (like nAa 08 Kernel) before relock Bootloader?
Click to expand...
Click to collapse
You read it in a wrong way xD
Well, to relock your bootloader again, your kernel MUST be in stock, otherwise it will be bricked (it says so, I don't even mind to try it)...
To conclude, if you want to relock your bootloader again after having your stock kernel replaced with another kernel, use flashtool to replace your current kernel to the stock one, or just reflash it using SEUS to make sure. After that, you can relock your bootloader again
Hope that helps
yuduy said:
Thx for replying
But my build number is 2.0.A.0.504, so my current firmware is 2.0 or 2.1?
And now If I want to update to 2.1.1.A.0.6 by SE update service, I have to relock Bootloader right? (I just Root, xRecovery and unlock Bootloader yesterday). But I read in [Guide] Bootloader and kernel guide | X8 | W8 | X10 mini | X10 mini pro of SpyderX that
So what I have to do to relock Bootloader safely? Flash another Kernel (like nAa 08 Kernel) before relock Bootloader?
Click to expand...
Click to collapse
your current firmware is 2.1. If you want to start all over again, you can simply go to the support zone in sony ericsson pc companion, in the update firmware section and "repair" (loosing all your data), and probably you will get the latest update available for our minis. And other option is mentioned by StardustGeass
I didnt use PC Companion (feared be bricked cause I unlocked BL already), I used flashtool to up my firmware to 2.1.1.A.0.6 successfully. In fact that I palpitated abit when flashing, but finally it was ok, my mini now is 2.1.1.A.0.6, all Root, xRecovery are removed and Bootloader is relocked now.
Now I have to start again to up FW to 2.3.7: root, xRecovery, unlock BL again, then flash nAa 08 Kernel be4 intall GingerDX from SD card
Thx for helping
This is my first post: Hi to everyone.
My mini is exactly the same than yuduy, except that mine is E10a. I have not modified anything yet, but I want to use the stelios97 Gingerbread ROM. Here in Mexico, according to PC Companion I am completely updated. So the questions are:
1.- What is the best way to update the firmware to meet the requiered buit number?
2.- How do I know if the phone will continue to work in the Mexican phone company TELCEL if I use a new ROM etc?
Thank you
Hi All (experienced developers),
Currently I am using Xperia NEO(MT15i) with unlocked bootloader.
I want to root my phone without falling into any issues like 0% battery. Once I had already experienced the 0% battery issue with another phone of my same model. (while flashing different ROMs for rooting purpose)
This time I want to use very safe method, these are my phone details:
Android version: 2.3.4
Kernel Version: 2.6.32.9.9-perf ([email protected] #1)
Build Number: 4.0.2.A.0.62
Please let me know if you need any more information.
Thanks and Regards,
Bhanu Chaitanya
Bangalore
India
+91-99 1690 7222
go take look in my sig how to get rooted 62 mate, but 1 advice, first search then post a new thread !
Edit: sorry i saw that you have unlocked bl, my rooting proces in my sig is for locked bl
chbw900 said:
Hi All (experienced developers),
Currently I am using Xperia NEO(MT15i) with unlocked bootloader.
I want to root my phone without falling into any issues like 0% battery. Once I had already experienced the 0% battery issue with another phone of my same model. (while flashing different ROMs for rooting purpose)
This time I want to use very safe method, these are my phone details:
Android version: 2.3.4
Kernel Version: 2.6.32.9.9-perf ([email protected] #1)
Build Number: 4.0.2.A.0.62
Please let me know if you need any more information.
Thanks and Regards,
Bhanu Chaitanya
Bangalore
India
Click to expand...
Click to collapse
Use the search button and u will get ur answer
dhwanik said:
Use the search button and u will get ur answer
Click to expand...
Click to collapse
take a look here, not hard to find :
http://forum.xda-developers.com/showthread.php?p=23597892#post23597892
Simple and quickest way is to flash rootxperia.zip in clockworkmodrecovery, works on every possible firmware, 2.2 to 4.0.3.
http://forum.xda-developers.com/attachment.php?attachmentid=635789&d=1308938498
Hi, recently I got a X10 from my brother. Now I'm trying to find out how to move from my stock firmware to a custom mod firmware.
I've gone thru the forum, and have rooted my phone. Now what is the next step to be done. Mine is a x10a running on 2.3.3 Build 3.0.1.G.0.75 , kernel 2.6.29-00054-g5f01537
[email protected] #1
Do i have to unlock the bootloader, how to check if i'm having a unlocked boot loader. Sorry if I am reposting or being too noob.
vsvj said:
Hi, recently I got a X10 from my brother. Now I'm trying to find out how to move from my stock firmware to a custom mod firmware.
I've gone thru the forum, and have rooted my phone. Now what is the next step to be done. Mine is a x10a running on 2.3.3 Build 3.0.1.G.0.75 , kernel 2.6.29-00054-g5f01537
[email protected] #1
Do i have to unlock the bootloader, how to check if i'm having a unlocked boot loader. Sorry if I am reposting or being too noob.
Click to expand...
Click to collapse
Yes, many of the ROM's require unlocked bootloader. I can't remember how to check it . If You don't want to do that just find a ROM that doesn't require an unlocked bootlader.
All files that are neded for unlocking bootlader are here.
vsvj said:
Hi, recently I got a X10 from my brother. Now I'm trying to find out how to move from my stock firmware to a custom mod firmware.
I've gone thru the forum, and have rooted my phone. Now what is the next step to be done. Mine is a x10a running on 2.3.3 Build 3.0.1.G.0.75 , kernel 2.6.29-00054-g5f01537
[email protected] #1
Do i have to unlock the bootloader, how to check if i'm having a unlocked boot loader. Sorry if I am reposting or being too noob.
Click to expand...
Click to collapse
I can tell you if it's unlocked or not.
Use this (http://forum.xda-developers.com/showthread.php?p=17375673) tool to identify your phone, and post the log here.
Regards,
I tried to root my xperia mini pro, but I failed. I installed over flastool a kernal,system(I do not know exactly what) and now I can not do Officinal update. How can I solve this?
Device, firmware, bootloader status, rom....How is someone suppoosed to help without knowing the basics? And how can you say "I flashed something, i don't know exactly what)...??
Ohh, i'm sorry..
Device: Sony Ericsson xperia mini pro (sk17i)
Android version:4.0.4
Software number: 4.1.b.431
Kernal: 2.6.32.9-pref [email protected] #1
I've just flash stock rom from site(http: //uploaded.net/folder/6fy4l8). And when I tried to install the update that offered me the phone, I could not. How do I solve this problem? Thanks in advance.
what is your current bootloader status. is it locked or unlocked? if you unlocked your bootloader and try to update your phone with seus of pc companion, u will end up soft bricking your device. the only option to update your phone is through flashtool
bro see you can root from here : - http://www.youtube.com/watch?v=2FxgZ7vkRLY
Thanks guys,i success to root my sk17i and now i'm using CM10 fxp... Phone is working better than official Sony rom.