My Touchpad gets stuck with the CM Logo. How can I reinstall everything?
what exactly did you do? power + home button should hard reset your device. provided you placed the moboot.zip file in the folder you should be able to boot in to webos and redo your acmeinstaller, or doctor your tablet.
did you follow the steps for using acmeinstaller? were you trying to use clockwork mod to flash an update? how long was it on the loading screen before you declared it looped?
mister timely said:
what exactly did you do? power + home button should hard reset your device. provided you placed the moboot.zip file in the folder you should be able to boot in to webos and redo your acmeinstaller, or doctor your tablet.
did you follow the steps for using acmeinstaller? were you trying to use clockwork mod to flash an update? how long was it on the loading screen before you declared it looped?
Click to expand...
Click to collapse
After about 5mins on the CM logo screen on 5 occasions I declared it looped.
I used Acmeinstaller to install the original alpha, then I used CWM to install the alpha2.1.
I think it went into the loop after upgradeing to 2.1 then booting into webos once.
When I go into CWM I cant access the .zip files in the cwrecovery folder
If you can get back in to recovery, reflash, and still have the issue then I would boot in to webos recovery and, using acmeuninstaller, remove cyanogenmod.
From there doctor your touchpad using the webos version of your choice. (newest is 3.0.4)
Re-enable developer mode on webos and set up to install alpha 2 using acmeinstaller.
Webos recovery mode again, then acmeinstall that bad boy. (along with gapps, cwm, and moboot).
I have installed on a handful of devices with no glitch. I didnt use CWM to install two point one, I just did the same procedure with acmeinstaller with the updated version.
This happened to my mom's tp and my own. I read somewhere that powering off would fix it and it worked for both touchpads
Sent from my HTC Eva 4G using Tapatalk
mister timely said:
If you can get back in to recovery, reflash, and still have the issue then I would boot in to webos recovery and, using acmeuninstaller, remove cyanogenmod.
From there doctor your touchpad using the webos version of your choice. (newest is 3.0.4)
Re-enable developer mode on webos and set up to install alpha 2 using acmeinstaller.
Webos recovery mode again, then acmeinstall that bad boy. (along with gapps, cwm, and moboot).
Click to expand...
Click to collapse
Did this and it worked like a charm. Thanks
I created this thread because I have looked all over and have been unable to find someone with the exact same issue(s).
I said "sort of" in the title because twrp is working. Ok, so before everyone asks if I have nvflash, the answer is no. I did not have the right version of firmware, and did not try to install it originally. Since I was able to install roms, I figured I was fine...oops.
Twrp is not properly installing roms. More on that later. I am getting to the asus splash screen that says my device is unlocked, but it is stuck there.
My last working rom was the deodexed stock JB rom from craig gomez. I installed it with goo and when I installed that, I lost custom recovery and root, so I decided to go back to a more custom rom so Titanium backup would work. When I did that, I tried also tried again to make nvflash work. I got through the first step, it said it was successful, except I never got the little message in the upper left corner that I was supposed to get. I did not think it was a big deal because my prime would still boot like normal.
Then I installed twrp 2.3.1.0 and I have tried flashing previous restore images. I have tried installing the roms on my sdcard. I cannot get past the asus splash screen.
If I try installing a rom with the force md5 check enabled, it does detect an md5 and then quits.
If I try intalling a rom without the force md5 check, i get an error that says E:Unable to mount '/staging'
When I try installing a backup everything seems to work okay, but then I get the same error E:Unable to mount '/staging'
When I try to install roms through fastboot, I get the following errors:
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
When I try using adb, I do not see any devices.
I tried putting CWM on the prime to see if I could install from that instead, but it would not load after install.
I tried putting an older version of twrp on the prime, to see if that was the issue because I used to have an older version...I could not get that to load either...so I went back to this version.
Any ideas or suggestions would be awesome guys. I am stuck.
I even went to install the naked drivers again, and when I try to flash a different recovery, I get the <waiting for device> text that never goes away.
i'm sort of on the same boat. my prime just keeps booting into twrp recovery no matter what i tried. i'm still hoping to find a solution to this problem.
godlyitem said:
i'm sort of on the same boat. my prime just keeps booting into twrp recovery no matter what i tried. i'm still hoping to find a solution to this problem.
Click to expand...
Click to collapse
For me, I can let it try to boot normally, but I get stuck at the splash screen. This device is unlocked.
If I hold down the volume down button, I can go to fastboot, or RCK for recovery...but it does not work properly.
big time noob said:
For me, I can let it try to boot normally, but I get stuck at the splash screen. This device is unlocked.
If I hold down the volume down button, I can go to fastboot, or RCK for recovery...but it does not work properly.
Click to expand...
Click to collapse
i just tried to flash cwm in the terminal, it wrote stuff on the memory, but didn't seem to do anything. it booted straight back to twrp. i can't even get it to go to fastboot!!! only if i can go to fastboot, i could save my prime!!!
godlyitem said:
i just tried to flash cwm in the terminal, it wrote stuff on the memory, but didn't seem to do anything. it booted straight back to twrp. i can't even get it to go to fastboot!!! only if i can go to fastboot, i could save my prime!!!
Click to expand...
Click to collapse
Yeah, I thought that too, but fastboot does not work properly either...argh. I wish one of the gurus would chime in here.
Same Here.. It all happened when i restored my files using titanium backup and when i rebooted im stuck at boot scrren
EDIT: Guys I did a prime fullwipe and flashed stock jb and now prime is restored to its original state..
""I also got some errors like md5 file could not be found and could not find the /staging""..but after the reboot it works perfect
EDIT 1: Now after the prime fullwipe and flashing stock jb i flashed twrp recovery and now it works perfect without a single error even the above mentioned errors were gone
mercydia said:
Same Here.. It all happened when i restored my files using titanium backup and when i rebooted im stuck at boot scrren
Click to expand...
Click to collapse
EVERYONE i fixed it!!!!!!!!!!!!!!!!!! !!!! it's alive again!!!!!!!!!!!!!!!!!
godlyitem said:
EVERYONE i fixed it!!!!!!!!!!!!!!!!!! !!!! it's alive again!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
That doesn't really help us. If possible, can you edit/delete your message so that the guys that might help do actually help? Don't want them to think this is done.
Can you clarify what the Prime fullwipe is and how you got there?
I do not know if it will help me.
I can't even do the wipe command from fastboot.
Just says <waiting for device>
I have tried the wipe command form the boot screen (the one with fastboot and RCK as options), that did not work properly either.
Ryan
mercydia said:
Same Here.. It all happened when i restored my files using titanium backup and when i rebooted im stuck at boot scrren
EDIT: Guys I did a prime fullwipe and flashed stock jb and now prime is restored to its original state..
""I also got some errors like md5 file could not be found and could not find the /staging""..but after the reboot it works perfect
EDIT 1: Now after the prime fullwipe and flashing stock jb i flashed twrp recovery and now it works perfect without a single error even the above mentioned errors were gone
Click to expand...
Click to collapse
big time noob said:
Can you clarify what the Prime fullwipe is and how you got there?
I do not know if it will help me.
I can't even do the wipe command from fastboot.
Just says <waiting for device>
I have tried the wipe command form the boot screen (the one with fastboot and RCK as options), that did not work properly either.
Ryan
Click to expand...
Click to collapse
here is what i did. get into twrp recovery. flashed full prime wipe -> right after that flash the stock jb US version directly dled from Asus -> reboot then you will be stuck at the splash screen (that's a good news). Hold down power + volume down until your prime turns off and restart (keep holding those two keys) until the 3 icons appear then flash w/e rom you want in recovery. It's alive!
In twrp I do not see anything that says Full Prime Wipe. I see something that says wipe. Are those the same? I tried doing a wipe from this screen, but it did not work for me as expected.
godlyitem said:
here is what i did. get into twrp recovery. flashed full prime wipe -> right after that flash the stock jb US version directly dled from Asus -> reboot then you will be stuck at the splash screen (that's a good news). Hold down power + volume down until your prime turns off and restart (keep holding those two keys) until the 3 icons appear then flash w/e rom you want in recovery. It's alive!
Click to expand...
Click to collapse
big time noob said:
In twrp I do not see anything that says Full Prime Wipe. I see something that says wipe. Are those the same? I tried doing a wipe from this screen, but it did not work for me as expected.
Click to expand...
Click to collapse
no full wipe is a stand alone zip file you have to google and find dl it. put it in your prime then flash it
Thanks. That is what I needed to know.
I will see if I can make this work when I get back from work.
godlyitem said:
no full wipe is a stand alone zip file you have to google and find dl it. put it in your prime then flash it
Click to expand...
Click to collapse
I am pretty sure I am F***ed.
I tried the prime full wipe. It worked the first time, I think. Then went to install a rom.
I had to do both through external SD in twrp because my adb is not working. Also, fastboot only works to install a recovery. The only version of any recovery I can make work is twrp 2.3.1.0
If I try an older version or CWM, it freezes where I try to go into recovery.
Unable to mount data error.
Unable to mount system error.
Same as before.
I tried using unbricker software I found, but since adb does not work properly, the software does not work properly.
I am going to see if I can work my charm and get them to take back my tablet at best buy for an infinity. I have read about other people pulling it off.
I think as we get closer to xmas my odds improve...UNLESS SOMEONE HAS ANOTHER IDEA??? I would love to try something else.
Eyeballer suggested a chat room channel thing, but most of the people are in europe and I would need to do it in the morning...I do not have time for that, but I may try it.
big time noob said:
Can you clarify what the Prime fullwipe is and how you got there?
I do not know if it will help me.
I can't even do the wipe command from fastboot.
Just says <waiting for device>
I have tried the wipe command form the boot screen (the one with fastboot and RCK as options), that did not work properly either.
Ryan
Click to expand...
Click to collapse
Download the zip:
http://goo.gl/hiFHB
Goto to Twrp recovery and install the zip..Since it supports microsd u can transfer the zip to microsd.
Goto TWRP -> INSTALL -> CHOOSE EXTERNAL SD -> INSTALL THE ZIP
It will completely wipe the internal storage and then download the official STOCK JB FROM ASUS SITE and follow the same steps to install. Now install the latest twrp recovery using fastboot
big time noob said:
I am pretty sure I am F***ed.
I tried the prime full wipe. It worked the first time, I think. Then went to install a rom.
I had to do both through external SD in twrp because my adb is not working. Also, fastboot only works to install a recovery. The only version of any recovery I can make work is twrp 2.3.1.0
If I try an older version or CWM, it freezes where I try to go into recovery.
Unable to mount data error.
Unable to mount system error.
Same as before.
I tried using unbricker software I found, but since adb does not work properly, the software does not work properly.
I am going to see if I can work my charm and get them to take back my tablet at best buy for an infinity. I have read about other people pulling it off.
I think as we get closer to xmas my odds improve...UNLESS SOMEONE HAS ANOTHER IDEA??? I would love to try something else.
Eyeballer suggested a chat room channel thing, but most of the people are in europe and I would need to do it in the morning...I do not have time for that, but I may try it.
Click to expand...
Click to collapse
When I was doing the fullwipe the same errors happened to me.. But dont mind..I got errors like
1. No md5 file found
2. Mount error
3. Cannot find /staging
Just follow the above the steps ull get it right
did you even follow my step by step guide? you can move the stock rom from external SD to your internal SD in advance -> file manager.
godlyitem said:
did you even follow my step by step guide? you can move the stock rom from external SD to your internal SD in advance -> file manager.
Click to expand...
Click to collapse
Yeah, I should have said I tried that first. I also tried the stock rom from asus. When that didn't work, I tried the stock rom deodexed I found in goo.
There are a bunch of permission errors going on inside my prime. When I go into the mount area, it will not let me mount the data to move it. Or, when I try to copy it over I get a failed message.
Okay. I wiped it again, from twrp.
Then it let me move the file from the ext-sdcard to the sdcard.
I used the prime full wipe.
Then I tried to install the stock rom by transferring it in twrp file manager.
I got the file onto the sdcard, but when i tried to install, it said Failed.
That was it.
I even tried installing the ICS version I got from ASUS. Same thing.
Now, I am going to try to access via unbricker...don't know if it will work, but I am out of ideas.
godlyitem said:
did you even follow my step by step guide? you can move the stock rom from external SD to your internal SD in advance -> file manager.
Click to expand...
Click to collapse
Fixed?
I am alive!
us-tf201-jro03c-10.4.2.15-stock-deodexed.zip
That is the last rom I successfully used.
I used all sorts of different wipes. I was in twrp and noticed my pc installing the transformer adb driver. So I hopped into adb to see if it would see my device with that driver. (it did, but it wasn't before from the fastboot or adb commands with naked driver).
I tried sideloading the above rom from twrp. It worked.
Thought others might want to know.
I do not know if I can install other roms or not. I am a little scared to try just yet.
big time noob said:
Okay. I wiped it again, from twrp.
Then it let me move the file from the ext-sdcard to the sdcard.
I used the prime full wipe.
Then I tried to install the stock rom by transferring it in twrp file manager.
I got the file onto the sdcard, but when i tried to install, it said Failed.
That was it.
I even tried installing the ICS version I got from ASUS. Same thing.
Now, I am going to try to access via unbricker...don't know if it will work, but I am out of ideas.
Click to expand...
Click to collapse
big time noob said:
I am alive!
us-tf201-jro03c-10.4.2.15-stock-deodexed.zip
That is the last rom I successfully used.
I used all sorts of different wipes. I was in twrp and noticed my pc installing the transformer adb driver. So I hopped into adb to see if it would see my device with that driver. (it did, but it wasn't before from the fastboot or adb commands with naked driver).
I tried sideloading the above rom from twrp. It worked.
Thought others might want to know.
I do not know if I can install other roms or not. I am a little scared to try just yet.
Click to expand...
Click to collapse
You will have the jelly bean bootloader now so as long as you stick to it you should be fine. The only other thing I would suggest is check you version of twrp, you should be running the jelly bean version of it also. And if I am not mistaken, you need to be on ics to use nvflash (although I haven't checked the op recently so I could be wrong) so definitely stay away from that unless you downgrade.
So my tablet won't get past the Asus start up screen, but I did manage to get CWM working, problem is that I have no roms on my internal SD, because I wiped everything trying to fix stuff with WSG Flasher (didn't work).
I've tried everything, but I'm at a total loss here. adb won't work, even after I installed that dreadful Asus PC Suite, WSG FLasher doesn't work because adb doesn't work and
Code:
fastboot -i 0x0b05 flash somerom.zip
doesn't work either.
I've tried installing dozens of roms and CWM versions through fastboot, but none worked. The only CWM image that did work was called "recover-jb.img" that I got from here, though it's kind of useless if I can't install any roms.
Any suggestions, or should I just throw my tablet out?
Pepe1Vo said:
So my tablet won't get past the Asus start up screen, but I did manage to get CWM working, problem is that I have no roms on my internal SD, because I wiped everything trying to fix stuff with WSG Flasher (didn't work).
I've tried everything, but I'm at a total loss here. adb won't work, even after I installed that dreadful Asus PC Suite, WSG FLasher doesn't work because adb doesn't work and
Code:
fastboot -i 0x0b05 flash somerom.zip
doesn't work either.
I've tried installing dozens of roms and CWM versions through fastboot, but none worked. The only CWM image that did work was called "recover-jb.img" that I got from here, though it's kind of useless if I can't install any roms.
Any suggestions, or should I just throw my tablet out?
Click to expand...
Click to collapse
what were you doing when you started having trouble? are you on jb or ics bootloader where is the nvida on your splash screen?
whycali said:
what were you doing when you started having trouble? are you on jb or ics bootloader where is the nvida on your splash screen?
Click to expand...
Click to collapse
I was trying to install CM10, initially installing any CM rom would fail because CWM would say "assert failed, model is not tf201" (It is most certainly a transformer prime, I checked double checked) I edited the updater-script file in the .zip to skip the model check, after that installing the rom went just fine, it would just hang indefinitely on the splash screen.
The tablet is on the jb bootloader, the nvidia logo is in the bottom right corner.
Pepe1Vo said:
I was trying to install CM10, initially installing any CM rom would fail because CWM would say "assert failed, model is not tf201" (It is most certainly a transformer prime, I checked double checked) I edited the updater-script file in the .zip to skip the model check, after that installing the rom went just fine, it would just hang indefinitely on the splash screen.
The tablet is on the jb bootloader, the nvidia logo is in the bottom right corner.
Click to expand...
Click to collapse
let me get this straight. you can figure out how to change the updater.script but you insist on using cwm? Fastboot twrp to your prime and install a rom zip from your microsd.
whycali said:
let me get this straight. you can figure out how to change the updater.script but you insist on using cwm? Fastboot twrp to your prime and install a rom zip from your microsd.
Click to expand...
Click to collapse
Err, I didn't even know there was an alternative to cwm... At any rate, will twrp allow me to transfer files? My microsd is empty due a hardwipe I did.
Yes. TWRP Allows you to also flash zips from micro sd . Altrough I'm not sure can you install it from the situation you're in.
Sent from my GT-I9100 using xda app-developers app
Pepe1Vo said:
Err, I didn't even know there was an alternative to cwm... At any rate, will twrp allow me to transfer files? My microsd is empty due a hardwipe I did.
Click to expand...
Click to collapse
first you need the drivers for fastboot installed to your pc. you can accomplish this by following the advice given here.
http://forum.xda-developers.com/showpost.php?p=34477256&postcount=5703
Next you need a working twrp which will help you install a rom from your external microsd card. get that here. and follow his install istructions.
http://forum.xda-developers.com/showpost.php?p=34359560&postcount=5497
then I recommend grabbing this rom to install from your microsd using twrp.
AndroWook Prime Hairy Bean v1.4
www.gamerzxtreme.com/AndroWook_Hairy_Bean_v1.4_FINAL_1.zip
you should only need to follow these instructions from there.
Download AndroWook Prime Hairy Bean v1.4 from one of the links above and copy to either root of internal SD or micro SD.
Boot into recovery (TWRP) and wipe cache, dalvik cache and factory reset. You can wipe system as well if you want a total deep clean but do so at your own risk.
Select to install ROM from SD and follow on screen prompts.
When install completed allow 30-60 mins for the system to cache itself upon which time you should now have a nice smooth TP.
Enjoy!
I just rooted my Nook Tablet.
After rooting it I made the mistake of installing cm10.1.2 without wiping first. My first issue was that it stuck on the cm loading gif. I figured out I could get into recovery by holding the power and home button and do a factory reset which let me boot up fully, but it had a weird screen glitch right before the cm loading gif.
So, now I have all my problems. I want to make whatever I did clean so I don't have any issues come up in the future. First of all I can't get Google Apps set up. None of the APKs work for it. To counter this I tried to get Rom Manager installed directly from the CW website but within Rom Manager it tells me I need the latest version in order to download any roms.
To make things worse I cannot seem to get into recovery mode. Every time I try to boot into recovery mode I get the screen that says I need to reboot my tablet and if the problem persists I need to contact B&N support.
What I'd like to do is somehow get ROM Manager working and install a fresh version of CM with a data/cache wipe and then I feel like it would work but if anybody knows a better way to do it or what please let me know.
See http://forum.xda-developers.com/showpost.php?p=43326042&postcount=123 for pointers on how to flash CM10 internally on emmc.
If you prefer to stick with pure CM10.1.2, just use its ROM zip file in step 2(c) but in which case you'll also need to flash CWM recovery separately (e.g., flashing flashable_CWM_6.0.2.x.zip from http://goo.im/devs/succulent/acclaim/recovery).
Thanks for the link. I followed his steps as close as i could and everything seems to be working flawlessly.
Hello. I'm kind of new to all of this. I have the android incredible 4g lte which WAS running the CM 10.1 mod but I recently wiped everything for the CM 11 mod. No, I didn't create a backup or restore. Yes, I feel incredibly stupid. Now I can't get the cm11 mod installed. It gives me an error that says "(Status 7)" in TWRP (v2.2.0). I've been doing a bit of reading and am having some trouble understanding what to do here.
Do I need to flash over the ClockworkMod recovery software using SDK tools and then flash over the recovery file from this post?
http://forum.xda-developers.com/showthread.php?t=2552150
Is the recovery needed to install CM11?
Do I need to be using the clockworkmod recovery software? I don't remember the steps that I took to get cm10.1 installed as it was a couple of years ago. I remember the process taking me a couple of hours.
I would very much so appreciate the help. Thanks
EDIT 1: I managed to install Clockwork manager and get rid of twrp and I "installed" the mod. Unfortunately, the mod doesn't load and now the HTC boot screen just hangs indefinitely. My computer is recognizing the device but mounting the sdcard isn't showing anything on my computer which is a pretty big problem as I need that in order to at least go back to the stock RUU. I can get back into the bootloader and recovery but am unsure what to do at this point. I am also having a difficult time ADB pushing anything to the /storage/sdcard1/ directory. I ran as admin and still no luck.
Also, phone is not s-off.
EDIT 2: CWM not mounting sdcard1. Trying newer version of TWRP
EDIT 2a: TWRP 2.7.0.0 gave me access to sdcard1 from PC again.
EDIT 2b: Tried different another CM11 download. Still hangs at HTC bootscreen.
EDIT 2c: SD card no longer is recognized through phone. Am using an SD adapter directly to computer to access and change files... Problem seems to be getting worse, the more I screw with it.
EDIT 2d: Switched to CWM Recovery v6.0.4.6. Install of rom took less than a minute. Am skeptical... And no dice. Could really use some help...
EDIT 3: At this point I tried the avatar rom and it stops at the HTC screen for around 45 seconds then continues on to a black screen with the menu button lit up. Not sure what's going on...
LAST AND FINAL EDIT: I'm a moron... I didn't flash the boot.img to the boot directory. Feel free to make fun of me in the comment boxes below!!!