I apologize up front for being so ignorant about this, but I want to make sure before I completely ruin a new phone.
In researching, there are a ton of people who are asking questions in regards to rooting their Chinese SIII, most wishing to flash a new ROM. So, most of the questions and discussions are a technical mix of both rooting and flashing, and I have become a little confused on something.
I have a new Chinese phone, but I actually live in China at the moment, and all I really want is to root the phone. Basically I wish to keep my phone exactly how it is, but to be able to remove some Chinese software and add in a few things that they are not pre-loading (like Google Play Store - which will not run on Chinese phones unless they are rooted). I DON'T want to end up losing my Chinese IME/Keyboard or other things.
My question is this: Rooting is obviously different than flashing, but when rooting, does the process simply "unlock" the OS, allowing you admin, or does it write over your OS with a new, admin version? (I hope that was clear). I've had some experience in flashing phones, but there never seems to be an exact match for what was on the phone prior to flashing - I don't want to root if there are any "slight" differences, other than allowing admin access.
I was looking at the link for the Samsung Galaxy SIII toolkit V5.0, and I believe that is what I need to use to root the phone (if there is a better/easier way, feel free to let me know).
I guess I will have to go to that thread to ask about un-rooting.
AP: I9300ZCBLH3
CP: I9300ZCLH3
CSC: I9300CHNBLH3
Root unlocks system admin as it where .
Unroot is flash stock firmware .
Easy root .
http://forum.xda-developers.com/showthread.php?t=1695238
Why not read the Chinese owners thread ,
jje
Rooting - Giving Superuser (admin) access.
Flashing - This can be anything from a full rom to a boot animation.
I'm pretty sure rooting keeps everything stock, unless you flash a rooted kernel. I believe it will install ClockworkMod recovery too, but perhaps someone with more experience can step in.
Sent from my Nexus 7
Related
Although I've flashed non-phone devices in the past (routers, PAP2, Ipod classic, etc.) This is the first time I'm going to be flashing a SmartPhone that I've ordered which I should be getting very soon.
I ordered a Samsung Galaxy S II and have been crawling the forum trying to learn all I can before I try rooting and unlocking my phone when I get it. But I'm having trouble deciding on a few things.
Hopefully my question can become a guide for other new people who are just starting off like me.
Rooting:
To begin, I'm trying to figure out what's best for rooting.
I've looked at a few different methods..
Chainfire's direct method: http://forum.xda-developers.com/showthread.php?t=1103399
lyriquidperfection's one-click method: http://forum.xda-developers.com/showthread.php?t=1125414
CLShortFuse's one-click method: http://forum.xda-developers.com/showthread.php?t=803682
LitePro's ROM and Root method all-in-one: http://forum.xda-developers.com/showthread.php?t=1095274
All of these have their own merits. But I'm trying to figure out the best approach for myself.
Although Lightn'ing (LitePro's) looks interesting and I may try that ROM later, for now I want to avoid changing the ROM till I know I like the phone. So I'm looking at the first three choices.
The one that I think I would be able to do easiest is either lyriquidperfection's or CLShortFuse's methods as they both are one-click solutions and I just need to grab the right kernels.
I don't know if there's any reason I would want to go with Chainfire's instead of the two previously mentioned. If there is please let me know.
I asked this question on the respective threads but as of posting haven't gotten an answer of if there's any reason to flash the original kernel back after rooting and if I keep root if I flash it back.
I also don't know much about the use of Jigs to avoid the flash counter going up. Is there any reason I need to worry about the flash counter going up? Is there a limit on number of flashes on a phone?
Unlocking:
For unlocking I looked at:
http://forum.xda-developers.com/showthread.php?t=1092451
However it seems for my specific phone (Virgin/Bell) we use this method as posted in the same thread:
http://forum.xda-developers.com/showthread.php?p=16482293#post16482293
This seems pretty much straight-forward. I just got to root the phone then get and run the app mentioned. Phone will crash/reboot and then no SIM lock.
If there's anything that seems wrong with this let me know please.
Other stuff:
At some stage here I want to be able to back up the stuff on the phone and get other typical tools.
I keep hearing about ClockWorkMod constantly and it seems to be a tool for backing up the phone data and making it easier to flash stuff in without use of ODIN.
I haven't found clear documentation on how I would do this on the SGII specifically.
I also here Titanium backup (sp?) is also a good idea to install at some point.
Is there other apps or otherwise I should be looking into before I start this journey into the wonderful world of hacked smartphones?
-This is a place marker for me making amendments so that later this may be more or less a guide for other beginners-
Dav_Edward said:
Although I've flashed non-phone devices in the past (routers, PAP2, Ipod classic, etc.) This is the first time I'm going to be flashing a SmartPhone that I've ordered which I should be getting very soon.
I ordered a Samsung Galaxy S II and have been crawling the forum trying to learn all I can before I try rooting and unlocking my phone when I get it. But I'm having trouble deciding on a few things.
Hopefully my question can become a guide for other new people who are just starting off like me.
Rooting:
To begin, I'm trying to figure out what's best for rooting.
I've looked at a few different methods..
Chainfire's direct method: http://forum.xda-developers.com/showthread.php?t=1103399
lyriquidperfection's one-click method: http://forum.xda-developers.com/showthread.php?t=1125414
CLShortFuse's one-click method: http://forum.xda-developers.com/showthread.php?t=803682
LitePro's ROM and Root method all-in-one: http://forum.xda-developers.com/showthread.php?t=1095274
All of these have their own merits. But I'm trying to figure out the best approach for myself.
Chainfires simplest method less problems for most .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
I also don't know much about the use of Jigs to avoid the flash counter going up. Is there any reason I need to worry about the flash counter going up? Is there a limit on number of flashes on a phone?
Zero as Samsung will invalidate warranty for custom roms or rooted phones .
Other stuff:
At some stage here I want to be able to back up the stuff on the phone and get other typical tools.
I keep hearing about ClockWorkMod constantly and it seems to be a tool for backing up the phone data and making it easier to flash stuff in without use of ODIN.
I haven't found clear documentation on how I would do this on the SGII specifically.
Their is no documentation its probably written up in the FAQ or Wip but is a relativity simple tool anyway .Backup restore phones rom install custom rom wipe data factory reset reset battery stats to zero .
FAQ
http://forum.xda-developers.com/showthread.php?t=1065995
Wip
http://forum.xda-developers.com/showthread.php?t=1125282
I also here Titanium backup (sp?) is also a good idea to install at some point.
On a rooted phone Titanium pro allows you to back up your apps and also to freeze apps .
jje
Click to expand...
Click to collapse
Thorough stuff, props to you sir - you know search so you'll get your first thanks...
I would advice you to go with Chainfire's method. It's the easiest and most versatile method IMO. Definitely the best for beginners because you keep your stock ROM yet still are rooted and get Clockwork Mod.
The installed CWM (Clockwork Mod) Manager app with Chainfire's work is an easy way to see what it does - basically you can backup and restore your whole system/device, plus flash custom ROM/kernels/themes etc. Look into the flashing part later - baby steps are good here!
Titanium Backup is an excellent backup app for backing up/restoring apps and data, as opposed to the whole system. Buy the Pro version, definitely worth it.
I also like My Backup (also on Market), excellent for backing up contacts/SMS/MMS. The free version is a 30 day trial.
Can't help with unlocking, never needed to - sure others can help.
Good luck
Edit - JJ beat me too it, hadn't seen his post. Must type faster...
@JJEgan & @B3311, thanks for the useful information.
I was going to try those one-click methods because I thought those were the more newbie friendly methods. Thanks for the information to try using Chainfire's instead.
I will try using Chainfire's method instead with your advice when I get the phone. Having the tools like his CWM hopefully will make things easier.
I am a bit concerned though about his mention that Rom Loader won't work with his version of the build. I'd still like the ability to use custom roms down the road once I learn how to properly back up the phone so I can experiment with various roms till I find the one I like most.
Any advice about using rom loader or other possible difficulties using Chainfire's kernel?
Dav_Edward said:
@JJEgan & @B3311, thanks for the useful information.
I was going to try those one-click methods because I thought those were the more newbie friendly methods. Thanks for the information to try using Chainfire's instead.
I will try using Chainfire's method instead with your advice when I get the phone. Having the tools like his CWM hopefully will make things easier.
I am a bit concerned though about his mention that Rom Loader won't work with his version of the build. I'd still like the ability to use custom roms down the road once I learn how to properly back up the phone so I can experiment with various roms till I find the one I like most.
Any advice about using rom loader or other possible difficulties using Chainfire's kernel?
Click to expand...
Click to collapse
Most just put custom rom on sd card and flash via CWM .
Sorry no nothing about Rom Loader .
jje
I would also advice using CF-Root. I was scared of rooting my phone, but after using CF-Root, I don’t know why I was so scared. The process took a little over 30 seconds (I need practice). To me at lease I think it’s the easiest method, you just need to make sure to download the right kernel.
EDIT:
Get a UBS jig, After rooting, I had the "yellow triangle" I turned off phone, removed battery, inserted jig, put back battery, entered download mode, restarted phone and no more "yellow triangle"
Hi All
I have a brand new SII from the Vodafone shop in Australia. I set it up at a basic level, WiFi etc and it offered me an OTA upgrade to 4.0.3 (it was on 2.something, sorry about the sketchy details but it's a bit irrelevant)
It now says is a 3.0.15-I9100TDULP9-CL422302. I want to root it, but I can't find a suitable image based on that firmware ID. Also, has Clockwork gone out of vogue/energy/business? I rooted my Xoom like that, no problems.
Without actually asking for explicit directions starting with how to tie shoelaces, the version thing has me paused, as does venturing into an unknown flashing tool (OK, unknown by me, lots of others use it, it seems very satifactorily.) I think my big mistake was letting the OTA happen.
Doing the OTA update wasn't necessarily a mistake. To root your phone, I recommend CFRoot. There are other methods, but CFRoot is simple & installs CWM/Recovery which makes backup/restore/flashing quick & easy.
Go to the CFRoot thread, read the first page carefully. Pay particular attention to the section that begins with 'Help ! Which file do I use ?' in bold red. All the info (and the kernel) you need is in this thread.
Also, for future reference, questions belong in Q&A.
Well it's regarding rooting.
I heard it opens up a world of opportunity with your smartphone, and some apps I really want are only available vain rooted phones. I have the Samsung galaxy s3 international version. It was originally from Australia if that matters at all. It is on 4.0.4. Anyways, being a noob to android more or less, and being a bit apprehensive (because I have no warranty and I cannot obtain another phone easily) I was wondering basically how risky it is to brick your phone in a) the process of rooting your phone. Is it common? If it does get bricked is it reversable by a restore or simply gone? Also after rooting, is there any upkeep or management I need to do to make sure my rooted phone does not screw up? And lastly. What is the safest and easiest way to root the international quad core gs3 on ics. Thank you to everyone for your time
mysticgorilla said:
Well it's regarding rooting.
I heard it opens up a world of opportunity with your smartphone, and some apps I really want are only available vain rooted phones. I have the Samsung galaxy s3 international version. It was originally from Australia if that matters at all. It is on 4.0.4. Anyways, being a noob to android more or less, and being a bit apprehensive (because I have no warranty and I cannot obtain another phone easily) I was wondering basically how risky it is to brick your phone in a) the process of rooting your phone. Is it common? If it does get bricked is it reversable by a restore or simply gone? Also after rooting, is there any upkeep or management I need to do to make sure my rooted phone does not screw up? And lastly. What is the safest and easiest way to root the international quad core gs3 on ics. Thank you to everyone for your time
Click to expand...
Click to collapse
Well, most you could pick up be reading a bit, everything is already explained around here but since i was in your shoes very recently:
- there's always a risk. You need to be aware of that. That said, most cases that actually go wrong it's usually user's fault who failed to follow instructions closely. So read them. And read some more. And then read again just to make sure. And then i'd read again.
I used this very recent method from chainfire (salute and donate to the man if you like and can, he deserves it) to root my 4.0.4 international GT-I9300 S3:
http://forum.xda-developers.com/showthread.php?t=1957273
Triangled away next and everything worked like a charm. This preserves everything as stock as possible just adding root to your phone.
- from what i can tell, as long as you don't do anything that messes with the bootloader, you can always recover from a procedure gone wrong. Just disconnect, remove battery, insert and try again. Rebooting the computer or changing usb ports usually helps too (on odin).
- after rooting successfully, the very first thing you should do is backup your /efs folder. This is easy, just pick up root explorer or some other file manager that allows exploring you root (/), go up in your folders until you get to / look for the efs folder and just copy it (NOT MOVE) elsewhere (sd card, external sd, your computer preferably, whatever, just have that safe). This will come in handy in case you lose your imei at some point. Just restore this folder's contents and you're good to go. If that happens and you don't have a backup, it's a f'ing pain you can do well without.
- anything else root related is just common sense. Since you have the potential to screw up your entire phone with root permissions (this is why you don't have them in the first place), if an app pops up asking for root permissions, be sure what it is before allowing. If you're not sure, you can always deny first and allow later in the superuser app.
- you can also look into backing up with nandroid. You can think of this as an image of your entire phone. With this you can restore your phone to the same state it was when you did it. Useful when something went wrong and your phone doesn't boot anymore or you just wanted to try new roms with the option of coming back to what you had before. Not sure how you do it on the S3 still, but it usually requires a modified recovery like CWM. The method to root above doesn't install one though, it preserves what you had. Check this instead if you're interested:
http://forum.xda-developers.com/showthread.php?t=1695238
Cheers dude, i'm sure everything will go well for you too.
Chance of a brick about .0001 % rising to 100% for those that are to lazy to read follow instructions .
BASICS
http://forum.xda-developers.com/showthread.php?t=1927113
jje
Thankyou very much to everyone who has read and replied to this. 3 more minor questions. Is there a way to first update my phone to jellybean 4.1 via Odin or something like that? Or is this possible after root, because I don't want to stay on ics. Also what exactly happens if I update while rooted. Does it wipe or unroot my phone or the like? Also should my phone be in use debugging, and lastly what does it mean to unlock my bootloaders? That was more than 3 questions sorry thanks again
mysticgorilla said:
Thankyou very much to everyone who has read and replied to this. 3 more minor questions. Is there a way to first update my phone to jellybean 4.1 via Odin or something like that? Or is this possible after root, because I don't want to stay on ics. Also what exactly happens if I update while rooted. Does it wipe or unroot my phone or the like? Also should my phone be in use debugging, and lastly what does it mean to unlock my bootloaders? That was more than 3 questions sorry thanks again
Click to expand...
Click to collapse
1) You don't need to root to update to JB.
Just download any ROM you want from http://samsung-updates.com/device/?id=GT-I9300 (I recommend the UK unbranded ROM, BTU) then use Odin3 to flash it to your devices. Search the forums for specific instructions on this procedure. I'll just tell that it takes no more than 2-3 minutes.
2) If you're going to root, I suggest you do it beforehand, by flashing a kernel like Siyah (in ICS), and then proceed to flashing the stock JB ROM, HOWEVER, instead of using Odin3, you will use MobileOdion (available from Play Store), because that way you'll have a fully rooted and stock device.
3) Using step 2 above, it will not wipe not unroot your phone. It is safe and retains all your settings. That is the beauty of MobileOdin. There is a free version.
If you root and THEN install via Odin (PC), then you'll lose root, but not your settings.
In either case, you only wipe the device IF YOU WANT TO.
So, the best option is to:
a) Install SiyahKernel using Odin3 (PC)
b) Download the JB BTU ROM from http://samsung-updates.com/device/?id=GT-I9300
c) Extract the .md5 from the ZIP file and move it to the device's ext. sd card
d) Install MobileOdin in the device
e) Use MobileOdin to flash the .md5 you moved to it in step (c)
f) install TriangleAway (download from XDA) and run it to reset binary counter (which got incremented in step [a] )
Results: rooted, JB, stock, all settins retained, no binary counter increment
Simonetti2011 I have been searching the internet here in New Zealand and that has been the best answer I have found so far!
I do have a slight question thought. I live in New Zealand and have the GT-I9300T model of the GS3 and I'm wanting to install the international unbranded rom for that I can get updates faster (here in NZ it takes months and months to get updates)
I downloaded the International UK unbranded firmware 4.0.4 and was going to flash that rom onto my phone then upgrade to jelly bean via kies but have since relised I should just download the jellybean UK firmware straight away. Do you by any chance havea link to the firmware that I would need, I noticed there were a few different versions.
Also about the CSC, would I need to do any changes?
Many many thanks in advance, Sorry for hijacking this thread, just figured I was on the same pages as the OP
prawln said:
Simonetti2011 I have been searching the internet here in New Zealand and that has been the best answer I have found so far!
I do have a slight question thought. I live in New Zealand and have the GT-I9300T model of the GS3 and I'm wanting to install the international unbranded rom for that I can get updates faster (here in NZ it takes months and months to get updates)
I downloaded the International UK unbranded firmware 4.0.4 and was going to flash that rom onto my phone then upgrade to jelly bean via kies but have since relised I should just download the jellybean UK firmware straight away. Do you by any chance havea link to the firmware that I would need, I noticed there were a few different versions.
Also about the CSC, would I need to do any changes?
Many many thanks in advance, Sorry for hijacking this thread, just figured I was on the same pages as the OP
Click to expand...
Click to collapse
Thanks!
The 9300T and the 9300 are NOT the same device, therefore they use different firmware (ROM). The ROMs for the 9300T are here: http://samsung-updates.com/device/?id=GT-I9300T
I don't think there is a 9300T ROM for the UK, since the model released there is the 9300 (non-T).
It seems that either Samsung-updates hasn't indexed any ROMs for your model or they haven't been released.
About CSC: just don't worry about it... download and flash any ROM you want for your specific model and don't worry. If you don't like it, just download and flash another one.
Thanks heaps for that!
I actually just tried the UK unbranded rom that was for the i9300 on my i9300T and suprisingly everything seems to work ok so far (phone calls, txting, 3g etc)
Thankyou to everyone!
Thank you for your responses to my post regarding rooting my s3. They were very helpful. i succesfully rooted via chainfire cf auto root for the I9300 model without problem. Just one last question, I have been searching around a bit and some people are saying that flashing the jellybean firmware via odin, is not a perfect copy.. i mean some say they have been experiencing very minor problems here and there. So, if i update to the uk firmware on jelly bean via odin or mobile odin, and i experience some problems, can i still get the official ota update or jellybean 4.1 via kies when it is released? Thanks again for your help. Im pretty new to this android stuff
I have to start by telling you I am not only a Newbe I am a NO-Knowbee, a complete novice. I am an advanced computer user but smart phones make me fell stupid. So please bear that in mind when offering "how to" advice.
I bought this phone 3 weeks ago as Rooted. I think is was rooted but SuperSU will not start. I get a message that the SU Binary need to be updated. I have two choices. NORMAL which fails and the other is TWRP/CWM which does nothing either but suggests I manually reboot into recovery manually. I have no idea what to do.
Nice mess there ... maybe others have better opinion here but .. the question would be to fine out what version of android you have (aka like windows xp, 7, 8/8.1 etc) then from that point I would almost want to start over ..
Some people have differ opinions on this but my opinion is to start over and re-root the phone. Either they failed on the unlocking boot loader or something and just decided to sell it. (in windows terms they basically corrupted everything).
So the question comes down to is being able to put on custom roms? Depending circumstances you can unlock the boot loader and then install any custom rom (modified OS made for that specific phone, you cant just put anything it has to be made for this phone etc..)
Next question if you can live without going through that (different roms) and want to stick with stock (whats already on the phone) and just want root, then the my opinion would be to just redo everything then re-root it fresh.
Theres a program called Odin that you would use and you would need the stock file to which is currently on your phone and you would need to download it (the file is usually about over a GB in size) and you would need to do that. However telling you how to do that here while its simple this is something you need to read and learn about. Its just like finding tweaks and tips on windows. There's a EXCELLENT help section here and I HIGHLY recommend you read and read more and more. Its like potato chips you cant eat just one. Good luck.
Hi Everyone,
Wanted to know if anyone has already figured out or through a different method, can help me root my phone.
It's an LG phone under GSM technology by TracFone for Walmart Straight Talk service. the Model is "LG l21g" or "lgl21g".
It is specifically running Android 5.0.1
I've learned it's better to follow a root process specifically made for the exact model of your phone. But since TracFones lack much in rooting fame, I'm hoping that there is a safe method used to provide basic root access to phones/devices that have the respective OS. For which in my case is version 5.0.1
I am new to rooting but not computers in general. I have searched for quite a while for a way to root my device by model. I've found nothing, and AndroidArea51 seemed to have a little success, but are not sharing a clear tutorial sadly. But I am skeptical about 1 click root apps and how they may tend root the device for a few months before unrooting automatically and then forcing the device owner to pay to root again. You know, the old regular malicious hijacking software you can't get rid of without a hard reset or what not.
I am also aware of locked bootloaders but am not sure of what it means for my request to root. Should i unlock mine if it is locked in order to root? Or is it unnecessary unless i want to flash a new rom onto my device? I've obviously read things online, but am still learning the relationships of all these things
I greatly appreciate all your time and help in anyway you can.
Thanks.
I used kingroot for a successful root on my LG destiny. Im hoping for recovery and roms soon but I don't know if any devs are intersted in our phone.
Failbringer60 said:
I used kingroot for a successful root on my LG destiny. Im hoping for recovery and roms soon but I don't know if any devs are intersted in our phone.
Click to expand...
Click to collapse
hey Failbringer60,
Hope your holidays were great and thanks for your comment. I am very skeptical of software such as kingroot and iroot and others of the same nature that are usually one-click root types. Though i'm not against using it if it's the only way to root less popular devices such as ours, i would rather have a little tutorial/guide on how to use the app/software to root the device then get rid of that app and its bloatware (and any other malicious ware that comes from it) and sustain a more honest or reliable superuser app/access to more precisely control the permissions that apps from the app store demand before download and use.
I have seen in other forums where users find that these one-click root apps aren't so trustworthy after a few months, and the device doesn't adhere to them as it did before. It's these kinds of things that sort of scare me. but if you are aware of a way to use these apps to gain root access and then a way to get rid of them while keeping root on my device safely, I would be more than glad to learn.
I am very new to rooting android devices since i've never done it before. and am trying to use my knowlegde from some PC maintenince to understand these things. so i hope that you can excuse me for not fully understand some things. But i am open to any help that can be spared.
Thanks in advance
hi
try kingroot on playmarket it worked in my tablert, only takes some minutes if you are lucky
Thanks.
thewildnative said:
hey Failbringer60,
Hope your holidays were great and thanks for your comment. I am very skeptical of software such as kingroot and iroot and others of the same nature that are usually one-click root types. Though i'm not against using it if it's the only way to root less popular devices such as ours, i would rather have a little tutorial/guide on how to use the app/software to root the device then get rid of that app and its bloatware (and any other malicious ware that comes from it) and sustain a more honest or reliable superuser app/access to more precisely control the permissions that apps from the app store demand before download and use.
I have seen in other forums where users find that these one-click root apps aren't so trustworthy after a few months, and the device doesn't adhere to them as it did before. It's these kinds of things that sort of scare me. but if you are aware of a way to use these apps to gain root access and then a way to get rid of them while keeping root on my device safely, I would be more than glad to learn.
I am very new to rooting android devices since i've never done it before. and am trying to use my knowlegde from some PC maintenince to understand these things. so i hope that you can excuse me for not fully understand some things. But i am open to any help that can be spared.
Thanks in advance
Click to expand...
Click to collapse
Thanks, I hope your holidays were great as well. I understand your reasoning for concern. I haven't been able to successfully use supersu to handle root operations. Busybox will not install correctly either for me. I have successfully achieved root access though through kingroot. I don't remember the version I used but it has been rooted for well over 2 months with zero issues. I have replaced my bootanimations without bootloops as well.
I am currently trying to romdump and pull device tree to see if I can get a KDZ created or ported. As I am trying to get twrp recovery installed. And I think the only way for that to happen is to get to 5.1. But to answer any doubt. My experience with kingroot has been okay. Also rootchecker apps confirm root as well.
Failbringer60 said:
Thanks, I hope your holidays were great as well. I understand your reasoning for concern. I haven't been able to successfully use supersu to handle root operations. Busybox will not install correctly either for me. I have successfully achieved root access though through kingroot. I don't remember the version I used but it has been rooted for well over 2 months with zero issues. I have replaced my bootanimations without bootloops as well.
I am currently trying to romdump and pull device tree to see if I can get a KDZ created or ported. As I am trying to get twrp recovery installed. And I think the only way for that to happen is to get to 5.1. But to answer any doubt. My experience with kingroot has been okay. Also rootchecker apps confirm root as well.
Click to expand...
Click to collapse
Thanks for your reply. I apologize for not being able to understand all the technical jargon when it comes to the android platform, but as i ask questions, i can pick up on it fairly quickly.
For now i take it that you are still figuring out a way to backup your android system, since the only offer the LG Destiny has, is to back up your data to google cloud. It seems that either tracfone devices took that ability away (since i think that any computer like device should have a recovery system - though i could be wrong) or it is a flaw in android 5.0.1 which is what our devices are running.
I take it that you are "romdump"-ing to kinda like create a clone in a storage space which you can turn into a recovery rom in case the device messes up - i think.
I'm glad to hear that Kingroot worked for you. I would like to try it too but i would first love to back up my system entirely so that if a noob like me does mess up, i haven't completely lost everything.
Can i ask you if you are able to delete/uninstall bloatware from your Destiny now that you have it rooted. But you say that you are not able to install supersu (which i assume is software that lets you control your device with admin rights)? Reading things online, i've come to see that kingroot has a supersu type of software, but that it's inferior or malicous or something, hence why people are trying to install supersu in replacement. I may be missing some facts there, but i'm always see a relationship between the two.
Would you lose your root access, or ability to remove bloatware and control other app permissions if you removed kingroot? Or is it supersu that retains the root access that kingroot achieved, but people are ridding their devices of kingroot because kingroot inevitably introduces its own bloatware at the price of a rooted device?
Sorry to sound all over the place. I've just seen a consistent connection between kingroot and supersu online everywhere i look. I've never seen how either of these apps work on a device once installed, but i do know that people are always using supersu right after using kingroot.
Exactly, for the LG leon user they got the update to 5.1 which enabled them to unlock the bootloader and flash a custom recovery for the ability to back up the rom. As for us Destiny users I think we aren't going to ever get anything but root for a while. And yes kingroot does install its own bloat ware. And I have removed all the stock bloatware that came with my phone.
Failbringer60 said:
Exactly, for the LG leon user they got the update to 5.1 which enabled them to unlock the bootloader and flash a custom recovery for the ability to back up the rom. As for us Destiny users I think we aren't going to ever get anything but root for a while. And yes kingroot does install its own bloat ware. And I have removed all the stock bloatware that came with my phone.
Click to expand...
Click to collapse
Hi Failbringer60,
Were you able to somehow successfully backup your Destiny's rom to use as a recovery source? I myself just went through a whole lot of folly and have practically lost my device. I believe my spoiled Destiny is soft-bricked. It will not boot past the LG logo screen. I don't think it's looping since it doesn't fade to black and return repetitively. It's just frozen on that screen. Now i'm diving deep and reading a whole lot more about such problems and solutions, and am learning much more. But sadly, the design Tracfone has left the Destiny (and most likely it's other android models alike) is quite handicapped. I've come to understand that there is absolutely no boot menu with particular options you'd normally find in flagship models, and recovery only works if, well, if the device still works (as far as i've tried everything i know). Part of that recovery would make sense if content was the only concern. Though any system based malfunction is merely a complete loss. I have yet to download and try a few pc applications that others use to connect to their android devices. But since needing exact phone/model firmware or system image backup to fix many android issues are what these pc applications use, and LG having completely omitted the lgl21g model from all their lists on their site (except for the product landing page of course), I have no idea how it would help my situation. For all I've said, i may stand corrected, since i have yet to attempt the revival of my device.
So i hope no one gets annoyed when i ask weird questions, but i'll do what i can and document my findings. If you or anyone else may know how to help me, I would very much appreciate it. If you need more info from me. let me know.
Thanks.