[Q] Unable to flash roms, Partition error?! - Sprint HTC EVO 4G LTE

I'm running TWRP v2.3.0.1 and I've been having a lot of trouble the past few days trying to flash roms. I was on a stock rooted evo lte with s-on two days ago.
I decided to try out the cm 10 and used flash image gui to flash the boot and then was on cm 10. Decided that I wanted a more stable rom (gps wasn't working) So i went back and restored my original backup of my stock rooted evo. However, the wifi is not working (all it says is wifi - error, won't turn on). So i did a little research and thought maybe something with switching back and forth between kernels went wrong. I'll try to flash a sense based rom the same way i did cm 10. At this point i try to make another backup just incase and its going through everything in twrp and in the end it says backup failed. So i figure well the orignal backup I have is fine and continue
So i open meanrom up in flash image gui it does its thing (clear dalvik, cache). Reboot into recovery go to install meanrom and get the following:
"-mean rom logo-
Formatting and mounting partition...
e:error in /sdcard/meanrom-ics-v48-jewel-ltevo.zip
(status 1)
error flashing zip '/sdcard/meanrom-ics-v48-jewel-ltevo.zip'
updating partition details"
and twrp says FAILED, at this point i'm thinking maybe a bad download i'll try another rom/download
So at this point i restore my system and once again wifi is not working and try the same using freshrom. flash image gui, clear cache, etc. Reboot into recovery and gives me the same error and says failed.
So now i'm stuck on a stock rom backup that worked fine when i orginally backed it up but now wifi has an error? doesn't make any sense to me and i'm not sure why i'm unable to flash and roms or create new backups

Try flashing TWRP 2.2.2.0 in fastboot

i was able to fix wifi using vel7wil advice in this thread http://forum.xda-developers.com/showthread.php?t=1900759&highlight=wifi+error so for now everything is working on my backup. I'll see if i'm still having issues flashing roms now.

Related

[Q] Bootloop help

well I was flashing MIUI V5 UNIVERSAL - v. 3.7.12 for the 3vo and it got stuck in a bootloop. to try and fix it I tried to restore a backup and that rom played a little of the boot animation but then gets stuck in a bootloop. I also tried to wipe/format everything but, that didn't work. If a logcat would help i would appreciate a link on how to do that without being able to boot. I can boot to 4ext recovery. The cause could be that while flashing I selected the file to flash, I selected a file that didn't finish downloading. Thanks in advance for any help
Also if it matters my original rom was negalite blurom.
cdog1213 said:
well I was flashing MIUI V5 UNIVERSAL - v. 3.7.12 for the 3vo and it got stuck in a bootloop. to try and fix it I tried to restore a backup and that rom played a little of the boot animation but then gets stuck in a bootloop. I also tried to wipe/format everything but, that didn't work. If a logcat would help i would appreciate a link on how to do that without being able to boot. I can boot to 4ext recovery. The cause could be that while flashing I selected the file to flash, I selected a file that didn't finish downloading. Thanks in advance for any help
Also if it matters my original rom was negalite blurom.
Click to expand...
Click to collapse
I ran into your same problem today.
At the time my phone was on latest sprint firmware, ICS coolrom (latest rom and kernel) with hboot 1.58 unlocked s-off.
The steps I did preparing to install MIUI was
1) wipe data/factory reset from 4EXT
2) format all (except sdcard)
3) Install MIUI > chose mirage kernal
4) rebooted
after reboot it was stuck at the logo, at least I thought it was, let it sit for about 5 minutes.
Pulled the battery and tried steps 1-4 again.
Kept getting bootloop at that point. Boot splash -> logo -> reboot.
Next I tried flashing the latest mirage kernel from 4ext.
No luck, same issue.
Tried repeating steps 1-4 again.
No luck stuck in bootloop.
At that point I tried to run recovery from a backup I knew was working.
Wiped all data and format all -> selected recovery from 4ext.
Result: still boot loop.
At that point I tried changing bootloader to 1.58.58 jbear. and wiping/formatting all and trying recovery again from known working cool ics backup.
Result: still bootloop.
Switched back to 1.58 bootloader and tried fresh install of CoolICS rom. (I always wipe all data and format all before any rom change.)
Result: still bootloop.
At this point I was getting frustrated but I had an idea that the MIUI install when selecting mirage kernel may have messed up the partition size for the kernel since the mirage kernel states it must be flashed from the flash gui app first to resize the boot partition.
Next I downloaded pacman rom and attempted that install.
result: could not install due to wrong bootloader.
Next I downgraded bootloader to 1.50.50 jbear.
Wiped everything and retried pacman rom.
Install success, before starting the reboot from recovery, I received a message that the boot image has changed and will make a backup/format/flash the new boot image.
upon reboot I was able to successfully boot into pacman rom.
At that point I tried to wipe all again and install CoolICS rom again.
result: bootloop, but probably because of bootloader version. Did not fully test it as at this point I just wanted a working phone again and wanted to try out MIUI.
Rebooted to recovery and wiped everything again.
Installed MIUI using stock kernel option. This time on reboot I let it sit at the rom logo without touching anything. I think it restarted once on its own.
Result: Success. Phone working normally now. such a headache I am just leaving it as is for now.
Jeffjb said:
I ran into your same problem today.
At the time my phone was on latest sprint firmware, ICS coolrom (latest rom and kernel) with hboot 1.58 unlocked s-off.
The steps I did preparing to install MIUI was
1) wipe data/factory reset from 4EXT
2) format all (except sdcard)
3) Install MIUI > chose mirage kernal
4) rebooted
after reboot it was stuck at the logo, at least I thought it was, let it sit for about 5 minutes.
Pulled the battery and tried steps 1-4 again.
Kept getting bootloop at that point. Boot splash -> logo -> reboot.
Next I tried flashing the latest mirage kernel from 4ext.
No luck, same issue.
Tried repeating steps 1-4 again.
No luck stuck in bootloop.
At that point I tried to run recovery from a backup I knew was working.
Wiped all data and format all -> selected recovery from 4ext.
Result: still boot loop.
At that point I tried changing bootloader to 1.58.58 jbear. and wiping/formatting all and trying recovery again from known working cool ics backup.
Result: still bootloop.
Switched back to 1.58 bootloader and tried fresh install of CoolICS rom. (I always wipe all data and format all before any rom change.)
Result: still bootloop.
At this point I was getting frustrated but I had an idea that the MIUI install when selecting mirage kernel may have messed up the partition size for the kernel since the mirage kernel states it must be flashed from the flash gui app first to resize the boot partition.
Next I downloaded pacman rom and attempted that install.
result: could not install due to wrong bootloader.
Next I downgraded bootloader to 1.50.50 jbear.
Wiped everything and retried pacman rom.
Install success, before starting the reboot from recovery, I received a message that the boot image has changed and will make a backup/format/flash the new boot image.
upon reboot I was able to successfully boot into pacman rom.
At that point I tried to wipe all again and install CoolICS rom again.
result: bootloop, but probably because of bootloader version. Did not fully test it as at this point I just wanted a working phone again and wanted to try out MIUI.
Rebooted to recovery and wiped everything again.
Installed MIUI using stock kernel option. This time on reboot I let it sit at the rom logo without touching anything. I think it restarted once on its own.
Result: Success. Phone working normally now. such a headache I am just leaving it as is for now.
Click to expand...
Click to collapse
well I went to go try and boot P.A.C. and my phone just booted normally. So thanks for the help

[Q] Q-Tried multiple recoveries no ROMs flash

So I'm tying to help my best friend flash CM11 on his e970, it's rooted and had TWRP 2.7.0.1 installed. I did a full backup and attempted to wipe data, system, cache, and dalvik. It would start then flash off and then back to TWRP again. Doing this one at a time showed that the error happened when attempting to wipe data. I tried the latest Phil's CWM and backed up wiped fine but when I attempted to install CM11 either M6 or the 052114 Nightly it gives a status 7 error. So I tried it with the latest CWM touch recovery and the same thing. Backups restore each time. I then attempted to flash Mokee thinking it must be an.issue with the downloads, and still status 7. Any ideas? Thanks, every time I google the error I read it's a recovery issue, now I'm not too sure it is in this case. 3 different recoveries and 3 different ROMs. I did keep the phone on ice to keep it cool when it was getting hit to be safe.
Thanks

Stuck on boot animation (cyanogenmod)

I was using my phone and all had been working fine for ages. It was in my pocket for a while and when i took it out to use it I saw that it was on the boot animation of CM11. My phone was already on when I last used it so I had assumed it had crashed. I took the battery out and turned the phone on again but it got stuck on the CM boot animation. The last time I turned on my phone before that was when I flashed a supersu zip file to make my root work as I was having some problems. After flashing the supersu zip and told my CWM recovery to restart the system, it prompted me to "fix root" or something like that, and I clicked yes and it booted normally. That was the last time it booted normally before being stuck as it is now. First thing I did after it got stuck was go into recovery and reflash my current rom ( a CM11 snapshot) I then got faced with a status 7 error and so couldnt flash the rom. So then I flashed multiple other CM11 roms, none of which worked, so I flashed a CM10.2 stable rom which worked. I then got faced with the fix root before reboot thing and so I clicked yes. Still had the stuck booting thingy. I tried many things, flashing kernals roms gapps etc and nothing made a difference. I wiped cache, dalvik cache and no difference. I even wiped the system and tried to flash roms but only the 10.2 one would work, still got a status 7 with the CM11 ones. When I wiped my data however and flashed CM 10.2, it booted. I still couldn't flash the CM11 roms though even after a factory reset. So I have the reason to believe something in the data is wrong, not cache system or anything like that. What could it be? I don't want to have to lose all my data in order to be able to use my phone again, even then, something is still wrong as my phone won't flash CM11 roms anymore. So my questions are;
What things could have caused this?
Can this be a problem from flashing the supersu zip (a root issue)
Is it possible to somehow view or copy the internal data on a computer (since I cant get into the operating system), and this would allow me to get all my pictures contacts music etc anything so I can use my phone by wiping data?
Thanks, sorry this is quite long and probably hard to understand whats going on, but help is appriciated thanks
Don't fix root if you wish to use SuperSU instead builded-in cm superuser. Also try to flash via Odin latest recovery. TWRP should be fine. You can mount partitions from recovery level to download data to your computer. Of course if it still exists. If not, if they are corrupted you need to flash stock ROM and repeat whole cm11 adventure again. If Odin successfully flash the stock then it's a chance your partition layout and user data are untouched.
____________________________________________
P3110 / I9300 / I9100 / NEXUS 5 / iPAD2

[Q] Need Working Kobo 10HD CWM Flashable ZIP

Hello,
I have a Kobo 10HD and rooted and installed CWM v6.0.5.1. I made a backup before and then installed Titanium Backup update.zip. Installation of that zip caused a bootloop (back to CWM). No problem, I thought, I can just restore the backup I made. No dice. I tried to restore the backup and still bootlooping. I even tried to installed the stock ROM ZIP and it fails with the message: (from recovery.log):
nv_copy_blob_file: couldn't get the device path
script aborted (no error message)
script aborted (no error message)I:Legacy property environment disabled.
E:Error in /data/media/0/macallan-ota-932.zip
(Status 7)
Installation aborted.
I have read that some people have had success installing this zip using stock recovery, but I have no idea how to get stock recovery.
Also, I noticed using adb shell that CWM does actually put all the files back into system and other areas during the restore. Upon reboot, and subsequent bootloop, the system files are gone. It must have something to do with an automatic script that is running after restore.
SOLVED!
zhzhou said:
Hello,
I have a Kobo 10HD and rooted and installed CWM v6.0.5.1. I made a backup before and then installed Titanium Backup update.zip. Installation of that zip caused a bootloop (back to CWM). No problem, I thought, I can just restore the backup I made. No dice. I tried to restore the backup and still bootlooping. I even tried to installed the stock ROM ZIP and it fails with the message: (from recovery.log):
nv_copy_blob_file: couldn't get the device path
script aborted (no error message)
script aborted (no error message)I:Legacy property environment disabled.
E:Error in /data/media/0/macallan-ota-932.zip
(Status 7)
Installation aborted.
I have read that some people have had success installing this zip using stock recovery, but I have no idea how to get stock recovery.
Also, I noticed using adb shell that CWM does actually put all the files back into system and other areas during the restore. Upon reboot, and subsequent bootloop, the system files are gone. It must have something to do with an automatic script that is running after restore.
Click to expand...
Click to collapse
After a few more hours of fiddling, I was able to get the device back up. I wiped absolutely everything manually with CWM (format /X) instead of Wipe/Factory Reset. The factory reset was not clearing the SD card, but format/data and /data/media cleared it. I then applied the stock zip that is available via adb sideload. Installation failed with the same error, but I rebooted with the adb reboot command. The device booted back into Kobo stock requiring several updates. It actually got stuck repeating one update several times until I booted back into stock recovery and cleared data and did a factory reset. The update applied correctly and then another upgrade came (a total of three upgrades). I rooted again and we are back in business.
For some reason, I think the key step was manually wiping /data/media. I'm not exactly sure why this would cause a bootloop for CWM restore. Anyway, I hope this helps someone else who may run into a similar issue.
Hi zhzhou!
Just a quick question:
do you happen to remember if stock recovery for Kobo was CWM? I'm in process of restoring stock ROM +recovery and little bet surprised to see CWM after flashing stock recovery
Thanks a lot!
zhzhou said:
After a few more hours of fiddling, I was able to get the device back up. I wiped absolutely everything manually with CWM (format /X) instead of Wipe/Factory Reset. The factory reset was not clearing the SD card, but format/data and /data/media cleared it. I then applied the stock zip that is available via adb sideload. Installation failed with the same error, but I rebooted with the adb reboot command. The device booted back into Kobo stock requiring several updates. It actually got stuck repeating one update several times until I booted back into stock recovery and cleared data and did a factory reset. The update applied correctly and then another upgrade came (a total of three upgrades). I rooted again and we are back in business.
For some reason, I think the key step was manually wiping /data/media. I'm not exactly sure why this would cause a bootloop for CWM restore. Anyway, I hope this helps someone else who may run into a similar issue.
Click to expand...
Click to collapse
Stock was definitely not CWM. It was a long time ago and I no longer have the device, but I think CWM was still present after restoring stock. I think you'll need fastboot if you want to flash the stock recovery image back on. But why do that? TWRP is now available for the device.
Thanks for quick reply! I had CM on it but had some artifact issues so wanted to revert to full stock, even recovery
zhzhou said:
Stock was definitely not CWM. It was a long time ago and I no longer have the device, but I think CWM was still present after restoring stock. I think you'll need fastboot if you want to flash the stock recovery image back on. But why do that? TWRP is now available for the device.
Click to expand...
Click to collapse

Xiaomi Mi 9t wont load any custom rom or restore backup

hey guys just looking for some help. ive been modding and flashing phones from 2014, but its always gone really smoothly, so my diagnostic ability is lacking.
it started with flashing twrp. my bootloader is unlocked, usb debugging on, device is showing in adb and fastboot, and i can flash twrp without any issues. hoowever when i go to boot twrp, only the stock recovery boots. i tried to flash twrp using the XiaoMiTool v2, but the same thing happened. i eventually got around this by just booting twrp instead of trying to flash it. so i got in, took a full back-up and started installing a custom rom.
the first one i tried was ParanoidAndroid Quartz. i wiped cache, dalvik and storage then transferred it to my phone, tried to flash and got "zip verification failed". so i turn off zip verification and tried again. it flashed perfectly with zero errors. however, when i reboot the phone it would only boot to stock recovery and not twrp (expected) or the new rom. i tried that a few times, then tried LineageOS, and MSM Xtended 10. all of them had the same issue, the flashed without a hitch, then wouldnt boot.
i also tried flashing a new fw-vendor and it just straight up failed. Then i decided to cut my losses and restore my twrp backup, and that came back with the error, "extractTarFork() process ended with error: 255"
Software before i began these attempts was completely stock, so i dont know what is going wrong, but as of now, my phone is bricked, i cant install a new rom or restore my back-up.
any help is appreciated guys. thanks
You can figure out this problem with
1 Copy backup folder to computer
2- Format Data - Yes , Wipe Everything
3- Install ROM that you have installed before and boot
4- Go to TWRP, format data yes reboot recovery
5- Paste backup folder to internal storage and restore

Categories

Resources