[Q] Problem to Update MT15i from 431 to 587 - Sony Ericsson Xperia Neo, Pro

I've got an MT15i with version 4.1.B.0.431, kernel 2.6.32.9-perf [email protected] #1, rooted, SI 1247-1256 with 58MB free internal memory (though it seens to be wrong, 'cause every time I try to install something it says I don't have enough memory, even though it's only about 5MB) and 1,7GB free SD memory.
Recently I received an message from update center telling me I got a new update to install, 4.1.B.0.587, but every time I try to update it I get an error message standing I got an error and I should try later - I tried it using both the phone and my computer - but this generic message is totaly useless.
It's funny because sony's forum says the latest version to 1247-1256 is 431.
I guess it useful to say I updated my Android from 2.3.4 to 4.0.4 using an update I found in this very forum because it was taking to long for the update to be officially released to my SI model (Brazil). At the time I double checked it to make sure I was installing the right update (MT15i not MT11i)
Any ideias?
Thanks

I have the same problem when i try do update to 587 after i unloock bootloader.
My friend has that problem when he remove some system apps an try to update to 587 by update center.
I do backup by Titanium Backup, flash 587 by Flashtool and root by CWM.

Related

Software update today?

Downloading right now update for xperia mini, I was not aware it was going to be released today, hope its goods anyways, keep you posted when it finishes
Heh really what version would this be? Hows the progress?
Sent using x10 mini pro
50% this are the times I wish I had a 2gigabit connection :/
done
Software version: 2.1-update1
dont know whats new, no intro as past update was shown on startup...
ahh.. phone unrooted, z4root not working stuck on running exploit screen.
How did you update?
Through wireless or through cable with a pc software like the pc companion?
Did the phone tell about the update when you searched for update?
Please I need to know!
pc companion... software on pc alerted of the update when I conected the phone, tried to search for an update from the phone but it told me it was up to date.
got to see about the availability of an update when I connected my mini to my PC and the PC Companion opened up.Went for the update that took such a long time to complete.I see virtually nothing new or beneficial in the few hours gone by.Oh-I lost the ability to root the phone,Z4 doesn't work anymore.
Didn't find any update not even with pc companion
:-/
same here .. there was no prompt when i plugged in the mini pro.
when i opened PC Companion, it says that I already up the latest update.
I'm usually pretty quick on the updates but this one looks like one to avoid until we can sort out the root issue..
I noticed they already have a solution for the Big X10 by installing a pre Rooted version of the update with xRecovery.. any solution like this available for the mini/pro yet?
All in good time I guess.. someone is probably making a Pre rooted, pre JIT'ed pre Gingerbread themed xRecovery zip file with the new firmware as I type this
fingers crossed..
I'm sorry....
Your stock album is now fast?
Because the first 2.1 stock album is very slow.....
I think that you can't extract for us... But....
Me too updated my mini and now unable to root. How to get back to previous one?
I could be mistaken, but i think x10flasher root method still works.
Downloaded 2.1-update1 (as it says on my phone) on the 24th, almost certain its the unrootable version u guys seem to be talking about, as z4root which worked for my 1.6, couldnt unroot this version(i also thought it was root patched)
Long story short, was messing around with it, tried the X10flasher 2.1 root method, hey presto rooted phone. So give it a shot, wont hurt, and if im right, still a viable root method for 2.1.
Here's the link
http://forum.xda-developers.com/showpost.php?p=8976947&postcount=1
If im wrong, sorry for bringing hopes up.
banderos101 said:
I could be mistaken, but i think x10flasher root method still works.
Downloaded 2.1-update1 (as it says on my phone) on the 24th, almost certain its the unrootable version u guys seem to be talking about, as z4root which worked for my 1.6, couldnt unroot this version(i also thought it was root patched)
Long story short, was messing around with it, tried the X10flasher 2.1 root method, hey presto rooted phone. So give it a shot, wont hurt, and if im right, still a viable root method for 2.1.
Here's the link
http://forum.xda-developers.com/showpost.php?p=8976947&postcount=1
If im wrong, sorry for bringing hopes up.
Click to expand...
Click to collapse
It just looks like the Big X10flash GUI's "Root" option just installs Z4root onto the phone in which case it should be no different from just trying to use Z4root to root without the Flashtool... unless Bin4ry just has a different version of Z4root that works on the new firmware? (easy enough for someone having issues rooting with the new update to download his Flash tool and grab the Z4root version he uses out of it to try.. I don't hold high hopes tho, you can always use his flashtool to flash back to the old 2.1 and not update with SE until the root issue is sorted)
(also, I haven't updated my phone in weeks and it say's its running "2.1-update 1" so its possible you are still on the older rootable version, and it was just the version of Z4root you were using wasn't compatible with 2.1, lest hope I am wrong tho cause it would be great if this works!! )
Got the update. It killed my root and apparently my market? Any attempts to start Market crash immediately.
The new 2.1 update 1 is ver. 2.0.2.A.0.24
This is the one i got 24dec. in denmark, and this one wont root with z4root.
Still waithing for this to be fixed
is there any way to root it again?

[Q] Root neo with 2.3.4. and unlocked bootloader

Hi, here is my story.
I bought a Neo network free and I made update OTA from 2.3.3. at 2.3.4 and I got a brick Neo after this. To unbrick it, a friend flashed a new 2.3.3 ftf and after I used the X10 flash tool to repair the loader. After this I rooted with DooMLord_v4_ROOT. All good so far.
After this I got the message that is available a new update. To not repeat again the story I made the update with SE software update trought PC.
Now I have 2.3.4. on my Neo, in the applications menu I have Superuser and done the update, but my phone is not rooted. If I try to install any app what need root permisions I get the message that my phone is not rooted. I had installed AD free app before update to 2.3.4., now is there but is not running. Same the Auto app 2 SD (need root permisions).
I tried SuperOneClick v2.3.3, again DooMLord_v4_ROOT, Gingerbreak and all failed to root my phone.
How can I root my Neo without downgrade the FW and upgrade again?
Thanks.
please use search function and post your questions in an existing thread. Thanks

Root issues + confused after 4.0.4 update

Hi,
i bought a Samsung Galaxy S3 GT-I9300 about two months ago, it's a Spanish device. I think the device came with 4.0.1 update of ICS, some weeks after buying it got 4.0.4 update and then using CF-Root 6.4 and Odin 1.85 managed to get root access so i was able to install busybox and UMS application from xda forums. So everything was working fine. Then, about 3 days ago i got an update notification which showed me a message which said "Updates will be provided in the request order preference" or something like this, i tried to update a few times more but no luck, i always got the same messages so i thought i had to wait for 4.1 update to get published but anyway everything was working fine.
The curious thing is yesterday ( August 25, 2012), when i woke up i noticed a firmware update was ready to be installed so went through it (without uninstalling CF-Root 6.4, supersu, etc.) but the strange thing was, after the update completed fine, went to settings to check the version and i saw it still/again was 4.0.4 version of ICS. Also noticed Google Play Books and Google Play Movies got installed so on one hand it seemed everything went fine cause new apps were there and everything worked as expected but on the other hand i think i already had 4.0.4 update installed on the device. Till that point one can think i got confused on the versions i got installed before the update and no major problem here. After that, as i already had root access on the device, i went to check if i still could run UMS app but it complained about missing root access so as i did before that last Android update took CF-Root 6.4 and Odin 1.85 to flash the device and get root access again (Without removing any previous install of CF-Root, super su, busybox, etc. ) but had no luck, so now it's not possible for me get root access again but i'm also still wondering how is it possible that today's update left the phone with the same Android version as before the update.
The only explanation i can find is the phone came with 4.0 version, first update got me to 4.0.1 and today's update guided me to the 4.0.4 but i'm still wondering why root access is not working as it should.
So my questions are, did i got confused about each version update? Then why can't i get root access again just repeating the same first process?
When opening busybox i can read "Not Enough Free Space in /system". Opening /system directory with Root Explorer i can read 1.05GB used, 436.39MB free. Is it right /system directory takes up to 1GB of the space? Why Busybox thinks there is 0.0MB free there?
Hope someone can help. Thanks in advanced!
Thousands of posts say OTA updates may fail if the phone is rooted .
Usual is to fail part way through an update ..
Suggest wipe the phone flash stock rom with Odin then root .
jje
JJEgan said:
Thousands of posts say OTA updates may fail if the phone is rooted .
Usual is to fail part way through an update ..
Suggest wipe the phone flash stock rom with Odin then root .
jje
Click to expand...
Click to collapse
Thanks a lot for the info. Am i going to loose installed apps, system settings, etc when doing the suggested process? Do i really need to wipe the phone before flashing the phone? I suppose i can find stock rom for my model here in the forums. Thanks!!
Hi,
i'm looking for a stock firmware for my SGS3 BaseBand I9300XXLH1 but i'm not able to find it. I think the firmware which came with my phone is unbranded and from Spain. But the question which i'm wondering is, do i really need to flash the phone? Isn't possible to solve the issue in another manner? After updating through OTA the rooted device, what's supposed to went wrong?
Lastly, what's wrong on updating a stock rooted firmware using Phone/Android update system? Don't understand how doing that can break the phone forcing me to wipe data and flash the phone.
Hope someone can help. Thanks a lot!
PD: After rebooting the phone in recovery mode i can see stock recovery has been installed with last update. Hope someone can make a bit of sense about it all. Thanks in advanced.
sibok said:
Hi,
i'm looking for a stock firmware for my SGS3 BaseBand I9300XXLH1 but i'm not able to find it. I think the firmware which came with my phone is unbranded and from Spain. But the question which i'm wondering is, do i really need to flash the phone? Isn't possible to solve the issue in another manner? After updating through OTA the rooted device, what's supposed to went wrong?
Lastly, what's wrong on updating a stock rooted firmware using Phone/Android update system? Don't understand how doing that can break the phone forcing me to wipe data and flash the phone.
Hope someone can help. Thanks a lot!
PD: After rebooting the phone in recovery mode i can see stock recovery has been installed with last update. Hope someone can make a bit of sense about it all. Thanks in advanced.
Click to expand...
Click to collapse
Get your firmware from here http://www.samfirmware.com/
then use odin to flash it, I had the same problem
Baseband is modem not firmware.
jje
Sent from my GT-I9300 using xda premium
Thanks to both for your answers. Maybe it's stupid but i'm some what more peaceful knowing other people also happened the same issue although it still feels very weird. All i did is flashing with CF-Root 6.4.
I've been looking for the stock firmware which is supposed to came with my phone at sammobile site but i'm not able to find it, although at that point ( where the phone got the same update twice, 4.0.4 ) i don't think i can trust the information provided by the phone. Under phone settings i can see Model Number is GT-l9300 and Base Band Version is i9300XXLH1 but i can't find it no sammobile site. What i find at sammobile site is I9300XXBLH1 ( notice B letter ) but i think that before this weird behaviour happened the phone showed Base Band Version I9300XXBLFB.
Is it all possible or the weird one is me?
Kickasskev, did you got 4.0.4 update twice?
Thanks again to all!
REPEAT BASEBAND IS NOT FIRMWARE nor is it firmware version .
To locate firmware try CHECKFUS .
Or stock providers roms from the sticky on XDA .
jje
sibok said:
Hi,
i bought a Samsung Galaxy S3 GT-I9300 about two months ago, it's a Spanish device. I think the device came with 4.0.1 update of ICS, some weeks after buying it got 4.0.4 update and then using CF-Root 6.4 and Odin 1.85 managed to get root access so i was able to install busybox and UMS application from xda forums. So everything was working fine. Then, about 3 days ago i got an update notification which showed me a message which said "Updates will be provided in the request order preference" or something like this, i tried to update a few times more but no luck, i always got the same messages so i thought i had to wait for 4.1 update to get published but anyway everything was working fine.
The curious thing is yesterday ( August 25, 2012), when i woke up i noticed a firmware update was ready to be installed so went through it (without uninstalling CF-Root 6.4, supersu, etc.) but the strange thing was, after the update completed fine, went to settings to check the version and i saw it still/again was 4.0.4 version of ICS. Also noticed Google Play Books and Google Play Movies got installed so on one hand it seemed everything went fine cause new apps were there and everything worked as expected but on the other hand i think i already had 4.0.4 update installed on the device. Till that point one can think i got confused on the versions i got installed before the update and no major problem here. After that, as i already had root access on the device, i went to check if i still could run UMS app but it complained about missing root access so as i did before that last Android update took CF-Root 6.4 and Odin 1.85 to flash the device and get root access again (Without removing any previous install of CF-Root, super su, busybox, etc. ) but had no luck, so now it's not possible for me get root access again but i'm also still wondering how is it possible that today's update left the phone with the same Android version as before the update.
The only explanation i can find is the phone came with 4.0 version, first update got me to 4.0.1 and today's update guided me to the 4.0.4 but i'm still wondering why root access is not working as it should.
So my questions are, did i got confused about each version update? Then why can't i get root access again just repeating the same first process?
When opening busybox i can read "Not Enough Free Space in /system". Opening /system directory with Root Explorer i can read 1.05GB used, 436.39MB free. Is it right /system directory takes up to 1GB of the space? Why Busybox thinks there is 0.0MB free there?
Hope someone can help. Thanks in advanced!
Click to expand...
Click to collapse
0. Remove all root apps from your phone.
1. Back up your rooted rom in cWM.
2. Use triangle away to get rid of the traingle.
3. Format system and cache.
4. Flash an official rom.
5. You should have all your apps + settings on a stock rom without the status being 'modified'.
victorator said:
0. Remove all root apps from your phone.
1. Back up your rooted rom in cWM.
2. Use triangle away to get rid of the traingle.
3. Format system and cache.
4. Flash an official rom.
5. You should have all your apps + settings on a stock rom without the status being 'modified'.
Click to expand...
Click to collapse
I've used checkfus and now i know my firmware.
Thanks for the step by step tips, but my phone is not rooted so i cannot use cwm, triangleapp and so. I. Annot also remove cwm manager nor supersu. I suppose i'll have to flash stock firmware first of all. Am i right?
Pretty strange, first time i rooted the device through cf-root6.4 it run flawlessly, but now i had to remove the battery after flashing ( while device was on ) and enter into recovery mode by hand which started the rooting process.
Thanks!

[Q] [GSM/EU]Software update failed

Hi guys... hope that this post reads also someone from development. If it should be placed there, please move it.
So, here is my problem:
I`m having rooted Razr and OTA update comes to my region. I downloaded update and tried to update, but it failed. I didn't uninstall any of bloatware, just frozen it, but even after unfreezing it won't do update as well. I red some manuals and so on, so i removed bootstrap recovery also but still the same. Looks, that I need to re-install original FW to make it working - right?
I checked possibilities and there are not too many. RAZR utility 1.6 it is not possible download anywhere - links are mostly broken and 1.7 is for ICS only, so only options is using of RSDLite. I found following "tutorial" about RSDLite. I'm almost sure, that after update there wouldn't be possibility to update for a while, so I kept original downloaded OTA update ZIP, but do not know what to do with.
Could somebody say, if it is correct way how to update to ICS? Do I really needs to reflash original ROM and than try to update it to ICS via OTA? Is there some easy way to update if I have downloaded OTA update ZIP?
Some ideas?
Sorry for English...
System version: 651.73.30.XT910.NonEFIGSRetail.en.EU
Android: 2.3.5
Baseband: U_03.1C.85P

PC companion says I have older firmware

Hi,
I have read a few times on here that there was a small update for .28 firmware. I opened PC Companion & it said there was a update available but failed to apply as I have unlocked bootloader, rooted & running Andro kernel. Error message was device has tampered\modified software installed.
The thing is pc companion says I have firmware version 23.1.A.0.726 when I actually have 23.1.A.1.28 installed. Is there any way I can get the small update for .28 that was about 25mb. I have generic unbranded UK rom .28 installed. Maybe a flashable zip for it?
Cheers for any help
there are two different versions of .28. One ist named R3C and the last one is R4C
Cheers for the reply.
I updated mine to 23.1.A.1.28 with a clean flash & wipe with flashtool on the 18th May, according to the service menu I have 1282-0226_R4C in the customisation version line & 1282-0226_R4C in the active customisation line. So that should mean I'm on the latest version of 23.1.A.1.28
I remember reading on here that there was a small update to 23.1.A.1.28
eagle25884 said:
Today there has been an Update to existing 23.1.A.1.28 (12,1 MB). Positive: After updating Root still exists.
Any Information about ChangeLog ? Could not find anything about it.
edit:
incoming EMail says:
This software includes:
• All of our latest bug fixes and enhancements
Click to expand...
Click to collapse
Due to the fact that pc companion wont update mine as it is unlocked bootloader & rooter with Andro kernel I let pc companion download the firmware (it downloaded the full firmware & not just the small update) & then used flashtool to decrypt it & create a FTF file minus the .ta files. I take it flashing that FTF would lose root, xposed & andro kernel but I should be able to just reflash those?

Categories

Resources