Hi i am running RR 2.6.1 not running siyah kernel currently. However im wanting to flash siyah kernel so I can dual boot running a rom that I can use a MHL cable with.
Couple of questions,
Which version of Siyah Kernel should I flash with RR 2.6.1? Will the latest version be OK?
Which ROM is recommended for using MHL HMDI with my S2? Is stock the best option here?
jackURbody said:
Hi i am running RR 2.6.1 not running siyah kernel currently. However im wanting to flash siyah kernel so I can dual boot running a rom that I can use a MHL cable with.
Couple of questions,
Which version of Siyah Kernel should I flash with RR 2.6.1? Will the latest version be OK?
Which ROM is recommended for using MHL HMDI with my S2? Is stock the best option here?
Click to expand...
Click to collapse
The latest siyah wouldn't work, I believe. You'd need siyah 4.1.5 or lower to run RR 2.6
As far as MHL is concerned, your best bet would be a stock rom. ICS 4.0.3 is preferable.
HAXTREME said:
The latest siyah wouldn't work, I believe. You'd need siyah 4.1.5 or lower to run RR 2.6
As far as MHL is concerned, your best bet would be a stock rom. ICS 4.0.3 is preferable.
Click to expand...
Click to collapse
Thanks, sounds good, I will flash 4.1.5 tonight.
Why does this kernel I stuck my phone ?
poshtvane said:
Why does this kernel I stuck my phone ?
Click to expand...
Click to collapse
Probably coz you're using a ROM which has the new Mali drivers. For that use siyah 5.0
Sent from my GT-I9100 using xda app-developers app
I ended up installing wanamlite as my secondary rom. MHL is working perfectly. Cheers.
Hi.
I like the siyah kernel. However if I try to update my ROM from 3.1.2 to 3.1.3 and choose custom... it gives me 2 kernels to choose from... not syrah.
How do I keep my kernel???
eggface5 said:
Hi.
I like the siyah kernel. However if I try to update my ROM from 3.1.2 to 3.1.3 and choose custom... it gives me 2 kernels to choose from... not syrah.
How do I keep my kernel???
Click to expand...
Click to collapse
Simple.
After installing rom just go back into recovery and flash Siyah.
I think you shouldn't flash siyah kernel its not working good with 4.2.1 ROMs better flash largest version of dorinmax kernel it's a moded version of siyah and better that's why it isn't included and I think you try rootbox rom RR 3.1.3 is buggy there are official version of rootbox and nightlies
Sent from my GT-I9100 using xda premium
Angelkom said:
I think you shouldn't flash siyah kernel its not working good with 4.2.1 ROMs better flash largest version of dorinmax kernel it's a moded version of siyah and better that's why it isn't included and I think you try rootbox rom RR 3.1.3 is buggy there are official version of rootbox and nightlies
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
There is a vsync patched version of Siyah that apparently works fine with 4.2.1, however there is limitations on features of kernel.
Hello guys, im a S3 GT-I9300 user, and im very happy with my device.
Today i rooted and installed cmw 6.0.2.8 touch, i want to install Siyah kernel version 1.8.9 and i have stock Android Samsung Rom Jelly Bean 4.1.2, my question is... if i install Siyah will i lose my current rom? or i need to install first Siyah and then again stock rom?
Thx for the help!
Orioncol said:
Hello guys, im a S3 GT-I9300 user, and im very happy with my device.
Today i rooted and installed cmw 6.0.2.8 touch, i want to install Siyah kernel version 1.8.9 and i have stock Android Samsung Rom Jelly Bean 4.1.2, my question is... if i install Siyah will i lose my current rom? or i need to install first Siyah and then again stock rom?
Thx for the help!
Click to expand...
Click to collapse
No. Siyah is just a kernel. You can flash that without a doubt, as long as your Rom is supported by the kernel. But you should be fine I mean, I'm running it on MIUI ICS . Normally that should have bricked it ^^
CyanogenModded Very China-like, from my Samsung Galaxy S III
LG Familyguy59/Beatsleigher
Orioncol said:
Hello guys, im a S3 GT-I9300 user, and im very happy with my device.
Today i rooted and installed cmw 6.0.2.8 touch, i want to install Siyah kernel version 1.8.9 and i have stock Android Samsung Rom Jelly Bean 4.1.2, my question is... if i install Siyah will i lose my current rom? or i need to install first Siyah and then again stock rom?
Thx for the help!
Click to expand...
Click to collapse
As mentioned, Siyah is a kernel, not a rom. You can flash any kernel and keep your rom, as long as it is supported. Siyah currently supports anything besides the new leaked 4.2.1 roms which have different drivers. Hence you will be fine. In case you face some trouble you also can simply flash back your stock kernel (you can find most kernels in Perka's Stash).
Hi!
I bought a used SGS 2 really cheap yesterday as i lost my old one accidently last week.
Well, i know how to root, how to flash a kernel and rom and so on as i did it on my last SGS2. BUT, my last phone used ICS and this phone uses GB 2.3.5.
Well, i thought i just would root the phone, flash Siyah V5.0.1 and then the rom BUT after i flashed in Siyah, the phone wont start?! I boots trough both Siyah/Samsung logos but then it just turns white?!
What is it that i have to do to get my phone working with Omegas newest ROM and also with the newest Neatrom 4.8??
Do i need the dorimanx 9.sometin kernel for the newest OmegaROM? Which kernel for
I do have the insanechip and as i remember Siyah was the safest kernel last time i did theese kind of things?
So, can someone kindly guide me trough this as I am sure that I am missing something that f**ks everything up..
Thanks in advance //Mathias
Ok lets go:
1. Flash any stock jb 4.1.2 by odin
2.flash dorimanx 8.34.tar by odin
3.boot phone ,download hawkerpaul cleaning script
a.gs2romnuke
b.gs2kernelwipe
c.u can download dorimanx 9.35 or keep kernel wot come with rom its up to u
d.copy this scripts+kernel with ur omega rom to phone
4.boot into cwm and flash:
a.flash gs2romnuke.zip
b.flash rom
From hete depends from u or skip and go to 5.
c.flash gs2kernelwipe.zip
d.flash kernel
5.reboot and enjoy
Sent from my GT-I9100 using xda premium
Hey guys.
I just bought a samsung tab 2 10.1 and want to flash it to cyanogen to get the multiple users that comes with android 4.2.x
I havent flashed in a while since i updated my i9100 to 4.1.2, so i thought best to flash my i9100 to cyanogen first to try it out as my phone is already rooted. I found a few guides for installing cyanogen to my phone using cwm recovery to install from the SD card.
I remember rooting my device back when i updated it to 4.1.2 but when i tried to boot into cwm is would boot into the stock android recovery.
so i figured i needed to flash cwm recovery.
after checking all kies processes were stopped i flashed the kernel "GT-I9100_ClockworkMod-Recovery_4.0.1.4" , but the phone would not boot and hang at start screen.. as a plus side i now had access to cwm recovery from boot... ironic.
so i booted into cwm recovery thinking to install cyanogen mod as i thought maybe the rom wasn't compatible with the kernel?
but noticed that the cyanogen rom was not present on the menu in cwm recovery, must of put it in the wrong place. I was now thinking to get my phone to boot into 4.1.2 that should still be on the phone, since the current kernel wasn't working i flashed "Siyah-v5-MCM-i9100-vsync_sysfs-20130217" in hopes it would be compatible.. still no luck with it booting. but i still have access to CWM recovery.
Any thoughts on how i should proceed? if i can get cyanogen onto the SD card should i install it via CWM?
little lost at the moment. been a while since i done all this.
here is the information i noted down before i started today.
4.1.2
i9100xxls8
3.0.31-863787 [email protected] #3 smp preempt thu jan 31 12:20:07 kst 2013
JZO54K.I9100xxms1
Thanks for reading.
Serathian
Philz kernel lss flash that through odin. Reboot to recovery, do the wipes and and reboot. 4.1.2 should boot up then. Then move custom rom to int sd and flash away. Philz installs custom cwm. Once you have flash custom rom philz will be replaced with stock custom kernel with cwm built in to it.
andrewwright said:
Philz kernel lss flash that through odin. Reboot to recovery, do the wipes and and reboot. 4.1.2 should boot up then. Then move custom rom to int sd and flash away. Philz installs custom cwm. Once you have flash custom rom philz will be replaced with stock custom kernel with cwm built in to it.
Click to expand...
Click to collapse
I'll give it a shot, is the Philz kernel you mentioned this one?;
<< 03.06.2013 - PhilZ-cwm6 v5.06.1 with CWM 6.0.3.2 based recovery >>
I'm not to sure what kernel version i need.
how would i find out this information ?
Many thanks.
Edit:
I noticed in my previous notes i made when first flashing my phone a year or so ago. The kernel i used was this;
3.0.15-I9100BGLP8-CL317471 [email protected]#3
It is now kernel version;
3.0.31-863787 [email protected] #3 smp preempt thu jan 31 12:20:07 kst 2013
which has no reference to previous kernels. but my current baseband version is: i9100xxls8
LS8 stands out in both... so would using PhilZ-cwm6-XWLSY-ORA-5.10.0.tar.md5 work on my phone?
Lss will work as it for 4.1.2 it just has newer cwm installed.tar is for odin. You could get the zip one and put on an sd card put bk in your phone and flash it like that. Make sure its zip not tar for flashing in cwm.
Thanks
andrewwright said:
Lss will work as it for 4.1.2 it just has newer cwm installed.tar is for odin. You could get the zip one and put on an sd card put bk in your phone and flash it like that. Make sure its zip not tar for flashing in cwm.
Click to expand...
Click to collapse
Thanks, that worked. opted for no installing the nightly version of cyanogenmod as i would like something more stable on my phone.
I've been looking at Resurrection Remix 3.1.2 or CM1UI Jelly Bean.
Is the Philz kernel i installed a widely compatible kernel or should i install Siyah ? my last attempt to install Siyah kernel lead me to write this post.. how would i go about installing a more widely compatible kernal with out ending up in a hang screen again ?
Kind regards and many thanks.
Serathian
Serathian said:
Is the Philz kernel i installed a widely compatible kernel or should i install Siyah ? my last attempt to install Siyah kernel lead me to write this post..
Click to expand...
Click to collapse
By 'compatible', you mean the kernel works with many ROMs?
Philz is a stock based kernel. So it only works on stock based ROMs, and depends on the android version and the build versions (like LSS, LSJ, LSD etc). Siyah is more compatible, because it only depends on the android version (like JB, ICS or GB).
You had a bootloop before after flashing Siyah mcm kernel, because the mcm kernel supports AOSP 4.2.2 ROMs, not stock JB.
Serathian said:
how would i go about installing a more widely compatible kernal with out ending up in a hang screen again ?
Click to expand...
Click to collapse
To avoid bootloops after flashing a kernel, use these tips:
1. Flash only kernels supported by your current firmware. Suppose you are running stock JB and you want to flash AOSP 4.2.2 ROM. You might be tempted to flash Siyah mcm kernel (because it supports AOSP 4.2.2). But that would end up in a bootloop as Siyah mcm doesn't support stock JB! :good:
2. Use a kernel cleaning script before flashing any kernels. :good:
immortalneo said:
By 'compatible', you mean the kernel works with many ROMs?
Philz is a stock based kernel. So it only works on stock based ROMs, and depends on the android version and the build versions (like LSS, LSJ, LSD etc). Siyah is more compatible, because it only depends on the android version (like JB, ICS or GB).
You had a bootloop before after flashing Siyah mcm kernel, because the mcm kernel supports AOSP 4.2.2 ROMs, not stock JB.
To avoid bootloops after flashing a kernel, use these tips:
1. Flash only kernels supported by your current firmware. Suppose you are running stock JB and you want to flash AOSP 4.2.2 ROM. You might be tempted to flash Siyah mcm kernel (because it supports AOSP 4.2.2). But that would end up in a bootloop as Siyah mcm doesn't support stock JB! :good:
2. Use a kernel cleaning script before flashing any kernels. :good:
Click to expand...
Click to collapse
Thanks for your reply, i have a few questions to try and understand.
Would i be right in saying;
When im looking to install a new kernel and/or Rom. My check list should be;
1. Kernel to phone compatability. I.e my phone is LS8 so i look for LSS/LSY/LSD soforth and so-on.
2. Kernel to Romcompatability. I.e Philz is a stock kernal hence why it works with 4.1.2 stock Rom.
So if i want to install Resurection Remixed i believe its a modified stock Rom so it should work with Philz?
As would cyanogenmod as it is modified stock?
Or is even that modified to much?
If i want to change both kernel and Rom, would it work if i installed for example siyah kernel then boot into CWM recovery and installed from there a new Rom?
Im looking to try out a few roms on my i9100, mainly Reserection remix, and other cyanogenmod clones with light modification as i enjoy the stock android experiance.
Also looking to install cyanogenmod to my p5100 tab. Flashing Philz p5100 kernal and then installing superuser through recovery and then installing cyanogenmod 10 stable version?
thanks for reading and taking the time to anwser my previous questions.
Many thanks
Serathian.
Serathian said:
Would i be right in saying;
When im looking to install a new kernel and/or Rom. My check list should be;
1. Kernel to phone compatability. I.e my phone is LS8 so i look for LSS/LSY/LSD soforth and so-on.
2. Kernel to Romcompatability. I.e Philz is a stock kernal hence why it works with 4.1.2 stock Rom.
So if i want to install Resurection Remixed i believe its a modified stock Rom so it should work with Philz?
As would cyanogenmod as it is modified stock?
Click to expand...
Click to collapse
Don't worry, things can be a bit hard to digest at first.
Let me make it easier:
1. U are currently using a stock or custom ROM, but you want to change the kernel (without any plans to flash a new ROM). In this case, you need to select a kernel that is compatible with your current ROM.
2. U are on a stock ROM, and you need to flash a custom ROM. You want to flash a kernel to root it and install CWM (to enable u to flash a new ROM). In this case also, u should flash a kernel that supports your current stock ROM.
3. U are on a custom ROM, and you want to try another custom ROM (which may require another kernel to support it). In this case, you DON'T need to flash a new kernel that will support ur new ROM. You can flash the new ROM directly. All custom ROMs come with their own supported kernels bundled in the ROM. So, after flashing the new ROM, your current kernel will be REPLACED by a supported one from the new ROM.
Better?
"To err is human, to forgive is divine. "
Sent from my SGS II
I dont believe that rr is stock based. Sorry I didnt reply xda app was down. Immortalneo is top man and will guide you down the right path.:thumbup:
immortalneo said:
Don't worry, things can be a bit hard to digest at first.
Let me make it easier:
1. U are currently using a stock or custom ROM, but you want to change the kernel (without any plans to flash a new ROM). In this case, you need to select a kernel that is compatible with your current ROM.
2. U are on a stock ROM, and you need to flash a custom ROM. You want to flash a kernel to root it and install CWM (to enable u to flash a new ROM). In this case also, u should flash a kernel that supports your current stock ROM.
3. U are on a custom ROM, and you want to try another custom ROM (which may require another kernel to support it). In this case, you DON'T need to flash a new kernel that will support ur new ROM. You can flash the new ROM directly. All custom ROMs come with their own supported kernels bundled in the ROM. So, after flashing the new ROM, your current kernel will be REPLACED by a supported one from the new ROM.
Better?
Click to expand...
Click to collapse
So my breakdown would be I'm using a Stock ROM with Philz kernel rooted and CWM. I want to Install Resurrection Remix which is a 4.2.x ROM, Philz is a 4.1.x Kernel so i need to install a new kernel to support Resurrection Remix? or would that come with its own Kernel?
And for my tablet. I flash Philz kernel and install superuser to root the device. so now its stock Rom with Philz kernel. So when i install Cyanogenmod Rom it will install its own Kernel or do i also need to install a Kernel that supports 4.2.x?
Or is it Firmware version based Kernel updates that happen when you install and new custom ROM?
i.e Running 4.1.x kernel and installing a 4.1.x Custom ROM will update the kernel, but installing a 4.2.x ROM will not?
vice versa Running a 4.2.x kernel and installing a 4.2.x ROM will update the kernel, but installing a 4.1.x ROM will not?
Kind Regards, I appreciate your time for reading my mind numbing questions.
Serathian
For you i9100 just flash the rom using philz cmw recovery and once its done you will have a custom rom with custom cm kernel which is rooted and has cwm with it. I would say to format system ,data, cache and preload before you flash it using philz recovery and make sure the rom and gapps is on int sd card were you can find it.
As for the tablet make sure philz is compatible with that tablet first!! Dont just flash it on that thinking because its 4.1.2 it will work.
Btw with philz also come with root access too.
Serathian said:
So my breakdown would be I'm using a Stock ROM with Philz kernel rooted and CWM. I want to Install Resurrection Remix which is a 4.2.x ROM, Philz is a 4.1.x Kernel so i need to install a new kernel to support Resurrection Remix? or would that come with its own Kernel?
Click to expand...
Click to collapse
No, you don't need to install a new kernel, because flashing RR will flash a compatible kernel (included in the ROM) by itself. :good:
Serathian said:
And for my tablet. I flash Philz kernel and install superuser to root the device. so now its stock Rom with Philz kernel. So when i install Cyanogenmod Rom it will install its own Kernel or do i also need to install a Kernel that supports 4.2.x?
Click to expand...
Click to collapse
CM ROM will install its own kernel, so you don't need to do that. :good:
Serathian said:
Or is it Firmware version based Kernel updates that happen when you install and new custom ROM?
i.e Running 4.1.x kernel and installing a 4.1.x Custom ROM will update the kernel, but installing a 4.2.x ROM will not?
vice versa Running a 4.2.x kernel and installing a 4.2.x ROM will update the kernel, but installing a 4.1.x ROM will not?
Click to expand...
Click to collapse
Don't overcomplicate stuff mate. When you flash a ROM, the kernel contained in the ROM will be replace your current kernel. Simple.
Thanks a lot!!!
I installed RR to my i9100 and cm10.1 to my p5100.
I'm having a little trouble with i9100 device though, I keep getting random sim locks on the device.. Not sure what could be causing it. It didn't happen on stock 4.1.2.
The devices will be locked and when I wake it I get prompted for the sim lock code. I now have the sim lock on my phone deactivated but I'm fearful that even thought I am not getting prompted for the sim code, the sim could be de-activated while the phone is in sleep thus not connect to the network?
Could be a loss of signal activate a security feature of the sim. Or a problem with the kernel?
Kind regards.
Many many thanks for all your advice into helping me understand a little better.
Serathian.
Sent from my GT-P5100 using xda app-developers app
If you're sim locked, then you want the app 'Galaxsim unlock'. Search for the xda thread, the OP is spocky12 if that helps you find it. It won't be kernel related. And, test it for yourself. See if you get messages /calls / push notifications while your screen is off & phone is sleeping.
Sent from a galaxy far, far away
The i9100 was originally sim locked, but I paid someone to unlock it, once I got the phone back from him "unlocking" it. It was apparent that he has flashed the device with a new kernel and ROM in order to unlock it... Not to sure of the process. A couple months later I flashed 4.1.2 as it wasn't available as a update on the ROM he installed. The phone re-sim locked and I downloaded the app you mentioned and unlocked the phone successfully, been happily using it up until I installed RR. Now I'm suffering from random pin locks. The phone connects to the network and functions perfectly, apart from said sim locks.
My only fear is missing important calls if this lock is causing network disconnections. Can I log network functions and connectivity to see what's causing it?
Regards
Sent from my GT-P5100 using xda app-developers app