So I bought a cheap OTG cable off amazon to connect my ps3 controller to my phone. I followed all Dancing Pixel Studios' instructions and I can use my controller while its plugged in, but it won't pair through bluetooth. When I press start it connects to the controller, but after it connects I try to click pair controller and it says "No controller found - please connect it via USB cable. The cable I bought is kind of janky, it only works when I position the cable just right. I don't think the cable is the problem because I get it to connect and I keep the cable in the exact same position and click pair and still nothing. I even tried pairing it in the bluetooth menu but it just keeps pairing and pairing, and nothing happens. BTW, I am on the latest cm9 build from gray wolf with little to no issues. Any help would be awesome!!!
uo959 said:
So I bought a cheap OTG cable off amazon to connect my ps3 controller to my phone. I followed all Dancing Pixel Studios' instructions and I can use my controller while its plugged in, but it won't pair through bluetooth. When I press start it connects to the controller, but after it connects I try to click pair controller and it says "No controller found - please connect it via USB cable. The cable I bought is kind of janky, it only works when I position the cable just right. I don't think the cable is the problem because I get it to connect and I keep the cable in the exact same position and click pair and still nothing. I even tried pairing it in the bluetooth menu but it just keeps pairing and pairing, and nothing happens. BTW, I am on the latest cm9 build from gray wolf with little to no issues. Any help would be awesome!!!
Click to expand...
Click to collapse
I've been using my PS3 controller with a Nexus 7 so it should work pretty much the same. To get it to pair through bluetooth, you must go to the dancing pixel website and download a little exe called something along the lines of bluetooth address changer or something like that. This will let you change the bluetooth address of the controller to the bluetooth address of your rezound. The controller will then pair with your phone through bluetooth. hope this helped!
zZDave_Stud said:
I've been using my PS3 controller with a Nexus 7 so it should work pretty much the same. To get it to pair through bluetooth, you must go to the dancing pixel website and download a little exe called something along the lines of bluetooth address changer or something like that. This will let you change the bluetooth address of the controller to the bluetooth address of your rezound. The controller will then pair with your phone through bluetooth. hope this helped!
Click to expand...
Click to collapse
I did this already. SixaxisPairTool is what it is called.
uo959 said:
I did this already. SixaxisPairTool is what it is called.
Click to expand...
Click to collapse
If it's still not pairing I would make sure that the bluetooth address of the controller matches the one of your rezound because that happened to me the first time I tried to pair it with my nexus 7.
zZDave_Stud said:
If it's still not pairing I would make sure that the bluetooth address of the controller matches the one of your rezound because that happened to me the first time I tried to pair it with my nexus 7.
Click to expand...
Click to collapse
Yep, just double checked it and it is exactly the same... this is annoying. I appreciate your help thus far though.
update: I just connected my controller to my phone, opened sixaxis app and pressed Start and it found the controller right away, so I pressed Change IME and chose ps3 controller and I used the d-pad and square to choose pair controller and click pair. It still said no controller found. Bahahaha!!!!
uo959 said:
Yep, just double checked it and it is exactly the same... this is annoying. I appreciate your help thus far though.
update: I just connected my controller to my phone, opened sixaxis app and pressed Start and it found the controller right away, so I pressed Change IME and chose ps3 controller and I used the d-pad and square to choose pair controller and click pair. It still said no controller found. Bahahaha!!!!
Click to expand...
Click to collapse
Hahaha nice, a faulty app! Glad I could help
If I remember right it's a Bluetooth stack/ Bluetooth driver issue on the
Rezound and other Sense phones. I believe there are some Non-Sense Roms that have the correct Stack/driver that will fix the issue but I can't remember which ones they are sorry. Also have you tried Wii remote? That works for me even on Sense Roms.
Sent from my Sense 4 ICS Rezound
LakerStar25 said:
If I remember right it's a Bluetooth stack/ Bluetooth driver issue on the
Rezound and other Sense phones. I believe there are some Non-Sense Roms that have the correct Stack/driver that will fix the issue but I can't remember which ones they are sorry. Also have you tried Wii remote? That works for me even on Sense Roms.
Sent from my Sense 4 ICS Rezound
Click to expand...
Click to collapse
You are correct, the only way to pair a ps3 controller on an HTC device, is to be rooted, and have an aosp, or an aokp Rom on ur phone. That's it. Plus.... You need to have an OEM ps3 controller. Any cheapo controller won't work
Sent from my ADR6425LVW using xda app-developers app
Related
i know you can use the wii mote via bluetooth to play our emulators. is it possible to create an app that can utilize the ps3 remote to play our roms. im no Dev so i wouldn't know where to begin to create such an app. i thought it would be cool to see an app like this
b0ricuaguerrero said:
i know you can use the wii mote via bluetooth to play our emulators. is it possible to create an app that can utilize the ps3 remote to play our roms. im no Dev so i wouldn't know where to begin to create such an app. i thought it would be cool to see an app like this
Click to expand...
Click to collapse
i think itd be possible to do it with any of the current gen controllers, but the wii mote app does not work on galaxy because it uses an old version of bluetooth and our phones have a newer version.
How would you pair the controller? I dont think ps3 ones will pair without a usb connection during pairing.
popypopy said:
How would you pair the controller? I dont think ps3 ones will pair without a usb connection during pairing.
Click to expand...
Click to collapse
thats the easy part, u can do that by booting off a linux live cd and running a program called sixpair, or WinDS3 on Windows. The hard part is getting the Galaxy S to recognize it
chaoscentral said:
thats the easy part, u can do that by booting off a linux live cd and running a program called sixpair, or WinDS3 on Windows. The hard part is getting the Galaxy S to recognize it
Click to expand...
Click to collapse
what? How would you do that on your phone? I nkow you can get it working on a pc, but you can PLUG IT IN on your pc. You can't plug it into the phone, and even if you had a cable allowing it, I don't think it has USB host, so it would never see the controller via USB to pair it..
I think he meant that you have to pair the ps3 controller to a pc or something other than a ps3 prior to trying to pair it with the phone. Have seen it discussed in other threads. Relating to his second comment, I am under the assumption that we don't have a proper HID implementation within the bt stack on our phones, hence why we can't connect bt keyboards, mice, etc. At least thats the way I understand it.
popypopy said:
what? How would you do that on your phone? I nkow you can get it working on a pc, but you can PLUG IT IN on your pc. You can't plug it into the phone, and even if you had a cable allowing it, I don't think it has USB host, so it would never see the controller via USB to pair it..
Click to expand...
Click to collapse
yes, you do initial pairing through a PC and put the master address of the bluetooth on the phone. thats how its done for windows mobile thats how itll have to be done for android seeing as how Sony chose to make the pairing over USB instead of wirelessly.
I am 99% sure that I have seen other people saying they have played emulators on their 10.1 using a ps3 Sixaxis controller.
I have downloaded the compatibility checker and it doesn't display a Bluetooth address at the bottom? I tried manually inputting the Bluetooth address from my settings screen, but still no joy.
I am running Starburst and pershoot kernel!
Thanks
Stewart
Sent from my Amiga 500 using Workbench
yes.... use the search function ;p
DroidHam said:
yes.... use the search function ;p
Click to expand...
Click to collapse
The search function was down when I posted!
Sent from my Amiga 500 using Workbench
You have to root the Tablet first before using the sixaxis app
Got it working now.
For some reason it wasn't asking for root access when I installed it before.
Sent from my Amiga 500 using Workbench
does it work on a 10.1v, too?
thanks
hebbe said:
does it work on a 10.1v, too?
thanks
Click to expand...
Click to collapse
I am not sure, download the compatibility app and check.
Sent from my Amiga 500 using Workbench
StuMcBill said:
I am not sure, download the compatibility app and check.
Sent from my Amiga 500 using Workbench
Click to expand...
Click to collapse
as far as i read already, the compatibility-check is worth nothing.
some say their check failed, but it worked though. other stated the check passed, and the app didn't work
another question: i get a ps3 controller from one of my friends. if i pair the controller with my tab via the pc-tool, will the controller still work on my friends ps3? does he have to re-pair the controller with the ps3? or will this be done automatically?
(i know that my questions may sound stupid, but as long as it's not my controller i want to make sure i won't damage anything).
thanks
hebbe said:
another question: i get a ps3 controller from one of my friends. if i pair the controller with my tab via the pc-tool, will the controller still work on my friends ps3? does he have to re-pair the controller with the ps3? or will this be done automatically?
(i know that my questions may sound stupid, but as long as it's not my controller i want to make sure i won't damage anything).
thanks
Click to expand...
Click to collapse
you will need to pair the controller wit his ps3 again
simple_punk said:
you will need to pair the controller wit his ps3 again
Click to expand...
Click to collapse
Nothing to technical, all you do is plug it into the ps3 via usb and it will do the rest.
evilbuttchimp said:
Nothing to technical, all you do is plug it into the ps3 via usb and it will do the rest.
Click to expand...
Click to collapse
Is it possible to use BT PS3 controller so that we can connect the Tab to TV while play the game? Thanks.
yongck7 said:
Is it possible to use BT PS3 controller so that we can connect the Tab to TV while play the game? Thanks.
Click to expand...
Click to collapse
Can't see why not, as long as you have the blue tooth enabled on the tab then it should still work.
strange...paired the controller via usb, pc and the pairing-tool.
installed sixaxis. started the app, clicked start, pressed the power-button of the controller, the lights on the controller stopped blinking and the light 1 stayed, sixaxis said 'client connected: 1'. then i changed the input method to sixaxis (activated it before in the settings).
but it doesn't seem to work in snesoid?! selected "use input method", tried to map the keys, but the controller doesn't seem to get recognized / to work.
am i missing something? what steps did you proceed to get it working? i'm desperate now, trying to get it to work since hours...
thanks for your help.
ps: the device is rooted and sixaxis got superuser rights.
hebbe said:
strange...paired the controller via usb, pc and the pairing-tool.
installed sixaxis. started the app, clicked start, pressed the power-button of the controller, the lights on the controller stopped blinking and the light 1 stayed, sixaxis said 'client connected: 1'. then i changed the input method to sixaxis (activated it before in the settings).
but it doesn't seem to work in snesoid?! selected "use input method", tried to map the keys, but the controller doesn't seem to get recognized / to work.
am i missing something? what steps did you proceed to get it working? i'm desperate now, trying to get it to work since hours...
thanks for your help.
ps: the device is rooted and sixaxis got superuser rights.
Click to expand...
Click to collapse
This exact thing happened to me too, and I realized that my actual Input Method was still the keyboard. Once I changed it to SixAxis everything worked.
Alpha Axl said:
This exact thing happened to me too, and I realized that my actual Input Method was still the keyboard. Once I changed it to SixAxis everything worked.
Click to expand...
Click to collapse
thanks for your answer. i already clicked on the button for changing the input method inside of the sixaxis app.like said in the instructions. no success at all
Hello, i was searching on the net for answers and your site was the most likely can answer them... i have a samsung galaxy tab p1000, and i want it to run the sixaxis controller. it shows connection failed ( so i guess it isnt compatible) but i saw that if i put a cyanogenmod in the tab, it will work... is this true or i must lose my hope of controlling my tab with a ps3 controller?
http://www.youtube.com/watch?v=X6kVLNq05Mo&feature=youtube_gdata_player
Sent from my SGH-T959 using XDA Premium App
http://www.youtube.com/watch?v=DpZSfFeae-4&feature=youtube_gdata_player
Sent from my SGH-T959 using XDA Premium App
well. the 10.1 got the capability. but i read the normal tab (7 inch one) doesnt have the bluetooth protocol to pair with the controller. there is something that i can do to be able to pair (hence the cyanogenmod rom) or just forget it and play in the screen?
I just got my USB OTG cable and I wanted to hook in a controller so I can use it for emulators. The PS3 controller doesn't seem to be recognized. Anyone know of any solutions?
Sent from my SAMSUNG-SGH-I777 using xda premium
Sixaxis controller app on the market will allow ps3 controller through bluetooth. Works great.
I voided my warranty and your mum.
pukemon said:
Sixaxis controller app on the market will allow ps3 controller through bluetooth. Works great.
I voided my warranty and your mum.
Click to expand...
Click to collapse
When I tried the App, it stated that I didn't have the right protocol. Hence why I am looking for another option.
Did you do the other part on the computer?
I voided my warranty and your mum.
pukemon said:
Did you do the other part on the computer?
I voided my warranty and your mum.
Click to expand...
Click to collapse
Of course, that's not the problem, the problem is the Bluetooth Stack on the SGSII AT&T apparently doesn't support the needed protocol. This also was confirmed on their site where they said there was an inability to use it with newer Samsung Devices.
You need to be running CM7 of Muiu, which use the working bluetooth stack.
hashish16 said:
You need to be running CM7 of Muiu, which use the working bluetooth stack.
Click to expand...
Click to collapse
I'm running Cognition right now, I'll try to see about splicing in CM7's Bluetooth Stack then, though I've heard mixed things about CM7's Stack working properly in terms of displaying Track Names over Bluetooth.
Woah.. Call me a noob, but it's possible to plug USB controllers into our phones for games!? THAT'S AWESOME. Definitely going to watch this thread for more info.
Afaik, no. But i could be wrong. Has it been done with a powered hub?
I voided my warranty and your mum.
pukemon said:
Afaik, no. But i could be wrong. Has it been done with a powered hub?
I voided my warranty and your mum.
Click to expand...
Click to collapse
It can be done with Honeycomb 3.1 I thought when they announced it a future update (anything past 2.3.3 I thought) was going to include it for Gingerbread, looks like we just have to wait for ICS
TBH the idea of a wireless controller is more attractive to me anyway. A PS3 controller can be combined with a market app to do the job? If so, would it be able to function as the input device for, say, NES/SNES emulators?
mdstricklin said:
TBH the idea of a wireless controller is more attractive to me anyway. A PS3 controller can be combined with a market app to do the job? If so, would it be able to function as the input device for, say, NES/SNES emulators?
Click to expand...
Click to collapse
Yes, typically you can remap the buttons and do such. Since I have been unable to do such, I'm trying to track down a bluetooth gamepad that I could use with my device that isn't a PS3 controller. There are some on the market, just trying to find the best option.
naturefreak85 said:
I just got my USB OTG cable and I wanted to hook in a controller so I can use it for emulators. The PS3 controller doesn't seem to be recognized. Anyone know of any solutions?
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Have you confirmed that the OTG cable is working for more "common" stuff?
The PS3 controller isn't a fully standard HID device, so requires a special kernel driver to work. I'll try to whip up a test kernel for you to try in a day or two.
FYI, in addition to the kernel support issue you may be subject to the same limitations as PS3 controllers on the Tab 10.1 - the PS3 controller MUST be fully charged prior to connection or it'll try to charge and trigger an overcurrent trip.
naturefreak85 said:
I'm running Cognition right now, I'll try to see about splicing in CM7's Bluetooth Stack then, though I've heard mixed things about CM7's Stack working properly in terms of displaying Track Names over Bluetooth.
Click to expand...
Click to collapse
It's next to impossible to do stack-splicing between CM7/MIUI and Samsung stock ROMs. I've never seen it done.
OTG Connects a Keyboard and USB Flash Drives. I tested it with a WD 500GB desktop drive also, works well.
I can say that the PS3 controller works great with the EEE Pad when it is plugged in, no Bluetooth support in Honeycomb. Though once ICS comes out, we should have native Gamepad support through USB then. That's going to be a glorious day.
Entropy512 said:
Have you confirmed that the OTG cable is working for more "common" stuff?
The PS3 controller isn't a fully standard HID device, so requires a special kernel driver to work. I'll try to whip up a test kernel for you to try in a day or two.
FYI, in addition to the kernel support issue you may be subject to the same limitations as PS3 controllers on the Tab 10.1 - the PS3 controller MUST be fully charged prior to connection or it'll try to charge and trigger an overcurrent trip.
It's next to impossible to do stack-splicing between CM7/MIUI and Samsung stock ROMs. I've never seen it done.
Click to expand...
Click to collapse
For what it's worth, I went ahead and got a DualShock 3 controller, the Sixaxis Controller app, and SNesoid/N64oid. After initial configuration they all work extremely well together, allowing some good on-the-go gaming. Now I'll finally have something to do on long car rides or between classes. Thanks for bringing this to my attention!
Note: I am running Cyanogenmod 7, which avoids the problem described here.
I just tried it with my PS3 controller. Works extremely well.
- First use the compatibility app to get a MAC address looking string, write it down somewhere.
- Then go on your computer, browse to dancing studio website and download the driver install app.
- While the driver install app is running, plug the PS3 controller into your PC, Windows 7 actually told me something like the driver has not been approved with MS, ignore it and proceed.
- Type the MAC address that you've obtained in step 1, and update the controller
- Download the Sixaxis app from marketplace for $1.79. Run it. Turn on your PS3 controller. Everything should be detected and it will ask to turn on Sixaxis Input method.
- Open up SNESdroid, map buttons, enjoy AWESOME gaming.
edit: I'm on Entropy's completely stock rom, but rooted of course.
naturefreak85 said:
OTG Connects a Keyboard and USB Flash Drives. I tested it with a WD 500GB desktop drive also, works well.
I can say that the PS3 controller works great with the EEE Pad when it is plugged in, no Bluetooth support in Honeycomb. Though once ICS comes out, we should have native Gamepad support through USB then. That's going to be a glorious day.
Click to expand...
Click to collapse
How did u get ur keyboard to work because mine is not working.
Sent from my SAMSUNG-SGH-I777 using xda premium
arctia said:
I just tried it with my PS3 controller. Works extremely well.
- First use the compatibility app to get a MAC address looking string, write it down somewhere.
- Then go on your computer, browse to dancing studio website and download the driver install app.
- While the driver install app is running, plug the PS3 controller into your PC, Windows 7 actually told me something like the driver has not been approved with MS, ignore it and proceed.
- Type the MAC address that you've obtained in step 1, and update the controller
- Download the Sixaxis app from marketplace for $1.79. Run it. Turn on your PS3 controller. Everything should be detected and it will ask to turn on Sixaxis Input method.
- Open up SNESdroid, map buttons, enjoy AWESOME gaming.
edit: I'm on Entropy's completely stock rom, but rooted of course.
Click to expand...
Click to collapse
Will this work with a normal stock without root? Thanks
hi brought an otg cable for my i777 and i can't get it to recognize my phone even with a power usb hub any help please using shostock rom 2.2.6
I was able to get a Playstation(2) USB controller adapter to work with an OTG cable in one of the ICS leaks. Also was able to get an original Xbox controller to work. But, since the leaks were found to be brick-happy, I've switched to AOKP with the Siyah kernel. The kernel works with keyboards and mice with OTG, but not game controllers yet, and the bluetooth stack isn't capable of connecting to a PS3 controller or Wiimote currently with CM-based ICS.
Please Help ;(
i want to connect a PS3 controller to my Prime
i have done the setup (MAC adress)
now i want to Pair it but it says i shoud to tipp the CODE ( 6776) on the controller to Pair ??
wehn i Push the PS3 Button the controller Light are blink (all 4) , some second s later nothing Blink ;(
i have installed de Sixaxis Controller app , but it doesent works ;(
i start Sixaxis and give Root , then the Controller connectet ( Client Connected : 1 ) all lights Blink
some seconds later nothing Blink and ( Client Disconnected : 1 )
only a single light should be lit , but NOTHING lights ;(
i have RESET the Controller but its like before ;(
must i put it in the Dock ?
THANKS FOR ALL
any idear ?
This is the Controller
http://www.ebay.de/itm/160736356269?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Pls Help
Here is what I did:
1. Installed the Sixaxis Controller app, opened it, and found the local bluetooth adress on the bottom-left of the screen.
2. Downloaded and installed Motionjoy Gamepad Tool on my computer.
3. Connected my ps3 controller to my computer using USB, and clicked "BluetoothPair", then "Custom MAC" on Motionjoy.
4. Entered my prime's bluetooth adress, and clicked "Pair Now".
5. Removed the usb cable and went back to my prime and changed input method to "Sixaxis Controller".
6. Clicked "start" and waited for it to say "Successfully Configered Bluetooth" on the sixaxis app.
7. Pressed the home botton on my ps3 controller and voila, it's connected!
kidio007 said:
Here is what I did:
1. Installed the Sixaxis Controller app, opened it, and found the local bluetooth adress on the bottom-left of the screen.
2. Downloaded and installed Motionjoy Gamepad Tool on my computer.
3. Connected my ps3 controller to my computer using USB, and clicked "BluetoothPair", then "Custom MAC" on Motionjoy.
4. Entered my prime's bluetooth adress, and clicked "Pair Now".
5. Removed the usb cable and went back to my prime and changed input method to "Sixaxis Controller".
6. Clicked "start" and waited for it to say "Successfully Configered Bluetooth" on the sixaxis app.
7. Pressed the home botton on my ps3 controller and voila, it's connected!
Click to expand...
Click to collapse
THANKS a lot ,
but it doesn´t work for me ;(
i have done all from your HOW TO , but ...
i start Sixaxis , then the Controller connectet ( Client Connected : 1 ) all lights Blink
BUT some seconds later nothing Blink and ( Client Disconnected : 1 )
PLEASE HELP
Ok. When you connect the ps3 controller to the computer and open Motionjoy and click BluetoothPair, does it say "Have paired to:" then the bluetooth adress next to it? Since it does say "Client Connected" once, then I think you got the setup right though.
Did you try to connect the ps3 controller to the prime using USB and pressing the home botton? Are you able to use the controller with USB? If that works, then I would try sixaxis again and make sure wifi is turned off. If it still disconnects, then I would try connecting another bluetooth device to the prime, to check if that is the problem. Also, if you haven't, try to reboot. If it still doesn't work, then you might have to use the USB cable.
kidio007 said:
Ok. When you connect the ps3 controller to the computer and open Motionjoy and click BluetoothPair, does it say "Have paired to:" then the bluetooth adress next to it? Since it does say "Client Connected" once, then I think you got the setup right though.
Did you try to connect the ps3 controller to the prime using USB and pressing the home botton? Are you able to use the controller with USB? If that works, then I would try sixaxis again and make sure wifi is turned off. If it still disconnects, then I would try connecting another bluetooth device to the prime, to check if that is the problem. Also, if you haven't, try to reboot. If it still doesn't work, then you might have to use the USB cable.
Click to expand...
Click to collapse
Thanks one more time for your Help ,
"Have paired to:" NOTHING ?! ( see at the PIC please )
i connect it with the cable and press "Pair Controller" in the Sixaxis app
Sixaxis says =
Listening for Controllers.....
Master address updated
now when i Press my PS3 Button the Transformer goes to the HomeScreen ?
FIRST W-lan is not on ........
okay now i have install the Driver it connect toMotioninJoy and i have PAIR it to the Adress , but now when i start Sixaxis , it "Listening for Controllers ....."
i press the "P3 " button - the controller lights all 4 Blinks and....
Nothing (Sixaxis) Listening for Controllers .....
and the Controller s lights STOP blink ;(
EDIT 1:
okay i don´t now what i done but now the Sixaxis APP says one more time
Client connected: 1 ( The PS3 controllers lights are Blinking all 4 ! )
some seconds later ....
Client disconected : 1 ( The PS3 Controllers Lights are NOT blink )
THE CONTROLLER PS3 is not ORIGINAL , do you think thats the Problem ?
some one how can help PLS ?
WTF ;( ?
Try this and tell me if it works:
1. Plug controller in with USB port connected.
2. Play around with it to make sure it works for a bit.
3. Push the Playstation button and unplug it from the USB at the same time.
Weird, but it works for me, lol.
If you bought a cheap ps3 controller off ebay it might be the problem, yes. It should be super easy you see, so there might be something wrong with the controller. I'm assuming you don't have the dock, so you are not able to test if it works on the prime using usb?
When you are pairing it, this is how it should look like:
I don't have Sixaxis installed, it's unrooted, and it works fine with bluetooth. I don't know why you're going through the trouble of using Sixaxis at all.
Ov3rbyte said:
Try this and tell me if it works:
1. Plug controller in with USB port connected.
2. Play around with it to make sure it works for a bit.
3. Push the Playstation button and unplug it from the USB at the same time.
Weird, but it works for me, lol.
Click to expand...
Click to collapse
That actually worked lol, what the? xD Halljo, try this! Bluetooth has to be on of course.
Try it without bluetooth on too and tell me if it works please Kidio007.
Ov3rbyte said:
Try it without bluetooth on too and tell me if it works please Kidio007.
Click to expand...
Click to collapse
Tried 7 times, doesn't work for me when I turn off bluetooth. If it works for some with it off, then it's just a glitch probably.
I'm guessing it's a glitch, they fixed it in the update that I got I bet. Now it shows up in the actual bluetooth controllers in bluetooth settings, Woot! It caused reboots and i'm sure it was linked to that.
You conecct it without an app? If i want to pair manual it dont works .i have to do any settings in sixaxis ? Profil or anything?
Gesendet von meinem GT-I9100 mit Tapatalk
ok, first i had to wat da hell?
The knockoff PS3 controllers like the one you got from ebay DO NOT WORK. i learned that the hard way too. Something with how they authenticate, it works for a PS3 but barely, i can connect it to my computer and use it as a controller for that, but for sixaxis controller on my tablet, no way.
Spend the money, buy a real controller. Used game places, pawn shops, i found one with the old packaging at my local TheSource store (TheSource.ca) for like, 15% off. I bought it, it works awesome.
As far as apps go, sixaxis controller is the way to go. Pay the couple of bucks, its worth it. Actively updated, new features seemingly every other week. just do it. you wont be sorry.
As far as getting the controller to connect:
Get this app:
https://market.android.com/details?id=com.dancingpixelstudios.sixaxiscontroller&hl=en
Go to here and download the sixaxis pair tool:
http://www.dancingpixelstudios.com/sixaxiscontroller/tool.html
Other apps can do the same thing, i have used the one in the screenshots previous, however it reverses the mac address. Just use the one i linked, it works with no hassle.
Plug in sixaxis controller to your computer, use the tool to change the mac address.
Start the app on your tablet, it will turn off bluetooth if its on so no need to worry about that. start your sixaxis controller, it should connect pretty much no problem (as long as its genuine, if its a knockoff good luck)
The latest version of the app has a USB pair ability, you can connect your controller via USB and that, for whatever reason, worked on my knockoff controller. weird.
Hope this helps, i know its not the news your looking for. As of yet i cant find anything to get my cheap controller connected, aparently it uses nonstandard meathods for connecting to the PS3 so theres no definate way to make it work 100%.
Thanks for that i buy one and test it later.
I have to change the controller settings game by game ? Also for GTA one and other for shadowgun? Do you can send me your settings if i need it.
Thanks guys for your help
Gesendet von meinem GT-I9100 mit Tapatalk
One more problem is that when i change the input method to sixaxis and change back to hackers keyboard . The keyboard DON'T shows up
I have to restart the prime and sometimes it helps
Gesendet von meinem GT-I9100 mit Tapatalk
the trick of pushing the ps button and unplugging works for me too (without bluetooth on)
i have not turned bluetooth once since i got my prime and this little glitch works for me, and im not rooted
with the orginall PS3 controller works \fine jihaaaaa
but not vibrat. can i change that
Hello!
I recently bought a playstation 3 controller to use with my PC and emulators on my Tablet. I discovered that without root i wasn't able to fully utilize the controller on my tablet.
I got to work and rooted my tablet, bought sixaxis controller and set it up. I am now able to connect with the app and bind keys in the emulator with the app. However when i exit the key-binding menu and begin to play a game the emulator suddenly doesn't recognize any of my button presses made with the app.
I made a touch profile so that i could play but i really want to be able to play without this touch profile.
I've googled with no results for days and i now ask you, what do you think is wrong? And how can i fix it?
Which emulators are you using this with? With some of them you have to set up the bindings in the emulator app.
If you bought a cheap ps3 controller on ebay it will not work. If you buy a legit PS3 controller it will work. Common problem, aftermarket controllers have a slightly different bluetooth profile that its kind of goofy...
If you have a legit controller then it must be other settings!
Lets start from the beginning.
FIRST TIME! If its your first time pairing the controller to the tablet you need to get a USB cable and plug it into the dock.
Start up the app
press the "pair controller" button. This tells the controller which address to connect to. If you dont do this then the controller is looking for a PS3 which your tablet obviously is not.
If it is NOT your first time, or you have used the PC utility to manually change the bluetooth address on the controller
Start up the app
Press Start
Turn on the controller
Remember, you must change the IME (input) from whatever keyboard you have to sixaxis.
Once you see the message in the window say you are paired press the up down left right buttons on the ps3 controller, you SHOULD see things happen on the screen. If not you did something wrong.
If you want to use touch profiles select it from the box
If the above does not work check with the PC utility that your controller is trying to pair to the correct bluetooth address. Note sometimes the sequence is reversed - 12:23:34:45:56:67 can sometimes be 67:56:45:34:32:12. Different applications on the PC work differently.
Make sure you are using the latest LEGIT copy. If you are pirating this software it likely wont work. Check on the market you are updated to the latest version.
If all else fails, contact the developer or check the developers website. I know it works with the prime im running it on mine, works great!
Good luck!
EDIT
Re-reading OP i'd say it sounds like you forgot to change the IME. Maybe check that first
pileot said:
If you bought a cheap ps3 controller on ebay it will not work. If you buy a legit PS3 controller it will work. Common problem, aftermarket controllers have a slightly different bluetooth profile that its kind of goofy...
If you have a legit controller then it must be other settings!
Lets start from the beginning.
FIRST TIME! If its your first time pairing the controller to the tablet you need to get a USB cable and plug it into the dock.
Start up the app
press the "pair controller" button. This tells the controller which address to connect to. If you dont do this then the controller is looking for a PS3 which your tablet obviously is not.
If it is NOT your first time, or you have used the PC utility to manually change the bluetooth address on the controller
Start up the app
Press Start
Turn on the controller
Remember, you must change the IME (input) from whatever keyboard you have to sixaxis.
Once you see the message in the window say you are paired press the up down left right buttons on the ps3 controller, you SHOULD see things happen on the screen. If not you did something wrong.
If you want to use touch profiles select it from the box
If the above does not work check with the PC utility that your controller is trying to pair to the correct bluetooth address. Note sometimes the sequence is reversed - 12:23:34:45:56:67 can sometimes be 67:56:45:34:32:12. Different applications on the PC work differently.
Make sure you are using the latest LEGIT copy. If you are pirating this software it likely wont work. Check on the market you are updated to the latest version.
If all else fails, contact the developer or check the developers website. I know it works with the prime im running it on mine, works great!
Good luck!
EDIT
Re-reading OP i'd say it sounds like you forgot to change the IME. Maybe check that first
Click to expand...
Click to collapse
It's a real controller and i did change the IME.
I am primarily using the N64 emulator. When i map the keys without sexaxis controller installed most of the keys are named <unknow>. When i start sixaxis controller i get "DPAD_START" or something similar when i map the keys. (after enabeling the IME).
So the connecting and mapping goes perfect. But somehow when i exit the settings and start to play it wont detect the keys anymore.
It's quite late now, i will test everything again tomorrow to make sure the problem is still there. But i truly don't know what to do.
I don't know about the emulator you're using, but in NESoid, and SNESoid etc to use sixaxis with it, theres an option in menu>settings>Other settings>"Use Input Method" Enable special input device eg bluetooth gamepad - This needs checked for the controller to work see if this is enabled on yours
NeoMagus said:
I don't know about the emulator you're using, but in NESoid, and SNESoid etc to use sixaxis with it, theres an option in menu>settings>Other settings>"Use Input Method" Enable special input device eg bluetooth gamepad - This needs checked for the controller to work see if this is enabled on yours
Click to expand...
Click to collapse
THANK YOU!
In "other settings" i just had to click that. ****ing awesome m8 Thanks
No prob man I figured thats what it might be frustrated the hell out of me too
Sent from my SCH-I535 using XDA
Ya its kind of annoying because with sixaxis you can have it set for controller input, emulate keyboard, or sort of a hybrid (like the experia play does with its keys), different apps deal with these things differently, its just a matter of finding a method that works best for the app your using.
Glad to hear you got it working!
Thank you
I only rooted to use the controller, I was getting frustrated
Sent from my GT-I9300 using xda premium