Is there a way to update from froyo to gingerbread though odin on my y-g1 (intl) because kies just isnt working for me.
TheFro74 said:
Is there a way to update from froyo to gingerbread though odin on my y-g1 (intl) because kies just isnt working for me.
Click to expand...
Click to collapse
Flash this tar through Odin:
XXKPQ Download
simple use the tar from the second post and put it in the pda section then if odin sees your player you will get a yellow area then click start and wait for it to complete the process : )
thanks guys
Related
I have a Samsung I9300, I'm in the US, and and on T-Mobile, it has the stock ROM, but rooted with Chainfire's CF-Root 6.4. The S3 has downloaded the OTA Jellybean update, and I have postponed it for now. My question is, can I apply the update ? and then just re-root with CF-Root, or will the update fail?
Thanks
I wouldn't apply the ota as it can fail with any root applied incl cf root. You could update through kies and reapply cf root or flash the official firmware for your phone through Odin. If ya need a hand finding out which official firmware ya need do the following:-
Dial *#1234# into your keypad and post results.
Sent from my GT-I9300 using xda premium
It shows:
AP: I9300UBBLG2
CP: I9300UBLG2
CSC: I9300UUBBLG2
I believe that firmware is Brazilian but using sammobile.com to check for brazilian versions I dont see a JB update for any of the brazilian carriers handsets or the unbranded version :/
If u have kies you could do the update through it, it updates the same as if u flash through odin and wont wipe anything. You could also use "checkfus" from playstore it should identify your phone and firmware version and allow u too download.
I had a similar problem, and I thought I could try to get Jelly Bean by flashing a custom Jelly Bean ROM. Now I want to go back to stock ROM (flashed custom ROM's performance is awful), so I downloaded the corresponding stock ROM from sammobile, but what I found was a very large (1,2Gb) tar.md5 file and a SS_Dl.dll file.
So the question; is it normal for it to be that big? and, how do I flash it with odin... which thing goes where? which pit should I use? do I put the 1,2Gb file in PDA? should I tick re-partition? bootloader?? Please, help
(Current ROM is DarkyROM III v6.0, and my android phone is a spanish yoigo i9300, so according to sammobile my stock is I9300XXBLFB_I9300YOGBLF1_YOG)
Myscha said:
I had a similar problem, and I thought I would try a Custom jellyBean ROM. Now I want to go back to stock ROM, so I downloaded the corresponding stock ROM from sammobile, but what I found was a very large (1,2Gb) tar.md5 file.
So the question; is it normal for it to be that big? and, how do I flash it with odin... which thing goes where? which pit should I use? do I put the 1,2Gb file in PDA? should I tick re-partition? bootloader?? Please, help
(Current ROM is DarkyROM III v6.0, and my android phone is a spanish yoigo i9300, so according to sammobile my stock is I9300XXBLFB_I9300YOGBLF1_YOG)
Click to expand...
Click to collapse
Go here - This is a guide for using Odin etc -
http://forum.xda-developers.com/showthread.php?t=1671969
badassballer said:
Go here - This is a guide for using Odin etc -
http://forum.xda-developers.com/showthread.php?t=1671969
Click to expand...
Click to collapse
Much appreciated, I'll try not to break anything
Myscha said:
Much appreciated, I'll try not to break anything
Click to expand...
Click to collapse
No problem! Enjoy!
OK, a slight variation on the question:
S3 I9300 on T-mobile, stock ROM, rooted w/ CF 6.4. Can I use Mobile Odin Pro to flash the JB update that the phone has downloaded (update.zip sitting in /cache) checking everoot to keep root, and do the update this way, rather than using kies to update and the re-root?
And if so, what happens to the CWM recovery that is installed, does it get over written with stock recovery?
Thanks
Hi im a noob. i got my s3 in the past 2 days, i have a problem about my battery.. it last 24 hours or less. im on stock.. how to update or root this phone? anyone could help me.
Android version: 4.0.4
Baseband version: I9300DXLH1
Kernel version 3.0.15-928452
THANKS
iamjavin said:
Hi im a noob... how to update or root this phone? anyone could help me.
Click to expand...
Click to collapse
Hi nOObie, I used to be a [email protected]@b like you but there are a lot of tutorials how to root an s3. Especialy you can search it on Youtube. I followed this tutorial video http://www.youtube.com/watch?v=kbzMHVdV_Vc and got my s3 rooted. You do the same as well.
Cheers
I'm using i9003dxlh1 (rooted) .. Wanted to upgrade to jellybean.. But.... Using software update (in the phone settings) and finish downloaded.. And install.... BUT nothing happens.... But... My message font becoming bigger.... Version of the firmware is still 4.0.4... Pls help
Sent from my GT-I9300 using xda premium
Bassicly this is what i need to do.
i keep getting status 7 code when i try to update in CWM.
Phone details:
GT-19300
4.0.4
Build number: IMM76D.I9300XXBLFB
Can anybody point me in the right direction?
Galaxy S4? Anyway, try flashin the tar version using odin?
Sent from my GT-I9300 using xda premium
xcly said:
Galaxy S4? Anyway, try flashin the tar version using odin?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
What do you mean exactly sorry im very noob at this.
tanab said:
What do you mean exactly sorry im very noob at this.
Click to expand...
Click to collapse
What are you trying to update in CWM not a tar file that should be flashed via Odin ???
BASICS
http://forum.xda-developers.com/showthread.php?t=1927113
jje
JJEgan said:
What are you trying to update in CWM not a tar file that should be flashed via Odin ???
BASICS
http://forum.xda-developers.com/showthread.php?t=1927113
jje
Click to expand...
Click to collapse
Just want to upgrade my rooted SGS3 4.0.4 Rooted to SGS3 4.1.1 Rooted. How can i go and do this?
can i just find rooted stock rom 4.1.1 and take it into Odin?
tanab said:
Bassicly this is what i need to do.
i keep getting status 7 code when i try to update in CWM.
Phone details:
GT-19300
4.0.4
Build number: IMM76D.I9300XXBLFB
Can anybody point me in the right direction?
Click to expand...
Click to collapse
The Galaxy S IV is a non-existent phone, which we all would love to get our hands on
Have you tried updating using Kies, or Odin?
If you haven't, you may aswell. If Kies says you cannot upgrade, try downloading the TriangleAway app, from Chainfire and trying again. If that still doesn't work, un-root and then do it.
If you don't like Kies (Like me) then download Odin from http://sammobile.com/firmware and then downloading original firmware from there. You can delete the recovery partition out of the tarball, so CWM stays put If you don't want to muck around with the firmware, update, flash CWM, root again
Hope I could help!
LG familyguy59/Beatsleigher
Get a 4.1.1 firmware from a firmware site (there's threads in general listing all official and leaked firmwares).
Those threads should give a brief explanatikn as to how to flash the firmwares listed.
Some zips are just zipped .tar files with odin. Just extract, and use the odin software to flash whatever .tar file that's there (or was it .md5 file?)
Threads with title cwm or.zip file will require flashing via cwm. Never tried this method so don't trust me on this. I just get my updates via .tar through odin.
All the info is there if you look for it really..
Sent from my GT-I9300 using xda premium
Okay now I have installed this Unofficial 4.1.2 Jelly Bean Kernel XXLS6 on my S2 , and couple of days ago I heard that the official Firmware is to be available on Kies in the next few weeks, so what I did is I downloaded the Stock 4.0.3 ICS through searching my country's Rom on Samfirmware.net and it was a 500+ Mbs *.tar.md5 file.. So I want to know do I just flash it on PDA through Odin? I'm having doubts because when I flashed this unofficial firmware I'm having now I actually had to use 3 files the MODEM, the CODE and the CSC. SO I just need to know is that one file just enough or not?
This is the name of the File: I9100JPLPF_I9100OJPLPC_I9100XXLPX_HOME.tar.md5
Thank you.
Yes. All you need is the md5 and flash it via PDA section.
TheATHEiST said:
Yes. All you need is the md5 and flash it via PDA section.
Click to expand...
Click to collapse
Are all the applications going to be wiped? and if yes, is there anyway I could get them back?
titanium back up works like a charm.
Sent from the little guy
i have flashed official ics 4.0.4 in samsung galaxy s ii . since i m unable to download the firmware via samobile. i have to update it using kies now. so is there any way to show up my samsung galaxy s ii samsung kies . it shows up in kies but the update shows firmware not recognised like it shows up XXX in firmware name.plz any one knows how to solve thiis problem
suhag said:
i have flashed official ics 4.0.4 in samsung galaxy s ii . since i m unable to download the firmware via samobile. i have to update it using kies now. so is there any way to show up my samsung galaxy s ii samsung kies . it shows up in kies but the update shows firmware not recognised like it shows up XXX in firmware name.plz any one knows how to solve thiis problem
Click to expand...
Click to collapse
If you have flashed a firmware of your country than only kies can show u official updates
Rom : MIUI V5
Kernel : HIROX V5 INTENSIVE
Modem : NELP2
click THANKS if you think my post was HELPFUL
Shahan_mik3 said:
If you have flashed a firmware of your country than only kies can show u official updates
Rom : MIUI V5
Kernel : HIROX V5 INTENSIVE
Modem : NELP2
click THANKS if you think my post was HELPFUL
Click to expand...
Click to collapse
i know buddy but it shows ur firmware is not upgradible
And is there any way to solve it
y not download from torrent ???
suhag said:
And is there any way to solve it
Click to expand...
Click to collapse
once you flashed a firmware via odin, kies will not be able to update your device until you go back to the firmware that was last
recognized by kies. To achieve this there are several steps necessary.
So the onliest thing you can do is to go back or find another way to download your desired firmware.
You can also get most firmwares from here. .....
http://samsung-updates.com/
Sent from my Rooted, De bloated Stock JB powered S2 via PhilZ kernel and Tapatalk 2....
suhag said:
i have flashed official ics 4.0.4 in samsung galaxy s ii . since i m unable to download the firmware via samobile. i have to update it using kies now. so is there any way to show up my samsung galaxy s ii samsung kies . it shows up in kies but the update shows firmware not recognised like it shows up XXX in firmware name.plz any one knows how to solve thiis problem
Click to expand...
Click to collapse
Try downloading your desired firmware from http://www.sammobile.com and flash it via odin. Hope i helpt
Christonio said:
Try downloading your desired firmware from http://www.sammobile.com and flash it via odin. Hope i helpt
Click to expand...
Click to collapse
Seriously read the post again :banghead::what::thumbdown:
Rom : MIUI V5
Kernel : HIROX V5 INTENSIVE
Modem : NELP2
click THANKS if you think my post was HELPFUL
hi my i9100 is runing stock 4.0.3,oga updater says no update available,i need 4.1.2 update for this phone,details are
pda:I9100JPLPC
CSC:I9100JPLP9
PHONE/MODEM: I9100 XXLPW
please provide me 4.1 stock rom for manual flashing via odin,thanks
Get the stock rom you need from Samfirmware, flash it with Odin following the instructions in the thread stickied near the top of Q&A entitled '[GUIDE][ICS/JB] 11/03 - Flash Stock firmware'
Can i flash software via odin using windows8 64bit?
I have windows 8 pro 64bit, odin 3.07 will flash on it correctly or i need win 7 or xp?,
No idea, I don't have Win8; try it & find out. Every version of Odin I've tried has worked perfectly on Win7x64 though.
MistahBungle said:
No idea, I don't have Win8; try it & find out. Every version of Odin I've tried has worked perfectly on Win7x64 though.
Click to expand...
Click to collapse
No problems on win 8 for me.
Hi
It will work without files?