howdy,
I just got this i9100 with the kernel : 2.6.35.7-i9100XWKDD-CL161513 [email protected] #2.
I'd like to put cfroot and clockword etc.. on it but I got a little bit confused.
From what I understand I have to put a newer version kernel on it with similar name "XWKDD".
I tried to find a similar one in the chainfire thread http://forum.xda-developers.com/showthread.php?t=1103399 but i couldnt manage.
So basically my question is which kernel do I use if I want to put a miui or resurrection remix or any 4.1 ROM on it?
Can i just put this Dorimanx one on it via Odin? That seems to work with everything?!
http://forum.xda-developers.com/showthread.php?t=1617219
Also the phone is running stock 2.3.3, rooted but it doesnt have custom recovery.
One more thing if I put another another kernel on it, the I mentioned for example, will it still run the stock Gingerbread?
Thank you in advance
I recommend you to upgrade your phone to ICS, then flash custom kernel and ROM.
przemcio510 said:
I recommend you to upgrade your phone to ICS, then flash custom kernel and ROM.
Click to expand...
Click to collapse
Well I tried to update it with Kies, but the bloody thing just crashed on me so I'm pretty afraid of that evil program.
Can I upgrade the official ICS with Odin too?
Also if I do it with Odin is it enough if I only put the ROM on it? Does that update the kernel too (same for the kies if i try again with that, that updates the kernel too?)?
Btw i couldnt find a stock kernel with this code that mine has
elfboci said:
howdy,
I just got this i9100 with the kernel : 2.6.35.7-i9100XWKDD-CL161513 [email protected] #2.
I'd like to put cfroot and clockword etc.. on it but I got a little bit confused.
From what I understand I have to put a newer version kernel on it with similar name "XWKDD".
I tried to find a similar one in the chainfire thread but i couldnt manage.
So basically my question is which kernel do I use if I want to put a miui or resurrection remix or any 4.1 ROM on it?
Can i just put this Dorimanx one on it via Odin? That seems to work with everything?!
Also the phone is running stock 2.3.3, rooted but it doesnt have custom recovery.
One more thing if I put another another kernel on it, the I mentioned for example, will it still run the stock Gingerbread?
Thank you in advance
Click to expand...
Click to collapse
Siyah all the way for the S2
cypherrom666 said:
Siyah all the way for the S2
Click to expand...
Click to collapse
Siyah won't work on GB. you can upgrade to stock ICS via Odin. Download a 4.0.3 firmware for your device from sammobile.com and install via Odin. Then flash a custom kernel. For the ROMs you mentioned, siyah is preferable simply since dorimanx has a couple of versions. And determining which version will support which ROM might get a little confusing if you're just starting out. Just my opinion, start off wit siyah, then can switch over to dorimanx later when you figure out which versions support which ROMs.
Good luck. :thumbup:
EDIT: yes, just installing the ROM (firmware) is enough. It'll include the stock ICS kernel along with it.
Sent from my GT-I9100 using xda app-developers app
HAXTREME said:
Siyah won't work on GB. you can upgrade to stock ICS via Odin. Download a 4.0.3 firmware for your device from sammobile.com and install via Odin. Then flash a custom kernel. For the ROMs you mentioned, siyah is preferable simply since dorimanx has a couple of versions. And determining which version will support which ROM might get a little confusing if you're just starting out. Just my opinion, start off wit siyah, then can switch over to dorimanx later when you figure out which versions support which ROMs.
Good luck. :thumbup:
EDIT: yes, just installing the ROM (firmware) is enough. It'll include the stock ICS kernel along with it.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I found the Siyah 4.1.5 kernel I assume this is it, http://www.gokhanmoral.com/gm/2012/09/08/siyahkernel-s2-v4-1/, does it put custom recovery and root on it automatically?
Yes.but first you'll have to be on ICS.
Sent from my GT-I9100 using xda app-developers app
HAXTREME said:
Yes.but first you'll have to be on ICS.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
does it matter which regional ICS i download? I mean, the guy i bought it from said its originally unlocked, but at boot UK O2 pops up /im not using O2 tho so it seems to be true, im just sayin .
Not so much. The only difference between firmwares for different regions is the modem. If after rooting you find your signal isn't as good as it was earlier, you can always flash a different modem at a later stage.
Sent from my GT-I9100 using xda app-developers app
Thanks for the help, worked like a charm <3
elfboci said:
Thanks for the help, worked like a charm <3
Click to expand...
Click to collapse
hmm after installing Resurrection remix, my PC just cant connect to the storage, even tho it recognizes it but it says cant find hardware identifier, it only says only samsung mobile usb composite device
USB debugging is turned on
Related
Just one short question so I dont do something stupid: do I need to do some kind of procedure or anything before I flash Siyah 3.0.1.? The phone has ALL stock software and settings and hasn't been tampered like this in any way as its only several days old.
Thanks in advance.
bad move. 3.0.1 is for ics rom. You are likely to be on gingerbread.
Verstuurd van mijn GT-I9100 met Tapatalk
If you have not installed CWM, you can just install it via Odin. Also make sure that you actually have ICS (android 4.XX) installed on your phone or it wont work.
Just to confirm, you have the i9100? Not the US T-mobile version of SGS2?
jelle2503 said:
bad move. 3.0.1 is for ics rom. You are likely to be on gingerbread.
Verstuurd van mijn GT-I9100 met Tapatalk
Click to expand...
Click to collapse
Yeah I'm on Gingerbread, all stock. Should I flash 3.0 instead?
And I still dont know is there something to do, some kind of procedure or something before the flashing.
Here it says it already needs to be rooted before the flash...
http://www.inspiredgeek.com/2011/11...recovery-battery-life-screen-sensitivity-fix/
Kaze105 said:
If you have not installed CWM, you can just install it via Odin. Also make sure that you actually have ICS (android 4.XX) installed on your phone or it wont work.
Just to confirm, you have the i9100? Not the US T-mobile version of SGS2?
Click to expand...
Click to collapse
Yeah, international version, GT i9100
boki9999 said:
Yeah I'm on Gingerbread, all stock. Should I flash 3.0 instead?
And I still dont know is there something to do, some kind of procedure or something before the flashing.
Here it says it already needs to be rooted before the flash...
http://www.inspiredgeek.com/2011/11...recovery-battery-life-screen-sensitivity-fix/
Click to expand...
Click to collapse
do not install that siyah 3 kernel if you are still on gingerbread. You have 2 options. Install siyah 2.6.14 for gingerbread, or upgrade your current rom to ICS and then install siyah 3.
So, for example I could go with Speedmod or CfRoot, flash some Ics rom(Miui for example) and then flash Siyah?
If you want to stay on gingerbread and use siyah, use siyah 2.6.14 or lower. If you want to go to ICS, use siyah 3.0 or higher. It's that simple. 2.6.x only works on gingerbread, and 3.x only works on ICS.
just flash recovery
boki9999 said:
So, for example I could go with Speedmod or CfRoot, flash some Ics rom(Miui for example) and then flash Siyah?
Click to expand...
Click to collapse
If its brand new and stock, first root (zergrush method), flash CF-Root using odin, get ClockWorkMod (using rom manager from market).
After that you can go ahead and flash any ICS rom but first backup everything.
So backup contacts (I just go to contacts and from menu use export to SD card), sms (using any sms backup app from market), all the apps you would like to save for later use with Titanium Backup (free addition is fine).
Also do a back for your stock rom in recovery (I suppose you can do that even before rooting - but I did it after I rooted and got CF-Root kernel).
Hope it helps.
Thanks a lot!
But doesnt Cf Root already come with CWM?
And is this the right method?
http://forum.xda-developers.com/showthread.php?t=1321582
Sent from my GT-I9100 using XDA
boki9999 said:
Thanks a lot!
But doesnt Cf Root already come with CWM?
And is this the right method?
http://forum.xda-developers.com/showthread.php?t=1321582
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Easy way to root is with odin. Look here http://forum.xda-developers.com/showthread.php?t=1103399
That guy is great, but what's creating a confusion about Siyah is FAQ on his page:
Q: Does this kernel work on XXXXXX-ROM?
A: If the ROM is based on Samsung Stock ICS Rom LPQ or newer, it should. Otherwise, search the thread... If you cannot find any reference to that ROM, try the kernel. You won't lose anything by trying this kernel. Worst case scenario is to reflash your previous kernel or ROM. You can backup your previous kernel with Hellcat's k-tool from the market.
So, I tried with 3.0 on my GB 2.3.4., and it didn't work, so I had to flash old kernel.
The reason I want to use Siyah is dual-boot, which it should provide.
Another problem is that ICS comes very slowly.
Siyah V3 doesn't work with Gingerbread roms. It's an ICS kernel. Try Siyah 2.6.14, that's the GB version (look for the thread in the dev section).
I'm still so confused about all of this and can't decide what to do. In addition, there is no cf-root for my kernel(BOKK1).
From the CFRoot thread "What if there is no matching download ? Try finding the closest match." & "The XX and OXA identifiers are not that important" (in your case the BO).
boki9999 said:
I'm still so confused about all of this and can't decide what to do. In addition, there is no cf-root for my kernel(BOKK1).
Click to expand...
Click to collapse
TimAnd said:
That guy is great, but what's creating a confusion about Siyah is FAQ on his page:
Q: Does this kernel work on XXXXXX-ROM?
A: If the ROM is based on Samsung Stock ICS Rom LPQ or newer, it should. Otherwise, search the thread... If you cannot find any reference to that ROM, try the kernel. You won't lose anything by trying this kernel. Worst case scenario is to reflash your previous kernel or ROM. You can backup your previous kernel with Hellcat's k-tool from the market.
So, I tried with 3.0 on my GB 2.3.4., and it didn't work, so I had to flash old kernel.
The reason I want to use Siyah is dual-boot, which it should provide.
Another problem is that ICS comes very slowly.
Click to expand...
Click to collapse
Hmmm. I think I answered this...
MistahBungle said:
Siyah V3 doesn't work with Gingerbread roms. It's an ICS kernel. Try Siyah 2.6.14, that's the GB version (look for the thread in the dev section).
Click to expand...
Click to collapse
Deja vu! I said the same thing on page 1! (no offense, MB. Meant for the other dude)
Did you ? Sorry CTM, didn't read the first page :-( Just saw the 'query' at the top of this page.
ctomgee said:
Hmmm. I think I answered this...Deja vu! I said the same thing on page 1! (no offense, MB. Meant for the other dude)
Click to expand...
Click to collapse
boki9999 said:
I'm still so confused about all of this and can't decide what to do. In addition, there is no cf-root for my kernel(BOKK1).
Click to expand...
Click to collapse
You can use the kk2 CF root kernel.
TimAnd said:
The reason I want to use Siyah is dual-boot, which it should provide.
Click to expand...
Click to collapse
Siyah Kernel up to 3.01 (which is for ICS as you are already told) up to now does not support dual boot! Its only a placeholder till now in CWM. It may support dual boot in future but not now.
Hi i would like to ask how to install any cynanogen or aosp rom on a gingerbread 2.3.5 stock samsung rom with spdmod kernel cwm. Thanks.
sent from my GT-I9100
i'm a noob. sorry.
...
With all due respect sir. I can ask this question. I rooted my first android phone because of xda. I also learned how to flash my first windows phone here at xda years ago by asking questions like this one. I'm sorry if your eyes sore when you see noob like me. And i'm asking for specific parameters like android ver 2.3.5 with speedrom . I can't find any posts that match like that one.
sent from my GT-I9100
i'm a noob. sorry.
...
Yes clear. So the things that i have to do is
Revert to stock kernel
Apply cf kernel cwm
Install rom aosp or any other?
Right sir? Thanks
sent from my GT-I9100
i'm a noob. sorry.
Just flash CM9 in CWM. It will also install CM9 ICS kernel so you're good to go. Maybe you'll need to flash another modem in case your GB modem doesnt work with ICS.
After that, I would recommend to flash Siyah kernel, but its up to you.
P.S. DO NOT EVER USE ROM MANAGER (it comes with CM9)
Sent from my GT-I9100
boki9999 said:
Just flash CM9 in CWM. It will also install CM9 ICS kernel so you're good to go. Maybe you'll need to flash another modem in case your GB modem doesnt work with ICS.
After that, I would recommend to flash Siyah kernel, but its up to you.
P.S. DO NOT EVER USE ROM MANAGER (it comes with CM9)
Sent from my GT-I9100
Click to expand...
Click to collapse
Directly ? With speedmod kernel cwm? Thanks
sent from my GT-I9100
i'm a noob. sorry.
Hello.
This is the first time I try to root an Android device (Samsung Galaxy SII, Andoird 4.0.3, Kernel 3.0.15-I9100XWLP7-CL340913 [email protected] #3, Buildnumber IML74K.XWLP7)
I've tried to figure out which kernel I have to use and I think found the right one but I'm not 100% sure.
So, can anybody tell me if this is really the right kernel:
CF-Root-SGS2_DX_XTC_LP7-v5.4-CWM5.zip: download.chainfire.eu/154/CF-Root/SGS2/CF-Root-SGS2_DX_XTC_LP7-v5.4-CWM5.zip
Many thanks in advance!
By the way: What would happen if I choose the wrong kernel?
rubikon4711 said:
I've tried to figure out which kernel I have to use and I think found the right one but I'm not 100% sure.
Click to expand...
Click to collapse
Siyah v3.x should work fine, not sure about 4.x and later because some were made for 4.0.4 where were changes according to camera and issues backwards for 4.0.3.
rubikon4711 said:
CF-Root-SGS2_DX_XTC_LP7-v5.4-CWM5.zip: download.chainfire.eu/154/CF-Root/SGS2/CF-Root-SGS2_DX_XTC_LP7-v5.4-CWM5.zip
Click to expand...
Click to collapse
Should be fine, anyway any kernel from 4.0.3 ROM would fit, I was using XXLP7 with XXLPG kernel and no problems at all. They will work unless not different codes ex UHLPZ with XWLPW ROM.
rubikon4711 said:
By the way: What would happen if I choose the wrong kernel?
Click to expand...
Click to collapse
Device won't boot, recovery will be available (stock e3 or if available cwm), some features won't work, as camera described above... nothing that can harm your device, just keep in mind some kernels are unsafe to wipe via cwm recovery, everything can be reflashed back with odin.
Thank you very much for your quick reply!
I would recommend starting with Chainfire's LP7 kernel. It's safe and you'll get root. From there you can research into and try other kernels.
Sent from my GT-I9100 using xda premium
Before I go into flashing kernel I have a question to ask. Which kernel that is compatible to the att 4.0.4? Just want to make sure before I flash it through Odin Mobile Lite.
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
Are you wanting a kernel to use in place of the stock one for everyday use? Or are you wanting a kernel with CWM to flash a new ROM?
Sent from my SGH-I777 using xda premium
Red_81 said:
Are you wanting a kernel to use in place of the stock one for everyday use? Or are you wanting a kernel with CWM to flash a new ROM?
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
With CWM to flash a new ROM that also compatible for stock one. If any.
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
Your best bet is the Siyah kernel.
http://forum.xda-developers.com/showthread.php?t=1592228
You should be able to flash this zip in mobile Odin.
Sent from my SGH-I777 using xda premium
Thanks. I'll try it.
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
I just noticed you said lite. Lite won't flash the zip. You will need to unzip the zimage file first.
Sent from my SGH-I777 using xda premium
Thanks again.
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
help please
I have an i777 that absolutely refuses to allow CWM. I have tried Siyah kernel on both GB and ICS stock roms, as well as AJK kernel on JB stock from. I am far from giving up but this has caused me so much headache and I've never bricked a phone as much as I've done this. Needless to say, I've learned a lot but I have yet to figure it out. If anyone could offer some advice or things to try I certainly would appreciate it.
I am currently running stock 4.0.3 with Siyah 4.3.3 kernel.
travis.hamra said:
I have an i777 that absolutely refuses to allow CWM. I have tried Siyah kernel on both GB and ICS stock roms, as well as AJK kernel on JB stock from. I am far from giving up but this has caused me so much headache and I've never bricked a phone as much as I've done this. Needless to say, I've learned a lot but I have yet to figure it out. If anyone could offer some advice or things to try I certainly would appreciate it.
I am currently running stock 4.0.3 with Siyah 4.3.3 kernel.
Click to expand...
Click to collapse
Assuming your phone is in fully working condition, then there is evidently something you are missing in your understanding of how the phone works. The SGH-I777 is different in that the recovery is built in to the kernel, and *not* installed separately in it's own partition. From reading the above, I'm wondering if your are trying to install a separate recovery, or if you art trying to install ClockworkMod from the play store by installing Rom Manager?
To help you get through this, I need to know exactly what you are doing that is not working for you, in a step by step explanation.
Thank you for your reply. I had feared this was a dead thread.
I am aware that custom recovery is embedded in the kernels themselves and not a standalone as I have encountered with my Hercules.
As for what I have tried. From manager from play store will flash 100% but never give me a complete notice which, I believe, is a successful download but not flash.
As far as kernels are concerned. I have used ones that are compatable with stock rooms. I've tried a couple that don't. All have failed to yield me with my desired result.
Is there a piece of code that I can modify to get the kernel embeded recovery to kill stock Sammy?
travis.hamra said:
Thank you for your reply. I had feared this was a dead thread.
Click to expand...
Click to collapse
The phone is pretty old, and not many people hang out here any more. I still check in every once in a while. You would get more attention in any forum if you post a new thread with your question, rather than necro-ing an old thread.
I am aware that custom recovery is embedded in the kernels themselves and not a standalone as I have encountered with my Hercules.
As for what I have tried. From manager from play store will flash 100% but never give me a complete notice which, I believe, is a successful download but not flash.
Click to expand...
Click to collapse
I assume you meant to type "Rom" manager? Rom manager should not be used on the I777. For reference, see the very top sticky thread in the Q&A forum (this forum) [A] Rom Manager ******WARNING READ THIS BEFORE******
As far as kernels are concerned. I have used ones that are compatable with stock rooms. I've tried a couple that don't. All have failed to yield me with my desired result.
Click to expand...
Click to collapse
All custom kernels built for the I777 come with a recovery either based on CWM recovery or TWRP recovery. These kernels are usually compatible with the stock system which matches their version number. Once you install the custom kernel to replace the stock kernel, you will be able to enter recovery and it will be CWM (or TWRP in a few cases).
For Gingerbread, you can do this without rooting the device, since there is a Siyah kernel for Gingerbread that is available in tar format that can be flashed with Odin. To do this, flash the I777UCKH7 full distribution, which you can download from the Download Repository (see the link in my signature), then flash the tar version of Siyah 2.6.14 Kernel. Flash each one in PDA. Without ticking Re-Partitioning. You will now be able to boot into recovery and you will have CWM recovery where you can flash many types of custom firmware.
Another route you could take is to flash the I777UCMD8 full distribution from the Download Repository, then use the Framaroot app with the Aragorn exploit to root the device, and then use Mobile Odin Pro, or Mobile Odin lite to flash the AJK v4.9 NoSwap kernel which is compatible with the stock system. If you need additional instructions on how to do that, just ask.
Is there a piece of code that I can modify to get the kernel embeded recovery to kill stock Sammy?
Click to expand...
Click to collapse
Hi guys
I have the following isue, i flashed my phone and I used this kernel
3.0.31 siyah s2-v6.0b5+ [email protected] #177
Now I cant make calls, I can't hear the person who call me and that person can't hear me, the phone radio doesn't work, sometimes the phone freeze specially when I watching videos. The phone doesn't recognize all internal memory. The return and search button doesn't work, to go back now I have to press the home button.
My question is: can I flash the kernel i have installed and install a new one. What kernel do you recommend me for this phone that works fine and what rom 4.2 is the best for this model.
I really appreciate any help.
Sent from my GT-I9100 using Tapatalk
Your signature says your phone is GT-I9100, but this is the forum for SGH-I777 AT&T version of Galaxy SII. Which phone do you have?
I have an i777 from at&t, after i flashed the kernel the phone model changed from i777 to I9100, but it is an i777 from at&t
Sent from my GT-I9100 using Tapatalk
Did you flash only the kernel, or did you also flash a rom?
What version of the operating system, and what rom are you currently running?
The kernel you flashed was built for the GT-I9100, which has a different hardware configuration from the SGH-I777. You should flash a kernel that was built for the I777, probably AJK, but answer the above questions first before I suggest which one.
First I flashed the kernel and installed the siyah one, then I installed a different rom. I had before 3.2 and then I installed 4.1.2 rom. Can you recommend me a god kernel for the I777 and a good rom if it possible 4.1.2 or 4.2 . I really appreciate your help.
Sent from my GT-I9100 using Tapatalk
I'm running jelly bean 4.1.2, base band version I9100XXLS8, build number JZ045K-I9100XWLS8, kernel 3.0.31 siyah s2- [email protected] #177
Sent from my GT-I9100 using Tapatalk
Maxx17 said:
I'm running jelly bean 4.1.2, base band version I9100XXLS8, build number JZ045K-I9100XWLS8, kernel 3.0.31 siyah s2- [email protected] #177
Click to expand...
Click to collapse
You appear to have flashed the GT-I9100 stock XWLS8 full package. Most likely you flashed the I9100 boot loaders with it. You also have an I9100 modem. I'm guessing that you flashed the I9100 siyah kernel afterwards. Your I-777 will not function with that firmware. I am surprised it even booted into system.
First, double verify that you are working with a SGH-I777 by pulling the battery and looking at the label in the battery compartment. After verifying that you have an I-777, you should flash the AT&T version of stock 4.1.2, I777UCMD8 full package which you can get from the download repository.
If you are unsure of anything, or have any questions, please ask before proceeding.
If you want to root and install a custom kernel, or install a custom rom, after getting your phone working again, we can point you in the right direction.
Thanks for your help, yes I verified and it is an i777 from at&t.
A have some questions:
1- I need to flash the kernel first and then install the new one?
2-can I install a 4.2 rom with the kernel you recommend me? I really like to have 4.2 on my phone.
3-how I get rooted after do that?
Sent from my GT-I9100 using Tapatalk
Maxx17 said:
1- I need to flash the kernel first and then install the new one?
Click to expand...
Click to collapse
No. Flash the I777UCMD8 full package from the download repository first. It contains the complete firmware, including stock kernel, stock system, an AT&T modem, and the I777 boot loaders. You can do any modifications after you return the phone to full stock 4.1.2.
3-how I get rooted after do that?
Click to expand...
Click to collapse
I am answering this question next, because it is the next step after flashing the stock firmware. To root, you should use the Framaroot application which you install on your phone. Use the Aragorn exploit. If the latest version doesn't work, download and use an earlier version, like 1.4.2.
2-can I install a 4.2 rom with the kernel you recommend me? I really like to have 4.2 on my phone.
Click to expand...
Click to collapse
Once rooted, you should use Mobile Odin lite or Mobile Odin Pro to install a custom kernel containing ClockworkMod Recovery. With this stock firmware, you would use AJK v4.9 No Swap.
After downloading the kernel, open the zip file and extract the boot.img. Use that to flash in Mobile Odin. After flashing the capacitive buttons will not work, so immediately reboot into recovery and flash the full AJK v4.9 No Swap package in CWM.
4.1.2 is the latest version of stock firmware available for the I777. If you want the Samsung Touchwiz interface, that is the latest you can get. Anything available 4.2 and above will be AOSP based. You can look in the I777 Android Development forum and the I777 Ported Development forum to see what is available. They all flash from ClockworkMod Recovery.
Ok man thanks, I'll do that, after that I'll let you know how everything goes
Sent from my GT-I9100 using Tapatalk