Power Button not working? - AT&T Samsung Galaxy S II SGH-I777

My Samsung Galaxy S2 (AT&T) is rooted, and I am running a custom ROM. It worked great for about 7 months, but yesterday my phone would randomly reboot when I would press my power button. I thought it was either the custom ROM or my power button was stuck so I installed a new custom ROM to see if that was the problem was software related. After I installed the new ROM the power button worked great, but this morning my phone would only unlock when I plugged it into the AC or when someone called me (The power button is not unlocking/locking the phone). I've tried to boot into Recovery, but I need the power button to reinstall a ROM and it's not working there either. I've done some research and one guy said it may have overheated and to let it sit without the battery for a few hours so this is what I'm doing now. However, I think I've come up with the conclusion that my power button is broken, and if this is the case I could use some help on how to fix it because I'm not skilled with phone hardware. Any help is appreciated, and if I find anything else that helps then I'll be sure to post back that my problem is fixed and what I did to fix it.
The ROM I'm running now is SlimBean for S2 (AT&T)

Has no one else had this problem? Does anyone have any fixes or suggestions?

Lots I'm sure. I remember seeing at least two other threads like this recently. U can get into download mode and flash without a power button if I'm not mistaken. Also u could use mobile odin pro to flash back to stock. I mean if your point is to try and find out if it's a hardware problem or q software problem. If you already know it's the hardware I would try and fix it yourself or get a warranty replacement.

Phalanx7621 said:
Lots I'm sure. I remember seeing at least two other threads like this recently. U can get into download mode and flash without a power button if I'm not mistaken. Also u could use mobile odin pro to flash back to stock. I mean if your point is to try and find out if it's a hardware problem or q software problem. If you already know it's the hardware I would try and fix it yourself or get a warranty replacement.
Click to expand...
Click to collapse
Thanks for the reply. You can flash without a power button in CWM Touch, but Slimbean only has CWM. I can't flash Touch without a power button. Kind of a crappy situation. lol
UPDATE:
I just tried using the Odin method in this thread (http://forum.xda-developers.com/showthread.php?t=1313659), and now I'm stuck in a bootloop on the AT&T logo. I can get into 3e Recovery, but once again without a power button I can't do a Wipe Data/Factory Reset so I'm just stuck at this point. Any more suggestions?

You could have downloaded an app from the market called quick boot and booted into recovery mode. My daughters phone is doing the exact same thing. Haven't got a chance to look at it. I have found out that the power button is different from the international version. Would have been an easy fix if they were the same. Her's is less than a year old so I may send it in to Samsung for repair. The button looks like its modular and soldered to the board instead of being soldered to the board via a flat flex cable. I'm going to updated my post on the subject once I get some facts.

beaverslayer said:
You could have downloaded an app from the market called quick boot and booted into recovery mode. My daughters phone is doing the exact same thing. Haven't got a chance to look at it. I have found out that the power button is different from the international version. Would have been an easy fix if they were the same. Her's is less than a year old so I may send it in to Samsung for repair. The button looks like its modular and soldered to the board instead of being soldered to the board via a flat flex cable. I'm going to updated my post on the subject once I get some facts.
Click to expand...
Click to collapse
I could boot into recovery (CWM), but it didn't do me any good because my power button wasn't working so I couldn't select an option. An update after you get facts would be nice though. Thank you.

karothacker said:
Thanks for the reply. You can flash without a power button in CWM Touch, but Slimbean only has CWM. I can't flash Touch without a power button. Kind of a crappy situation. lol
UPDATE:
I just tried using the Odin method in this thread (http://forum.xda-developers.com/showthread.php?t=1313659), and now I'm stuck in a bootloop on the AT&T logo. I can get into 3e Recovery, but once again without a power button I can't do a Wipe Data/Factory Reset so I'm just stuck at this point. Any more suggestions?
Click to expand...
Click to collapse
I was experiencing the exact same problem! At firstly my power button was so sensitive that it turned out to be a 'touch button' instead of pressed button. It always auto directed to power button menu. Until yesterday it decided to die on me. Thank God I installed AOKP rom which has the option to wake the screen with volume wake option.
However to answer your question (i ran into the same problem that I stuck in AT&T ICS boot logo), it's stuck because the data/cache needed to be wiped before it could freshly boot up. This is what I did:
1) Get into the download mode (with battery out/in, hold 2 volume buttons and plug into the usb)
2) Get Odin (I figured out you already have it)
3) Download a siyah kernel which version must be above 3 in order to have the touch kernel (nonswap or micswap in whatever you can find from the internet). Make sure you download the kernel in a TAR format. Otherwise ODIN wont work with it.
4) Flash the siyah kernel through Odin under PDA option
5) Now, unplug your usb and insert your battery. Hold on to both volume buttons again and all hail to auto bootup function in our phone. You will manage to get into siyah recovery
6) Reflash/restore any rom you want that has SIYAH's support
Hope this helps. Right now, Im searching for one working screen lock widget without having the screen on/off within seconds. It's annoying!

its a hardware problem.you can get it fixed from a local repair shop spending $10.

bb_hershey said:
I was experiencing the exact same problem! At firstly my power button was so sensitive that it turned out to be a 'touch button' instead of pressed button. It always auto directed to power button menu. Until yesterday it decided to die on me. Thank God I installed AOKP rom which has the option to wake the screen with volume wake option.
However to answer your question (i ran into the same problem that I stuck in AT&T ICS boot logo), it's stuck because the data/cache needed to be wiped before it could freshly boot up. This is what I did:
1) Get into the download mode (with battery out/in, hold 2 volume buttons and plug into the usb)
2) Get Odin (I figured out you already have it)
3) Download a siyah kernel which version must be above 3 in order to have the touch kernel (nonswap or micswap in whatever you can find from the internet). Make sure you download the kernel in a TAR format. Otherwise ODIN wont work with it.
4) Flash the siyah kernel through Odin under PDA option
5) Now, unplug your usb and insert your battery. Hold on to both volume buttons again and all hail to auto bootup function in our phone. You will manage to get into siyah recovery
6) Reflash/restore any rom you want that has SIYAH's support
Hope this helps. Right now, Im searching for one working screen lock widget without having the screen on/off within seconds. It's annoying!
Click to expand...
Click to collapse
Thanks a lot man. I was trying to find a kernal that was in TAR format, but I couldn't find one till you suggested Siyah. I just flashed the rom I used to use which was AOKP (Older version of ISC) and will upgrade to the newer JB rom tomorrow. thanks a lot.

Glad that it worked for you mate
Sent from SGS2 i777.. be prepared for typo.

bb_hershey said:
Glad that it worked for you mate
Sent from SGS2 i777.. be prepared for typo.
Click to expand...
Click to collapse
Just a quick update. I'll be talking it to a shop Monday to see if someone else can find the problem internally. In the meantime I've installed Quick Boot to restart/recovery/etc, ExTweaks to enable slide to wake (Volume wake didn't work all the time. This is much better.), and a Screen Lock Widget. I can finally use my phone again, but I still want this button fixed. lol

karothacker said:
Just a quick update. I'll be talking it to a shop Monday to see if someone else can find the problem internally. In the meantime I've installed Quick Boot to restart/recovery/etc, ExTweaks to enable slide to wake (Volume wake didn't work all the time. This is much better.), and a Screen Lock Widget. I can finally use my phone again, but I still want this button fixed. lol
Click to expand...
Click to collapse
Surprisingly my power button work now! Btw, which rom you flashed and which screen lock widget you used? I tried mre than 10 apps but my screen goes on/off like crazy!
Sent from SGS2 i777.. be prepared for typo.

bb_hershey said:
Surprisingly my power button work now! Btw, which rom you flashed and which screen lock widget you used? I tried mre than 10 apps but my screen goes on/off like crazy!
Sent from SGS2 i777.. be prepared for typo.
Click to expand...
Click to collapse
That's awesome! Sadly mine is still broken. lol
Right now I have the AOKP (JB 10/17) ROM, and the widget is called "Lock Screen Widget." The Widget only locks the screen; it's working great for me!

I spoke to Josh from mobile tech videos since my wife's i777 power button just took a Shiite. He said he can do it for $35. I fully trust his work as he fixed my old cappy long ago and I have spoken to him on a few occasions on the phone just to be android stuff.
I have been at work all week so I haven't even been able to see if my wife's phone is a software issue or hardware. But it can only be turned on (the screen) by plugging it into a charger. So I am following this thread so tomorrow or soon I hope to check out her phone or send it to Josh.
Sent from My SGH-I777 Running Spiderman Themed AOKP or Spiderman Themed CM10

RockRatt said:
I spoke to Josh from mobile tech videos since my wife's i777 power button just took a Shiite. He said he can do it for $35. I fully trust his work as he fixed my old cappy long ago and I have spoken to him on a few occasions on the phone just to be android stuff.
I have been at work all week so I haven't even been able to see if my wife's phone is a software issue or hardware. But it can only be turned on (the screen) by plugging it into a charger. So I am following this thread so tomorrow or soon I hope to check out her phone or send it to Josh.
Sent from My SGH-I777 Running Spiderman Themed AOKP or Spiderman Themed CM10
Click to expand...
Click to collapse
$35 is well worth this annoyance. I'm going to see what my local shop will charge; if he charges around the same price and I don't have to ship it then I will gladly take it there. That sounds like the same problem I was having so it's probably hardware, but you can flash another ROM to see if that fixes it. Please post back with any further information; this problem seems to be all over with no one giving much advice/tips. Good luck!

karothacker said:
$35 is well worth this annoyance. I'm going to see what my local shop will charge; if he charges around the same price and I don't have to ship it then I will gladly take it there. That sounds like the same problem I was having so it's probably hardware, but you can flash another ROM to see if that fixes it. Please post back with any further information; this problem seems to be all over with no one giving much advice/tips. Good luck!
Click to expand...
Click to collapse
Yup. Unsure what causes it and how I got it back alive. Was thinking perhaps the board problem? Have you guys had some severe fall or water damage done to your phone before? Just asking
Sent from SGS2 i777.. be prepared for typo.

Mine was like that too, when i pressed it, it would bring the power menu or restart the phone as if i left it pressed some seconds, but now it works fine. Im using latest AOKP by task. Really weird.
Any way, while i was with the problem, i was using the slidetowake feature from Siyah, volume wake and an that maps long press search button to unlock, and i don't even use the power button anymore. Its more confortable to me to slide a finger across the screen, and to long press the search button to lock it.

bb_hershey said:
Yup. Unsure what causes it and how I got it back alive. Was thinking perhaps the board problem? Have you guys had some severe fall or water damage done to your phone before? Just asking
Sent from SGS2 i777.. be prepared for typo.
Click to expand...
Click to collapse
That's interesting. I have not dropped my phone, and it has never gotten anything more than a little rain on the screen. I took it to a cell phone shop and he said that the water damage indicator inside the phone had turned pink which means that it thinks there was water damage, but there was no corrosion on the board or any other indicators of water damage. I don't know what could have turned that pink though...
djluis48 said:
Mine was like that too, when i pressed it, it would bring the power menu or restart the phone as if i left it pressed some seconds, but now it works fine. Im using latest AOKP by task. Really weird.
Any way, while i was with the problem, i was using the slidetowake feature from Siyah, volume wake and an that maps long press search button to unlock, and i don't even use the power button anymore. Its more confortable to me to slide a finger across the screen, and to long press the search button to lock it.
Click to expand...
Click to collapse
That's how my problem started so I would be careful with using the button to much. It's good that you like the slide2wake more. lol I believe it's a soldering problem so the shop I took it to is looking into that.

karothacker said:
That's interesting. I have not dropped my phone, and it has never gotten anything more than a little rain on the screen. I took it to a cell phone shop and he said that the water damage indicator inside the phone had turned pink which means that it thinks there was water damage, but there was no corrosion on the board or any other indicators of water damage. I don't know what could have turned that pink though...
That's how my problem started so I would be careful with using the button to much. It's good that you like the slide2wake more. lol I believe it's a soldering problem so the shop I took it to is looking into that.
Click to expand...
Click to collapse
Sometimes its the moist around you would turned the indicator to pink. I have read it somewhere. Now it works flawlessly. So you left your phone with them?
Sent from SGS2 i777.. be prepared for typo.
---------- Post added at 06:33 PM ---------- Previous post was at 06:31 PM ----------
djluis48 said:
Mine was like that too, when i pressed it, it would bring the power menu or restart the phone as if i left it pressed some seconds, but now it works fine. Im using latest AOKP by task. Really weird.
Any way, while i was with the problem, i was using the slidetowake feature from Siyah, volume wake and an that maps long press search button to unlock, and i don't even use the power button anymore. Its more confortable to me to slide a finger across the screen, and to long press the search button to lock it.
Click to expand...
Click to collapse
volume wake button doesnt always wake my screen without a few attempts. Which app you used to map the search button to lock the screen? or did you personally got into the prop to map it?
Sent from SGS2 i777.. be prepared for typo.

bb_hershey said:
Sometimes its the moist around you would turned the indicator to pink. I have read it somewhere. Now it works flawlessly. So you left your phone with them?
Sent from SGS2 i777.. be prepared for typo.
Click to expand...
Click to collapse
That's what I thought it might be. Maybe shower steam? I did leave it with them, and he said all he did was mess with the button and it started working again. I don't know what it is... maybe dust in the button?

Related

broken power button?

So I've been playing with my phone for the last couple of days and recently I've been getting random reboots. I thought it was the ROM so I rolled back to a ROM I wasn't getting the issue and experienced the same. I did switch from CWM to TWRP and started getting the problem right around the same time. What happens is the phone goes dark like it's going to reboot, it does it's vibrate to say it's awake and repeats the vibrate roughly once a second until I push the power button a few times or until I pull the battery. I've been able to replicate this by holding the power button down.
Has anyone experienced this issue?
so is your power button broken?
rangercaptain said:
so is your power button broken?
Click to expand...
Click to collapse
it still functions but it feels touchy. it's very easy to activate it. I'm wondering if the hardware switch is loose and out of place. I'm still debating on tearing it down or calling Samsung and getting it replaced, but I'm not sure if I really want a referb or some tech playing with my phone.
A referb word be preferable to a broken power button.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
kinghorsey said:
A referb word be preferable to a broken power button.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
True, but I generally rebuild my devices myself so I don't know. Does anyone have experience with Samsung warranty return and wait times?
Theoriginalgiga said:
True, but I generally rebuild my devices myself so I don't know. Does anyone have experience with Samsung warranty return and wait times?
Click to expand...
Click to collapse
They just told me not 2 hours ago(Samsung rep) that it would take 6 weeks to get me a replacement s pen...maybe a phone is faster?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
UnHived Mind said:
They just told me not 2 hours ago(Samsung rep) that it would take 6 weeks to get me a replacement s pen...maybe a phone is faster?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
haha I doubt it, I'll call them tomorrow to find out and if it's going to be too long I'll just tear it down and take a look at it. I have been meaning to look at the possibilities of adding an inductive charger to the phone, maybe this is the opportunity.
I'm having exact same problem. power buttong gets stuck if I press it. phone reboots and just vibrates after reboot without going to recovery or samsung logo. I have stopped using power button and enabled wakeup screen on volume button (SlimROM). Also added "Power" to power widgets in notification drawer settings. I try to avoid pressing power as much as possible.
i'm thinking of calling Samsung support or open phone myself to check it out. let me know if you got it fixed by Samsung. how long did it take to get the phone back? did you restore phone to stock rom before sending it? was it covered under warrenty?
Theoriginalgiga said:
So I've been playing with my phone for the last couple of days and recently I've been getting random reboots. I thought it was the ROM so I rolled back to a ROM I wasn't getting the issue and experienced the same. I did switch from CWM to TWRP and started getting the problem right around the same time. What happens is the phone goes dark like it's going to reboot, it does it's vibrate to say it's awake and repeats the vibrate roughly once a second until I push the power button a few times or until I pull the battery. I've been able to replicate this by holding the power button down.
Has anyone experienced this issue?
Click to expand...
Click to collapse
I have an issue similar to this, im thinking my issue is loose connections. what mine does is turn on for a bit and then restart. I've been able to resolve mine by flashing this rom.
http://forum.xda-developers.com/showthread.php?t=2261598
via odin.
I would try taking your phone apart and cleaning the power button with a q-tip and a LITTLE alcohol. if that fails i'd try to flash the rom. Good Luck
attends nimeno
did flashing the rom every fix it op? or did you just go ahead and replace the power button? if the rom did fix it, can someone repost the link? the link is broken.
Again i would try cleaning the power button off first.
to do so:
there should be 9 small phillips screws around the battery -remove those
then the metallic looking rim around the phone has clips that clip the back portion to the rest of the phone. use a finger nail and seperate the grey from the white around the phone, unlatching the clips. remove the back cover and locate the power button(on the left when looking at it from the back. dap the q-tip in a tiny bit of alcohol barely moistening the cotton. apply the q-tip to the button getting a small amount on it and press the button until it clicks smoothly. on the cover you took off you can remove the button it has a little rubber angle on each end holding it in. clean around that also. reassemble and test.
dweeezy said:
I have an issue similar to this, im thinking my issue is loose connections. what mine does is turn on for a bit and then restart. I've been able to resolve mine by flashing this rom.
http://forum.xda-developers.com/showthread.php?t=2261598
via odin.
I would try taking your phone apart and cleaning the power button with a q-tip and a LITTLE alcohol. if that fails i'd try to flash the rom. Good Luck
Click to expand...
Click to collapse
terryxviet said:
did flashing the rom every fix it op? or did you just go ahead and replace the power button? if the rom did fix it, can someone repost the link? the link is broken.
Click to expand...
Click to collapse
Personally I wouldn't ever Odin with this issue, a reboot while flashing a new bootloader potentially boom. My issue was persistent through all roms and even in recovery which lead me to believe it was hardware. What I did to solve the issue was I pulled the case off, battery out and just played with the button for an hour or so. Felt how it clicked and if it was clicking funny. After that it worked fine. By playing with it I don't mean mashing on it, I mean gently and normal clicking, feeling where it caught and didn't. What it felt like to me was some lint under the button which eventually worked it's way out. Hope this helps
Sent from my Transformer Prime TF201 using xda app-developers app
I had this issue of my power button sticking today. I took the phone apart and used some rubbing alcohol on a q-tip to get some on the button and pressed it repeatedly. I did that a few times and used some canned air to dry it out a few times. Put it all back together and button is working like new again.
Theoriginalgiga said:
Personally I wouldn't ever Odin with this issue, a reboot while flashing a new bootloader potentially boom.
Click to expand...
Click to collapse
If its not staying on at all then i agree with you. But if the problem is off and on and you've already tried cleaning the button thats really one of your last resorts. if the phone reboots during a flash you will get a firmware download error and you will have to reflash. may take a few tries but if the phone eventually stays on it'll be fine.
rquiett said:
I had this issue of my power button sticking today. I took the phone apart and used some rubbing alcohol on a q-tip to get some on the button and pressed it repeatedly. I did that a few times and used some canned air to dry it out a few times. Put it all back together and button is working like new again.
Click to expand...
Click to collapse
fantastic to hear!
dweeezy said:
If its not staying on at all then i agree with you. But if the problem is off and on and you've already tried cleaning the button thats really one of your last resorts. if the phone reboots during a flash you will get a firmware download error and you will have to reflash. may take a few tries but if the phone eventually stays on it'll be fine.
Click to expand...
Click to collapse
As I agree with you. Glad we're on the same page with a power issue like that, I'd check via the recovery image to see if it happened there and continue troubleshooting.
Sent from my Transformer Prime TF201 using xda app-developers app
So I've confirmed it is the power switch. Any way to replace it?
dweezy you must have super tough fingernails. I recommend two guitar picks, working them as a pair -- one pixk to separate the bezel from the body, the other to hold the place as you move around the bezel.
Lost
Phone is stuck in a boot loop and this is what I know so far. Phone is on stock ROM, power button is working fine, I can get to recovery and OS and download mode, and while phone was charging I took the battery out and the phone keeps vibrating. I now know it's a hardware problem for me (I think), but I can not pin point where. Any advise would be helpful cause I really love my note and this is just breaking my heart. :crying:
teddy_1da said:
Phone is stuck in a boot loop and this is what I know so far. Phone is on stock ROM, power button is working fine, I can get to recovery and OS and download mode, and while phone was charging I took the battery out and the phone keeps vibrating. I now know it's a hardware problem for me (I think), but I can not pin point where. Any advise would be helpful cause I really love my note and this is just breaking my heart. :crying:
Click to expand...
Click to collapse
When you get into recovery does the phone stay on? If so how long 10 mins? Hours? If it stays on I would assume its software.
Phone stays on forever in those modes, I'm gonna flash a different ROM to see what happens .... so I'm back to say it's a hardware problem. Same exact thing happens with liquid JB, paranadroid, and CM 10...did a clean wipe before installing each one too. Friend pointed me to some sites talking about a battery failure causing phones to do that so I'm gonna order a new one and see what happens...if this fails I have to get a new phone...and continue to work on my baby.

[Q] My Power Button is on it's last leg. What should I do?

Hello. My GS2's power button is working about 20% of the time. Usually what happens is a short press acts as if it was a long press and the long press menu comes up and then if you press the button again it restarts. I had been running CM9 on it for about 6 months without any issues. I started overclocking about a month ago so I thought it might be a problem with the kernel I installed so I followed the tut to return it to stock using heimdall but after everything was reset the issue was still, well, an issue.
Ideally, I'd like to fix the power button but I bought this phone on ebay so I can't go to Samsung with a warranty. I have never taken my phone apart, but is it possible to fix it myself? I also read that you can install CWM touch and wake the phone up via volume buttons so how would I go about doing that? What are your suggestions? Thanks.
Wieland959 said:
Hello. My GS2's power button is working about 20% of the time. Usually what happens is a short press acts as if it was a long press and the long press menu comes up and then if you press the button again it restarts. I had been running CM9 on it for about 6 months without any issues. I started overclocking about a month ago so I thought it might be a problem with the kernel I installed so I followed the tut to return it to stock using heimdall but after everything was reset the issue was still, well, an issue.
Ideally, I'd like to fix the power button but I bought this phone on ebay so I can't go to Samsung with a warranty. I have never taken my phone apart, but is it possible to fix it myself? I also read that you can install CWM touch and wake the phone up via volume buttons so how would I go about doing that? What are your suggestions? Thanks.
Click to expand...
Click to collapse
have you tried looking at this thread yet?
http://forum.xda-developers.com/showthread.php?t=2047876
chapelfreak said:
have you tried looking at this thread yet?
http://forum.xda-developers.com/showthread.php?t=2047876
Click to expand...
Click to collapse
Yeah. I tried everything there except for taking it apart. I also found another thread that suggested that I enable the slide across screen to wake tweak from sirah kernel and that's what I have going right now.
I think your best bet is to replace the main board from a busted screen phone on eBay or continue what you are doing.
Sent from my SGH-I777 using xda app-developers app
I have warrantied a Samsung phone purchased on Ebay with no issues.
If you are not under warranty, Mobile tech videos can fix that power button. The owner is an XDA member and has fixed phones for me previously. The service is $40.
Sent from my SGH-I777 using xda premium

Phone on/off button causing phone to reboot

Everytime I go to use the on/of button for anything, I barely press it and sometimes it doesn't work, other times I quickly press it and it thinks I held it for the menu to come up to reboot or power down. But most of the time... It just reboots on its own if I use the switch. Any way to by pass it? The switch itself I think is just super sensitive, I barely have to even touch it. I've taken phone apart and cleaned around the switch. I'm trying to hold out till the Galaxy S 4 comes out... Hopefully soon!!
Sent from my SGH-I777 using xda app-developers app
Although I can't offer a fix... The galaxy s4 goes for preorder for at&t on the 16th of this month for $250 I believe. And T-Mobile is releasing it for $99 on may 1. I think that is all that is currently known about any galaxy s4 release dates. Hope I kinda helped in any roundabout way.
Galaxy S3 T999 rooted and flashed more than daily.
Brand new off contract nexus 4. 250 dollars. If you can deal with the limited internal sd card space and don't have to have your entire music collection with you at all times like some people here lol.
Free Apps to Help
I have the same issue, can't touch the power button. I smack the button a few times to get it to behave. I have installed the following two free apps so I do not have to touch the power button again.
Auto Screen On.
Button Savior(Root)
I am not allowed to post links to the apps, but they can both be found on Google Play.
You have to have root and you have to read the instructions for each app.:good:
Thanks to everyone, I am rooted and running CM9, so that shouldn't be an issue and I'll check into those apps. Just need to make til I can upgrade to the GS4. Thanks for the dates cuz now I have an idea of how long and I'll go order it that day. If that's the preorder, then when is the release date I wonder?
Sent from my SGH-I777 using xda app-developers app
I tried and am using "auto screen on" works prefect!! Using the proximity sensor instead of on off button. Thanks again guys, always seem to find help on XDA!
Sent from my SGH-I777 using xda app-developers app
I think it's absolutely fascinating how we both seemed to develop the problem at the same time. Could be that many others will soon suffer the same problem. Although I'm definitely going to look into those apps now, I found a temporary fix myself (and it could just be coincidental anyway). I pulled the battery out, pressed my power button repeatedly about 100 times, and now I'm able to use the power button again without it sticking and causing this problem.
The weird part is, that physically, the external button wasn't stuck at all. I could still click the button as many times as I wanted even while "stuck" symptoms appeared on my phone, like the power menu coming up, or a reboot. My guess is that the hardware problem lies somewhere between the physical button and the electronic circuitry within, but I haven't actually stripped down the phone and looked inside. But perhaps jamming the button a hundred times helped decrease the chance of the internal "signal relayer" getting stuck.
I had a similar issue with some keys on my laptop after a little kid played with it and got my keys messed up. Outside button was ok, something beyond that was not (so pressing "s" once would lead to 40 s's appearing on my document). Repeatedly pressing ended up helping out quite a lot.
Nonetheless, this may end up being a very useful thread for others later on.
My GF i777 was having the same issue reported here. I just sent it into mobiletechvideos.com and had the power button on the mother board replaced for 40-50 bucks and it works perfectly now. I would suggest using them if you want to keep your i777 working
bhatbhai said:
I think it's absolutely fascinating how we both seemed to develop the problem at the same time. Could be that many others will soon suffer the same problem. Although I'm definitely going to look into those apps now, I found a temporary fix myself (and it could just be coincidental anyway). I pulled the battery out, pressed my power button repeatedly about 100 times, and now I'm able to use the power button again without it sticking and causing this problem.
The weird part is, that physically, the external button wasn't stuck at all. I could still click the button as many times as I wanted even while "stuck" symptoms appeared on my phone, like the power menu coming up, or a reboot. My guess is that the hardware problem lies somewhere between the physical button and the electronic circuitry within, but I haven't actually stripped down the phone and looked inside. But perhaps jamming the button a hundred times helped decrease the chance of the internal "signal relayer" getting stuck.
I had a similar issue with some keys on my laptop after a little kid played with it and got my keys messed up. Outside button was ok, something beyond that was not (so pressing "s" once would lead to 40 s's appearing on my document). Repeatedly pressing ended up helping out quite a lot.
Nonetheless, this may end up being a very useful thread for others later on.
Click to expand...
Click to collapse
I am having this same problem. I started a different thread a few days ago about power button issues that at the time I attributed to the recent software update. But it was apparently just very coincidental, and after some tinkering I was able to get the button working using similar methods described in this thread already. After I got it working again, I rooted and successfully installed AOKP 4.2.2, but now when I manage to get the power button to send a signal it pulls up the shut down options screen and then restarts about ten seconds after that. I assume it is still the same hardware issue, but since the restarts only began occurring after flashing the custom rom I can't entirely rule out the possibility that it is some how related.
jmeas said:
I am having this same problem. I started a different thread a few days ago about power button issues that at the time I attributed to the recent software update. But it was apparently just very coincidental, and after some tinkering I was able to get the button working using similar methods described in this thread already. After I got it working again, I rooted and successfully installed AOKP 4.2.2, but now when I manage to get the power button to send a signal it pulls up the shut down options screen and then restarts about ten seconds after that. I assume it is still the same hardware issue, but since the restarts only began occurring after flashing the custom rom I can't entirely rule out the possibility that it is some how related.
Click to expand...
Click to collapse
If you flash back to stock and you still have the button problem, then it is almost certainly hardware. Did you do that yet?
I actually just flashed AOKP a few days ago. Instead of using one of the applications above, which either drained my battery (auto screen on) or wasn't entirely convenient (button savior), I've got a different set up.
In rom control, activate "volume rocker to wake." It's not a hundred percent, oddly, but it gets the job done. This will help with screen on.
For screen off and power menu, I added a navbar with the second smallest height (30 dpi?), with the power button on it. Now I permanently have a the ability to turn off my screen, from whatever I'm doing, with just one click. Long pressing it gets you the power menu.
As a side note, I added screenshot to the power menu so I wouldn't have to hold my power button for that either. But no, I haven't tried using the nav bar power button with volume down for screenshot, because I'm an idiot and just thought of that now.
Sent from my Nexus 10 using Tapatalk HD
creepyncrawly said:
If you flash back to stock and you still have the button problem, then it is almost certainly hardware. Did you do that yet?
Click to expand...
Click to collapse
I haven't had the opportunity to do that yet. The restart issues may have begun when I flashed the Siyah 4.3.3 kernel before installing the rom, but I probably won't have the chance to tinker with it until the weekend.
Edit: I have also noticed that I can only reliably use the volume buttons to wake my phone up from sleep when it is plugged in.
Weird, I just started getting this problem today, too. Kinda weird how this all happened to us in the same month
Add me to the list of those whose power button suddenly and mysteriously died. Opened up an email Sunday 4/14, the phone rebooted on its own, and when it restarted the power button no longer worked. My suspicious is it's somehow software/rom related. I'm running Task's AOKP 4.2.2 (4.1.13), for what its worth. If everyone with the issue posts their experience maybe we can figure out what's going on...
Mine started doing the same back in March. Pressing the power button would cause it to reboot and sometimes bring up the power menu, as if I was long pressing it. Then the power button didn't want to work at all, sometimes. I tried everything I could think of, even reverting back to stock, but the problem persisted. Then I finally found that pulling the battery and pressing the power button a few times fixed the problem, for a while anyways. If I don't do it every 2-3 days, it starts happening again. I've actually seen something similar happen with notebooks before. A charge manages to build in the motherboard and the system won't power on. Removing the power supply, pulling the battery, and holding the power button for 30 seconds to allow the charge to dissipate actually fixed the notebooks. That's where I got the idea to do it with my phone. Just wish I didn't have to do it every couple days.
My power button stopped working a couple of days ago and I tried this solution http://forum.xda-developers.com/showthread.php?t=1193057&page=2 post #17. Just take the phone apart, spray the power button with the electrical cleaner, and continuously pushing the button for a while (2 or 3 min). Keep the button wet while pushing it. Let it dry, put the phone back together, and start it back up. You should be able to tell whether it worked because when you put the battery back in it will not immediately start back up.

Phone reboot before finishing flash and/or download

Hi,
My note has started to act weirdly not too long ago. i had a custom firmware installed on it and it was working fine. i decided to change the firmware to put it back on stock Rogers and again it worked fine. maybe 1 week or 2 after the phone started to go into boot loop, even keeping the display off and just vibrating. i've been able to get into the recovery and download mode. i tried several way to fix the boot loop but in vain. i left the phone on my desk for a couple of weeks since i didnt had much time to work on it. now i'm trying to start working on it but i ended up with more errors!
now:
- my phone does get in download mode but reboot by itself even before i have time to flash anything with odin.
- i've only been able to get in recovery mode once, tryied to wipe to factory, but then rebooted by itself again.
whatever i do now i can't stay in any modes more than 5 sec until the phone restarts by itself...
Any tips and trick to have my phone working again?
Thanks in advance!
It sounds like the infamous stuck power button has plagued your device.
Try flicking the back of your phone by the power button with your finger. That's been a common fix. Another one is flicking the power button itself. If those methods fail you can try taking it apart and cleaning it. It is a very small tiny microswitch. Spraying cleaners or anything from the outside won't work. It's not hard to take apart, but I hope flicking it helps.
goteks21 said:
Hi,
My note has started to act weirdly not too long ago. i had a custom firmware installed on it and it was working fine. i decided to change the firmware to put it back on stock Rogers and again it worked fine. maybe 1 week or 2 after the phone started to go into boot loop, even keeping the display off and just vibrating. i've been able to get into the recovery and download mode. i tried several way to fix the boot loop but in vain. i left the phone on my desk for a couple of weeks since i didnt had much time to work on it. now i'm trying to start working on it but i ended up with more errors!
now:
- my phone does get in download mode but reboot by itself even before i have time to flash anything with odin.
- i've only been able to get in recovery mode once, tryied to wipe to factory, but then rebooted by itself again.
whatever i do now i can't stay in any modes more than 5 sec until the phone restarts by itself...
Any tips and trick to have my phone working again?
Thanks in advance!
Click to expand...
Click to collapse
Sounds like a stuck power button.
Flick the back of your phone a few times.........I know " but I hear and feel it click", doesnt mean anything. Flick it
Some are not afraid and will open phone and clean contacts with alcohol and qtip. I am afraid though.
Flick it
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
440bro said:
It sounds like the infamous stuck power button has plagued your device.
Try flicking the back of your phone by the power button with your finger. That's been a common fix. Another one is flicking the power button itself. If those methods fail you can try taking it apart and cleaning it. It is a very small tiny microswitch. Spraying cleaners or anything from the outside won't work. It's not hard to take apart, but I hope flicking it helps.
Click to expand...
Click to collapse
I must type just a bit slower than you. beat me to it
Hey guys thanks for the quick answer. i really happy to know that it's a kind of common problem. the things is, could you explain me what you mean by flicking my phone? english is not my first language so i don't fully understand what i need to do :s like i should swiftly hit my finger with my phone by the power button to "unstuck" the button?
hummm don't mind that, i just took it appart, pretty easy job. so now, i spray contact cleaner on the switch itself?
Thanks
goteks21 said:
Hey guys thanks for the quick answer. i really happy to know that it's a kind of common problem. the things is, could you explain me what you mean by flicking my phone? english is not my first language so i don't fully understand what i need to do :s like i should swiftly hit my finger with my phone by the power button to "unstuck" the button?
Click to expand...
Click to collapse
Just like you would flick a bug off your arm
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
440bro said:
It sounds like the infamous stuck power button has plagued your device.
Try flicking the back of your phone by the power button with your finger. That's been a common fix. Another one is flicking the power button itself. If those methods fail you can try taking it apart and cleaning it. It is a very small tiny microswitch. Spraying cleaners or anything from the outside won't work. It's not hard to take apart, but I hope flicking it helps.
Click to expand...
Click to collapse
captemo said:
Sounds like a stuck power button.
Flick the back of your phone a few times.........I know " but I hear and feel it click", doesnt mean anything. Flick it
Some are not afraid and will open phone and clean contacts with alcohol and qtip. I am afraid though.
Flick it
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
Click to expand...
Click to collapse
Hey guys thanks alot on that tip it really helped!
the contact cleaner might have help but when i reassembled my phone it was still rebooting. the did the flick trick and it seems to be working now. i will test it a little (pressing several time ton the power button) and flick it again if i need to.
Again, thanks a lot!

[Q] **SOLVED** Verizon GS4 crash/reboot problem

Hello XDA-ers!
Having a problem with my Verizon GS4 rooted phone not staying in the "download mode". In fact, it won't stay on for more than 2 seconds before it goes black and unresponsive. Removing/reinstalling the battery ALONE gets the phone to try to start up.
Before the crash, it was running. Thrashing to Pandora, got out of car, unplugged AUX, looked to check the time, phone was out cold. It had a full charge.
4.4.2
Verizon
towelroot/SafeStrap 3.72
Read somewhere it could be a battery problem, so I got a new Rayovac one from a local store. Nothing new happens.
Tried cleaning the insides of the phone for a possible stuck power switch problem. Same problem. Clean as a whistle inside.
Phone will not recognize charger or PC or Mac. Frustration increases.
How do I get my phone to stay in Download Mode or stay on for more than 2 seconds? Is this hardware related?
Hi,
It certainly sounds like a stuck power button to me. Just cleaning inside might not solve it either.
For other ideas though , I'll have your thread moved to your device section, here...
> Verizon Samsung Galaxy S 4 > Verizon Samsung Galaxy S 4 Q&A, Help & Troubleshooting
Good luck!
Darth said:
Hi,
It certainly sounds like a stuck power button to me. Just cleaning inside might not solve it either.
For other ideas though , I'll have your thread moved to your device section, here...
> Verizon Samsung Galaxy S 4 > Verizon Samsung Galaxy S 4 Q&A, Help & Troubleshooting
Good luck!
Click to expand...
Click to collapse
While the phone was apart, I was able to click the buttons. I'm taking it apart again right now just to make sure.
Edit: took phone apart. everything was clean. all buttons depressed (like me) and returned to normal position. phone is still doing the same thing. Will not stay on plugged in. Will not charge. Not recognized by Odin because it wont stay on long enough.
Switching to backup phone in the mean time.
Update! Solved!
After looking everywhere, I finally ran across a video explaining how to un-stick the power button. Even though the button clicks, that doesn't mean it is g2g. I ended up wacking the power button area of the phone on a table and with a hammer. Which one worked? I don't know. Finally unstuck and working properly. However, I'm now a proud owner of TWO backup phones (GS3 and Droid X).
Bottom line: GET AGGRESSIVE AND HIT THE POWER BUTTON. Caution as to not to crack your screen.
Thanks for the confirmation on the power button diagnosis!
CraftyCraft said:
After looking everywhere, I finally ran across a video explaining how to un-stick the power button. Even though the button clicks, that doesn't mean it is g2g. I ended up wacking the power button area of the phone on a table and with a hammer. Which one worked? I don't know. Finally unstuck and working properly. However, I'm now a proud owner of TWO backup phones (GS3 and Droid X).
Bottom line: GET AGGRESSIVE AND HIT THE POWER BUTTON. Caution as to not to crack your screen.
Thanks for the confirmation on the power button diagnosis!
Click to expand...
Click to collapse
I am having this same problem, can you link the video you saw? I'm not sure where/how hard to wack the power button....
gleggie said:
I am having this same problem, can you link the video you saw? I'm not sure where/how hard to wack the power button....
Click to expand...
Click to collapse
There are a couple of these videos out there about the wacking method. Sadly, I'm a fresh user and cannot link you to any videos.
Do a YouTube search for "galaxy s4 stuck power button". It will lead you to a how to video or two that you want. It was a firm wack IMO since I got pretty upset after the first two soft wacks. Other videos show how to do less abusive methods, but I got frustrated after already taking apart and manipulating the button.
Good luck!

Categories

Resources