i9300 rooted with I9300XXDLIB poland, the i flashed the ANDROID REVOLUTION HD, after it finish i'm stuck for hours in initialization screen, dunno what to do!
higuismo said:
i9300 rooted with I9300XXDLIB poland, the i flashed the ANDROID REVOLUTION HD, after it finish i'm stuck for hours in initialization screen, dunno what to do!
Click to expand...
Click to collapse
Go into recovery (Vol UP, Home, Power) and wipe, and reflash.
NewAussiefromCanada said:
Go into recovery (Vol UP, Home, Power) and wipe, and reflash.
Click to expand...
Click to collapse
tHE PROBLEM REMAINS =\
higuismo said:
tHE PROBLEM REMAINS =\
Click to expand...
Click to collapse
Try re-downloading the Android Rev HD, might have had a bad download.
Format /system, wipe delvic cache, and cache, re-flash
NewAussiefromCanada said:
Go into recovery (Vol UP, Home, Power) and wipe, and reflash.
Click to expand...
Click to collapse
another problem, the cellphone never turn's off, if i press the butom he keeps reseting
Take the battery out
Redownload ARHD, it might not have finished while it was downloading. Once downloaded completely, flash it via recovery with "install from sdcard" option.
Sent from my GT-I9300 using xda premium
I've formated the /system and /cache, and reflashed (I9300XXDLIB_I9300OXFDLI1_I9300XXDLIB), now it's working again, now i'll try to do revolution hd again
i think i'm doing it wrong, re downloaded ARHD, after doing what i saied tryied to do ARHD again, and the problem reshowed!
In that case its either a bad download or user not following the instructions .
Question and Answer thread for ARDH rom is working .
jje
And I know this is probably a stupid question, but have you got CWM installed? You're not trying to flash from a stock rom are you?
I know its a stupid question but it's been done before...
Thanks
Thank you very much XDA members, u guys helped another person in the world =)
Related
I recently got a galaxy player 5 international with froyo. I rooted it with no problems, but when I tried to flash a kernel with cwm recovery it would get stuck in a boot loop unless i went into the cwm recovery mode. I noticed that the kernel I used, rumirand's r14, was based off of GB and thought that might be my problem. I tried updating my firmware to GB using WT Ho's custom rom, and now it just hangs on the samsung logo, but I can still get into cwm. I made sure to wipe both caches and wipe data before installing the rom. Is this fixable or have I turned it into an expensive paperweight?
Did you try a factory reset?
I am not expert but i tried the same with R14 kernel and bricked but done the same with R13 and it worked .
Chris4evernoob said:
Did you try a factory reset?
Click to expand...
Click to collapse
Now or before installing the rom? I did a factory reset before installing, but I haven't done one since.
DZonikg said:
I am not expert but i tried the same with R14 kernel and bricked but done the same with R13 and it worked .
Click to expand...
Click to collapse
I just flashed the R13 kernel, but I'm still in the same situation.
Instead of flashing a new kernel there should be factory reset option on the first set you have or in "mounts and storage"
I had this problem once and I managed to solve it flashing a full rom (like 2.3.5 rooted and with rj kernel). It seems some users are having problems when flashing only the kernel. After you solve the problem, flash back group rom.
I just tried the rom+kernel. It said it was successful but it must not have been because it was hanging on boot again, and now it won't respond to the power button. If I plug it in to the computer it gets an image of a battery turns off and repeats.
jnmaster said:
I just tried the rom+kernel. It said it was successful but it must not have been because it was hanging on boot again, and now it won't respond to the power button. If I plug it in to the computer it gets an image of a battery turns off and repeats.
Click to expand...
Click to collapse
Can you go back to CWM after flashing rom+kernel? If yes, usually it is a matter of wiping the data and Dalvik cache. Which ROM+Kernel did you flashed?
WT Ho said:
Can you go back to CWM after flashing rom+kernel? If yes, usually it is a matter of wiping the data and Dalvik cache. Which ROM+Kernel did you flashed?
Click to expand...
Click to collapse
No, I'm not able to get a response from the power button.
I used the ROM + kernel you posted http://forum.xda-developers.com/showthread.php?t=1446774
I tired to install a rom on to my samsung GT I9300 s3 and I must of done something wrong, now my phone wont go pass the boot logo screen , I have wiped the dalvik cache, wipe cache, wipe user data/ factory reset using CWM but it still doesnt work. Im from the uk on network o2.
any help is much appreciated.
Thank you
kingjamin said:
I tired to install a rom on to my samsung GT I9300 s3 and I must of done something wrong, now my phone wont go pass the boot logo screen , I have wiped the dalvik cache, wipe cache, wipe user data/ factory reset using CWM but it still doesnt work. Im from the uk on network o2.
any help is much appreciated.
Thank you
Click to expand...
Click to collapse
Give us more details on what you have done exactly before you flash the rom.
And details about which rom.
One solution would be to flash stock.
Go in download mode with 3 buttons combo(volume down-power and home button) open odin,put as pda the stock rom as a tar and hit start.
Note: Be sure kies tray agent is not running in the background you have to kill the process with task manager
I also have this issue, after using a CM9 rom then rolling back to stock rom I have downloaded the stock rom, not sure if its 100 match for my phone but its stuck at samsung logo its 1 day old, please help?
Thanks
get into download mode and try flash again.
Right, I can go back to custom rom, but stock rom wont boot, any suggestions?
please try to elaborate the exact steps that you have done to get to that situation.
if you are now flashing back to stock rom. try this, flash stock firmware using odin, once done dont reboot. straigth boot into recovery mode, and wipe data factory reset. then boot.
ive got the same problem. i installed cyanogenmod 10 on and it worked fine but couldnt get to wipe the internal sd card so still had stuff from past roms on. I thought if i flash back to stock then it would clear it all then i could reflash back to cyanogen 10.
i flashed the stock in odin and it wont go past the samsung logo. cant get into the recovery mode to wipe cache as it just resets back to boot screen and cant use the samsung toolkit as i cant get into usb debugging mode as cant get it to boot
any help really appreciated
matt
kingjamin said:
I tired to install a rom on to my samsung GT I9300 s3 and I must of done something wrong, now my phone wont go pass the boot logo screen , I have wiped the dalvik cache, wipe cache, wipe user data/ factory reset using CWM but it still doesnt work. Im from the uk on network o2.
any help is much appreciated.
Thank you
Click to expand...
Click to collapse
I had this issue before. Phone is stuck at samsung logo. I reflashed stock lfb firmware and cf root. Cleared data/cache/dalvik. Then it worked fine.
If every recovery method fails then only resort is to visit service center, go there and act dumb and state phone went crazy and this happened out of no where.If they wont find out that you've f***ked it up then you will get mo-board replacement.
Flash stock LFB from samfirmware.com through Odin.
Then flash Siyahkernel (also through Odin)
Pull the battery for 5 minutes
Press and hold vol-up + home buton
Press power button until screen lights up
You should be in cwm now. Factoryreset your phone and it should startup again
If you don't want to loose your data, instead of factory reset you can try using adb shell and run e2fsck on the block device for /data
Corrupt ext-Partitions are usually the reason for a softbrick
Sent from my GT-I9300 using xda premium
Try rooting it again
Sent from my GT-I9300 using xda app-developers app
d4fseeker said:
Flash stock LFB from samfirmware.com through Odin.
Then flash Siyahkernel (also through Odin)
Pull the battery for 5 minutes
Press and hold vol-up + home buton
Press power button until screen lights up
You should be in cwm now. Factoryreset your phone and it should startup again
If you don't want to loose your data, instead of factory reset you can try using adb shell and run e2fsck on the block device for /data
Corrupt ext-Partitions are usually the reason for a softbrick
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
This works, thank you!
iptelesys said:
This works, thank you!
Click to expand...
Click to collapse
I too am having this issue! Which stock LFB should I use? Under country the latest is Hungarian! Does that mean all my stuff will be in hungarian? Please let me know as I need to use my phone tomorrow at the latest!
Thanks,
Inous
Yiu can flash that. Just change language to English
Sent from my GT-I9300 using xda app-developers app
solution to a bricked S3
Sent from my GT-I9300 using xda app-developers app[/QUOTE]
I encountered the same problem. I almost fainted when I can't solve the problem. Finally I did. this is what I did:
1. download the Stock Rom (depends which country and carrier you are) Unzip the downloaded file and you should have .md5 file that you will later use.
2. download ODIN
3. Launch ODIN click on "PDA button" select the .md5 that you extracted (the file you downloaded and unzipped) and click start and wait until it finished (hopefully this will solve your problem but in my case ... the samsung logo still is stucked so continue with my next steps)
4. download the CF Root from
note: this will install the CWM or recovery mode for your phone that will give you several options ...
5. use ODIN again and click PDA button and select the CF Root that you have downloaded and click on start until it finished.
6. boot to Recovery mode by holding "volume up (yes volume up and not volume down)" and "power" and "home button" all at the same time until recovery mode reappears.
7. go to advanced and remove dalvik cache, do a wipe out or factory reset, wait for your phone to restart ... wait a minute or two and your phone is back to normal.
Ignore
Sent from my GT-I9300 using xda premium
fergusso said:
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I encountered the same problem. I almost fainted when I can't solve the problem. Finally I did. this is what I did:
1. download the Stock Rom (depends which country and carrier you are) Unzip the downloaded file and you should have .md5 file that you will later use.
2. download ODIN
3. Launch ODIN click on "PDA button" select the .md5 that you extracted (the file you downloaded and unzipped) and click start and wait until it finished (hopefully this will solve your problem but in my case ... the samsung logo still is stucked so continue with my next steps)
4. download the CF Root from
note: this will install the CWM or recovery mode for your phone that will give you several options ...
5. use ODIN again and click PDA button and select the CF Root that you have downloaded and click on start until it finished.
6. boot to Recovery mode by holding "volume up (yes volume up and not volume down)" and "power" and "home button" all at the same time until recovery mode reappears.
7. go to advanced and remove dalvik cache, do a wipe out or factory reset, wait for your phone to restart ... wait a minute or two and your phone is back to normal.[/QUOTE]
THANKS A MILLION DUDE!
really sorry =$
it worked!!!! thank you so much!!!!
d4fseeker said:
Flash stock LFB from samfirmware.com through Odin.
Then flash Siyahkernel (also through Odin)
Pull the battery for 5 minutes
Press and hold vol-up + home buton
Press power button until screen lights up
You should be in cwm now. Factoryreset your phone and it should startup again
If you don't want to loose your data, instead of factory reset you can try using adb shell and run e2fsck on the block device for /data
Corrupt ext-Partitions are usually the reason for a softbrick
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
My galaxy y stuck on samsung galaxy y logo and cant mount data
MY rom isHyperion 7 Golden Master Final custom ROM for galaxy y GT-s5360.When I try to use the live wallpaper of hyperion 7 my galaxy y hangs and i try to pull the battery then i turn on but its stuck in samsung galaxy y logo then i used the recovery mode wipe data but it still nothing
plzzzz help me
alimocs said:
MY rom isHyperion 7 Golden Master Final custom ROM for galaxy y GT-s5360.When I try to use the live wallpaper of hyperion 7 my galaxy y hangs and i try to pull the battery then i turn on but its stuck in samsung galaxy y logo then i used the recovery mode wipe data but it still nothing
plzzzz help me
Click to expand...
Click to collapse
this is not a Galaxy Y forum, but you can try a different rom. Cheers.
I got this S2 from UK my brother sent it and he had installed custom ROM on it.
I did a factory reset on it and after that the device didn't start.
My bro told me to install Siyah Kernal to make it work again but unfortunately after installing the Kernal i am stuck in Resurrection Remix screen.
WHAT SHOULD I DO NOW?
kaiyan1 said:
I got this S2 from UK my brother sent it and he had installed custom ROM on it.
I did a factory reset on it and after that the device didn't start.
My bro told me to install Siyah Kernal to make it work again but unfortunately after installing the Kernal i am stuck in Resurrection Remix screen.
WHAT SHOULD I DO NOW?
Click to expand...
Click to collapse
download any rom you want like
CM10 or any other flash in recover then do a wipe
or flash stock rom via PC odin
kaiyan1 said:
I got this S2 from UK my brother sent it and he had installed custom ROM on it.
I did a factory reset on it and after that the device didn't start.
My bro told me to install Siyah Kernal to make it work again but unfortunately after installing the Kernal i am stuck in Resurrection Remix screen.
WHAT SHOULD I DO NOW?
Click to expand...
Click to collapse
Next time post questions in Q & A thread,, BTW dont panic. Download any ROM, then wipe data, cache and in advance, wipe dalvik, Install zip from SD card. Done ur phone ll boot up.. If this doesnt help then final is flash thru ODIN check the baseband of the phone then download from SAMFIRMWARE
After a full wipe (data/cache/dalvik), you should also format the /system partition and the internal SD card (save important files before). Then flash or install via recovery the ROM and everything should be ok.
Thank you everyone but when i press the power+volume dwn+home button it takes me to odin mode but not the normal screen from where i can wipe/format and do other stuff. How can i go to that recovery screen?
kaiyan1 said:
Thank you everyone but when i press the power+volume dwn+home button it takes me to odin mode but not the normal screen from where i can wipe/format and do other stuff. How can i go to that recovery screen?
Click to expand...
Click to collapse
It's volume up home and power to get into recovery
Sent from my GT-I9100 using xda app-developers app
kaiyan1 said:
Thank you everyone but when i press the power+volume dwn+home button it takes me to odin mode but not the normal screen from where i can wipe/format and do other stuff. How can i go to that recovery screen?
Click to expand...
Click to collapse
Volume up + home button + power button simultaneously. hold all of them until the samsung logo appears, then just leave the power button. Should boot into recovery.
Sent from my GT-I9100 using Tapatalk 2
Prashanthme said:
Next time post questions in Q & A thread,, BTW dont panic. Download any ROM, then wipe data, cache and in advance, wipe dalvik, Install zip from SD card. Done ur phone ll boot up.. If this doesnt help then final is flash thru ODIN check the baseband of the phone then download from SAMFIRMWARE
Click to expand...
Click to collapse
thank you for the help phone is up now
Okay, So.. As the title says, i have googled for DAYS, Tried every damn thing i could get my hands on..
Now.
So far, im able to get into download mode, and also into recovery mode, I've tried doing a factory reset, and then flashing a stock rom, and i've tried every concevable method of fixing this damned phone, Its driving me crazy, I flash a new rom with odin, phone reboots, (adds to count) and is STILL stuck at that ****ty flashing samsung logo..
I'd really appreciate ANY help i can get, And i AM a noob at this, So i dont FULLY understand EVERY detail of this, But i've read around enough to know a few things.
My SGS3 has been out of commision for longer than i've actually used it.. So.. Yeah, Getting quite desperate!
Please let me know if there are any particular details yyou need!
Hi,
Your problem is EFS.IMG
Please clear it. Use Odin3 for that.
Boot into recovery and wipe data/factory reset, after you've flashed your ROM.
I had your problem some weeks ago,I finally managed to get arround this after I deleted the dalvik cache and flashed stock rom trough odin,and worked like a charm :good:
try this first before thinking of efs errors!
.
exprxp said:
Hi,
Your problem is EFS.IMG
Please clear it. Use Odin3 for that.
Click to expand...
Click to collapse
Please elaborate, How would i do this with odin?
Boot into recovery and wipe data/factory reset, after you've flashed your ROM.
Click to expand...
Click to collapse
Pretty sure that i've done this by accident, But will try again to be 100% sure, Ill get back to you.
I had your problem some weeks ago,I finally managed to get arround this after I deleted the dalvik cache and flashed stock rom trough odin,and worked like a charm
try this first before thinking of efs errors!
Click to expand...
Click to collapse
Again, Please elaborate, How do i go about doing this, I've never seen an option to delete the 'Dalvik cache'
Thank so damn much for the help so far guys, i really appreciate it!
Cam't really help you with the EFS, but:
-bootloops are often fixed by installing rom then wiping data+cache from recovery as others said
-the dalvik cache can be wiped in the recovery, you can find "wipe dalvik cache" under the advanced submenu
loriz said:
Cam't really help you with the EFS, but:
-bootloops are often fixed by installing rom then wiping data+cache from recovery as others said
-the dalvik cache can be wiped in the recovery, you can find "wipe dalvik cache" under the advanced submenu
Click to expand...
Click to collapse
Im in recovery mode right now (Vol UP+ Home + Power)? And i dont see an 'Advanced' menu option;
Options i DO have: reboot system now; apply update from ADB; apply update from external storage; wipe data/factory reset; wipe cache parition;
apply update from cache..
Any ideas?
These options are only available in a custom recovery.
Just try wipe --> flash stock room --> wipe
Bäcker said:
These options are only available in a custom recovery.
Just try wipe --> flash stock room --> wipe
Click to expand...
Click to collapse
i just want to clarify... when you say 'flash STOCK rom' Do you mean i need to get a rom for a SGS3 VAU (Vodafone Asutralia) and flash that (go to odin, put it in PDA, etc)
and if THAT is the case.. Where would i get said rom, Because i've downloaded it from sammy firmware 4 times, each time it finishes the download without a hitch, when i go to extract the zip to get the needed files, it says its corrupted or some such BS..
Go to Sam mobile and download the firmware mate.
You will end up with a tar md5 file you flash using PDA section of Odin.
Good luck!
Sent from my GT-I9305 using xda app-developers app
Kies is by far the easiest and safest way to factory reset. I have had to use it about 3 times in the past 6 months because I have flashed something I shouldn't have. Plus Kies now has a lite mode that is quicker at flashing your phone back to stock firmware.
serbpower said:
Im in recovery mode right now (Vol UP+ Home + Power)? And i dont see an 'Advanced' menu option;
Options i DO have: reboot system now; apply update from ADB; apply update from external storage; wipe data/factory reset; wipe cache parition;
apply update from cache..
Any ideas?
Click to expand...
Click to collapse
Slightly puzzled by you not having an "advanced" menu option. Which CWM version do you have?
Okay guys it seems ive fixxed my s3, after 4 long months lol..
What i did:
Installed Kies, Got my phone into download mode, Let kies to a PROPER wipe of the phone, (Phone, pds, csc) and it just ****ing straight up fixed everything...now i just need to find a thread that shows me how to COMPLETELY backup my ENTIRE phone, Every damn fkn Kb.. And ill be rooting it again lol
Thanks everyone!
Please I need help guys! I earlier today rooted my Samsung Galaxy S3 international variant i9300. After this I went about to install a custom ROM the Cyanogen Mod 10.1 4.2.2 rom, and to do this I followed the this method on YouTube:
After I completed the installation I it showed the Cyanogen Mod logo which looked amazing but after this I kept getting "unfortunately setup wizard has stopped" and "unfortunately google framework services has stopped". I am sure that I maybe installed the older version of gapps and this is why this is happening. How can I fix this issue?
Please help! I have tried almost everything!
Thank you!!!
wrong gapps. wipe system and repeat with the correct ones
Please, I know it may seem like I am a some n00b who just registered for answers, but I really need them. I've been browsing this forum (unregistered) but just haven't had anything to post as of late. Sorry guys, I really need help! And you members are the ONLY ones I can turn to at this moment.
Thanks so much, I really appreciate any help!
Glebun said:
wrong gapps. wipe system and repeat with the correct ones
Click to expand...
Click to collapse
Hey dude, cheers for the reply!!
How can I wipe the system? I've tried through the recovery menu, I selected wipe data/factory reset and wipe cache partition. Still got the same thing. Do I have to install stock firmware via Odin??
Thanks mate, I'm just going full retard over here from all of this pressure that I'm feeling right now.
format system from recovery. Google it. then re flash the rom with the correct gapps
Glebun said:
format system from recovery. Google it. then re flash the rom with the correct gapps
Click to expand...
Click to collapse
Hey dude, I've selected wipe data/factory reset and wipe cache partition. Still got the same thing.
Unless hard factory reset is something else??
Please help!
killakk said:
Hey dude, cheers for the reply!!
How can I wipe the system? I've tried through the recovery menu, I selected wipe data/factory reset and wipe cache partition. Still got the same thing. Do I have to install stock firmware via Odin??
Thanks mate, I'm just going full retard over here from all of this pressure that I'm feeling right now.
Click to expand...
Click to collapse
In advanced format system
Sent from my GT-I9300 using xda premium
killakk said:
Hey dude, I've selected wipe data/factory reset and wipe cache partition. Still got the same thing.
Unless hard factory reset is something else??
Please help!
Click to expand...
Click to collapse
I said nothing about a factory reset. I said "wipe system". A google search would give you the answer
Glebun said:
I said nothing about a factory reset. I said "wipe system". A google search would give you the answer
Click to expand...
Click to collapse
Sorry dude, you've got me confused. I've googled that to no avail, sorry for being a n00b. I really need your help mate!
Ver3go said:
In advanced format system
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Hey dude, thanks for the reply but how can I go to Advanced Format System pal??
I'm sorry but I'm a n00b and my phone does not start up, keep getting the cyanogen mod logo and after that the errors "unfortunately setup wizard has stopped" and "unfortunately google framework services has stopped".
Please help!
Sorry guys I know I'm making it hard on you all because you're having to explain everything to me but I really need help on this, sorry if I'm being a nuisance but I'm really going crazy in the head right now
killakk said:
Please I need help guys! I earlier today rooted my Samsung Galaxy S3 international variant i9300. After this I went about to install a custom ROM the Cyanogen Mod 10.1 4.2.2 rom, and to do this I followed the this method on YouTube:
After I completed the installation I it showed the Cyanogen Mod logo which looked amazing but after this I kept getting "unfortunately setup wizard has stopped" and "unfortunately google framework services has stopped". I am sure that I maybe installed the older version of gapps and this is why this is happening. How can I fix this issue?
Please help! I have tried almost everything!
Thank you!!!
Click to expand...
Click to collapse
wiping from CWM recovery or stock samsung recovery?
googled "format system recovry", got this
www.addictivetips.com/mobile/what-i...-and-how-to-use-it-on-android-complete-guide/
Glebun said:
googled "format system recovry", got this
www.addictivetips.com/mobile/what-i...-and-how-to-use-it-on-android-complete-guide/
Click to expand...
Click to collapse
Cheers mate! But I can't access my mobile phone so how could I install ClockworkMod Recovery? It keeps giving me the error messages.
sriram231092 said:
wiping from CWM recovery or stock samsung recovery?
Click to expand...
Click to collapse
Hey dude, I've tried this already using stock samsung recovery, still to no avail. Getting same thing.
killakk said:
Cheers mate! But I can't access my mobile phone so how could I install ClockworkMod Recovery? It keeps giving me the error messages.
Hey dude, I've tried this already using stock samsung recovery, still to no avail. Getting same thing.
Click to expand...
Click to collapse
flash CWM touch recovery(latest ones) via desktop odin. then put your CM10.1 and latest gapps .zip files on your sdcard. reboot into CWM touch recovery and then flash the files after wiping data, cache and dalvik cahce!
We all were noobs at some point i'll help u out
Lets start from top.
To get cwm:
- flash cwm or twrp from odin ( i'll trust u know how to do that ) ( go for cwm this time )
To get phone up and running on cm:
-Re-download cm and respective gapps
-Turn off your phone
-Turn your phone on into recovery by pressing power+center+vol down (when the phone boots release power) and you'll be on cwm
-conect your phone to pc
-on cwm go to advanced settings
- mount usb storage
- phone will apear on pc, copy rom and gapps
- once done return to main "page" of cwm and wipe data/factory reset
- then install zip and select the rom zip first after zip is installed install gaps
- reboot phone after
- you'll be just fine
If that dont work out will talk about that later.
Take care
Sent from my GT-I9300 using xda premium
Ver3go said:
We all were noobs at some point i'll help u out
Lets start from top.
To get cwm:
- flash cwm or twrp from odin ( i'll trust u know how to do that ) ( go for cwm this time )
To get phone up and running on cm:
-Re-download cm and respective gapps
-Turn off your phone
-Turn your phone on into recovery by pressing power+center+vol down (when the phone boots release power) and you'll be on cwm
-conect your phone to pc
-on cwm go to advanced settings
- mount usb storage
- phone will apear on pc, copy rom and gapps
- once done return to main "page" of cwm and wipe data/factory reset
- then install zip and select the rom zip first after zip is installed install gaps
- reboot phone after
- you'll be just fine
If that dont work out will talk about that later.
Take care
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
May the lord praise thou, I am indebted towards your wisdom and kindness. You shall forever be one of my masters!
Thank you so much!
sriram231092 said:
flash CWM touch recovery(latest ones) via desktop odin. then put your CM10.1 and latest gapps .zip files on your sdcard. reboot into CWM touch recovery and then flash the files after wiping data, cache and dalvik cahce!
Click to expand...
Click to collapse
Thank you so very much dude, I love you!
killakk said:
May the lord praise thou, I am indebted towards your wisdom and kindness. You shall forever be one of my masters!
Thank you so much!
Thank you so very much dude, I love you!
Click to expand...
Click to collapse
:good: :good:
killakk said:
Cheers mate! But I can't access my mobile phone so how could I install ClockworkMod Recovery? It keeps giving me the error messages.
Click to expand...
Click to collapse
next time, this is how you solve problems:
http://lmgtfy.com/?q=how+to+install+cwm
Glebun said:
next time, this is how you solve problems:
http://lmgtfy.com/?q=how+to+install+cwm
Click to expand...
Click to collapse
This was already solved
What was that post for anyway ?
Do have any need to pick on them i dont like spoon feeding aswell and i dont go poking them! There's otherways for them to learn!
Take that into acount next time please.
Take care
Sent from my GT-I9300 using xda premium
Ver3go said:
This was already solved
Click to expand...
Click to collapse
hence the "next time"
Ver3go said:
What was that post for anyway ?
Click to expand...
Click to collapse
for showing him how easy it is to solve problems yourself instead if asking
Ver3go said:
Do have any need to pick on them i dont like spoon feeding aswell and i dont go poking them! There's otherways for them to learn!
Click to expand...
Click to collapse
I didn't pick on him nor was I being aggressive. Searching is THE BEST way to learn.