Hello XD
I have a SGS3 its keep rebooting by its self. ( i can go in the phone but after some mins its rebooting)
and i have tryed alot of roms but still dos it..
i come from denmark and use xxblh3
but if i install Stock rom its not booting past the samsung logo
any1 that know whats rong ?
jimminez said:
Hello XD
I have a SGS3 its keep rebooting by its self. ( i can go in the phone but after some mins its rebooting)
and i have tryed alot of roms but still dos it..
i come from denmark and use xxblh3
but if i install Stock rom its not booting past the samsung logo
any1 that know whats rong ?
Click to expand...
Click to collapse
Did you tried making a factory reset (data wipe) from the recovery?
yes reset ยจ+ catch and the ohter one in advance
Make sure you flash the right kernel.. if your rom is based on JB, then flash a JB kernel. Otherwise, you will be stuck on bootloop (as in what situation you are in now(
Sent from my GT-I9300 using xda premium
im not in bootloop.. i can boot to the phone and use apps and that but its rebooting by its self after some mins
hey
You have to flash another kernel. Mine did the same.
Im also fron DK, and I assume you have the I9300 intl?
If your current ROM is a JB, then try flashing siyah kernel.
Works fine with mine
i got it to work but dont know how lol..
Oh. I thought you were on bootloop since you stated that you couldnt go past the samsung logo. Lol. Good to hear you got it sorted out
Sent from my GT-I9300 using xda premium
Related
Hello,
I tried flashing CyanogenMod 7.1 onto my SGS2.
Cyanogenmod needs two times flashing in order for it to flash succesfull.
I only did once... and rebooted...
Now.. my SGS2 is practically dead...
It won't go past the Samsung Galaxy SII Logo which you get at startup.
Is there ANY way to fix this?
I've tried flashing my old XWDD_Insecure and i've also tried flashing Official Samsung kernel but i can't get my phone to boot properly. (I'm noob, i probably don't even have to do this, i just don't know)
Does anyone know ANY fix for this? (just to get it to boot normal again?)
Why are you starting a new thread?
Keep it in one place and everyone can see the advice you're still ignoring.
http://forum.xda-developers.com/showthread.php?t=1334709
oinkylicious said:
Why are you starting a new thread?
Keep it in one place and everyone can see the advice you're still ignoring.
http://forum.xda-developers.com/showthread.php?t=1334709
Click to expand...
Click to collapse
you know oink i really like you, your so fast when it comes to answering our queries here. keep it up!
if bricked use jig!
When your phone boots up it's not hard bricked.. Flashing official kernel won't help either because cm7 kernel and sammy's kernel is different.. Why don't you just flash a fresh firmware or restore your backup if you have one or just install cm7 again..
Sent from my GT-I9100 using xda premium
looked at similar threads but not found what im looking for
i tried a new rom last night whih made my phone freeze and trying i could reboot as after 2 seconds it would hang. ended up flashing firmwre via odi which was fine.
tonight tried to reroot my phone using the S3 toolkit which i used fist time round. everything seemed to go as planned but then when it came to reboot.. s3 toolkit aid all successful but i was getting a black screen.
i can hear the samsung logo load up but cant see it.
I can boot into recovery and download mode. what do I do??.. reflash latest 4.1.1 firmware via Odin?
If this works how best to go about rooting as i dont know if i want to try the s3 toolkit again if it clearly didnt work (although all messages pointed to that it did)
Thanks in advance
Kobrax said:
looked at similar threads but not found what im looking for
i tried a new rom last night whih made my phone freeze and trying i could reboot as after 2 seconds it would hang. ended up flashing firmwre via odi which was fine.
tonight tried to reroot my phone using the S3 toolkit which i used fist time round. everything seemed to go as planned but then when it came to reboot.. s3 toolkit aid all successful but i was getting a black screen.
i can hear the samsung logo load up but cant see it.
I can boot into recovery and download mode. what do I do??.. reflash latest 4.1.1 firmware via Odin?
If this works how best to go about rooting as i dont know if i want to try the s3 toolkit again if it clearly didnt work (although all messages pointed to that it did)
Thanks in advance
Click to expand...
Click to collapse
Hi,
I would flash the last stock rom via odin. (I9300XXDLJ4) UK BTU
Then I would root using the chainfire topic here (http://forum.xda-developers.com/showthread.php?t=1695238)
I hope it helps! Good luck!
Regards.
yeh done this about an hour ago and opted for Cf root.
now just trying to find a good stable Rom.. had omega from day I rooted. great rom but at the end the battery drain was unreal
I Like Wanamlite Rom. Give a try!
Cheers
Kobrax said:
yeh done this about an hour ago and opted for Cf root.
now just trying to find a good stable Rom.. had omega from day I rooted. great rom but at the end the battery drain was unreal
Click to expand...
Click to collapse
Foxhound is great. But i have to say stock is better for me. Just use nova launcher then freeze all the bloatwares ising TBpro to set free your RAM. All smooth for me.
Sent from my GT-I9300 using xda premium
ramsorriso said:
I Like Wanamlite Rom. Give a try!
Cheers
Click to expand...
Click to collapse
+1 for WanamLite, really lite and quick and stock looking.
Hi everyone,
I bought my international version last year June , and everything went well as soon as I upgrade to 4.1.2. My csc is TPA I guess is from Panama. Anyway, I felt a little laggy and then I flashed custom rom ( always stock rom before). I flashed omega, wanalite, aokp, liquidsoomth and so on. At first I suffered from sudden death or frozen (I have to press power button until it reboot), I thought it might because custome rom is not stable as stock, but so many roms that I've tried all have the same problems. Then I knew there is Sds problem, but even I flash those custom kernel to fixed it, some times still sudden death or frozen. Can anyone give some ideas to fix this? And I found that google apps cause death and frozen as well.
Thank you guys, I need this help.
Sudden death does not equal freeze afaik. It means your phone dying completely. As for freezing, if you didn't get any freezes from stock, I suggest you leave it on stock.
Sent from my GT-I9300 using xda premium
Ggcoolz said:
Hi everyone,
I bought my international version last year June , and everything went well as soon as I upgrade to 4.1.2. My csc is TPA I guess is from Panama. Anyway, I felt a little laggy and then I flashed custom rom ( always stock rom before). I flashed omega, wanalite, aokp, liquidsoomth and so on. At first I suffered from sudden death or frozen (I have to press power button until it reboot), I thought it might because custome rom is not stable as stock, but so many roms that I've tried all have the same problems. Then I knew there is Sds problem, but even I flash those custom kernel to fixed it, some times still sudden death or frozen. Can anyone give some ideas to fix this? And I found that google apps cause death and frozen as well.
Thank you guys, I need this help.
Click to expand...
Click to collapse
Wipe rom / format in recovery flash stock rom .
jje
xcly said:
Sudden death does not equal freeze afaik. It means your phone dying completely. As for freezing, if you didn't get any freezes from stock, I suggest you leave it on stock.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I get freezes from stock rom as well , not rooted
Then I'd suggest you go visit a service centre.
Sent from my GT-I9300 using xda premium
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
sinsai said:
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
Click to expand...
Click to collapse
Did u update via kies or odin?
If u used a firmware and flashed via odin, please try another firmware.
Over this try to do a factory reset after u flashed the FW.
CHEERS
sinsai said:
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screkeen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
Click to expand...
Click to collapse
Well your phone is i9100g... You sure you flashed ROM of i9100g and not of galaxy s2 i9100...coz many people make that mistake..
Post this in the i9100g...idk how much we can help you with this..
Anyways, try factory resetting the phone...if no luck take it to Samsung customer care...it can be a hardware problem. ..
And ya, which ROM are you flashing? The official stock ROM or custom ROM?
Custom ROM do have many bugs and vary from phone to phone. .. Try going to stick for one and check if problem is still there. .
Press thanx if I helped...
Hannibal226 said:
Did u update via kies or odin?
If u used a firmware and flashed via odin, please try another firmware.
Over this try to do a factory reset after u flashed the FW.
CHEERS
Click to expand...
Click to collapse
update via odin...trying both 3.07 and 1.85
i use firmware on this post http://forum.xda-developers.com/showthread.php?t=1679636
and done factory reset every time before and after done flashing...
after done several times flashing, im still facing touchscreen problem...
the weardest is the problem fix when i plugin charger...
umair241995 said:
Well your phone is i9100g... You sure you flashed ROM of i9100g and not of galaxy s2 i9100...coz many people make that mistake..
Post this in the i9100g...idk how much we can help you with this..
Anyways, try factory resetting the phone...if no luck take it to Samsung customer care...it can be a hardware problem. ..
And ya, which ROM are you flashing? The official stock ROM or custom ROM?
Custom ROM do have many bugs and vary from phone to phone. .. Try going to stick for one and check if problem is still there. .
Press thanx if I helped...
Click to expand...
Click to collapse
cannot post on i9100g dev becoz my post still under 10...
im sure i flash the right rom from http://forum.xda-developers.com/showthread.php?t=1679636
ya..done factory reset but still got the problem...
like i said before..the touchscreen work fine if i plugin charger or connect usb to pc/laptop...
i dont think it becoz hardware problem since it work perfect on stock GB, stock ICS, aokp, CM and 4-5 other custom ROM...
can it becoz of battery? i use 1650mah...i have try 1500mah and touch screen getting more worst...
i still cant find any solution for my phone..
already try many method like
- using re-partion on odin with pit file
- format data, system, cache, emmc
- wipe data/factory reset/dalvic cache
- flash using odin/cwm
- root/unroot
after done all above..touch screen laggy and still make dash line on drawing...
after my last post...i have try most rom on Galaxy S II I9100G Android Development Section and my touchscreen on all rom are working perfect except official stock JB or custom rom base on stock JB...
forgot to mention that the day on my 1st time installing stock JB i accidently flash Galaxy tab 2 p3100 firmware and got softbrick
but successfuly unbrick then done flashing stock JB...dunno if this incident can damage my phone...
or is other way to make FULL FORMAT internal SD? to make sure the file that i accidently flash completely remove...
sinsai said:
i still cant find any solution for my phone..
already try many method like
- using re-partion on odin with pit file
- format data, system, cache, emmc
- wipe data/factory reset/dalvic cache
- flash using odin/cwm
- root/unroot
after done all above..touch screen laggy and still make dash line on drawing...
after my last post...i have try most rom on Galaxy S II I9100G Android Development Section and my touchscreen on all rom are working perfect except official stock JB or custom rom base on stock JB...
forgot to mention that the day on my 1st time installing stock JB i accidently flash Galaxy tab 2 p3100 firmware and got softbrick
but successfuly unbrick then done flashing stock JB...dunno if this incident can damage my phone...
or is other way to make FULL FORMAT internal SD? to make sure the file that i accidently flash completely remove...
Click to expand...
Click to collapse
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Touch not responding properly
gastonw said:
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Click to expand...
Click to collapse
I have this problem to.
Any news about this?
---------- Post added at 01:53 AM ---------- Previous post was at 01:43 AM ----------
gastonw said:
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Click to expand...
Click to collapse
I have this problem to.
Any news about this?
I dunno, I don't have an I9100G.
Sent from the little guy
you could try Blazing Kernel, it can be flashed via stock recovery. http://forum.xda-developers.com/showthread.php?t=2113545.
Or you could also flash original GB and upgrade to JB either through OTA or KIES.
acse1 said:
you could try Blazing Kernel, it can be flashed via stock recovery. http://forum.xda-developers.com/showthread.php?t=2113545.
Or you could also flash original GB and upgrade to JB either through OTA or KIES.
Click to expand...
Click to collapse
I have tried that two methods, Flashing GB (everything works great), flashing ICS (everything works great too), and then JB trough OTA and the touch screen doesnt work properly. I have tried the last Blazing Kernel too without success.
Thanks for the help.
Any ideas?
Try stock kernel. Customs aren't ready yet.
Sent from the little guy
gastonw said:
Try stock kernel. Customs aren't ready yet.
Sent from the little guy
Click to expand...
Click to collapse
The stock Kernel file is already on the Stock JB Odin file?
Like these : http://forum.xda-developers.com/showthread.php?t=1679636
Indeed it is.
Sent from the little guy
gastonw said:
Indeed it is.
Sent from the little guy
Click to expand...
Click to collapse
Dosent work either. :/
We have the same problem dude, touch screen not working properly after stock jb (xef) flash but working flawlessly when phone is plugged. I can't have a custom rom above 4.2.1, else I have the problem. Now I'm on CM10.1 4.2.1 and can't leave it because of this, the official rom I want is the official.
Did you got the screen of your phone replaced ? Because mine was and I was wondering if it was that.
samstacle said:
We have the same problem dude, touch screen not working properly after stock jb (xef) flash but working flawlessly when phone is plugged. I can't have a custom rom above 4.2.1, else I have the problem. Now I'm on CM10.1 4.2.1 and can't leave it because of this, the official rom I want is the official.
Did you got the screen of your phone replaced ? Because mine was and I was wondering if it was that.
Click to expand...
Click to collapse
Not sure if it was replaced because I bought it used on ebay.
But are you using CM10.1 4.2.1 without touch screen problems? Can you tell me the date of the release so I can try to flash my phone with that ROM?
Thanks
Yeah without touch screen problem. It's 20130213 nightly
Sent from my GT-I9100G using xda app-developers app
samstacle said:
Yeah without touch screen problem. It's 20130213 nightly
Sent from my GT-I9100G using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply.
I just find the 20130214. Is that one? I will try it.
recently after using sgs3 rom for 2 weeks, i came back to stock rom and then again i wont to go back to sgs3 v4.0 but when i installed that rom and rebooted my phone its getting stuck at my phone's name showing SAMSUMG GALAXY ACE GT-S5830i and i left it there for hours even though it's stuck like that i tried going back to stock rom and then tried to flash the rom but same result i tried mounting and unmounting the system but no use , please let me know a way to solve this even i tried to install mindcr 2.9 rom but same result
anyone please help me
Don't Worry
akhilkumarco007 said:
recently after using sgs3 rom for 2 weeks, i came back to stock rom and then again i wont to go back to sgs3 v4.0 but when i installed that rom and rebooted my phone its getting stuck at my phone's name showing SAMSUMG GALAXY ACE GT-S5830i and i left it there for hours even though it's stuck like that i tried going back to stock rom and then tried to flash the rom but same result i tried mounting and unmounting the system but no use , please let me know a way to solve this even i tried to install mindcr 2.9 rom but same result
anyone please help me
Click to expand...
Click to collapse
Hey Friend I can help you in SGS3 ROM by Sniper Killer see for installing his ROM,
First you got to stock ROM make it stable by using it for some hours make sure all is working properly eg. Dialler,Speaker etc
And then flash the sniper's Rom ok but if these also fails then just do these make the stock rom stable for 1 day and then at the time before flashing rom just root your phone and then flash the rom it will 1000% work because the same problem was facing for me too :good:
Hitesh2626 said:
Hey Friend I can help you in SGS3 ROM by Sniper Killer see for installing his ROM,
First you got to stock ROM make it stable by using it for some hours make sure all is working properly eg. Dialler,Speaker etc
And then flash the sniper's Rom ok but if these also fails then just do these make the stock rom stable for 1 day and then at the time before flashing rom just root your phone and then flash the rom it will 1000% work because the same problem was facing for me too :good:
Click to expand...
Click to collapse
actually i installed that sgs3 yesterday so i finally installed stock yesterday itself and rooted it and used it till today afternoon then again i tried the above process but same result yar so i decided to post for help however thanx for your reply buddy
but now when i installed mindcr 2.8 its working but the problem is with sgs3 i guess
akhilkumarco007 said:
actually i installed that sgs3 yesterday so i finally installed stock yesterday itself and rooted it and used it till today afternoon then again i tried the above process but same result yar so i decided to post for help however thanx for your reply buddy
Click to expand...
Click to collapse
Your welcome dude but for sgs3 v5 spend some more time on stock it will sure work :good: some time the stock rom doesn't get stable that's why these things happens
Hitesh2626 said:
Your welcome dude but spend some more time on stock it will sure work :good: some time the stock rom doesn't get stable that's why these things happens
Click to expand...
Click to collapse
will try your advice and use for long time and try it again