i have a rooted thunderbolt with the mr2 radio running cyanogenmod 7 with its stock kernel. i have tried 2 times flashing a new kernel that is supposedly built for it. what i did was booted into recovery and used clockwork mod to flash the zip then rebooted. after that im stuck on the first white htc screen..... am i doing something wrong?
Did you check md5 sums? Possibly corrupt download? Maybe try downloading it again...
For some reason I can only run stock rooted on my Rezound. I've tried both Clockwork and Amon Ra with no success. I know how to flash ROMs, this is my 6th or 7th Android phone and my 3rd HTC Android phone.
I just relocked my bootloader and flash the stock RUU to restart from scratch and start over. Still, I can't flash ROMs. I put my ROM on the sd card, boot into recovery and wipe data/cache. Then I go into the boot loader and flash the kernel. Then, I just get stuck at the HTC screen forever. It's extremely frustrating considering I'm coming from the Galaxy Nexus where I was running an ICS ROM (not the stock one) and I thought the Rezound looked cool so I picked it up. But now I'm stuck on GB.
Am I doing something wrong or missing something? When I first unlocked the phone Saturday I tried to flash an ICS ROM but got stuck at the HTC screen. Then I flashed a different one successfully but it was buggy so I flashed a GB ROM and played with that for a little bit. After that I got stuck and couldn't flash anything without getting stuck at HTC, so I flashed a stock, rooted ROM and from then on that's all I've been able to use.
Edit: So I just tried manually flash the boot.img from the PH98IMG folder by doing fastboot flash boot boot.img and it successfully flashed yet I'm STILL stuck at the HTC screen.... The method ONLY works for the stock ROM for me.
skatingrocker17 said:
For some reason I can only run stock rooted on my Rezound. I've tried both Clockwork and Amon Ra with no success. I know how to flash ROMs, this is my 6th or 7th Android phone and my 3rd HTC Android phone.
I just relocked my bootloader and flash the stock RUU to restart from scratch and start over. Still, I can't flash ROMs. I put my ROM on the sd card, boot into recovery and wipe data/cache. Then I go into the boot loader and flash the kernel. Then, I just get stuck at the HTC screen forever. It's extremely frustrating considering I'm coming from the Galaxy Nexus where I was running an ICS ROM (not the stock one) and I thought the Rezound looked cool so I picked it up. But now I'm stuck on GB.
Am I doing something wrong or missing something? When I first unlocked the phone Saturday I tried to flash an ICS ROM but got stuck at the HTC screen. Then I flashed a different one successfully but it was buggy so I flashed a GB ROM and played with that for a little bit. After that I got stuck and couldn't flash anything without getting stuck at HTC, so I flashed a stock, rooted ROM and from then on that's all I've been able to use.
Edit: So I just tried manually flash the boot.img from the PH98IMG folder by doing fastboot flash boot boot.img and it successfully flashed yet I'm STILL stuck at the HTC screen.... The method ONLY works for the stock ROM for me.
Click to expand...
Click to collapse
What kernel's are you flashing and what roms ? I know I have ran into trouble with the anthrax kernel with having to flash a stock GB kernel first . It seems for me at least going from GB to ICS or vice versus I have the best luck using stock kernels first. Once, the rom is loaded it has been easy to switch to custom kernels.
So maybe make sure for the GB roms your flashing the stock , unsecured kernel and for ICS the " leaked kernel " that everyone is using for a base.
mjh68 said:
What kernel's are you flashing and what roms ? I know I have ran into trouble with the anthrax kernel with having to flash a stock GB kernel first . It seems for me at least going from GB to ICS or vice versus I have the best luck using stock kernels first. Once, the rom is loaded it has been easy to switch to custom kernels.
So maybe make sure for the GB roms your flashing the stock , unsecured kernel and for ICS the " leaked kernel " that everyone is using for a base.
Click to expand...
Click to collapse
I'm just flashing whatever kernel comes with the ROM. By that I mean the PH98IMG file that contains the boot.img. Or should I be actually flashing a kernel in recovery?
skatingrocker17 said:
I'm just flashing whatever kernel comes with the ROM. By that I mean the PH98IMG file that contains the boot.img. Or should I be actually flashing a kernel in recovery?
Click to expand...
Click to collapse
So your taking the boot.img out and flashing it in fastboot ? that should be fine . Otherwise , put the PH98IMG on the root of the SD card and flash the rom in recovery then reboot to the bootloader (Amon Ra) and let the PH98IMG flash the kernel then reboot phone.
Try one of the ICS ROM's that have the kernel built into the install and follow the instructions which is basically flash ROM in recovery, let it boot to bootloader, press power, vol up when asked etc.
If they offer a separate ph*.zip then it is not automatic
NilsP said:
Try one of the ICS ROM's that have the kernel built into the install and follow the instructions which is basically flash ROM in recovery, let it boot to bootloader, press power, vol up when asked etc.
If they offer a separate ph*.zip then it is not automatic
Click to expand...
Click to collapse
So I have been doing it right. I've done that many times and it hasn't worked. I'm messing around with other kernels now, I just flashed this kernel on my stock ROM and it's working, so maybe I can flash an ICS kernel on an ICS rom and everything will work. We'll see.
I installed CleanRom and the kernel it came with and it does one thing differently......... it boots to the HTC screen then after about 10 seconds it reboots back to recovery. This is driving me nuts, I can't flash ANY rom. CleanRom has never worked for me but I did manage to flash a few roms RIGHT after getting the phone on Friday.
I've only been able to successfully install BAMF Rezound Cubed 1.0.2 which is a GB ROM. I've tried to installed Ineffabilis v1.3 which is also a GB ROM but it remains stuck at the HTC screen.
I believe the only other ROM I've been able to flash successfully is Ineffabilis-Deus-v1.0.2-Odex-ICS 4.0.3 sense 3.6, which IS an ICS ROM.
skatingrocker17 said:
I installed CleanRom and the kernel it came with and it does one thing differently......... it boots to the HTC screen then after about 10 seconds it reboots back to recovery. This is driving me nuts, I can't flash ANY rom. CleanRom has never worked for me but I did manage to flash a few roms RIGHT after getting the phone on Friday.
I've only been able to successfully install BAMF Rezound Cubed 1.0.2 which is a GB ROM. I've tried to installed Ineffabilis v1.3 which is also a GB ROM but it remains stuck at the HTC screen.
I believe the only other ROM I've been able to flash successfully is Ineffabilis-Deus-v1.0.2-Odex-ICS 4.0.3 sense 3.6, which IS an ICS ROM.
Click to expand...
Click to collapse
I think BAMF Cubed changes/upgrades your mainver. You should get a "mainver is older" error when flashing the ph98. IMG. Is it possible that you got the error but didn't see it-looking away at the time? If so, the easiest way around the mainver issue -imo- is scott's cleanflash tool.
There are many threads about mainver issues. It may be worth checking.
Edit- I re-read the thread, I may be wrong, dunno.
CleanRom will reboot to fastboot after flashing, press power and wait a second or two to install the kernel. This won't work if you DO have the newer mainver.
Hope this was helpful.
Sent from my ADR6425LVW using xda premium
skatingrocker17 said:
I installed CleanRom and the kernel it came with and it does one thing differently......... it boots to the HTC screen then after about 10 seconds it reboots back to recovery. This is driving me nuts, I can't flash ANY rom. CleanRom has never worked for me but I did manage to flash a few roms RIGHT after getting the phone on Friday.
I've only been able to successfully install BAMF Rezound Cubed 1.0.2 which is a GB ROM. I've tried to installed Ineffabilis v1.3 which is also a GB ROM but it remains stuck at the HTC screen.
I believe the only other ROM I've been able to flash successfully is Ineffabilis-Deus-v1.0.2-Odex-ICS 4.0.3 sense 3.6, which IS an ICS ROM.
Click to expand...
Click to collapse
As far as Ineffabilis GB, I haven't updated to v1.3 but I can tell you for v1.0 it stays on the white HTC screen for quite a while before booting up. Maybe you didn't wait long enough?
feralicious said:
As far as Ineffabilis GB, I haven't updated to v1.3 but I can tell you for v1.0 it stays on the white HTC screen for quite a while before booting up. Maybe you didn't wait long enough?
Click to expand...
Click to collapse
So does CleanROM. First boot is a lesson in patience.
I put my ROM on the sd card, boot into recovery and wipe data/cache. Then I go into the boot loader and flash the kernel. Then, I just get stuck at the HTC screen forever.
Click to expand...
Click to collapse
It sounds like you're missing the part where you, you know, actually flash the ROM. The kernel zip and the ROM zip are separate; the kernel (normally found in PH98IMG.zip) is flashed in hboot/fastboot, the ROM (where the zip is called whatever) from recovery. It doesn't matter which order you flash them, but if you flash an ICS kernel and you try to boot before flashing the ICS ROM, for example, you'll get stuck on that white HTC screen when trying to boot.
Many ROMs have a script built in that when you flash the ROM in recovery it will create a PH98IMG.zip and automatically reboot you to the bootloader so you can flash the kernel. It is done this way because if you put the PH98IMG.zip on your sdcard and flash that first you'll have trouble getting back into recovery to flash the ROM after. The hboot won't let you select recovery with that file on the sdcard (obviously, reboot recovery from the OS/ADB still works, but if you reboot and flash the kernel first, you have no way into recovery without removing the sd card). I usually only copy the ROM to my sdcard (not the kernel) to prevent getting locked out of recovery. Go into recovery, wipe data/cache/dalvik, install zip from SD, select the ROM (not the PH98IMG.zip kernel), then reboot into the bootloader and manually fastboot flash boot boot.img. Obviously you don't have to do it that way, that's just my usual method.
Hope this helps somewhat.
feralicious said:
As far as Ineffabilis GB, I haven't updated to v1.3 but I can tell you for v1.0 it stays on the white HTC screen for quite a while before booting up. Maybe you didn't wait long enough?
Click to expand...
Click to collapse
I waited like 5 minutes, I know the initial boot process usually takes longer but it usually doesn't sit at the HTC screen for a long period of time, it just seems to hang on the boot animation but I can't even make it that far.
MrSmith317 said:
So does CleanROM. First boot is a lesson in patience.
Click to expand...
Click to collapse
All CleanRom does is sit at the HTC screen for about 5 or 6 seconds, then it restarts into recovery on it's own. Both the ICS and GB CleanRoms do this.
skourg3 said:
It sounds like you're missing the part where you, you know, actually flash the ROM. The kernel zip and the ROM zip are separate; the kernel (normally found in PH98IMG.zip) is flashed in hboot/fastboot, the ROM (where the zip is called whatever) from recovery. It doesn't matter which order you flash them, but if you flash an ICS kernel and you try to boot before flashing the ICS ROM, for example, you'll get stuck on that white HTC screen when trying to boot.
Many ROMs have a script built in that when you flash the ROM in recovery it will create a PH98IMG.zip and automatically reboot you to the bootloader so you can flash the kernel. It is done this way because if you put the PH98IMG.zip on your sdcard and flash that first you'll have trouble getting back into recovery to flash the ROM after. The hboot won't let you select recovery with that file on the sdcard (obviously, reboot recovery from the OS/ADB still works, but if you reboot and flash the kernel first, you have no way into recovery without removing the sd card). I usually only copy the ROM to my sdcard (not the kernel) to prevent getting locked out of recovery. Go into recovery, wipe data/cache/dalvik, install zip from SD, select the ROM (not the PH98IMG.zip kernel), then reboot into the bootloader and manually fastboot flash boot boot.img. Obviously you don't have to do it that way, that's just my usual method.
Hope this helps somewhat.
Click to expand...
Click to collapse
I am flashing the ROM. Most roms just put the PH98IMG then automatically take you to the bootloader to flash the kernal. I've done that, probably 10 times. Then I manually flash the kernel when required too.
Like I said, this is my 7th Android phone, 3rd of which being HTC. I've been flashing ROMs since December of 2009 when the original Droid was rooted. I'm not new to this, that's why I don't understand why I'm having such a difficult time.
I have a p7510 that is Canadian, but I have flashed an American 3.2 rom which I've rooted with CWM 5.5.04. I've been trying to load up Maple Syrup's Jellybean July 18 build. I first flashed this dirty. But I got the flashing X screen for like 15 minutes. Then I tried a different download of CWM 5.5.0.4 because my system was coming up on the computer as a p7500. I thought perhaps I had the wrong cwm. So I went back to 3.2 to do a clean wipe. I've done this twice, reflashing JB after I would root 3.2 again. I have had no luck getting JB to get beyond the flashing animation. Any advice?
Fix
HunchedoverPhone said:
I have a p7510 that is Canadian, but I have flashed an American 3.2 rom which I've rooted with CWM 5.5.04. I've been trying to load up Maple Syrup's Jellybean July 18 build. I first flashed this dirty. But I got the flashing X screen for like 15 minutes. Then I tried a different download of CWM 5.5.0.4 because my system was coming up on the computer as a p7500. I thought perhaps I had the wrong cwm. So I went back to 3.2 to do a clean wipe. I've done this twice, reflashing JB after I would root 3.2 again. I have had no luck getting JB to get beyond the flashing animation. Any advice?
Click to expand...
Click to collapse
OK, now I'm giving my self some advice, or sharing my wisdom. After about 5 or 6 attempts to flash JB with CWM 5.5.0.4, I finally decided to try 5.8....through rom manager. I should have known that this might work, because I had been having trouble backing up my files with 5.5, but it worked quite well with 5.8. Anyway, JB is running smoothly now. I found that Rom Manager with CWM 5.8 and a clean install did the trick.
Thanks again for the rom all you hard workers out there.
Well, this is what happened.
My phone was using cMiui 4.1.2 with the default kernel, and this morning I tried to flash CM7. I wiped everything as always before flashing, after I pushed reboot system and it got stuck in the "Galaxy s2" screen and keeps turning on and off endlessly.
I pulled out the battery, try to get back into recovery, but it hadn't been a successful attempt.
I stayed claim and flash back to stock 4.0.4 via Odin, god-bless I made it through.
I installed a custom kernel and flash to CM9 for temporarily use. Now I don't know what to do.
I really want to try the taste of CM7, please help.
Edit: I also tried various way of flashing, such as flash a codeworkx kernel before flashing, and flash back into GB 2.3.5 before flashing CM7, both didn't work out
it was making me crazy for weeks and here is the solution i found 5 minutes ago :
when it gets bootloop
go to download mod and flash siyah 2.6.14 via odin!
then it boots.
Hi, been lurking, great forum, seems like lots of help here.
History of what I have done
I am new to rooting and flashing roms. I followed a step by step guide on how to root my gt-i9100m and install custom rom. The custom rom was Rainbox v7. poor battery life, followed another guide and installed siya kernel which was not compatible. reloaded philz kernel, everything was fine. Tried to update to rainbox 8.3, got stuck in boot loop, did full backup and wipe prior. attempted a restore, still stuck in boot loop. recovery menu was siya recovery. enter recovery again after restore, now in philz? performed another recovery using philz recovery, still stuck in boot image loop with black screen in between. from philz recovery i re flashed rainbox v7 zip, and i seem to have fixed it.
What went wrong? How do I avoid doing this again, is there an updated rainbox that i can install?
Please help, also, I am not fully versed with the short terms you often use, please be patient.
When moving around JB aka Jelly Bean or from an ICS aka Ice cream sandwich -=or=- GB aka Ginger Bread to JB... flash that particular roms kernel (or compatible) before trying new rom or restoring nandroid aka... you get the picture
Sending...