PLEASE HELP s-off gon rong on evo 3d - HTC EVO 3D

i tried to s-off on my htc evo 3d gsm from rogers i unlocked the bootloader useing HTCdev and rooted it and when i tried to s-off use JuopunutBear wire trick it worked im s-off'ed but my phone is suck on the Arrow screen i tried the ROM / Data Recovery thing but all three ways but it just wont work theres always an ERROR. AGEN PLEASE HELP THANX
(SORRY FOR MY BAD SPILLING)

---

Try flashing a rom, do you still have recovery?
Otherwise: flash a recovery, do all of the things you would normally do.

---

klect said:
Try flashing a rom, do you still have recovery?
Otherwise: flash a recovery, do all of the things you would normally do.
Click to expand...
Click to collapse
i tried to flash a recovery but it just said
sending 'recovery' (6146 KB)... OKAY
writing 'recovery'... FAILED (remote: not allowed)
every time i trid to do it

---

What hboot do you have after achieving S-OFF? Does it says Locked or JuopunutBear? If locked flash JuopunutBear hboot. Instructions here:
http://unlimited.io/jbhboots.htm
Choose proper hboot!
After flashing jbear hboot you should be able to flash recovery.
And here you have troubleshooting guide:
http://unlimited.io/jbtroubleshooting.htm

---

c000ler said:
What hboot do you have after achieving S-OFF? Does it says Locked or JuopunutBear? If locked flash JuopunutBear hboot. Instructions here:
Choose proper hboot!
After flashing jbear hboot you should be able to flash recovery.
And here you have troubleshooting guide:
Click to expand...
Click to collapse
i have hboot 1.53.0007 i had that before and after i s-off'ed it does say locked and when i trie to flash JuopunutBear hboot it says
sending 'zip' (381 KB)... OKAY
writing 'zip'... INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
FAILED (remote: 42 custom id check fail)
every time i sent the CID request email i dont know if it will help or not can you HELP ME PLEASE THAX

---

try the 1.49 hboot
http://forum.xda-developers.com/showthread.php?t=1906172
this one shouldnt give you the cid error

---

EM|NEM said:
try the 1.49 hboot
http://forum.xda-developers.com/showthread.php?t=1906172
this one shouldnt give you the cid error
Click to expand...
Click to collapse
thanx dude somuch help i downgraded the hboot form 1.53.0007 to 1.49.0007 my boot loader is unlocked and s-off and rooted
and i just want to know if i shed or shed not insall the JuopunutBear hboot
and my sdcard is not working i just want to know if i can save it or not it stoped working when i did the JuopunutBeard
BUT THANX MY PHONE WORKS AT LEAST.

---

Interesting this thing even happened. I had no problems with the exact same procedure. But now that problem is solved congrats.
About the sdcard problem. Do you have a microsd adapter to hook up with your pc? If you have you can try to recover it. If using windows: find command prompt from start menu, right click run as administrator.
Write in cmd prompt:
Diskpart
List disk
Select disk X where X is the number of your sdcard from the list, normally disk 0 is your hdd and 1, 2, ... are the numbers for your thumb drives
and memcards
Clean
Create partition primary
Select partition 1
Active
Format fs=fat32
Assign
Exit
This will format your sdcard
You may also format your sdcard from my computer but cmd makes you feel like a boss

---

You dont really need JuopunutBear hboot this one doesnt have any problems.
As for the card, do you have a card reader? try plugging it in to the pc and recovering files. you might need to use a software for that. after that just format it and reinsert in phone. This might or might nor work. some cards get smoked beyond recovery but chances are big that you can recover the card atleast (if not the data)

---

Yes, i recommend recuva for windows to recover any files you lost. If you dont have a card reader follow the instructions from there: http://unlimited.io/jbtroubleshooting.htm
[Edit]
Oh well, here:
Install busybox
adb shell busybox fdisk /dev/block/mmcblk1
type o
type w
adb shell busybox fdisk /dev/block/mmcblk1
type n
select primary, then 1
choose default sizes
type w
adb shell busybox mkfs.vfat /dev/block/mmcblk1p1
Your done!
Edit: I think this can also be done from terminal emulator. Just download a terminal emu from play store.

---

MrJyrks said:
Yes, i recommend recuva for windows to recover any files you lost. If you dont have a card reader follow the instructions from there:
[Edit]
Oh well, here:
Install busybox
adb shell busybox fdisk /dev/block/mmcblk1
type o
type w
adb shell busybox fdisk /dev/block/mmcblk1
type n
select primary, then 1
choose default sizes
type w
adb shell busybox mkfs.vfat /dev/block/mmcblk1p1
Your done!
Edit: I think this can also be done from terminal emulator. Just download a terminal emu from play store.
Click to expand...
Click to collapse
Thax guys I do have a microSDcard adapter I will triy it and thanx for the help it Reilly helped.