My Touchpad won't start any OS either android or WebOs. I already tried running webOs doctor a few different times but i haven't been abl to get past 8%.
I found here a link that said that the problem is a corrupted USB drive but I have tried running the novacom commands it has on the page but nothing seems to be working.Can anyone offer any help???
DrTyDoZn said:
My Touchpad won't start any OS either android or WebOs. I already tried running webOs doctor a few different times but i haven't been abl to get past 8%.
I found here a link that said that the problem is a corrupted USB drive but I have tried running the novacom commands it has on the page but nothing seems to be working.Can anyone offer any help???
Click to expand...
Click to collapse
Can you get NovaTerm to connect?
-SGA- said:
Can you get NovaTerm to connect?
Click to expand...
Click to collapse
I put that first command and it works and restarts my touchpad and it stays on the HP logo. I then type in novaterm and it says unrecognized command
DrTyDoZn said:
I put that first command and it works and restarts my touchpad and it stays on the HP logo. I then type in novaterm and it says unrecognized command
Click to expand...
Click to collapse
Connect it like you have been, then go into terminal and open novaterm, once open click file and connect
-SGA- said:
Connect it like you have been, then go into terminal and open novaterm, once open click file and connect
Click to expand...
Click to collapse
I don't understand how to open novaterm. Where can I find novaterm??
you can find it from this link http://forum.xda-developers.com/showthread.php?t=1426244
x000x said:
you can find it from this link http://forum.xda-developers.com/showthread.php?t=1426244
Click to expand...
Click to collapse
NOw i get a can't find Javaw file error
got novaterm to run, but now i get an unhandled exception error when i press any key in novaterm after connecting.
any help?
you need to install java
run novacom first. i think it might install it for you. its been a while so i dont really remember. if you are not sure if you have installed it previously, then try running a test to see if you have it http://www.java.com/en/download/testjava.jsp
x000x said:
you need to install java
Click to expand...
Click to collapse
GOt java installed. I just keep getting the unhandled exception error when i type in novaterm. I am able to run the command but i have to keep clicking ignore on the error message
That's really annoying isn't it! You should use the novaterm inside /program files/palm Inc/terminal/novaterm. It will give you less trouble... moreover if you copy and paste into it with right clicking, you don't need to type anything!
-SGA- said:
That's really annoying isn't it! You should use the novaterm inside /program files/palm Inc/terminal/novaterm. It will give you less trouble... moreover if you copy and paste into it with right clicking, you don't need to type anything!
Click to expand...
Click to collapse
THanks for all the help!!! I wish I had read this copy and paste thing yesterday! I finally got all the commands to go through on novaterm. I rused WebOs Doctor restored web os and then reinstalled android!! It's working great!!
often, i go to youtube and look for revkyle vids.
i was gonna suggest this until your last post..
but keep in mind when you wanna mod / upgrade your machine
Related
Wondering if someone knew this answer. I'm not new to adb but came across one issue i can't figure out. I have my adb set up for my o.g. Evo which is using Android SDK r6 which works fine. On Evo 3D i cant get passed "adb devices". All it says is list devices attached but it doesnt list which device like its not seeing it. I tried SDK r10 and r11 and nothing. I'm trying to push fre3vo.
tonyk__78 said:
Wondering if someone knew this answer. I'm not new to adb but came across one issue i can't figure out. I have my adb set up for my o.g. Evo which is using Android SDK r6 which works fine. On Evo 3D i cant get passed "adb devices". All it says is list devices attached but it doesnt list which device like its not seeing it. I tried SDK r10 and r11 and nothing. I'm trying to push fre3vo.
Click to expand...
Click to collapse
Do you have the drivers installed. Also, go to settings->Applications->Development and make sure USB debugging is selected.
I'm not sure selecting/deselecting USB debugging and/or Allow mock locations will make it work, but I remember having the same exact issue and I started playing with those and it worked. Maybe someone can confirm. Good luck.
It was the drivers. Who'd of thunk,lol Thank ya!
Sent from my PG86100 using XDA App
i need help also, I installed android sdk. put it on my c drive and ran cmd command c:\android-sdk\tools. says invalid. evo is in debugg. can u help
Uamore6 said:
i need help also, I installed android sdk. put it on my c drive and ran cmd command c:\android-sdk\tools. says invalid. evo is in debugg. can u help
Click to expand...
Click to collapse
I'm not home right now so I'm not sure but try going to /android-sdk/platform-tools instead of tools
Sent from the great mind of Young Sinema
For anyone else having problems getting ADB to run after checking the above mentioned solutions if you're still having trouble.....Make sure HTC Sync is not running on your computer. In fact, unless you use it to sync your phone with your computer, which most people do not. Just uninstall it. Once you have the drivers for your phone installed you don't need to keep Sync installed.
Still no luck.....I did uninstall HTC and tried everything......even uninstalled sdk and same thing I really need help.
I typed dir/w and got volume in c has no label. Volume serial # is eoree-14a9....couldthat b a problem....how fix......help at this all day yesterday......would like root or temp. Please help
come on guys help a girl in distress
Im new to this, yes I am a noob whatever that means. I have been working on this all of yesterday, and i am determine to get. my soon to b xbf don't want to help and says I will never get it.
Uamore6 said:
I typed dir/w and got volume in c has no label. Volume serial # is eoree-14a9....couldthat b a problem....how fix......help at this all day yesterday......would like root or temp. Please help
Click to expand...
Click to collapse
you are posting with forward slashes, are you on linux? if you are not, and are on windows then you need backslashes. anyways, go to your android folder, then the platform tools folder. you should see adb.exe if so, hold the shift key and click on an empty area in this folder. in the pop up there will be an option that say "open cmd prompt window here" click that, then in the cmd prompt window type "adb devices" without the quotes. does it list your device? if not, open device manager and see if there are any things shown with errors if so, right click and select update drivers. if this helped pm in accordance to your promise in the pron thread!
Uamore6 said:
i need help also, I installed android sdk. put it on my c drive and ran cmd command c:\android-sdk\tools. says invalid. evo is in debugg. can u help
Click to expand...
Click to collapse
After you bring up your command promt....You have to change directory to the sdk.
cd \android-sdk-windows\platform-tools (if the latest version)
or cd \android-sdk-windows\tools (if and older version)
Well to start don't have an Android folder....I don't think or c one. Also I do c the file in sdk folder but can't do anything u said to do....I'm on windows 7.and yes a promise is a promise.
i got c:\android-sdk\tools>.....after doing what u said is that good?
Uamore6 said:
Well to start don't have an Android folder....I don't think or c one. Also I do c the file in sdk folder but can't do anything u said to do....I'm on windows 7.and yes a promise is a promise.
Click to expand...
Click to collapse
If you installed the sdk to the root of your hard drive (c) and you go to my computer....you should see a folder called "android-sdk-windows". If you have that, then it's installed and in the right place. You just need to change directories to it once you open your command prompt.
Uamore6 said:
i got c:\android-sdk\tools>.....after doing what u said is that good?
Click to expand...
Click to collapse
Yes. Now with your phone plugged in & charge only selected, type:
adb devices
it says daemon started successfully list of devices successfully ht16ahx05283 device
Uamore6 said:
it says daemon started successfully list of devices successfully ht16ahx05283 device
Click to expand...
Click to collapse
Congratulations you now have adb set up.
okay......let me finish temp root and I will live up to my end of the deal.......lol send mail at gmail.....no pm setup yet...will respond
Uamore6 said:
okay......let me finish temp root and I will live up to my end of the deal.......lol send mail at gmail.....no pm setup yet...will respond
Click to expand...
Click to collapse
Sent you a pm......Should've gone through, because there's nothing to set up for it to work.
hockeyfamily737 said:
Sent you a pm......Should've gone through, because there's nothing to set up for it to work.
Click to expand...
Click to collapse
and was the deal up held i wonder(yes i was in that thread too)???? bump bump buummmpp
I just did the acmeuninstall in prep for ics but when back in webos i cannot enter usb mode... in my computer it shows as a drive but with 0bytes unabke to create any files / folders...
what went wrong?
webos doctor the only answer?
WebOS doctor fails too...
Gets to about 83% then says the phone has been disconnected?
Starting to wish I just left CM7 on...
Can anybody help please
i found this tut that might help you out it sounds like it might be the same issue
http://forums.webosnation.com/webos-internals/295881-webos-doctor-12-issue-fixed.html
hope its ok to post the link
thanks
To get the Doctor to finish, first try rebooting both your TP and PC and connect again. Also try a different usb port.
If the Doctor is still failing, then in WebOS go into Device Info -> Reset Options -> Full Wipe. After Full Wipe, try WebOS Dr. again. If it still fails, then the SD partition will need some more work from the WebOS command line interface. If you Google WebOS Doctor fails at xx%, you will get a good amount of hits.
Hopefully, because it's failing at a high % of completion, you won't have to go the command line route. Good luck!
Mike T
OK - I managed to get WebOS Doctor to work this morning... Left it on charge last night and it just worked first time today...
Now I cannot enter USB mode on the device in WebOS no pop-up appears... I tried the hardware enter USB mode by holding power and vol down while in WebOS... Still it does not work...
I need to create the folder cminstall and put the files in for ICS install...
Anyone got any ideas what's wrong with the device? How to enter USB mode for file transfer?
I've FULL WIPED in WebOS, WebOS Doctored it twice today but still cannot enter USB mode...
Please Help!
I think I found the route cause of my issues... The cable!
Now using the official cable and can get into usb mode every time....
But here's the kicker... The script in cmd come up with an error..
The system cannot find the file specified?
I'm typing novacom boot mem:// <ACMEinstaller
Also tried it like novacom boot mem:// < ACMEinstaller
What is the issue? The files are in both root of touchpad in cminstall folder and also Palm, Inc in program files...
Never had half as many issues with CN7 as I am with this...
Can some one please help??
If you are installing cm9 you need acmeinstaller2
With Classicnerd ICS you ACMEInstall moboot&CWM then flash rom&gapps from Recovery
I'm trying to install the buttah rom which states to use acmeinstaller 1 in the docs?
JayGB2011 said:
I'm trying to install the buttah rom which states to use acmeinstaller 1 in the docs?
Click to expand...
Click to collapse
YES but just acmeinstall moboot & CWM
colin_404 said:
YES but just acmeinstall moboot & CWM
Click to expand...
Click to collapse
That's exactly what I have in the cminstall folder...
acmeinstaller and moboot...
strange? keeps saying that file / folder not recognised?
JayGB2011 said:
I think I found the route cause of my issues... The cable!
Now using the official cable and can get into usb mode every time....
But here's the kicker... The script in cmd come up with an error..
The system cannot find the file specified?
I'm typing novacom boot mem:// <ACMEinstaller
Also tried it like novacom boot mem:// < ACMEinstaller
What is the issue? The files are in both root of touchpad in cminstall folder and also Palm, Inc in program files...
Never had half as many issues with CN7 as I am with this...
Can some one please help??
Click to expand...
Click to collapse
Heres a thought is your folder named ACMEinstaller OR ACMEInstaller
neither.... its named cminstall as normal.
Thanks for your help though... I've wasted a day on this so far with no luck
sorry not your folder , your file in palm, inc
ACMEInstaller... I'll give it a go without the cap for installer
EDIT: still comes up The system cannot find the file specified
ok in cmd window have you navigated to palm, inc directory
IF not open palm, inc folder in program files
then hold shift and right click. from the list open command window then
novacom boot mem:// < ACMEInstaller
I'm in the right place and using the command above but this error doesn't seem to change?
in "cminstall" folder u should have "moboot" and "clockworkmod" recovery
In Palm, inc folder u should have "ACMEInstaller" file
Then when u run the command if u get that error the cmd window cant be linked to the "palm, inc" folder
If the TP wasnt found it would say "unable to find device"
colin_404 said:
in "cminstall" folder u should have "moboot" and "clockworkmod" recovery
In Palm, inc folder u should have "ACMEInstaller" file
Then when u run the command if u get that error the cmd window cant be linked to the "palm, inc" folder
If the TP wasnt found it would say "unable to find device"
Click to expand...
Click to collapse
What he said, it's very important to be in the same folder as ACMEInstaller when you run the command.
Hi everyone,
So my TP is getting picked up sometime in the next 7 days for repairs (cracks and all) and I need to remove android. Couldn't find the novacom drivers online, and universal installer isn't working atm, so I got the SDK and now Device Manager (Windows 7) shows it as Palm Novacom (bootie). [Also, just noticed there is another "Unknown device" as well as the "Palm Novacom bootie" ?!?]
The problem is that when I tried to run the "novacom boot mem:// < ACMEUninstaller" command, nothing happens. I tried redownloading ACME, but still the same error. Anyone know what's up or how I can fix this.
Thanks in advance!
vladwt said:
Hi everyone,
So my TP is getting picked up sometime in the next 7 days for repairs (cracks and all) and I need to remove android. Couldn't find the novacom drivers online, and universal installer isn't working atm, so I got the SDK and now Device Manager (Windows 7) shows it as Palm Novacom (bootie). [Also, just noticed there is another "Unknown device" as well as the "Palm Novacom bootie" ?!?]
The problem is that when I tried to run the "novacom boot mem:// < ACMEUninstaller" command, nothing happens. I tried redownloading ACME, but still the same error. Anyone know what's up or how I can fix this.
Thanks in advance!
Click to expand...
Click to collapse
where did you put the acmeunistaller file?
colin_404 said:
where did you put the acmeunistaller file?
Click to expand...
Click to collapse
C:\Program Files\Palm, Inc\ACMEUninstaller
I tried running "novacom" on its own, but still nothing, it just creates a new row and accepts no input afterwards. The TP itself just stays in USB mode even after 10 mins or so...
vladwt said:
C:\Program Files\Palm, Inc\ACMEUninstaller
I tried running "novacom" on its own, but still nothing, it just creates a new row and accepts no input afterwards. The TP itself just stays in USB mode even after 10 mins or so...
Click to expand...
Click to collapse
So is the Touchpad in usb mode or recovery mode?
If u have a command window open inthe Palm, Inc directory where novacom application is and u type "novacom" u should at least
see a list of commands.
If not then u arent in the right place.
colin_404 said:
So is the Touchpad in usb mode or recovery mode?
Click to expand...
Click to collapse
It's in Recovery Mode (with the USB sign on the black screen); sorry that's what I meant. I'm thinking it could be a problem with the drivers, but Windows recognises it
Never used the sdk but if its like android then the novacom application will be in a folder in the sdk.
so u will have to run the acmeuninstaller fron a window in that folder.
colin_404 said:
Never used the sdk but if its like android then the novacom application will be in a folder in the sdk.
so u will have to run the acmeuninstaller fron a window in that folder.
Click to expand...
Click to collapse
Thanks for the suggestion, but it didn't work
Same result as before... even if I run "novacom.exe" from the sdk folder, it just shows a black cmd screen
Is there any other way to wipe it?
Have you tried following the instructions in THIS THREAD ? It talks about how to completely remove everything and put the TP back to factory 3.0.0 settings.
Nope, but thanks for the link. Unfortunately the novaterm link is down and the Universal Novacom Installer always gets stuck on initialising
Edit: I'm trying to get novacom from the webOS download and novaterm from the palm folder... see how that goes I'll post back once I've tried. Thanks again for all the help.
or uninstall the sdk, delete the Palm, Inc folder.
Download any Webosdoctor from webos internals site.
Run the novacom universal installer, choose "select file", choose the webosdoctor download.
The Palm, Inc folder will be created from it and drivers installed.
If you have any copy off Webos doctor on your computer and have Java installed download Universalnovscominstaller and when or if you have it right click on the file then go down to open with and select Java(TM) Platform, the novacom installer will pop up click on install then click on select file then navigate to wherever you have Webos doctor ie desktop etc select it and hey presto the novacom drivers will be installed.
P.S do not download Webos doctor with windows explorer as for some reason it appears to mess it up , use chrome.
Done and done!
Finally managed to get it done, after trying to do it on 2 Win7 PCs, went to an old XP laptop and tried on there.
If anyone gets stuck on this and finds this thread:
I used Universal Novacom Installer and installed Novacom from webOS Doctor 3.0.5, on an XP system. After that put ACMEUninstaller in Palm, Inc folder and ran the "novacom boot....." command and Android was gone! :victory: :crying:
Thank you all for the help, I'm so relieved after slaving away at this for over a day
vladwt said:
Finally managed to get it done, after trying to do it on 2 Win7 PCs, went to an old XP laptop and tried on there.
If anyone gets stuck on this and finds this thread:
I used Universal Novacom Installer and installed Novacom from webOS Doctor 3.0.5, on an XP system. After that put ACMEUninstaller in Palm, Inc folder and ran the "novacom boot....." command and Android was gone! :victory: :crying:
Thank you all for the help, I'm so relieved after slaving away at this for over a day
Click to expand...
Click to collapse
Happy you finally got there and thanks for clicking on the thank you box the solution I posted has been given by others so credit to everyone the bit that took me a long time was to click on open with and the fact that for what ever reason windows explorer messes up the download
hence the reason for my post.
All the best.
Just had my TP collected today by UPS. Let's hope when I get it back and try to put android again I won't have to go through this hell again
you can also change the compatibility settings for the app youre trying to run if its not working correctly in windows 7.
Hi, I am trying to install android on my TP, however Novacom wont install. Its stuck at the installing screen. I've tried another laptop same problem, occurs. Any fix around this?
Thanks.
FML, reformatted my TP by D.L WebOsdoctor.
KidTech said:
Hi, I am trying to install android on my TP, however Novacom wont install. Its stuck at the installing screen. I've tried another laptop same problem, occurs. Any fix around this?
Thanks.
Click to expand...
Click to collapse
If you have any copy off Webos doctor on your computer and have Java installed download Universalnovscominstaller and when or if you have it right click on the file then go down to open with and select Java(TM) Platform, the novacom installer will pop up click on install then click on select file then navigate to wherever you have Webos doctor ie desktop etc select it and hey presto the novacom drivers will be installed.
KidTech said:
Hi, I am trying to install android on my TP, however Novacom wont install. Its stuck at the installing screen. I've tried another laptop same problem, occurs. Any fix around this?
Thanks.
Click to expand...
Click to collapse
Don't know if you got this working or not but I was experiencing the same issue running Windows 7 64 bit, every time I tried to install is would stick on the installing screen. I ended up have to install using the NovacomInstaller_x64.msi to install and it worked with no problems. There is also a NovacomInstaller_x86.msi for 32 bit systems. I did a quick google search to find the file.
Like me I'm sure many of you were very surprised to log in today, as most have been doing everyday for the past month or so to find that not one, but two methods for obtaining s-off on the DNA were released within minutes of each other. First Revone and then, coincidentally enough, Moonshine was released minutes later. Somebody didn't want somebody else stealing their thunder I'm guessing. I'm just kidding...I'm sure both sides worked extremely hard on their respective methods and deserve mad props for the time spent on this and for waving a middle finger in the face of Verizon. Having said that I have tried both methods and have been unsuccessful so far at each one. I have to pose my questions here because I'm a new member and the development threads are off limits to me.
I tried the Revone Method first and like many were saying in the actual thread, my phone kept auto rebooting after the ./revone.dna -P step. I tried everything I could think of including all of the suggestions from the other users who finally got it to work by trying different things. Has anyone figured out what is causing the auto reboot? There has to be something specific causing this. One thing I have noticed with my phone is that USB Debugging has been very unreliable as of late. It turns itself off and on at random times and a lot of times the box is checked to enable it but it's not on. I don't know if this is playing a role in the process not working for me. I got the "success" message after every step several times but never actually achieved s-off.
I finally gave up on Revone to try Moonshine. I really didn't want to have to fo this route since I don't know a thing about Linux. I decided to go the boot from flash drive route so I downloaded 32 bit Ubuntu 13.04 iso and used universal USB installer to put it on my drive. I am using an external hard drive that is already formatted to fat32. I did NOT format the drive because I didn't think I had to since it was already fat32. Universal USB Installer was successful in putting Ubuntu on the external drive. I then went into my bios and changed the boot sequence to boot from the external drive first but when I rebooted it just loaded up Windows like normal. What am I doing wrong here? I'm running Windows 7 64bit but it was my understanding that this should not be a problem. Do I have to format and/or partition the external hard drive even though it is already fat32 before putting Ubuntu on it?
I'm dying to get one of these methods working but I'm currently stuck. Any newbies like me that can't post in the Development forums have any ideas as to what is going wrong here or would anyone else like to chime in with their own issues? Thanks in advance. I'm sure I'll get there eventually. :good:
Follow this guide for using an external USB device.
Modify the boot sequence like you were doing before, hopefully you'll get in to Ubuntu.
You say you don't have Linux experience, so I'll simplify the process for you:
Once at the desktop, press Control + Shift + T. This will open the Terminal, which is basically the Linux version of Windows' cmd.exe. Once inside, open up Mozilla Firefox (included) by using the side bar, the icon should be there. Download the version of Moonshine for the DNA, and then switch back to the terminal.
Type in these commands:
cd /home/Downloads
tar -zxf moonshine_dlx_2.06.605.1.tgz
sudo ./distiller
Click to expand...
Click to collapse
And then let Moonshine do its thing.
Modify the boot sequence like you were doing before said:
Thank you for the response. I saw in the instructions it says to put the moonshine file in the ~Downloads directory. How do I do that? Also, I think I am going to try the disc method instead. Does it matter if its a cd or dvd? And I never did ask if the version of Ubuntu I had downloaded was compatible with this method. I downloaded Ubuntu 13.04 32bit for use on Windows 7 64bit. Will I have any problems? Thanks again!!
Click to expand...
Click to collapse
Oh and one other thing I forgot to mention regarding the revone method...the directory \data\local\temp did not exist on my device prior to me creating it when I pushed the revone.dna to my phone. Should I have had that directory on my phone already?
Sent from my HTC6435LVW using xda premium
I am in a similar boat. I am trying to use revone as I can't get ahold of linux. I downloaded the sdk and revone, moved adb to my C: with the revone file. Everything goes smoothly until i reach the -P step. Every single time it reboots after saying success. If I try to run the -s 0 -u command after that I get failed to map memory, success, revone failed = -1. If I try the -P command again, I get the same message with error code 2. If I try to reboot the bootloader, I get error device not found. I've been at this for hours, and Jerry from Android central even walked me through it, everything ended up successful ans when the bootloader rebooted, it was still locked and s on. Help please?
I dont even know what command to type into CMD for Revone. how do i push the file I have revone on my desktop downloaded and SDK installed..
Next step is?
Gorilla* said:
I dont even know what command to type into CMD for Revone. how do i push the file I have revone on my desktop downloaded and SDK installed..
Next step is?
Click to expand...
Click to collapse
I moved adb and its two counterparts in a folder named ADB_WIN, in my C: drive. From there, I typed cmd.exe in the search bar, it opened the command box. I typed in adb push revone.dna /data/local/tmp/ ENTER adb shell ENTER cd /data/local/tmp ENTER chmod 755 revone.dna ENTER ./revone.dna -P and that's where my error started coming in. You can try this, not sure if this right, but if its not, hopefully someone will correct me.
Krispenwah said:
Thank you for the response. I saw in the instructions it says to put the moonshine file in the ~Downloads directory. How do I do that? Also, I think I am going to try the disc method instead. Does it matter if its a cd or dvd? And I never did ask if the version of Ubuntu I had downloaded was compatible with this method. I downloaded Ubuntu 13.04 32bit for use on Windows 7 64bit. Will I have any problems? Thanks again!!
Click to expand...
Click to collapse
32 bit should work fine. You need a DVD because a CD is too small. ~/Downloads directory is just the current user's downloads folder. So most likely it would get downloaded to there anyway.
Sent from my DNA using Tapatalk 2
"1. Download revone (above) and push it to your device: adb push revone.dna /data/local/tmp/"
How is this done? I have no idea how to push to the DNA. Anybody help? Thanks
michaelrager said:
"1. Download revone (above) and push it to your device: adb push revone.dna /data/local/tmp/"
How is this done? I have no idea how to push to the DNA. Anybody help? Thanks
Click to expand...
Click to collapse
That's the command you use, adb push. Use it in a terminal. So..assuming windows use explorer to go yo where you downloaded the files and have revone.dna then hold shift and right click, choose open prompt here then type
adb push revone.dna /data/local/tmp
If it complains about command not found for adb add the adb.exe and its libraries to the same folder then try again.
Tapatalked from my HTC DNA - Carbon
pio_masaki said:
That's the command you use, adb push. Use it in a terminal. So..assuming windows use explorer to go yo where you downloaded the files and have revone.dna then hold shift and right click, choose open prompt here then type
adb push revone.dna /data/local/tmp
If it complains about command not found for adb add the adb.exe and its libraries to the same folder then try again.
Tapatalked from my HTC DNA - Carbon
Click to expand...
Click to collapse
Thanks for the quick response. I don't have that option when i shift and right click, I only have "open with" Any Ideas?
michaelrager said:
Thanks for the quick response. I don't have that option when i shift and right click, I only have "open with" Any Ideas?
Click to expand...
Click to collapse
Hold shift while you right click, can't be on a file, just someplace in the explorer, no folders, etc clicked on, someplace blank.
Tapatalked from my HTC DNA - Carbon
pio_masaki said:
Hold shift while you right click, can't be on a file, just someplace in the explorer, no folders, etc clicked on, someplace blank.
Tapatalked from my HTC DNA - Carbon
Click to expand...
Click to collapse
Got it. I misunderstood what you meant thanks! However, I am getting that error.
I got the error 'adb' is not recognized as an internal or external command, operable program or batch file. Can you elaborate on what to fix? Thanks Again!
michaelrager said:
Got it. I misunderstood what you meant thanks! However, I am getting that error.
I got the error 'adb' is not recognized as an internal or external command, operable program or batch file. Can you elaborate on what to fix? Thanks Again!
Click to expand...
Click to collapse
add adb.exe to your command, instead of just adb
Gorilla* said:
add adb.exe to your command, instead of just adb
Click to expand...
Click to collapse
Thanks, but the same type of error came up.
michaelrager said:
Thanks, but the same type of error came up.
Click to expand...
Click to collapse
Put revone.dna in the same folder that has fastboot and adb then try
Sent from my HTC6435LVW using xda premium
Krispenwah said:
Put revone.dna in the same folder that has fastboot and adb then try
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
That worked I got daemon started successfully. Then it says error: device not found
I am in debugging mode.
Any help is much obliged. Thanks!
michaelrager said:
That worked I got daemon started successfully. Then it says error: device not found
I am in debugging mode.
Any help is much obliged. Thanks!
Click to expand...
Click to collapse
Try 'adb devices' and see if it recognizes your phone. Do you have usb debugging enabled? If so toggle it off and then back on while the phone is plugged in then wait about 10-15 seconds and try 'adb devices' again to see if its recognized now
Krispenwah said:
Try 'adb devices' and see if it recognizes your phone. Do you have usb debugging enabled? If so toggle it off and then back on while the phone is plugged in then wait about 10-15 seconds and try 'adb devices' again to see if its recognized now
Click to expand...
Click to collapse
Got it!
* daemon started successfully *
3372 KB/s (645920 bytes in 0.187s)
Is it all set so I can move on to the next step?
michaelrager said:
Got it!
* daemon started successfully *
3372 KB/s (645920 bytes in 0.187s)
Is it all set so I can move on to the next step?
Click to expand...
Click to collapse
Yeah looks like the file pushed successfully. Now u do "adb shell" then "cd data/local/tmp" then "chmod 755 revone.dna" ....and so forth. Make sure ur adding the extension ".dna" to revone (revone.dna) each time u type it. If u just put revone it won't work ull just get an error