Related
As per the title, device manager doesn't change when I plug the phone in, tried two different computers and two different cables, flashed the stock firmware back, and still nothing.
It charges when I plug it in and SOMETIMES brings up the MTP-Initialization logo thing, but never gets any further.
Is my GS2 goosed yet again?
Edit: Tried on my PS3 as well and still charges, but won't ask to mount the SD card or anything, so I'm back to my trusty HTC HD2, wondering whether I should sell the GS2 once it's repaired and get a Galaxy Nexus...
Hah, another HD2 veteran, it's like everyone from the HD2 forum is now here... even the devs. Anyway, may be a stupid question, but are you always trying with the same USB cable?
Disable usb debug mode
Sent from my GT-I9100 using xda premium
Tried two different cables as stated in my OP, and it doesn't matter whether USB Debugging is on or off. I'm taking it back to the service centre after work today, and I'm probably going to sell it after.
I've had the camera go.
I've had it not vibrating at all.
I've had problems with spots on the camera lens.
I think I'm going to put some money to the sale of it, and get a Galaxy Nexus, hopefully the built quality will be at least a little better...
Solution is in the phone
Dear All
Following are my observations and possible steps to
1. When the phone is upgraded to Android 2.3.4 and above (mine is 2.3.6) Kies stops recognizing the phones and USB connection / Serial port connections etc get reset on the phone
2. Even if proper drivers are there on the laptop (mine is Windows 7 64bit) they are not recognized
3. Device Manager shows "unknown device"
4. Updating the driver also does not result in any help
5. solution lies in the phone
a. key in the dialer *#7284#
b. it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
c. For USB. select the PDA.if it already selected to PDA. reselect it by select MODEM and then PDA again.. Only change the USB setting.. andthen press back. try reconnect (thanks to napi1 @ androidforums.com/samsung-galaxy-s2-international/447145-sgs2-kies-not-syncing-os-2-3-5-a.html#post3484588)
6. The Laptop will start recognizing the required drivers and install them
also
Phone is not recognized by laptop when it is in USB debug mode, MyPhoneExplorer does not recognize when it is not in Debug mode
Hope this helps
My setup
Samsung Galaxy S2 GTI9100G (not rooted)
Android 2.3.6 (upgraded on Dec 8th from Samsung link in the phone)
Windows 7 64 Bit
Dear All
Following are my observations and possible steps to
1. When the phone is upgraded to Android 2.3.4 and above (mine is 2.3.6) Kies stops recognizing the phones and USB connection / Serial port connections etc get reset on the phone
2. Even if proper drivers are there on the laptop (mine is Windows 7 64bit) they are not recognized
3. Device Manager shows "unknown device"
4. Updating the driver also does not result in any help
5. solution lies in the phone
a. key in the dialer *#7284#
b. it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
c. For USB. select the PDA.if it already selected to PDA. reselect it by select MODEM and then PDA again.. Only change the USB setting.. andthen press back. try reconnect (thanks to napi1 @ androidforums.com/samsung-galaxy-s2-international/447145-sgs2-kies-not-syncing-os-2-3-5-a.html#post3484588)
6. The Laptop will start recognizing the required drivers and install them
also
Phone is not recognized by laptop when it is in USB debug mode, MyPhoneExplorer does not recognize when it is not in Debug mode
Hope this helps
My setup
Samsung Galaxy S2 GTI9100G (not rooted)
Android 2.3.6 (upgraded on Dec 8th from Samsung link in the phone)
Windows 7 32 Bit
Thank you !!!
Unbelievable! Thank you soo Much!
Helps also on Mac 10.6.8
Thanks a lot mate..I was afraid that i'll have to take it to service center. This helped me.
thanks people!...even i had upgraded to 2.3.6 and usb mode just wouldnt work....
this solved that problem though..
Fantastic tip!
It worked! Now my S2 can be detected by the PC.
Thanks a million!
Doing a factory reset after backing up data will solve the problems.
Still Hasn't worked for me. I'm getting no USB function other than Charge. Its working as if the USB isn't plugged in at all.
Is there anyway of reinstalling the MTP application on the phone? When i find it through App manager its showing with no size and no options inside (clear data or clear cache)
Kies isn't working as far as the phone is concerned there is no USB connection at all.
I know ICS is coming within a few days for GS2 owners, will this clear the problem???
So frustrating.
Thanks in advance if anybody can help
SG2-Nick said:
Still Hasn't worked for me. I'm getting no USB function other than Charge. Its working as if the USB isn't plugged in at all.
Is there anyway of reinstalling the MTP application on the phone? When i find it through App manager its showing with no size and no options inside (clear data or clear cache)
Kies isn't working as far as the phone is concerned there is no USB connection at all.
I know ICS is coming within a few days for GS2 owners, will this clear the problem???
So frustrating.
Thanks in advance if anybody can help
Click to expand...
Click to collapse
same with mine. mine still doesnt work with the dialer *#7284# and with debugging off or on. ive unistalled and reinstalled the driver serveral times and nothing and this has happened to me on my hero and my sgs2 dozens of times, its so annoying =[. at one point i manged to get all but the usb storage drivers installed. what else can i do ???
Same problem
Same problem here, tried everything (to my knowledge). Someone told me it had to do with the battery overheating because I had use the charger from another phone. For about 2 days my phone would go on vibrate randomly and started the connection process (like a usb cable was connected). It could do that non stop for a few hours. Now that Im back to my original charger, it stoped, but still can't connect to my pc.
I tried on 3 diff PCs with diff version of windows...
I've tried everythin, debug mode on/off, reinstalled Kies, drivers, did factory reset, but nothing.. when i try to connect my SGSII to Kies, it writes "Current connection mode not supported by Kies".. I'm on Lite'ning rom v2.2..
If you're running a custom rom, why would you want to use Kies ? It's awful. There are so many other apps that have the same functionality as Kies (tho granted not one app that does everything Kies does) that work perfectly with custom roms.
Only reason to use Kies would be if you went back to stock because you wanted official ICS OTA or similar IMHO.
I did a backup with Kies, now my all contacts, sms, videos, music, calendar are in this f***in' backup file.. :| I have an awfull headache Or i can do a restore with another app, will it be compatible with Kies's backup file?
same problem. USB connection to PC will only charge. Recently updated to 2.3.6.
Tricky one.
----------EDIT---------
it worked ok after rebooting my PC. Must just be general crapiness.
Ashtwinks said:
Dear All
Following are my observations and possible steps to
1. When the phone is upgraded to Android 2.3.4 and above (mine is 2.3.6) Kies stops recognizing the phones and USB connection / Serial port connections etc get reset on the phone
2. Even if proper drivers are there on the laptop (mine is Windows 7 64bit) they are not recognized
3. Device Manager shows "unknown device"
4. Updating the driver also does not result in any help
5. solution lies in the phone
a. key in the dialer *#7284#
b. it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
c. For USB. select the PDA.if it already selected to PDA. reselect it by select MODEM and then PDA again.. Only change the USB setting.. andthen press back. try reconnect (thanks to napi1 @ androidforums.com/samsung-galaxy-s2-international/447145-sgs2-kies-not-syncing-os-2-3-5-a.html#post3484588)
6. The Laptop will start recognizing the required drivers and install them
also
Phone is not recognized by laptop when it is in USB debug mode, MyPhoneExplorer does not recognize when it is not in Debug mode
Hope this helps
My setup
Samsung Galaxy S2 GTI9100G (not rooted)
Android 2.3.6 (upgraded on Dec 8th from Samsung link in the phone)
Windows 7 64 Bit
Click to expand...
Click to collapse
Won't work on my samsung galaxy s2 (ICS 4.0.3) - windows Xp (sweet)
I have a problem with connection my wife's ACE with ODIN / PC. I'll write you a few facts to help you in helping me.
I've flashed phone and rooted (odin detect it and I could also connect to the computer as mass storage).
Even after uploading the new firmware, I could copy some files to the phone.
And here is the biggest problem ... I do not know what happened but something started to go bad (crash with applications, root disappeared, there was an old version of the firmware - I have no idea as possible ... the phone uses the wife and children ).
I tried to clear the cash and fix permission - and in this operation, the phone has crashed.
I decided to flash it again.
I did all the cleaning and format factory.
And that was the end of my adventure - because when I want flashign, odin does not detect the phone. Phone is not not detected as a computer disk.
After a long time of connection by usb cable, Windows pop me up by standard error "encountered a problem installing your hardware ..." "one of the USB devices connected to the computer improvement may not work ...".
Checked on a desktop and laptop.
On both of these computers my other phone (SGS) works correctly and is detected - using the same cable (so cable and ports and drivers are ok).
Could you help me please?
Kies should install the drivers when you plug it in. But during flashing, you need to close kies.
It's not the issue. Drivers are work correctly because other phone is detected. Kies is close.
azdanowski said:
I have a problem with connection my wife's ACE with ODIN / PC. I'll write you a few facts to help you in helping me.
I've flashed phone and rooted (odin detect it and I could also connect to the computer as mass storage).
Even after uploading the new firmware, I could copy some files to the phone.
And here is the biggest problem ... I do not know what happened but something started to go bad (crash with applications, root disappeared, there was an old version of the firmware - I have no idea as possible ... the phone uses the wife and children ).
I tried to clear the cash and fix permission - and in this operation, the phone has crashed.
I decided to flash it again.
I did all the cleaning and format factory.
And that was the end of my adventure - because when I want flashign, odin does not detect the phone. Phone is not not detected as a computer disk.
After a long time of connection by usb cable, Windows pop me up by standard error "encountered a problem installing your hardware ..." "one of the USB devices connected to the computer improvement may not work ...".
Checked on a desktop and laptop.
On both of these computers my other phone (SGS) works correctly and is detected - using the same cable (so cable and ports and drivers are ok).
Could you help me please?
Click to expand...
Click to collapse
The problem started with 2 & 5 .
You probably flashed a new stock firmware , which caused root functionality to disappear .
In number 4 , fix permissions should only be used if a few system apps keeps force closing
In number 6 , factory reset isn't needed unless absolutely necessary
I'd recommend you to go to www.sammobile.com and download the firmware that you were using
Then flash it with ODIN
Emo,
but my only one problem is, that ODIN dosen't detect my ACE. So this is my main issue: what should I do, to reinstitiute a possibillity of detecting phone by odin / PC.
azdanowski said:
Emo,
but my only one problem is, that ODIN dosen't detect my ACE. So this is my main issue: what should I do, to reinstitiute a possibillity of detecting phone by odin / PC.
Click to expand...
Click to collapse
It should detect your phone
Try ending all Kies processes by using Task Manager
Sent from my GT-S5830 using XDA App
azdanowski said:
I have a problem with connection my wife's ACE with ODIN / PC. I'll write you a few facts to help you in helping me.
I've flashed phone and rooted (odin detect it and I could also connect to the computer as mass storage).
Even after uploading the new firmware, I could copy some files to the phone.
And here is the biggest problem ... I do not know what happened but something started to go bad (crash with applications, root disappeared, there was an old version of the firmware - I have no idea as possible ... the phone uses the wife and children ).
I tried to clear the cash and fix permission - and in this operation, the phone has crashed.
I decided to flash it again.
I did all the cleaning and format factory.
And that was the end of my adventure - because when I want flashign, odin does not detect the phone. Phone is not not detected as a computer disk.
After a long time of connection by usb cable, Windows pop me up by standard error "encountered a problem installing your hardware ..." "one of the USB devices connected to the computer improvement may not work ...".
Checked on a desktop and laptop.
On both of these computers my other phone (SGS) works correctly and is detected - using the same cable (so cable and ports and drivers are ok).
Could you help me please?
Click to expand...
Click to collapse
this is your problem. Uninstall your phone in Device Manager and install it properly by downloading the standalone USB driver for S5830. Google for it. This happened to me on Win XP. On Win 7, the native/vanilla USB drivers worked fine.
My galaxy tab 10.1 is on 3.2 honeycomb official. Its not rooted and its 3g version
My tab would not connect, i have searched for many forms, i could not find the solutions.I have done factory reset twice and have reinstalled kies twice also. My problem still persist. When i connect my tab to my laptop which is running on Windows 7. Three thing happens
1. Some time it will show mtp initializing and then it shows usb connected (mtp connected). No where is galaxy folder on my computer is found. When i go to devices and printer. No galaxy tab icon is shown.
2.Some times, galaxy tab charges only, there is no mtp instializing like 1 scenario etc
3. Nothing will happens.No mtp instializing or no charging
Lastly i have tried on my destop computer and another laptop but the problem still persist
Help would be appreciated.
I would backup my files and factory reset the tab. Should help.
i have done factory reset twice
Make sure debugging is unchecked.. What version of windows are you running?
I find that my tablet will not recognize on XP or Window 7 since I have owned it. (Google I/O bought in July of last year) Once I installed CM9 it would then be recognized through Macbook Pro Android transfer.. (something like that. I sold the Macbook awhile back) I resort to Dropbox.. Its a *****.. But I don't complain and I stream most of my files anyway...
ammad53 said:
My galaxy tab 10.1 is on 3.2 honeycomb official. Its not rooted and its 3g version
My tab would not connect, i have searched for many forms, i could not find the solutions.I have done factory reset twice and have reinstalled kies twice also. My problem still persist. When i connect my tab to my laptop which is running on Windows 7. Three thing happens
1. Some time it will show mtp initializing and then it shows usb connected (mtp connected). No where is galaxy folder on my computer is found. When i go to devices and printer. No galaxy tab icon is shown.
2.Some times, galaxy tab charges only, there is no mtp instializing like 1 scenario etc
3. Nothing will happens.No mtp instializing or no charging
Lastly i have tried on my destop computer and another laptop but the problem still persist
Help would be appreciated.
Click to expand...
Click to collapse
I often connect my tablet to my Win7 PC so I can copy TV shows from Media Center to the tablet. Sometimes the PC doesn't recognise the tablet unless I power down the tablet and turn it back on again. No idea why though.
follow this
download samsung 7510 usb drive, then download kies and last download windows media 11. if your xp its not original, follow some tutorial on youtube about how to install windows media player 11.
i has this issue with windows xp few days ago..
z31k said:
Make sure debugging is unchecked.. What version of windows are you running?
I find that my tablet will not recognize on XP or Window 7 since I have owned it. (Google I/O bought in July of last year) Once I installed CM9 it would then be recognized through Macbook Pro Android transfer.. (something like that. I sold the Macbook awhile back) I resort to Dropbox.. Its a *****.. But I don't complain and I stream most of my files anyway...
Click to expand...
Click to collapse
if you can't connect to a pc, then how were you able to install cm9?
mawells787 said:
if you can't connect to a pc, then how were you able to install cm9?
Click to expand...
Click to collapse
Actually you can. I don't know how he did it but if you want to know here's what I did.
Go here: http://forum.xda-developers.com/showthread.php?p=15693193.
You can root through an update.zip, flashed from the stock recovery (at least for the 3g version). After that install rom manager and flash cwm. Finally download cm9 or aokp or everything else you want and flash away!
Btw, I have no problem connecting to PC. I just did it that way.
Sent from my amazing 10.1 galaxy tab
PC recognizes the tablet but...
The pc recognizes my tablet, but even after it says safe to use, the tablet never shows up under my computer to transfer files. Any suggestions?
Dominus357 said:
The pc recognizes my tablet, but even after it says safe to use, the tablet never shows up under my computer to transfer files. Any suggestions?
Click to expand...
Click to collapse
Do you have MTP enabled under storage > USB computer connection?
Same Problem
ammad53 said:
My galaxy tab 10.1 is on 3.2 honeycomb official. Its not rooted and its 3g version
My tab would not connect, i have searched for many forms, i could not find the solutions.I have done factory reset twice and have reinstalled kies twice also. My problem still persist. When i connect my tab to my laptop which is running on Windows 7. Three thing happens
1. Some time it will show mtp initializing and then it shows usb connected (mtp connected). No where is galaxy folder on my computer is found. When i go to devices and printer. No galaxy tab icon is shown.
2.Some times, galaxy tab charges only, there is no mtp instializing like 1 scenario etc
3. Nothing will happens.No mtp instializing or no charging
Lastly i have tried on my destop computer and another laptop but the problem still persist
Help would be appreciated.
Click to expand...
Click to collapse
I bought a new Samsung Galaxy Tab GT-P7500 yesterday, unboxed it and when i connected it to my laptop for the first time, it showed this problem.. When i connect it to my laptop, it says MTP Initialization, with a message on my laptop "USB Device not recognised" & a 'X' on the battery of my tablet.
I have tried to reinstall the usb drivers & kies several times, but still i am having this problem.. i have bought a new one and not able to use it for 2 days now.. feeling very sad.... Please Help....!!
deepakgupta said:
I bought a new Samsung Galaxy Tab GT-P7500 yesterday, unboxed it and when i connected it to my laptop for the first time, it showed this problem.. When i connect it to my laptop, it says MTP Initialization, with a message on my laptop "USB Device not recognised" & a 'X' on the battery of my tablet.
I have tried to reinstall the usb drivers & kies several times, but still i am having this problem.. i have bought a new one and not able to use it for 2 days now.. feeling very sad.... Please Help....!!
Click to expand...
Click to collapse
XDA is no longer worth my time.
TimOster said:
Read the Kies information on Sammy's site. Make sure you have the settings as they tell you. You can make the tab act like this if USB Debugging is turned on for instance.
Click to expand...
Click to collapse
Thanks for your advice, but i have done everything right as descibed in manuals, but still i am unable to connect my tab to my laptop, as usb connection is the only way to connect, i am feeling very disturbed.... Please help......!!
Sent from my GT-P7500 using xda app-developers app
Problem with computer not seeing phone
deepakgupta said:
Thanks for your advice, but i have done everything right as descibed in manuals, but still i am unable to connect my tab to my laptop, as usb connection is the only way to connect, i am feeling very disturbed.... Please help......!!
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
I had problem with my phone not being seen by my computer, I tried almost everything I read on these forums,
and nothing work, uninstalled drivers, changed settings on my phone, still nothing, then at last I change the setting
by dialing *#7284# (phone utility) made sure UART was set to PDA, USB set to PDA then Qualcomm USB Settings set to MTP,
now my computer sees my phone, I hope this will help others, it worked on mine, I have a Sprint Galaxy Note 2 flashed to Page plus,
with the help of Viper32, I get 3g service, pic messaging etc....
Hi guys!
I have a rooted international Galaxy S3 (i9300) phone with a custom rom: UltimaRom (version 8.x), and using XXELLA kernel (?) and XXELLA Modem version.
Since a while, I'm trying to manage the files in it (phone memory or sd card) from my computer, simply by using an USB cable (the one given with the phone or even other cables, it doesn't matter) and the standard MTP protocol, which is used by Google since Android 3.0. And, whatever I try to do, Windows doesn't seem to notice anything. In my device manager, nothing appears. Nothing either in the "My Computer" window, it just doesn't "exist". No reaction at all from Windows. The Phone's charging, but this is all it is.
And I have the same problem using another computer (like my own laptop, or my brother's one). All computers are running Windows 8 x64 Pro.
I tried to install, re install, delete, etc. all the phone drivers I have on this computer, tried to install Samsung Kies, tried some "mounting" apps on the Play Store, nothing's working.
What should I do to make it work?
Thanks a lot!
Might be stating the obvious but is your phone set at usb debugging? I have the same issue from time to time but when I unplug and plug back it fixes itself.
Hope you get your stuff fixed soon.
Sent from my GT-I9300 using xda app-developers app
Thanks for your response.
Yes, USB Debugging is enabled.
Jiraiya-08 said:
Hi guys!
I have a rooted international Galaxy S3 (i9300) phone with a custom rom: UltimaRom (version 8.x), and using XXELLA kernel (?) and XXELLA Modem version.
Since a while, I'm trying to manage the files in it (phone memory or sd card) from my computer, simply by using an USB cable (the one given with the phone or even other cables, it doesn't matter) and the standard MTP protocol, which is used by Google since Android 3.0. And, whatever I try to do, Windows doesn't seem to notice anything. In my device manager, nothing appears. Nothing either in the "My Computer" window, it just doesn't "exist". No reaction at all from Windows. The Phone's charging, but this is all it is.
And I have the same problem using another computer (like my own laptop, or my brother's one). All computers are running Windows 8 x64 Pro.
I tried to install, re install, delete, etc. all the phone drivers I have on this computer, tried to install Samsung Kies, tried some "mounting" apps on the Play Store, nothing's working.
What should I do to make it work?
Thanks a lot!
Click to expand...
Click to collapse
That's odd.. I use Ultima ROM and have updated to 8.1.1. I just checked just to make sure (my last update was done OTA) and yeah, computer recognized phone right away.. heard a little computer sound and everything. I am also running Windows 8
The base changed in v8. If you haven't done a fac reset since then you should try that.
Ok I just tried to make a factory reset, nothing changes...
Oh, and if that can help: when the phone's booting, Windows says "Unrecognized device". When it's booted up, it disapears.
Anyone ?
Drivers...
I used these drivers.
It worked for me...
http://forum.xda-developers.com/showthread.php?t=1564104
Work for me too! THX
Thanks for your help !
Unfortunately it didn't work for me.... :/
Any other ideas ?
Sorry to keep rising this thread but this issue is really annoying... :/
Up
I still have the same problem. No other ideas please ?
? :/
Does Easy UMS work?
Can you connect via adb?
Does Odin recognize the phone?
If no to all of the above, try a different cable / port
Glebun said:
Does Easy UMS work?
Can you connect via adb?
Does Odin recognize the phone?
If no to all of the above, try a different cable / port
Click to expand...
Click to collapse
Thank you for your response !
- Easy UMS doesn't seem to work, even if the app doesn't show any error on the phone
- How do I connect via ADB ? I tried to connect the phone while it is in Download Mode, nothing appears on Windows or Odin
- As I said, in Download Mode, Odin doesn't seems to recognize anything...
And of course, I already tried to change the cable, the USB port, or even the computer i'm connecting the phone to...
Thanks again for your help
Starting to sound like a damaged micro USB port on the phone possibly, or a driver's problem
Oh, and there's a thing: when I reboot the phone, while the Samsung logo appears on the screen with the short jingle, the PC makes 3 or 4 times a sound like something has been plugged, and showes a "Unrecognized device" warning window. When the boot is finished, and the rom is loaded, everything just disappears and no sound is any longer made by the PC.
Also, please note that when I connect the phone to the PC (using the same PC, cable and USB port of course), the phone charges up just like before, without any problem.
have you tried the old drivers?
search Google for " Samsung USB drivers 1.4.6.0 "
disconnect your computer from the internet
Install the drivers.
don't reconnect to the internet.
connect your phone and let windows find the drivers
GTP7510MAYXAR wont connect to pc, usb not recognized. In odin mode it does the same. Pc doesnt have bluetooth either.
When inserting a usb female connector it does say usb connection, but the usb flash drives did not show. Tablet
also charges healthy.
I want to root this, install clockwork recovery, flash rom to jb 4.2.2, but without the help of that pc i am stuck on 4.04 stock.
Bought this from someone so no previous exp with this device.
Any way to root and install recovery with tablet alone itself?
Thank you for your time:laugh:
Maybe I'm underestimating your experience, but you can try this to see whether USB storage works:
Go to Settings -> Storage -> the 3-lined menu button at the top right corner -> USB PC connection -> Media device (MTP)
I wish this can help. if you have further questions we are here to help at any time.
Good luck!
arashtarafar said:
Maybe I'm underestimating your experience, but you can try this to see whether USB storage works:
Go to Settings -> Storage -> the 3-lined menu button at the top right corner -> USB PC connection -> Media device (MTP)
I wish this can help. if you have further questions we are here to help at any time.
Good luck!
Click to expand...
Click to collapse
Ofcourse i tried it hihi:highfive:
But i am starting to think its faulty hardware as no one has any idea about the issue
I actually bought mine in the exact same condition. It would not work on usb no matter what i did also a few other 'bugs' I thought it was a faulty cable but it turned out to be corrupted files on the rom.
Long story short, reatoring the tab to factory via ODIN fixed everything.
Follow this thread for help
http://forum.xda-developers.com/showthread.php?t=2142268
TheDoctah said:
I actually bought mine in the exact same condition. It would not work on usb no matter what i did also a few other 'bugs' I thought it was a faulty cable but it turned out to be corrupted files on the rom.
Long story short, reatoring the tab to factory via ODIN fixed everything.
Follow this thread for help
http://forum.xda-developers.com/showthread.php?t=2142268
Click to expand...
Click to collapse
:crying:
My tablet gets the same "not recognized" error in odin mode ;( when connecting it to pc. :crying:
Please someone help a fellow owner of the best tablet to make it even better, is there any way for me to install a custom rom without usb?
teun3sixty said:
Please someone help a fellow owner of the best tablet to make it even better, is there any way for me to install a custom rom without usb?
Click to expand...
Click to collapse
Well, you could use mobile ODIN or Rom Manager. However, you need to be able to pull the backup you're going to make before you install that custom rom off of the device. Using USB is a simple way of doing that. It's possible to get it off over WiFi, but you really should fix the USB.