K, I'm rooted, with hasoon's toolkit, have Titanium Backup, I can delete system apps, back them up,..., no problem.
BUT, installing BusyBox is a no go
edit -> still having problems reinstalling busybox - i wrote a script to flash it to the system/xbin folder through cwm, which works, but i can't make the permission for busybox to execute stick after a reboot - whenever i reboot, i have to manually set it to execute in root explorer or it's useless.
Can someone help me write a cwm script to flash busybox to /system/xbin through cwm and make it permanently executable ?
bumping this - need help - anyone ?
edit -> still having problems reinstalling busybox - i wrote a script to flash it to the system/xbin folder through cwm, which works, but i can't make the permission for busybox to execute stick after a reboot - whenever i reboot, i have to manually set it to execute in root explorer or it's useless.
Can someone help me write a cwm script to flash busybox to /system/xbin through cwm and make it permanently executable ?
give this a shot
http://forum.xda-developers.com/showthread.php?t=1772338
Related
Guys my phone took a nose dive. I flashed back to global 2.1 from Eternity 2.1. I rooted via superoneclick. Installed busybox so I can reinstall xrecovery. Now when I try to install busybox it is telling me I am rooted but will not install due not being nand unlocked or unable to remount. Please help fast.
Update: I tried rooting with z4 still unsuccessful. busybox is in system/bin so I do not know. First time I have ran into this type of problem. do not know if is on my end or busybox's
1. remove busybox
- use rootexpoler mount r/w in /system/bin/busybox delete it
- download busybox in market and install busybox
2. xRecovery
copy 3 file /sdcard/android/data/com.zoz33.xRecoveryInstall/Xrecovery.rar/system/bin/
- chargemon
- busybox
- xrecovery.tar
to /system/bin/ mount r/w and past 3 file in filder
thanks I figured out that it was a bad flash file I used. It wouldn't save the information I was putting into it.
My Razr Maxx installed the OTA ICS update today. There were no error messages. Everything seemed to run fine. And on top of that I thought that my root was preserved.
Well, I have an old version (3.0.3.2) of SuperUser intalled that I cannnot uninstall. I cannot mount /system/ as read-write using ADB. I can't mount /system/ as rw using Terminal Emulator on the phone. I tried the one-click script EternityProject EasyRootICS to install root and it seemed to work (no errors reported), but when I edited the batch file to get rid of all of the CLS (clear screen) commands, I was able to see that when it tried to write the new superuser app to /system/bin/ it's failing (with no error reporting).
So what do I do now?
The bottom line is that I need root, but I don't know how I can get root without getting rid of my old SuperUser installation first.
I have the exact same problem..... I can't get rid of Superuser, but I can't get access too use any root applications. SU denies all of them...
Go to this link here and where it says "Note: If you don't get root by other method root attempt with su and Superuser.apk already installed." download from that link.
http://www.mod2xtreme.com/showthread.php?13332-TOOL-ROOT-Razr-EternityProject-EasyRootICS-Win-Linux
It helped with Superuser not working properly.....
Im running ICS SlimROM 1.6 and (was) loving it. But:
Titanium Backup Pro prompted for an update, which I ran, then it barfed and told me to install BusyBox from the market
Installed BusyBox, which got TB to run
uninstalled WiFi tether ( not working, another issue.....)
Next full reboot of phone, its stuck at the Google Gears
Then:
I went into recovery, wiped cache, Dalvik and ran fix permissions
Reboot, stuck at Google Gears
Mounted SD in Recovery, copied my PH98img file to SD, fastboot and ran update
Still stuck at Google Gears
I need to get the file off of SD to get into Recovery again, but when I do, what next ? Full wipe ? Reflash ROM ?
Only thing I can think of is BusyBox broke the ROM......am I wrong ?
I was stuck doing a full reflash of the rom, fixes, updates etc.......only thing I can figure is that the supersu was gorked...... Superuser (chainsdd) from the market ended up on my phone after the busy box install and didn't want to work or be removed until reflash.
Sent from my ADR6425LVW using xda app-developers app
archalon said:
Im running ICS SlimROM 1.6 and (was) loving it. But:
Titanium Backup Pro prompted for an update, which I ran, then it barfed and told me to install BusyBox from the market
Installed BusyBox, which got TB to run
uninstalled WiFi tether ( not working, another issue.....)
Next full reboot of phone, its stuck at the Google Gears
Then:
I went into recovery, wiped cache, Dalvik and ran fix permissions
Reboot, stuck at Google Gears
Mounted SD in Recovery, copied my PH98img file to SD, fastboot and ran update
Still stuck at Google Gears
I need to get the file off of SD to get into Recovery again, but when I do, what next ? Full wipe ? Reflash ROM ?
Only thing I can think of is BusyBox broke the ROM......am I wrong ?
Click to expand...
Click to collapse
Most likely, you installed busybox to the /system/bin/ directory.
Uninstall it, restart your phone, then re-run the busybox installer, except this time make sure you select /system/xbin/ as the install path.
a.mcdear said:
Most likely, you installed busybox to the /system/bin/ directory.
Uninstall it, restart your phone, then re-run the busybox installer, except this time make sure you select /system/xbin/ as the install path.
Click to expand...
Click to collapse
I'm on CleanRom 4.4 and it runs fine. I have the BusyBox install app from the market. I currently have BusyBox 1.20.2 installed and it's installed in /system/bin. That's where it wanted to install it, so i let it. I have had no problems with it being there. Should I move it? What is the pros and cons of it being in /system/bin vs /system/xbin??
Thanks.
derek4484 said:
I'm on CleanRom 4.4 and it runs fine. I have the BusyBox install app from the market. I currently have BusyBox 1.20.2 installed and it's installed in /system/bin. That's where it wanted to install it, so i let it. I have had no problems with it being there. Should I move it? What is the pros and cons of it being in /system/bin vs /system/xbin??
Thanks.
Click to expand...
Click to collapse
If its working at /system/bin/ then its probably not an issue for you.
I have init.d scripts, and my init.rc calls for busybox to be located at /system/xbin/. If I accidentally installed busybox to /system/bin/, busybox and thus also my init.d scripts fail to load because the init.rc file still tries to load it all from /system/xbin/.
but, since its likely you didn't build your ROM yourself, you may not know exactly where its supposed to be installed. You could look at the original update script in the zip file that installed your ROM, because usually there will be an install path and associated symlinks in that script which you can then use to determine where busybox is supposed to be installed on your particular device. Or, if your ROM has init.d support, you can look in the /init.rc file for the lines where busybox is called to enable init.d support. Your install path for busybox should mimic whatever path is called in this file, meaning if its attempting to load busybox from /system/xbin/, then that is where you need to have busybox installed, and not /system/bin/.
a.mcdear said:
If its working at /system/bin/ then its probably not an issue for you.
I have init.d scripts, and my init.rc calls for busybox to be located at /system/xbin/. If I accidentally installed busybox to /system/bin/, busybox and thus also my init.d scripts fail to load because the init.rc file still tries to load it all from /system/xbin/.
but, since its likely you didn't build your ROM yourself, you may not know exactly where its supposed to be installed. You could look at the original update script in the zip file that installed your ROM, because usually there will be an install path and associated symlinks in that script which you can then use to determine where busybox is supposed to be installed on your particular device. Or, if your ROM has init.d support, you can look in the /init.rc file for the lines where busybox is called to enable init.d support. Your install path for busybox should mimic whatever path is called in this file, meaning if its attempting to load busybox from /system/xbin/, then that is where you need to have busybox installed, and not /system/bin/.
Click to expand...
Click to collapse
I'm running Scott's CleanRom 4.4. I've looked in the updater-script file inside the zip.
I see the line: symlink("/system/xbin/busybox","/system/bin/busybox");
So, I am assuming that it can be installed in either location. When I installed busybox using the busybox install app from the market, it has "Smart Install", it scans system memory and then recommends where to install everything so I just let it do that.
derek4484 said:
I'm running Scott's CleanRom 4.4. I've looked in the updater-script file inside the zip.
I see the line: symlink("/system/xbin/busybox","/system/bin/busybox");
So, I am assuming that it can be installed in either location. When I installed busybox using the busybox install app from the market, it has "Smart Install", it scans system memory and then recommends where to install everything so I just let it do that.
Click to expand...
Click to collapse
So, according to that symlink, the actual location of busybox should be in /system/xbin/, but has created a symbolic link to /system/bin/ because some applications look for it in that location as well.
on a linux system, the physical location is the first listed path, the symbolic link is created by the second path, which essentially allows you to run busybox from either location even though it is actually located in /system/xbin/ and not /system/bin/
make sense?
Hi,
what started as an Idea seems to be working now. For once i wanted a phone that has warranty for more than two weeks (or at least a chance for warranty).
DISCLAIMER:
Do all of this at your own risk. Even though we will not be flashing a custom recovery, technically the warranty is lost the moment you root your phone.
None of the Tools is actually written by me, i just tinkered a bit and came up with this tutorial.
1. You will need
- Galaxy A3 (mine was an A300FU but i guess every one that can be rooted without flashing should do) on Lollipop (5.0.2).
- Minimal ADB or some other software that brings debugging drivers and adb.
- KingRoot 4.60+
- SuperSu-ME (from play Store or an older version is also fine) or any other way to go from the Kinguser Root Management to SuperSU
- Deodexed apks matching you phone model
- Flashfire Beta
- Xposed Installer, I used 3.0alpha4
- Xposed bridge for Samsung lollipop I used xposed-v75-sdk21-arm-arter97-snapdragon_requestConcurrentGC
2. If something goes wrong:
- Odin and a stock LOLLIPOP ROM for your device!
This is Important: Since we dont have a custom recovery, whenever something goes wrong the only rescue is going back to a stock rom and thereby wiping. If everything works in the first go there will be no wipe.
3. Rooting
First we need to root. Thanks to KingRoot thats very easy and just a matter of waiting. Install KingRoot (has to be 4.60+ for Lollipop), Click try to Root, wait for it, done. Know we need to get rid of the KingRoot stuff again and install SuperSU (FlashFire does not support KingUser but SuperSU) thats what we need SuperSU-ME for. There Will be some Left overs since KingRoot converts itself to a system app, you can remove this with Titanium Backup or a ROM Toolbox of you choice.
4. Deodexing
Next step is gonna be Deodexing. This one is a little Tricky without a Custom Recovery. Flashing the Deodex using FlashFire will leave you stuck at the Boot Logo.
Unpack the Flashable Deodex zip. you#ll find a META-INF and a system folder. Copy the system folder (or rename it, doesnt matter) to your SDcard or the phone memory using USB. At this point you can also copy the two Xposed files (zip+apk). Next we need USB Debugging. Install the minimal ADB, browse to the install location and start "adb devices" once (this will start the daemon). Now take your phone, browse to settings / phone info and tap the build number like 10 times (this gives you developers options) now go to settings / developers options and enable USB debugging.
Connect you phone via USB. This hould bring up a dialog granting your PC permission to connect. Click Yes.
Connect to the phone and request root using
Code:
adb shell
su
Now turn on the phones screen there should be a root request, allow it.
Next is the following commands, assuming the location of the extracted system folder is /storage/extSdCard/deodex_system
Code:
mount -o rw,remount /system
rm -Rf /system/app
rm -Rf /system/priv-app
rm -Rf /system/framework
cp -R /storage/extSdCard/deodex_system/* /system
chown -R root:root /system/app
chown -R root:root /system/priv-app
chown -R root:root /system/framework
chmod -R 755 /system/app
chmod -R 755 /system/priv-app
chmod -R 755 /system/framework
rm -Rf /data/dalvik-cache/*
reboot
This will replace all system apks with the deodexed ones, sets the right owner and permissions, clears the dalvik cache and reboots. Booting is gonna take a while and then you're enjoying you're rooted, deodexed stock ROM without flashing anything so far. So now about installing Xposed.
Don't be to slow with thus step. Deleting the three folders will make the phone go crazy and at some point reboot, you should be done by then.
Edit: I did this on a second device now, for some reason the remount did not work. In this case try disabling SElinux (http://forum.xda-developers.com/devdb/project/dl/?id=12178) and then remount.
5. Xposed
Install the XposedInstaller apk file like any other app, no need to start it yet. Next install FlashFire and launch it (granting root access) now select the Option "OTA or ZIP" in Flashfire and select the flashable Xposed zip you downloaded earlier. No further settings needed just hit Flash! The next reboot is again gonna take a while, but after that you can launch the Xposed Installer and start Installing Modules. We're done.
Whenever you do a factory reset (from the recovery), You need to root again using Kingroot, replace it with SuperSU and install Xposed again.
Once more, I did not develop any of the tools mentioned, all credits to their respective authors.
Cheers,
prometh
Edit: I did not try too many modules yet but Wanam for lollipop works just fine and that useless S Whatever bar is a thing of the past
Hi.
I already have a rooted Galaxy A3 (A300FU) and I have TWRP as my recovery so my warranty is already gone and I'm not too worried about that. However I have had no success at trying to deodex my rom to be able to install xposed.
Would it be possible to just flash the deodexed and the xposed zip from TWRP? And with regards to the deodexed zip would it matter if I flash it over the top of my current rom when I'm using a carrier rom rather than the BTU unlocked rom?
Squall88uk said:
Hi.
I already have a rooted Galaxy A3 (A300FU) and I have TWRP as my recovery so my warranty is already gone and I'm not too worried about that. However I have had no success at trying to deodex my rom to be able to install xposed.
Would it be possible to just flash the deodexed and the xposed zip from TWRP? And with regards to the deodexed zip would it matter if I flash it over the top of my current rom when I'm using a carrier rom rather than the BTU unlocked rom?
Click to expand...
Click to collapse
I think this would be a question for the deodex thread I linked but heres my 5 cents: The procedure in your case should be Flashing Deodex (eventually also gapps_replacement from that thread if you get Google Apps FCs) flashing Xposed, booting, installing the xposed installer. The Deodexed zip is meant to be flashed on top of your system. What I described is basically doing manually what the deodex zip file would do (deleting copying...). Since you have twrp already, I guess a system backup wouldn't hurt.
Many thanks for the help. I'll make a nandroid backup of system first just in case and then give it a go.
Thanks again.
Impossible with my SG A3 A300FU
Hello, I already have the root and TWRP installed, but if I try to type the command line with ADB it doesn't work and if I flash the zip, it doesn't work too. Any Idee ? With the first or the second method boot loop with the samsung logo !!
darwin345 said:
Hello, I already have the root and TWRP installed, but if I try to type the command line with ADB it doesn't work and if I flash the zip, it doesn't work too. Any Idee ? With the first or the second method boot loop with the samsung logo !!
Click to expand...
Click to collapse
If you try the adb commands whats the exact error? Permission Problems? Anyway the Command line should do nothing else than flashing the zip file (I dont know what the zip file wipes after flashing but I assume its dalvik and cache).
Great work prometh696 !!! I managed to get xposed on my A5 with knox 0x0 !!!
Some other steps I followed to get it for my A500FU; first I extracted my own system folders system/app/, system/framework/ & system/priv-app/ with root explorer to my ext SD card and then copied it to my computer.
On the computer I batch deodexed those folders with joeldroid's batch deodexer:
http://forum.xda-developers.com/and.../script-app-joeldroid-lollipop-batch-t2980857
Had some issues there as not every Java version seems to deliver the deodexed folders without errors; more details in that topic.
Then I followed your adb commands and installed xposed, and as you said, knox didn't change and is still 0x0 !!!
Thanks again !!!
---------- Post added at 01:30 PM ---------- Previous post was at 01:06 PM ----------
prometh696 said:
If you try the adb commands whats the exact error? Permission Problems? Anyway the Command line should do nothing else than flashing the zip file (I dont know what the zip file wipes after flashing but I assume its dalvik and cache).
Click to expand...
Click to collapse
The command lines are for copying the deodexed apks (so not in a zip). The zip is for xposed and is flashed by flashfire.
But as he already got TWRP (and thus knox 0x1) I see no use for him to use your method anyway
prometh696 said:
If you try the adb commands whats the exact error? Permission Problems? Anyway the Command line should do nothing else than flashing the zip file (I dont know what the zip file wipes after flashing but I assume its dalvik and cache).
Click to expand...
Click to collapse
When I type the first command line after this one "rm -Rf /system/priv-app" or this one "rm -Rf /system/framework" I don't know when exactly my phone reboot and bootloop on samsung logo (dynamic one) ???
My mobile restart before end of commands line
Hi,
your solution seems really good but my mobile (A300FU) is retarting before I typed all commands line.
Do you know a solution ?
Maybe cause I've no ExtSDcard and use the internal card ?
Thank you for your help !!
Regards
Virtua
update : I tried with trwp and made the necessary but the mobile does not boot.
This phone is a mess
It's the first time I can't do what I want with a phone. All posts seems to be a hoax. ;( ;(
Whenever you do a factory reset (from the recovery), You need to root again using Kingroot, replace it with SuperSU and install Xposed again.
Click to expand...
Click to collapse
This is actually incorrect unless root is systemless.
Root remains in system, and so does xposed. A factory reset does not touch the system partition.
You lose root after a reset because you need to reinstall superuser. If you make it a system app you won't lose root even after a reset.
The same with xposed just reinstall the apk.
here is the scenario, I root my xperia Z1C (final stock firmware android 5.1.1) with kingoroot, then I try to replace superuser with supersu
for example with this guide:
https://forum.xda-developers.com/an...g/replace-kingoroot-supersu-manually-t3573361
I can set all write permissions in the system folder, use softwares like Link2SD with no problem,
but as soon as I try to change some system files (related to changing supersu), for example executing the following command:
Replace: /common/install-recovery.sh => /system/etc
my file manager (x-plore) returns a copy fail error and afterward all write permissions in system folder are denied.
even more strange thing happens if I root my phone with kingroot, and use this guide to replace it with supersu:
https://forum.xda-developers.com/a310/general/how-to-remove-replace-kingroot-kinguser-t3308989
script successfully installs the supersu and uninstall the kingroot, but after that all system write permissions are denied again, link2sd fails to install any app in system, even supersu can't install itself in system.
I appreciate any help, I think it's the cause of many other problems which rooted users are facing.