Hi to the Great XDA Team.
here is ma pickle
I've bought a Korean olleh Samsung s2 and it was running on 4.0.4 ISC ...
but it had all the Korean apps and look which i didn't like... so i tried to flash it with XXLQ6 firmware... but unfortunately it fails, I've tried it several times but its fails, I've checked the USB debugging also... it ticked.
i donn now where am i going wrong... now ma phone wont turn on... it only shows a screen which say "upgrade" and something in Korean.
help please...
classyandswank said:
Hi to the Great XDA Team.
here is ma pickle
I've bought a Korean olleh Samsung s2 and it was running on 4.0.4 ISC ...
but it had all the Korean apps and look which i didn't like... so i tried to flash it with XXLQ6 firmware... but unfortunately it fails, I've tried it several times but its fails, I've checked the USB debugging also... it ticked.
i donn now where am i going wrong... now ma phone wont turn on... it only shows a screen which say "upgrade" and something in Korean.
help please...
Click to expand...
Click to collapse
I think you could flash another firmware. Or make sure kies isn't running in the background. Even using another USB cable
Sent from my GT-I9100 using xda app-developers app
---------- Post added at 03:20 PM ---------- Previous post was at 02:25 PM ----------
Wait sorry. You are using Korean firmware and what firmware did you flash?
Sent from my GT-I9100 using xda app-developers app
preseodymium said:
I think you could flash another firmware. Or make sure kies isn't running in the background. Even using another USB cable
Sent from my GT-I9100 using xda app-developers app
---------- Post added at 03:20 PM ---------- Previous post was at 02:25 PM ----------
Wait sorry. You are using Korean firmware and what firmware did you flash?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
with build number - xwlpx
I'm really stuck... it jus shows a message on the screen which says "firmware upgrade encountered as issue. Please select recovery mode in Kies & try again"
it also allows me to go in the download mode but i donn know what to do after that... which rom to flash...
((((
I'm really really worried and sad.
IMEI number problem
I bought olleh galaxy s2.
I checked it's orgin using IMEI number.it says this 4n is made in CHINA.
I'm confused whether it's a chinese one...
plz give me a solution.
Related
Helllo, my i9082 was working fine, just battery draining problems...so i decided to flash it. SO, i flashed it with Odin307 and firmware I9082XXAMAB_I9082OXEAMA5_SER. Now my screen has become black and i only can hear sound.....help pls!!
BTW i forgot to enable usb debugging, and also i have usb jig to put in download mode. ODIN also detects phone in download mode but as i said screen is blank, no display. Somebody help
Could it be a driver problem? I flashed it successfully but with drivers I downloaded for i9300...do I need specific drivers for i9082?
andrew21 said:
Helllo, my i9082 was working fine, just battery draining problems...so i decided to flash it. SO, i flashed it with Odin307 and firmware I9082XXAMAB_I9082OXEAMA5_SER. Now my screen has become black and i only can hear sound.....help pls!!
Click to expand...
Click to collapse
Hey download frimware from sammobile.com and flash with odin .... n dnt wry ... u mobile will wrk ...
Sent from my GT-I9082 using xda premium
---------- Post added at 08:10 PM ---------- Previous post was at 08:06 PM ----------
http://www.mediafire.com/?y48diudv76wl8
Use this link n thanx to the uplodr ....
Sent from my GT-I9082 using xda premium
adheeshkurekar said:
Hey download frimware from sammobile.com and flash with odin .... n dnt wry ... u mobile will wrk ...
Sent from my GT-I9082 using xda premium
---------- Post added at 08:10 PM ---------- Previous post was at 08:06 PM ----------
http://www.mediafire.com/?y48diudv76wl8
Use this link n thanx to the uplodr ....
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
Checked out your link...says :the owner of this folder has not added any files"???
It's ok downloaded firmware from sammobile, just need to know should I flash with Odin 307 or Odin 304?
adheeshkurekar said:
Hey download frimware from sammobile.com and flash with odin .... n dnt wry ... u mobile will wrk ...
Sent from my GT-I9082 using xda premium
---------- Post added at 08:10 PM ---------- Previous post was at 08:06 PM ----------
http://www.mediafire.com/?y48diudv76wl8
Use this link n thanx to the uplodr ....
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
Hi Adheesh ur the king...did as you said and both my mobile are revived now...thanks a lot
Man you are one brave guy; flashing drivers meant for 9300 on 9082 (I assume you dont mean the USB drivers) ! Thank your lucky stars you only had a soft brick. Hard brick would have made your device go kaput! Anyway, all's well that ends well
Tianhe said:
Man you are one brave guy; flashing drivers meant for 9300 on 9082 (I assume you dont mean the USB drivers) ! Thank your lucky stars you only had a soft brick. Hard brick would have made your device go kaput! Anyway, all's well that ends well
Click to expand...
Click to collapse
Well, i meant usb drivers which work accross multiple devices...
andrew21 said:
Hi Adheesh ur the king...did as you said and both my mobile are revived now...thanks a lot
Click to expand...
Click to collapse
Hit thanks insted of saying thanks a lot ... just kiding ..... and nxt time dnt try other drivers I knw you flashed unvi which wrks with many devices .... but if its ur bad luck ... u might flash wrong drivers ... before flashing any thing / rooting ... just keep frimware of ur mobile soo that if anything goes wrong you can flash stock frimware throung odin (v3.04 im using it )
Sent from my GT-I9082 using xda premium
Hello everyone,
I've a big problem with the Samsung Galaxy SII of my mom (i9100). The phone stopped and nothing boot. The battery is charged full, I have put the good firmware but nothing.
The phone show "Samsung Galaxy SII", work 1 minutes and shutdown.
I think is a problem with the battery. You think not ?
I have to rebought a battery ?
Help me please
troufiniou said:
Hello everyone,
I've a big problem with the Samsung Galaxy SII of my mom (i9100). The phone stopped and nothing boot. The battery is charged full, I have put the good firmware but nothing.
The phone show "Samsung Galaxy SII", work 1 minutes and shutdown.
I think is a problem with the battery. You think not ?
I have to rebought a battery ?
Help me please
Click to expand...
Click to collapse
manage to boot in cwm and do a system reset? or reflash a stock ROM (if not in guarantee) ?
wishmas7er said:
manage to boot in cwm and do a system reset? or reflash a stock ROM (if not in guarantee) ?
Click to expand...
Click to collapse
If i'm go in the Recovery and when i'm choose wipe data, the phone shutdown
Can u chevk woth other battery
Sent from my GT-I9100 using xda premium
---------- Post added at 04:20 PM ---------- Previous post was at 04:16 PM ----------
Try with other battery
Try to clean usb port,battery pins with alcochol
Take off battery for 10-15min
Charge agai n
If no go its hardware problem and u have take to service check this steps first
Sent from my GT-I9100 using xda premium
Nop :crying: I don't have another battery but now the phone don't want to go in the Download Mode. He say me Low Battery.
So I think is a battery problem.
Do u know anbody with sgs2
If not order new battery shouldnt be that expensive
Sent from my GT-I9100 using xda premium
---------- Post added at 06:12 PM ---------- Previous post was at 06:11 PM ----------
How old is that battery?
Sent from my GT-I9100 using xda premium
Hi, I'm trying to update my s3 from 4.1.2 to 4.3..I was able to download the update ok but when I install it, it only goes to 25% then briefly shows a wee Android guy on his back with a red triangle. Then the phone reboots and I get a message saying that the firmware update has failed.. I've got stock firmware and have never tampered with it using custom firmware or any of that rubbish.. Can anyone help please
Sent from my GT-I9505 using xda app-developers app
YIKES1412 said:
Hi, I'm trying to update my s3 from 4.1.2 to 4.3..I was able to download the update ok but when I install it, it only goes to 25% then briefly shows a wee Android guy on his back with a red triangle. Then the phone reboots and I get a message saying that the firmware update has failed.. I've got stock firmware and have never tampered with it using custom firmware or any of that rubbish.. Can anyone help please
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Which firmware are you trying to install and how are you trying to install it.
Like I said in my post, I'm on 4.1.2 and am trying to install 4.3..It's an over the air update.
Sent from my GT-I9505 using xda app-developers app
A guess you are rooted so OTA as per the faqs and guides has failed .
Use Kies or flash a rom via Odin .
A guess as the OP is lacking information .
But whatever you are posting in the wrong forum if you have an I9305 .
No i am not rooted. As i stated in my op, I am on stock firmware and have never tampered with it... And I do mean NEVER as in not rooted or any other of the goobldegook things that gets spoke in here... Now can anyone tell me how to sort this bug out?
Sent from my GT-I9505 using xda app-developers app
Im posting using my s4..its my wifes s3 that I'm trying to get sorted... Is that ok?
Sent from my GT-I9505 using xda app-developers app
Not with your attitude go ask Samsung this is a developers forum .
Any advice from here is as said Use Kies to update or flash a stock rom via odin . We cannot fix OTA by any other methods .
Well **** off you dickhead
Sent from my GT-I9505 using xda app-developers app
I don't understand this kind of people. Please help me sort something and then he isn't using any stuff that is described here but still need suggestion...
And at the end this kind of language...
ccc...
YIKES1412 said:
Like I said in my post, I'm on 4.1.2 and am trying to install 4.3..It's an over the air update.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
The question about the firmware was not the version I could read that it was what country or carrier specific type UK, (BTU), O2, Vodafone or whatever.
You really need to calm down otherwise you wont get help people will ignore you and the mods will be the one that close your threads and ban you, are you this aggressive towards people you work with.
The less detail you give the less we can get help, so we ask the questions to try and find out exactly what you are wanting to do, just updating 4.1.2 to 4.3 isn't enough on an international forum.
Sorry was seriously stressed at the time. And i took some of these replies to be seriously condescending.
I'm in the uk and using an unbranded s3..I've factory reset the thing and it still has the same error. I also booted it holding the up, home and off button. Then cleared thr cache. Still thr problem remains.
Sent from my GT-I9505 using xda app-developers app
Hi
This has just happened to me today as well. My phone kept getting the you need to wait your turn message and then it finally downloaded today but upon install it got to 27 percent and rebooted back up.
It how says it is the latest version.
I'm also in the UK on Three however my phone is rooted but I did run triangle away to reset the counter and disable supersu first.
It is running stock firmware - JZO54K.I9300XXEMG4
I guess ill install using Kies later. I hope it can install with losing anything? Ill read up later - just driven back from Scotland back to Midlands so a little tired atm
Sent from my GT-I9300 using xda app-developers app
JJEgan said:
A guess you are rooted so OTA as per the faqs and guides has failed .
Use Kies or flash a rom via Odin .
A guess as the OP is lacking information .
But whatever you are posting in the wrong forum if you have an I9305 .
Click to expand...
Click to collapse
U dun even get ota if u are rooted.
Sent from my GT-I9300.
Give a thank if i helped you.
---------- Post added at 04:57 PM ---------- Previous post was at 04:56 PM ----------
YIKES1412 said:
Sorry was seriously stressed at the time. And i took some of these replies to be seriously condescending.
I'm in the uk and using an unbranded s3..I've factory reset the thing and it still has the same error. I also booted it holding the up, home and off button. Then cleared thr cache. Still thr problem remains.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
U are not even using the gs3. If u are using other types of gs3. I can still understand. BUT U ARE USING A GS4?
Sent from my GT-I9300.
Give a thank if i helped you.
Hi Yellow Yogult
You can get OTA when rooted you just need to ensure your counter is reset and also the status is set back as normal using triangleaway as it describes.
I believe the other guy said earlier that it was his wifes s3 but he has an s4 (or was it the other way round?).
I'm just going to follow the advise to use Kies instead though after a little reading up.
Sent from my GT-I9300 using xda app-developers app
---------- Post added at 11:01 AM ---------- Previous post was at 10:53 AM ----------
Sorry - JellyYogult
Sent from my GT-I9300 using xda app-developers app
What I'm using to message in here with is an irrelevance. I'm using my own s4..it is my wifes s3 that is having the problems... I've already explained this once. Am I going to have to keep doing so?
Sent from my GT-I9505 using xda app-developers app
YIKES1412 said:
Am I going to have to keep doing so?
Click to expand...
Click to collapse
Yikes, you do realise people are less likely to put themselves out to help if you type your messages with an attitude each time?
---------- Post added at 12:44 PM ---------- Previous post was at 12:19 PM ----------
Just as an update....
Following the advise given previously, I have used Kies instead of the OTA and the update has worked perfectly with no issues.
Thanks
bilb said:
Hi Yellow Yogult
You can get OTA when rooted you just need to ensure your counter is reset and also the status is set back as normal using triangleaway as it describes.
I believe the other guy said earlier that it was his wifes s3 but he has an s4 (or was it the other way round?).
I'm just going to follow the advise to use Kies instead though after a little reading up.
Sent from my GT-I9300 using xda app-developers app
---------- Post added at 11:01 AM ---------- Previous post was at 10:53 AM ----------
Sorry - JellyYogult
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Well. If u are rooted, u can nvr be Official in device status as the phone checks if u are rooted every time u restart. So even if u use triangle away, when u reboot. U are still rooted. So the device status will STILL be MODIFIED. I did it
JellyYogurt said:
Well. If u are rooted, u can nvr be Official in device status as the phone checks if u are rooted every time u restart. So even if u use triangle away, when u reboot. U are still rooted. So the device status will STILL be MODIFIED. I did it
Click to expand...
Click to collapse
Not quite true. triangle away has the ability for this reason to reboot and fix the status from modified into normal.
I've just looked up a guide to basically how I did it.
h-t-t-p://droidlessons.com/how-to-enable-ota-updates-on-rooted-samsung-galaxy-s3
** ok it seems I cannot post links to other sites yet... **
bilb said:
Not quite true. triangle away has the ability for this reason to reboot and fix the status from modified into normal.
I've just looked up a guide to basically how I did it.
h-t-t-p://droidlessons.com/how-to-enable-ota-updates-on-rooted-samsung-galaxy-s3
** ok it seems I cannot post links to other sites yet... **
Click to expand...
Click to collapse
Have u tried it? Cos when i used ta, my status is still modified until i temp unroot.
Sent from my GT-I9300.
Give a thank if i helped you.
Yeah, as I said previously it worked fine. Downloaded the 4.3 update through OTA however upon install stopped at 27 percent and just rebooted back.
I guess it would just be more sensible just use Kies anyway as it was very easy.
Ill sort out that thanks
Sent from my GT-I9300 using xda app-developers app
Hi guys,
Currently running an Omega ROM on my S3 but I've just upgraded to a Note 3 and was wondering how to reset the S3 to default firmware + settings etc before selling it?
Cheers
Hey
First use triangle away then flash a stock firmware for your region..use sammobile.com for firmware..
Done
Sent from my GT-I9300 using xda app-developers app
---------- Post added at 07:59 AM ---------- Previous post was at 07:49 AM ----------
Or u can try using this guide
http://forum.xda-developers.com/showthread.php?t=2323847
Sent from my GT-I9300 using xda app-developers app
Thanks mate, but unfortunately I've got slow internet (50kb/s) and my browser is telling me there is 1 day+ left to download the 1.1GB file. My internet sometimes disconnects so it will be near impossible for me to download this file!
Does anyone know of any other websites you can download from? Perhaps a torrent file...
The file I need is this one... http://www.sammobile.com/firmwares/3/?download=27156
Much appreciated.
bump
Hello guys
I've been searching for a few days how to fix this problem but nothing helps, so I came to ask here.
I've tried flashing emergency firmware , also with .pit files ; tried repairing it with KIES too. Nothing.
It's S3 Blue 16gb version.
It's impossible to get into recovery , but I managed to get in it with CWM(after trying at least 100 times) , and these are the errors I got.
i.imgur.com/duLiUsD.jpg
i.imgur.com/aVgSvLt.jpg
i.imgur.com/GRxIyhD.jpg
It shows Samsung galaxy S III logo and stays there or reboots all the time.
I can get into download mode and flash whatever I want with odin, but whatever I flash, same issue.
Looking forward to your advices/help. Anything would be appriciated.
Ask here
http://forum.xda-developers.com/showthread.php?t=1964572
Sent from my C6902 using xda app-developers app
crohit911 said:
Ask here
http://forum.xda-developers.com/showthread.php?t=1964572
Sent from my C6902 using xda app-developers app
Click to expand...
Click to collapse
I can't post there mate.. Thanks for asking for me!
I really miss my phone >:
decept0r said:
I can't post there mate.. Thanks for asking for me!
I really miss my phone >:
Click to expand...
Click to collapse
Sure.
I copy -pasted for better access.
Sent from my C6902 using xda app-developers app
Maybe wrong firmware dude
Mostix said:
Maybe wrong firmware dude
Click to expand...
Click to collapse
You really think so?
I've tried both , 4.1.2 and 4.3 from emergency firmware
crohit911 said:
Ask here
http://forum.xda-developers.com/showthread.php?t=1964572
Sent from my C6902 using xda app-developers app
Click to expand...
Click to collapse
I fail to see the reference to Boeffla in this post, why direct him there?
Guys any advice would be nice.. Phone doesn't have warranty
DiReis said:
I fail to see the reference to Boeffla in this post, why direct him there?
Click to expand...
Click to collapse
I thought people in there might be able to help him.
Because that's a dev. Thread, and active one. Just trying to seek attention. Sorry for posting in wrong thread.
Sent from my C6902 using xda app-developers app
---------- Post added at 07:51 PM ---------- Previous post was at 07:28 PM ----------
did you try the JIG usb?
If you get into download mode, try to flash the older firmware ICS
Sent from my C6902 using xda app-developers app
decept0r said:
Hello guys
I've been searching for a few days how to fix this problem but nothing helps, so I came to ask here.
I've tried flashing emergency firmware , also with .pit files ; tried repairing it with KIES too. Nothing.
It's S3 Blue 16gb version.
It's impossible to get into recovery , but I managed to get in it with CWM(after trying at least 100 times) , and these are the errors I got.
i.imgur.com/duLiUsD.jpg
i.imgur.com/aVgSvLt.jpg
i.imgur.com/GRxIyhD.jpg
It shows Samsung galaxy S III logo and stays there or reboots all the time.
I can get into download mode and flash whatever I want with odin, but whatever I flash, same issue.
Looking forward to your advices/help. Anything would be appriciated.
Click to expand...
Click to collapse
I had that issue before. Try to update your version of CWM or just change and use philz TWRP. Then wipe/format data, system, cache and dalvik then try again to flash the rom of your choice :fingers-crossed:
crohit911 said:
I thought people in there might be able to help him.
Because that's a dev. Thread, and active one. Just trying to seek attention. Sorry for posting in wrong thread.
Sent from my C6902 using xda app-developers app
---------- Post added at 07:51 PM ---------- Previous post was at 07:28 PM ----------
did you try the JIG usb?
If you get into download mode, try to flash the older firmware ICS
Sent from my C6902 using xda app-developers app
Click to expand...
Click to collapse
I can get into download mode without any problems.
I can't seem to find ICS on google. Maybe you have download link for it so I can try flashing it with odin?
Thanks!:fingers-crossed:
adam neal said:
I had that issue before. Try to update your version of CWM or just change and use philz TWRP. Then wipe/format data, system, cache and dalvik then try again to flash the rom of your choice :fingers-crossed:
Click to expand...
Click to collapse
I need to try like 100x times to just get into CWM and then when i try to wipe I get those errors I posted in photos.
Philz / TWRP doesn't even want to boot into them.
When I boot into recovery there is android standing and some sort of progress bar and it starts to fill and the phone restarts to galaxy logo again..
Bump //
I tried flashing stock ICS but no luck.
I flashed stock ICS with "T flash" and " NAND erase " turned on and I just got android Downloading mode.
Then, I went to Kies and did firmware repair and I got past Galaxy screen and phone started turning on and installing apps
and rebooted again with the same issues.
Guys, any advices? Is MBO dead?
Where do you download firmware from? Samsung - updates. Com?
Sent from my nexus one_dev beta using xda app-developers app
---------- Post added at 09:57 PM ---------- Previous post was at 09:55 PM ----------
Nand erase and auto reboot only should be on.
Sent from my nexus one_dev beta using xda app-developers app
---------- Post added at 09:58 PM ---------- Previous post was at 09:57 PM ----------
Or only nand erase
Sent from my nexus one_dev beta using xda app-developers app
crohit911 said:
Where do you download firmware from? Samsung - updates. Com?
Sent from my nexus one_dev beta using xda app-developers app
---------- Post added at 09:57 PM ---------- Previous post was at 09:55 PM ----------
Nand erase and auto reboot only should be on.
Sent from my nexus one_dev beta using xda app-developers app
---------- Post added at 09:58 PM ---------- Previous post was at 09:57 PM ----------
Or only nand erase
Sent from my nexus one_dev beta using xda app-developers app
Click to expand...
Click to collapse
From sammobile.com
I've tried everything, I guess I'll try one more time with only nand erase. Thanks for answering tho
decept0r said:
From sammobile.com
I've tried everything, I guess I'll try one more time with only nand erase. Thanks for answering tho
Click to expand...
Click to collapse
bump, any ideas guys? thanks
Feeling sad for u bro..
What were you doing when this happened?
I mean what did you do that resulted in this disaster?
Sent from my C6902 using XDA Free mobile app
crohit911 said:
Feeling sad for u bro..
What were you doing when this happened?
I mean what did you do that resulted in this disaster?
Sent from my C6902 using XDA Free mobile app
Click to expand...
Click to collapse
happened over night while it was charging...
decept0r said:
happened over night while it was charging...
Click to expand...
Click to collapse
I guess you're out of luck then, same happened with me when I was a kid to my sgh j210 I had to get it's pcb replaced. They say it's due to overcharging but Android kernel won't let that happen. I'm confused too.
Sent from my nexus one_dev beta using xda app-developers app
crohit911 said:
I guess you're out of luck then, same happened with me when I was a kid to my sgh j210 I had to get it's pcb replaced. They say it's due to overcharging but Android kernel won't let that happen. I'm confused too.
Sent from my nexus one_dev beta using xda app-developers app
Click to expand...
Click to collapse
Changed MBO ; Only solution ... Thanks for your help tho