I saw a youtube video where its showing as that i need to download insecure kernal for my S2 1st then root the phone.. what is the best easy and no error way of doing this??
http://www.youtube.com/watch?v=CCgncF59mwE
This is the link I saw...ABOVE...
I've already bricked my phone once...
I did rooting using the CF root guide, everything was done proper...when my phone restarted it stuck at exclamation mark and never started. I had to go to shop and they upgraded me again for me...it was for free obviously...
I dont want to get into the trouble but I really want to root my phone and want some mods for my phone, like better battery power, faster processor and good experience..
In the following link,
http://forum.xda-developers.com/showthread.php?t=1619525
In I9100 Insecure and Original ICS Kernels...
My mobile kernal is showing as
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So according to that I should download this right??
Kernel_I9100XWLP7_INSECURE.zip
Anyone can please suggest me on this??
Use the zedomax tutorials. Its clear and easy to understand. That's how I rooted my phone
Sent from my GT-I9100 using xda app-developers app
ronak123456 said:
I saw a youtube video where its showing as that i need to download insecure kernal for my S2 1st then root the phone.. what is the best easy and no error way of doing this??
http://www.youtube.com/watch?v=CCgncF59mwE
This is the link I saw...ABOVE...
I've already bricked my phone once...
I did rooting using the CF root guide, everything was done proper...when my phone restarted it stuck at exclamation mark and never started. I had to go to shop and they upgraded me again for me...it was for free obviously...
I dont want to get into the trouble but I really want to root my phone and want some mods for my phone, like better battery power, faster processor and good experience..
Anyone can please suggest me on this??
Click to expand...
Click to collapse
Have a look here for a "brick-bug-free" rooting method => http://forum.xda-developers.com/showthread.php?p=28178105 (Method 1).
Good luck !
Hey,
just a few steps:
1) Download Odin (http://androidfirmwares.net/Tools)
2) Download root kernel (http://forum.xda-developers.com/showthread.php?t=1103399)
-- just scroll down and search for ur version (settings>about phone>basis version)
3) Flash it via Odin
-- Extract .zip
-- load the root kernel in Odin (as PDA)
-- Put SGSII in download mode (Vol-, Home and Powerbutton)
-- Press "Start"
Much succes
CHEERS
Just look back at the answers you got in your previous "I want to root my phone" threads.
Looks like everyone there wasted their time!
Sorry guys for not replying to you all...
preseodymium - Thanks for the fast reply...but when going through posts i read that it has problems.
It_ler - Thanks for replying fast - I saw that link and am really confused and dnt understand even after reading the method 1...it's complicated..
Hannibal226 - I think i said that CF root always failed for me, so it's not worth doing that...
theunderling - I understand that, however i wanted to root so that I can get access to what i need....but i failed.
2nd time I did brick my phone, I used the insecure kernal that is according to my phone: Kernel_I9100XWLP7_INSECURE.zip
even after getting a PASS in Odin, my phone did not start just got stuck at exclamation mark...so sad
ronak123456 said:
Sorry guys for not replying to you all...
preseodymium - Thanks for the fast reply...but when going through posts i read that it has problems.
It_ler - Thanks for replying fast - I saw that link and am really confused and dnt understand even after reading the method 1...it's complicated..
Hannibal226 - I think i said that CF root always failed for me, so it's not worth doing that...
theunderling - I understand that, however i wanted to root so that I can get access to what i need....but i failed.
2nd time I did brick my phone, I used the insecure kernal that is according to my phone: Kernel_I9100XWLP7_INSECURE.zip
even after getting a PASS in Odin, my phone did not start just got stuck at exclamation mark...so sad
Click to expand...
Click to collapse
if ur phone is currently running on ICS then flash the .tar file of siyah kernel v4.1.5 or Dorimanx v5.89 from ODIN and ur phone will be rooted
Sun90 - Thanks for fast reply....Yes my phone is running ICS and now i have a new version that is Android 4.0.4...can you provide me link???
Here is the screenshot of my new version...
What is the link
ronak123456 said:
Sorry guys for not replying to you all...
Hannibal226 - I think i said that CF root always failed for me, so it's not worth doing that...
Click to expand...
Click to collapse
ronak123456 said:
Sun90 - Thanks for fast reply....Yes my phone is running ICS and now i have a new version that is Android 4.0.4...can you provide me link???
Here is the screenshot of my new version...
What is the link
Click to expand...
Click to collapse
Ok sorry I didn't read this info, I think.
So here u find the Siyah kernel, this is the second way (like Sun said):
Siyah 4.1.5
Load the Odin (.tar) version and do the same like I said above just with Siyah instead of CF.
PS: But have to say that it's a bit crazy that it didn't work for u
Anyway much success and sorry for not directly answering this way with Siyah.
CHEERS
What sun90 said basically summarises what the zedomax tutorials are about. Instead of the kernels he have in his videos, use the siyah kernel and follow the instructions and you should be fine.
Sent from my GT-I9100 using xda app-developers app
Thats what the problem us and its really stupid and irritatig after following all the steps correctly and getting a pass in odin...still my s2 is **** huh..always stucks at exclamation mark...
If i did this again, can i switch back to the one i actually had to make my phone working as usual and normally..instead going in store again and again and they upgrading it for me..can i not do that??
Sent from my GT-I9100 using xda app-developers app
So have you tried rooting by the recovery way,mentioned earlier.
Yes i have tried and did 2 times...last i tried was yesterday and still same issue got stuck at exclamation mark..idk whats wrong that am dng i want the root access
Sent from my GT-I9100 using xda app-developers app
This thread that is saying that we can root the phone from recovery mode??? Is it that easy to do?? can I try that
http://forum.xda-developers.com/showthread.php?t=1746794
If I do, what should I do 1st???
Also, I'm talking about the Method 1 that is
Method 1 - Recommended
Push superuser + Busybox (Now v1.20.2 from Linus Yang) in recovery
ronak123456 said:
This thread that is saying that we can root the phone from recovery mode??? Is it that easy to do?? can I try that
http://forum.xda-developers.com/showthread.php?t=1746794
If I do, what should I do 1st???
Also, I'm talking about the Method 1 that is
Method 1 - Recommended
Push superuser + Busybox (Now v1.20.2 from Linus Yang) in recovery
Click to expand...
Click to collapse
You can do that, but to be on the safe side I would flash a custom kernel instead, so you're not suspectible to the eMMC brick bug.
But, look at Phil's other rooting method which is safe, and you can still flash in stock recovery.
23732 said:
You can do that, but to be on the safe side I would flash a custom kernel instead, so you're not suspectible to the eMMC brick bug.
But, look at Phil's other rooting method which is safe, and you can still flash in stock recovery.
Click to expand...
Click to collapse
Well, I've already got 2 times stuck with an exclamation mark...I dont know what to do exactly..as it's written in the 1st method..it says i need CWM image something, it's so technical written, very difficult to understand, also there are so many attachments which to download and all...please help..
ronak123456 said:
Well, I've already got 2 times stuck with an exclamation mark...I dont know what to do exactly..as it's written in the 1st method..it says i need CWM image something, it's so technical written, very difficult to understand, also there are so many attachments which to download and all...please help..
Click to expand...
Click to collapse
Here, use this kernel: http://www.mediafire.com/?p3u71c1uqc6s2m5
Put it on your SD card and flash in stock recovery.
The kernel includes root, Busybox, SuperSU app, permanent CWM and is not suspectible to eMMC brickbug.
Original thread: http://forum.xda-developers.com/showthread.php?t=1877270
I am still dicy about trying this...want to try but if i still get stuck at exclamation mark...how do i go about making my phone normal and working again as it was??
Sent from my GT-I9100 using xda app-developers app
Lol stock xwlpw like you posted earlier.See sammobile.com.
You cant get an easier method than flashing 1 file in recovery in order to get root and safe kernel.
If you stay unrooted and using stock look at everything your missing out on.
I just want the root access..and i dnt know what to do...wish someone could do it for me lol...btw as per my new version will that work in recovery mode if i do?
Sent from my GT-I9100 using xda app-developers app
Related
Telus Fascinate 3G+ recently got updated to Gingerbread and here is how to root it.
Things that you need
1.Speedmod Kernel
2.Stock GB kernel [attatched below]
How?
1. First flash the Speedmod kernel via odin [vol down + connect the usb]
2. uncheck repartion, auto reboot option and flash it
3. go to recovery mod [vol up & down + power button]
4. go to speedmod advanced option menu
5. root your device
6. flash back to Stock Telus GB kernel via odin
This works??? I'm assuming it do since you posted it. God damn, thank you so much. Really. I have so many I use on a regular basis that I couldn't use because I couldn't get root.
In total since yesterday I've reset my phone 7 times from trying different things.
Will those phone boot on this kernel? and is their any advantages over the stock kernel?
Do you know a good, fool proof method I can rip this rom for others?
Thanks Again.
Maniac
MrManiacNF said:
This works??? I'm assuming it do since you posted it. God damn, thank you so much. Really. I have so many I use on a regular basis that I couldn't use because I couldn't get root.
In total since yesterday I've reset my phone 7 times from trying different things.
Will those phone boot on this kernel? and is their any advantages over the stock kernel?
Do you know a good, fool proof method I can rip this rom for others?
Thanks Again.
Maniac
Click to expand...
Click to collapse
Hey
This is just showing you that how to root. and the stock kernel has nothing its just original kernel.
From my understanding, other sgs and telus fascinate has diffrent bootloader system. And also to create Custom Rom, we need source, but we dont right now. We have to w8 for it.
Thanks,
Confimed! Works.
Just to confirm for others this works perfect for rooting the 2.3.3 GB stock update for Telus Fascinate. I didn't try booting while I had the speedmod kernel flashed. Happy with root right now.
harimgs said:
Telus Fascinate 3G+ recently got updated to Gingerbread and here is how to root it.
Things that you need
1.Speedmod Kernel
2.Stock GB kernel [attatched below]
How?
1. First flash the Speedmod kernel via odin [vol down + connect the usb]
2. uncheck repartion, auto reboot option and flash it
3. go to recovery mod [vol up & down + power button]
4. go to speedmod advanced option menu
5. root your device
6. flash back to Stock Telus GB kernel via odin
Click to expand...
Click to collapse
if you have root, would you mind dumping the firmware? since the telus fascinate is (mostly) a rebranded tmobile vibrant, I'd like to be able to have someone look at the firmware blobs for GPS for use with CM. Can't find an ODIN-able package to tear apart anywhere (haven't looked in a day or so though).
Worked brilliantly. (and I'm an Android noob too!)
Thanks!
MrManiacNF said:
Just to confirm for others this works perfect for rooting the 2.3.3 GB stock update for Telus Fascinate. I didn't try booting while I had the speedmod kernel flashed. Happy with root right now.
Click to expand...
Click to collapse
Total n00b question, but what do I need to set in Odin to use these files - unchecking repartition and reboot is straightforward - but where do I set up the TAR for the kernel (In the past I have use SGS kernel flasher - but that needs root - hence my predicament LOL).
All help, advice, and fu appreciated.
Click on the PDA box in Odin and choose Speedmod Kernel. Uncheck those boxes on the left and then put your phone in download mode.
Click start and pray.
The rest of the directions are pretty straight forward. Follow those same principals for dumping the stock kernel back on the phone.
Like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
karmatose said:
Click on the PDA box in Odin and choose Speedmod Kernel. Uncheck those boxes on the left and then put your phone in download mode.
Click start and pray.
The rest of the directions are pretty straight forward. Follow those same principals for dumping the stock kernel back on the phone.
Click to expand...
Click to collapse
Great - and sorry, how do I get the phone in download mode (read another odin how to, it says a box will turn yellow which happens with just the down vol while connecting the USB).
Power the phone off.. Have your usb cable on hand.
Plug the phone in, press vol down + power on. You'll know immediately if it worked. Took me a few tries to figure it out.
karmatose said:
Power the phone off.. Have your usb cable on hand.
Plug the phone in, press vol down + power on. You'll know immediately if it worked. Took me a few tries to figure it out.
Click to expand...
Click to collapse
Great and THANKS! I have the droid digger on now ... odin is performing 'file analysis'.
I'm guessing this takes a bit of time.
LOL.. Couldn't tell ya. I did mine yesterday afternoon and that seems like ages ago. Heck, I can't remember what I had for breakfast.
Kids, don't do drugs.
karmatose said:
LOL.. Couldn't tell ya. I did mine yesterday afternoon and that seems like ages ago. Heck, I can't remember what I had for breakfast.
Kids, don't do drugs.
Click to expand...
Click to collapse
LOL - I tend to be a bit impatient which causes more problems than not. Odin is still 'File Analysis' so seems to be taking a bit ... not sure how long flashing the speedmod kernel itself should take.
jpmccarthy said:
LOL - I tend to be a bit impatient which causes more problems than not. Odin is still 'File Analysis' so seems to be taking a bit ... not sure how long flashing the speedmod kernel itself should take.
Click to expand...
Click to collapse
No - I was doing something wrong - tried it again from the start and it was super fast applying the changes - and now ROOTED. Thanks so much for the help!!!
Thanks for this!
By the way, how did you get the kernel? Do you also have the stock rom to flash with odin? Might be useful.
tenthousandfeet said:
Thanks for this!
By the way, how did you get the kernel? Do you also have the stock rom to flash with odin? Might be useful.
Click to expand...
Click to collapse
read the first post, both download links are there.
thanks for the image karmatose, i kept on putting the tar file in the phone box.
this method works perfectly.
Has anyone gotten cwm recovery working?
Sent from my SGH-T959D using XDA App
jpmccarthy said:
Has anyone gotten cwm recovery working?
Sent from my SGH-T959D using XDA App
Click to expand...
Click to collapse
I tried flashing it from rom manager but the stock recovery wouldn't take the unsigned update.zip.
koocheese said:
read the first post, both download links are there.
thanks for the image karmatose, i kept on putting the tar file in the phone box.
this method works perfectly.
Click to expand...
Click to collapse
I'm looking for a flashable gingerbread, not just the kernel.
tenthousandfeet said:
I tried flashing it from rom manager but the stock recovery wouldn't take the unsigned update.zip.
Click to expand...
Click to collapse
Same.
Sent from my SGH-T959D using XDA App
Gingerbread Guide
Ice Cream Sandwich use Triangleaway
First I would like to thank creepyncrawly!
If it wasn't for his post here, I wouldn't have bothered trying this method or writing this up.
USE AT YOUR OWN RISK!
**MIUI & CM7 USERS SCROLL DOWN**
1. Download Mobile Odin Lite (Download) or Pro (Market)
If using Lite then install this APK next - (Download)
2. Download and copy to device - StockKernel-PDA.tar
3. Open Mobile Odin > select Kernel > StockKernel-PDA.tar
4. Scroll down to FLASH FIRMWARE
It will now reboot, wait a few minutes...
5. After it reboots go back to Mobile Odin and flash Entropy or Siyah kernel using the TAR or zImage file (zips don't work).
MIUI & CM7 Users
1. Boot in recovery and do a Nandroid backup!
2. Wipe everything and restore to 2.3.4 or 2.3.6 based ROM (UnNamed, ShoStock, etc)
3. Download Mobile Odin Lite (Download) or Pro (Market)
If using Lite then install this APK next - (Download)
4. Download and copy to device - StockKernel-PDA.tar
5. Open Mobile Odin > select Kernel > StockKernel-PDA.tar
6. Scroll down to FLASH FIRMWARE
It will now reboot, wait a few minutes...
7. After it reboots go back to Mobile Odin and flash Siyah kernel using the TAR or zImage file (zips don't work).
8. Restore CM7/MIUI from the backup
INSTRUCTIONS FOR TRIANGLEAWAY TO BE POSTED LATER!
If this helped you in anyway please show your THANKS!
Cause we all love pictures.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Other than pictures, how does your thread differ from this one that already has a detailed step by step on how to use Mobile Odin?
Red5 said:
Other than pictures, how does your thread differ from this one that already has a detailed step by step on how to use Mobile Odin?
Click to expand...
Click to collapse
That's to avoid the triangle, this is if you have it already and want to do everything without a computer.
LiLChris06 said:
That's to avoid the triangle, this is if you have it already and want to do everything without a computer.
Click to expand...
Click to collapse
Your title says how to remove warning triangle. Avoid, remove... its the same thing. The other thread gives step by step on how to remove, avoid and how to use Mobile Odin all in one shot.
So again, how does this thread differ?
Red5 said:
Your title says how to remove warning triangle. Avoid, remove... its the same thing. The other thread gives step by step on how to remove, avoid and how to use Mobile Odin all in one shot.
So again, how does this thread differ?
Click to expand...
Click to collapse
I guess I missed it but where does it show in that guide how to remove it using Mobile Odin? I see how to flash a new kernel without ever getting the triangle.
His other guide here (which is in the OP), shows how to remove it with a computer.
If its there and I am blind then by all means you can close the thread and I am sorry.
Thanks for the write up!
Sent from my AT&T cellular device.
Are you sure that this removes the warning sign?
Since it's an on-device flash I'd be shocked if it removes it. Only download mode (Odin/Heimdall) flashes trigger changes to the warning screen. That's how we can flash custom kernels on-device without triggering it.
Thanks.. finally that annoying triangle is gone!!!
Just did it following the op's instructions and it does remove the triangle on boot. After flashing entropy's 1/23 release cause it was a tar file there still wasn't a triangle. I then flashed his 1/29 release via cwm and there is still no triangle on boot.
Thanks op for a quick, easy, and painless way of getting rid of it.
Entropy512 said:
Are you sure that this removes the warning sign?
Since it's an on-device flash I'd be shocked if it removes it. Only download mode (Odin/Heimdall) flashes trigger changes to the warning screen. That's how we can flash custom kernels on-device without triggering it.
Click to expand...
Click to collapse
Yup I did it last night if you want I can do a video but that's not till the weekend if I get a chance.
Sent from my SAMSUNG-SGH-I777 using XDA App
Confirmed. Totally got rid of the stupid triangle. Very easy.
Sent from my SAMSUNG-SGH-I777 using XDA App
wilberatilioa said:
Thanks.. finally that annoying triangle is gone!!!
Click to expand...
Click to collapse
NJGSII said:
Just did it following the op's instructions and it does remove the triangle on boot. After flashing entropy's 1/23 release cause it was a tar file there still wasn't a triangle. I then flashed his 1/29 release via cwm and there is still no triangle on boot.
Thanks op for a quick, easy, and painless way of getting rid of it.
Click to expand...
Click to collapse
Karashta said:
Confirmed. Totally got rid of the stupid triangle. Very easy.
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
Good to know!
Glad I can help this awesome community.
LiLChris06 said:
Good to know!
Glad I can help this awesome community.
Click to expand...
Click to collapse
This is awesome! Thanks a bunch! One more question (probably an ignorant one) - if one flashes a new ROM, lets say CM7 after UnNamed, does the triangle reappear?
AtlanM87 said:
This is awesome! Thanks a bunch! One more question (probably an ignorant one) - if one flashes a new ROM, lets say CM7 after UnNamed, does the triangle reappear?
Click to expand...
Click to collapse
As long as you use CWM from Entropy or Siyah Kernel it should be fine and the triangle wont appear.
Weird... If an internal flash of a stock binary will clear the triangle, that makes things a LOT easier for people.
Worked perfectly on the bus home from high school it never really bothered me but was easy enough so i figured why not do it
Sent from my SGH-I777 using XDA App
Entropy512 said:
Weird... If an internal flash of a stock binary will clear the triangle, that makes things a LOT easier for people.
Click to expand...
Click to collapse
Yup, now nobody should be complaining about the triangle since there is many ways around it.
Nick281051 said:
Worked perfectly on the bus home from high school it never really bothered me but was easy enough so i figured why not do it
Sent from my SGH-I777 using XDA App
Click to expand...
Click to collapse
Could someone please explain this to me.
Facts as I understand them:
Mobile Odin uses a "flash kernel" to flash most of the elements of the software. However, it is possible to use Mobile Odin lite without the "flash kernel" to flash a kernel. The "flash kernel" is actually a version of ClockworkMod Recovery that is loaded by Mobile Odin. My assumption then is that Mobile Odin flashes the kernel internally, and then boots into ClockworkMod Recovery, its "flash kernel", to flash the rest of the software.
We currently understand that anything flashed with ClockworkMod Recovery does not affect the flash counter or the yellow warning triangle, but appearantly, Mobile Odin does not use its "flash kernel" to flash the kernel?
Charifire makes the following statement in the OP of his Mobile Odin thread:
Flashing with Mobile ODIN does NOT increase your custom kernel flash counter or make the yellow warning triangle appear.
Click to expand...
Click to collapse
So, the puzzle and the question is, if flashing a custom kernel with Mobile Odin does not make the yellow warning triangle appear, then why does flashing a stock kernel with Mobile Odin remove it?
Hmm, seems worth a try.
Odin is taking forever "dumping" since this device isn't supported. Weird.
I updated my bell note to ICS yesterdsay, and flashed cwm, odin shows PASS, after holding volume + and - while rebooting, I entered "android system recovery" I guess it's official recovery mode, instead of cwm, is there anything wrong? pls help, thanks
uzmcue said:
I updated my bell note to ICS yesterdsay, and flashed cwm, odin shows PASS, after holding volume + and - while rebooting, I entered "android system recovery" I guess it's official recovery mode, instead of cwm, is there anything wrong? pls help, thanks
Click to expand...
Click to collapse
Go here to find tools, needed to get CWM and Root....if you had root, once you updated you lost cwm and root....kk
CLICK ME
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bigjoe2675 said:
Go here to find tools, needed to get CWM and Root....if you had root, once you updated you lost cwm and root....kk
CLICK ME
Click to expand...
Click to collapse
Thanks for your reply
it was not rooted before, i flashed CWM touch from development section, but I am not able to enter CWM, I only got into "android system recovery", I cannot install busybox.
uzmcue said:
Thanks for your reply
it was not rooted before, i flashed CWM touch from development section, but I am not able to enter CWM, I only got into "android system recovery", I cannot install busybox.
Click to expand...
Click to collapse
holding the down volume and power button...does not work????
bigjoe2675 said:
holding the down volume and power button...does not work????
Click to expand...
Click to collapse
holding the volume down and power got me into downloading mode, that worked, I flashed cwm.
but to get into recovery mode, I need to hold volume up down and power, that's correct? I only entered adroid system recovery.
Thanks
Where did you put the cwm tar in Odin? It should be in the PDA section. After that yes you should be able to get in with the power and volume up buttons.
Sent from my SAMSUNG-SGH-I717 using xda premium
aevans88 said:
Where did you put the cwm tar in Odin? It should be in the PDA section. After that yes you should be able to get in with the power and volume up buttons.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
yes, I put it in pda
with a never rooted gnote, I only need to flash cwm with odin, then I should be able to enter recovery mode, am I missing something? any other files should be flashed?
Correct but you want to flash the super user zip once your in cwm if your going for root
Sent from my SAMSUNG-SGH-I717 using xda premium
I rooted my s3 and tab10.1 without any issues, it's wired this time
Idk either can you post a pic of what or Odin says when its done
Sent from my SAMSUNG-SGH-I717 using xda premium
I think post 16 of this thread may be helpful..
http://forum.xda-developers.com/showthread.php?t=1766181&page=2
I think we may have to consider a Canadian carrier specific thread as I think our recent ICS upgrade has introduced some challenges specific to those of us north of the border...
Of course. Sorry I could not be of any help
Sent from my SAMSUNG-SGH-I717 using xda premium
Same here, I flashed CWM by Odin & all was good but when Im trying to go at CWM recovery mode it just go straight Android Stock Recovery.
Please help
Sent from my SGH-I717M using xda app-developers app
FYI: I rooted my note AT&T when it had GB(stock) and when Samsung squeezed out the official ICS I updated through Kies which in turn unrooted the Note.
I read this thread -->here<-- hoping for a similar method to root the official ICS 4.0.4 WITHOUT tripping the counter. So far (if I didn't miss any info) only found modded ROMs and flashing methods. I don't want to flash I simply would like to repeat the same rooting process as that of GB.
Any suggestions?
youngunix said:
FYI: I rooted my note AT&T when it had GB(stock) and when Samsung squeezed out the official ICS I updated through Kies which in turn unrooted the Note.
I read this thread -->here<-- hoping for a similar method to root the official ICS 4.0.4 WITHOUT tripping the counter. So far (if I didn't miss any info) only found modded ROMs and flashing methods. I don't want to flash I simply would like to repeat the same rooting process as that of GB.
Any suggestions?
Click to expand...
Click to collapse
I'm interested in the same thing, given there are directions and an Odin Tar for System flash (which doesn't trip counter) for Stock Gingerbread which has root installed. Is this something the devs could look into? I know that there are a few that are working with stock and modding after stock is rooted, it would be great to have that system.tar for flashing and using ADB to install CWM and then still keep the flash counter from being tripped.
I know there is a CWM for resetting the flash counter, but that's not something I want to mess with. Have heard rumor that they can still see that you flashed something that isn't stock and that's even if you have reset the counter. Not sure on confirmation but that's what I heard. Just want to stay clean like I have already.
Thank you all for any help with this issue!!
uzmcue said:
with a never rooted gnote, I only need to flash cwm with odin, then I should be able to enter recovery mode, am I missing something? any other files should be flashed?
Click to expand...
Click to collapse
Try following this its what I used http://forum.xda-developers.com/showthread.php?p=28821450
If you updated OTA it seems us Canadians have a script that rewrites the recovery to stock.
Sent from my SGH-I717D using xda app-developers app
I tried to flash resurrection remix rom on my sgs2. But it did not boot after installation.
Now I can't get in my recovery to do a restore. It stuck on the screen which says Samsung galaxy sII
Please help I don't know what to do
Linda90 said:
I tried to flash resurrection remix rom on my sgs2. But it did not boot after installation.
Now I can't get in my recovery to do a restore. It stuck on the screen which says Samsung galaxy sII
Please help I don't know what to do
Click to expand...
Click to collapse
Just a bootloop, give this a go: http://forum.xda-developers.com/showthread.php?t=1108499
You will lose all data although, nothing on external sd card will be lost.
Also, how did you flash the ROM? If you followed the guide step-by-step, you shouldn't have ended up in a bootloop.
I wiped all partitions and then flashed the zip file.
Is it with a bootloop that you even can't get in to recovery? I'm stuck on samsung logo, not on RR logo
Linda90 said:
I wiped all partitions and then flashed the zip file.
Click to expand...
Click to collapse
Ok, well give the thread I linked above a go. You can download stock ROM's from sammobile.com, and flash through Odin. Do you know how to use Odin?
---------- Post added at 10:31 PM ---------- Previous post was at 10:23 PM ----------
Linda90 said:
I wiped all partitions and then flashed the zip file.
Is it with a bootloop that you even can't get in to recovery? I'm stuck on samsung logo, not on RR logo
Click to expand...
Click to collapse
Ah I'm stupid! You need to get into recovery for that thread! You're definitely holding the correct buttons when the phone is fully off (home + power + volume up)?
I think I will give it a go. But the threat says that you should do it from your recovery, or if you are not comfortable with the recovery way you should do it via odin. I can't get in recovery, so maybe I have an other problem..
I'm honestly a little scared of odin.
once I had to do something with odin, but that failed. so I could not get out download mode..
Linda90 said:
I think I will give it a go. But the threat says that you should do it from your recovery, or if you are not comfortable with the recovery way you should do it via odin. I can't get in recovery, so maybe I have an other problem..
I'm honestly a little scared of odin.
once I had to do something with odin, but that failed. so I could not get out download mode..
Click to expand...
Click to collapse
This is taken straight from my rooting guide. It will help you correctly set up Odin:
First off, you need Odin, which is a flashing tool specifically designed for the SGS2: Just type in "Odin 1.85" without quotations into Google and the first result should display "Odin - xdadevelopers - XDA Developers." Click on the link and Odin will download.
Now before going ahead with Odin, download Kies: http://www.samsung.com/us/kies/ ,which is like iTunes for Samsung Devices, the drivers are needed for Odin, but when the drivers have been installed, close Kies, right click on your toolbar at the bottom of your desktop, I'll assume your running Windows 7, and go into Task Manager. Now find anything with Kies running in the Task Manager, right click on them and kill them.
Once you have done this, go to "sammobile.com", sign up and download a stock ROM for the GT-I9100. I'll assume you have the international SGS2, just remove your battery and make sure it isn't the GT-I9100G. Then flash via Odin by connecting your phone, making sure Odin is configured like above, and then putting your phone in download mode, connecting it to your PC and put the file you downloaded in the PDA section and flash.
themadba said:
Ah I'm stupid! You need to get into recovery for that thread! You're definitely holding the correct buttons when the phone is fully off (home + power + volume up)?
Click to expand...
Click to collapse
Yes definitely!
Linda90 said:
Yes definitely!
Click to expand...
Click to collapse
Here is a link to the stock firmware for the GT-I9100 in the UK on my operator: http://www.sammobile.com/firmware/?page=3&model=GT-I9100&pcode=O2U&os=1&type=1#firmware
Scroll up just above the table of firmwares and choose your country and operator if possible.
themadba said:
Here is a link to the stock firmware for the GT-I9100 in the UK on my operator: http://www.sammobile.com/firmware/?page=3&model=GT-I9100&pcode=O2U&os=1&type=1#firmware
Scroll up just above the table of firmwares and choose your country and operator if possible.
Click to expand...
Click to collapse
Oke, so I need to flash an other rom through Odin and everything sould work?
Is it possible to flash a nandroid backup of my previous rom through Odin wich are on my sd?
I'm afraid the square in odin doesn't become green.. :angel:
Linda90 said:
Oke, so I need to flash an other rom through Odin and everything sould work?
Is it possible to flash a nandroid backup of my previous rom through Odin wich are on my sd?
I'm afraid the square in odin doesn't become green.. :angel:
Click to expand...
Click to collapse
Yes, if you can't get into Recovery Mode, a new flash is your only saviour. When you have flashed the ROM and hopefully everything went well, you can root your ROM by using Chainfire's CF-Root. Then you could restore a backup.
I have also a zip-file of my previous rom on my sd-card. That was codename lungo. Can I flash that zip so i don't neet to re-root lik you said?
Linda90 said:
I have also a zip-file of my previous rom on my sd-card. That was codename lungo. Can I flash that zip so i don't neet to re-root lik you said?
Click to expand...
Click to collapse
Do you know what it is/does? Also, the guide I took that segment on setting up Odin was actually written for rooting your ROM with CF-Root.
Oh, its a ROM. My bad! Well, I'm not too sure. I think if you have a backup of it, that would be safer. Rooting is real easy anyway.
Is Codename Lungo not a HTC Sensation ROM?
Oke thank you.
I will download the stock firmware from sammobile, and try to flash it with Odin. I just want it to work again (root or no root) and not have to buy a new phone
Linda90 said:
Oke thank you.
I will download the stock firmware from sammobile, and try to flash it with Odin. I just want it to work again (root or no root) and not have to buy a new phone
Click to expand...
Click to collapse
Don't thank me till it's working! Once new ROM flashed and booted, let me know.
By the way, don't use the .PIT file if one is included in the download, if you get PDA, PHONE and CSC, put in appropriate sections of Odin and flash, if just one file, put in PDA section and flash.
themadba said:
This is taken straight from my rooting guide. It will help you correctly set up Odin:
First off, you need Odin, which is a flashing tool specifically designed for the SGS2: Just type in "Odin 1.85" without quotations into Google and the first result should display "Odin - xdadevelopers - XDA Developers." Click on the link and Odin will download.
Now before going ahead with Odin, download Kies: http://www.samsung.com/us/kies/ ,which is like iTunes for Samsung Devices, the drivers are needed for Odin, but when the drivers have been installed, close Kies, right click on your toolbar at the bottom of your desktop, I'll assume your running Windows 7, and go into Task Manager. Now find anything with Kies running in the Task Manager, right click on them and kill them.
Once you have done this, go to "sammobile.com", sign up and download a stock ROM for the GT-I9100. I'll assume you have the international SGS2, just remove your battery and make sure it isn't the GT-I9100. Then flash via Odin by connecting your phone, making sure Odin is configured like above, and then putting your phone in download mode, connecting it to your PC and put the file you downloaded in the PDA section and flash.
Click to expand...
Click to collapse
Mine is the GT-i9100. Is this bad?
Linda90 said:
Mine is the GT-i9100. Is this bad?
Click to expand...
Click to collapse
That was a HUGE mistype. It is good. It should say that it shouldn't be the GT-I9100G! Good spot!
It worked!
I have a complete stock unrooted sgs2 now
Thanks alot
I'm trying to root my phone again with your rooting guide themadba. But I canot find a maching kernel version?
My kernel nr:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dial *#1234# and post results please.
Sent from my GT-I9100 using xda app-developers app
Hi guys. I finally made the change to android a few months back after iphoning for several years. I'm so glad I did. Everything I wanted that Apple wouldn't let me have is here. I wasn't too bothered about rooting up until I saw a video on youtube detailing the advantages. I was quite surprised you can get free tethering (which is something that would be very handy). Also since the jelly bean update my phone became a bit laggy and i heard you can speed it up via 'setcpu'.
After days or reading, reading and yet more reading I took the plunge and rooted my s3 i9300 via Odin. The first file I used said successful but a 'check root' app said it wasn't. I found another file for my spec and tried that and it seems to have rooted now.
So here are my questions that although I've read alot about I haven't really found an answer I'm confident with to take the next step....
1) Can I just turn on tethering on my settings or do I have to install or download a certain app to run it through? I'm on T-mobile if that makes a difference and I'm from the UK.
2) The CWM that is installed is not the same one I keep reading about. I found an updated version on this site but can I just install it via ODIN or do I need to uninstall the one currently on the phone.
3) I would like to try a fresh install of a ROM so i have a clean foundation. I'm not fussed about backing up my apps etc and all my contacts are sync'd via google. At this time I'm quite happy to keep the phone standard-ish looking while I learn more about rooting and roms and have heard cyanogenmod are more popular for the close to stock roms. I have also read they have released a 4.4. Is there a stable version yet? After I have my CWM can I just flash the ROM straight on. Any links for a stable cyanogenmod??
4) Any info on removing the bloatware?
Thanks guys in advance. I'm sure you've heard these questions time and time again. I was an Apple Jailbreaker for along time so hopefully I wont be too hard to educate.
Ben
1. What are you tethering? Simplest way is wirelessly but that doesn’t require root anyway.
2. Yes just update via odin.
3. CM is aosp based rom so it's actually fairly close to stock android rather than stock Samsung, have a look in the Android development forum for a list of custom roms. I won't recommend a particular rom as they all have benefits. Aosp roms cm included have issues due to Samsung controlling some of the proprietary software meaning some things hdmi out, FM radio etc either don't work or have limited function.
4. If you flash a custom rom, you are reducing bloat to a greater or lesser extent. But you may also be sacrificing some Google or Samsung apps depending on your chosen rom, again have a look at the rom threads as there are seriously too many to list.
And welcome to the dark side and enjoy the freedom.
Sent from my GT-I9300
Basics
STICKYS FAQS and GUIDES
http://forum.xda-developers.com/showthread.php?t=2344125
UNDERSTAND FIRST
http://forum.xda-developers.com/showthread.php?t=2362743
Network IMEI EFS
http://forum.xda-developers.com/showthread.php?t=2393289
Ghostofcain
No by tethering I just meant for my laptop or the kids ipad's etc if we're out and about with no wifi. So I can just use the usual stock tethering as opposed to having to use an app?
Is CMW the better one to use?
I shall browse the roms and try and find something that's compatible.
Thanks for your time
JJEGAN I shall have a read of these. Thanks very much.
Sent from my GT-I9300 using Tapatalk
b_kennedy said:
Ghostofcain
No by tethering I just meant for my laptop or the kids ipad's etc if we're out and about with no wifi. So I can just use the usual stock tethering as opposed to having to use an app?
Is CMW the better one to use?
I shall browse the roms and try and find something that's compatible.
Thanks for your time
JJEGAN I shall have a read of these. Thanks very much.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Stock tethering should work fine, that's what I use. If i was you I'd stick with a Samsung based rom to start with as you'll find most of the apps are available and all features should work, but once you've got the bug the skies the limit.
CWM is probably the benchmark recovery, but if you want a slightly more featured one you could go with Philz.
Just remember nandroid is your friend, keep a backup and if a ROM doesn't suit you just restore.
Sent from my GT-I9300
Many Thanks. Will read the above links tonight and let you know if I still have any questions.
Appreciated!
Sent from my GT-I9300 using Tapatalk
Hi. Well I've tried to update the CWM through Odin and it says it has passed etc but when I go back into the phone it is still the old version.
Do I need to unlock my bootloader first? I was under the impression the i9300 bootloaders are unlocked from stock?
If so I'm running 4.3 so am I right in reading that it cannot be unlocked?
Another thing. When I plug my phone into Odin nothing happens. If I connect my phone first then open Odin it recognises it. All be it could be an issue with Odin I did it this way for the initial root and it worked fine?
Please helppppppp. I got the bug now. Just like the old apple jailbreak days
b_kennedy said:
Hi. Well I've tried to update the CWM through Odin and it says it has passed etc but when I go back into the phone it is still the old version.
Do I need to unlock my bootloader first? I was under the impression the i9300 bootloaders are unlocked from stock?
If so I'm running 4.3 so am I right in reading that it cannot be unlocked?
Another thing. When I plug my phone into Odin nothing happens. If I connect my phone first then open Odin it recognises it. All be it could be an issue with Odin I did it this way for the initial root and it worked fine?
Please helppppppp. I got the bug now. Just like the old apple jailbreak days
Click to expand...
Click to collapse
You do not need to use Odin to change recoveries if you already have a custom recovery installed..There are two versions of recovery .tar.md5 (you flash these with Odin) or .zip files (you flash these with your current custom recovery)
I would also recommend using PhilZ recovery it as alot more options.
Ok thanks. So do I add the zip version to my SD card? If so how do I run it from there? Via the CWM app on my phone?
Sent from my GT-I9300 using Tapatalk
b_kennedy said:
Ok thanks. So do I add the zip version to my SD card? If so how do I run it from there? Via the CWM app on my phone?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Yep.. Add to Ext SD card and choose same option you do to flash a rom (install zip option)... Then reboot!
Cheers pal. I'm out at the mo but will try this evening and report back. Cheers
Sent from my GT-I9300 using Tapatalk
Well I tried it an still the same thing. It's been like this from the start but could this be the culprit....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-I9300 using Tapatalk
tallman43 said:
You do not need to use Odin to change recoveries if you already have a custom recovery installed..There are two versions of recovery .tar.md5 (you flash these with Odin) or .zip files (you flash these with your current custom recovery)
I would also recommend using PhilZ recovery it as alot more options.
Click to expand...
Click to collapse
Woah wait... Isn't TWRP recovery available for the S3?
Sent from my Nexus 10 using XDA Premium 4 mobile app
Should I try that then? Any particular version of the I9300 I need?
Sent from my GT-I9300 using Tapatalk
Don't flash using CWM, use the recovery, I have read reports of issues using CWM on the i9300
Sent from my GT-I9300
I did plenty of research and didn't see anything myself. What can I flash with Instead? Can I flash something straight over the top?
Sent from my GT-I9300 using Tapatalk
b_kennedy said:
I did plenty of research and didn't see anything myself. What can I flash with Instead? Can I flash something straight over the top?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
You need reboot recovery: vol+,power,home at the same tyme.
b_kennedy said:
I did plenty of research and didn't see anything myself. What can I flash with Instead? Can I flash something straight over the top?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Sorry my confusion I didn't realise you where using the cwm manager app! This is why you are having problems I never use apps to flash roms or recoveries they always seem to have problems.You need to manualy flash from recovery itself boot into recovery volume up + home+power and flash from there.
Flash PhilZ recovery from there....
Hi thanks. Maybe that's why. I've been doing volume down, home and power.
Flash using odin?
Thanks
Sent from my GT-I9300 using Tapatalk
b_kennedy said:
Hi thanks. Maybe that's why. I've been doing volume down, home and power.
Flash using odin?
Thanks
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
That's download mode lol easy mistake your not the first! Yes flash with Odin takes less than a minute to do..