http://vegaviet.com/ Vietnam forum for pantech sky
I updated ROM CM 9 V4 ics from http://www.tinhte.vn/threads/1478839/ http://www.4shared.com/zip/pv-z2ohg/A820l_CM9_Huy_Beta4.html? and my phone was bricked. According to the owner of this topic,it can be solved by the way below:
Brick sky A820l error repairing needed:
(download Driver QHSUSB_LOAD) (already have)
(Rom Sky A820l) (already have)
(Android+SLP Application ) (already have)
(download Driver Qualcomm) don't know where to find it
(Repairing brick error application) don't know which unbrick application to use???
I found application QPST and it accepted port COM 4 but I didn't know what to do next
http://forum.xda-developers.com/showthread.php?t=1468791&page=13
"My phone can't access Download Mode and Recovery" :crying:
I hope you guys on XDA forum can help me with that problem
Thanks in advance!!!
Help me plz!!!! ToT
help meeee!!!!!!!!!!!!!!!!!! ((((((((((((((
pls help meeeee
Driver needed QHSUSB_LOAD
Hi
please provide me the Driver of QHSUSB_LOAD. I am in same situation, but I think I can work if i get the driver. mail me [email protected]
yathan said:
http://vegaviet.com/ Vietnam forum for pantech sky
I updated ROM CM 9 V4 ics from http://www.tinhte.vn/threads/1478839/ http://www.4shared.com/zip/pv-z2ohg/A820l_CM9_Huy_Beta4.html? and my phone was bricked. According to the owner of this topic,it can be solved by the way below:
Brick sky A820l error repairing needed:
(download Driver QHSUSB_LOAD) (already have)
(Rom Sky A820l) (already have)
(Android+SLP Application ) (already have)
(download Driver Qualcomm) don't know where to find it
(Repairing brick error application) don't know which unbrick application to use???
I found application QPST and it accepted port COM 4 but I didn't know what to do next
http://forum.xda-developers.com/showthread.php?t=1468791&page=13
"My phone can't access Download Mode and Recovery" :crying:
I hope you guys on XDA forum can help me with that problem
Thanks in advance!!!
Click to expand...
Click to collapse
mE TOO. i CANNot access download mode... My vega now is tottaly brick ..... PLease help...
Help
Hello friends,
Has anybody found the solution to unbrick A820L. please share...
yathan said:
http://vegaviet.com/ Vietnam forum for pantech sky
I updated ROM CM 9 V4 ics from http://www.tinhte.vn/threads/1478839/ http://www.4shared.com/zip/pv-z2ohg/A820l_CM9_Huy_Beta4.html? and my phone was bricked. According to the owner of this topic,it can be solved by the way below:
Brick sky A820l error repairing needed:
(download Driver QHSUSB_LOAD) (already have)
(Rom Sky A820l) (already have)
(Android+SLP Application ) (already have)
(download Driver Qualcomm) don't know where to find it
(Repairing brick error application) don't know which unbrick application to use???
I found application QPST and it accepted port COM 4 but I didn't know what to do next
http://forum.xda-developers.com/showthread.php?t=1468791&page=13
"My phone can't access Download Mode and Recovery" :crying:
I hope you guys on XDA forum can help me with that problem
Thanks in advance!!!
Click to expand...
Click to collapse
Does it vibrate ? when you press the power button ??
Hi guys i have a sky vega IM-A820L...
its been bricked by the same rom..
i have got the phone detected with the Qualcom Drivers..
but i cant get the partition tables written again with QPST..
has anyone fixed this phone with this method..
kindly share will be highly appreciated..!!!!
come on guys isnt there anyone the forum to resolve this issue???
i have got a bricked VEGA A880S, stuck in RED SW upgrade mode. QPST does not detect phone, but detects modem, adb and fastboot does not see phone at all. I am looking for some tool like ODIN to unbrick this thing. please help
Related
Hi all
I came to this forum, to find help for my problem.
Believe me, this problem has me really break my head.
I bought a tablet zync Z930-plus with android 4.0
I began to discover it, connecting and installing applications via Google Play store.
And suddenly, in five days of use, it failed, stilling blocked at the logon android.
The last thing I remember is that I installed an application that upgrad android to 4.2 , I can't exactly remember the name of the application, but I remember that I tried to go to android 4.2. Do not blame me, because I'm not an expert, but I'm curious, and I think that all the things go well.
Now the tablet is still stucking on android logo when I turn it on.
I tried to repair it and reinstall with several method, I did the factory reset ... still nothing, one of this method is that I navigate to the official website of zync, and I downloaded the pack of updating and reinstalling the OS with the PDF tutorial, but the tablet does not connect with the computer (Windows XP), it is still stuck at android logo.
I download and install firmware with the sd card, I got a little,:laugh: but the toutche screen not work, and I came across a Chinese android:crying: !!!!!!....
I do not know what to do now.
Can you give me a hand please
some friendes in forums advised me to go and ask in xda-developers.com, they tell me that i need a firmware that work fine with the CPU of the tablet...for this, i am here, and i bring with me a picture of the "motherboard" of the tablet, in joint
Thank you
Note: If you want more information, I will pass it
Tell me more about your tablet? i can help u
mtktauseef said:
Tell me more about your tablet? i can help u
Click to expand...
Click to collapse
hi freind
thanks for your replay
this problem was sloved with a god link that i found
here is the firmware name's inet-86vs-rev01
thanks twince
Keep in touch
mahboub said:
hi freind
thanks for your replay
this problem was sloved with a god link that i found
here is the firmware name's inet-86vs-rev01
thanks twince
Click to expand...
Click to collapse
:good::good::good::good: ohk If you need any Help then .... Contact Me :- :good::good::good:
hi guys, i've been searching all over the internet for a ROM for my hs-u970 (MT6589) but unfortunately I didn't find anything so does anyone have any suggestions?
one more thing,
I've been trying to install CWM on my hisense android using mtk droid and tools v2.5.3 but each time i connect the phone it doesn't detect it, and btw I do have root access and usb debugging is enabled and I installed the adb driver for my phone,so please help me.
Thanks,
For details on the phone specs: (www(dot)hisense(dot)es/index(dot)php/en/electronic/mobiles-all/u970(dot)html) ( replace (dot) with . )
Ayman El-Qasem said:
hi guys, i've been searching all over the internet for a ROM for my hs-u970 (MT6589) but unfortunately I didn't find anything so does anyone have any suggestions?
one more thing,
I've been trying to install CWM on my hisense android using mtk droid and tools v2.5.3 but each time i connect the phone it doesn't detect it, and btw I do have root access and usb debugging is enabled and I installed the adb driver for my phone,so please help me.
Thanks,
For details on the phone specs: (www(dot)hisense(dot)es/index(dot)php/en/electronic/mobiles-all/u970(dot)html) ( replace (dot) with . )
Click to expand...
Click to collapse
Hello it looks here I hope it can be helpful to you
http://www.darksideteam.com/Tema-TUTORIAL-Root-y-CWM-Recovery-en-MTK65xx
and
http://www.darksideteam.com/Foro-Otros-m%C3%B3viles
i have pantech p8010 version JYUS08202012 i purchased it a week ago yesterday it stuck on boot and could not start homepage.i also tried to factory reset but invain then i tried to install custom Rom which i downloaded from this forum but it gives signature failed error.i also took it to market for repairing but no solution so this forum is my only solution please help me .
am kamran from pakistan
please help anyone
please anyone help me
Perhaps ODIN software could help you?
StarFire_MK2 said:
Perhaps ODIN software could help you?
Click to expand...
Click to collapse
it is not working for me
is there no expert to help me?
Hi/Hello Sir/Maam
I am a owner of a Cherry mobile Flare S3 mini, which has a Spreadtrum Chipset (Sc8830). My problem is that I accidentally flash a rom that causes it to be deadboot. I look on ways on how to revive it and I find this "Upgrade Download Tool' which is a flash tool for spreadtrum devices. But I can flash my stock rom which is in .pac format through this Upgrade Download Tool because I always get this error "_BKF_NV_W", I dont know what that means and I really need somehelp. Can somebody here help me with this error? I would appreciate any help that will come to you with regards to this. Thanks and I hope that you can help me.
Can someone help me with my oneplus X device , Once i bricke it , but i was able to unbrick it with the MediaTool , what ever its called ..
But that was before one year now i cant get into my TWRP (volume down + power button ) Also i cant factory reset it from my phone setings ,
Can someone help me so i can get my twrp back and help me establish to flash new rooms again , cause the 5.0 android is too old for now i wanna have a 7. nugat room Please help me it's important !
If soemoen experienced could help me via skype or whatevre ???
CvijetinM said:
Can someone help me with my oneplus X device , Once i bricke it , but i was able to unbrick it with the MediaTool , what ever its called ..
But that was before one year now i cant get into my TWRP (volume down + power button ) Also i cant factory reset it from my phone setings ,
Can someone help me so i can get my twrp back and help me establish to flash new rooms again , cause the 5.0 android is too old for now i wanna have a 7. nugat room Please help me it's important !
If soemoen experienced could help me via skype or whatevre ???
Click to expand...
Click to collapse
Difficult to help you with the infos you give.
I think, you'll have to use the Mega Unbrick Guide again.
https://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
The only problem would be if you're on the V14 firmware. But I can't find the relevant link right now.
Kéno40 said:
Difficult to help you with the infos you give.
I think, you'll have to use the Mega Unbrick Guide again.
https://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
The only problem would be if you're on the V14 firmware. But I can't find the relevant link right now.
Click to expand...
Click to collapse
Can you send me the recovery tool cause it's not located any more on the site , i get a 404 error that it's no more there !
https://mega.nz/#!JFIlRIxZ!jbRIlpNe-OOMbt1waB1vLxdvHejfx323FhOASm6YNAw