Related
I've put this in the Development section because whilst it is almost fully functional, it still needs a lot of development. Please be aware of this when you download it. I am not to be held responsible for anything that may happen as a result of running this app.
Requirements:
Root Access & a Custom ROM (StreakDroid 1.8.0 recommended (CONFIRMED WORKING ON 1.8.0))
Built under a 2.2 framework. If you are running anything pre-2.2 please be aware it may not work.
Please remember to remove all previous versions of the app before installing.
Simply open the app and press the "Menu" button. I hope you can figure the rest out! Enjoy!
"LED Notification FREE" has been uploaded in the Market. It has full functionality and it Ad Supported.
Please be aware that this version includes an "AdBlocker Check". This will block the app from opening if you have an adblocker installed on your phone. Sorry about this but i hate adblockers Alternatively, you can just remove all instances of Admob from your Hosts file.
Code:
[I][B][COLOR="blue"]QUICK HANDCENT FIX[/COLOR][/B]:
Open Handcent, press 'Menu > Settings > Notification settings > Popup settings'.
[B]MAKE SURE[/B] 'Screen on for popup' is [B]UNCHECKED[/B].
Handcent wont interfere with my app from then on :D[/I]
NEW TO 2.0.1
Asks for SU Access when the app first loads Fixes some weird error that happens every now and again.
Completely re-coded the SMS receiver. Much smoother now!
SMS and Gmail Notifications can be turned on or off
New settings page - done properly now, wont save anything to sdcard [you can delete your STREAKLED folder now!] Press the 'menu' button when you open the app for settings.
Permissions tweaked (should be less LED problems)
KNOWN BUGS
Changing orientation during the pattern causes problems. Just don't do it!
Notifications overwrite each other. So if an SMS message arrives and then a Gmail, only the Menu button will be lit, and vice versa.
Services cannot be stopped (only by uninstalling) FIXED - 2.0
Sometimes all the buttons will end up being lit, not sure why. [SHOULD BE FIXED]
TODO
Add options for turning the SMS and Gmail notifications on and off DONE - 2.0
Have different patterns for each DONE - 1.3
Improve the UI (sort of) DONE - 2.0
Improve the pattern flashing sequence (sort of) DONE - 2.0
Clean up the code (WIP )DONE - 2.0
Fix orientation issue
This will ALWAYS be available for free on here, on Modaco and on my website (see sig) but i have uploaded a 'donate' version on the Android Market Place priced at £1.50, just incase you fancy buying me a beer
Enjoy
Meltus said:
I've put this in the Development section because it is not fully functional and still needs a lot of development. This is basically a proof of concept app.
Requirements: Root Access (tested on 2.1 but build under a 1.6 framework so it should work on 1.6)
All you have to do is run the application, hit the home button and receive a text (or send yourself one). If your phone is locked it will wake up and dim the screen and flash the home/menu/back LEDs in a nice pattern and then keep the screen dimmed until you unlock the phone manually.
The only problem is that you will receive a Force Close error message and you will then have the re-open the app for it to work again. I am trying to fix this but will not be able to look into it for a few days so i thought i would release what i've done so far.
I will be adding settings and more patterns as soon as i can fix this FC error.
Enjoy
Click to expand...
Click to collapse
Well... GREAT!!! Thanks! It works... Was searching this kind of app for weeks. Thanks again!
Great little app. Can't wait for thenext update
Nice work.
Just out of interest though, what's the dangers of having the screen on dim all night if I get a text message at stupid o'clock?
Wouldn't want to burn anything on my screen if that is possible.
Amdathlonuk said:
Nice work.
Just out of interest though, what's the dangers of having the screen on dim all night if I get a text message at stupid o'clock?
Wouldn't want to burn anything on my screen if that is possible.
Click to expand...
Click to collapse
Screen burn is an issue on LCD screens, hence why i set it to do a dim wake lock instead of a full brightness one. Saying that, i have absolutely no idea whether screen burn would still occur but ill test it tonight and report back
On a positive note i have fixed the FC error and will release the fully working version tomorrow!!
Nice work dude ! Look forward to a full release tomorrow.
Any way to make this compatible with non rooted steaks on 1.6?
Sent from my Dell Streak using XDA App
jdmnash said:
Any way to make this compatible with non rooted steaks on 1.6?
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
No, i'm afraid not.
Without Root Access it will probably just force close.
Currently in the process of adding more LED patterns
It also now wakes the phone, unlocks the phone and displays an "SMS Message Received" popup which it then hangs at until you close it.
Do you guys think this is better or should I make it lock the screen instead?
What else should i add/change?
Meltus said:
Do you guys think this is better or should I make it lock the screen instead?
What else should i add/change?
Click to expand...
Click to collapse
I'd prefer it stayed locked, also if I read this thread correctly, it leaves the screen on (but dimmed?) is that true? I would need it to kill the screen, because as noted, it could kill your battery if you went a long time w/o clearing the alert.
Nice work so far though...
a042349 said:
I'd prefer it stayed locked, also if I read this thread correctly, it leaves the screen on (but dimmed?) is that true? I would need it to kill the screen, because as noted, it could kill your battery if you went a long time w/o clearing the alert.
Nice work so far though...
Click to expand...
Click to collapse
Yeah, that's the only problem.
unfortunately, killing the screen freezes the LEDs in whatever state they're in, completely defying the point of the app
What i could do though, is wake up the screen, flash the LEDs but leave one on and turn the screen back off. This would turn everything off apart from that 1 LED and you could use different LEDs for different notifications. I'll try that out later.
Yeah, that seems like a good idea. Maybe the Back LED for missed SMS, the Menu LED for missed call. Something like that.
That would be cool, I'll await your work and give it a try.
Well, it turns out that works miles better than what i was trying before.
Basically, it now turns the screen on, keeps it locked, flashes the LEDs, turns the screen back off and leaves the home LED on.
Give me about 10 mins and i'll put up a working version. No FC error this time
Can't wait for this!
Sent from my Dell Streak using XDA App
First post updated with a working version
None of the options work on the main screen yet, but they will.
Enjoy
I haven't tried this yet, but I just want to say THANKS! No notification light was driving me crazy! I'm gonna install it now. I like that it would kill the screen but leave the LED light on. That's perfect!
**EDIT**
Well, it didn't work perfectly. Here's what happened on my Beta Streak....
With locking disabled (I use the 'NO LOCK' widget), it turned the screen on and said 'SMS received' and the home LED was on, for about 1-2 minutes, then both went off. When I turned back on the screen and read the msg, the LED went out.
With locking enabled, like most people would be using the app, the screen turned on for a few seconds while the LED pulsed, then both went out. No notification. When I unlock and read the msg, the home LED stays on. I have to 'clear' the app in the notification tray and lock then unlock the screen to make the home LED go out.
Seems like they're little tweaks that could be needed. If you can make this work and be functional, I'll donate to your Paypal! Again, thanks for your work on this project!!
Yeah, it's still pretty much in it's 'Alpha' stage
Cheers, for the feedback, i'll look into the errors.
I know that if the screen is unlocked the Home LED will stay on until you lock/unlock the screen, but that should be an easy fix (hopefully), and i've not set up the Thread's quite right i don't think which could be causing the timing errors.
I'll be spending all of tomorrow getting this thing working so i'll report back
Awesome! You are the man!
A thought for down the road development:
Earlier today when I was thinking about this, I imagined an interface where the user could "record" their own flash sequence for each type of notification they had - email, sms, mms, missed call, etc. Just choose which notification they want to specify, click record, then tap the capacitive buttons in the sequence you want them to light up, then end the recording. Interval timing could be recorded or specified manually. Just a few ideas!
Thanks so much for this. I'll give it a run soon.
Awesome work. Wanted something like this. I hope you will be able to add notifications for misssed calls and gmail as well. Keeping my fingers crossed.
hi,
I've using Go SMS with BLN for a long time without any problems...till now.
I can't give a precise date about when Go SMS stops working with BLN, maybe 2 months ago, but indeed it's not working anymore.
I tried all the possible settings and combinations, but i just can't get it to work.
The problem is very simple...after received a message the screen goes on, the leds start to blink...then when the screen goes off, leds turn off.
I thought the problem could be on my rom (XWLPM 4.0.4) or the BLN itself, but i installed Handcent SMS, to test, and everything works like a charm...
Again, i installed Zlango, and everything works great...installed Go Sms...BLN doesn't work...
Anybody knows anything about this issue? Anyone found a possible solution?
Cheers
ruicc said:
hi,
I've using Go SMS with BLN for a long time without any problems...till now.
I can't give a precise date about when Go SMS stops working with BLN, maybe 2 months ago, but indeed it's not working anymore.
I tried all the possible settings and combinations, but i just can't get it to work.
The problem is very simple...after received a message the screen goes on, the leds start to blink...then when the screen goes off, leds turn off.
I thought the problem could be on my rom (XWLPM 4.0.4) or the BLN itself, but i installed Handcent SMS, to test, and everything works like a charm...
Again, i installed Zlango, and everything works great...installed Go Sms...BLN doesn't work...
Anybody knows anything about this issue? Anyone found a possible solution?
Cheers
Click to expand...
Click to collapse
Same problem!! :crying:
[email protected] said:
Same problem!! :crying:
Click to expand...
Click to collapse
ruicc said:
hi,
I've using Go SMS with BLN for a long time without any problems...till now.
I can't give a precise date about when Go SMS stops working with BLN, maybe 2 months ago, but indeed it's not working anymore.
I tried all the possible settings and combinations, but i just can't get it to work.
The problem is very simple...after received a message the screen goes on, the leds start to blink...then when the screen goes off, leds turn off.
I thought the problem could be on my rom (XWLPM 4.0.4) or the BLN itself, but i installed Handcent SMS, to test, and everything works like a charm...
Again, i installed Zlango, and everything works great...installed Go Sms...BLN doesn't work...
Anybody knows anything about this issue? Anyone found a possible solution?
Cheers
Click to expand...
Click to collapse
BLN works perfectly fine with gosms here.
The problem:
- because gosms turns the screen on when you receive message
The solution:
- disable screen on after you reduce message in gosms settings
How to do this:
-open gosms
-goto settings, advanced settings
-select notification
-disable screen on and unlock screen under screen settings
Problem solved
Note: Ensure, notification light is also enabled in gosms.
Good luck
Swyped from my Galaxy SII
Jokesy said:
BLN works perfectly fine with gosms here.
The problem:
- because gosms turns the screen on when you receive message
The solution:
- disable screen on after you reduce message in gosms settings
How to do this:
-open gosms
-goto settings, advanced settings
-select notification
-disable screen on and unlock screen under screen settings
Problem solved
Note: Ensure, notification light is also enabled in gosms.
Good luck
Swyped from my Galaxy SII
Click to expand...
Click to collapse
thanks! that was the problem!!
Jokesy said:
BLN works perfectly fine with gosms here.
The problem:
- because gosms turns the screen on when you receive message
The solution:
- disable screen on after you reduce message in gosms settings
How to do this:
-open gosms
-goto settings, advanced settings
-select notification
-disable screen on and unlock screen under screen settings
Problem solved
Note: Ensure, notification light is also enabled in gosms.
Good luck
Swyped from my Galaxy SII
Click to expand...
Click to collapse
I am trying to get my LED to blink, but even after disabling screen on via GO SMS Pro settings, the screen still turns on whenever there're incoming text messages. Any suggestions?
I'm awaiting a response from the GO Dev Team, but I heard they don't respond in a timely manner...I have a SIII (SGH-T999). Not root, stock 4.1.1
Thanks!
As per the title, when the screen is off and I get (for example) an sms, i'd like to screen to light up for a few seconds. I've had other phones that did this.
Is it possible with the Z2?
That depends on the app I guess? It works on Snapchat. There is an option to turn on the screen and it works.
Xernoxis said:
That depends on the app I guess? It works on Snapchat. There is an option to turn on the screen and it works.
Click to expand...
Click to collapse
Thanks for the response. I can't see such an option for the default sms app, so maybe it's not possible.
This app seems to do what I want though:
https://play.google.com/store/apps/details?id=com.lukekorth.screennotifications
AcDisplay is also amazing for this purpose. It's really gorgeous.
I seem unable to get Lightflow working. Anyone having success? (I'm not rooted).
If so, can you share what all you had to do to get it going?
I use light manager, and it works as promised, I am also not rooted. (SD). I haven't tried light flow, but I can confirm light manager works with most of the colors
Sent from my SM-N910P using XDA Free mobile app
Hmmmmm.....must be some setting problem. Just tried Light Manager, and it doesn't work for me either
ewingr said:
I seem unable to get Lightflow working. Anyone having success? (I'm not rooted).
If so, can you share what all you had to do to get it going?
Click to expand...
Click to collapse
I'm using Lightflow and it's working as usual for me. Didn't have to do anything special to make it work.
Thanks for the input guys.
Turns out that me LED indicator setting under was turned off. I believe i dud that SetdudLdudevice on initial setup, thinking i was turning off charging LEDs, and that LF had its own control.
I'm good to go now, and feeling a bit embarrassed ...
Anyone else having problems with the LED being shut off after notifications are dismissed? I have all my Light Flow notifications set to stop after I clear the notification from the notification bar. But it's not working. I'll try contacted the developer.
Weird, not had that one.
But I have noticed several problems with Lightflow. I have contacted the developer, but no respose as of yet.
With Lightflow, things I've noticed is:
1) When added a new Notification, if you test it, the LED colour does not match the one you've selected. But it'll still work for the notification.
2) Colours in the Cyan range don't seem to be replicated corretly - but I don't think that's to do with lightflow. One my phone (SM-910F in black) there's a fine, wire mesh kind of pattern over the surface of the phone, which covers the LED. Seems to distort what colour comes out.
If I look really closely, I can see a hint of the correct colour if that makes sense. Not sure how a developer could sort that out, as the program is probably working correctly.
Pretty much Sea Green, turqoise, teal, light green all seem to come out as Light blue. Even using the hex manually still results in this. Same with Light manager too. Really really annoying!
Of course it could just me my old eyes playing tricks one me!
3) Sleep mode doesn't quite work properly. If you set it to disable vribrate only, and leave everything else on, it disables everything, not just vibrate. A small issue, but hey, I'd like to use the feature.
Apart from that, it works perfectly. So nice not to have to switch on accesability to get it to work
I've noticed that no matter what setting I have it on, my tablet (M5 8.4) automatically lowers the screen brightness in Chrome and YouTube, but more noticeably in Chrome.
Any way to disable this?
Have you checked the setting menus?
Using Firefox might be a solution.
Also, Youtube in FF has background playback as long as you are using a desktop user agent.
thref23 said:
Have you checked the setting menus?
Using Firefox might be a solution.
Also, Youtube in FF has background playback as long as you are using a desktop user agent.
Click to expand...
Click to collapse
I've checked every possible setting, and read online everywhere, but to no avail. It also dims in Firefox. It dims as soon as you go into the app. After an online search, I found many Huawei owners with EMUI 8.0 having this issue. There is one solution, but it requires root and I don't want to root my device after having it for a few hours.
Funny. Would love a solution as well as this is rather annoying
Do you guys have auto brightness turned on or off?
I never really experienced this issue, but I did observe strange brightness behavior before I began to keep auto brightness permanently enabled.
Doing a quick search, I saw one person say to turn auto brightness on, I saw one person say to make sure animations aren't disabled in dev options, some say unclick 'increase readability in sunlight' in dev options. I personally wonder if the stock launcher (which I don't use) maybe is set to override the brightness level.
thref23 said:
Do you guys have auto brightness turned on or off?
I never really experienced this issue, but I did observe strange brightness behavior before I began to keep auto brightness permanently enabled.
Doing a quick search, I saw one person say to turn auto brightness on, I saw one person say to make sure animations aren't disabled in dev options, some say unclick 'increase readability in sunlight' in dev options. I personally wonder if the stock launcher (which I don't use) maybe is set to override the brightness level.
Click to expand...
Click to collapse
I somehow doubt that. I am using Nova Pro and am experiencing some weird behavior when attached to the Keyboard ... (the dimming function mentioned here is, what I believe, the erroneous function, as it works quite nice when not attached to the keyboard ...
All "your" suggestions do not work - I find this "function" somewhat annoying, even without the keyboard-thing ...
There is one solution, but it requires root and I don't want to root my device after having it for a few hours.
Click to expand...
Click to collapse
may I get a link for the root-solution? I'd like to have a look at it ...
SO I forgot to mention: M5 Pro!
kev1807 said:
I somehow doubt that. I am using Nova Pro and am experiencing some weird behavior when attached to the Keyboard ... (the dimming function mentioned here is, what I believe, the erroneous function, as it works quite nice when not attached to the keyboard ...
All "your" suggestions do not work - I find this "function" somewhat annoying, even without the keyboard-thing ...
may I get a link for the root-solution? I'd like to have a look at it ...
SO I forgot to mention: M5 Pro!
Click to expand...
Click to collapse
Well, I went through with it and rooted it. I tried the fix, and... it worked! After you're rooted, simply freeze the system process (I used Titanium Backup) called PowerGenius, reboot and no more forced-auto brightness dimming.
xKevin said:
Well, I went through with it and rooted it. I tried the fix, and... it worked! After you're rooted, simply freeze the system process (I used Titanium Backup) called PowerGenius, reboot and no more forced-auto brightness dimming.
Click to expand...
Click to collapse
hmhm. I was quite sure it was a System process - since the "bug" (dunno whether you read the thread on keyboard and brightness ...) appears with the system-icon when in Desktop-Mode ...
Great. there is a fix for this. now I need a non-root fix ... :-/
Yes, try the app ilux. Let that control brightness.
Steffe89 said:
Yes, try the app ilux. Let that control brightness.
Click to expand...
Click to collapse
Do you have a link to this app? I can't seem to find anything relevant when searching for ilux.
Just disable "power genius" this has worked for me. without root. No More auto dimming.
Disabling Power Genius will also get rid of issues involving bluetooth music playback, and will prevent apps like Google Maps from getting killed off semi-aggressively in the background (i.e. so when you map out driving directions you won't have to reenter the address as you get close to your destination).
Quick note: you have to reboot after disabling Power Genius. Merely disabling it won't immediately change anything.
Up until now I thought a reboot would bring the "wonderful" feature back ...
How comes that you mention a reboot is needed?
How do you disable it? I can only do a force stop
I'm not sure how to disable it without root (I imagine adb might work). With root, most use Titanium Backup to freeze it. I'm using Service Disabler to disable the associated services instead. Service Disabler is awesome if you are rooted, underrated app and great for EMUI because, for example, you can disable individual parts of the Tablet Manager app without breaking the features you want.
You might not need to reboot. When I initially froze it using Xposed Edge Pro, but didn't reboot, it didn't change anything for me. Could have been due to Xposed Edge Pro.
https://www.xda-developers.com/uninstall-carrier-oem-bloatware-without-root-access/
scott.eden said:
Just disable "power genius" this has worked for me. without root. No More auto dimming.
Click to expand...
Click to collapse
Was there any negative outcome from disabling power genius?
krisu253 said:
Was there any negative outcome from disabling power genius?
Click to expand...
Click to collapse
None for me.
thref23 said:
Disabling Power Genius will also get rid of issues involving bluetooth music playback, and will prevent apps like Google Maps from getting killed off semi-aggressively in the background (i.e. so when you map out driving directions you won't have to reenter the address as you get close to your destination).
Quick note: you have to reboot after disabling Power Genius. Merely disabling it won't immediately change anything.
Click to expand...
Click to collapse
I cannot find Power Genius?
I can confirm following the above article will allow you to remove the power genius package from the Mediapad M5 8.4 on EUMI 9.1 without root.
Thank you sooooo much... You can't believe how annoying this was. No need to even reboot either and it doesn't return if you do.
Now I just need a way to too keep the custom 740DPI after reboot and this tablet will be perfect