Does anyone know yet if this:
http://www.clove.co.uk/htc-one-x-cr-s650-desktop-cradle-with-speakers-99h10722-00
will work with the X+?
No, but the one for the AT&T one X should work perfectly IIRC.
"Put AT&T's One X and One X+ side-by-side, and other than the color difference you'd be hard-pressed to tell them apart. The carrier's logo is slightly different, but that's about it -- even the docking pins in the back line up perfectly."
I'm not allowed to post links yet, if you want the source, just google the above quote in quotes.
Kingsmith said:
No, but the one for the AT&T one X should work perfectly IIRC.
"Put AT&T's One X and One X+ side-by-side, and other than the color difference you'd be hard-pressed to tell them apart. The carrier's logo is slightly different, but that's about it -- even the docking pins in the back line up perfectly."
I'm not allowed to post links yet, if you want the source, just google the above quote in quotes.
Click to expand...
Click to collapse
Will do. Much obliged for that nugget!
Mmmhhh... Thought the same, but expansys EXPLICITLY states it's NOT compatible with the One X+ - whatever the reason might be.
Hi!
The CRS650 desktop cradle and the One X+ work together, but the One X+ doesn't have a dockmode..
So the cradle is only used as a charging device..
Enough for me
Kuni6774 said:
Hi!
The CRS650 desktop cradle and the One X+ work together, but the One X+ doesn't have a dockmode..
So the cradle is only used as a charging device..
Enough for me
Click to expand...
Click to collapse
Is it possible to extract the necessary things for the dockmode from the normal One X and to shift them to the One X+?
I only have the One X+ so i can't looking for it on the normal X.
that looks good but quite dear for what it is
Kuni6774 said:
Hi!
The CRS650 desktop cradle and the One X+ work together, but the One X+ doesn't have a dockmode..
So the cradle is only used as a charging device..
Enough for me
Click to expand...
Click to collapse
i have the att one x + and the HTC CR s650 dock and it does not fit. i hope this helps anyone thinking about making the purchase based on incorrect rumors.
Eltahur said:
i have the att one x + and the HTC CR s650 dock and it does not fit. i hope this helps anyone thinking about making the purchase based on incorrect rumors.
Click to expand...
Click to collapse
Sorry, but it works for me..
Using ARHD, but worked with stocked rom either..
Phone is beeing charged..
Landscape Rosie mod for custom rom now flips the screen also in dock..
Anyone tried any docks with the AT&T HOX+? I'm looking to replace my crappy old alarm clock and would prefer something that doesn't use the micro USB, but I've been unable to find anything. The HTC CR s650 seems to only work with the international HOX+, correct?
Doesn't work with one x+
I had the HTC One x and bought the speaker cradle from their website links, when my one x broke I got a one X+ as I thought all the accessories would work, physically they're identical, all cases work, but the dock doesn't work, it charges the phone but doesn't play audio.
There's no good reason for this, as the phones are virtually identical save for a few internal differences.
Rooted International HOX+ with Custom ViperX 1.0.1 ROM shows now dockmode, when connected to cradle CRS650 and works perfectly using all benefits from the cradle (charging and speakers)..
I had a One X (original dual core version) and it DOES NOT FIT the CR650 dock 100%. if you wiggle it around it will work for a second or so, but the international version and the AT&T version of the original One X have a slightly different POGO layout. Assuming the AT&T X+ has that same layout as the original AT&T One X, it wont fit. When I looked at my old One X with my AT&T One X+, the pogo pins look like they are in the exact same spot.
REF:
http://shop.htcpedia.com/htc-one-x-dock-cradle-cr-s650.html
Please note: This will NOT fit AT&T HTC One X
Hi there,
just for your information: I have the CR S650 and the international HOX+ here. Charging and speakers work as they should, but theres no dedicated dock mode in terms of software. The HOX+ will rotate when lying in the dock, but the dock app is missing. If you need it back, you have to flash a custom ROM like InsertCoin...
-Vulture- said:
If you need it back, you have to flash a custom ROM like InsertCoin...
Click to expand...
Click to collapse
No need to flash custom ROM. For dock mode on stock ROM just install two applications: DockMode.apk and HTC_Dock_Screen.apk. That is all. Tested on HOX + international with ROM 1.17.401.1.
CR-S650 modification for AT&T HOX+
After seeing someone mod the CR-S650 to fit the AT&T HOX, I ordered the dock and modified it to work with the HOX+. It was actually a lot easier than I thought because the POGO pins are only shifted over 1 space. So I took it apart, drilled a hole one space over and moved the entire POGO board over 1 slot. Now I have a working CR-S660 for my AT&T HOX+!
Moving the POGO pins over 1 slot lines up w/ the phone horizontally, but it's still a bit off vertically. I had to shave off the two small plastic tabs on the botton of the dock. This most likely means that I won't be able to use a case w/ the phone, but still very happy to have a working dock w/ POGO pins.
dafob said:
After seeing someone mod the CR-S650 to fit the AT&T HOX, I ordered the dock and modified it to work with the HOX+. It was actually a lot easier than I thought because the POGO pins are only shifted over 1 space. So I took it apart, drilled a hole one space over and moved the entire POGO board over 1 slot. Now I have a working CR-S660 for my AT&T HOX+!
Moving the POGO pins over 1 slot lines up w/ the phone horizontally, but it's still a bit off vertically. I had to shave off the two small plastic tabs on the botton of the dock. This most likely means that I won't be able to use a case w/ the phone, but still very happy to have a working dock w/ POGO pins.
Click to expand...
Click to collapse
Interesting...so HTC used a different polycarbonat housing for the ATT Hox+? Why did they do such a thing? Are there also different accessoires like car holder and so on which are using the POGO pins?
jirkab said:
No need to flash custom ROM. For dock mode on stock ROM just install two applications: DockMode.apk and HTC_Dock_Screen.apk. That is all. Tested on HOX + international with ROM 1.17.401.1.
Click to expand...
Click to collapse
Tested with HOX+ white, and works great, so many thanks!
robinbg said:
I had the HTC One x and bought the speaker cradle from their website links, when my one x broke I got a one X+ as I thought all the accessories would work, physically they're identical, all cases work, but the dock doesn't work, it charges the phone but doesn't play audio.
There's no good reason for this, as the phones are virtually identical save for a few internal differences.
Click to expand...
Click to collapse
-Vulture- said:
Hi there,
just for your information: I have the CR S650 and the international HOX+ here. Charging and speakers work as they should, but theres no dedicated dock mode in terms of software. The HOX+ will rotate when lying in the dock, but the dock app is missing. If you need it back, you have to flash a custom ROM like InsertCoin...
Click to expand...
Click to collapse
So it plays audio or not ? I do not care about dock mode, i just want it to work as alarm clock. I'm talking about HOX+ black international version with red buttons and tegra3.
?
It does play audio via music player and of course system sounds (ringtone, sms, alarm...), but no loudspeaker during calls. But thats more a problem of the jelly bean update from HTC since it worked with ICS. And i have the One X+ you described, international version.
Related
Im Looking for a nice Cradle for the Rhodium, ideally with a second battery charger in it (not vital as ive not got a 2nd battery yet)
Anyone spied any?
They've started cropping up on eBay, spotted 2 this morning.
If anyone actually gets a hold or hears of a proper battery cradle charger I'll be happy. With having the kaiser for 2 years I grew tired of having to charge my phone twice a day to meet my gadgetting needs... I really do love to play around with those phones hah..
[offtopic] Also bummer they didn't supply the phones with the VGA cable.. [/offtopic]
http://cgi.ebay.co.uk/USB-Desktop-B...3|66:2|65:12|39:1|240:1318|301:1|293:1|294:50
Would like to have one with integrated speakers, antenna and an ExtUSB connection so that the radio functions while docked.
Wiz said:
Would like to have one with integrated speakers, antenna and an ExtUSB connection so that the radio functions while docked.
Click to expand...
Click to collapse
Think I'm going to get the official HTC one, looks quite smart
this one has extra bat compartment to charge battery
audio out, usb, and power.
http://cgi.benl.ebay.be/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280355656733
daveke0201 said:
this one has extra bat compartment to charge battery
audio out, usb, and power.
http://cgi.benl.ebay.be/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280355656733
Click to expand...
Click to collapse
That looks like it will put a fair bit of strain on the extusb port. There doesn't seem to be anything else supporting the phone
I seem to buy a cradle for every phone I get, none of which are perfect (the stand that is, not the phone, although . . )
This time I am going low tech and going for something like the one my daughter got with her Nokia 5800 http://cgi.ebay.co.uk/Genuine-Nokia...66:2|39:1|72:1683|240:1318|301:0|293:1|294:50
Although I might need a bigger one due to the weight of the TP2 ( I will try hers when my phone turns up)
i build my own craddle with the HTC G300 Touch Diamond Cradle & adapter
it has no extras, it`s not the best, but it works...
if HTC build a matching adapter i will buy it....
see the pics
cope with a rasp ground,
a piece of soft plastic stuck on it so that it is softer surface....
greetz
LRC said:
i build my own craddle with the HTC G300 Touch Diamond Cradle & adapter
it has no extras, it`s not the best, but it works...
if HTC build a matching adapter i will buy it....
see the pics
cope with a rasp ground,
a piece of soft plastic stuck on it so that it is softer surface....
greetz
Click to expand...
Click to collapse
It looks good to me!
If you buy one from HTC will you sell me yours?
check out the brando site: http://shop.brando.com.hk
got 2 models, cheaper then HTC and also pretty cool (got one for TP). do its purpose!
LRC said:
if HTC build a matching adapter i will buy it....
Click to expand...
Click to collapse
they do!
check: http://www.expansys.com/d.aspx?i=179108
@ Xtreme XL
mThX i will order it
greetz
Deiota said:
check out the brando site: http://shop.brando.com.hk
got 2 models, cheaper then HTC and also pretty cool (got one for TP). do its purpose!
Click to expand...
Click to collapse
I have ordered the deluxe desktop one, I will report back on it when it comes in.
hello.
I recieved my brando cradle (deluxe) today and it looks pretty cool!
I recomend it!
Deiota said:
hello.
I recieved my brando cradle (deluxe) today and it looks pretty cool!
I recomend it!
Click to expand...
Click to collapse
Can I ask how easy it is to drop the device into the cradle? I bought a Pro2 cradle from an ebay source, and it can be a bit fiddly to line up the connector, I'm often jiggling it around for a while to line it up; whereas the Brando cradle for the HD is very easy to use, it just drops straight in. I'm loathe to buy a second cradle, but this one is just annoying me.
hi!
the brando is easy to line up the connector, of course first you must learn the position...
it's cute! I own the deluxe for a second battery, but the normal one is enough if you don't plan a second battery!
I have to agree with @deiota mine came today and I am very happy with it.
Pics of both types of chargers
I purchased both types of chargers. One for the office & one for home.
I have had them for almost a month now. Please excuse all the dust & fingerprints
Ill post the deluxe model first.
Pics of the plain charger.
I have attached pics of the plain charger.
The plain charger I purchased for usd$14.99 and the deluxe was usd$24.99. I purchased both from ebay. I received them in about a week after placing my order. Both came with free shipping.
So the total was usd$39.98 for both units.
Connections:
Deluxe model - EXTUSB docking port / MINIUSB charging port / EXTUSB sync & audio port / 3.5mm Audio Port
Plain Model - MINIUSB docking port / MINIUSB charging port / MINIUSB Sync port
Both unit came with a US style (2-prong) AC Adaptor with the following specs:
Input = 100-240vac 50/60Hz
Output = 5v 1.5A (MINIUSB)
Both models works great. I actually prefer the plain model since the HTC TP2 sits "deeper" in the docking port which seems more secure and I still have easy access to the front buttons of the phone. I usually do not listen to music when charging the phone. I have placed these docking cradles in front of my computers at home & office so, if i had to listen to music, i use my computer.
I note the thread below for the cradle for Tmob TP2 but was wondering if anyone has bought/tried/tested the official HTC desktop cradle and its options (outputs etc)
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=179339
Its about £34 in the UK and I'm just weighing up whether its worth the cost.
Many thanks
Andy
I took a hacksaw & a Dremmel to my Diamond cradle.
It might look a bit ropey when the phone isn't in it but I'm not there then!
When I am there the phone is init and it looks fine
Have my TP2 in the post and have ordered one of these:
http://www.amazon.co.uk/Desktop-Syn...UTF8&coliid=I31X9GZN1VRZW6&colid=9MBV0NZ7B0IZ
Looks similar to the one my Kaiser's sat in at the mo so should be ok.
Sampler said:
Have my TP2 in the post and have ordered one of these:
http://www.amazon.co.uk/Desktop-Syn...UTF8&coliid=I31X9GZN1VRZW6&colid=9MBV0NZ7B0IZ
Looks similar to the one my Kaiser's sat in at the mo so should be ok.
Click to expand...
Click to collapse
Not bad at all! Let us know how it goes mate if thats ok!
Andy
I bought the OEM Cradle about a month ago, its much bigger than I expected and attacts dust worse than my PS3 but it looks great.
I've got the TV out plugged in as well as the AC charger and it works fine
Only downside I've found is that if you have any case on your phone it wont fit in the holder. Bought a silcone case after I dropped it and scrached the chome, now I have to take the case off everytime I want to charge
I've been trying to find an HTC Made one specifically with the combination USB *and* battery charger slot as were available for the HTC 6700/Mogul [part # CRU 6800) ie not one of the cheapies after market with pretty shoddy battery fit..
Can't tell from the photo if the CRG 300 is that, or simply a USB charger cradle without the battery charger slot ?
http://www.windowsmobilenow.com/us/p_wm_acc1.aspx?i=179445&partner=wmusfroogle
Any ideas/suggestions ? I bought my girlfriend one of the aftermarket versions for her ATT Tilt and it's been horrible.
andyhud007 said:
I note the thread below for the cradle for Tmob TP2 but was wondering if anyone has bought/tried/tested the official HTC desktop cradle and its options (outputs etc)
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=179339
Its about £34 in the UK and I'm just weighing up whether its worth the cost.
Many thanks
Andy
Click to expand...
Click to collapse
jbsf said:
I've been trying to find an HTC Made one specifically with the combination USB *and* battery charger slot as were available for the HTC 6700/Mogul [part # CRU 6800) ie not one of the cheapies after market with pretty shoddy battery fit..
Can't tell from the photo if the CRG 300 is that, or simply a USB charger cradle without the battery charger slot ?
http://www.windowsmobilenow.com/us/p_wm_acc1.aspx?i=179445&partner=wmusfroogle
Any ideas/suggestions ? I bought my girlfriend one of the aftermarket versions for her ATT Tilt and it's been horrible.
Click to expand...
Click to collapse
well here is one that i found for the t-moble/gsm version
http://www.amazon.com/Battery-Europ...1?ie=UTF8&s=electronics&qid=1255140473&sr=8-1
it seems pretty nice, got 2 usb ports, one for charging the other for computer, and even an audio out. got the second battery charger as well. i have the cdma tp2 so i am awaiting an equivalent version. check it out though you may like it
I bought this cradle a few weeks ago and i love it so much i wanted to share it with you guys!
The good points...Universal, works with any device,
it comes with a separate charger lead off the back with different tips so you can charge other phones while Syncing.
Nice to use, no fiddly slotting it into place.And works in landscape!
its got a blue light!! anything with a blue lights got to be good right
Loads of other stuff..
Bad points...
Only shipped to Europe apparently,(found similar in US in post #3)
Have to use a Sync lead..i don't mind but some might, I actually think its better cos i can pick it up and not have to disconnect it, but hey thats just me.
Basically its cheap and great.
check out the full specs here http://www.mobilefun.co.uk/22432-Desk-Genie-Non-Slip-Charging-Desk-Stand-Reviews.htm
i just found a full review and better pic than mine!
http://www.testfreaks.com/blog/review/desk-genie-non-slip-charging-desk-stand/
Does anyone know where something comparable to this is to be found to ship to the US?
sanjsrik said:
Does anyone know where something comparable to this is to be found to ship to the US?
Click to expand...
Click to collapse
I just found this with a bit of lateral googling, its not quite as nice but similar
http://www.bestofferbuy.com/USB-20-...ource=gbase&utm_medium=cse&utm_campaign=gbase
and here http://www.dealextreme.com/details.dx/sku.26352
not black though
I think i just found it!! nice looking too...looks slick
http://www.gizfever.com/antislip-mobile-holder-with-usb-hub-p-735.html
LOL, should have known to check DealExtreme. I've been buying things from them for years. Ever seen this product. I'd recommend it highly, have two at home:
http://www.dealextreme.com/details.dx/sku.15294
sanjsrik said:
LOL, should have known to check DealExtreme. I've been buying things from them for years. Ever seen this product. I'd recommend it highly, have two at home:
http://www.dealextreme.com/details.dx/sku.15294
Click to expand...
Click to collapse
Yeah been looking into these too, seems like a cheap way to have an external drive! glad the link helped.
Something similar:
http://www.thinkgeek.com/gadgets/cellphone/c96e/
I'll do you one better and cheaper:
http://www.hardwaresphere.com/2009/06/21/anti-slip-gadget-holder-double-as-usb-card-reader/
This one appeals to me
USB Desktop Cradle with 2nd battery slot for HTC Touch Pro 2 (GSM) $ 22.95
[KDG-LX-HTP2]
Note: I don't suggest this UNIT.
Based on this Review
Special Features:
* Compatible with USB and USB2 port
* Synchronize and charge at the same time
* Protection circuit
* Comes with a LED indicator
* 2nd battery charging slot !!!
* Support PC and Mac
* A perfect complement for mobile professionals
Package Contains:
* Docking Cradle
* 1 AC Charger Adapter
* 1 USB Cable
Problems:
Cheap quality, break easy.
Second slot needs AC adapter, while cradle needs USB and not work from AC,
poor design and NO cust support.
ATTENTION!!! This cradle is for GSM Version of HTC Toch Pro 2. It will NOT work with Sprint Touch Pro 2 or Verizon Toch Pro 2!
Q: Does anyone think this "Won't" work with T-Mobile TP2 ? It isn't specifically listed on the T-Mobile specific link. ?
Cradle, yes, but not if you have a case
Hi,
I have one of those types of cradles. They are great, UNLESS...
--You have a case on your device. There is no room between the cradle back and the support back that allows you to place the device in the cradle.
--You have an extended battery. These don't (again) have any space that will allow you to put the device in the cradle since there's no room to feasibly put the device in the cradle if you have an extended battery.
I don't know why these things (cradles) have this support back and don't leave any space for any extended options.
osirisHTC.. wats the link to tht dock station for tp2.. it looks sick.
http://www.thinktouchpro2.com/thtctopro2de.html
T-Mobile HTC Touch Pro 2 Sync and Charge Desktop Charger with 2nd Battery Slot - $26.99
I ended up buying this.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250581187014
2 Battery+USB Charger for Sprint HTC Touch Pro 2 Pro2
US $11.49
T-Mobile HTC Touch Pro 2 Sync and Charge Desktop Charger with 2nd Battery Slot - $26.99[/QUOTE]
That exact same cradle is on e-bay for $13 shipped to the U.S. I bought two of them. Works great for me, and the price is right. As others have noted, it's a little fiddly to slide it on, and tends to stick when sliding it off. And it won't work with a case or an extended battery, but the film guards are ok.
Is your device the T-Mobile version?
Last cradle I bought didn't fit it.
Hey,
I am trying to attach a palm wireless charging adapter to my htc one x+ via the pogo pins. I am having difficulty making good contact with them.
Has anyone come up with a good solution? I saw a post by someone who had a pogo pin circuit board. I have no idea where he bought it. I'm really just trying to get a solid connection with the pogo pins so I'm open to any ideas.
Thanks!
http://www.google.com/translate?hl=...eitung-induktionslade-mod-fuer-das-one-x.html
Just letting you guys know that I followed this guide for the one x and It worked perfectly. I havent tested nfc, but I did the trick so it should work. I'll post photos later but right now my phone is my only camera.
...
starfox5194 said:
Just letting you guys know that I followed this guide for the one x and It worked perfectly. I havent tested nfc, but I did the trick so it should work. I'll post photos later but right now my phone is my only camera.
Click to expand...
Click to collapse
This is nuts. I love it and would try it if I was more comfortable with soldering/engineering.
Someone tried it for the one xl and it ended up causing issues because of the touch pad
Slithered from my HTC One X+
im planning to make one..but i feel like its too intrusive so ill just look for a nice thin casing and put it in between. does anybody know which pogo pin is negative or positive?
Sent from my HTC One X+ using Tapatalk 2
Anyone try Magnetor X... http://www.amazon.com/Magnector-Performance-Magnetic-Charging-Adapter/dp/B00JEN5S6A/ref=sr_1_1?s=wireless&ie=UTF8&qid=1412040478&sr=1-1
It seems like a great alternative to the dock... I don't want to always be taking out the thing to plug in... Magnetic and call it a day.\
I just bought three, arrived before my wife's Z3C (I'm getting the T-mobile Z3 when it's released). Look high quality enough.
I ordered one which it appears is in the same package as the phone so hopefully today or tomorrow. I'll report back if no-one else has by the time it arrives.
I heard these may not have enough clearance if you have certain cases on your phone.
clearance is limited, but the magnet has real bite - the only criticism is that it can lean away from the screen towards the rear of the phone, although that depends entirely how you hold it once attached - no led indicator, but the phone does that for you, and no issues as to the effectiveness of the charge (I've used 36% battery on the first day with moderate/reasonable use) - not perfect, just a lot better than you thought it would be......
rmd0311 said:
Anyone try Magnetor X... http://www.amazon.com/Magnector-Performance-Magnetic-Charging-Adapter/dp/B00JEN5S6A/ref=sr_1_1?s=wireless&ie=UTF8&qid=1412040478&sr=1-1
It seems like a great alternative to the dock... I don't want to always be taking out the thing to plug in... Magnetic and call it a day.\
Click to expand...
Click to collapse
One girl on here that I talk to said she's been using the magnetic charger on her Z2 and absolutely loves it! So I think it's worth buying (already did actually lol, but waiting for Z3 as I have the HTC One M8 right now until it gets released here in the U.S., so have to wait and see). Apparently it charges twice as fast as the regular USB wall charger does.
RockStar2005
Right, I have one of these now and can report it's excellent. The magnet is pretty strong so holds to the phone well. Only problem I've found is that the Smart Connect app sees it as the same as the dock which is a little annoying as I used the dock at night to do things like turn off bluetooth and start Sleepbot etc.
I also bought an actual magnetic charging cable (this one: http://www.mobilefun.co.uk/magnetic-charging-cable-sony-xperia-z3-z3-compact-z2-black-p41526.htm) and the magnet on that is far weaker and comes off if you touch the phone at all while charging.
I definitely recommend the Magnetor X
thanks! i definitely am going to try this!
3Shirts said:
Right, I have one of these now and can report it's excellent. The magnet is pretty strong so holds to the phone well. Only problem I've found is that the Smart Connect app sees it as the same as the dock which is a little annoying as I used the dock at night to do things like turn off bluetooth and start Sleepbot etc.
I also bought an actual magnetic charging cable (this one: http://www.mobilefun.co.uk/magnetic-charging-cable-sony-xperia-z3-z3-compact-z2-black-p41526.htm) and the magnet on that is far weaker and comes off if you touch the phone at all while charging.
I definitely recommend the Magnetor X
Click to expand...
Click to collapse
3Shirts,
The cable I bought is this one, which is made by Magnector X: http://www.amazon.com/gp/product/B00JEMESHG/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
The reviews for it appear to be strongly favorable, so I am confident it will work great. What brand is the one you posted though? Can't find the maker name anywhere.
If you scroll down on mine, it says that Magnector makes this charger with Japanese parts not Chinese, so that may be the difference? Not sure. People who I've talked to on here who have the Z2 or Z3 and this charger cable say it's amazing too. So I definitely agree with your statement, though I have yet to try it out (I have the cable but waiting for Z3's release here in the U.S. lol).
RockStar2005
RockStar2005 said:
3Shirts,
The cable I bought is this one, which is made by Magnector X: http://www.amazon.com/gp/product/B00JEMESHG/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
The reviews for it appear to be strongly favorable, so I am confident it will work great. What brand is the one you posted though? Can't find the maker name anywhere.
If you scroll down on mine, it says that Magnector makes this charger with Japanese parts not Chinese, so that may be the difference? Not sure. People who I've talked to on here who have the Z2 or Z3 and this charger cable say it's amazing too. So I definitely agree with your statement, though I have yet to try it out (I have the cable but waiting for Z3's release here in the U.S. lol).
RockStar2005
Click to expand...
Click to collapse
Since it's also Magnector I would assume the magnets on that are as good as the ones on the adapter so it's probably great. Looks to basically the same but a fully wired version rather than being a microusb adapter like the OP.
I myself have also purchased this magnetic cable check out my review in the other magnetic cable thread. :good:
3Shirts said:
Since it's also Magnector I would assume the magnets on that are as good as the ones on the adapter so it's probably great. Looks to basically the same but a fully wired version rather than being a microusb adapter like the OP.
Click to expand...
Click to collapse
Yes I agree. Thanks.
The one I got's connector is smaller and I thought that made it more practical.
RockStar2005
Deleted. Wrong thread.
Just tried mine. Works much much better then the cheap one I bought on ebay. The magnet keeps it in place if you move the phone around, when the cheap one would fall off.
Sent from my D6603 using XDA Free mobile app
How does the chraging time compare to USB port?
abhinav.tella said:
How does the chraging time compare to USB port?
Click to expand...
Click to collapse
I heard speeds are great. However, there are no data to support that claim. I bought both the Magnetor X wire and adapter to test out the sizes, convenience, etc.--they will be coming later this week. I am discharging my phone until it goes 1% or so, then charge with various cables and adapters I have in hand (including OEM). Then compare it with the Magnetor X.